The size of the module number field in the memory address is 6 bits.
Define memory address.
A memory address is a reference to a particular memory region used by hardware and software at different levels in computing.
Memory addresses are fixed-length digit sequences that are often represented and used as unsigned integers. A device or CPU can track data using a memory address, which is a special identification.
The CPU can track the location of each memory byte thanks to this binary address, which is determined by an ordered and finite sequence.
Solution Explained:
A physical address is 12 bits long since the capacity of the memory is 4096 bytes or 212 bytes.
Currently, there are 64 (= 26) interleaved memory chips, modules, and hierarchies. In order to choose the appropriate memory module, chip, or hierarchy, the higher 6 bits of the physical address will be needed.
Decimal bits for module offset
= 12 - 6
= 6 bits
To learn more about a memory address, use the link given
https://brainly.com/question/12905680
#SPJ4
Which of the following will cause a logical error if you are attempting to compare x to 5? if (x - 5) if (x = 5) if (x >= 5) e if (x <= 5)
A cause of a logical error if you are attempting to compare x to 5 if (x - 5). Hence option 1 is correct.
What is logical error?Logical error is defined as a mistake in the source code of a program that results in unexpected and incorrect behavior. This is the error that happens when a computer language's syntax rules are broken. This typically occurs when we alter the intended syntax for writing the tokens or characters in the sequence.
The code will be run by the software, but unexpected outcomes will occur. By performing a dry run, using a trace table, or setting breakpoints to help locate the specific part of code that has the logic error, logic faults are typically fixed.
Thus, a cause of a logical error if you are attempting to compare x to 5 if (x - 5). Hence option 1 is correct.
To learn more about logical error, refer to the link below:
https://brainly.com/question/28957248
#SPJ1
when he is done, he powers up his computer, no error messages are displayed, yet he is distraught because all his data is lost. why would this happen?
Data loss happens when data is unintentionally erased or when data is corrupted for any other reason. Data can be rendered by viruses, physical damage, or formatting mistakes.
What would occur if data were to be lost?When data loss is followed by security breaches, productivity timelines are also pushed back and you risk losing consumers. Your business must notify customers when sensitive data is lost or compromised, costing you their confidence and respect.
What is the term for lost data?In that data is compromised, data loss is analogous to a data breach. But in a data breach, the information is typically not affected but ends up in the wrong hands. In a data breach, data loss is possible, but the actual data is erased. A number of there are numerous causes of data loss, and they can vary by industry.
To know more about Data loss visit:-
https://brainly.com/question/1191153
#SPJ4
you are the network administrator for your company. after configuring a new computer and connecting it to the network, you discover that you cannot access any of the computers on the remote subnet by ip address. you can access some of the computers on the local subnet by ip address. what is the most likely problem?
The most likely problem is Incorrectly defined default gateway.
What is ip address?An Internet Protocol address (IP address) is a numerical label that identifies a computer network that employs the Internet Protocol for communication. An example of such an IP address is 192.0.2.1. Identification of the network interface and location addressing are the two primary purposes of an IP address.
A 32-bit number is what the Internet Protocol version 4 (IPv4) defines as an IP address. However, a new version of IP (IPv6), utilizing 128 bits for the IP address, was established in 1998 in response to the expansion of the Internet and the exhaustion of IPv4 addresses. Deployment of IPv6 has been happening since the middle of the 2000s.
Human-readable notations are used to write and display IP addresses, such as 192.0.2.1 for IPv4 and 2001:db8:0:1234:0:567:8:1 for IPv6.
To know more about ip address visit:
https://brainly.com/question/16011753
#SPJ4
michael is a new it professional in your shop. he is troubleshooting a laptop and finds he needs to enter the date and time every time the system boots up. he asked you what you think the problem may be. how do you reply?
He tries to boot his computer numerous times without success before deciding to start the troubleshooting procedure. Her PC shuts down every time she opens Excel.
what is about troubleshooting laptop?
