pH calculations of strong base solutions are pretty direct. It all depends on how many OH- ions are dissociated and the concentration of the solution.
How do you determine the pH of powerful acids and bases?Calculating the pH of Strong Hcl and Base Solutions, Section 7.14 1 List a few potent acids and bases together with their names and formulae. 2 Describe the pH scale and convert pH to hydronium ion concentration. 3 Analyze the pH and pOH in powerful acid or base solutions.
[OH-] = 2 x 1.13x10^-2 M = 2.26x10^-2
pOH = -log[OH-] = 1.65
pH = 14 - 1.65 = 12.35
[H3O+] = 10^(-12.35) = 4.47x10^-13
NaOH – is it an Arrhenius base?As an illustration, the Arrhenius base NaOH generates OH ions.
Ca(OH)2:
[OH-] = 2 x 5.3x10^-4 M = 1.06x10^-3 M
pOH = -log[OH-] = 2.97
pH = 14 - 2.97 = 11.03
[H3O+] = 10^(-11.03) = 9.33x10^-12
[OH-] = 1.8x10^-4 M
pOH = -log[OH-] = 3.74
pH = 14 - 3.74 = 10.26
[H3O+] = 10^(-10.26) = 5.50x10^-11
To know more about ions visit:
https://brainly.com/question/14982375
#SPJ4
Which of the following BEST summarizes the relationship between dehydration reactions and hydrolysis? - Dehydration reactions can occur only after hydrolysis- Hydrolysis occurs during the day and dehydration happen at night - Dehydration reactions occur only in animals and hydrolysis reactions occur only in plants. - Hydrolysis creates monomers and dehydration reactions destroy them - Dehydration reactions assemble polymers and hydrolysis breaks them down
Dehydration reactions assemble polymers, and hydrolysis breaks them down is the best explanation of relationship between dehydration reactions and hydrolysis.
Dehydration is the reaction that combines monomers to form polymers, while hydrolysis breaks polymers down into monomers.
It is called a dehydration reaction because water molecules are released when the monomers combine. This happens because one monomer has a hydrogen atom (-H) at one end waiting to bond to a hydroxyl group (-OH) on another monomer.
The difference between hydrolysis and dehydration is that hydrolysis is the breaking down (dissolution) of large molecules into smaller molecules, while dehydration is the removal of water with the help of dehydrating agents to obtain new products. called dehydration condensation.
For more information on hydrolysis and dehydration kindly visit to
https://brainly.com/question/14834582
#SPJ4
Based on relative bond strengths, classify these reactions as endothermic (energy absorbed) or exothermic (energy released).
In chemistry, bond strength is the force that a chemical bond uses to hold two atoms together.
The bond dissociation energy, or the amount of energy needed to break a certain covalent bond in a mole of molecules, is a measure of a covalent bond's strength. Multiple bonds between the same atoms are more powerful than a single bond.
Chemical reactions that release energy are known as exothermic reactions. Light or heat are released as a result of this interaction. Energy is used in an endothermic reaction. Enthalpy, or delta H, is the change in heat energy. The reaction is exothermic if the product enthalpies are more than the total of the reactant enthalpies. The process is endothermic if the products side has a higher enthalpy than the process side. As a result, the reaction is exothermic if delta H is negative. A process is endothermic if delta H is positive.
Exothermic are: A+BC -> AB+C A2+B2 -> 2AB
Endothermic are: AB+C -> AC+B A2 + C2 -> 2AC B2+C2 -> 2BC
To know more about exothermic reaction
https://brainly.com/question/4345448
#SPJ4
The complete question is
Based on relative bond strengths, classify these reactions as endothermic (energy absorbed) or exothermic (energy released)
endothermic
B2+C2-->2BC
A+BC-->AB+C
exothermic
AB+C-->AC+B
A2+C2-->2AC
A2+B2-->2AB
Why is a hurricane classified as a natural hazard, while air pollution, acid rain, and ozone depletion are not?
A. A hurricane can vary in severity and destructiveness.
B.
A hurricane is a sudden, destructive event that cannot be predicted accurately.
0000
C.
A hurricane causes significant damage across a wide area.
D. A hurricane is a natural process, not the result of human activity.
Answer: D. A hurricane is a natural process, not the result of human activity.
