The product of [H₃O⁺] and [OH⁻] is calculated as1 × 10⁻¹⁴.
What is Kw?Ionization constant of water, Kw is the product of [H₃O⁺] and [OH⁻].In the autoionization of water, proton is transferred from one water molecule to another to produce hydronium ion (H₃O⁺) and hydroxide ion (OH⁻).
The equilibrium expression for the reaction is Kw = [H₃O⁺][OH⁻], where Kw is the autoionization constant of water.
As, Kw = [H₃O⁺][OH⁻]
In pure water, [H₃O⁺] = [OH⁻] = 1 × 10⁻⁷
So, Kw = [H₃O⁺][OH⁻] = 1 × 10⁻⁷ × 1 × 10⁻⁷
Thus, Kw = [H₃O⁺][OH⁻] = 1 × 10⁻¹⁴
Hence, we get the product of [H₃O⁺] and [OH⁻] is 1 × 10⁻¹⁴.
To know more about ionization constant of water, refer
https://brainly.com/question/14054598
#SPJ4
what should we do to reduce the risk when working with concentrated acids and bases ?
a) Never work with it b) Neutralize it c) Dilute them d) Work with large volumes
In order to reduce the risk while working with concentrated acids and bases, they need to be neutralized. Thus, for this question option B: "Neutralize it" is the correct answer.
Concentrated acids are the type of acids that contain a very large amount of acid in comparison to water in the solution. Concentrated acids have high numbers of available ions and a higher mass percentage in the solution. While a concentrated base is an aqueous solution that has a relatively high percentage of the base.
In order to reduce risks while handling concentrated acids and bases, they need to be neutralized with solid sodium bicarbonate.
You can learn more about concentrated acids at
brainly.com/question/28389583
#SPJ4
true or false? a carbon footprint is made up of the sum of two parts, the primary footprint (measure of direct emissions of co2) and the secondary footprint (measure of the indirect co2 emissions).
A carbon footprint is made up of the sum of two parts, the primary footprint (measure of direct emissions of co2) and the secondary footprint (measure of the indirect CO2 emissions). [TRUE]
About Carbon FootprintsCarbon footprint is the amount of carbon or greenhouse gases produced from various human activities in a certain period of time. The carbon footprint is an important instrument for measuring the contribution of individuals, communities, industries, products and others to climate change. By calculating the carbon footprint, an industry can find out the source of its emissions and can minimize its use from an early age.
Here are some sources that can create a carbon footprint:
Vehicle activityVehicle activity is known to cause a carbon footprint. This is due to the process of burning fuel in vehicles. The more use of fossil fuel vehicles, the more carbon emissions will be released into the air.
FoodProduction processes that occur in the agricultural, livestock and plantation sectors up to consumers are known to contribute 25% of greenhouse gas emissions to the world's total greenhouse gas emissions.
Use of Electrical EnergyThe use of electricity for daily life is also known to be a cause of gas emissions. This is because there are still many power plants that still use fossil fuels. So if you are not wise in using electricity, more gas emissions will be produced.
Learn more about Carbon footprint at https://brainly.com/question/1270740.
#SPJ4
A sample of a pure substance contains 7. 22 g of nickel, 2. 53 g phosphorus and 5. 25 g oxygen only. Determine the percent composition of phosphorus substance.
Answer:
It's not entirely clear whether your question is asking for the percent composition of phosphorus in the substance or the percent composition of all the elements in the substance that contains phosphorus. In either case, the percent composition of phosphorus in this substance is 16.9%.
The percent composition of all the elements in the substance is 48.1% nickel, 16.9% phosphorus, and 35.0% oxygen.
Explanation:
The percent composition of a substance in a sample can be found by dividing the mass of each element present in the sample by the total mass of the sample, and then multiplying by 100%.
To find the percent composition of the substance, we compute the total mass of the sample by adding the masses of all the elements present:
7.22 g + 2.53 g + 5.25 g = 15 g
Next, we divide the mass of each element by the total mass of the sample (15 g) and multiply by 100%.
Nickel: (7.22 g / 15 g) * 100% = 48.13%
Phosphorus: (2.53 g / 15 g) * 100% = 16.87%
Oxygen: (5.25 g / 15 g) * 100% = 35.00%
Given to three significant figures, the percent composition of the substance is: 48.1% nickel, 16.9% phosphorus and 35.0% oxygen.