The computer won't keep functioning while she attempts to finish a new project. Make a plan of action to tackle the issue and put the solution into practice. Your PC is likely overheated if your laptop smells like something is burning.
As soon as possible, shut down the computer and give it 10 to 15 minutes to cool. You risk permanently damaging the hard drive and internal components if you use your laptop while it consistently overheats. The computer must be turned on as the initial step. To do so, look for and activate the power.
To learn more about michael from given link
brainly.com/question/29535458
#SPJ4
refer to the download. based on the information shown in the download, what can be said of the configuration of the gi0/4 interface?
The interface duplex has been auto-negotiated. Manual configuration is supported by the vast majority of Ethernet ports.
What is the gi0/4 interface?When executing the show IP interface brief command, both And the a B can return a UP/UP state. A layer 3 ping, on the other hand, may fail. Disconnecting the wire results in a DOWN/DOWN condition. "10.100.73.0/24 [110/46] via 10.10.10.2, 00:00:01, GigabitEthernet0/1," states the OSPF entry. The words "a-full" as well as "1000" are presented on the Gi0/6 interface. This implies that the interface speed has been manually defined the with speed 1000 command, while the interface duplex has been automatically negotiated.
The destination network is 10.100.73.0 with a suffix length of /24, which is also represented by the value 255.255.255.0 in dotted-decimal notation.
To know more about gi0/4 interface , visit:
https://brainly.com/question/29318025
#SPJ4
Which method is used by a PAT-enabled router to send incoming packets to the correct inside hosts? It uses the source TCP or UDP port number on the incoming packet. It uses a combination of the source TCP or UDP port number and the destination IP address on the incoming packet. O It uses the destination TCP or UDP port number on the incoming packet. It uses the source IP address on the incoming packet. Question 17 1 pts As a DHCPv4 client lease is about to expire, what is the message that the client sends the DHCP server? O DHCPDISCOVER O DHCPACK DHCPOFFER O DHCPREQUEST
It uses the destination TCP or UDP port number on the incoming packet.
Difference between TCP and UDP:
TCP is a connection-oriented convention, though UDP is a connectionless convention. A vital contrast among TCP and UDP is speed, as TCP is similarly more slow than UDP. In general, UDP is a lot quicker, more straightforward, and proficient convention, notwithstanding, retransmission of lost information bundles is just conceivable with TCP.
One more eminent error with TCP versus UDP is that TCP gives an arranged conveyance of information from client to server (as well as the other way around), though UDP isn't devoted to start to finish correspondences, nor does it really look at the preparation of the collector (requiring less overheads and occupying less room).
to know more about TCP and UDP click here:
https://brainly.com/question/9692135
#SPJ4
What will happen when fragmentation occurs?
The fragments grow into mature, fully developed people that are clones of the original organism.
What is the fragmentation issue and why does it happen?When a process is loaded and unloaded from memory repeatedly, the free memory space becomes fragmented, which is an undesirable OS problem known as fragmentation. Because of their small size, the memory blocks cannot be assigned to the processes. Thus, the memory blocks are never utilised.Asexual reproduction or cloning in which an organism is divided into fragments occurs in multicellular or colonial organisms is called fragmentation. Each of these fragments grows into mature, fully formed individuals that are clones of the original organism.To learn more about Fragmentation refer to:
https://brainly.com/question/26260432
#SPJ1
give the different between data and information
Answer:
The Key Differences Between Data vs Information
Explanation:
Data is a collection of facts, while information puts those facts into context.
Which of the following is not a method of classification? · Qualitative · Chronological · Time Series · Spatial
Classification is a process for grouping together different types of organisms. We organise objects into categories according to their features when we classify them.
What is called classification?The process of classifying involves dividing different elements into different categories. Business regulations, class distinctions, or a mathematical function could all serve to define these classes.
The process of classifying the organisms into categories is referred to as classification. By grouping items according to similar traits, we may categorize them.
