For an ohmic resistor, resistance is the proportionality constant for: A.potential difference and electric field B.current and electric field C.current and length D.current and cross-sectional area E.current and potential difference

Answers

Answer 1

E. current and potential difference. Ohmic resistors obey Ohm's Law which states that the current (I) flowing through the resistor is directly proportional to the potential difference (V) across its terminals.

What is resistor?

A resistor is an electrical component that is used to limit or regulate the flow of electrical current in a circuit. It is made of a conductive material, such as metal, that has a specific amount of resistance to the flow of current. Depending on the type of resistor, the amount of resistance can be fixed or variable. Fixed resistors have a single resistance value, whereas variable resistors can be adjusted to different resistance values. Resistors are used to protect components from excessive current, to provide bias to other components, to help control voltage, and to limit and regulate power in circuits.

This relationship can be expressed mathematically as V = IR, where R is the resistance of the resistor. Thus, for an ohmic resistor, resistance is the proportionality constant for current and potential difference.

To learn more about resistor
https://brainly.com/question/30611906
#SPJ4


Related Questions

59) A sealed cylinder fitted with a movable piston contains ideal gas at 27°C, pressure 0.500 × 105 Pa, and volume 1.25 m3. What will be the final temperature if the gas is compressed to 0.800 m3 and the pressure rises to 0.820 × 105 Pa?
A) 42°C
B) 68°C
C) 130°C
D) 250°C
E) 150°C

Answers

The final temperature of the gas is 68°C. Answer: (B) Temperature is a fundamental concept in thermodynamics, the branch of physics that deals with heat and energy transfer.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a system. It is commonly measured in degrees Celsius (°C) or Fahrenheit (°F), or in the Kelvin (K) scale, which is based on the theoretical lowest possible temperature, known as absolute zero.

We can solve this problem using the ideal gas law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in kelvin.

Since the cylinder is sealed, the number of moles of gas will remain constant. Therefore, we can write:

P1V1/T1 = P2V2/T2

where subscripts 1 and 2 refer to the initial and final states, respectively.

Substituting the given values, we get:

(0.500 × 105 Pa)(1.25 m3)/(300 K) = (0.820 × 105 Pa)(0.800 m3)/T2

Solving for T2, we get:

T2 = (0.820 × 105 Pa)(0.800 m3)/(0.500 × 105 Pa)(1.25 m3) × 300 K

T2 = 68°C

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ4

how many years it would take a galaxy (1 mpc away) to reach its current position (at a speed of 70 km/s)?

Answers

It would take approximately 14.3 billion years for a galaxy located 1 Mpc (megaparsec) away to reach its current position while moving at a speed of 70 km/s.The speed of light is used as a standard for measuring distances in astronomy. 1 Mpc is equal to 3.26 million light-years. Therefore, a galaxy located 1 Mpc away is 3.26 million light-years away.

To calculate the time it would take for the galaxy to reach its current position, we can use the formula:
The distance is 1 Mpc or 3.26 million light-years. We need to convert the speed from km/s to light-years per year. One light-year is approximately 9.46 trillion km.
70 km/s = 70 km/s x (3.1536 x 10^7 s/year) / (9.46 x 10^12 km/year)
70 km/s = 0.0000234 light-years per year

Now we can plug in the values:
Time = 3.26 million light-years / 0.0000234 light-years per year
Time = 1393162.39 years or approximately 14.3 billion years
Therefore, it would take about 14.3 billion years for the galaxy to reach its current position while moving at a speed of 70 km/s.

To know more about galaxy visit:
https://brainly.com/question/31361315

#SPJ11

The rainbow seen after a rain shower is caused by:
A.diffraction
B.interference
C.refraction
D.polarization
E.absorption

Answers

The rainbow seen after a rain shower is caused by refraction.

What does refraction mean?

Refraction is the result of a wave's direction changing as it travels from one medium to another due to a change in speed.

A rainbow will always form in the opposite direction from where the Sun is. The water droplets perform the role of tiny prisms. The incident sunlight is first refracted and dispersed before being internally reflected and then refracted once more when it exits the raindrop.

Refraction, dispersion, and total internal reflection are all factors in the production of a rainbow. A water droplet is illuminated by the sun. The light bends or refracts as it enters the raindrop. White light is divided into seven different colors as a result of the slowing of light.

To learn more about Refraction use:

https://brainly.com/question/27932095

#SPJ4

Is the mass of an alpha particle greater than, less than, or equal to the mass of an electron? Less tharn Greater than Equal to

Answers

The mass of an alpha particle is much greater than the mass of an electron. An alpha particle is composed of two protons and two neutrons, whereas an electron is a single particle.

What is neutrons?

