For horizontally-launched projectiles, which of the following describes acceleration in both directions with a⃗ x=0 and a⃗ y=−9.8 m/s2

A. Acceleration is −9.8 m/s2 in both directions.
B. Acceleration is constant in both directions.
C. Acceleration is equal in both directions.
D. Acceleration is zero in both directions.

The two risks to company profits they should include in their analysis are less efficient production and unsafe working conditions, therefore the correct answer is options A and E.

Science is the methodical, empirically-based pursuit and application of knowledge and understanding of the natural and social worlds.

As given in the problem If a team of engineers is doing a cost-benefit analysis to determine whether they should develop new technology, then the two risks to company profits they should include in their analysis,

The new technological design could take more time during manufacturing and production which can lead to less efficient production.

Therefore the correct answer is option A and option E.

To learn more about the science here, refer to the link;\

https://brainly.com/question/18186842

#SPJ1

Answer:

a phase change occurs when the pressure on the system changes. during pressure change on the system changes the object is going through the phase change of melted then solid, melting, liquid, and then vaporization. sense it is going from a solid state to a melting state. the particles are Freezing: liquid to solid. Melting: solid to liquid. Condensation: gas to liquid. Vaporization: liquid to gas. Sublimation: solid to gas. Deposition: gas to solid. during the a phase change the energy of the particles are The energy that is changing during a phase change is potential energy. During a phase change, the heat added increases or released decreases will allow the molecules to move apart or come together. a phrase change occurs because a phase change is when matter changes to from one state to another example: solid to liquid. another reason why a phase change occurs is because water is a substance that has many interesting properties that influence its phase changes. Most people learn from an early age that water melts from ice to liquid at 0°C, and boils from a liquid to a gas at 100°C  but this isn't true in all circumstances. The pressure affects these transition points, so for water, the boiling point actually decreases as the pressure decreases.

________________________________________________________

Have a good day!

-Asher

A certain car with an accelerating rate of 0.59 m/s2 will take 5.30 s to go from a speed of 50 mi/h to a speed of 57 mi/h

The formula for Uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:

t = (vf - vi) /a

Where:

Information about the problem:

By converting the velocity from mi/h to m/s, we get:

50 mi/h * (1609.34 m / 1 mi) * (1h / 3600 s) = 22.35 m/s

57 mi/h * (1609.34 m / 1 mi) * (1h / 3600 s) = 25.48 m/s

Applying the time formula, we have:

t = (vf - vi) /a

t = ( 25.48 m/s - 22.35 m/s) / 0.59 m/s2

t = 3.13 m/s  /0.59 m/s2

t =  5.30 s

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

Answer:

Group

Explanation:

Within each column, or group, of the table, all the elements have the same number of valence electrons. This explains why all the elements in the same group have very similar chemical properties. For elements in groups 1–2 and 13–18, the number of valence electrons is easy to tell directly from the periodic table.

It's "possible", but it's very very very rare.  In fact, there are only two known substances that can contract when their temperature increases.

One of them is water.  When water warms from 0°C to 4°C, it contracts.

I can't remember what the other substance is.

The maximum speed at which a car can negotiate a flat curve with radius 205m at maximum acceleration of 5.0m/s2 is 32m/s.

Given data

Radius of curve = 205m

Speed (v) =?

Acceleration (a) = 5.0m/s2

The expression for the centripetal force acting on the car

F_c=(mv^2)/r

The expression for the force acting on the car.

F=ma

             Equating the force acting on the car to centripetal force,

F_c=F

(mv^2)/r= ma

            Making v the subject of the equation above

v=√ar  

          Putting the values of a and r into the expression above

v=√(5×205)  

v=√1025  

v=32.02 m/s

Approximately,

v=32 m/s

To learn more about maximum speed and acceleration. Click, https://brainly.com/question/14825931.

#SPJ4

It takes 126 s for the sphere to cool by 1K due to its radiation of heat energy and this can be calculated with the help of emissivity formula.

Radiation can be defined as the release of energy in the form of electromagnetic waves or ionizing particles, especially high-energy particles.

This release of energy can be in the form of waves or particles.

Density pf copper = 8900

Radius of sphere = 5cm

emissivity = 1

initial temperature = T=300K

we know [tex]\delta[/tex]t = [tex]\frac{\delta Q}{H}[/tex] = [tex]\frac{mc \delta T}{A \sigma e T^4}[/tex]

We can express it as

m = [tex]\rho V[/tex]

A = 4[tex]R^{2} \pi[/tex]

[tex]\delta t = \frac{\rho Vc \delta T}{4R^2 \pi \sigma e T^4}[/tex]

Volume V = 4/3 [tex]R^{2}\pi[/tex][tex]\delta t = \frac{\rho 4/3 R^3\pi c \delta T}{4R^2\pi \sigma e T^4}[/tex]

[tex]\delta t = \frac{\rho Rc \delta T}{3 \sigma e T^4}[/tex]

[tex]\delta t[/tex] = [tex]\frac{8900*0.05*390*1}{3*5.67*10^{-8}*1*300^4}[/tex]

[tex]\delta t[/tex] = 126s

To know more about heating visit:

https://brainly.com/question/1429452

#SPJ4

You need to analyse what is possible and get the answer.