Complete this Bronsted-Lowry reaction, placing each product by its appropriate label. HSO4^- + HBrO <=> ____ + ____
The bronsted-Lowry reactions is HSO, +HBrO= H,$O,+BrO,acid:H donor (H,SO,HBIO),base:H' receiver fHSO, where each product is positioned according to its appropriate label. BrO)
What in chemistry is Brnsted-Lowry?
According to the Brnsted-Lowry theory of bases and acids a Brnsted-Lowry base needs at least one single electron pair to take a proton and create a new connection with a proton. A proton is exchanged from such an acid to a base in an acid-base reaction, according to the Brnsted-Lowry definition.
What is a Lewis base versus a Brnsted-Lowry base?
A Brønsted - lowry bases is a chemical that can take a hydrogen ion, whereas a Brønsted - lowry acid can donate one. A Hamilton base is a chemical that can give up two electrons, whereas a Lewis acid can take in two electrons.
To know more about Bronsted-Lowry visit:
https://brainly.com/question/14407412
#SPJ4
if 250 ml of a 4.5 m stock solution of sulfuric acid is transferred to an empty flask, what volume of water in liters must be added to the flask to reduce the solution's molarity to 2.2 m?
This dilution issue makes use of the equation. MaVa=MbVb. The initial volumes are Va = 15.00 mL and Ma = 6.77M, respectively (concentration).
Describe what diluting is.This act of "adding extra additional solvent to a solution, including such water, to the solution, to decrease the amount of the solute in a solution," is known as dilution. A solution must be diluted by adding more solvent without introducing more solute.
What different types of dilution exist?Serial dilution is a frequent technique for attaining this concentration reduction. In homeopathy, diluting. Using the dilution equation, determine the rate of dilution of a gas. The use of a mark beyond its designated market without authorization is known as trademark dilution.
To know more about dilution visit:
brainly.com/question/28548168
#SPJ4
what is the relationship between the expected products of the reaction below? they are constitutional isomers they are diastereomers only one product is formed they are enantiomers
An epoxide will produce a product in which the epoxide were formed below a double bond and another product in which the ways . one way was formed below the doubled bond at the same time.
An epoxide functional group: what is it?
An epoxide is what? Many chemical compounds include the distinctive functional group known as an epoxide. The group has a 3 ring structure made up of two carbons and oxygen. Epoxides often have a low degree of stability because of the structure of three-membered ring structures.
What does the chemical term "epoxide" mean?
A cyclic ether known as an epoxide has a three-atom ring that closely resembles an equilateral triangle. When comparison to other ethers, these have a high level of reactivity. Two hydrocarbon carbon atoms joined to an oxygen atom make up the basic structure of an epoxide.
To knw more about epoxide visit:
https://brainly.com/question/26718813
#SPJ4
cerium (ce) and ytterbium (yb) are both group 3b metals that exhibit other oxidation states in addition to the expected 3 state. write the condensed electron configurations of ce2 , ce3 , and ce4 ..
cerium and europium, the principal formal oxidation state of these elements is trivalent.
What is called element?An element is a fundamental item that can't be easily broken into smaller pieces. In chemistry and physics, an element is a substance that can't be broken down by non-nuclear reactions. In computing and mathematics, an element is a distinct piece of a larger system or set.
What is element and example?Elements are the tiny particles that make up matter. Science describes an element as a pure substance made of only 1 type of atom that can not be broken down further into other substances. For example, hydrogen (H) and oxygen (O) are elements, but water (H2O) H 2 O ) which is made of hydrogen and oxygen is NOT.
To know more about element visit
https://brainly.com/question/14347616
#SPJ4
What particle is needed to complete the following nuclear equation? 23893np = ____ 0-1e
The following nuclear equation needs a particle to be complete: 23893np =56/26 Fe.
How is a nuclear equation written?The sign is accompanied by two numbers. The mass number, commonly referred to as the "A" number, is the number in the upper right. The "A" number identifies the number of protons and neutrons in the nucleus as well as the atomic weight of the given atom.
What is the equation for nuclear energy?there is a mass shift, m, as a result of nuclear fusion and nuclear fission. Energy E = mc2, where c is the speed of light, is created when mass is lost.
To know more about nuclear equation visit:
https://brainly.com/question/19752321
#SPJ4
A solid and a liquid are mixed in a test tube. which
of the following observations would indicate that a
chemical reaction occurred between them?