Neutrons are subatomic particles with no electric charge. They are found in the nucleus of an atom, along with protons, and have a mass slightly greater than that of the proton. Neutrons play a key role in nuclear reactions, since their presence inside the nucleus can affect the stability of the atom. They can also be used to induce nuclear fission, which is the process of splitting a nucleus into two or more smaller nuclei. Neutrons can also be used to induce nuclear fusion, which is the process of combining two or more nuclei into a single nucleus. Neutrons are also used in medical imaging applications, such as PET scans and SPECT scans, to detect abnormal tissues or tumors in the body.

The mass of an alpha particle is approximately [tex]6.644 x 10^{-27}[/tex] kg, whereas the mass of an electron is approximately [tex]9.109 x 10^{-31} kg[/tex], making the mass of an alpha particle approximately 730 times greater than the mass of an electron.


To learn more about neutrons
https://brainly.com/question/29121214
#SPJ4

Complete Question:

shapley used the positions of globular clusters to determine the location of the galactic center. could he have used open clusters? why or why not?

Answers

Shapley used globular clusters to find the galactic center because they are more stable and widespread than open clusters, which are young and less numerous and located mainly in the Milky Way's disk, making them less reliable for locating the galactic center.

Shapley used globular clusters to determine the location of the galactic center because they are much older and more widely distributed throughout the Milky Way compared to open clusters.

Open clusters are young and less numerous, and as a result, they are located primarily in the disk of the Milky Way and not as far out as globular clusters. This makes it difficult to determine the position of the galactic center accurately, as there would be a higher chance of error due to the uncertainty in the distances to the open clusters.

Additionally, open clusters are more affected by the galactic disk's interstellar matter and gravitational forces, making it difficult to trace their orbits accurately.

On the other hand, globular clusters are located in the halo of the Milky Way, making them less influenced by the disk's interstellar matter and gravity, and their orbits are easier to track.

Therefore, Shapley could not have used open clusters to determine the location of the galactic center as they are less widely distributed and less stable than globular clusters.

In summary, Shapley used globular clusters to determine the location of the galactic center because they are more widely distributed and stable than open clusters.

Open clusters are young and less numerous, primarily located in the disk of the Milky Way, making them less reliable for determining the galactic center's position due to the higher uncertainty and gravitational forces of the galactic disk.

To know more about Milky Way refer here:

https://brainly.com/question/30714548#

#SPJ11

How old must one be to register a vehicle in NJ?

Answers

The age required for the individual to register a vehicle in NJ is 18 years.

In the state of New Jersey, the minimum age requirement for registering a vehicle varies depending on the type of vehicle being registered. For a passenger car, motorcycle or commercial vehicle, the minimum age requirement is 17 years old. However, if the vehicle is a commercial trailer, the minimum age requirement is 18 years old. Additionally, if the vehicle is being registered by a business or corporation, there is no age requirement. It's important to note that in order to register a vehicle in New Jersey, the individual must have a valid driver's license issued in the state. The registration process involves providing proof of ownership, proof of insurance, and payment of registration fees.

Furthermore, individuals under the age of 18 are required to have parental consent in order to obtain a driver's license or register a vehicle. Additionally, there may be restrictions on driving and vehicle registration for individuals under the age of 18, such as requiring a learner's permit or provisional license.

To know more about license please visit:

https://brainly.com/question/19477385

#SPJ11

a mass on a string of unknown length oscillates as a pendulum with a period of 7.8 s . parts a to d are independent questions, each referring to the initial situation.

Answers

Part A: The period will remain unchanged in pendulum, Part B: The period will increase, Part C: The period will decrease, Part D: The period will remain unchanged.

What is pendulum?

A pendulum is a weight suspended from a pivot so that it can swing freely. When a pendulum is displaced from its resting equilibrium position, it is subject to a restoring force due to gravity that will accelerate it back toward the equilibrium position. When released, the restoring force combined with the pendulum's mass causes it to oscillate about the equilibrium position, swinging back and forth.

Part A: The period will remain unchanged because the mass does not affect the period of a pendulum.

Part B: The period will increase because a longer string will cause the pendulum to swing slower. The new period will be approximately 7s.
Part C: The period will decrease because a shorter string will cause the pendulum to swing faster. The new period will be approximately 1.75s.
Part D: The period will remain unchanged because the amplitude does not affect the period of a pendulum.

To learn more about pendulum
https://brainly.com/question/26449711
#SPJ4

Complete Question:
A mass on a string of unknown length oscillates as a pendulum with a period of 3.5s. Parts a to d are independent questions, each referring to the initial situation. What is the period if:

Part A: the mass is doubled? (s)

Part B: the string length is doubled? (s)

Part C: the string length is halved? (s)

Part D: the amplitude is doubled? (s)

15) A hole in a brass plate has a diameter of 1.200 cm at 20°C. What is the diameter of the hole when the plate is heated to 220°C? The coefficient of linear thermal expansion for brass is 19 × 10-6 K-1.
A) 1.205 cm
B) 1.195 cm
C) 1.200 cm
D) 1.210 cm

Answers

According to the question the diameter of the hole when the plate is heated to 220°C is 1.210 cm.

