For each of the following compounds, decide whether the compound's solubility in aqueous solution changes with pH. If the solubility does change, pick the pH at which you'd expect the highest solubility. compound Does solubility change with highest solubility PH? pH = 9 Caco yes pH = 6 Опо Ba(OH)2 yes no PbCl2 yes Спо

Answers

Answer 1

The highest solubility at a pH less than 7.

What is aqueous solution?

An aqueous solution is one in which water serves as the solvent. Chemical equations typically illustrate it by adding (aq) to the appropriate chemical formula. For instance, Na+(aq) + Cl would be used to represent a solution of table salt, or sodium chloride (NaCl), in water (aq).

For Caco (Calcium carbonate), solubility does change with pH. Calcium carbonate is a basic salt and is more soluble in acidic solutions. Therefore, you would expect the highest solubility at a pH of around 9, where the carbonate ion (CO32-) is the least likely to be protonated.

For Ba(OH)2 (Barium hydroxide), solubility does not change with pH. Barium hydroxide is a strong base and is highly soluble in water regardless of the pH. Therefore, there is no specific pH at which you would expect the highest solubility.

For PbCl2 (Lead chloride), solubility does change with pH. Lead chloride is a salt and is more soluble in acidic solutions than in neutral or basic solutions. Therefore, you would expect the highest solubility at a pH less than 7.

To know more about aqueous solution, visit:

brainly.com/question/14097392

#SPJ4


Related Questions

For cis-1,3-dimethylcyclohexane, which structures represent the possible boat conformations?- a- b- c- d

Answers

The structures in option A and D correctly represents structure of cis-1,3-dimethyl cyclohexane.

How does cyclohexane confirmation take place?

There are three stable conformations of cyclohexane. Chair, boat, and twist boat are them. The chair conformation is the most stable of the three. Each carbon atom in the cyclohexane's boat shape has two different sorts of groups. Both axial and equatorial groups describe them. From the provided boat conformations, we should determine the cis conformations.

Two substituents are in up, up (or) down, down to each other in boat conformation if they are cis to one another. Two substituents are in up, down, or down, up to each other in boat conformation if they are trans to one another.

In boat conformation A, both methyl groups are in up direction.

In boat conformation-B and C, one methyl group is in up direction and other one is in down direction.

In boat conformation D, both methyl groups are in down direction.

To know more about conformations, visit:

brainly.com/question/14169188

#SPJ4

The complete question is as follows :

For cis-1,3-dimethylcyclohexane, which structures represent the possible boat conformations?- a- b- c- d:

ozonolysis of molecule a would result in the formation of what two functional groups? a ketone and an aldehyde two carboxylic acids two aldeydes two ketones

Answers

Which two functional groups would be created by the ozonolysis of molecule a Me2C = CHMe produces aldehydes and ketones during ozonolysis, providing all the other alternatives no aldehydes.

What does ozonolysis entail as a reaction?

To cleave those unsaturated bonds in alkenes, alkynes, etc azo compounds, ozone is used in the organic chemical process known as ozonolysis.

Ozonelysis example: What is it?

Pentane will occur from the reaction, for instance, between bromoethane and I-bromopropane. When each of the participants in the reaction reacts on their own, butane will also be produced. For instance, 1-bromopropane produces hexane, while bromoethane produces butane.

To know more about ozonolysis visit:

https://brainly.com/question/13580842

#SPJ4

For which one of the following reactions will delta H be approximately (or exactly) equal to delta E?H2(g) + Br2(g) ---> 2HBr(g)H2O(l) ---> H2O(g)CaCO3(s) ---> CaO(s) + CO2(g)2H(g) + O(g) ---> H2O(l)CH4(g) + 2O2(g) ---> CO2(g) + 2H2O(l)

Answers

The reaction for which delta H will be approximately (or exactly) equal to delta E is CH4(g) + 2O2(g) ---> CO2(g) + 2H2O(l).

What is reaction?

Reaction is the process of responding to a stimulus or event. It can refer to a physical response, such as a reflex, or an emotional response, such as a feeling. Reactions can be conscious or unconscious, automatic or deliberate, and can occur in any living organism. In psychology, reactions are studied to understand how they shape behavior and to identify underlying mental processes. Reaction time, or the time it takes to respond to a stimulus, can also be measured and studied.

This is because this reaction is an exothermic reaction, which means that the energy released by the reaction is equal to the enthalpy change of the reaction.

