For steady flow in an atmospheric heat exchanger, calculate the
heat transferred if 900 mol/min of SO2 is heated from 225 to 1200
C. Take the heat capacity to be a function of temperature.

Answers

Answer 1

The question states that we are required to calculate the heat transferred in steady flow in an atmospheric heat exchanger when 900 mol/min of SO2 is heated from 225 to 1200 C.

ΔT = T2 - T1 = (1200 - 225) = 975 KNext, we will find out the heat capacity of the gas:q = (nCpΔT)whereq

= heat transferredn = number of molesCp = heat capacity at constant pressure

ΔT = change in temperatureWe are given that the heat capacity is a function of temperature, thus we will use the following formula to calculate the heat capacity of the gas:

To find a, b, and c, we need to use the following two data points:Cp (225 C) = 30.3 J/mol KCp (1200 C) = 50.6 J/mol KUsing these data points:a + b(225) + c(225)^2 = 30.3 (Equation 1)a + b(1200) + c(1200)^2 = 50.6 (Equation 2)

[tex]Cp = 2.13 + 0.057T + 4.67 × 10^-5T^2[/tex]Substituting the values in the given formula of q, we get:q = (900 mol/min)(2.13 J/mol [tex]K + 0.057(T1 + ΔT/2) + 4.67 × 10^-5(T1 + ΔT/2)^2)(975)[/tex]where T1 is the initial temperature of the gas (225 C).Substituting the values in the above equation, we get:q = 7.57 × 10^7 J/minHence, the heat transferred is 7.57 × 10^7 J/min.

To know more about question visit:

https://brainly.com/question/31278601

#SPJ11


Related Questions

Consider the code given below. Show exactly what will be printed on the screen. #include #include #include #include int_y=3; void child(); void parent (); void main() {int m=9, n=10; Rid id; int p1(2), p2 [2]; pipe (pl); pipe (p2); id=fork(); if(id) {printf("we have a problem... now exiting.. \n"); exit(1); } if(id) child(p1, p2, m, n); else parent (p1, p2, min); } void child(int *pl, int *p2, int a, int b) {char h[30]; v=Y+1; if(a>b) sprintf (h,"<1> ame); else sprintf(h,"<1> d", b); write(p1[1Lhasizeof(h)); read(p2[0], hasizest (h)); printf(" $3\n... exiting); } void parent(int *pl, int *p2, a) {char bb[40]; y=y+2; read (p1[01bbsizeof(bb)); printf(" $3\nbb); sprintf(bb,"<2> "*v); write (p2[1],bb sizeof(bb)); } Output on the screen:

Answers

The output of the code will be "we have a problem... now exiting.."

How is this so?

This is because the line if(id) {printf("we have a problem... now exiting.. \n"); exit(1); } is executed when id is not equal to 0, which means it is the parent process. The parent process prints the message and then exits with status code 1.

Note that the rest of the code   after the exit(1) statement will not be executed.

Output in programming   refers to the result or information generated by a program that isdisplayed or produced as a response to a specific input or computation.

Learn more about  code;
https://brainly.com/question/26134656
#SPJ4

If you keep an eye on the nightly news, you are well aware of the frequency with which secury becaches make beadlines Clearly, information security practitioners are light ing an uphill battle due to the volume of attacks that target companies, universities, and even government organi tions. A common misconception is that the bulk of security threats organizations face are introduced by nefarious hack ers or cybercriminals sponsored by longo governments. How ever, a recoal security analysis conducted by PwC reported that insiders, third-party suppliers and contractors po increasingly serious threat." In short, many of the securty threats plaguing organisations today originate from within the company for within its partner networks. The Weakest Link This trend is due to the relative case with which people can be manipulated and compromised. Hackers olen resort to exploiting people's desire to be friendly and help others rather than exploring vulnerabilities in handware or software. This concept is often referred to as social engineering of the process of manipulating individuals to access secure systems, pain confidential information, or violate the integrity systems While social engineering presents a clear threat to nizational information security it can also be highly effective in other contexts in which people feel pressured and make rash decisions. In fact, social engineering has introduced a number of new threats into the fried world of Investing in cryptocurrencies. Social Engineers Striking It Rich The world of cryptocurrencies has evolved rapidly and it recently reached the tipping point of becoming mainstream with the surge in value of Bitcoin. All types of people See finance gurus, tech investors, and savvy high school students have succumbed to their speculative side and tried to get rich quick from this trend. However, the world of cryptocurrency is complex. Due to its immaturity, there are virtually no con trols or regulatory mechanisms to place to protect the people (DELL) participating in this market. In light of the frantic interest in tiers associated with cryptocurrency: the technical buying, selling or misingi and the lack of any set of ripe for exploitation by social engineers For example, some scammers are targeting cryptocur rency mining equipment Ortacurm miting is the proc of validating recent cryptocurrency tremactions and distrib uting the updated "lenger to all of the devices associated with that cryptocurrency's network. In tam for performing this miners can receive a payment in that cryptocur rency for a permotage of the transaction's value Bat mining rogaires an extremely powerful system or gre of systems, which may be inleasible for a single individual to purchase and manage Social engineers have begun scam ming people to investing in mining equipment that does not exid, convincing victims to contribute the idle computing power of their eystems to mine ryptocurrencies but never them for their contribution, and soliciting would-be toboy radulent hardware (that is not as powerful as sed) for use in n Another cryptocurricy som currently involves selling people cryptocurcles that do not actually exist. Bitcoin is certainly high-profile cryptocurrency market, but there has been al coin ellerings (CO) in which new currencies are introduced. In fact, in the first quarter of My Stock Phot 2018, there were 101 ICOS.57 Additionally, there have been more than 300 ICOs since the value of Bitcoin witnessed sub- stantial gains in 2017.58 With all of this activity, it can be extremely difficult to keep track of and verify which currencies are legitimate and which have any sort of investment value. The market is so murky that ? DISCUSSION QUESTIONS 1. Why might an insider pose a greater threat to an inter- nal secure system than an outside attacker? How could an insider be a weak link? 2. What is social engineering? How could attackers use social engineering to compromise a secure internal system? SECURITY GUIDE Social Engineering Bitcoin 367 even some financial institutions have been duped.99 The best way to participate in the cryptocurrency gold rush is to use best practices that apply to general financial transactions. Always use common sense, verify the parties that are involved in the trans- action, avoid investment opportunities that sound too good to be true, and, when in doubt, do not hesitate to do more research! 3. What is cryptocurrency mining? How does it generate money? 4. How would attackers use social engineering to scam users into mining?

Answers

The Insider Threat: Insider poses a greater threat to an internal secure system because of their familiarity with the company's security protocols, weaknesses, and the systems they use on a daily basis.

An outside attacker is usually not familiar with these processes and systems, and they have to conduct research and reconnaissance to gain knowledge on how to infiltrate a network.

An insider knows where sensitive information is stored, and they are aware of the access controls to those resources, making it easier for them to bypass security measures. An insider could be a weak link if they are careless with their login credentials, fall victim to social engineering, or intentionally create a security vulnerability in a network.

Social Engineering: Social engineering is the practice of manipulating individuals into divulging sensitive information, granting unauthorized access, or compromising a secure system. Attackers use social engineering to compromise a secure internal system by targeting employees with phishing emails, phone calls, or social media messages that appear legitimate.

Social engineering attacks exploit human emotions like curiosity, greed, fear, and kindness to trick people into disclosing confidential information or clicking on malicious links. For instance, attackers may craft an email that appears to be from a company executive requesting the recipient to provide their login credentials. An unsuspecting employee may provide their credentials, and attackers will use them to gain access to sensitive company data or networks.

Cryptocurrency Mining: Cryptocurrency mining is the process of verifying cryptocurrency transactions and adding them to a blockchain, a public ledger of all transactions conducted in a particular cryptocurrency network. The process involves solving complex mathematical problems to validate and add transactions to the blockchain. Miners receive a payment in the cryptocurrency they are mining for every transaction they validate.

Attackers can use social engineering to scam users into mining by convincing them to invest in mining equipment that does not exist or soliciting fraudulent hardware. Attackers may also trick people into contributing the idle computing power of their devices to mine cryptocurrencies without rewarding them for their contribution. Additionally, some attackers sell people cryptocurrencies that do not exist, leading to financial losses.

To know more about security protocols, refer

https://brainly.com/question/31167906

#SPJ11

Write a C program that asks the user for the dimensions of a matrix. The program sends the dimensions to the function generateMatrix( ) where a random matrix with the entered dimensions is generated. The program then asks the user to choose between row and column. The functions sumRow( ) and sumColumn( ) finds the chosen row or column’s sum and returns the value.
Sample Run:
Enter the number of rows and columns: 3 4 Randomly generated matrix:
34 12 23 96
13 75 67 29
43 38 56 83
For the sum of a row press R, for the sum of a column press C: R Which row?: 3
Sum of the 3rd row is: 220

Answers

Here is the C program that asks the user for the dimensions of a matrix. The program sends the dimensions to the function generateMatrix() where a random matrix with the entered dimensions is generated. The program then asks the user to choose between row and column.

The functions sumRow() and sumColumn() finds the chosen row or column’s sum and returns the value.