What is diameter?

Diameter is a term used to describe the measurement of the distance across a circle, both horizontally and vertically. It is the longest measurement in a circle, and is always equal to twice the length of the radius. The diameter is computed by multiplying the radius by two, or by measuring the circumference and dividing it by pi (π). The diameter is an important measurement in many applications, including the calculation of area and volume of a circle.

The diameter of the hole in a brass plate will expand with an increase in temperature. The equation to calculate the change in the diameter of the hole is given by:

D2 = D1 (1 + αT)
where D1 is the initial diameter of the hole, α is the coefficient of linear thermal expansion, and T is the change in temperature.
Substituting the given values,

D2 = 1.200 cm (1 + 19 × 10-6 K-1 × 200)

D2 = 1.210 cm
Hence, the diameter of the hole when the plate is heated to 220°C is 1.210 cm.

To learn more about diameter
https://brainly.com/question/19052774
#SPJ4

19) For the mercury in a thermometer to expand from 4.00 cm3 to 4.10 cm3, what change in temperature is necessary? The mercury has a volume expansion coefficient of 1.80 × 10-4 K-1.
A) 400 C°
B) 140 C°
C) 14 C°
D) 8.2 C°

Answers

The necessary change in temperature for the mercury to expand from 4.00 cm3 to 4.10 cm³, is 8.2 C°.

What is temperature?

Temperature is a physical property of matter which is usually measured with a thermometer and expressed in degrees of hotness or coldness on a specific scale. Temperature is a measure of the average kinetic energy of the particles in a substance and is related to the speed of those particles. As the temperature of a substance increases, the particles move faster, and vice versa. Temperature is an important factor in many chemical and physical processes, and living organisms need to maintain a certain temperature range in order to survive.

To calculate the necessary change in temperature for the mercury to expand from 4.00 cm3 to 4.10 cm³, use the formula ΔV = βVΔT, where β is the volume expansion coefficient and V is the initial volume. Rearranging the formula to solve for ΔT gives ΔT = ΔV / (βV). Plugging in the given values results in ΔT = 0.10 cm³ / (1.80 × 10-4 K-1 × 4.00 cm³) = 8.2 C°.

To learn more about temperature
https://brainly.com/question/27944554
#SPJ4

a permanent bar magnet with the north pole pointing downward is dropped through a solenoid, as shown in the illustration. a bar magnet oriented vertically, with its south pole on top and its north pole on the bottom. directly below the magnet, and also aligned vertically, is a solenoid consisting of wire wound around an open tube. when viewed from above, the wire spirals around and down the tube in a clockwise fashion. to the left of the solenoid, the wire leads are connected to an ammeter, closing the circuit. what is the direction of the induced current that would be measured in the ammeter as the magnet falls completely through the solenoid? down first down, then up first up, then down up if the magnet, still oriented with the north pole pointing downward, is pulled upward completely through the solenoid, what is the direction of the induced current measured in the ammeter? first up, then down first down, then up down up

Answers

The induced current measured in the ammeter as the magnet falls completely through the solenoid is first down, then up. If the magnet is pulled upward completely through the solenoid, the direction of the induced current measured in the ammeter is first up, then down.

When the north pole of the bar magnet is dropped through the solenoid, a magnetic field is created around the magnet which induces an electromotive force (EMF) in the wire of the solenoid. The direction of the induced EMF is such that it opposes the change in the magnetic field, according to Faraday's law of electromagnetic induction.
As the magnet falls through the solenoid, the magnetic field changes direction, causing the induced current in the wire to flow in a direction that opposes the change. This results in the current flowing first down and then up in the ammeter.
When the magnet is pulled upward through the solenoid, the magnetic field again changes direction, and the induced current in the wire flows in the opposite direction to the previous case. This results in the current flowing first up and then down in the ammeter.

Learn more about electromotive force here:

https://brainly.com/question/24182555

#SPJ11

What is the calculated value of the moment of inertia of a Disk+Ring placed on the rotary Motion Sensor, given the following measurements: Hanging mass (including hanger) - 59 s. radius of the three step pulley - 2 cm, and angular acceleration of the disk (when the hanging mass falls down 17 rad/s2. Multiply your answer by 1000, and write answer in kg m?

Answers

Moment of Inertia (I) = 0.00068 kg m² × 1000 = 0.68 kg m.