#SPJ4

The all-or-none law is the principle that states, once the threshold has been crossed, the action potential either fires or it does not. there is no half measure.

The all-or-none law: It is a principle which states that the strength of a response of a muscle fiber or nerve cell is not dependent on the  stimulus strength. If the stimulus is above the certain threshold, a muscle fiber or nerve  will fire.

Essentially, there will be either a full response or no response for an individual muscle fiber or neuron. Therefore action potential is essentially a full response.

There is no thing as a strong or weak action potential. Instead, it is always All-or-nothing process.

This will minimize the possibility of information that will be lost in the way.

To learn more about The all-or-none law, refer

https://brainly.in/question/13509691

#SPJ4

It is frequently necessary to produce volume measurements in quantitative chemistry with an error of 0.1%, or one part per thousand.

Utilizing volumetric glassware with a known capacity down to a few hundredths of a milliliter, or approximately 0.01 mL, is required for this.

Five different types of glassware, including graduated cylinders, beakers, volumetric pipets, burets, and volumetric flasks, are frequently used to measure out precise volumes.

The most exact glassware are volumetric pipets, flasks, and burets; the glassware manufacturers calibrate these to a high degree of accuracy.

To know more about volumetric glassware visit:

https://brainly.com/question/14466186

#SPJ4

Answer:

C. Hawaiian

Explanation:

Ego's father and all male relatives in his generation have the same kin name. Ego's mother and all female relatives in her generation are referred to by the same kin term.

Similarly, all brothers and male cousins are linked by giving them the same kin term. Sisters and all female cousins are also referred to by the same term.  

According to frictional force, the normal force is 3782.61 N.

We need to know about frictional force to solve this problem. The frictional force is the force against the object to move. The magnitude of the frictional force can be determined as

Ff = N . μ

where Ff is the frictional force, N is normal force and μ is coefficient of friction

From the question above, we know that

Ff = 870 N

μ = 0.23

By substituting the given parameters, we can determine the normal force

Ff = N . μ

870 = N . 0.23

N = 870 / 0.23

N = 3782.61 N

Hence, the normal force is 3782.61 N.

Find more on frictional force at: https://brainly.com/question/4618599

#SPJ4

The notion that every stimulus pattern is seen in such a way that the resulting structure is as simple as possible is called the law of pragnanz

The law of prägnanz is also known as the law of simplicity or the law of good figure . This law states that when presented with a group of ambiguous or complicated objects, your brain will simplify them as much as possible. When presented with the Olympic logo, for example, you see overlapping circles rather than a jumble of curved, connected lines.

To learn more about the law of pragnanz /simplicity/ good figure: brainly.com/question/3053095

#SPJ4

The velocity the bullet used in leaving the gun is 586 m/s (Option 1)

We'll begin by obtaining the time taken for the bullet to hit the ground. This is illustrated below::::

h = ½gt²

47 = ½ × 10 × t²

47 = 5 × t²

Divide both side by 5

t² = 47 / 5

Take the square root of both side

t = √(47 / 5)

t = 3.07 s

Finally, we shall determin the the velocity. This is illustrated below:

s = ut

1800 = u × × 3.07

Divide both sides by 3.07

u = 1800 / 3.07

u = 586 m/s

Thus, the velocity the bullet used in leaving the gun is 586 m/s (Option 1)

Learn more about motion under gravity:

https://brainly.com/question/20385439

https://brainly.com/question/22719691

#SPJ1

The wavelength associated with the particle of mass 1 mg and velocity

1 km/s is 6.63 x [tex]10^{-31}[/tex] m.

We have a particle moving with certain velocity.

We have to calculate the wavelength associated with the particle.

According to de - Broglie, the wavelength of the wave associated with the moving particle is -

λ = h/mv

Where -

h -  Planck's constant

mv - Momentum of particle

According to the question -

Mass = 1 mg =  10⁻⁶ Kg

velocity = 1 Km/s = 1000 m/s

Using the formula for de - Broglie wavelength discussed above -

Momentum = mv = 10⁻⁶ x 10³ = 10⁻³ Kg m/s

now -

λ = h/10⁻³ = 6.63 x 10⁻³⁴/10⁻³ = 6.63 x 10⁻³¹ m

Hence, the wavelength associated with the particle is 6.63 x 10⁻³¹  m.