Classification is the process of grouping and organising known species into various groupings based on their similarities and differences. Artificial classification, Natural classification, and Phylogenetic classification are the three different types of classification.
Both supervised classification and unsupervised classification fall into the category of common classification techniques.
Typically, spatial approaches are not regarded as a method of data classification.
Therefore, the correct answer is option d) Spatial.
To learn more about classification refer to:
https://brainly.com/question/385616
#SPJ4
we’re interested in learning about some of the ways that you explore your interests. list some resources and outlets that you enjoy, including but not limited to websites, publications, journals, podcasts, social media accounts, lectures, museums, movies, music, or other content with which you regularly engage.
The introduction, body, and conclusion are the three main sections of a standard essay. You may compose and organise an essay with the aid of this fundamental essay structure.
Why are you interested in attending Bharathiar University? In Coimbatore, Tamil Nadu, India, there is a public state institution called Bharathiar University. The university, which bears Subramania Bharati's name, was founded in February 1982 in accordance with the Bharathiar University Act, 1981 (Act 1 of 1982), and it received official recognition from the University Grants Commission (UGC) in 1985.The school of distance learning at Bharathiar University was accredited in 1991. Therefore, it is a reliable organisation. The DEB (DEC) has approved all distance learning courses, and Bharathiar University is rated #1376 in the world among all universities. Schools are rated based on how well they perform against a set of generally recognised measures of quality. Learn more about our school rankings here.Learn more about essay refer to :
https://brainly.com/question/25694589
#SPJ4
true or false. when chrome stores user login information, usernames and passwords, it hashes the values and stores the hash digests. this is done to protect the usernames and passwords and prevent them from being revealed to anyone with access to the chrome user files.
TRUE: Chrome hashes the data and stores their hash digests while storing user login information, including usernames and passwords.
Explain the working of Chrome?The open source Chrome browser can be used to execute web-based applications and access the Internet.
This open source Chromium project serves as the foundation for the Chrome web browser. Launched Chrome in 2008 & updates it frequently. Get tailored search results which appear as away as you type using the Chrome browser. Sync settings and bookmarks between all of your devices. Utilize the tools from Workspace, including Docs, Worksheets, Slides, and more.TRUE: Chrome hashes the values then stores their hash digests for storing usernames, passwords, and login information for users.
Thus, the passwords and usernames are shielded in this way so that they can't be divulged to anyone who has access to a chrome user files.
To know more about the Chrome, here
https://brainly.com/question/16898264
#SPJ4
what is a possible method for ensuring that the correct rows are deleted from the databse before thedelte statement is run?
smartphones and other mobile devices often can function as a portable media player. a. true b. false
Yes, it’s true that Smartphones and other mobile devices often can function as Portable media players. All such portable devices are pretty handy to use.
Every smartphone today is a portable media player, although there were several different handheld players that could store and play music before the 2007–2012 smartphone boom.
Any portable electronic device that can handle digital media is referred to as a portable media player (often abbreviated to PMP). Digital music, audiobooks, and video are just a few of the media file types that can be played, depending on the device.
Some of the more complex devices function as personal digital assistants and offer cutting-edge features like Wi-Fi (PDAs). Modern cell phones are frequently referred to as portable digital media players due to their portability and comprehensive playback capabilities.
To learn more about Portable devices click here:
brainly.com/question/19340665
#SPJ4
which backup and restore function can you use to create a system image that includes the apps you have installed?
Recovery Drive System can you use to backup and restore function create a system image.
Is recovery drive same as backup?Your windows will be restored using a recovery disc. But a system backup will allow you to restore Windows to its previous state. You won't need to re-configure it because it will retain all of your settings and data. All system files and user files are included in a system backup.A system image is a more sophisticated kind of a recovery disk, despite the fact that they seem extremely similar. A system image would restore the complete system, but the recovery disk can only be used to reinstall Windows on the computer (or to address specific problems).To learn more about Recovery Drive System refer,
https://brainly.com/question/11103921
#SPJ4
Why won't my brainly account level up?