To calculate the moment of inertia of a Disk+Ring system placed on the rotary Motion Sensor, we will use the following formula:

Moment of Inertia (I) = Torque (τ) / Angular Acceleration (α)

Given the measurements:
Hanging mass (including hanger) = 59 g (convert to kg by dividing by 1000) = 0.059 kg
Radius of the three-step pulley = 2 cm (convert to m by dividing by 100) = 0.02 m
Angular acceleration (α) = 17 rad/s²

First, we need to calculate the torque (τ) using the hanging mass and radius of the pulley:
Torque (τ) = Force (F) × Radius (r)
Force (F) = Mass (m) × Gravity (g) = 0.059 kg × 9.81 m/s² = 0.57839 N
Torque (τ) = 0.57839 N × 0.02 m = 0.0115678 Nm

Now, we can calculate the moment of inertia (I):
Moment of Inertia (I) = Torque (τ) / Angular Acceleration (α) = 0.0115678 Nm / 17 rad/s² = 0.00068 kg m²

Since we need to multiply the answer by 1000, the final result is:
Moment of Inertia (I) = 0.00068 kg m² × 1000 = 0.68 kg m.

To learn more about gravity, refer below:

https://brainly.com/question/31321801

#SPJ11

An excited hydrogen atom could, in principle, have a radius of 4.00mm.
What would its energy be?
What would be the value of n for a Bohr orbit of this size?

Answers

The energy of the excited hydrogen atom is -7.93  x  10⁻⁴ eV.

The value of n for a Bohr orbit of this size would be 131.

What is the value of n for a Bohr orbit of this size?

The radius of an excited hydrogen atom is related to its energy by the formula for the Bohr radius:

r = n²(h² / 4π²meke²) / ε0

where:

r is the radius of the orbitn is the principal quantum numberh is the Planck constantme is the mass of the electronke is the Coulomb constantε0 is the permittivity of free space.

The energy of the excited hydrogen atom is calculated as

4 = n² (h² / 4π²meke²) / ε0

Solving for n:

n = √((4 x ε0 x 4π²meke²) / h²)

n = √((4 x 8.85 x 10⁻¹² x 4π² x 9.11 x 10⁻³¹ x 9 x 10⁹) / (6.63 x 10⁻³⁴)²)

n = 131

The energy of the excited hydrogen atom;

En = -(13.6 eV) / n²

En = -(13.6 eV) / (131²)

En =  -7.93  x  10⁻⁴ eV

Learn more about energy here: https://brainly.com/question/25959744

#SPJ1

calculate the length of a simple penduluim that has the same period as a meter stick with the axis at one end

Answers

The length of a simple pendulum that has the same period as a meter stick with the axis at one end is approximately 9.81 meters.

The period of a simple pendulum can be calculated using the equation T = 2π √(l/g), where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity.

The period of a meter stick rotating around one end can be found by considering it as a physical pendulum.

The equation for the period of a physical pendulum is T = 2π √(I/mgd), where I is the moment of inertia of the meter stick, m is its mass, d is the distance from the axis of rotation to the center of mass, and g is the acceleration due to gravity.

The moment of inertia of a meter stick about an end is 1/3 ml², where l is the length of the meter stick. Equating the two equations for T and solving for l gives approximately 9.81 meters.

To know more about gravity, refer here:

https://brainly.com/question/14874038#

#SPJ11

if we calculate an r of .60, the proportion of the variation of y that is explained by x is select one: a. .36 b. .40 c. .60 d. .64

Answers

The proportion of the variation of y that is explained by x is calculated by squaring the correlation coefficient (r). In this case, the correlation coefficient (r) is .60, so the proportion of the variation of y that is explained by x is .60 squared, which is equal to .64.

What is correlation coefficient?

Correlation coefficient is a numerical measure of the degree of linear association between two variables. It is a measure of how closely related two variables are. It ranges from -1 to +1, with -1 indicating a perfect negative correlation and +1 indicating a perfect positive correlation. A correlation coefficient of 0 indicates that there is no linear association between the two variables. Correlation coefficients can be used to measure the strength of relationships between variables and to assess the reliability of data. They can also be used to make predictions about the future values of one variable based on past values of another variable.


To learn more about correlation coefficient
https://brainly.com/question/28148749
#SPJ4

how a power supply works the equation governing the voltage drop across the capacitor in an circuit is where is the externally impose

Answers

The equation governing the voltage drop across a capacitor in an RC (resistor-capacitor) circuit is [tex]V(t) = V0 * (1 - e^{(-t/RC)})[/tex], where V(t) is the voltage across the capacitor at time t, V0 is the initial voltage, R is the resistance, C is the capacitance, and e is the base of the natural logarithm.

In an RC circuit, when an external voltage is applied, the capacitor starts charging or discharging based on the difference between the externally imposed voltage and the voltage across the capacitor.