1. A gas is emitted when the mixture begins to fizz.
2. As the ingredients are combined, the test tube gets cooler
3. The combination turns a strong blue tint
The notion of emission gases is outlined above The objective of this example is to resolve the OPF problem in such a way that both FC and emission are concurrently reduced As the seas warm, they release gases, which is how the desired function is described Sunday TimesThe researchers determined the gass pressure and translated it to volumeThe ResearcherIt continued to release gasSunday Times, Times It has a large number of reddish galaxies that are encircled by gas that emits xrays taken from Wikipedia with a CC BYSA 3.0 license, available Flames that are higher up in the material heat it and release gases that selfignite proving the flashover idea
Learn more about A gas is emitted here:
https://brainly.com/question/12737906
#SPJ4
if 0.120 m hcl is slowly added to the naoh sample, in what ph range will the indicator change color?
If 0.120 m HCl is slowly added to the NaOH sample, then if the acidic solution increase greater than basic solution, the pH range indicator will change its color between 4.4 and 6.2 indicating red color.
Methyl red has a pKa value of 5. Consequently, between its pKa values of 4 and 6, it displays a colour change range of +/-1 pH unit. In acidic conditions, methyl red, an indicator dye, turns red. It serves as a pH indicator, turning yellow above pH 6.4 and orange between pH 4.4 and 6.2. An azo dye called methyl red is created from benzoic acid and a 2-positional 4-[(dimethylamino)phenyl]diazenyl group. It serves as a dye. It is a monocarboxylic acid, a tertiary amino compound, and a member of the azobenzene family.
To learn more about pH click here https://brainly.com/question/491373
#SPJ4
A student models convection currents in a laboratory activity. how are the convection currents in the student’s model different from the convection currents in earth’s atmosphere and oceans?
The warm air in Earth’s atmosphere and the warm water in Earth’s oceans sink instead of rise.
What exactly is the distinction between convection and convection current?The heat energy can be transported by convection by the temperature differential between the two portions of the fluid. Hot fluids tend to ascend due to the temperature differential, but cold fluids prefer to sink. This causes a convection current to form inside the fluid.
Differential heating causes convection currents. Warmer (less dense) stuff rises, whereas cooler (more dense) material sinks. This movement is responsible for the formation of circulation patterns known as convection currents in the Earth’s atmosphere, ocean, and mantle.
To learn more about convection to refer:
https://brainly.com/question/4138428
#SPJ4
The continuity equation indicates that the speed of a fluid flowing through a pipe will change when the cross-sectional area of the pipe changes. Which of the following assumptions justify the use of the continuity equation? Select two answers.
The fluid has uniform pressure everywhere.
The fluid can be modeled as an ideal gas.
The mass flow rate is constant.
The fluid is incompressible.
The use of the continuity equation is justified by the following assumptions:
The mass flow rate is constant.The fluid is incompressible.A continuity equation, also known as a transport equation, is an equation that explains the transfer of a substance. It is especially easy and effective when used to a conserved amount, but it may be extended to apply to any vast quantity. Because mass, energy, momentum, electric charge, as well as other natural quantities remain conserved under their respective proper circumstances, a wide range of physical processes may be explained using continuity equations.
Continuity equations represent a more powerful, localised variant of conservation rules. For example, a weakened form of the law of conservation of energy asserts that energy cannot be generated or destroyed, implying that the total quantity of energy in the cosmos is fixed. This statement does not exclude the possibility of an amount of energy disappearing from one spot while arriving at another.
To know more about the Continuity equation, here
https://brainly.com/question/29103113
#SPJ4
Element x forms three different compounds with element y. Information about these compounds is contained in the table. Compound formula mass of y per gram of x 1 xy6 2. 82 g 2 xy? 1. 41 g 3 xy? 0. 94 g what are the formulas of compounds 2 and 3? replace each question mark with the appropriate integer
The formulae of compounds 2 and 3 is XY₂ and XY₃.
What is compound?A chemical compound is a substance made of numerous identical molecules joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule composed entirely of one element's atoms is not a compound. a material made up of two or more different elements joined chemically. Compounds include things like water (H2O), which is created from the elements hydrogen and oxygen, and table salt (NaCl), which is created from the elements sodium and chloride. A substance made up of two or more constituents is called a compound. Water, carbon dioxide, and table salt are examples of compounds.