Well, you need to have 5 brainiest answers plus 500 points. So, in order to level up in brainly you need 500 plus 5 brainiest.
What is brainly?Brainly is a Polish company with headquarters in New York City. It is a social learning platform where millions of students and teachers work together to solve academic problems. The mission of Brainly is to encourage students to share and explore knowledge in a collaborative environment.
It can also be used to ask and answer homework questions by students, parents, and teachers. The platform includes n elements such as points and ranks. It encourages users to participate in the online community by answering questions posted by other users. Brainly reported 350 million monthly users as of November 2020, making it the most popular education app in the world.
Learn more about level up
https://brainly.com/question/7853380
#SPJ1
Answer:
This is because to level up, you need a certain number of points and brainliest answers! To get this you can always keep answering questions to get your points up and whenever you complete an answer which is superior than any other, the user may choose to give you brainliest!
Hope this helps, have a lovely day! :)
besides the .net framework 4.8, what other version of the .net framework does windows 10 provide as a feature?
Windows 10 includes the following versions of the .NET framework as a feature:
NET Framework 3.5 NET Framework 4.8To see which versions of the .NET framework are installed on your computer, you can follow these steps:
Open the Start menu and type "appwiz.cpl" in the search box.Press Enter. This will open the Programs and Features window.In the list of installed programs, look for entries that begin with "Microsoft .NET Framework". The version number will be listed in parentheses after the name.Note that the .NET Framework is a development platform that allows developers to create applications for the Windows operating system. It is not something that most users will interact with directly, but it is used by many applications and is an important part of the Windows ecosystem.
To know more about .NET framework, visit: https://brainly.com/question/29750412
#SPJ4
checking to determine whether the proper screener questions were invoked would be part of which step in the data analysis procedure? validation coding machine cleaning data checks and balances
Which step in the data analysis process-Validation-invokes a check to see if the appropriate screener questions were used.
What is data analysis process?Although numerous groups, organizations, and specialists approach data analysis in various ways, most of them may be boiled down into a general description.
Data analysis is the process of modifying, processing, and cleaning raw data in order to obtain useful, pertinent information that supports commercial decision-making.
The process offers helpful insights and statistics, frequently presented in charts, graphics, tables, and graphs, which lessen the risks associated with decision-making.
Every time we make a decision in our daily lives, we may observe a basic example of data analysis by assessing what has happened in the past or what will happen if we take that action.
In its simplest form, this process involves looking at the past or future and making a choice based on that analysis.
Hence, Which step in the data analysis process-Validation-invokes a check to see if the appropriate screener questions were used.
Learn more about data analysis process click here:
https://brainly.com/question/29376166
#SPJ4
message authentication codes (mac) and digital signatures both serve to authenticate the content of a message. which of the following best describes how they differ? (a) a mac can be verified based only on the message, but a digital signature can only be verified with the secret key used to sign the message (b) a mac can be verified based only on the message, but a digital signature can only be verified with the public key of the party that signed the message. (c) a mac can only be verified with the secret key used to generate it, but a digital signature can be verified based only on the message. (d) a mac can only be verified with the secret key used to generate it, but a digital signature can be verified with the public key of the party that signed the message.
Digital signatures employ a private/public key pair, as opposed to MACs, which use private keys to allow a message receiver to confirm that a message hasn't been altered during transmission. Thus, the right response is (d).
What exactly are private and public keys?Some people have compared public keys to a company's website address in that they are both public and easily searchable by anyone. Public keys for asymmetric encryption can be distributed among system users. The sender encrypts his message using the public key once he has it.
Each public key is accompanied by a different private key. A private key is similar to a front door key of a building that only you have a copy of. One of the primary distinctions between the two kinds of keys is outlined by this. Only you can enter through the front door thanks to the private key. You utilize this private key to decipher messages that are encrypted.
These keys work together to protect the confidentiality of the sent data. Without the associated private key, a message encrypted with the public key cannot be deciphered.