The equation mentioned above is derived from Kirchhoff's loop rule and describes the time-dependent behavior of the voltage across the capacitor.
The voltage drop across a capacitor in an RC circuit is governed by the equation [tex]V(t) = V0 * (1 - e^{(-t/RC)})[/tex], which takes into account the initial voltage, resistance, capacitance, and time.

The externally imposed voltage is accounted for in the initial voltage, V0, in this equation.

For more information on voltage kindly visit to

https://brainly.com/question/29570280

#SPJ11

An automobile traveling at 10 km/hr, accelerated to 82 km/hr in 9.0 seconds. What is its acceleration?8km/hr/s9km/hr/s10km/hr/s82km/hr/s

Answers

the acceleration of the car is 2.22 m/s^2. Answer: None of the provided options is correct.

The following formula must be used to determine acceleration:

(Final velocity - Initial velocity) / Time = acceleration

In this case, the time taken is 9.0 seconds, the beginning velocity is 10 km/hr, and the ultimate velocity is 82 km/hr.

First, multiplying the velocities by 1000/3600 will change them from kilometres per hour to metres per second. So:

starting velocity equals 10 km/h times 1000 m/km divided by 3600 s/hr equals 2.78 m/s.

ultimate velocity is equal to 22.78 m/s at 82 km/h, 1000 m/km, and 3600 s/hr.

The following values can now be entered into the formula:

acceleration is equal to 2.22 m/s2 (22.78 m/s - 2.78 m/s) / 9.0 s.

learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ11

what is true about induced drag? a) price you pay for generation of lift b) proportional to cl^2 c) inversely proportional to ar d) all of the above

Answers

Induced drag is a type of drag that occurs as a result of the generation of lift. It is true that induced drag is the price you pay for generating lift. In addition, induced drag is proportional to the square of the lift coefficient (CL^2) and inversely proportional to the aspect ratio (AR) of the wing. Therefore, the correct answer is d) all of the above.

Induced drag is the drag resulting from lift generation, proportional to CL^2, and inversely proportional to AR. Thus, all statements (a, b, and c) are true.

Induced drag is a necessary consequence of lift generation, and it depends on the lift coefficient and aspect ratio of the wing. Understanding these relationships is crucial for designing efficient aircraft wings.

To know more about induced drag visit

https://brainly.com/question/31671199

#SPJ11

22) A runner generates 1260 W of thermal energy. If this heat has to be removed only by evaporation, how much water does this runner lose in 15 minutes of running? The latent heat of vaporization of water is 22.6 × 105 J/kg.
A) 50 g
B) 500 g
C) 35 g
D) 350 g
E) 40 g

Answers

The runner will lose 350 g of water in 15 minutes of running.When the runner generates thermal energy of 1260 W, this energy is used to increase the runner's body temperature as well as to evaporate water from the skin.

Assuming that all the generated heat is removed by evaporation, we can calculate the mass of water lost by the runner using the formula m = Q / (L × Δt), where Q is the thermal energy generated, L is the latent heat of vaporization of water, and Δt is the time interval. Plugging in the given values, we get m = 1260 / (22.6 × 10^5 × (15 × 60)) = 0.00035 kg = 350 g. Therefore, the runner loses 350 g of water in 15 minutes of running. The correct option is (D).

To learn more about thermal energy:

ttps://brainly.com/question/30859008

#SPJ11

The main evidence for the presence of invisible matter in our galaxy is.

Answers

The main evidence for the presence of invisible matter in our galaxy is gravitational lensing and the motion of stars within galaxies.


Gravitational lensing is the bending of light by the gravitational pull of massive objects, which can reveal the presence of invisible matter. Astronomers have observed gravitational lensing effects in our galaxy and other galaxies, indicating the existence of dark matter. The motion of stars within galaxies also provides evidence for the presence of invisible matter.

The speed at which stars move within galaxies suggests that there is more mass present than can be accounted for by visible matter alone. This additional mass is believed to be dark matter, which does not emit, absorb, or reflect light, making it invisible to telescopes. Further research and observations are needed to better understand the nature of dark matter and its role in the universe.

Learn more about gravitational lensing here:

https://brainly.com/question/30067995

#SPJ11

Two identical waves undergo pure constructive interference. The resultant intensity will be __________ that of the individual waves?.

Answers

When two identical waves undergo pure constructive interference, the displacement of one wave adds to the displacement of the other wave, resulting in a wave with twice the amplitude.

Since intensity is proportional to the square of the amplitude, the resultant intensity will be four times that of each individual wave.

Mathematically, if the individual waves have intensity I, the resultant wave will have an intensity of:

I_resultant = 2I + 2(I cos θ)

(where θ is the phase difference between the waves)

Since the waves undergo pure constructive interference, the phase difference θ is zero, so:

I_resultant = 2I + 2(I cos 0)

                  = 4I

Therefore, the resultant intensity will be four times that of each individual wave.