To learn more about reaction
https://brainly.com/question/27300160
#SPJ4

Indicate the molecular geometry around the central atom of each of the following species:
CF4 ___
NCIy ___
SOz ___
the silicon atom in disilane (Si is bonded to Si) SizH6 ___
the carbon atom inurea (NHzJzCO (C is bonded to 0,Nand N) ___

Answers

The molecular geometry around the central atom of each of the following species: For CF₄ is tetrahedral, for NCl₃ is trigonal pyramid, for SO₂ is bent,  Si₂H₆ is tetrahedral, and for  (NH₂)₂CO is trigonal planar.

The definition of molecular geometry

The three-dimensional arrangement of atoms in a molecule is known as molecular geometry, also referred to as the molecular structure. Understanding a compound's molecular structure can be useful in identifying its polarity, reactivity, phase of matter, color, magnetism, and biological activity.

A molecule's three-dimensional shape in space is known as its molecular geometry. The surrounding atoms and electron pairs as well as the central atom influence it. Using the Valence Shell Electron Pair Repulsion (VSEPR) method, the shape of the majority of molecules can be predicted.

To know more about molecular geometry visit:

https://brainly.com/question/7558603

#SPJ4

how do i solve this with showing all work

Answers

0.750 tsp of baking soda in grams would be  4.49 grams.

Dimensional analysis

From the available information:

1 tsp of baking soda = 0.211 oz1 oz = 28.35 grams

If, 1 tsp of baking soda = 0.211 oz, then 0.750 tsp of baking soda would be:

 0.750 x 0.211 = 0.15825 oz

Thus, 0.750 tsp of baking soda is equivalent to 0.15825 oz of baking soda.

If 1 oz = 28.35 grams, then 0.15825 oz of baking soda will be:

28.35 x 0.15825 = 4.49 grams

In other words, 0.750 tsp of baking soda would be worth 4.49 grams of baking soda going by the available conversion factors.

More on dimensional analysis can be found here: https://brainly.com/question/13078117

#SPJ1

.Water and toluene are not miscible. Which of the following is most likely the formula of toluene?CH3COOHC6H12O6CH3OHC6H5CH3

Answers

Water and toluene are not miscible, the formula of toluene is  (d) C₆H₅CH₃.

What is toluene?

Toluene, a substituted aromatic hydrocarbon, is also known as toluol. It is an insoluble in water odorless liquid with the characteristic odor of paint thinners.

It is a phenyl group connected to a methyl group and is a mono-substituted benzene derivative (CH3). Benzene is the parent of the chemical. The IUPAC has referred to it as "methylbenzene" as a result. Toluene is largely used in the industrial sector as a feedstock and a solvent.

Because of their polarity and functional group pressure, the other options are soluble, making option D the correct response.

To know more about Toluene, refer

https://brainly.com/question/8696404

#SPJ4

Try Again Your answer is incorrect. • Compound COCO3. Your answer is incorrect. • Compound NiSO4: Your answer is correct. It is traditional to write the number part of the charge first in an ion symbol. • Compound CrS: Your answer is correct. It is traditional to write the number part of the charge first in an ion symbol. • Compound VBrz: Your answer is correct. It is traditional to write the number part of the charge first in an ion symbol. Complete the table below by writing the symbols for the cation and anion that make up each ionic compound. The first row has been completed for you. ionic compound cation anion Naci Na Cl-CoCO3 CO+2 CO2-3NiSO4 Ni+2 SO2-4Crs2 Cr-4 S2-V Br3 V+3 Br-

Answers

NiSO4: The answer you gave is accurate. In an ion symbol, the number component of the charge is often written first. • CrS compound.

CoCO3: Is it a salt?

It is a salt made up of the weak acid H2CO3 and the strong base Ca(OH). Chalk, or CaCO3, does not function like a base since it does not dissolve in water. Use the app to access an endless number of solutions.

Is coco3 soluble in water?

Spherocobaltite, sometimes referred to as cobalt carbonate, is a mineral with the chemical formula CoCO3. It is cobalt's carbonate salt. When melted, it produces red trigonal flakes with a specific gravity of 4.13 that disintegrate. Cold or warm water does not dissolve cobalt carbonate, but acids can.

To know more about carbonate visit:

https://brainly.com/question/21809057

#SPJ4

what is the net ionic equation for the precipitation reaction between silver nitrate solution and sodium sulfide solution

Answers

2Ag[+](aq) + S[2-] -> Ag{2}S(s) is the net ionic equation for the precipitation reaction between silver nitrate solution and sodium sulfide solution.