Explanation: A hurricane is classified as a natural hazard because it is a natural phenomenon that occurs due to specific meteorological conditions, such as high ocean temperatures and specific wind patterns. It is not caused by human activity, unlike air pollution, acid rain, and ozone depletion, which are largely the result of human activities such as industrialization and deforestation. While hurricanes can vary in severity and destructiveness, and can cause significant damage across a wide area, it is ultimately the natural origin of the event that classifies it as a natural hazard.
question mode multiple choice question an unknown element has two isotopes: one whose mass is 68.926 amu (60.00% abundance) and the other whose mass is 70.925 amu (40.00% abundance). the average atomic mass of the element is equal to .
The average atomic mass of the element is calculated to be 69.7256 amu.
What is average atomic mass?The average atomic mass of an element is the weighted average mass of atoms in naturally occurring sample of the element.
Given, atomic mass of isotope-1 = 68.926 amu ; percent abundance of isotope-1 = 60.00% ; atomic mass of isotope-2 = 70.925 amu ; percent abundance of isotope-2 = 40.00%
Fractional abundance of isotope-1 = 0.6000
Fractional abundance of isotope-2 = 0.4000
Average atomic mass of an element = A
A = ∑ [Atomic mass of an isotope + fractional abundance of isotope]
A= 69.7256 amu
So, the average atomic mass of the element is equal to 69.7256 amu.
To know more about average atomic mass, refer
https://brainly.com/question/24666479
#SPJ4
in a reaction, a reactive intermediate . . . can never be isolated due to its high energy. is an energy maximum between 2 transition states. is an energy minimum between a reactant and a product. is always equal to the number of steps in a reaction. is an energy minimum between 2 transition states.
Because it always equals the total number of steps in a process, a reactive intermediate.
What is a reaction in science?In a chemical reaction, one or more chemicals, usually known as reactants, change into one or more other compounds, frequently referred to as products. Chemical parts or chemical elements make up substances. A response is a behavior, propensity, or course of action that is different from what was first intended. Decisions are taken in the heat of the moment without much thought or consideration of the potential repercussions. Reaction: Making a declaration in response to another person's action or remark.
What are examples of reactions and what causes chemical reactions?Changes in color, temperature, gas production, or precipitant formation are common outcomes of chemical reactions. Combustion, digestion, and cooking are a few straightforward instances of daily reactions.
Atoms create and break chemical bonds during chemical reactions. Reactants are the molecules that initiate a chemical reaction, and products are the compounds that are created as a result of the reaction.
To know more Chemical visit:
https://brainly.com/question/29039149
#SPJ4
the reaction, at 50% yield, produces 4.0 moles of n2. what was the mass of hydrazine used? assume that o2 is in excess.
N2(g) + 2 H2O N2(g) + O 2(g) (g) At a 50% yield, the process generates 4.0 moles of N2. Therefore, 4.0 * 100 / 50 = 8.0 moles of hydrazine are used to produce the theoretical yield of N2.
Are rockets still powered by hydrazine?
Hydrazine is still used in some military vehicles nowadays, but it's mainly used for extraterrestrial exploration. Hydrazine was used to help the Curiosity Rover touch down on Mars in 2012. Since then, it has been living there.
Why is hydrazine such a poison?
Since the liquid is caustic, both humans and animals who come into touch with it may develop dermatitis. Animals who were chronically (over a lengthy period of time) exposed to hydrazine through inhalation have shown effects on their thyroid, liver, spleen, and lungs.
To know more about hydrazine visit:
https://brainly.com/question/28170449
#SPJ4
Some unicellular organisms are sealed in a bottle with water, CO2, and some inorganic nutrients. Which of these is not a valid conclusion?A. If they grow only in sunlight, they could be eukaryotes or prokaryotesB. If they don?t grow in sunlight or in darkness, they could be eukaryotesC. If they grow in the dark or light after you add organic compounds, they could be eukaryotesD. If you add organic compounds and they grow only in sunlight, they must be eukaryotesE. If they grow in the dark after you add organic compounds, they could be prokaryotes
Some unicellular organisms are sealed in a water bottle with CO2 and some inorganic nutrients. B) If they don't grow in sunlight or in darkness, they could be eukaryotes is not a valid statement.
In unicellular organisms, oxygen diffuses through the cell membrane into the cell. Carbon dioxide diffuses out of the cell as soon as the carbon dioxide concentration inside the cell is higher than outside the cell. Some microorganisms, including some bacteria and fungi, can survive without oxygen. Single-celled organisms rely on diffusion to obtain some of the resources necessary for life and to remove waste products. It is no coincidence that almost all single-celled organisms live in water-based environments where dissolved nutrients are readily available just outside the cell membrane.