#include #include #include int generateMatrix(int m, int n);

int sumRow(int m, int n, int a[m][n], int r);

int sumColumn(int m, int n, int a[m][n], int c);

int main(){int m, n;

printf("Enter the number of rows and columns: ");

scanf("%d %d", &m, &n);

int a[m][n];

generateMatrix(m, n, a);

char choice;

int r;

printf("For the sum of a row press R, for the sum of a column press C: ");

scanf(" %c", &choice);

if (choice == 'R' || choice == 'r')

{printf("Which row?: ");

scanf("%d", &r);

printf("Sum of the %d row is: %d", r, sumRow(m, n, a, r));}

else if (choice == 'C' || choice == 'c')

{printf("Which column?: ");

scanf("%d", &r);

printf("Sum of the %d column is: %d", r, sumColumn(m, n, a, r));}

else{printf("Invalid choice!");

return 1;}

return 0;}

int generateMatrix(int m, int n, int a[m][n]){srand(time(NULL));

for(int i = 0; i < m; i++)

{for(int j = 0; j < n; j++)

{a[i][j] = rand() % 100;

printf("%d ", a[i][j]);}

printf("\n");}}

int sumRow(int m, int n, int a[m][n], int r){int sum = 0;

for(int i = 0; i < n; i++)

{sum += a[r-1][i];}

return sum;}

int sumColumn(int m, int n, int a[m][n], int c){int sum = 0;

for(int i = 0; i < m; i++)

{sum += a[i][c-1];}

return sum;

}

To know more about program visit:
https://brainly.com/question/30613605

#SPJ11

Generate Randome Variables and Compute Empirical Distributions We will start with generating some data samples with a given distribution. For the following two PMFs, Task 1: Generate 1000 samples from PMF1, and 500 samples from PMF2. You can either write your own random sample generator by using the inverse CDF approach we talked about in class, or use the np.random.choice() function. Task 2: Write a function compareHIST (D,p), where D is an 1-D array of data samples, and p is a valid PMF. Compute and plot the empirical distribution of D using matplotlib.pyplot.hist () , and plot p against it in the same plot for comparison. Task 3: Mix the two datasets generated in Task 1 into an array of 1500 samples. Compute the ensemble distribution of this mixture from PMF1 and PMF2, and compare that with the empirical distribution of the mixed dataset, by using the compareHIST() function in Task 2 .

Answers

To complete the tasks, we'll first generate the samples from the given PMFs using NumPy's random.choice function. Then, we'll define the compareHIST function to compute and plot the empirical distribution of a dataset along with a given PMF.

Task 1:To generate 1000 samples from PMF1, we will use the `np.random.choice()` function. The `p` parameter will be used to represent the probability distribution that we want to generate the samples from. To generate 1000 samples from PMF1, we will use the following code: import numpy as np

# PMF 1p1 = np.array([0.1, 0.2, 0.3, 0.4])# generate 1000 samples from PMF1 samples1 = np.random.choice(a=[1, 2, 3, 4], size=1000, p=p1). To generate 500 samples from PMF2, we will use the same `np.random.choice()` function, but with a different probability distribution. To generate 500 samples from PMF2, we will use the following code:

# PMF 2p2 = np.array([0.4, 0.3, 0.2, 0.1])# generate 500 samples from PMF2 samples2 = np.random.choice(a=[1, 2, 3, 4], size=500, p=p2)

Task 2:To compare the empirical distribution of a dataset `D` with a given PMF `p`, we will use the `matplotlib.pyplot.hist()` function. We will also plot `p` against the empirical distribution of `D` for comparison. To do this, we will write the following function:import matplotlib.pyplot as pltdef compare HIST(D, p):    

plt.hist(D, density=True, alpha=0.5)    plt.plot(np.arange(1, len(p)+1), p, 'ro-', lw=2)    plt.xlabel('x')    plt.ylabel('Frequency')    plt.legend(['PMF', 'Empirical'])    plt.show()

Task 3:To mix the two datasets generated in Task 1 into an array of 1500 samples, we will use the `np.concatenate()` function. Then, we will compute the ensemble distribution of this mixture from PMF1 and PMF2 by adding the probabilities of each value in the two PMFs. To compare that with the empirical distribution of the mixed dataset, we will use the `compareHIST()` function we defined in Task 2.

To do this, we will use the following code:samples3 = np.concatenate((samples1, samples2))# ensemble distribution of this mixture from PMF1 and PMF2p_mix = p1 + p2# normalize the distributionp_mix = p_mix / np.sum(p_mix)# compare the empirical distribution of the mixed dataset with p_mixcompareHIST(samples3, p_mix)

To know more about Empirical Distribution visit:

https://brainly.com/question/31668492

#SPJ11

Assuming Base and Derived classes are designed appropriately, and basePtr and derivedPur are pointing to objects of their respective classes, which of the following lines of code will result in slicing? a. derivedPtr = basePtr b. basePtr = derivedPtr c. *derivedPtr = *basePtr d. *basePtr = *derivedPtr (3 pts) Given two classes, Car and Person, we should understand that a Person might have multiple cars and cars can transfer between People. How would you model this relationship? a. Inheritance b. Polymorphism c. A Car object inside the Person class d. A Person pointer inside the Car class

Answers

We can use *Option C* (i.e. A Car object inside the Person class) to create a Car object inside the Person class to indicate that a person can have multiple cars. However, *Option D* (i.e. A Person pointer inside the Car class) will not be appropriate in this scenario.

Assuming Base and Derived classes are designed appropriately, and basePtr and derivedPur are pointing to objects of their respective classes,

*Option C* (i.e. *derived Ptr = *basePtr*) will result in slicing.

When a derived class object is assigned to a base class object, the additional attributes of a derived class object get sliced off (i.e. removed) and only the attributes of the base class object are retained.

This is known as object slicing. Here, the object of the derived class is assigned to a pointer of the base class, resulting in slicing.

Given two classes, Car and Person, a Person might have multiple cars, and cars can transfer between People. To model this relationship, we can use

*Option A* (i.e. Inheritance) by defining the Car class as the base class and the Person class as the derived class.

The class Car will have all the properties of a Car object, and the Person class will inherit those properties.

Additionally, we can use *Option C* (i.e. A Car object inside the Person class) to create a Car object inside the Person class to indicate that a person can have multiple cars. However, *Option D* (i.e. A Person pointer inside the Car class) will not be appropriate in this scenario.

To know more about Person pointer visit:

https://brainly.com/question/32317843

#SPJ11

A baseband signal consists of a square wave with amplitude -1 V and + 1 V and a period of 0.5 milliseconds (f=2 kHz). The square wave modulates a 10 V peak carrier wave at a frequency of 5 kHz. (Carrier wave is v(t) = cos 10 10³ t.) The resulting FM wave it sent over a short twisted pair wire link to a receiver. The transmitter has a modulation constant of 1 kHz per volt. a. What is the peak frequency deviation of the carrier? b. What is the bandwidth required to transmit the FM wave according to Carson's rule? Hint: Since the modulating signal is a square wave, consider taking the 5th harmonic of the square wave as a reasonable upper limit for fmax (i.e. fmax is the highest frequency in the modulating signal).

Answers

(a) Given:A baseband signal consists of a square wave with amplitude -1 V and + 1 V and a period of 0.5 milliseconds (f=2 kHz). The square wave modulates a 10 V peak carrier wave at a frequency of 5 kHz. (Carrier wave is v(t) = cos 10 10³ t.)The frequency of the carrier wave is f = 5 kHz, and the amplitude is 10 V.

Modulation constant is given as kf = 1 kHz/V. To find: Peak frequency deviation of the carrier wave. Formula to be used:∆f = kf * m, where m is the message signal and kf is the modulation constant. By analyzing the modulating signal and the carrier wave, we can see that the carrier wave has a peak frequency deviation of
∆f1= 1 kHz * 1 V = 1 kHz.
The peak frequency deviation of the carrier wave is 1 kHz.
To find: Bandwidth required to transmit the FM wave according to Carson's rule. Formula to be used:Bandwidth (BW) = 2(∆f + fmax)where ∆f is the peak frequency deviation of the carrier wave, and fmax is the highest frequency in the modulating signal. Here, fmax is taken as the 5th harmonic of the modulating signal's frequency.
∴ fmax = 5 × 2 kHz = 10 kHz.
So, the bandwidth required to transmit the FM wave according to Carson's rule is
BW = 2 (1 kHz + 10 kHz) = 22 kHz. Hence, the answer is Bandwidth required to transmit the FM wave according to Carson's rule is 22 kHz.

to know more about square wave visit:

brainly.com/question/31723356

#SPJ11

Consider three LANs interconnected by two routers, as shown in Figure 6.33.
a. Assign IP addresses to all of the interfaces. For Subnet 1 use
addresses of the form 192.168.1.xxx; for Subnet 2 uses addresses of
the form 192.168.2.xxx; and for Subnet 3 use addresses of the form
192.168.3.xxx.
b. Assign MAC addresses to all of the adapters.
c. Consider sending an IP datagram from Host E to Host B. Suppose all of
the ARP tables are up to date. Enumerate all the steps, as done for the
single-router example in Section 6.4.1.
d. Repeat (c), now assuming that the ARP table in the sending host is empty
(and the other tables are up to date).

Answers

Consider three LANs interconnected by two routers as shown in figure 6.33:a. The IP addresses assigned to all of the interfaces are given below:For Subnet 1 use addresses of the form 192.168.1.xxxFor Subnet 2 use addresses of the form 192.168.2.

xxxFor Subnet 3 use addresses of the form 192.168.3.xxxb. The MAC addresses assigned to all of the adapters are given below:MAC Address of Adapter 1: 00:01:02:3F:2F:32MAC Address of Adapter 2: 00:01:2E:AB:CD:BCMAC Address of Adapter 3: 00:01:34:56:78:9Cc. Steps to send an IP datagram from Host E to Host B are as follows:Step 1: Host E examines its routing table to determine that the IP datagram needs to be sent to the IP address of Router 1's interface on subnet 0.

Router 2 receives the Ethernet frame from Router 1 and checks its ARP table. The ARP table indicates that the MAC address of Host B's interface on subnet 1 is not present.Step 15: Router 2 sends an ARP request message to all hosts on subnet 1 asking for the MAC address of Host B's interface on subnet 1.Step 16: Host B receives the ARP request message from Router 2 and sends an ARP reply message to Router 2 with its MAC address.

To know more about addresses visit:
https://brainly.com/question/30038929

#SPJ11

What is the impact of REST's Uniform Interface on the overall REST architectural style?

Answers

REST (Representational State Transfer) has emerged as the most popular architectural style for web services. REST has six guiding constraints, of which the Uniform Interface constraint is the primary. The Uniform Interface constraint of REST defines the standardization of interfaces that separates clients from servers.