What is ionic equation?

An ionic equation is a chemical equation in which the electrolytes in aqueous solution are expressed as dissociated ions. It is similar to a molecular equation in which compounds are expressed as molecules. Chemical equations known as ionic equations only display the ions involved in a chemical reaction. Or, the ions that combine in a solution to react and create new substances. Those ions that don't take part are referred to as spectator ions. A chemical equation known as an ionic equation expresses the electrolytes in aqueous solution as dissociated ions. The ionic species are usually followed by (aq) in the equation to denote that they are in an aqueous solution, and this is typically a salt that has been dissolved in water.

Here,

The precipitation reaction between silver nitrate solution and sodium sulfide solution is represented by the net ionic equation 2Ag[+](aq) + S[2-] -> Ag{2}S(s).

To know more about ionic equation,

https://brainly.com/question/29299745

#SPJ4

Calculate the energy required to heat 712.0 g of graphite from 2.0 °C to 20.7 °C. Assume the specific heat capacity of graphite under these conditions is 0.710 J-g-K Round your answer to 3 significant digits.

Answers

To calculate the energy required to heat a substance, we can use the formula:

Q = mcΔT

where Q is the heat energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Given that we have 712.0 g of graphite, a specific heat capacity of 0.710 J/g-K, and a temperature change of 18.7 °C (20.7 °C - 2.0 °C)

Q = (712.0 g) x (0.710 J/g-K) x (18.7 °C)

Q = 10,965.64 J.

The energy required to heat 712.0 g of graphite from 2.0 °C to 20.7 °C is 10.965 kJ.

Learn more about Specific Heat Capacity here: https://brainly.com/question/29766819

#SPJ4

What volume of 0.0887 M MgF2 solution is needed to make 275 mL of 0.0224 M MgF2 solution by dilution? a. 69.4 mL b. 72.3 mL c. 14.4 mL d. 91.8 mL

Answers

By dilution, 275 mL or 0.0224 MgF2 solution can be created from 69.4 mL of 0.0887 MgF2 solution.

What exactly does "dilution" mean?

By adding extra more solvent, such as water, to the solution, dilution is indeed the process of "reducing the concentration of the solute in a solution." A solution is diluted by adding additional solvent without also adding more solute.

What various dilutions are there?

An approach used frequently to achieve this concentration reduction is serial dilution. diluted homeopathy. An equation called "dilution" can be used to determine how quickly a gas diluted. A sort of unauthorized trademark usage outside the relevant market is trademark dilution.

To know more about dilution visit:

https://brainly.com/question/28997625

#SPJ4

if the volume of the reaction vessel in the previous part was 1.50 ll , what amount of br2br2 (in moles) was formed during the first 15.0 ss of the reaction?

Answers

The 15s of the reaction saw 0.0153 moles of Br2 being produced.

Relational Equation

H2 + Br2 > 2HBr

According to the reaction's equation, [HBr] = [H2] + [Br2] = -1/2 [HBr]/[t]

The amount of HBr decreased from 0.520M to 0.486M in the initial 25 seconds of the reaction.

Average Rate of Reaction Rate =-1/2 ([HBr]f- [HBr]t/i

Rate = -1/2 (0.486-0.52/2)

Rate: 0.00068 M/s

0.00068M/s is the reaction's average rate.

Rate of the response is

Rate= [Br2]/t 0.00068= [Br2]/15 Br2= 0.00068 15= 0.0102M

In the reaction, Br2 is present in 0.0102M concentration.

Number of Moles The amount of Br2 produced in the first 15 seconds can be determined using the formula: Number of moles=molarity×volume, where n = 0.0102 and 15 = 0.0153 mol.

0.0153 moles of Br2 were created in the reaction, according to the calculations above.

For more information on rate of reaction kindly visit to

https://brainly.com/question/2985000

#SPJ4

if you are working with a chemical and need to find out about the routes of exposure, as well as the short and long term effects of exposure, where on the sds would you look?

Answers

If you need to learn more about the exposure pathways, as well as the immediate and long-term impacts of exposure, when dealing with a chemical, Toxicological Information Section 11

What are the consequences of toxicity?

Additionally possible symptoms include mortality, cyanosis, a headache, weakness, dizziness, shortness of breath, and cyanosis. Ingestion can irritate the digestive system and trigger nausea and vomiting. According to reports, DAAB can cause methemoglobinemia after being inhaled, ingested, or absorbed via the skin.