To know more about constructive interference refer here

brainly.com/question/16098226#

#SPJ11

If a person could travel at the speed of light, it would still take 4.3 years to reach the nearest
star, Proxima Centauri. How far away, in meters, is Proxima Centauri?

Answers

Answer:

4 × 10^16 m

Explanation:

[tex]c=\frac{d}{t}[/tex]

d = c × t

[tex]d = 3 * 10^{8} *4.3 * 365.25 * 24 * 60 60 = 4 * 10^{16} meters[/tex]

Answer:

proxima centauri Is 40208000000000km or ( about 268.770AU.) away from our planet

A student set up an experiment where pieces of elodea plant were placed in different test tubes and sodium bicarbonate solution was added. One of the tubes was wrapped in aluminum foil before both tubes were placed in front of a bright white light. Volumeters were placed on top and the volume was read every 10 minutes for 30 minutes. The results can be seen in the table below. Which of the tubes was exposed to light and how can you tell?.

Answers

the fact that tube B produced some gas suggests that there was some residual oxygen left in the plant tissues that was released through respiration, even in the absence of light.

it can be inferred that the tube labeled "A" was exposed to light, while the tube labeled "B" was wrapped in aluminum foil and kept in the dark.

Time (min) Tube A (mL) Tube B (mL)

0 0 0

10 0.5 0.1

20 1.2 0.2

30 1.8 0.3

This conclusion can be drawn by comparing the volume of gas produced by the two tubes over time. The elodea plant produces oxygen gas through photosynthesis when exposed to light, and the gas is collected in the volumeter. As seen in the table, the volume of gas produced in tube A increases significantly over time, while tube B shows only a slight increase in gas volume. This indicates that the elodea in tube A was exposed to light and was able to carry out photosynthesis, while the elodea in tube B was in the dark and did not produce much oxygen.

To learn more about light visit:

brainly.com/question/15200315

#SPJ11

if the masses of earth and the moon were both doubled, by how much would the radius of the moon's orbit about earth have to change if its speed did not change?

Answers

According to Kepler's third law, the radius of an orbit is proportional to the cube root of the mass of the central body. Therefore, if the masses of the Earth and the Moon were both doubled, the radius of the Moon's orbit about Earth would have to increase by a factor of 2^(2/3), which is approximately 1.59, in order for its speed to remain unchanged.
Hi! To answer your question, let's consider the following terms: gravitational force (F), centripetal force (Fc), mass of Earth (Me), mass of the Moon (Mm), and radius of the Moon's orbit (r).

When the masses of Earth and the Moon are doubled, the new gravitational force between them would be four times stronger (since F ∝ Me * Mm). However, since the Moon's orbital speed remains unchanged, the centripetal force (Fc) acting on the Moon will still be the same as before.

To maintain this balance between the increased gravitational force and the unchanged centripetal force, we need to adjust the radius of the Moon's orbit. Since F = Fc, and F is now four times greater, we need to increase the radius of the Moon's orbit to make the two forces equal again.

Using the equation for gravitational force (F = G * Me * Mm / r²) and centripetal force (Fc = Mm * v² / r), where v is the Moon's orbital speed, and G is the gravitational constant, we find that r² ∝ 1/F. Since F is four times greater, we need to increase r² by a factor of 4. Taking the square root, we find that the radius (r) must be increased by a factor of 2 to maintain the balance between the forces.

So, if the masses of Earth and the Moon were both doubled and the Moon's orbital speed did not change, the radius of the Moon's orbit would have to be doubled to maintain the balance between gravitational and centripetal forces.

To know more about  Kepler's law visit:

https://brainly.com/question/1608361

#SPJ11

A 1-kg ball is hung at the end of a rod 1-m long. If the system balances at a point on the rod 0. 25 m from the end holding the mass, what is the mass of the rod?.

Answers

The mass of the rod must be equal to the mass of the ball, which is 1 kg.

What is mass ?

Mass is a measure of the amount of matter or substance that an object contains. It is a fundamental physical quantity that is used to measure the amount of matter in a given object or system. It is measured in kilograms (kg) or grams (g).

The equation of equilibrium of the system is:
[tex]F_{rod} = F_{ball[/tex]
where [tex]F_{rod[/tex] is the force exerted by the rod and [tex]F_{ball[/tex] is the force exerted by the ball.
The force exerted by the ball is equal to its mass times gravity, so [tex]F_{ball[/tex]= mg, where m is the mass of the ball and g is the acceleration due to gravity.
The force exerted by the rod is equal to its mass times its acceleration. Since the rod is in equilibrium, its acceleration is zero, so [tex]F_{rod[/tex] = 0.
Therefore, we can write the equation of equilibrium as:
0 = mg
Since g is a constant, we can divide both sides by g to get:
0 = m
Since m is the mass of the ball, this equation tells us that the mass of the ball is zero. Therefore, the mass of the rod must be equal to the mass of the ball, which is 1 kg.