The standardization of interfaces simplifies and decouples the architecture, which improves the overall architectural style. REST's Uniform Interface has a significant impact on the overall REST architectural style.

Uniform Interface:

The Uniform Interface is the primary constraint of the REST architectural style. It refers to the standardization of interfaces that separate clients from servers. RESTful web services utilize standard HTTP verbs such as GET, POST, PUT, and DELETE to manage and manipulate resources. The Uniform Interface constraint promotes standardization and decoupling, enabling client-server communication to evolve independently of one another. As a result, the architecture is simplified, and coupling is minimized, making it easier to maintain and modify.

Impact of Uniform Interface:

The Uniform Interface constraint has a significant impact on the overall REST architectural style. It enables the separation of concerns between clients and servers, making it easier to evolve each component independently. It encourages the standardization of interfaces, reducing the need for custom coding, and promoting interoperability. The Uniform Interface constraint also promotes scalability by enabling caching and by reducing the processing load on servers.

The Uniform Interface constraint of REST is the primary guiding constraint and has a significant impact on the overall REST architectural style. It promotes standardization and decoupling, enabling clients and servers to evolve independently of each other. By promoting standardization, it reduces the need for custom coding and increases interoperability. It also enables caching and reduces server processing loads, making it easier to scale the architecture. Overall, the Uniform Interface constraint is essential for the success of RESTful web services.

To know more about scalability  :

brainly.com/question/13260501

#SPJ11

Describes the stakeholders and for each of these the related requirements. Requirements can be defined using textual requirements, use cases, (architectural) scenarios, prototype(s), state transition diagrams (if necessary) for ATM system.

Answers

Stakeholders are the groups of individuals that have an interest in a project or organization and are impacted by its actions and results.

The stakeholders for the ATM system include the following:1. Customers - Individuals that will use the ATM to perform banking transactions. The requirements for this group include: The ATM should be easy to use with clear instructions. The system should be secure, and the customer's transaction information should be kept private.2. Bank management - Individuals responsible for managing the bank and ensuring that the ATM system meets the needs of the bank and its customers. The requirements for this group include: The system should be cost-effective, reliable, and efficient. It should be easy to maintain and update.3. Technical staff - Individuals responsible for installing, configuring, and maintaining the ATM system. The requirements for this group include: The system should be easy to install and configure, and there should be clear documentation available. The system should be reliable and easy to troubleshoot.4. Security personnel - Individuals responsible for ensuring that the ATM system is secure and protected from fraud and theft. The requirements for this group include: The system should be designed with security in mind. There should be multiple layers of security, such as PINs, biometrics, and cameras. The system should be regularly updated to address new security threats.

In conclusion, the stakeholders of the ATM system include customers, bank management, technical staff, and security personnel. Each group has unique requirements that must be considered during the design and implementation of the system. The requirements can be defined using various methods, including textual requirements, use cases, architectural scenarios, prototypes, and state transition diagrams. By understanding the needs of each group, the ATM system can be designed to meet the needs of all stakeholders.

To know more about Stakeholders visit:

brainly.com/question/30241824

#SPJ11

Describe the logic (not formatting) issue(s) with this code snippet: int planet = 4; switch(planet) { case 0: printf("The Sunin"); break; case 1: printf("Mercuryin"); break; case 2: printf("Venus\n"); case 3: printf("Earth\n"); break; case 4: printf("Marsın"); break; case 5: printf("Jupiter\n"); case 6: Cummin VULSIVIS REIVIAINING case 3: printf("Earthin"); break; case 4: printf("Mars\n"); break; case 5 printf("Jupiterin"); case 6: printf("Saturnin"); continue; case 7: printf("Uranus\n"); break; case 9: printf("Neptunein": default: printf("invalid planet %d\n", planet); >

Answers

The code snippet is for displaying the planet name based on the planet number.The first logical error is that the case 2 for Venus doesn't have a break statement, it will fall through to the next case statement.The second logical error is that the case 6 does not have a break statement, it has a "continue" statement.

This is a wrong statement to use because it can cause an infinite loop.The third logical error is the presence of the two cases with the same value. The switch statement is for testing a value, it is important that each case statement is different from each other. Duplicate cases are prohibited in the switch statement.The fourth logical error is the use of an invalid character in the code "Marsın". The character "ı" is not a valid character in the printf statement, this will cause an error message to appear. Therefore, the printf statement should be changed to "Mars\n".The fifth logical error is that the planet number 9 is invalid.

The case statement that should have been for 8 is missing and 9 has no name. It is an out-of-range value and the default message should be printed in its place.

To know more about code snippet visit:

https://brainly.com/question/30471072

#SPJ11

Convert the following to decimal. (1.5 points) a. 11010110₂ b. 2708 c. B10B16

Answers

In order to convert a binary number to decimal number, use the following steps:Write down the binary number.Multiply each digit of the binary number with the power of 2 that corresponds to the position of that digit, starting from the rightmost digit.

The first digit from the right represents 2⁰, the second digit represents 2¹, the third digit represents 2², and so on.Add all the results obtained in step 2 to get the decimal equivalent of the binary number.Therefore, to convert the binary number 11010110₂ to decimal, use the following stepsTo convert from base 8 to base 10, we multiply each digit by its corresponding power of 8 and sum the results. For example, the number 2708 is in base 8, which means it has the digits 2, 7, and 0, from left to right.

To convert this number to base 10, . For example, the number B10B16 is in base 16, which means it has the digits B, 1, 0, and B, from left to right. However, since the letters A, B, C, D, E, and F are used in base 16 to represent values greater than 9, we must convert them to their decimal equivalents before we can perform the multiplication. The decimal equivalents of A, B, and C are 10, 11, and 12, respectively.

To know more about convert visit:

https://brainly.com/question/32248688

#SPJ11

A 5.0 MHz magnetic field travels in a fluid in which the propagation velocity is 1.0x108 m/sec. Initially, we have H(0,0)=2.0 a. A/m. The amplitude drops to 1.0 A/m after the wave travels 5.0 meters in the y direction. Find the general expression of this wave. Select one: O a. H(y,t)=2e-014/cos( m10't-0.2my) a, A/m b. H(y.t)-le-014cos(2n10ºt-0.1my) a, A/m Oc H(y.t)=2e-0.14/cos(n10't - 0.1my) a, A/m Od. None of these

Answers

Given,The frequency of the magnetic field, f = 5 MHz = 5 × 106 HzVelocity of the fluid, v = 1.0 × 108 m/sInitial amplitude, H(0,0) = 2.0 A/mFinal amplitude, H(0,5) = 1.0 A/m

Therefore, decay constant, α = [ln(H(0,0)/H(0,5))]/5 = [ln(2/1)]/5 = 0.1386m-1
Let's find the wavelength first. The wavelength of the wave is given as,
λ = v/f = 1.0 × 108/5 × 106 = 20 m
The general expression of the magnetic field H(y,t) can be given by,
H(y,t) = H0cos(ky - ωt) where,H0 = maximum amplitude ky = wave vector ω = angular frequency = 2πf = 2π × 5 × 106 = 31.42 × 106 s-1k = 2π/λ = 2π/20 = 0.3142 m-1
Putting the values of H0, k, and ω, we getH(y,t) = 2cos(0.3142y - 31.42 × 106t)

Hence, the general expression of the given wave is H(y,t) = 2cos(0.3142y - 31.42 × 106t).

to know more about magnetic field visit:

brainly.com/question/30331791

#SPJ11

Consider three programs: p1, p2, and p3. Ben runs pi by mistake in the foreground and takes his lunch break. He comes back and it is still running. He needs to run program p2 without losing all the work that p1 has done so far. a) Show the sequence of commands that Ben needs to execute to run p2 in the foreground without killing p1: b) After running p2 he takes a coffee break. When he comes back, p2 is still running. He needs to run p3 without killing p2. He puts p2 in the background, and launches p3 in the background. Show the sequence of commands that Ben needs to run to accomplish this: c) After a while, Ben checks on the three processes. All three are still running. He brings p2 to the foreground and puts it back into the background. Show the sequence of commands to accomplish this. d) After a while, Ben checks on the three processes. All three are still running. He remembers that he made a mistake in coding program pl. He wants to kill it. Show the sequence of commands to accomplish this.

Answers

a) To run program p2 without losing all the work that p1 has done so far, Ben needs to execute the following sequence of commands:First, press `CTRL + Z` to stop p1 and get back to the shell. Then, enter the command `bg` to send p1 to the background. Finally, enter the command `./p2` to run program p2 in the foreground.

b) To run p3 without killing p2, Ben needs to put p2 in the background and launch p3 in the background. Here's the sequence of commands to accomplish this:First, press `CTRL + Z` to stop p2 and get back to the shell.Then, enter the command `bg` to send p2 to the background. Finally, enter the command `./p3 &` to launch p3 in the background.c) If all three processes are still running and Ben wants to bring p2 to the foreground and then put it back into the background, he needs to execute the following sequence of commands:First, enter the command `jobs` to get a list of the jobs currently running.Then, enter the command `fg %1` to bring p1 to the foreground.If Ben wants to put it back in the background, he can enter the command `bg %1`.d).

If Ben remembers that he made a mistake in coding program pl and wants to kill it, he can use the `kill` command to accomplish this. Here's the sequence of commands to accomplish this:First, enter the command `ps` to get a list of all running processes.Then, find the PID (process ID) of program p1 from the output of the `ps` command.Enter the command `kill PID` to kill the process.