To know more about Digital Signatures, visit:
https://brainly.com/question/20463764
#SPJ4
an example of a problem that might be solved recursively is searching files under a directory. group of answer choices true false
Recursive algorithms can be used to solve problems such as searching files under a directory. Recursion is a technique that involves breaking down a problem into smaller, simpler subproblems until a solution is found. This can be useful in file searching, as the algorithm can look through a directory, recursively searching all of its subdirectories until it finds the file it is looking for.
The Benefits of Recursive Algorithms for File SearchingRecursion is a powerful technique that can be used to solve a variety of problems, including searching files under a directory. This article will explore the advantages of using recursive algorithms for file searching, as well as discussing the ways in which these algorithms can be implemented.
Recursive algorithms are an effective way to search for files under a directory. They allow for a more efficient search, as the algorithm can look through a directory, recursively searching all of its subdirectories until the file is found. This is especially useful when searching for files in large file systems, as it eliminates the need to manually search through each directory. As a result, recursive algorithms can save time and resources when searching for files.
Learn more about searching files :
https://brainly.com/question/512733
#SPJ4
assume that ip has been declared to be a pointer to int and that result has been declared to be an array of 100 elements. assume further that ip has been initialized to point to an element in the first half of the array. write a statement that makes ip point to the next element in the array.
A statement that makes IP point to the next element in the array: IP = &enrollment[section];
What are the pointers in C?
Pointers in C are used to store the address of variables or a memory location. This variable can be of any data type i.e, int, char, function, array, or any other pointer. The size of the pointer depends on the architecture.
What are pointers used for?
Pointers are used extensively in both C and C++ for three main purposes: to allocate new objects on the heap, to pass functions to other functions. to iterate over elements in arrays or other data structures.
What are the types of pointers?
There are majorly four types of pointers, they are:
Null Pointer.Void Pointer.Wild Pointer.Dangling Pointer.What are the advantages of pointers?
Pointers save memory space. Execution time with pointers is faster because data are manipulated with the address, that is, direct access to memory location. Memory is accessed efficiently with pointers.
To know more about pointers:
https://brainly.com/question/29063518
#SPJ4
a scanner connected to your mac is giving you problems, and you suspect corrupted device drivers. what should you do first?
Whenever you suspect that the device drivers of an input device like a scanner are corrupted, you must first download and install the scanner's manufacturer's drivers. After that, update MacOS.
An optical device that "reads" a picture and converts it to a digital signal is referred to as a scanner, image scanner, or optical scanner. A scanner, for instance, can be used to turn a printed image into a digital file that can be altered on a computer.
A USB cable is now the most popular way to connect an image scanner to a computer out of all the interfaces available.
It transforms physical items (such as paper or picture) into digital data that a computer can store or manipulate. Like a printer, a scanner can only send data to a computer; it cannot receive data from a computer.
To learn more about Input devices click here:
brainly.com/question/14452058
#SPJ4
the file name of a specific web page always appears first in the url. group of answer choices true false
False, A specific web page's file name is always listed first in the Uniform Resource Locator (URL).
A reference to an online resource that defines its location on a computer network and a method for getting it is referred to by a Uniform Resource Locator (URL), often known as a web address. Although many people mistakenly use the terms "URL" and "URI" interchangeably, a URL is a particular kind of URI. URLs are most frequently used to refer to web pages (HTTP), but they can also be used for file transfers, email, database access, mailto, and many more purposes.
The address bar on the top of a web page in the majority of web browsers shows the URL of the page. An example of a common URL is http://www.example.com/index.html, which denotes a protocol (HTTP), hostname (www.example.com), and file name (index.html).
Learn more about Uniform Resource Locator here:
https://brainly.com/question/17587028
#SPJ4
Which of the following is the most complete cloud computing service model?
a) PaaS
b) IaaS
c) CaaS
d) SaaS
The most complete type of cloud computing service model is SaaS. Software as a service, or SaaS, is a method of delivering applications via the Internet.