Learn more about the unicellular organism in
https://brainly.com/question/15299967
#SPJ4
a scientist is testing an unknown metal sample. he burns the sample and measures the spectrum produced. he concludes that the metal is sodium because of the characteristic bright yellow lines he observes. what is the general term for the type of technique he is performing?
The answer to the question indicates that the scientist is engaged in spectroscopy.
What is sodium's simple definition?(SOH-dee-um) A mineral required by the body to maintain the proper balance of body fluids. Table salt and many processed meals also contain sodium. The body may retain water if it is oversalted.
What functions does salt serve?In some nuclear plants, sodium is employed as a heat exchanger.It is also utilized in the chemical industry as a reagent. Instead, sodium salts are so much more advantageous than sodium alone. Sodium chloride is the most prevalent sodium compound (common salt). It is used to flavor meals and de-ice roadways in the winter.
To know more about Sodium visit :
https://brainly.com/question/29327783
#SPJ4
redox reaction occurs between iron and tin with the half-reactions shown. what can you conclude about the spontaneity of the reaction
The supplied question indicates that the iron-tin redox reaction's spontaneity is -0.92V.
Why is it known to as redox?The combined processes of reduction and oxidation are known as redox reactions due to their complimentary nature. The oxidant is the reactant that causes the oxidation, whereas the reducing agent itself reduces this reagent.
Why is redox one such big deal?Given that they are the primary sources of power on this world, both spontaneous and man-made (or "redox"), oxidation-reduction processes are significant. Massive amounts of energy are often generated when molecules undergo oxidation through the elimination of hydrogen or in conjunction with oxygen.
Al^3+(aq) + 3e− = Al(s) Eº = −1.66 V
Cr(s) = Cr^3+(aq) + 3e− Eº = +0.74 V
Adding #1 and #2 gives:
Al^3+(aq) + 3e− + Cr(s) = Al(s) + Cr^3+(aq) + 3e− Eº = −0.92 V
Removing 3e- from both sides:
Al^3+(aq) + Cr(s) = Al(s) + Cr^3+(aq)
Eº = −0.92 V
To know more about redox visit:
https://brainly.com/question/13293425
#SPJ4
a typical sugar cube has an edge length of 1 cm. if you had a cubical box that contained a mole of sugar cubes, what would its edge length be? (one mole
the edge length of a cuboidal box that contains a mole of sugar cubes would be 5.04 cm.
What is cuboidal box?A cuboidal box is a three-dimensional shape with six equal-sized, square faces that meet at 90 degree angles. It is a form of rectangular prism, and is commonly used for shipping and storage of items. Cuboidal boxes are made from a variety of materials, including cardboard, wood, and plastic.
A mole is a unit of measurement for the amount of a substance and is equal to 6.02214076 × 10^23 particles or atoms of the substance. Therefore, the edge length of a cuboidal box that contains a mole of sugar cubes would be the cube root of the total volume of the sugar cubes, which is the edge length of each cube cubed.
The volume of a single sugar cube is (1 cm)^3 = 1 cm^3. Therefore, the volume of a mole of sugar cubes is (6.02214076 × 10^23) cm^3.
To find the edge length of the box, take the cube root of the volume of the sugar cubes, which is (6.02214076 × 10^23)^(1/3) cm = 5.04 cm.
Therefore, the edge length of a cuboidal box that contains a mole of sugar cubes would be 5.04 cm.
To learn more about particles or atoms
https://brainly.com/question/28280183
#SPJ4
How is an empirical formula calculation related to a percent composition calculation?
Take the percentages divide them by the atomic relative mass of the atoms. After dividing you will get the values. Divide all the values with the smallest value which you get and by doing this you will get a ratio and this will be the empirical formula.
What is meant by smallest value?The smallest value in a list of numbers is referred to as the minimum (the greatest value is called the maximum).
The lowest point on a vertex is the minimal value of a function. Your quadratic equation will have a minimal value if it contains a positive term.
By graphing the function or by applying one of the two equations, you can determine this minimum value.
The lowest point on a vertex is the minimal value of a function. Your quadratic equation will have a minimal value if it contains a positive term.
By graphing the function or by using one of the two equations, you can determine this minimum value.