To know more about sequence visit:

https://brainly.com/question/30262438

#SPJ11

Select the correct name to fill in to each of the scenarios:
The class Item is considered a(n) [ Select ] ["Ancestor", "Descendant", "Override", "Polymorphism", "Subclass", "Superclass"] of the class Shake.
The class ChickenBurger is a(n) [ Select ] ["Ancestor", "Descendant", "Override", "Polymorphism", "Subclass", "Superclass"] of the class Item.
The class Employee is a(n) [ Select ] ["Ancestor", "Descendant", "Override", "Polymorphism", "Subclass", "Superclass"] of class Manager.
The class BeefBurger is a(n) [ Select ] ["Ancestor", "Descendant", "Override", "Polymorphism", "Subclass", "Superclass"] of class Burger.
The class Item and the class Fries both have a method named cost(). This is called [ Select ] ["Ancestor", "Descendant", "Override", "Polymorphism", "Subclass", "Superclass"] .
The method cost() of class Soda is said to [ Select ] ["Ancestor", "Descendant", "Override", "Polymorphism", "Subclass", "Superclass"] the method cost() in class Beverage.

Answers

The class Item is considered a(n) [Superclass] of the class Shake. The class Chicken Burger is a(n) [Subclass] of the class .

The class Employee is a(n) [Superclass] of class Manager .The class Beef Burger is a(n) [Subclass] of class Burger.The class Item and the class Fries both have a method named cost(). This is called [Polymorphism].The method cost() of class Soda is said to [Override] the method cost() in class Beverage. Explanation:Superclass - This term refers to a class that's used as a base class by other classes. The class that inherits properties and methods from a superclass is known as a subclass.

This term is used to describe a class that inherits properties and methods from another class. A class can be a superclass or a subclass based on how it is used in the code.Override - This term refers to a subclass method that replaces the superclass method with the same name, return type, and parameters. Overriding is required when subclassing to maintain the same behavior as the superclass.Polymorphism - Polymorphism is a concept in object-oriented programming that allows code to be more flexible and dynamic. It is the ability to create a variable, an object, or a method that can assume multiple forms.

To know more about class Shake visit:

https://brainly.com/question/16722225

#SPJ11

Simplify the following Boolean expressions, using three-variable maps, • F(X, Y, Z) = XY+YZ+ Y Z • F(X, Y, Z) = X YZ + X Y Z + XY Z

Answers

A Boolean algebra is used to study logical relationships, which are governed by operators and certain rules. Boolean algebra is used in digital electronics, among other things, to create circuits that generate a binary number in response to a given input.

The operations in Boolean algebra are based on two values, true and false, and are referred to as logical AND, OR, and NOT. It can be used to simplify complex logical expressions using a Karnaugh map.Using three-variable maps, let's simplify the following Boolean expressions:•

F(X, Y, Z) = XY+YZ+ Y ZThe K-map for F(X, Y, Z)

Therefore, F(X, Y, Z) = XY+YZ+ Y Z= Y(X + Z) + YZ= Y(X + Z + Z) = Y(X + Z).• F(X, Y, Z) = X YZ + X Y Z + XY ZThe K-map for F(X, Y, Z)

Therefore, F(X, Y, Z) = X YZ + X Y Z + XY Z= X Y(Z + ) + XY(Z + )= XY(Z + ) = X Y Z.

Hence, the simplified expressions are F(X, Y, Z) = Y(X + Z) and F(X, Y, Z) = X Y Z.

To know more about relationships visit:

https://brainly.com/question/14309670

#SPJ11

Write a program to create a structure with name person. The structure should
take the name, father’s name, age, blood group as input. The user should take
the input using pointers and print the elements in the structure using pointers.
solve in c using function and pointer only

Answers

Here is the solution to your problem with the required terms: To create a structure with the name 'person', one can use the following code: struct person { char name[30]; char fathers_name[30]; int age; char blood_group[10];};The above code declares a structure with four elements, i.e., 'name', 'father's_name', 'age', and 'blood_group'.

These four elements can be initialized using pointers, and we can use another pointer to print them out.Let's write a C program to take the user's input using pointers and print the elements in the structure using pointers.```
#include
#include

struct person {
   char name[30];
   char fathers_name[30];
   int age;
   char blood_group[10];
};

void get_input(struct person *p) {
   printf("Enter Name: ");
   scanf("%s", p->name);

   printf("Enter Father's Name: ");
   scanf("%s", p->fathers_name);

   printf("Enter Age: ");
   scanf("%d", &p->age);

   printf("Enter Blood Group: ");
   scanf("%s", p->blood_group);
}

void print_output(struct person *p) {
   printf("Name: %s\n", p->name);
   printf("Father's Name: %s\n", p->fathers_name);
   printf("Age: %d\n", p->age);
   printf("Blood Group: %s\n", p->blood_group);
}

int main() {
   struct person p;
   struct person *ptr = &p;

   get_input(ptr);

   printf("\nPerson Details:\n");
   print_output(ptr);

   return 0;
}

To know more about problem visit:

https://brainly.com/question/31611375

#SPJ11

Use the following interests to answer the questions below for the routing problem: T(0) = 5 T(1) = 3 TT (2) = 2 T(3) = 1 T(4) = 6 T(5) = 7 TT (6) = 4 TT (7) = 0 Find a Beneš Network for the routing problem above. Give your conflict graph colorings. What is the diameter of this network? What is the congestion of this network? How many switches experience this congestion?

Answers

The Beneš Network is a system of interconnections for communicating with many processors. A Beneš network of a given size can be used to route messages among the processors with good performance in terms of latency and bandwidth. The Beneš network is a type of network that can be used to link nodes together.

In the routing problem, the Beneš network is used to connect processors so that they can communicate. The conflict graph colorings for the Beneš network can be found by considering each node in the network. The node's connections to other nodes will determine the colors that are used in the coloring. If a node has two connections to other nodes, then two different colors will be used for those connections.

If a node has three connections, then three colors will be used. If a node has four connections, then four colors will be used. The diameter of a network is the longest shortest path between any two nodes in the network.

In the routing problem, the diameter of the Beneš network can be found by finding the shortest path between each pair of nodes and then selecting the longest one.

The congestion of the network is 3. Only one switch experiences this congestion.

To know more about interconnections visit:

https://brainly.com/question/30579807

#SPJ11

Outline any THREE constructional differences between the single-value capacitor motor and the capacitor-start motor 1 (c) Starting from the torque equation T=0x² (S-S[sin 20+ sin 20 cos2or]of a Dax 4 singly-excited motor, displaced at angle 0=0,1-8, where the symbols have their usual meanings, explain why a single-phase induction motor is non-self-starting, but a single-phase synchronous motor is self-starting.

Answers

The differences between the single-value capacitor motor and the capacitor-start motor are as follows: Single-value capacitor motors are also known as single-phase motors.

The construction of the single-phase capacitor motor is similar to that of the three-phase induction motor. The only difference is the absence of a second winding. The capacitor motor's working principle is that of a two-phase motor, which causes it to have lower starting torque.

Capacitor-start motor: A capacitor-start motor has two windings: a main winding and a secondary winding. The primary winding is directly connected to the power supply, whereas the secondary winding is connected to a capacitor. This type of motor is more powerful and has a higher starting torque than the single-value capacitor motor. A centrifugal switch disconnects the auxiliary winding once the motor has reached a specific speed, allowing it to operate as a single-phase induction motor. This motor is used in larger appliances such as air compressors, pumps, and refrigerators.

The starting torque of a single-phase induction motor is T=0x² (S-S[sin 20+ sin 20 cos2or]). The motor is non-self-starting due to the fact that it has only one phase, which creates a rotating magnetic field with zero torque. As a result, the motor cannot generate enough torque to start rotating.A single-phase synchronous motor, on the other hand, is self-starting. The motor can start rotating as a result of the stator's rotating magnetic field, which is produced by the AC source voltage. When the rotor rotates, it creates a magnetic field that is locked in synchronism with the stator's magnetic field. The motor will continue to operate as long as the frequency of the source voltage matches the motor's synchronous speed.

In summary, single-phase induction motors are non-self-starting due to the lack of torque produced by the rotating magnetic field. In contrast, single-phase synchronous motors are self-starting due to the magnetic field produced by the rotor's rotation being locked in synchronism with the stator's magnetic field. The differences between the single-value capacitor motor and the capacitor-start motor include the presence of a secondary winding and higher starting torque in the capacitor-start motor.

Learn more about capacitor motor visit:

brainly.com/question/32811418

#SPJ11

Calculate the number of bits used for actual data and overhead (i.e., tag, valid bit, dirty bit) for each of the following caches A. Direct-mapped, cache capacity = 64 cache line, cache line size = 8-byte, word size = 4-byte, write strategy: write through B. Fully-associative, cache capacity= 256 cache line, cache line size = 16-byte, word size = 4-byte, write strategy: write back C. 4-way set-associative, cache capacity = 4096 cache line, cache line size = 64-byte, word size = 4-byte, write strategy: write back D. How the cache line size affect the overhead?

Answers

Direct-mapped Cache Capacity of cache = 64 cache line Cache line size = 8 bytes Word size = 4 bytes

Write strategy: write through In direct-mapped cache, the tag and valid bit is used to determine whether the contents of a given cache line match a given memory block.

The dirty bit is not required because write through write strategy writes the data to both cache and memory. Now, we can calculate the actual data and overhead. The address in the cache contains 64 lines, and we have 2k (where k = 6) blocks per line.

Thus, the total bits used for actual data = 4 * 256 * 4 * 8 = 26,2144 bit C. 4-way set-associative Cache Capacity of cache = 4096 cache lines Cache line size = 64 bytesWord size = 4 bytes

Write strategy: write backIn 4-way set-associative cache, each set contains 4 cache lines, and each line contains a block of memory from the same memory .

However, a larger cache line reduces the miss rate because the cache line stores more words from the same memory set. Hence, there is a trade-off between overhead and cache performance, and the optimal cache line size is determined by the memory access pattern.

To know more about Direct visit :

https://brainly.com/question/32471459

#SPJ11

Which of the following expression is equivalent to (x > 1). a. X >= 1 b. x <= 1) c. (x = 1) d. !(x< 1) e. None of the above

Answers

\Option (a) `X >= 1` is equivalent to the expression `(x > 1)`.

Inequality is a mathematical expression that describes the relation between two values, usually indicating that one is greater than the other or that they are not equal to each other.