Toxicology: What is it?

A branch of research known as toxicology aids in our understanding of the potentially hazardous consequences that certain materials, settings, and events may have on humans, animals, and the environment.

To know more about Toxicological visit:

https://brainly.com/question/14468004

#SPJ4

Write equations showing how each of the following weak bases ionizes water to form OH?.

CO2?3

Express your answer as a chemical equation. Identify all of the phases in your answer.

C6H5NH2

Express your answer as a chemical equation. Identify all of the phases in your answer.

C2H5NH2

Express your answer as a chemical equation. Identify all of the phases in your answer.

Answers

The following species produce OH- in water using the following reaction equation:

CO3^2-(aq) + H2O(l) -------> HCO2^-(aq) + OH^-(aq)

C6H5NH2(aq) +  H2O(l) -------> C6H5NH3^+(aq) + OH^-(aq)

C2H5NH2(aq) +  H2O(l) -------> C2H5NH3^+(aq) +  OH^-(aq)

What is weak base?

Bases produce OH- when they react with water. A weak base is a substance that ionizes only to a small extent in water. A weak base remains largely undissociated in water. Recall that bases produce OH- in solution.

Here,

The equation of the reaction by which the following species produce OH- in water are shown below;

CO3^2-(aq) + H2O(l) -------> HCO2^-(aq) + OH^-(aq)

C6H5NH2(aq) +  H2O(l) -------> C6H5NH3^+(aq) + OH^-(aq)

C2H5NH2(aq) +  H2O(l) -------> C2H5NH3^+(aq) +  OH^-(aq)

To know more about weak bases,

https://brainly.com/question/12420454

#SPJ4

the remaining mass of 28 grams of a radioactive element whose half life is 20 years is given by the following equation, after t years. how much of the initial mass remains after 100 years?

Answers

The remaining mass of 28 grams of a radioactive element whose half life is 20 year. The initial mass remains after 100 years is 0.875 grams

The radioactive substance weighs 28 grams at first. The radioactive element has a half-life of 20 years. After t years, the mass y(in grams) that is left is calculated using the equation below

y=28(1/2)^t/20 ,t ≥ 0

Consequently, the quantity of initial mass that is still present after 100 years would be

y=28(1/2)^t/20 ,t ≥ 0

y=28(1/2)^100/20

y=28(1/2)⁵

y = 0.875 grams of the initial mass remain

Therefore, after 100 years, there will still be 22.0.875 grams of the starting mass.

Your question is incomplete but most probably your full question attached below

Learn more about radioactive element at https://brainly.com/question/23759636

#SPJ4

When calcium carbonate is heated, it breaks down into calcium oxide and carbon dioxide. caco3(s) →cao(s) co2(g) you heat 2.0 moles caco3. how many moles of carbon dioxide(co2) will you make?

Answers

Moles of carbon dioxide(co2) will you make only 0.0115 mol was produced.

we know the ideal gas equation,

PV = nRT

PV/RT=n

n=(1.04 atm)(1.00 L) /L atm (0.0821 )(1100 K) mol K

n=0.0115 moles of CO2.

The moles ofCaCO3 = 50.0 g/100.09 g/mol = 0.500 mol CaCO3 .If the reaction had gone to completion, 0.500 mol of CO2 would have been produced.  The two different experiments (one with 50.0 g of CaCO3 and one with 100.0 g of CaCO3) reached the same constant, final pressure of 1.04 atm.

Since increasing the amount of reactant did not produce more product, there is no way that all of the CaCO3 reacted. Instead, an equilibrium condition has been achieved and there must be some solid CaCO3 in the container.

To know more about moles here

https://brainly.com/question/15356425

#SPJ4

In which of the following atoms is the 2s orbital closest to the nucleus?
a. At
b. Br
c. Cl
d. I
e. F

Answers

Chlorine has more valence electrons than P or Si, which causes its core 2s orbital to be closer to its nucleus.

What exactly are the valence electrons?

Valence electrons are the electrons located in an atom's outermost energy level or shell. For instance, the oxygen molecule has six valence electrons, two of which are located in the 2s subshell and four in the 2p subshell.

What are the valence electrons' physical characteristics?

For neutral atoms, the total number of valence electrons is the same as the total number of primary group electrons. Looking at an element's column in the periodic table will reveal its major group number. One member of group four, carbon, has four valence electrons.