To know more about empirical formula visit:
https://brainly.com/question/14044066
#SPJ4
Which of the following phase changes involves the transfer of heat from the surroundings to the system?answer choicesCH4(g)→CH4(l), because CH4 molecules in the gas phase must absorb energy in order to move closer together, thereby increasing the intermolecular attractions in the solid state.CO2(g)→CO2(s), because CO2 molecules in the gas phase must absorb energy in order to move closer together, thereby increasing the intermolecular attractions in the liquid state.H2O(l)→H2O(s), because H2Omolecules in the liquid phase must absorb energy in order to create a crystalline structure with strong intermolecular attractions in the solid state.NH3(l)→NH3(g), because NH3molecules in the liquid phase must absorb energy in order to overcome their intermolecular attractions and become free gas molecules.
When heat is added to a system, the process becomes endothermic, and endothermic processes related to phase change occur when going from solid to liquid or from liquid to gas, so heat is eventually transferred from the environment to the environment increase.
System - He considered all four options of moving from gas to liquid requiring the release of energy, as this is the source of heat. The change from gas to solid also requires the release of energy, and the change from liquid to solid requires the release of energy. But as we climb the ladder of physical states, we progress from solids to liquids to gases. Next, we need to add energy to the only one we ascend.The ladder is the last 1 d where the ammonia liquid moves to the ammonia gas, overcoming the intermolecular attraction and pushing the ammonia molecules into the liquid It must be absorbed to keep it together inside.
For more information on endothermic reaction kindly visit to
https://brainly.com/question/23184814
#SPJ4
___ takes place when a hot body of magma intrudes into the cold, upper part of the crust.
Answer: contact metamorphism
Explanation:
Contact metamorphism happens when a body of magma intrudes into the upper part of the crust. Heat is important in contact metamorphism, but pressure is not a key factor, so contact metamorphism produces non-foliated metamorphic rocks such as hornfels, marble, and quartzite.
what is required in order to have an effective collision? [select all that apply] group of answer choices a collision with transfer of sufficient energy to overcome the activation energy a collision simultaneously involving three or more reactants. a collision of the correct orientation between reactants. a slow and gentle collision so that the reactants can form a bond instead of bouncing off one another.
Reactant particles need to have a certain minimum amount of energy in order to make an effective collision. The activation energy is the energy that starts the reaction.
What three conditions must be met for a reaction to take place?A reaction can only happen if three things take place.The atoms must collide.In order for new bonds to form, molecules must collide with sufficient force to start breaking the existing connections. ( Remember activation energy).Molecules must collide with the correct orientation.What in collision theory is EA?E is the constant 2.7183, Ea is the activation energy expressed in joules per mole, and. The frequency factor, or A, is a constant that depends on the frequency of collisions and the orientation of the reacting molecules.
Learn more about activation energy here:
brainly.com/question/28384644
#SPJ4
look at the melting point for the metals in the fourth and fifth periods describe how the position of a metal within a period is related to irs melting point
With the same number of elements and overall structure as period 4, period 5 differs only in having one more post transition metal and one fewer nonmetal.
How do melting and boiling points differ?The major distinction between boiling point and melting point is the temperature at which a liquid's vapour pressure equals its external pressure whereas the melting point is the temperature at which solid and liquid phases are in balance.
How is melting point determined?More energy is required to overcome them the stronger the forces of attraction between the particles are. The melting point rises with increasing energy demand. Therefore, a crystalline solid's melting temperature serves as a gauge.
To know more about melting point visit:
https://brainly.com/question/29578567
#SPJ1
Violet has found a container of aluminum bromide that says it contains 3.09 moles of AlBr3. What is the mass of this sample of aluminum bromide? Please round your answer to two digits after the decimal point, and remember to include correct, complete units (including substance formula).
The mass of 3.09 moles of [tex]AlBr_3[/tex] would be 825.03 grams.
Calculating mass from molesThe number of moles present in the mass of a substance is the ratio of the mass of the substance and the molar mass of the substance.
In other words, mole = mass/molar mass. Making the mass the subject of the formula:
mass = mole x molar mass.
Molar mass of [tex]AlBr_3[/tex] = 267 g/mol
Mass of 3.09 moles [tex]AlBr_3[/tex] = 3.09 x 267
= 825.03 grams
In other words, the mass of the 3.09 sample of aluminum bromide would be 825.03 grams.