To learn more about mass

https://brainly.com/question/86444

#SPJ4

4. An electric heater is operated by applying a potential difference of 50.0 V across a wire of total resistance 8.00 Ω. Find the current in the wire and the power rating of the heater.

Answers

Using Ohm's Law, we can find the current in the wire:
I = V/R = 50.0 V / 8.00 Ω = 6.25 A, So the current in the wire is 6.25 A.

To find the power rating of the heater, we can use the formula:
P = VI, where P is the power, V is the potential difference, and I is the current. Plugging in the values, we get:
P = 50.0 V x 6.25 A = 312.5 W
So the power rating of the heater is 312.5 W.Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. This relationship is often represented mathematically as I = V/R, where I is the current through the conductor, V is the voltage applied across the conductor, and R is the resistance of the conductor. In simpler terms, Ohm's law describes the behavior of a resistor or conductor in an electrical circuit, where the current flowing through the circuit is directly proportional to the voltage applied across it, and inversely proportional to its resistance. Ohm's law is an important concept in electrical engineering and is used to design and analyze electrical circuits, as well as to calculate the power dissipation and efficiency of electrical component

To learn more about Ohm's Law, click here:
https://brainly.com/question/1247379

#SPJ11

A string attached to an airborne kite is maintained at an angle of 40° with the horizontal. If a total of 120 m of string is reeled in while bringing the kite back to the ground, what is the horizontal displacement of the kite in the process? (Assume the kite string doesn't sag.)

Answers

According to the question the horizontal displacement of the kite is 171.18 m.

What is horizontal displacement?

Horizontal displacement is a vector quantity that measures the distance between two points on a given plane. It is the shortest distance between the two points, measured along a horizontal line. Horizontal displacement is also known as lateral displacement, or simply displacement. It is often represented with the symbol x, and is calculated by subtracting the initial point from the final point.

tan(40°) = Opposite side / Adjacent side
We know that the opposite side is 120 m (the total amount of string reeled in) and the adjacent side is equal to the horizontal displacement. Solving for the horizontal displacement yields:
Horizontal displacement = 120 m / tan(40°) = 171.18 m
Therefore, the horizontal displacement of the kite is 171.18 m.

To learn more about horizontal displacement
https://brainly.com/question/25825784
#SPJ4

How long does vacuum therapy buttocks enhancement last?.

Answers

Vacuum therapy buttocks enhancement results can last anywhere from several weeks to several months. The duration of the results depends on various factors such as age, lifestyle, diet, and exercise habits. It is recommended to maintain a healthy lifestyle and exercise routine to prolong the effects of the treatment.

Additionally, touch-up sessions may be required every few months to maintain optimal results.

The duration of vacuum therapy buttocks enhancement results can vary depending on factors such as the individual's skin elasticity and the number of sessions undergone. Typically, vacuum therapy buttocks enhancement can last anywhere from 6 months to 2 years, with some individuals seeing long-lasting effects. It is important to note that maintenance sessions may be required to maintain the desired results.

To know more about Therapy  visit:

https://brainly.com/question/12368886

#SPJ11

A concave refracting surface is one with a center of curvature:
A.to the left of the surface
B.to the right of the surface
C.on the side of the incident light
D.on the side of the refracted light
E.on the side with the higher index of refraction

Answers

A concave refracting surface is one with a center of curvature on the side of the incident light

What is a spherical surface that is concave?

Having a reflecting surface, a spherical mirror is a component of a sphere. The term "concave mirror" refers to a mirror whose inner surface is the reflective surface, whereas the term "convex mirror" refers to a mirror whose outer surface is the reflective surface.

Anywhere an object (located outside the medium) is, a concave refractive surface of that medium will produce a true image of that object. A rectilinear light beam that strikes a surface and is referred to as an incident ray there is called an incident ray on that place. Angle of incidence is the angular relationship between this beam and the normal or perpendicular to the surface.

To learn more about spherical mirror use:

https://brainly.com/question/25937699

#SPJ4

While in the first excited state, a hydrogen atom is illuminated by various wavelengths of light. What happens to the hydrogen atom when illuminated by each wavelength?.

Answers

When illuminated by various wavelengths, hydrogen atoms absorb specific wavelengths corresponding to energy level transitions, while others pass through without any interaction.

In the first excited state, the hydrogen atom has electrons in higher energy levels. When illuminated by different wavelengths of light, the atom absorbs only those wavelengths that match the energy difference between its current excited state and another allowed energy level. This process is called absorption and results in the electron transitioning to a higher energy level.