To know more about valence electron visit:

https://brainly.com/question/28977387

#SPJ4

a chemistry student needs of tetrahydrofuran for an experiment. by consulting the crc handbook of chemistry and physics, the student discovers that the density of tetrahydrofuran is . calculate the volume of tetrahydrofuran the student should pour out. be sure your answer has the correct number of significant digits.

Answers

The density of tetrahydrofuran needed for a chemistry student to do the experiment is 0.888 g/mL

Is water less dense than tetrahydrofuran?

Tetrahydrofuran has an ethereal smell and is visible as a transparent, colourless liquid. not as dense as water. 6 °F flash point Air is lighter than vapours.

The finest solvent is tetrahydrofuran, why?

Because it can dissolve different resins even at room temperature and is miscible with water and the majority of organic solvents, THF is frequently employed as a solvent for specialised resins such photosensitive resins. Additionally, it serves as a solvent for Wittig and Grignard processes.

Tetrahydrofuran and water: do they mix?

Regardless of the sequence of introduction, if two compounds are totally soluble in one another, they are said to be miscible. Tetrahydrofuran (THF), for instance, and water mix well.

Learn more about tetrahydrofuran here:

brainly.com/question/28490343

#SPJ4

d. Calculate the concentration of C5H6 when 250 seconds have passed.
e. On the plot of [C5H6] ^ - 1 vs. time, draw a line that shows the results that would be expected if the same experiment was repeated at a lower temperature.

Answers

The concentration of C₅H₆ when 250 seconds have passed is 0.015 M. e. The slope of the plot will be less steep at a lower temperature.

What is concentration or molar mass?

The molar mass of many compounds can be calculated by dividing the mass of the compound by the number of moles of the compound.

d.

[C5H6]0⁻¹ = 25 M⁻¹

t = 250 s

k = 0.17 M⁻¹ s⁻¹

Now, substituting these values in the integrated rate law to get,

[C5H6]⁻¹ = 0.17 M⁻¹ s⁻¹ x 250 s + 25 M⁻¹

= 67 M⁻¹

or,

[C5H6] = 1/67 M⁻¹

= 0.015 M

e.

According to the Arrhenius equation, the rate constant of a reaction decreases with temperature.

Therefore, d. the concentration of C₅H₆ is 0.015 M.

e. At lower temperatures, the slope of the plot will be less steep.

To learn more about concentration, refer to the link:

https://brainly.com/question/13872928

#SPJ1

The question is incomplete. Your most probably complete question is given below:

The full question and the graph are added.

why must deuterated solvents (such as d2o and cdcl3) be used to prepare nmr samples? group of answer choices

Answers

Since deuterium has non-magnetic nuclei, which do not produce NMR signals, it is necessary to conduct NMR experiments using deteriorated solvents. If the solvent contains protons, the signal from the sample and the solvent will mix.

Why is using a deuterated solvent in NMR crucial?

A large solvent signal that would otherwise appear in the proton NMR spectrum has been suppressed by using expensive deuterated solvents, which also makes locking and shimming easier.

Deuterium, an element that isotopically uses hydrogen and uses magnetic resonance imaging (NMR) as a solvent in imaging, is present in deuterium chloroform (CDCL3). The primary application for this substance without chemical alteration is in NMR spectrometers.

To know more about NMR visit:

https://brainly.com/question/17516931

#SPJ4

why are uranium-238, uranium-235 and potassium-40 isotopes better than carbon-14 to find the age of artifacts from millions of years ago?

Answers

Uranium-238, Uranium-235, and Potassium-40 isotopes are better than Carbon-14 to find the age of artifacts from millions of years ago because they have longer half-lives.

The half-life of Carbon-14 is only about 5,730 years, making it useful for dating materials that are only up to around 60,000 years old. In contrast, the half-life of Uranium-238 is about 4.5 billion years, and the half-life of Uranium-235 is about 704 million years, making them useful for dating materials that are much older. Potassium-40 has a half-life of 1.25 billion years. This means that these isotopes are still present in much older samples, and can be used to accurately determine the age of materials from millions of years ago.