Which cloud computing service model is the most complete?The cloud computing service model has to contain the hardware, software, and real solution for it to work well. Therefore, the SaaS model includes all of these features. The most complete cloud computing service model comprises a vendor's provision of both the solution and the required processing hardware and software.
A cloud provider uses the software as a service (SaaS) model of software delivery to host programs and make them available to consumers through the internet.
Therefore the correct answer is option d ) SaaS.
To learn more about Saas model refer to :
brainly.com/question/17970803
#SPJ4
which of the following are benefits of parallel and distributed computing? i. distributed computing improves the speed at which an individual computer executes a program ii. parallel computing scales more effectively than sequential computing iii. distributed computing allows larger problems to be solved quicker
By setting up these networked computers to collaborate on a problem, parallel or distributed computing can take advantage of them and speed up the process of finding solutions.
What is distributed and parallel computing?The basic purposes of parallel and distributed computing differ significantly from one another.
By splitting up a computational activity into smaller jobs and distributing them among various processors inside a single computer, parallel computing, also known as parallel processing, speeds up the process. On the other side, distributed computing makes advantage of a distributed system, like the internet, to expand the amount of computing power available and make it possible for larger, more sophisticated activities to be carried out across several workstations.
A type of computation known as parallel computing involves running several tasks or processes concurrently. Distributed computing, in contrast, is a form of computing in which the parts are spread across multiple networked systems and communicate with one another to coordinate their operations.
To know more about Parallel Computing, visit:
https://brainly.com/question/20769806
#SPJ4
Which will have an output of 7.0?
>>> from math import root
>>> root(49)>>> from math import root >>> root(49) ,
>>> from math import sqrt
>>> sqrt(49)>>> from math import sqrt >>> sqrt(49) ,
>>> from root import math
>>> root49)>>> from root import math >>> root49) ,
>>> from sqrt import math
>>> sqrt(49)>>> from sqrt import math >>> sqrt(49) ,
The Python sequence of commands that will have an output of 7.0 is given as follows:
from math import sqrt.sqrt(49).Hence the second option is correct.
How to calculate the square root of a number in Python?The square root of a number in Python is calculated using the math library, which contains the command sqrt(x) that returns the square root of number x, and has to be imported as follows:
from math import sqrt.
Then, after the library is imported, the command to calculate the square root of the number x is given as follows:
sqrt(x).
The square root of 49 is of 7, as:
7 x 7 = 7² = 49.
Hence the following command will have the desired output of 7:
sqrt(49).
Meaning that the second option is correct.
The first and third options are wrong because of the wrong command to calculate the square root, while the fourth option is wrong for the wrong command to import the library.
More can be learned about Python programming at https://brainly.com/question/26497128
#SPJ1
you work for a small isp. several of your customers have called to complain about slow responses from a popular website. you suspect that network congestion is at fault. which tcp/ip utility would help you determine where the congestion is occurring?
Tracert TCP/IP utility would help you determine where the congestion is occurring.
What is a website?
The term "website" first appeared in the English language in 1994, according to the Online Etymology Dictionary. It combines "Web," or in the Internet sense, with "Site." A website sometimes referred to as a website, is a compilation of Web pages and related information that is accessible via a single domain name and made available on at least one Web server. In order to better explain crucial concepts to users, the material is frequently provided on a website in the form of images or videos. Additionally, visitors may be sold goods or services via a website. A website, such as the one for Computer Hope, is composed of numerous web pages.To learn more about the website refer to:
https://brainly.com/question/28431103
#SPJ4
How can an area be made secure from a non-secured area via two interlocking doors so that only authorized persons can enter? Using a pit Using a mantrap Using a closet Using a lockout
The answer of this question is by using mantrap
What is a mantrap?A mantrap is a little space with an exit door on the other wall and an entrance door on one wall. A mantrap's door cannot be opened until the door to its opposite has been shut and locked.
In physical security, mantraps are most frequently used to demarcate non-secure areas from safe ones and to restrict access.