Here,
The formulae of compounds 2 and 3:
Compound 1: XY6 (2.82g)
Compound 2: XY? (1.41g)
Compound 3: XY? (0.94g)
Compound 1: 2.82/6 = 0.47
Compound 2: 1.41/0.47 = 2
Compound 3: 0.94/0.47 = 3
Compounds 2 and 3 have the following formulas as XY₂ and XY₃.
To know more about compound,
https://brainly.com/question/13516179
#SPJ4
Calculate ΔG∘rxn at 298 K for the following reaction:I2(g)+Cl2(g)⇌2ICl(g),Kp=81.9
Express the free energy of the reaction in kilojoules to three significant figures.
I2(g)+Cl2(g)2ICl(g),Kp=81.9 equals 1.091 x 104 J/mol. A system's energy-like property of state function when it is in thermodynamic equilibrium. Free energy shares the same dimensions as other forms of energy, yet unlike other forms of energy, its worth depends on the current condition of the system rather than its past.
How do you define free energy?Free and Gibbs free energy G, which differs from the overall energy change in a chemical reaction, is the amount of energy in a system that can be used to carry out useful work.
What makes free energy so called?Due of its simplicity and accessibility at all times, Gibb free energy is also known as free energy. If necessary, this energy can be provided to the reaction without any effort on its part. The product of the system's temperature and entropy, added together with the system's enthalpy, determines the change of Gibb's free energy.
To know more about free energy visit:
https://brainly.com/question/15319033
#SPJ4
the teachers added about 40 - 50 mL of ice water to the round container. The container is made of 1/8 inch thick cast iron. A lid was put on the container and tightened. The round cast iron container is placed in a metal dish that contains about 200 mL of a dry ice and acetone
what's the claim,evidence and reasoning for it
Answer:
Claim: The round cast iron container filled with ice water and sealed with a lid will maintain its temperature for a certain period of time.
Evidence: The container is made of 1/8 inch thick cast iron and the lid is tightened to prevent heat loss. The container is placed in a metal dish that contains dry ice and acetone which will help to decrease the temperature inside the container.
Reasoning: The cast iron container is a good insulator which means it will slow down the transfer of heat from the inside to the outside. The lid will help to prevent heat loss through convection. The dry ice and acetone in the metal dish will provide a cooling effect to the container, which will help to keep the temperature inside the container low for a longer period of time. The combination of insulation and cooling will help to maintain the low temperature inside the container for a certain period of time.
The police found 70 grams of NaCl (salt) in the room. To kill somebody with acid, you
would need at least 60 grams of HCI (acid). Is there enough salt to prove that Albert
killed the butler with acid?
HCl + NaOH → NaCl + H2O
Clue: Police found 70 grams of NaCl in the room. Convert grams of NaCl (salt) into grams
of HCl (acid) to see if there was enough acid to murder the butler.
70 grams of NaCl (salt) were discovered by the police in the room. There is sufficient salt to demonstrate that Albert used acid to kill the butler.
From the given reaction we have as:
HCl + NaOH → NaCl + H2O
Here by comparing the moles of reactants and products we have 1 mole of HCl reacting with 1 mole of NaOH to give 1 mole of NaCl and H2O.
So, we can say that the mole ratio of NaOH: NaCl: HCl = 1 : 1 : 1
The molecular weight of HCl is 37g
The molecular weight of NaOH is 40g
The molecular weight of NaCl is 59g
In 70g of NaCl there are = 70 / 59 = 1.186 moles of NaCl
If we consider 60g of HCl there are = 60/37 = 1.62 moles of HCl
Here we can see that NaCl acts as limiting reagent and only 1.18 moles of HCl reacts with NaOH.
So, to find the mass of 1.18 moles of HCl = 1.18 x 37 = 43.66g
So, the required amount of HCl to kill the butler is 43.66g. So, there is enough salt to prove that Albert killed the butler with acid.
To learn more about HCl click here https://brainly.com/question/29204122
#SPJ4
3. These two samples of NaCl and CoCl₂ have the same number of moles. Do they
have the same mass? Do they have the same number of particles? Explain.
No, These two samples of NaCl and CoCl₂ will not have the same mass but they do have the same number of particles
What is the relationship between number of particles and moles ?One mole of a substance is equal to 6.022 × 10²³ units of that substance (such as atoms, molecules, or ions). The number 6.022 × 10²³ is known as Avogadro's number or Avogadro's constant. The concept of the mole can be used to convert between mass and number of particles.