Learn more about isotopes here:

https://brainly.com/question/12955625

#SPJ4

Rank the following in order of increasing polarity: CH2Br2, CF2Cl2, CF2Br2, CBr4 A. CH2Br2 < CF2Br2 < CF2Cl2 < CBr4 B. CBr4 < CH2Br2 < CF2Cl2 < CF2Br2 C. CH2Br2 < CF2C12 < CF2Br2 < CBr4 D. CBr4 < CF2Br2 < CF2Cl2 < CH2Br2 E. CBr4 < CH2Br2 < CF2Br2 < CF2Cl2

Answers

CBr4 < CH2Br2 < CF2Br2 < CF2Cl2 Polar molecules contain polar bonds and can be ordered from most to least polar based on the polarity of their bonds.

What is polar bonds?

Polar bonds are chemical bonds between atoms in which the sharing of electrons is not equal. Polar bonds are caused by the difference in electronegativity between the two atoms involved in the bond. Electronegativity is the measure of an atom's ability to attract electrons to itself.

CBr4 has the most polar bond and is therefore the most polar molecule. CH2Br2 has the second most polar bond, followed by CF2Br2, and then CF2Cl2 with the least polar bond.

To learn more about polar bonds
https://brainly.com/question/2615067
#SPJ4

According to Einstein's equation, if 1 kg of mass "disappears" during a
reaction, then———-


A. the law of conservation of momentum is also violated.
OB. the law of conservation of charge is also violated.
C. the law of conservation of mass is violated.
OD. 3 x 108 J of energy is produced.

Answers

The answer is c

Because you can’t create/destroy energy it just doesn’t disappear. It changes from one form to another form of energy.

Which equation is the balanced chemical equation for the synthesis reaction for the formation of sulfur dioxide (SO₂)?
A.) 2S+0₂ → SO₂
B.) S+20₂4S02
C.) S+0₂2SO2
D.) S+O₂ → SO₂

Answers

The equation that is balanced for the synthesis reaction for the formation of sulfur dioxide (SO₂) is as follows: S + O₂ → SO₂ (option D).

What is synthesis reaction?

A chemical reaction is a process typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A synthesis or combination reaction is a specific type of chemical reaction that involve two or more chemical species combining to form a more complex product:

A + B → AB

According to this question, sulfur combines with oxygen in a synthesis reaction to form sulfur dioxide as follows: S + O₂ → SO₂.

Learn more about synthesis reaction at: https://brainly.com/question/16987748

#SPJ1

for many years drinking water has been cooled in hot climates by evaporating it from the surfaces of canvas bags or porous clay pots. how many grams of water can be cooled from 35 to 20 degree c by the evaporation of 60 g of water (the heat of vaporization of water in this temperature range is 2.4 kj/g. the specific hear of water is 4.18 j/g-k.)

Answers

The mass in the grams of water can be cooled from 35 to 20 degree c by the evaporation of 60 g of water is the 2296.6 g.

Given that :

ΔH =  heat of vaporization  = 2.4 kJ/g = 2400 J/g

Mass of the water = 60 g

q = ΔH m

q = 2400 × 60

q = 144000 J

The heat expression is given as :

q = mc ΔT

q = 144000 J

m = ?

c = 4.18 J/ g k

ΔT = 308 K - 293 K = 15 K

m = q / c ΔT

m = 144000 / 4.18 × 15

m = 2296.6 g

To learn more about heat of vaporization here

https://brainly.com/question/13922061

#SPJ4

Answer: 127.46 g

Explanation:

ΔH = heat of vaporization = 2.4 kJ/mol = 2400 J/mol

Mass of water = 60 g

Moles of water = 60 g/18 g/mol = 3.33 moles

q = ΔH × moles

q = 2.4 kJ/g × 3.33 mol

q = 2400 J × 3.33 mol

q = 7992 J

The heat expression is given as :

q = 7992 J

m = ?

c = 4.18 J/g × k

ΔT = 308 K - 293 K = 15 K

q = mcΔT

m = q/cΔT

m = 7992/4.18 × 15

m = 127.46 g

Match each element with the charge it will have when it becomes an ion. aluminum rubidium selenium nitrogen neon chlorine barium

Answers

According to electronic configuration, when elements become ion, aluminum, rubidium ,selenium, nitrogen, neon, chlorine, barium loose 3 electrons,1 electron, gain 2 electrons , gain 3 electrons,neon is stable, chlorine gains 1 electron and barium looses 2 electrons.

What is electronic configuration?

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Learn more about electronic configuration,here:

https://brainly.com/question/29757010

#SPJ1

A sample of silica gel (SiO₂) contains 7.52 x 10^22
molecules of SiO2. How many moles of SiO2
molecules does this sample contain?