More on mole and mass of substances can be found here: https://brainly.com/question/21042927
#SPJ1
What do l talk about on my timelines?
Timelines are intended to give a general perspective of a series of historical events. Although they don't go into great length, as necessary, connections to photographs, information, and events may be added.
What are Timelines?History textbooks and biographies frequently employ timelines to illustrate what occurred over a specific time period or to a specific person, beginning with the earliest event and going ahead in time. For instance, your own personal chronology can start with your birth.
Timelines are meant to provide a broad overview of a number of historical events.
There may be connections to images, facts, and events, albeit they don't go into great detail unless essential.
Thus, this way, one can have their timeline.
For more details regarding timeline, visit:
https://brainly.com/question/20838835
#SPJ1
A borrower received a 30-year ARM mortgage loan for $200,000. Rate caps are 3/2/6. The start rate is 3.50% and the loan adjusts every 12 months for the life of the mortgage. The index used for this mortgage is LIBOR (for this exercise, 3.00% at the start of the loan, 4.45% at the end of the first year, and 4.50% at the end of the second year). The margin on the loan is 3.00%, which remains the same for the duration of the loan.
The margin on the loan is 3.00%, which remains the same for the duration of the loan.
(1) The initial rate (start rate) the borrower will pay during the first year is 3.50%.
(2) To calculate the interest rate after the first rate adjustment, we must use the "stair step method" which involves comparing the fully indexed rate (FIR) to the rate cap and the initial rate. The index rate used for this mortgage is MTA, which is 4.45% at the end of the first year. The margin on the loan is 3.00%, which remains the same throughout the loan.
FIR = 4.45% + 3.00% = 7.45%
The rate cap for the first year is 3%, so the interest rate can increase by a maximum of 3%.
The interest rate the borrower will pay after the first rate adjustment is 3.50% + 3% = 6.50%.
(3) To calculate the fully indexed rate (FIR) after the second year, we add the index rate to the margin:
FIR = 4.50% + 3.00% = 7.50%
(4) The rate cap for the second year is 2%, so the interest rate can increase by a maximum of 2%.
The maximum interest rate the borrower will pay during the 30-year term for this loan is 3.50% + 3% + 2% = 8.50%.
(5) If the interest rate is at its maximum, the MTA index would have to be at least 8.47% in order to reach the maximum interest rate, assuming that the margin remains 3.00%.
Read more about Stair Step Method:
https://brainly.com/question/29855055
#SPJ4
40 points will give brainliest!!
0.50 moles of gas take up 10.5 L
of space under constant pressure
and temperature conditions.
What volume is required to hold
2.0 moles of the gas?
Answer:
The volume required to hold 2.0 moles of the gas is 21 L. This is because the volume of a gas is directly proportional to the number of moles of gas present (provided that the temperature and pressure remain constant). Therefore, if 0.50 moles of gas takes up 10.5 L of space, then 2.0 moles of the gas would take up 2 * 10.5 L = 21 L of space. This proportionality can be expressed mathematically as:
V1/n1=V2/n2
Where V1 and V2 are the volumes of the gases, n1 and n2 are the number of moles of the gases, and the temperature and pressure are constant.
Answer:
The volume required to hold two moles of the gas is 42 L
Explanation:
By using ratio set up of moles and volume;
moles : volume
0.50 : 10.5
2.0 : X
Thus X would be equal to:
(2.0 x 10.5)/0.50
= 21/0.50
= 42 L
a chemist divides a 15.0 liter solution into two portions. the first portion has four times the volume of the second. find the volume of the second portion.
The volume of the second portion is 3.75 liters. To solve this problem, let x represent the volume of the second portion. We can then set up the equation
what is equation?A mathematics statement that expressions are equal is known as an equation. It consists of two expressions separated by an equals sign, and the expressions on either side can be numbers, variables, or a combination of both. Equations are used to solve problems in mathematics, science and engineering, and are fundamental to the study of these disciplines. Equations can be used to describe relationships between different elements of a system, such as the force of gravity on a falling object or the momentum of a moving object. Solving equations involves manipulating the equation to find the values of the unknown variables, and this process is called solving the equation.
4x = 15.0
Solving for x, we get:
x = 15.0 / 4
x = 3.75
Therefore, the volume of the second portion is 3.75 liters.
To learn more about equation
https://brainly.com/question/28818351
#SPJ4
how many hydrogen atoms are connected to the carbon atom that bears the negative charge in the structure below?