To solve more questions on de - Broglie wavelength, visit the link below-

https://brainly.com/question/14952389

#SPJ1

a) The velocity when it return to the ground is 9 m/s

b) The total time taken is 1.84 s

c) The highest distance covered is 4.2 m

We have to know that when an object has been projected upwards or downwards that the movement of the objects could be described by the use of the equations of motion under gravity. In that case we have to look at that tennis ball is thrown vertically upward with an initial velocity of +9.0

m/s as an object that is undergoing motion under gravity.

We now have;

The time taken for the ball to reach the starting point;

v = u - gt

At the maximum height the ball is stationary thus v = 0 m/s

t =u/g

t = 9.0 m/s / 9.8 m/s^2

t = 0.92 s

Given that the ball went up and came down the time taken to return to starting point = 2(0.92) = 1.84 s

The highest distance covered by the ball is obtained from;

h = ut - 1/2gt^2

h = 9 * 0.92 - (0.5 * 9.8 * (0.92)^2)

h = 8.3  - 4.1

h = 4.2 m

The highest distance covered is 4.2 m

The balls speed when it returns;

Recall that it now falls from a height thus u = 0 m/s

v = u + gt

v = gt

v = 9.8 * 0.92

v = 9 m/s

The velocity when it return to the ground is 9 m/s

Learn more about motion under gravity:https://brainly.com/question/13194563

#SPJ1

The magnitude of cyclist's displacement who has a average velocity of 20 m / s in 5 seconds is 100 meters

v = d / t

v = Velocity

d = Distance

t = Time

v = 20 m / s

t = 5 s

d = v * t

d = 20 * 5

d = 100 m

Velocity of an object is the rate of change of distance by the object in a given amount of time. It is denoted by v.

Therefore, the magnitude of cyclist's displacement who has a average velocity of 20 m / s in 5 seconds is 100 meters

To know more about Displacement

https://brainly.com/question/28609499

#SPJ1

The height of the cliff is [tex]$90.69 \mathrm{~m}$[/tex]

The initial speed of the stone vi = 10m/s

The stone is also moving downward vertically under the effect of the gravitational acceleration [tex]$g=9.81 \mathrm{m} / \mathrm{s}^2$[/tex]

Thus, the stone will have two velocity components while moving. One component is the horizontal speed which will be constant during motion and the other component is the vertical speed which will increase under the effect of gravitational acceleration.

Hence, the final vertical speed when the stone hits the ground is

[tex]$$\begin{aligned}&V_y=V_{y o}+g t \\&V_y=0+9.81(4.3)=42.183 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

The height of the cliff where the stone is thrown is

[tex]$$\begin{aligned}&h=\frac{\left(V_y\right)^2-\left(V_{y o}\right)^2}{2 g} \\&h=\frac{42.183^2-(0)^2}{2(9.81)} \\&h=90.69 \mathrm{~m}\end{aligned}$$[/tex]

So, the height of the cliff is [tex]$90.69 \mathrm{~m}$[/tex]

To know more about  gravitational acceleration visit: https://brainly.com/question/13769294

#SPJ4

Answer:

Доброе утро, ответ 5+5="4

Explanation:

The maximum height to which the potato will rise is 13.06 m

From the question given above, the folloing data were obtained:

The maximum height can be obtaibed as illustarted below

v² = u² – 2gh (since the ball is going against gravity)

0² = 16² – (2 × 9.8 × h)

0 = 256 – 19.6h

Collect like terms

0 – 256 = –19.6h

–256 = –19.6h

Divide both side by –19.6

h = –256 / –19.6

h = 13.06 m

Thus, the potato will rise to a height of 13.06 m

Learn more about motion under gravity:

https://brainly.com/question/22719691

#SPJ1

By ideal gas approximation, the final pressure is 75.76 atm.

We need to know about the ideal gas theory to solve this problem. The ideal gas is assumed that there is no interaction between particles in a gas. It can be determined by the equation

P . V = n . R . T

where P is pressure, V is volume, n is the number of moles gas, R is the ideal gas constant (8.31 J/mol.K) and T is temperature.

From the question above, we know that

P1 = 50 atm

T1 = 330 K

T2 = 500 K

When the initial and final volume is the same, we can use the ratio of pressure and temperature as

P1 / P2 = T1 / T2

50 / P2 = 330 / 500

P2 = 50 x 500 / 330

P2 = 75.76 atm

Find more on ideal gas at: https://brainly.com/question/25290815

#SPJ4

d(u, v) = [tex]\sqrt{34}[/tex]

An inner product of a real vector space V is an assignment that for any two vectors u, v ∈ V, there is a real number hu, vi,

d(u, v) = ║u - v║ = [tex]\sqrt{(u_{1} - v_{1} )^{2} + (u_{2} - v_{2} )^{2}[/tex]

<u = v> = 3u₁v₁ + u₂v₂

u = (-3,9)

v = (0,4)