Answers

The number of moles in 7.52 × 10²² molecules of silicon dioxide is 0.125 moles.

How to calculate number of molecules?

The number of moles in a substance can be calculated by dividing the number of molecules by Avogadro's number as follows:

no of moles = no of molecules ÷ 6.02 × 10²³

According to this question, a sample of silica gel (SiO₂) contains 7.52 x 10²² molecules of silica. The number of moles can be calculated as follows:

no of moles = 7.52 × 10²² ÷ 6.02 × 10²³

no of moles = 1.249 × 10-¹

no of moles = 0.125moles

Therefore, 0.125 moles are present in 7.52 × 10²² molecules of silica.

Learn more about no of moles at: https://brainly.com/question/14919968

#SPJ1

imagine you are working in a lab and a crystal of benzoic acid touches bare skin on your wrist. why would the advice cited above not be applicable in this situation and what would be a more appropriate response?

Answers

The advice cited above would not be applicable in this situation because benzoic acid is not a corrosive material.

What is material?

Material is any object or substance that is used to create something else. It is a physical substance that can be manipulated and transformed in some way to make it useful. Materials can be natural, such as wood, stone, and metal, or they can be synthetic, such as plastic, fabric, or rubber. Depending on the purpose, materials can range from strong and durable to soft and flexible. In the construction industry, materials are chosen for their strength, durability, and cost-effectiveness. In manufacturing, materials are chosen for their ability to be formed and shaped into the desired product. In the arts, materials are chosen for their aesthetic properties and potential to create something unique and visually stimulating.

A more appropriate response would be to thoroughly wash the affected area with soap and water and seek medical attention if irritation or pain persists.

To learn more about material
https://brainly.com/question/29783874
#SPJ4

If Ka is 1.85x10^-5 for acetic acid, calculate the pH at one half the equivalence point and at the equivalence point for a titration of 50mL of 0.100M acetic acid with 0.100M NaOH.

Answers

The pH at one half the equivalence point and at the equivalence point for a titration 8.716.

What does titration mean in terms of chemistry?

Titration is a method of chemical analysis where the quantity of a sample's constituents is determined by adding a precisely measured amount of a different substance to which the desired constituent will react in a specific, known proportion.

What is titration, and what does it do?

The equivalence point, or the point at which chemically equivalent amounts of the reactants have been combined, is to be detected by the titration. The stoichiometry of the reaction determines how many reactants have been combined at the equivalence point.

To know more about titration visit-

https://brainly.com/question/30046193

#SPJ4

Select the ΔH values associated with the dissolution of lithium chloride that are exothermic.
Check all that apply.
ΔH1: energy associated with the separation of water molecules
ΔH2: energy associated with the separation of LiCl ions
ΔH3: energy associated with the formation of water-ion interactions
ΔHsoln: the enthalpy of solution

Answers

The correct statement that are exothermic is energy associated with the formation of water-ion interaction.

An exothermic reaction is the one during which system releases energy and during an endothermic reaction system absorbs energy.

Option 1  is incorrect as water molecules do not undergo ionization when added to water and thus no energy is released.

Option 2 is incorrect because the separation LiCl into subsequent ions requires a significant amount of energy and thus it will be a endothermic reaction.

Option 3 is correct as the formation of water ion releases a large amount of energy and thus it is an endothermic reaction.

Option 4 is also correct as it is the energy associated with the whole system.

To learn more about ions click here:

https://brainly.com/question/13692734

#SPJ4

Calculate the molar mass of Fe 3(PO 4) 2. 237.64 g/mol 262.52 g/mol 245.79 g/mol 357.49 g/mol 525.04 g/mol

Answers

The molar mass of Fe3(PO4)2 can be calculated by adding the molar masses of each individual element in the compound.

Fe3(PO4)2 is made up of:

3 atoms of Fe (molar mass of Fe = 55.845 g/mol)

2 atoms of P (molar mass of P = 30.973762 g/mol)

8 atoms of O (molar mass of O = 15.9994 g/mol)

To calculate the molar mass of Fe3(PO4)2, we add up the molar masses of each element:

Molar mass of Fe3(PO4)2 = 3(55.845 g/mol) + 2(30.973762 g/mol) + 8(15.9994 g/mol)