In the structure below, the carbon atom that bears the negative charge is connected to two hydrogen atoms.
What is hydrogen atom?Hydrogen Atom is a single atom composed of one proton and one electron. It is the simplest and most abundant type of atom in the universe, making up about 75% of all matter. Hydrogen atoms are extremely small and have no measurable volume. They are held together by the electromagnetic force between the positively charged proton and the negatively charged electron.
This is because the two red dots, which represent the negative charge, are at the end of two single bonds connected to two hydrogen atoms. Therefore, the carbon atom is connected to two hydrogen atoms.
To know more about hydrogen atom click-
https://brainly.com/question/28499820
#SPJ4
2. atoms are typically spaced about 0.2 nm apart. at that spacing, how many atoms would be found in a line 2.5 inches long?
The number of atoms would be found in a line 2.5 inches long is 3.17510^12 atoms
What three sorts of atoms are there?The three fundamental types of particles that comprise an atom are protons, electrons, and neutrons. Protons and neutrons generally have the same mass, however the mass of the electron is quite small. A negative has no charge, while a proton has a positive charge.
2.5 inches is equal to about 63.5 centimeters.
There are 10^10 nanometers in one centimeter.
=> (10^10)x(63.5) = 6.3510^11 nanometers
At an atom spacing of 0.2 nanometers:
=>6.3510^11 / 0.2 = 3.17510^12 atoms in a line
To know more about atoms visit:
brainly.com/question/1566330
#SPJ4
Please reply ASAP!!!!! Do you expect a liter of water from this lake to have more or less thermal energy than a liter of water from the lake on the previous page? Why?
A liter of water from this lake will have more thermal energy than a liter of water from the lake on the previous page.
This is because the water in the second lake is at a higher temperature than the water in the first lake.
How does temperature affect the thermal energy of a substance?The thermal energy and hence, the average kinetic energy of an object's particles increases with increasing temperature. The object's thermal energy grows as the average kinetic energy of its particles rises. As a result, an object's thermal energy rises as its temperature does.
Thus, a substance at a higher temperature has more thermal energy than particles at a lower temperature
Learn more about thermal energy and temperature at: https://brainly.com/question/19666326
#SPJ1
Describe the process of calculating the molar mass of Li2S.
The molar mass of the compound as shown is 46 g/mol.
What is the molar mass?We know that the molar mass is the mass of one mole of the substance. In the case of the compound that we have here we have to find out what the molar mass of the compound is.
First, we have to know the relative atomic mass of each of the atoms in the compound. We have that;
Mass of the lithium = 7
Mass of sulfur = 32
Then we would have;
Relative atomic mass = 2(7) + 32 = 46 g/mol
The compound would then has a mass of 46 grams per mole.
Learn more about relative atomic mass:https://brainly.com/question/25698972
#SPJ1
if the bond length of h2 is experimentally found to be 72 pm and the bond length of br2 is experimentally found to be 240 pm, what is the bond length of hbr?
If the bond length of H₂ is experimentally found to be 72 pm and the bond length of Br₂ is experimentally found to be 240 pm, the bond length of HBr is 158.5 pm.
The distance between the centers of two bonded atoms is known as the bond length. Consider the fact that the atomic radius of an element is equal to one-half the distance between the bound atoms in a homonuclear diatomic molecule (sometimes referred to as the covalent or bonding atomic radius).
Every time two nuclei are brought closer together to build a stronger relationship, the link gets shorter. The coulombic attraction on the bonding electrons pulls the nuclei together, resulting in a shorter bond.
The bond length of HBr can be calculate as follows:
Bond length of bromine molecule = 240 pm
Bond length of hydrogen molecule = 77 pm
radius of bromine (r Br) = 240pm/ 2 = 120 pm
radius of hydrogen (rH) = 77/2 = 38.5 pm
Bond length of C-Cl = rH+ rBr = 120 pm + 38.5 = 158.5 pm
Therefore, the bond length of HBr is 158.5 pm.
Learn more about bond length at https://brainly.com/question/20910787
#SPJ4
How to write chemical formulas of ionic compounds and how are they named?
Ionic compounds are composed of positively charged ions (called cations) and negatively charged ions (called anions). The chemical formula of an ionic compound is written by combining the chemical symbol for the cation and the chemical symbol for the anion.