The molecules can be expressed in units of grams, milligrams or even moles. Example,O2,SO42−,CH4 etc. Hence, the difference between moles and molecules is that a mole is a quantity of 6.022×1023 particles, while a molecule contains various atoms of elements bonded chemically.
Learn more about Moles here:
https://brainly.com/question/15356425
#SPJ1
the mass percent of carbon in pure glucose, c6h12o6, is 40.0 percent. a chemist analyzes an impure sample of glucose and determines that the mass percent of carbon is 38.2 percent. which of the following impurities could account for the low mass percent of carbon in the sample? select one: a. ribose, c5h10o5 b. water, h2o c. sucrose, c12h22o11 d. fructose, c6h12o6, an isomer of glucose
The carbon mass percent in pure glucose, c6h12o6, is 40.0 percent. A chemist analyses an impure specimen of carbohydrates and defines that the carbon mass percent is 38.2 percent.. Option B - H20 ,water impurities could account for the low mass percent of carbon .
Impurities refer to unwanted substances present in a sample of a pure substance. They can be present in trace amounts or in larger quantities and can affect the properties or performance of the pure substance. Mass percent, also known as weight percent, is a way to express the concentration of a component in a mixture. It is calculated by dividing the mass of the component of interest by the total mass of the mixture, and then multiplying by 100. The resulting number represents the percentage of the total mass that is made up of the component of interest. For example, in the case of glucose, the mass percent of carbon is 40.0% because 40 grams of carbon are present in every 100 grams of glucose.
Learn more about mass percent here:
https://brainly.com/question/15461083
#SPJ4
An aerosol spray can with a volume of 250 mL contains 2.30 g of propane gas C3H8 as a propellant. If the can is at 25deg C, what is the pressure in the can? What volume would the propane occupy at STP? The can says that exposure to temperatures above 130 deg F may cause the can to burst. What is the pressure in the can at this temperature? (three questions in total)
propane amount. The molar mass of an inert gas is 22.4 E n at standard conditions, or 273.15 K и 1 atom.
What is the LPG gas' volume?The most common cooking propane canister size in India is a 14.2 kg LPG container with a capacity of around 27.8 litres. To account for ullage, an LPG cylinder's contents in litres is deemed full at 80%. Ullage seems to be the empty space in the cap of the LPG cylinder that allows room for the gas vapour to expand. The basic formula measuring volume is length, breadth, and height, as opposed to length, width, and height for the rectangle of a rectangular shape.
How do you determine the STP volume occupied?standard pressure and temperature (STP) At STP, the 8 moles of Hydrogen will have their largest volume. As a result, choice (A), 8 moles of H, is the right one. Note: As a result, standard molar volume is defined as the pressure created by 1 mole of every gas at STP.
To know more about propane visit :
https://brainly.com/question/11697104
#SPJ4
Which one of these elements is likely to form exactly three non-ionic interactions with hydrogen?.
Nitrogen is one of the element that is likely to form three ionic interaction with hydrogen to form ammonia (NH3).
The element that is most likely to interact with hydrogen in exactly three covalent ways is nitrogen. This substance is necessary for life. The importance of nitrogen and hydrogen for life Since nitrogen is significantly more electronegative than hydrogen, their covalent bonds are polar.
Only molecules with covalent bonds between hydrogen and either fluorine, oxygen, or nitrogen experience hydrogen bonding. The majority of the electron density in the covalent bond with hydrogen is removed by these three extremely electronegative elements, leaving the hydrogen atom with a very low electron density.
Because it is a component of DNA and RNA, nitrogen is essential for life.
Another important component of amino acids in proteins is nitrogen.
To learn more about covalent click here:
https://brainly.com/question/7052399
#SPJ4
A pure titanium cube has an edge length of 2.81 inches.
how many titanium atoms does it contain? titanium has a density of 4.50g/cm3.
N = ?
A pure titanium cube has an edge length of 2.81 inches. The titanium atoms does it contain with titanium has a density of 4.50g/cm3 is 2.0 × 10²⁵ atoms.
Given that :
The edge length = 2.81 inches = 7.1 cm
V = (7.1)³ = 357.9 cm³
m = V ×d
m = 357.9 × 4.50
m = 1610.55 g
The moles = mass / molar mass
= 1610.55 / 47.87
= 33.6 mol
The titanium atoms = 33.6 × 6.022 × 10²³
= 2.0 × 10²⁵ atoms
Thus, the number of the titanium atoms with edge length of the 2.81 inches is 2.0 × 10²⁵ atoms.