They are also used in high-tech manufacturing to create clean room entry and exit chambers.
Mantraps were utilized in the Middle Ages to scrutinize visitor identification in jails.
The interlocking doors used in modern mantraps are interfaced such that when one door is unlocked, the other one locks on its own.
To know more about the entry control roster, visit:-
https://brainly.com/question/14991579
#SPJ4
you have a windows 10 system that is having issues connecting to other machines on the network. you want to see the tcp/ip details to make sure that the user is using dhcp and that the assigned ip address is accurate. which command-line utility and switch can you use to do this?
The host-based, two-way network traffic filtering offered by Windows Defender Firewall with Advanced Security prevents illegal network traffic from entering or leaving the local device.
What is Windows Defender Firewall ?Essential scriptlets for automating Windows Defender Firewall management are provided in the Windows Defender Firewall with Advanced Security Administration with Windows PowerShell Guide.
The automation of Windows Defender Firewall administration is intended for usage by IT professionals, system administrators, IT managers, and others.
You may control your firewall and IPsec setups using Windows PowerShell.
It will be simpler for you to set policies and keep track of network conditions than it was with netsh thanks to this object-oriented programming environment.
Through the syntax and parameters in each cmdlet, Windows PowerShell enables self-discovery of network settings.
This post explains how typical activities were carried out in netsh and how you can complete them using Windows PowerShell.
Hence, The host-based, two-way network traffic filtering offered by Windows Defender Firewall with Advanced Security prevents illegal network traffic from entering or leaving the local device.
Learn more about Windows Defender Firewall click here:
https://brainly.com/question/29658087
#SPJ4
Why is this statement false? "Docker is the only popular choice for microservices deployment".
Answer:
The statement "Docker is the only popular choice for microservices deployment" is false because there are other popular choices for microservices deployment in addition to Docker.
Explanation:
Microservices are a software architecture style in which a large application is broken down into smaller, independent components that can be developed and deployed separately. These components, or microservices, are often deployed in containers, which are lightweight, standalone executable packages that include everything an application needs to run, including code, runtime, system tools, and libraries.
Docker is one popular choice for deploying microservices, as it is a containerization platform that makes it easy to package, deploy, and manage microservices. However, it is not the only popular choice. Other popular containerization platforms for microservices deployment include Kubernetes, which is an open-source container orchestration system, and OpenShift, which is a cloud-based container application platform.
Therefore, the statement "Docker is the only popular choice for microservices deployment" is false, as there are other popular choices for microservices deployment in addition to Docker.
The claim is untrue because there are numerous ways to install microservices. In a microservices architecture, Docker usage is not required.
What are microservices?An architectural pattern known as a microservice architecture, which is a variation of the service-oriented architecture structural style, organises an application as a series of loosely connected, fine-grained services that communicate using simple protocols.
Different sets of libraries and frameworks add to the complexity and expense of deploying microservices code.
All of these problems are overcome while also delivering more via Docker technology. You can package each microservice as a distinct container using Docker.
Because there are multiple ways to install microservices, the assertion is incorrect. It is not necessary to use Docker in a microservices architecture.
Your system or application can be built using a microservices design, and it can then be deployed entirely on hardware.
Thus, the given statement "Docker is the only popular choice for microservices deployment" is false.
For more details regarding microservices, visit:
https://brainly.com/question/26248787
#SPJ2
With respect to IOT security, what term is used to describe the digital and physical vulnerabilities of the IOT hardware and software environment?
Question 4 options:
Traffic Congestion
Device Manipulation
Attack Surface
Environmental Monitoring
Answer:
Attack Surface
Explanation:
In the context of IOT security, the attack surface refers to the sum total of all the potential vulnerabilities in an IOT system that could be exploited by attackers. This includes both the digital vulnerabilities, such as software bugs and insecure network protocols, and the physical vulnerabilities, such as weak physical security or easily accessible hardware components. Understanding and reducing the attack surface is an important part of securing IOT systems.