Inequalities may also use the symbols for less than, greater than, less than or equal to, or greater than or equal to.To understand the equivalent expression,

we first have to learn what each expression represents and how they work. The expression `(x > 1)` tells us that x is greater than 1.

Therefore, `x >= 1` means that x is greater than or equal to 1 and therefore is equivalent to the given expression `(x > 1)`.Option (a) `X >= 1` is equivalent to the expression `(x > 1)`.

Option (a) is the correct answer since `X >= 1` is equivalent to `(x > 1)`.

To know more about relation visit:

brainly.com/question/31111483

#SPJ11

An unpipelined processor takes 6 ns to work on one instruction. It then takes 0.1 ns to latch its results into latches. When we convert the circuits into 4 sequential pipeline stages, the stages have the following lengths: 0.7ns; 1.3ns; 1.4ns; 0.9ns. Assuming that there are no stalls in the pipeline, what is the cycle time in the unpipelined and pipelined processors? O Unpipelined = 6 ns, Pipelined = 1.4 ns Unpipelined =6.1 ns, Pipelined = 1.5 ns O Unpipelined =6 ns, Pipelined = 1.5 ns Unpipelined =6.1 ns, Pipelined = 1.1 ns Unpipelined =6 ns, Pipelined = 1 ns None of the above -AA1992

Answers

Given data :An unpipelined processor takes 6 ns to work on one instruction. It then takes 0.1 ns to latch its results into latches.

When we convert the circuits into 4 sequential pipeline stages, the stages have the following lengths: 0.7ns; 1.3ns; 1.4ns; 0.9ns. Assuming that there are no stalls in the pipeline, we need to calculate the cycle time in the unpipelined and pipelined processors.In an unpipelined processor, the cycle time is the time needed to execute one instruction. As given, the time taken to execute one instruction is 6 ns. Hence the cycle time is 6 ns.In a pipelined processor, the cycle time is the time needed to execute one stage. There are four stages in the pipeline, and the lengths of the stages are given as: 0.7ns; 1.3ns; 1.4ns; 0.9ns. The cycle time of the pipelined processor is given by the maximum length of all the stages. Hence the cycle time is 1.4 ns.

Therefore, the correct option is Unpipelined =6 ns, Pipelined = 1.4 ns

To know more about latches visit :

https://brainly.com/question/31827968

#SPJ11

Simplify the following Boolean functions, using four-variable maps, . F(A,B,C,D)=(2, 3, 6, 7, 12, 13, 14) F(A,B,C,D)=(0, 2, 4, 5, 6, 7, 8, 10, 13, 15)

Answers

In Boolean algebra, a boolean function is an arithmetic function that operates on binary values, i.e., it uses logic gates to perform binary operations on one or more binary inputs and provides binary output. The four-variable maps in Boolean algebra are used to simplify Boolean functions by mapping them to Truth tables.

The Boolean functions F(A,B,C,D)=(2, 3, 6, 7, 12, 13, 14) and F(A,B,C,D)=(0, 2, 4, 5, 6, 7, 8, 10, 13, 15) can be simplified using the four-variable maps as shown below: For the Boolean function F(A,B,C,D)=(2, 3, 6, 7, 12, 13, 14)Truth table:0000 0 0010 1 0100 0 0110 1 1000 0 1010 1 1100 1 1110 1

By looking at the table, we can notice that the minterms 2, 3, 6, 7, 12, 13, and 14 are 1's in the Truth table. Therefore, we can construct a map with 2 rows and 4 columns as shown below: AB/CD 00 01 11 10 00 0 1 X X 01 0 1 X X 11 X X 1 0 10 X X 1 0 From the above map, we can obtain the simplified Boolean function as:

F(A,B,C,D) = (A'C'D) + (ACD') + (AB'C') + (ABC')For the Boolean function F(A,B,C,D)=(0, 2, 4, 5, 6, 7, 8, 10, 13, 15)Truth table:0000 1 0010 0 0100 1 0110 0 1000 1 1010 0 1100 0 1110 0

From the Truth table, we can notice that the min terms 0, 2, 4, 5, 6, 7, 8, 10, 13, and 15 are 1's.

To know more about Boolean visit:

https://brainly.com/question/27892600

#SPJ11

Sweetpeas.ca is Toronto’s eco & socially responsible floral design studio, and widely recognized as Toronto's Best Florist. They are known for innovative and elegant floral arrangements in a wide range of styles. Importantly, it is a floral studio and not a retail store. It is closed to the public and orders must be made either through their website or by phone. They offer same-day delivery for orders placed before 11am. The average price of an arrangement, including delivery, is $91 plus tax. The gross margin after cost of flowers sold is 60%. They pay more than the living wage for Toronto ($25 per hour for their floral arrangers and delivery people). They also source their flowers ethically and limit use of plastics in their arrangements.
They own a fleet of eight electric vans that they use to deliver the flowers throughout the GTA. Starting at 8AM the van drivers depart with 10 to 20 orders, typically taking 2-3 hours to make their deliveries and return to reload for the next delivery tour. To ensure that the customers enjoy their flowers as much as possible, the last delivery van departs at 3pm.
Orders that arrive after 11am, if completed by before 3pm, may be sent out the same day, but no promise is made to do so. Orders that are completed after 3pm are held in their large walk-in refrigerator and sent out the next day.
A big challenge for Sweetpeas is the variability of orders and staffing to meet the orders. A simple flower arrangement in a vase might take 10 minutes to put together, while an extensive piece might take 30 minutes or more. The time to process an order is 20 minutes on average and is given by a gamma distribution with parameters (a=4, b=5); here the parameterization implies the mean = ab and the std. dev. = b√a.
Currently there are 8 flower arrangers who work at Sweetpeas from 7am until 3pm, and 5 other flower arrangers who work from 11 am until 7pm. (For simplicity, assume they can eat lunch while working.) There are on average 20 orders placed through the website each hour from 7am until 7pm. The total number of orders placed each night between 7pm and 7am is on average 50 with a standard deviation of 7.07. (Assume there is no weekly cyclical pattern, only the daily one.)
[5 pts] Suppose on Monday, 7am, there are 100 unprocessed orders. How many unprocessed orders would you expect there to be at 11am? How many unprocessed orders would you expect at 3pm?
[5 pts] Suppose on Tuesday at 3pm there are no unprocessed orders. How many unprocessed orders would you expect Wednesday morning at 7am (i.e., the next morning)? How many unprocessed orders would you expect Wednesday at 3pm?
[5 pts] Sweetpeas gets nervous about making their service promise if all orders received by 11am have not been started in production by 2pm so that they can be loaded and shipped by 3pm. Suppose at 11am on Thursday there are 100 unprocessed orders. What is the likelihood that Sweetpeas will not be able to start processing all 100 orders by 2pm? That is, should Sweetpeas be nervous Thursday at 11am?
[15 pts] Describe your expectations on the daily operations. What is the workload of the flower arrangers? How does it ebb and flow? How busy are they? Are there too many or too few flower arrangers? Do they have time for lunch? What is the workload of the van drivers? Are their sufficient vans? Are they scheduled well? Should Sweetpeas be nervous about meeting their service promise consistently?
[5 pts] The marketing manager at Sweetpeas is considering changing the promise to same day delivery if ordered by 2pm. They think this will increase demand by 5 units each hour from 7am to 2pm. Comment on the ability of Sweetpeas to support this promise. How might this message affect how customers interact with the firm and how would you address any change? What changes, if any, would you suggest to the operation to support this promise?

Answers

Suppose on Monday, 7 am, there are 100 unprocessed orders. The time to process an order is 20 minutes on average, given by a gamma distribution with parameters (a=4, b=5).

There are eight flower arrangers from 7 am until 3 pm and five other flower arrangers from 11 am until 7 pm.There are on average 20 orders placed through the website each hour from 7 am until 7 pm.Mean= ab = 4 × 5 = 20Variance= b² a = 5² 4 = 100Mean of the sum of n gamma distributions with mean μ and variance σ² is nμ and nσ². Therefore, we may assume the total processing time to be normally distributed with mean 20*100 = 2000 minutes and variance 100*100 = 10000 minutes.

Therefore, Sweetpeas should not be nervous on Thursday at 11 am.[15 pts] Describe your expectations on the daily operations.The average number of orders placed per hour is 20, and the average time to process an order is 20 minutes, implying that there is a need for one arranger per order.

To know more about orders visit:

https://brainly.com/question/31801586

#SPJ11

Assignment Brief and Guidance Delivato is an international courier company well known as the most reliable delivery company in the world. A large number of high-profile business entrust Delivato to deliver their goods including Banks to deliver Credit cards, Ecommerce business to deliver goods of all types including high value electronics and governmental agencies like hospitals and embassies to deliver medication and documents respectively. Customers are offered online service to track their shipments, and request pickups. They can also pay for their shipments online. Delivato Datacenter is located in UK. They have branches in Europe, Middle east, Africa and US. As a standard, each branch will have a warehouse that processes physical shipments using a conveyer system that sorts shipments by area. Besides, there is the office area where HR. Account, IT and Management sit, next to a computer room that processes local shares, print servers and connectivity with UK datacenter to access the Main tracking system and accounting application: Last there is a warehouse for items storage, with in/out requests received by customers to be delivered to their outlets. Delivato is planning to move their main tracking application to the cloud in a hybrid model architecture (some other applications will be still hosted on premise). However, they are having security concerns around the move of apps and data under a cloud provider after being hosted on premise for a long time. You are hired by the management of Delivato as Information Security Risk Officer to evaluate the security- related specifics of its present system and provide recommendations on security and reliability related improvements of its present system as well as to plan the move to the cloud. Part of your responsibilities is to ensure the confidentiality, integrity, and availability (CIA) of the data and related services. You did a security check on most of the applications, systems, policies & procedures, and devices and noticed the following: 1- Not all existing devices (endpoints) within the offices are well secured. 2- One subnet is used for all devices in all monitoring stations. 3- Data processed by conveyer system (related to the shipments) in each branch well be uploaded to the system on the cloud via Internet connection and will be stored there in a database server for analysis and reporting. The transmission of data is done through a published web application over the Internet (front-end back-end architecture). Such information should be highly secured since it is considered of customer privacy and protected by law and regulations. 4- Customers are able to create profiles on an online tracking system hosted on premise and to be moved on the cloud. Such profile contains some personal and private information that should not be disclosed to other parties. 5- When you checked the current data centre as well as the warehouse in each branch, you noticed that the door is easily opened. So, shipments, servers and networking devices are easily accessed by anyone. You also noticed that the humidity and temperature inside the servers' room are not well controlled. 6- Some employees have VPN access to the data center to run some applications remotely. 7- Some other third parties are granted VPN access for support reasons, like the companies that provided and installed the conveyer system. 8- Very minor security procedures taken by Delivato as well as some misconfigurations on some network security devices like firewalls and VPN. Your manager asked you to prepare a detailed report and a presentation regarding IT security for Delivato services and environment in general. The report is to be submitted to and discussed with the CEO to get approval for further security policy enforcement. In your report you should: A. Discuss IT security risks that might put the customers' and Delivato's data into danger, taking into consideration all data situations (being entered, transmitted, processed, and stored). Your discussion should include:

Answers

Delivato is an international courier company, known as the most reliable delivery company in the world. They are planning to move their main tracking application to the cloud in a hybrid model architecture.