To learn more about atoms here
https://brainly.com/question/5290571
#SPJ4
after drawing the best lewis structures for so32-, so42-, and so2, place them in order of bond length from shortest to longest?
Bond order, as we know, is inversely related to bond length. Bond length decreases when bond order increases and vice versa. Increasing order of bond length will be SO2<SO42-<SO32-.
Sulphur dioxide has the lowest bond length, whereas sulphite ion does have the longest. Bond order is really the number of electron bonding pairs that exist between two atoms. A single bond has a bond order of one in a covalent bond between two atoms, a double bond does have a bond order of two, a triple bond does have a bond order of three, and on and on. Bond length and bond order are connected; when more electrons engage in bond formation, the bond is shorter. Bond length is often inversely linked to bond strength and bond dissociation energy, thus a stronger bond would be shorter if all other conditions are equal. Half the bond distance between two similar atoms equals the covalent radius.
Bond lengths typically measured inside the solid phase using X-ray diffraction, and in the gas phase using microwave spectroscopy. A bond between a particular pair of atoms might differ amongst molecules. Methane, for example, has different carbon-hydrogen bonds than methyl chloride. However, generalizations are conceivable when the overall structure remains the same.
To know more about the Bond order, here
https://brainly.com/question/29853110
#SPJ4
which of the following is an example of synthesizing information? (required)making connections between the history of housing policies and current housing trends.applying knowledge of basic chemistry from an introductory course towards understanding information in an advanced organic chemistry classing to a conclusion about candidates running for election based on reading multiple viewpoints on their platforms.
An example of synthesizing information is applying knowledge of basic chemistry from an introductory course towards understanding information in an advanced organic chemistry.
What happens when information is combined?When you synthesise knowledge, you take particular ideas and take them into account collectively to comprehend how they compare, contrast, and relate to one another. Students can get information from several sources and put it all together by synthesising it. When these sources are merged, a single, coherent concept is produced. This is the normal method used in class to teach students new concepts, theories, and knowledge.
What is an illustration of information synthesis?Making connections or putting things together is all that is required. We instinctively combine information to assist others in making connections between various concepts. Synthesis occurs, for instance, when you tell a friend what a number of other friends have remarked about a music or movie.
Learn more about organic chemistry here:
brainly.com/question/14623424
#SPJ4
What is the empirical formula of the compound: C7H4O2?
a.C14H8O4
b.C3H2O2
c.C7H4O2
Answer:
Explanation: it's right
For each of the following IR spectra, identify whether it is consistent with the structure of an alcohol, a carboxylic acid, or neither.• Alcohol • Carboxylic acid • Neither
Identifying the functional group of a molecule from an IR spectrum requires knowledge and experience in interpreting the spectra. However, I can tell you that some general features that can help differentiate alcohols, carboxylic acids, and other functional groups in IR spectra are:
Alcohols:
Typically have a broad and strong absorption in the 3200-3600 cm-1 region, which is due to the stretching vibration of the hydroxyl (-OH) group.
Carboxylic acids:
Carboxylic acids typically have a strong absorption in the 1700-1750 cm-1 region, which is due to the stretching vibration of the carbonyl (-C=O) group.
Carboxylic acids also have an absorption in the ~1200-1300 cm-1 region, which is due to the bending vibration of the carboxyl (-COOH) group
It is important to note that these are general guidelines, and that the exact position and shape of the absorption bands may vary depending on the specific compound and the environment in which it is in.
Additionally, other functional groups may also have similar absorption bands, so it is important to consider other information (such as the chemical structure) when interpreting an IR spectrum.
To know more about IR spectra refer to:
brainly.com/question/14724107
#SPJ4
the ocean stores carbon from its interactions with the atmosphere, so the ocean serves as (a) for the carbon cycle.(1 point) responses carbon sink carbon sink carbon dioxide carbon dioxide carbon flux carbon flux carbon source
The ocean stores carbon out of its interactions with atmosphere, therefore the ocean serves even though carbon sink for the carbon cycle.
What uses does carbon serve?Metal melting makes use of impurity carbon in the forms of coke derived from coal and charcoal generated from wood. It is crucial for the steel and iron industries in particularly. Graphite is utilized in furnaces liners, electric motor brushes, and pencils. Activated charcoal is employed in filtering and purification processes.