If the wavelength of light doesn't match any energy level transition, the light passes through the atom without any interaction. When the excited electron eventually returns to a lower energy level, it releases energy in the form of light, called emission. The wavelengths absorbed and emitted by hydrogen atoms form the characteristic hydrogen spectrum.

Learn more about transitions here:

https://brainly.com/question/18156550

#SPJ11

"A circular copper loop is placed perpendicular to a uniform magnetic field of 0.75 T. Due to external forces, the area of the loop decreases at a rate of 7.26 ◊ 10ñ3 m2/s. Determine the induced emf in the loop.
A) 3.1 x 10^-4 V
B) 6.3 x 10^-4 V
C) 1.2 x 10^-3 V
D) 5.4 x 10^-3 V
E) 3.1 V"

Answers

The induced emf in the loop is 5.4 x 10^-3 V. The induced emf in the loop can be determined using Faraday's law of electromagnetic induction, which states that the induced emf is equal to the rate of change of magnetic flux through the loop.

The induced emf in the loop can be determined using Faraday's law of electromagnetic induction, which states that the induced emf is equal to the rate of change of magnetic flux through the loop. In this case, the loop is a circle with a decreasing area, so its magnetic flux through the magnetic field will be changing. The magnetic flux through the loop can be calculated using the formula Φ = BAcosθ, where B is the magnetic field strength, A is the area of the loop, and θ is the angle between the magnetic field and the normal to the loop. In this problem, the loop is perpendicular to the magnetic field, so θ = 90° and cosθ = 0. Therefore, Φ = BA. Taking the derivative of this equation with respect to time gives dΦ/dt = B(dA/dt), which is equal to the induced emf E. Substituting the given values gives:

E = B(dA/dt) = (0.75 T)(7.26 × 10^(-3) m^2/s) = 5.445 × 10^(-3) V

Therefore, the induced emf in the loop is 5.4 x 10^-3 V, which is closest to option (D).

To learn more about Faraday's law click here

https://brainly.com/question/1640558

#SPJ11

Other Questions
Which equation reveals the minimum value of the function f(x)=x26x+1 ? How many milliliters of 0.0850 M NaOH are required to titrate each of the following solutions to the equivalence point:40.0mL of 0.0900 M HNO3 in humans, xp is a disorder of the nucleotide excision repair mechanism. these individuals are unable to repair dna damage caused by ultraviolet light. which of the following are the most prominent types of dna lesions in individuals suffering from xp? project risk management includes the art and science of identifying, analyzing, and responding to risk throughout the life of the project and in the best interests of meeting the project objectives. project risk management includes the following processes: T/F? on culture: how would your employer use training for spouses of expatriate employees to improve employee performance and the duration of service overseas? in which area of the periodic table would the elements with the highest density be found? group of answer choices g a gyroscope slows from an initial rate of 49.3 rad/s at a rate of 0.726 rad/s2. (a) how long does it take (in s) to come to rest? s (b) how many revolutions does it make before stopping? rev c. if this was a belo plan with a pay rate of $22.00 per hour and a maximum of 53 hours, how much would ortiz be paid for 48 hours? Describe the building of the simple filtration apparatus.... Create a diversion from a damaging issue in politics. Evaluate the relationship between fishes' body form and function in an aquatic environment. Que sealo Mariano Picon del costumbrismo en Venezuela this image is an artist's conception of the face-on view of the milky way. we can never look at our galaxy this way, but this image is based on information that we have gathered about the structure of the milky way. which galaxy type does the milky way appear to be? explain how you determined this. Bruce, a store owner, would like to determine if a new advertising initiative has increased the proportion of sales he makes to women is more than 75%. To test this, he gathers information on 150 random sales and finds that 120 of those sales were made to women. The following is the setup for this hypothesis test: H0:p=0.75 Ha:p>0.75 The p-value for this hypothesis test is 0.0001. At the 1% significance level, choose the correct conclusion?Select the correct answer below:There is sufficient evidence to conclude that the proportion of sales he makes to women is more than 75%.There is NOT sufficient evidence to conclude hat the proportion of sales he makes to women is more than 75%.There is sufficient evidence to conclude that the proportion of sales he makes to women is more than 50%.There is NOT sufficient evidence to conclude that the proportion of sales he makes to women is more than 50% 3. Theoretically, how many moles of a ketone can reduce one mole of sodium borohydride?. 1 c. 3 e. 5 b. 2 d. 4 a city council has voted to decrease planned investment in new parks in order to improve a damaged bridge in the city. this is an example of a decision motivated by: assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. calculate that overhead rate in most states, probation officers spend the majority of their time: a. providing employment assistance. b. providing therapy. c. transporting clients to appointments. d. supervising offenders. based on what you know about the shape of space and time, select all of the correct statements from the following list. How long will a SR-22a stay on a driver's insurance policy?