However, they are having security concerns around the move of apps and data under a cloud provider after being hosted on premise for a long time. So, the management of Delivato hired an Information Security Risk Officer to evaluate the security-related specifics of their present system and provide recommendations on security and reliability related improvements of its present system as well as to plan the move to the cloud. Part of his responsibilities is to ensure the confidentiality, integrity, and availability (CIA) of the data and related services.The IT security risks that might put the customers' and Delivato's data into danger are as follows:1. Non-secured endpoints: Not all existing devices (endpoints) within the offices are well secured.2. Same subnet for all monitoring stations: One subnet is used for all devices in all monitoring stations. This means that if any device in this subnet gets compromised, then all devices will be at risk

.3. Insecure transmission: Data processed by the conveyor system (related to the shipments) in each branch will be uploaded to the system on the cloud via an Internet connection and will be stored there in a database server for analysis and reporting. The transmission of data is done through a published web application over the Internet (front-end back-end architecture). Such information should be highly secured since it is considered customer privacy and protected by law and regulations.4. Unsecured customer profile: Customers are able to create profiles on an online tracking system hosted on premise and to be moved on the cloud. Such a profile contains some personal and private information that should not be disclosed to other parties.5. Lack of physical security: When the current data center and warehouse in each branch were checked, it was noticed that the door is easily opened. So, shipments, servers, and networking devices are easily accessed by anyone. Humidity and temperature inside the server's room are not well controlled.6. Unauthorized access: Some employees have VPN access to the data center to run some applications remotely.7. Third-party access: Some other third parties are granted VPN access for support reasons, like the companies that provided and installed the conveyor system.8. Lack of security procedures and misconfiguration: Very minor security procedures were taken by Delivato as well as some misconfigurations on some network security devices like firewalls and VPN.

To know more about tracking application visit:

https://brainly.com/question/32006038

#SPJ11

Delivato, being an international courier company, deals with different kinds of data, ranging from customers’ private data to business data. The company operates with a lot of partners and stakeholders, all of whom require access to the data to some extent.

However, without proper IT security protocols, these data and services could be put into danger.The following are some of the IT security risks that might put the customers' and Delivato's data into danger:1. Endpoints are not well securedNot all existing devices (endpoints) within the offices are well secured. This makes the data within these devices vulnerable to cyberattacks. It is important to secure these devices as they can be used as entry points for hackers to gain access to the company’s network.2. Unsecured subnetOne subnet is used for all devices in all monitoring stations. This makes it easier for hackers to gain access to the company’s network, as they can use one entry point to compromise all systems.3.

Insecure web applicationThe data processed by the conveyer system, related to the shipments, in each branch will be uploaded to the system on the cloud via an internet connection. The transmission of data is done through a published web application over the internet (front-end back-end architecture). The information should be highly secured since it is considered customer privacy and protected by law and regulations. The web application should be secured using encryption and other security measures to prevent unauthorized access to the data.4. Insecure customer profilesCustomers are able to create profiles on an online tracking system hosted on-premise and to be moved to the cloud. Such profile contains some personal and private information that should not be disclosed to other parties.

To know more about stakeholders visit:

https://brainly.com/question/29532080

#SPJ11

Consider a 2-block fully associative cache. The following blocks from main memory are accessed which need to be mapped to cache: P, Q, P, R. Which block is replaced from the cache when the last block (block R) is accessed? Assume FIFO replacement policy.

Answers

The 2-block fully associative cache with FIFO replacement policy replaces the oldest accessed block when a new block is accessed.

In a fully associative cache, any block from main memory can be mapped to any cache block. The cache size determines the number of blocks it can hold. In this case, the cache has a capacity of 2 blocks.

When the blocks P, Q, P, and R are accessed sequentially, they are mapped to cache blocks. As the cache is fully associative, all blocks can be stored in any cache block. Assuming a FIFO replacement policy, the oldest accessed block will be replaced when a new block is accessed.

Therefore, when block R is accessed, it will replace the oldest block that was accessed previously, which is block P in this case.

The last accessed block (block R) replaces the oldest block (block P) in the 2-block fully associative cache with FIFO replacement policy.

To know more about Main Memory visit-

brainly.com/question/32344234

#SPJ11

(b) Given a = 1.3 cm, b = 1.6 cm, t = 0.5 cm and I = 3 A, identify the values of the magnetic field intensity at 1.4 cm and 1.9 cm, respectively.

Answers

The magnetic field intensity of a solenoid can be given by the formula; B = μ₀NI/lμ₀ = 4π × 10^-7 tesla metre per ampereN = number of turnsI = Currentl = length of solenoid a = radius of solenoid b = length of solenoid We have; a = 1.3 cm (radius of solenoid)b = 1.6 cm (length of solenoid)t = 0.5 cmI = 3 A (Current)

For the answer, let us find the values of N and lN = Number of turns of the solenoid
l = πab = π × 1.3 × 1.6 cm² = 6.5452 cm
N = 2000 / 6.5452N = 305.78 turns (approx 306 turns)
Hence, N = 306 turns and l = 6.5452 cm
Substitute the values into the magnetic field formula to get the values of magnetic field intensity at the given positions;
B = μ₀NI/lAt 1.4 cm;
B = (4π × 10^-7 tesla metre per ampere)(306)(3 A)/1.4 cm
B = 1.01576 × 10^-3 tesla At 1.9 cm;
B = (4π × 10^-7 tesla metre per ampere)(306)(3 A)/1.9 cm
B = 6.39029 × 10^-4 tesla
Hence, at a distance of 1.4 cm and 1.9 cm from the solenoid, the values of the magnetic field intensity are 1.01576 × 10^-3 tesla and 6.39029 × 10^-4 tesla respectively.

to know more about magnetic field intensity visit:

brainly.com/question/30751459

#SPJ11

How to Solve a Maze using dead-end-filling algorithm in Python with a visualization of the .

Answers

Dead-End Filling Algorithm is a method of generating a maze. A maze is a complex network of paths and passages that are used to challenge someone who is trying to find their way through it. Maze solving is a great problem to solve as it's a simple yet intriguing problem that provides a lot of learning opportunities.

Here's the Python code for the dead-end-filling algorithm:

```
import random

def generate_maze(n):
   maze = [[0 for x in range(n)] for y in range(n)]
   for i in range(n):
       maze[0][i] = 1
       maze[n-1][i] = 1
       maze[i][0] = 1
       maze[i][n-1] = 1

   for i in range(2, n-2, 2):
       for j in range(2, n-2, 2):
           maze[i][j] = 1

   for i in range(2, n-2, 2):
       for j in range(2, n-2, 2):
           directions = ['N', 'S', 'E', 'W']
           random.shuffle(directions)
           for direction in directions:
               if direction == 'N' and maze[i-2][j] == 0:
                   maze[i-1][j] = 1
                   maze[i-2][j] = 1
                   break
               if direction == 'S' and maze[i+2][j] == 0:
                   maze[i+1][j] = 1
                   maze[i+2][j] = 1
                   break
               if direction == 'E' and maze[i][j+2] == 0:
                   maze[i][j+1] = 1
                   maze[i][j+2] = 1
                   break
               if direction == 'W' and maze[i][j-2] == 0:
                   maze[i][j-1] = 1
                   maze[i][j-2] = 1
                   break
   return maze

def visualize(maze):
   for row in maze:
       for cell in row:
           if cell == 1:
               print('██', end='')
           else:
               print('  ', end='')
       print()

def dfs(maze, visited, row, col):
   if row < 0 or row >= len(maze) or col < 0 or col >= len(maze[0]):
       return
   if visited[row][col] or maze[row][col] == 0:
       return
   visited[row][col] = True
   maze[row][col] = 2
   dfs(maze, visited, row-1, col)
   dfs(maze, visited, row+1, col)
   dfs(maze, visited, row, col-1)
   dfs(maze, visited, row, col+1)

def fill_dead_ends(maze):
   changed = True
   while changed:
       changed = False
       for i in range(1, len(maze)-1):
           for j in range(1, len(maze[0])-1):
               if maze[i][j] == 1:
                   count = 0
                   if maze[i-1][j] == 2:
                       count += 1
                   if maze[i+1][j] == 2:
                       count += 1
                   if maze[i][j-1] == 2:
                       count += 1
                   if maze[i][j+1] == 2:
                       count += 1
                   if count >= 3:
                       maze[i][j] = 2
                       changed = True

def main():
   n = int(input('Enter size of maze: '))
   maze = generate_maze(n)
   visualize(maze)
   visited = [[False for x in range(n)] for y in range(n)]
   dfs(maze, visited, 1, 1)
   fill_dead_ends(maze)
   print('\n')
   visualize(maze)

if __name__ == '__main__':
   main()
```


To run this code, simply save it to a Python file (e.g. maze.py) and run it from the command line by typing `python maze.py`. The program will prompt you to enter the size of the maze you want to generate, and then it will generate, traverse, and fill in the dead ends of the maze before printing it to the console.