So, d(u, v) = [tex]\sqrt{(-3 0)^{2} + (9 - 4)^{2}[/tex]

                = [tex]\sqrt{9 + 25}[/tex] = [tex]\sqrt{34}[/tex]

d(u, v) = [tex]\sqrt{34}[/tex]

To know more about the inner product, refer to the following link :

https://brainly.com/question/13136538?referrer=searchResults

#SPJ4

The  given coefficient of linear expansion of glass is [tex]9 \times 10^{-6}[/tex]/°C.

change in area =[tex]a_1[/tex][tex]\times[/tex]β[tex]\times[/tex]ΔT

where β=2α

so,

[tex]60\times 150\times2\times9\times10^{-6}\times36 = 5.832cm^{2}[/tex]

To know more about  linear expansion   visit : https://brainly.com/question/27955197

#SPJ4

The tension in the rope which a climber, that has a mass of 60 kg, is hang motionless is 588 N

The tension formula and the procedure we will use is:

T = m * g

Where:

Information of the problem:

Knowing that the body is in equilibrium the tension of the rope is equal to the gravity force. Applying the tension formula and substituting values we have:

T = Fg

Fg = m * g

Fg = 60 kg * 9.8 m/s²

Fg = 588 N

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

Learn more about force at: brainly.com/question/12970081

#SPJ4

By using uniform motion, the distance is 66.64 meters.

We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

vo = 0 m/s

vt = 100 km/h = 100000/3600 m/s =  27.78 m/s

t = 4.8 s

Calculate the acceleration

vt = vo + a . t

27.78 = 0 + a . 4.8

4.8a = 27.78

a = 27.78 / 4.8

a = 5.79 m/s²

Find the distance

vt² = vo² + 2a . s

27.78² = 0² + 2 . 5.79 . s

11.58s = 771.73

s = 66.64 m

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

This suggests the percentage of those who come lower back on your blog each and every week after their first visit.

As an example, if this week you had one hundred human beings go to your blog and inside the week one column, it suggests seventeen percent. which means of the initial a hundred human beings, seventeen got here returned. underneath week two in case you see eight percent, that means of the preliminary a hundred human beings, eight humans came lower back in two weeks.

This quantity will keep getting smaller, but the goal is to get humans back as often as viable. That increases belief, social shares, and the capability of people to link to you, and it even will increase the odds that the vacationer will convert right into a customer. The Pageviews column tells you ways generally each individual blog published was regarded in the decided on time-frame. The specific Pageviews column simply to the right of it tells you ways a lot of those pageviews were from precise visitors

Learn more about The Blog here:-https://brainly.com/question/19996854

#SPJ9

A boost chopper is powered by a 12-V DC power supply.

The output voltage range of this chopper if the duty cycle vary between 20 and 95% will be 15 - 240V

How to calculate the output voltage?

Output voltage can be calculated by the following formula:

[tex]V_0=\frac{V_i}{1-D}[/tex]

Here,

[tex]V_i[/tex] is the initial power supply.

D = Duty cycle

Calculating output voltage for 20%

[tex]V_0=\frac{12}{1-0.20} \\V_0=-\frac{12}{0.8} \\V_0=15[/tex]

Calculating output voltage for 95%

[tex]V_0=\frac{12}{1-0.95} \\V_0=-\frac{12}{0.05} \\V_0=240[/tex]

To learn more about output voltage, refer to:

brainly.com/question/20114686

#SPJ4

Answer:

strength or energy as an attribute of physical action or movement.

the frequency bandwidth in hz = 70,00,00,000 hz

1GHz = 1000MHz

Bandwidth = 1000mhz - 300mhz

Bandwidth = 700mhz

The frequency in hertz can be converted to hertz by multiplying by 1,000,000.

= 700 × 1000000

= 70,00,00,000 hz

Bandwidth of a channel is referred to as the range of frequencies available for transmission of data through that channel. It is the difference of maximum and minimum frequency contained in the composite signals.

To learn more about hertz, refer

https://brainly.in/question/4367373

#SPJ4

The car that starts from rest and travels 243 m in 7.86 s with constant acceleration has a velocity when it crosses the finish line of: 61.82 m/s

The formulas and procedures we will use to solve this exercise are:

Where:

Information about the problem:

Applying the acceleration formula we have:

a = 2 * [x - (vi * t)] / t²

a = 2 * [243 m - (0 m/s * 7.86 s)] / (7.86 s)²

a = 2 * [243 m - (0 m)] / 61.779 s²

a = 2 * [243 m] / 61.779 s²

a = 486 m/ 61.779 s²

a = 7.866 m/s²

Applying the final velocity formula we have:

vf = vi + (a * t)

vf = 0 m/s + (7.866 m/s² *7.86 s)

vf = 0 m/s + 61.82 m/s

vf = 61.82 m/s

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4