= 167.535 g/mol

So the molar mass of Fe3(PO4)2 is 167.535 g/mol

Learn more about Molar Mass here: https://brainly.com/question/12127540

#SPJ4

Other Questions
a 10-year-old child is brought to the office with complaints of severe itching in both hands that's especially annoying at night. on inspection, the nurse notes gray-brown burrows with epidermal curved ridges and follicular papules. the physician performs a lesion scraping to assess this condition. based on the signs and symptoms, what diagnosis should the nurse expect? 4. Renuka's teacher asks her to factorise completely 8x-12x. Renuka wrote 2x (4x-6) as her answer Explain why she does not score full marks and give the correct answer. Why is it called a dictionary? Geologists conclude that the clasts in layer A are older than the layer itself, Which geologic principle do the geologists use to draw this conclusion based on research, what type of foods would a registered dietitian recommend to reduce the risk of developing heart disease, stroke, diabetes, and other chronic diseases? the fluid-filled interior compartment of the thylakoid network is referred to as the: Morse code was invented and first used before the invention of the telephone. Explain how using electronic pulses to send messages in Morse code would have been an advantage over using your voice. A company models its net income, in thousands of dollars, with the function f(x) = 9x2 54x 144, where x is the number of units of its product sold. How many units of its product does the company need to sell in order for the net income to equal $0? jeff kaufman decides to bank with paris first national bank (pfn). he opens a checking account by depositing $1,000. according to the pfn balance sheet, after this initial $1,000 checkable deposit, there are $1,000 in: a client who suffered a crush injury to the leg has a highly positive urine myoglobin level. the nurse plans to monitor this particular client carefully for signs of which complication? four ambassadors and one advisor for each of them are to be seated at a round table with 12 chairs numbered in order 1 to 12. each ambassador must sit in an even-numbered chair. each advisor must sit in a chair adjacent to his or her ambassador. there are $n$ ways for the 8 people to be seated at the table under these conditions. find the remainder when $n$ is divided by $1000$. Sydney invests $100 every month into an account that pays 0.8% annual interest, compounded monthly. Benny invests $80 every month into an account that pays 2.2%annual interest rate, compounded monthly.a. Determine the amount in Sydney's account after 10 years.b. Determine the amount in Benny's account after 10 years.c. Who had more money in the account after 10 years? Sydneyd. Determine the amount in Sydney's account after 30 years. $40,672.12e. Determine the amount in Benny's account after 30 years.f. Who had more money in the account after 30 years? Benny The janitor of a high school is extremely efficient. by the end of each day, all of the school's waste is in plastic bags weighing between 1.01 pounds and 3.00 pounds. all plastic bags are then taken to the trash bins outside. one trip is described as selecting a number of bags which together do not weigh more than 3.00 pounds, dumping them in the outside trash can and returning to the school. given the number of plastic bags n, and the weights of each bag, determine the minimum number of trips the janitor has to make. for example, given n = 6 plastic bags weighing weight = [1.01, 1.99, 2.5, 1.5, 1.01], the janitor can carry all of the trash out in 3 trips: [1.01 + 1.99 , 2.5, 1.5 + 1.01]. write a java program to implement efficient janitor and explain the time complexity of your code. offshoring, producing goods in foreign countries, can save money. foreign laborers often do not require the same compensation or benefits as u.s. workers. this practice helps a business meet its financial goals, but it does not help the labor force within its own nation. in fact, with offshoring, local jobs are often eliminated, putting families and entire communities in economic jeopardy. what do you think? should businesses use offshoring to produce their products? are there any circumstances in which offshoring would be appropriate? Which represents the polynomial written in standard form?8x2y2 3x3y + 4x4 7xy34x4 3x3y + 8x2y2 7xy3 4x4 7xy3 3x3y + 8x2y24x4 + 8x2y2 3x3y 7xy37xy3 3x3y + 8x2y2 + 4x4 The term wellness can be defined as a state of optimal health and well-being, not simply the absence of illness, but an improved quality of life.T/F Is all real numbers infinity? The tape in a videotape cassette has a totallength 200 m and can play for 2.4 h. As thetape starts to play, the full reel has an outerradius of 41 mm and an inner radius of 11 mm.At some point during the play, both reels willhave the same angular speed.What is this common angular speed?Answer in units of rad/s. all evidences of the inspiration of the scriptures are internal (taken from the bible itself). truefalse Socialists in Oklahoma supported radically different ideas from Socialists elsewhere in the US. All of the following were Sooner Socialist ideasexcept__________.A.viewing farmers as part of the working classesB.rejecting organized religious doctrineC.arguing that socialism was more moral than capitalismD.believing that farmers were an important part of the socialist movement