To know more about Algorithm visit:
https://brainly.com/question/28724722

#SPJ11

*WRITE THE ANSWER BY THE KEYBOARD *
Information Security Management involves the consideration of various laws and legal
constraints. One on hand, businesses must be compliant with laws, and therefore act as a
constraint on activity. On the other hand, laws act as a form of control against attacks.
a) The EU’s General Data Protection Regulation (GDPR) came into force in UK in May
2018. At the same time in the UK the Data Protection Act 2018 (DPA) replaced the Data
Protection Act 1998.
i) Outline the six data protection principles of GDPR.
ii) Explain the relationship between GDPR and DPA 2018. Why are two pieces
of legislation necessary?
b) The Computer Misuse Act 1990 (CMA) is the primary piece of legislation concerned
with ‘hacking attacks’ on computer systems.
i) Why was the CMA initially unable to be used against Denial-of-Service
attacks? What offence was introduced to rectify this problem?
ii) If a person distributes malware via a website, which CMA 1990 offence
would be considered? How could a defendant argue they are innocent, and
an offence has not been committed?
*WRITE THE ANSWER BY THE KEYBOARD *

Answers

a) i) The six data protection principles of GDPR are: Lawfulness, fairness, and transparency Purpose limitation Data minimization Accuracy Storage limitation Integrity and confidentiality. ii) GDPR and DPA 2018 work together. GDPR lays down data protection rules and sets standards for data processing in the European Union.

The DPA 2018 complements the GDPR by providing additional detail on how GDPR should be applied in the UK. Two pieces of legislation were necessary to provide a legal framework that will guarantee the rights and freedoms of individuals with respect to the processing of their personal data, whilst ensuring free flow of data within the European Union.b) i) The Computer Misuse Act 1990 was initially unable to be used against Denial-of-Service (DoS) attacks because DoS attacks, unlike hacking, did not fit the offence definition. It was not a crime to launch a DoS attack. However, to rectify the problem, the Police and Justice Act 2006 created an offence of unauthorised acts intending to impair computer systems.ii) If a person distributes malware through a website, Section 3A of the Computer Misuse Act 1990 offence would be considered.

The defendant could argue that they are innocent and that the offence has not been committed by stating that they did not know the malware was on their website, or that it was placed there without their knowledge. The defendant could also argue that they were not the author or distributor of the malware. Therefore, it could be a complex matter to prosecute. Main answer: Information Security Management involves the consideration of various laws and legal constraints, as businesses must be compliant with laws, and laws act as a form of control against attacks.The EU’s General Data Protection Regulation (GDPR) came into force in the UK in May 2018. At the same time in the UK, the Data Protection Act 2018 (DPA) replaced the Data Protection Act 1998. i) The six data protection principles of GDPR are Lawfulness, fairness, and transparency, Purpose limitation, Data minimization, Accuracy, Storage limitation, and Integrity and confidentiality. ii) GDPR and DPA 2018 work together. GDPR lays down data protection rules and sets standards for data processing in the European Union. The DPA 2018 complements the GDPR by providing additional detail on how GDPR should be applied in the UK. Two pieces of legislation were necessary to provide a legal framework that will guarantee the rights and freedoms of individuals with respect to the processing of their personal data while ensuring free flow of data within the European Union.The Computer Misuse Act 1990 (CMA) is the primary piece of legislation concerned with hacking attacks on computer systems. i) The Computer Misuse Act 1990 was initially unable to be used against Denial-of-Service (DoS) attacks because DoS attacks, unlike hacking, did not fit the offence definition.

However, to rectify the problem, the Police and Justice Act 2006 created an offence of unauthorized acts intending to impair computer systems.ii) If a person distributes malware through a website, Section 3A of the Computer Misuse Act 1990 offence would be considered. The defendant could argue that they are innocent and that the offence has not been committed by stating that they did not know the malware was on their website, or that it was placed there without their knowledge. The defendant could also argue that they were not the author or distributor of the malware. Therefore, it could be a complex matter to prosecute.

Information Security Management is critical for companies to protect against data breaches, hacks, and other forms of cyberattacks. Various laws and legal constraints have been implemented to ensure that data protection principles are adhered to, and offenders face legal consequences. The Computer Misuse Act 1990 is the primary piece of legislation concerned with hacking attacks on computer systems, and it has been modified over time to cover a wide range of offences.

To know more about Information Security Management :

brainly.com/question/32254194

#SPJ11

HD Stations
-----------
Select the DisplayName and SortOrder from the CHANNEL table for all TV channels where the SortOrder is
between 700 and 799 inclusive. Use the BETWEEN ... AND ... operator. Exclude all rows where the ExternalID
is NULL. Use "Channel Name" as the header for the name column and "Sort Order" for the sort order column.
Display results in ascending order by SortOrder.
Hint: The correct answer will have 93 rows and will look like this:
Channel Name Sort Order
------------ -----------
KATUDT 702
KRCWDT 703
KPXGDT 705
KOINDT 706
DSCHDP 707
KGWDT 708
WGNAPHD 709
KOPBDT 710
VEL 711
KPTVDT 712
KPDXDT 713
FUSEHD 714
...
UPHD 797
AXSTV 798
NFLNRZD 799

Answers

Based on the given requirements, the SQL query to retrieve the desired results would be

SELECT DisplayName AS "Channel Name", SortOrder AS "Sort Order"

FROM CHANNEL

WHERE SortOrder BETWEEN 700 AND 799

   AND ExternalID IS NOT NULL

ORDER BY SortOrder ASC;

How does this work?

This query selects the DisplayName and SortOrder columns from the CHANNEL table,filters the   rows based on the SortOrder being between 700 and 799 (inclusive), excludes rows where the ExternalID is NULL, and sorts the results in ascending order by the SortOrder column.

An SQL query is a statement used to retrieve or   manipulate data in a relational database. It is written in the Structured Query Language (SQL) and specifies the desired action   to be performed on the database, such as selecting, inserting,updating, or deleting data.

Learn more about SQL Query at:

https://brainly.com/question/25694408

#SPJ4

Assume Alice wants to share a large file Secrect.txt with her friend Bob. Both of them have symmetric and asymmetric cryptographical algorithms to use to ensure the file is confidentially transferred. Answer the following questions:
What symmetric methods are available for them to use to ensure data confidentiality? Discuss the specific steps for both ends to encrypt and decrypt the file as well as how to distributing the key.
Alice:
Bob:
Key Distribution:
What asymmetric methods are available for them to use to ensure data confidentiality? Discuss the specific steps for both ends to encrypt and decrypt the file as well as how to distributing the key.
Alice:
Bob:
Key Distribution:
How can Bob verify that the file was not changed during the transmission in the asymmetric approach to ensure data integrity? Discuss the specific steps both ends need to take.
Alice:
Bob:
Assume there is an attacker Eve, how can he design a scheme to launch a Man-In-The-Middle attack? Describe the specific steps.
In order to avoid Man-In-The-Middle attacks by Eve, what should Alice and Bob do? Describe the specific steps.
Alice:
Bob:

Answers

Symmetric methods available for data confidentiality include algorithms like AES (Advanced Encryption Standard) and 3DES (Triple Data Encryption Standard).

For Alice and Bob to use symmetric encryption, they would follow these steps:

1. Alice encrypts the file (Secret.txt) using a symmetric encryption algorithm, such as AES, with a shared secret key.

2. Alice securely shares the encrypted file with Bob.

3. Bob receives the encrypted file and decrypts it using the same symmetric encryption algorithm and the shared secret key.

In terms of key distribution, Alice and Bob need to securely exchange the shared secret key. They can achieve this through methods like key exchange protocols or pre-sharing the key through a secure channel.

Asymmetric methods available for data confidentiality include algorithms like RSA (Rivest-Shamir-Adleman) and Elliptic Curve Cryptography (ECC).

For Alice and Bob to use asymmetric encryption, they would follow these steps:

1. Alice obtains Bob's public key.

2. Alice encrypts the file (Secret.txt) using Bob's public key.

3. Alice sends the encrypted file to Bob.

4. Bob receives the encrypted file and decrypts it using his private key.

Key distribution in asymmetric encryption involves securely distributing public keys. Bob needs to ensure that his public key is securely shared with Alice so that she can encrypt the file using his public key.

To verify file integrity in the asymmetric approach, Bob can use a digital signature. Alice would generate a digital signature using her private key, which Bob can verify using Alice's public key. If the signature is valid, it ensures that the file was not changed during transmission.

In a Man-In-The-Middle (MITM) attack, Eve intercepts the communication between Alice and Bob and impersonates both parties to intercept and modify the messages. The steps for Eve to launch an MITM attack include intercepting the initial key exchange, generating her own key pair, and relaying messages between Alice and Bob while decrypting and re-encrypting them with the appropriate keys.

To avoid MITM attacks, Alice and Bob should authenticate each other's identities through the use of digital certificates or a trusted third party. They should also encrypt their communications using secure protocols like TLS/SSL. Additionally, they should verify each other's public keys to ensure they are not compromised or tampered with. By following these steps, Alice and Bob can enhance the security of their communication and protect against MITM attacks.