Do people require carbon?Without carbon, life on earth wouldn't be conceivable. This is partly because carbon can easily make bonds to other atoms, allowing biomolecules like RNA and DNA which are crucial for life, to have a variety of shapes and functions.
To know more about carbon visit :
https://brainly.com/question/3049557
#SPJ4
16. what factor would you use to convert the empirical formula of a compound to a molecular formula?
The empirical formula of a substance would be transformed into a molecular formula using Molar Mass.
The empirical formula of a chemical compound in chemistry is the simplest whole number ratio of atoms in a compound. A chemical formula identifies each component element by its chemical symbol and the proportion of atoms that make up each element. Calculate the compound's molar mass by deducting the empirical formula mass. The result must be a whole number or very close to one. You need to know a compound's molar mass or molecular mass in order to convert its empirical formula into a molecular formula.
Learn more about Empirical Formula
brainly.com/question/11588623
#SPJ4
a mixture of copper sulfate and water is heated, leaving a residue of copper sulfate in the container. which method was used to separate the mixture?
Evaporation was the process used to separate the copper sulfate and water.
What kind of residue is that, exactly?Anything that remains after a substance has already been removed is called a residue, such as the fat on a frying pan. Additionally, it can simply mean "remainder." Remaining liquid in a bottle, pot, or container after rest has been drained out is referred to as residue.
Chromatography is a separation technique used in labs. The mobile phase or the stationary phase are the two phases of this method.
Mobile phases include both the phase within which the mixture dissolves and the phase that acts as either a carrier through system, such as a sheet or capillary is termed as mobile phase.
The process of evaporation involves using heat to remove dissolved particles from liquid. Heat causes liquid to evaporate, leaving behind the solid. Insoluble particles are removed from the liquid through the process of filtration, which involves permitting it to pass through some kind of porous material like filter paper A method for separating a mixture of liquids having various boiling points is distillation. From this, we might infer that evaporation was the process utilized to separate the salt solution and water mixture.
To know more about Residue visit :
https://brainly.com/question/16794270
#SPJ4
The Complete Question :
A mixture of copper sulfate and water is heated, leaving a residue of copper sulfate in the container. Which method was used to separate the mixture?
A. chromatography
B. evaporation
C. filtration
D. distillation
For parts of the free-response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. HCl(aq)+NaOH(aq)?NaCl(aq)+H2O(l) A student was given the task of titrating a 20.mL sample of 0.10MHCl(aq) with 0.10MNaOH(aq) . The HCl(aq) was placed in an Erlenmeyer flask. An equation for the reaction that occurs during the titration is given above. (a) According to the equation for the reaction, if the amount of the reactants is halved, how does this affect the amount of H2O(l) produced in the reaction?
Answer: Answer: If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will also be halved.
Explanation: The balanced equation for the reaction between HCl(aq) and NaOH(aq) is:
HCl(aq) + NaOH(aq) --> NaCl(aq) + H2O(l)
From this equation, it is clear that for every 1 mole of HCl(aq) and 1 mole of NaOH(aq) that react, 1 mole of H2O(l) is produced.
If the amount of reactants is halved, the amount of H2O(l) produced will also be halved, because the ratio of reactants to products is 1:1.
So, in the case of 20.mL of 0.10MHCl(aq) + 0.10MNaOH(aq) , the amount of H2O(l) produced is 20.mL x 0.10M = 2.00x10^-3mol.
If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will be 1.00x10^-3mol.
larity if 11 g cacl2 are dissolved in one liter of solution? ... of all ions present in .0200 mole of sodium phosphate in 10.0 ml of solution?
The molarity of 11 g of CaCl2 dissolved in one liter of solution is 0.20 M. The molarity of 0.0200 mole of sodium phosphate in 10.0 ml of solution is 2.00 M.
What is molarity?A measurement of a solution's concentration is its molarity. The concentration of a solution can be determined by measuring the mass of the solute and the volume of the solution. Molarity is a useful measure when trying to understand how much of a solute is present in a given volume of solution. It can be used to compare the strength of different solutions, and also to calculate how much solute is required for a given volume. Molarity is an important concept in chemistry and is used in many areas of science.
To learn more about molarity
https://brainly.com/question/14469428
#SPJ4