For example, the ionic compound formed by the cation sodium (Na+) and the anion chloride (Cl-), would be written as NaCl.
When writing the chemical formula for an ionic compound, the cation is written first followed by the anion. This is because the cation and anion are attracted to each other and they combine to form a neutral compound.
Naming ionic compounds follows specific rules:
The cation name is the same as the element name.In summary, to write the chemical formula of ionic compounds, one must know the ionic charges of the elements and to name them, one must know the element names and the suffix -ide, if the cation has variable charge use roman numeral to indicate its charge.
Learn more about Ionic Compounds here: https://brainly.com/question/29005103
#SPJ4
The molar solubility of Ca(OH)2 was experimentally determined to be 0.020 M. Based on this value, what is the Ksp of Ca(OH)2
The molar solubility of Ca(OH)2 was experimentally determined to be 0.020 M. Based on this value, the Ksp of Ca(OH)2 is 0.040.
The Ksp (solubility product) is a measure of the maximum solubility of a substance in a solution at equilibrium. The Ksp of a substance represents the product of the molar concentrations of the ions that make up the solute at equilibrium. In the case of Ca(OH)2, it is the product of the molar concentrations of Ca2+ and OH−, which is expressed as
Ksp = [Ca2+][OH−]
The molar solubility of Ca(OH)2 is the maximum molar concentration of Ca2+ and OH− ions that are present in an equilibrium solution. By substituting the molar solubility (0.020 M) into the Ksp equation, we can calculate the Ksp of Ca(OH)2.
Ksp = [Ca2+][OH−] = 0.020 M
Since the molar concentrations of Ca2+ and OH− ions are equal, we can simplify the equation to : Ksp = [Ca2+]2 = 0.020 M, Solving for [Ca2+], we get [Ca2+] = √0.020 M,The Ksp of Ca(OH)2 is then Ksp = [Ca2+]2 = (√0.020 M)2 = 0.040 M
To know more about molar solubility refer to the link brainly.com/question/28170449
#SPJ4
What is the original temperature of the water from this question? Please help!
Answer: A temperature of 273 K is the temperature at which water FREEZES.
The original temperature of the water was 20.64°C (rounded to two decimal places).
To find the original temperature of the water, we can use the formula for heat transfer:
Q = m * c * ΔT
where Q is the heat transferred, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
Given:
Q = 3200 J (heat transferred)
m = 25 g (mass of water)
c = 4.18 J/g°C (specific heat capacity of water)
We want to find ΔT, which is the change in temperature.
Rearrange the formula to solve for ΔT:
ΔT = Q / (m * c)
ΔT = 3200 J / (25 g * 4.18 J/g°C)
ΔT ≈ 30.62°C
Now, we can find the original temperature of the water:
Original temperature = Final temperature - ΔT
Original temperature = 67°C - 30.62°C
Original temperature ≈ 36.38°C
So, the original temperature of the water was approximately 36.38°C.
To learn more about heat transfer here
https://brainly.com/question/16951521
#SPJ2
what are some questions you can investigate using the periodic table to figure out whether the poison was phosphorus or radium? give a reason for asking your question.
To investigate using the periodic table is that The color of the element. The exposure test of the element. The boiling and the me radium is radioactive. The radium is not available for the general public purpose.
In the periodic table there are some question to investigate whether the the poison was phosphorus or radium are :
Atomic radius of the element.The color of the elementThe exposure test of the elementThe boiling and the melting point of the element.The red phosphorus in its purest form consider as the non toxic. The white phosphorus is the deadly poison , when exposed to the air.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
what is the final product in this nuclear equation when 226 88 ra undergoes alpha decay ? 226 88 ra --> 42 he ?
Radon-222 22286Rn is produced by the alpha decay of radium-226 22688Ra.
What is nuclear reaction?A nuclear reaction is a process in nuclear physics and nuclear chemistry in which two nuclei, or a nucleus and an external subatomic particle, collide to produce one or more new nuclides. As a result, a nuclear reaction must result in the transformation of at least one nuclide. The splitting of the uranium-235 nucleus when bombarded with neutrons is an important example of nuclear fission. This nuclear reaction can produce a variety of products, as shown in the equations below. The splitting of the plutonium-239 nucleus is another important example of nuclear fission.
Here,
The alpha decay of radium-226 22688Ra produces radon-222 22286Rn.
To know more about nuclear reaction,
https://brainly.com/question/16526663
#SPJ4