To know more about Decrypting visit-

brainly.com/question/2813734

#SPJ11

Other Questions
Problem 4: P13-37A C-Cell Wireless needed additional capital to expand, so the business incorporated. The charter from the state of Georgia authorizes C-Cell to issue 50,000 shares of 7%, $50 par value cumulative preferred stock and 120,000 shares of $2 par value common stock. During the first month, C-Cell completed the following transactions. Assume C-Cell's net income for the month was $96,000. Transactions: 2010 se o mares or preferred stock for proper share. 10/09/2016 Issued 12,000 shares of common stock for cash of $60,000 10/10/2016 Declared a $16.000 cash dividend for stockholders of recor PREVIOUS 4 NEXT Assignment: This question has 3 requirements. Scroll down to review the requirements and ensure you from complete all requirements before submitting your work for grading. Requirements: et The accounts used by C-Cell Wireless are provided in the Chart of Accounts (click on "Chart of Accounts" to view). The accounts have already been opened in the General Ledger (click on "General Ledger" to view). 1. Prepare journal entries to record the transactions of C-Cell Wireless and post the entries to the General Ledger. (Explanations are not required.) 2. Review each of the accounts in the General Ledger to see the results of posting the journal 0,000. ? PREVIOUS 4 NEXT ? -om complete all requirements before submitting your work for grading. Requirements: The accounts used by C-Cell Wireless are provided in the Chart of Accounts (click on "Chart of Accounts" to view). The accounts have already been opened in the General Ledger (click on "General Ledger" to view). 1. Prepare journal entries to record the transactions of C-Cell Wireless and post the entries to the General Ledger. (Explanations are not required.) 2. Review each of the accounts in the General Ledger to see the results of posting the journal entries, including the changes in each account. 3. Review the stockholders' equity section of C-Cell's balance sheet at October 31, 2016. 000. 3. Review the stockholders' equity section of C-Cell's balance sheet at October 31, 2016 Transactions: 10/02/2016 Issued 22,000 shares of common stock for a building with a market value of $120,000. 10/06/2016 Issued 900 shares of preferred stock for $70 per share. 10/09/2016 Issued 12,000 shares of common stock for cash of $60,000. 10/10/2016 Declared a $16,000 cash dividend for stockholders of record on Oct. 20. Use a separate Dividends Payable account for preferred and common stock SAVE WORK Reser Resuus SUBHEY WORK Transactions: 20/09/2010 preferre Kurr per amore 10/09/2016 Issued 12,000 shares of common stock for cash of $60,000. 10/10/2016 Declared a $16,000 cash dividend for stockholders of record on Oct. 20. Use a separate Dividends Payable account for preferred and common stock. 10/25/2016 Paid the cash dividend. Problem 4: P13-37A complete all requirements before submitting your work for grading C-Cell Wireless needed additional capital to expand, so the business incorporated. The charter from the state of Georgia authorizes C-Cell to issue 50,000 shares of 7%, $50 par value cumulative preferred stock and 120,000 shares of $2 par value common Requirements: stock. During the first month, C-Cell completed the following transactions. Assume C-Cell's net income for the month was 595,000. The accounts used by C-Cell Wireless are provided in the Chart of Accounts (click on "Chart of Accounts" to view). The accounts have already been opened in the General Ledger (click on "General Ledger" to view). 1. Prepare journal entries to record the transactions of C-Cell Wireless and post the entries to the General Ledger. (Explanations are not required) 2. Review each of the accounts in the General Ledger to see the results of posting the journal entries, including the changes in each account. 3. Review the stockholders' equity section of C-Cell's balance sheet at October 31, 2016. Transactions: Toy00/2010 8300 300 anores or preferreo avocK TOT 970 per snarer 10/09/2016 Issued 12,000 shares of common stock for cash of $60,000. 10/10/2016 Declared a $16,000 cash dividend for stockholders of record on Oct. 20. Use a separate Dividends Payable account for preferred and common 10/25/2016 Paid the cash dividend. SAVE WORK RESET RESULTS SUBMIT WORK BUSINESS REPORTS COMPANY INFORMATION CHART OF ACCOUNTS GENERAL JOURNAL Account Debit Credit B Datel M 10/01/2016 Select an account the assembly department started the month with 25,500 units in its beginning work in process inventory. an additional 310,500 units were transferred in from the prior department during the month to begin processing in the assembly department. there were 30,500 units in the ending work in process inventory of the assembly department. how many units were transferred to the next processing department during the month? You made all staff complete a Customer Relationship Management (CRM) Questionnaire before and after the mandatory training program. The scores range from 0 (poor customer relation) to 100% (excellent customer relation) with a positive change of 7.5% of the scores before and after the training considered as improvement in good customer relationship. Another hospital system in the same city that you are employed indicated that when they implemented the training that you implemented, they observed an overall change in scores of 5% for their staff. Perform a one-sample t-test to evaluate if the average change score is indeed 5% among your ED staff.When I perform SPSS one-sample t-test, the test value will be 5 (%) or 0.05? A consumer's utility function is U=2a 21+b,p a=1,p b=1, and income is 10 . 1. Find the demand curve for good a. 2. Now the price of good a increases to 2 , find the compensating variation and equivalent variation. 3. Now the utility function is U=a 21b 21,p b=1, income is 10 , and p achanges from 1 to 2 . Find compensating variation, equivalent variation, and changes in consumer surplus. 22) It is stated in Module 0 that by February 16 th, 2022 the probability of impact with Asteroid 2022 TTX is about 5%. The "Brightness" measurements indicate that the asteroid's size could be approximately 100 m. You are on the JPL (Jet Propulsion Laboratory) team and are askd to let the rest of the scientists know what the Torino scale value could be. Your answer is. ( 1mk ) a) Only 1 b) Only 3 c) Only 4 d) 3 and 4 are possible e) 1, 3, and 4 are possible 23) It is stated in Module 1 that by February 23th, 2022 the probability of impact with Asteroid 2022 TTX has now risen to 71%. The "Brightness" measurements indicate that the asteroid's size could be as large as 440 m. You are on the JPL (Jet Propulsion Laboratory) team and are asked to let the rest of the scientists know what the Torino scale value could be. Your answer is. (1mk) A) Only 3 B)Only 4 C)Only 5 D) 3 and 4 are possible E) 3,4 and 5 are possible First drop down answer choices areblack holewhite dwarfnuetron starblack dwarf. Show transcribed dataThis stellar remnant is produced by the death of a Sun-sized (or smaller) star: white dwarf. When a very large, but not the biggest, type of star collapses (ie, less than about 3 times as much material as our Sun remain) after a supernova explosion, the stellar remnant that is produced is called a(n) The object produced is only about 20 km across, is very hot and rotates at a very rapid rate. Its strong magnetic field produces radio waves, thus we are sometimes able to detect these objects as a result of the short, rapid bursts of radio radiation they produce, so these objects are called When the absolute largest stars collapse and explode, creating a a huge supernova, the object collapses to form a neutron star. NO LINKS!!! URGENT HELP PLEASE!! Read "Nations Aim to Secure Supply Chains by Turning Offshoring Into 'Friend-Shoring'; U.S. officials and allies around the world are looking to establish friendly supply routes fy goods amid a war and global pandemic" article. Summarize the article explaining what "friend- shoring" is (100-300 words). (Note: Clicking the above link will take you to the pay-walled WSJ article. But, it is available for ASU students for free. Go to the Library Services website of ASU (Administration Academic Affairs Library Services). Then go to Galileo Scholar page. Select ProQuest Central. Search for the article name.). Find the exact value, if any, of the following composite function. Do not use a calculator. tan (tan-15) Select the correct choice below and, if necessary, fill in the answer box within your choice. Use the Chinese remainder theorem to solve the following systems of equations. (a) x33(mod101) and x1(mod53)(5marks). (b) 7x13(mod17) and 2x15(mod21)(10marks). (c) Verify the answer of each system from Parts (a) and (b) in sagemath. This means writing sagemath code to answer each system (1+2 marks). (d) (D grade question) The Chinese remainder theorem can be extended to an arbitrary number of simultaneous congruences xa 1(modn i), for i=1,2,,k. You will study independently this extension in the textbook and solve the following system. x=3(mod11),x=5(mod23),x=7(mod13).5+10+3+12=30 marks Given G(s)= s(s 2+2s+2)(s+2)KUse Routh Stability Criterion to determine the following: i. Range of the gain, K for the system to be stable ii. The value of the poles for K value found in i). How can I calculate Cache Size Overhead for directory baseprotocols and snooping protocol? Huehn-Brown Products in St. Petersburg offers the following discount schedule for its 4-by-8-foot sheets of quality plywood. Order Unit Cost $18.00 9 sheets or less 10 to 50 sheets More than 50 sheets $17.50 $17.25 Home Sweet Home Company orders plywood from Huehn-Brown. Home Sweet Home has an ordering cost of $45. Carrying cost is 20%, and annual demand is 100 sheets. What do you recommend? The best strategy is to with a total cost of $ (enter your response rounded to two decimal places). In a 600-700 content words paper, discuss how political, legal, and ethical issues can affect the financial and business operations of a company. How does this impact Corporate Social Responsibility (CSR) activities and Human Resources (HR) departments? Flora's Flowers buys some pots and Vases with a list price of $22,700. If the supplier offers a trade discount that yields a net price of $18.955, what is the 13.5% 16.5% 83.5% 36.5% Consider the initial value problem y y 12y = 0, y(0) = a, y'(0) = 4 Find the value of a so that the solution to the initial value problem approaches zero as t = 8 Is the following statement True or False? When assumptions A1-A4 hold, but there is multicollinearity, then the OLS estimator is no longer the Best Linear Unbiased Estimator (BLUE). True False Let ([0,1], L, m) be a Lebesgue measure space, and let A be a nonempty measurable subset of [0,1]. Let {E}%=1 [0,1] be a countable disjoint collection of Lebesgue measurable sets. Let f:[0,1] (0,1] be a measurable function. Show that for every e > 0, there is a natural number N and a set C such that - for all x E CE. 1 1 m(C) < and NE+1 NE To identify waste, what must you do first? A. Understand the value. B. Go and see. C. Find a trash can. D. Map the process. A gas analyser connected to a combustion system combusting the fuel above has the following gas concentrations:Percentage of Carbon Dioxide: 17.2 %Percentage of Oxygen: 2.6 %Calcualte the air-to-fuel equivalence ratio (c)The air-to-fuel equivalence raito, to 2 decimal places, is: