for the following question, refer to the system state shown below:allocation max availablea b c d a b c d a b c dp0 0 0 1 2 1 0 3 2 1 5 2 0p1 1 0 0 0 2 8 3 1p2 1 3 5 4 2 3 5 6p3 0 6 3 2 0 6 5 2p4 1 1 2 5 2 6 5 6a. (8 points) is the system in a safe state? prove your answer. show all work.b. (2 points) can the processes in this question complete without a deadlock? if so, give an orderingof the processes that will complete successfully. if not, describe why not.
Answers
A deadlock occurs when two computer programmes that are using the same resource effectively block each other from using it, which causes both programmes to stop working.
What causes deadlock in a system?When a group of processes is in a wait state, a deadlock arises because each process is awaiting a resource that is being held by another waiting process. As a result, all deadlocks entail competing demands for resources from two or more processes.A deadlock occurs when two computer programmes that are using the same resource effectively block each other from using it, which causes both programmes to stop working. One application could only run at a time on the first computer operating systems.By ensuring that all programmes access their shared data in the same order, for example by locking rows in Table A first, then Table B, then Table C, and so on, it is occasionally possible to limit the incidence of deadlocks.Find the attachment answer
Learn more about deadlock refer to :
https://brainly.com/question/29544979
#SPJ4
Related Questions
a newly popular unit of data in the big data era is the petabyte (pb), which is
Answers
A newly popular unit of data in the era of Big Data is the petabyte (PB), which is '10^15 bytes'.
Big data is referred to as the large, diverse sets of information that grow at ever-increasing rates. Big data encompasses the volume of information, the speed at which it is created and collected, and the scope of the data points being covered. Since big data deals with a large and complex volume of data, it needs measure in petabytes (PB). In the context of big data, a petabyte (PB) is a measure of data storage capacity, which is equal to 2 to the 50th power of bytes. There are 1,024 terabytes (TB) in a petabyte (PB) or 1 million gigabytes (GB), and approximately 1,024 petabytes (PB) make up one exabyte.
You can learn more about big data at
https://brainly.com/question/28333051
#SPJ4
the domain controllers are the computers that store and run which of the following?
Answers
The domain controllers are the computers that store and run the Active Directory database.
What is domain controllers?The domain controller is one of most type of the server that process request from users within computer domain for authentication.
Domain controllers will control all domain access and also it can block access for unauthorized to domain networks, it is also allowing authorized users to access all directory services.
The Active Directory database is a database that contains all users and device configurations.
Since, domain controller in simply need authenticates in order to perform its function so the domain controller will run the Active Directory database that have data for all users and device.
You question is incomplete, but most probably your full question was
The domain controllers are the computers that store and run which of the following?
The user database
The services database
The Managed Service Accounts database
The Active Directory database
Learn more about domain controller here:
brainly.com/question/25664001
#SPJ4
you begin troubleshooting a computer that does not start. the fan in the power supply does not turn on when the pc is plugged into a known good ac outlet. what would you do? power supply
Answers
Answer: The power supply may be eco-friendly and not turn the fan on until the cpu or gpu is under load requiring more power from the power supply. To turn the fan On I recommend running a benchmark to put the computer under load. If that doesn't turn the fan on check the fan settings in your motherboard bios.
Explanation:
what advice should you give him? place brightly colored graphics at the end of the report. avoid overusing graphics, color, and decoration. use color and decoration without restraint.what advice should you give him? place brightly colored graphics at the end of the report. avoid overusing graphics, color, and decoration. use color and decoration without restraint.
Answers
The advice you should give him is to avoid overusing graphics, color, and decoration in the report.
Why not to overuse?While it can be tempting to use these elements to make a report more visually appealing, it is important to use them in moderation.
Overusing graphics, color, and decoration can make a report difficult to read and can distract from the content of the report.
Instead, you should advise him to use color and decoration sparingly, and to focus on presenting the information in the report in a clear and concise manner.
Additionally, you could recommend placing brightly colored graphics at the end of the report, so that they do not distract from the main content of the report.
To Know More About Graphics Design, Check Out
https://brainly.com/question/7162811
#SPJ4
methods that retrieve data of fields are called and methods used to modify the data in fields are called
Answers
Field data retrieval methods are referred to as Accessors, and field data modification methods are referred to as Mutators.
A mutators method is a technique used in computer science to manage changes to a variable. As setter techniques, they are likewise well-known. A getter, which returns the value of the private member variable, frequently follows a setter and together they are referred to as accessors.
According to the encapsulation concept, the mutator method is most frequently employed in object-oriented programming. In accordance with this principle, member variables of a class are made private to hide and protect them from other code. A public member function (the mutator method) is the only way to change a private member variable; it receives the desired new value as a parameter, validates it, and then modifies the private member variable. Assignment operator overloading and mutator methods are similar.
Learn more about mutators here:
https://brainly.com/question/15725263
#SPJ4
the number 0.405 is here represented as a decimal fraction. multiply it by two. the digit in the one's place of the result is the bit that should go in the (1/2)'s place of the binary fraction. what is that digit?
Answers
The quantity according to binary system is 1.
Please explain the decimal system.The decimal numeral system, sometimes referred to as the base-ten positional numeral system and decanary, is the accepted method for representing both integer and non-integer numbers. The Hindu-Arabic number system has been expanded to include non-integer values.
A decimal numeral is a general term for a number's notation using the decimal numeral system (also frequently merely called a decimal or, less accurately, a decimal number). Sometimes, a decimal separator is used to denote decimals (usually "." or "," as in 25.9703 or 3,1415).As in "3.14 is the approximate value of to two decimals," "decimal" may also refer specifically to the digits that follow the decimal separator. The function of zero-digits following a decimal separator is to denote the accuracy of a value.
To know more about Binary System, visit:
https://brainly.com/question/24736502
#SPJ4
you are on vacation and want to see where all the restaurants and trendy shops are in relation to your hotel. you remember there is an app on your pho
Answers
Using computer-generated perceptual data, augmented reality is an interactive experience that improves the real world.
How does augmented reality work?A 3D experience that enables people to engage with both the physical and digital worlds is created by overlaying digital data over real-world items in augmented reality. However, AR cannot and does not live in a vacuum; rather, it thrives in the Industry 4.0 ecosystem, which includes everything from big data to automated robotics, and which is cloud-connected.An explanation of the process of augmented reality is given below:An augmented reality (AR)-enabled camera-equipped device, such as smart glasses, a tablet, or a smartphone, analyzes a video feed to identify a real-world object or the surroundings around the user, such as a piece of equipment or the layout of a warehouse.An object's 3D digital twin, or "digital twin," located on the cloud, connects the physical and digital worlds. The actual object and digital data are both used to gather information.Then, data from the cloud is downloaded by the augmented reality gadget to learn more about the thing. It uses trackers or markers, such as GPS, accelerometers, orientation and barometer sensors, and more, to superimpose digital information over the object. This produces a 3D interface that is somewhat real and partially digital.By moving about and issuing commands to the cloud using a touchscreen, voice commands, or gestures, the user can interact with an object or environment thanks to real-time data streaming from products.The Complete Question is augmented reality.
To Learn more About augmented reality refer To:
https://brainly.com/question/9054673
#SPJ4
generally the goal of assembly line balancing is to part 2 a. determine the maximum time that an item is allowed at a workstation. b. maximize the number of workstations. c. minimize imbalance between machines or personnel while meeting a required output from the line. d. minimize the efficiency of the line.
Answers
Line balancing, also known as ALB, is the process of organizing the various processing and assembly tasks at the workstations so that the overall time spent at each workstation is nearly equal.
What does "assembly line balancing" entail?Assembly line balancing (ALB) problems aim to optimize a given objective function while properly allocating tasks to the workstations in a balanced manner without ignoring the relationship of priority. This problem, which is regarded as one of the trickier optimization problems, typically appears in a continuous production line. Installing an assembly line is an expensive and time-consuming decision, so it is crucial to design the line properly and balance the workload at the workstations.For companies that need assembly work done, robots have gradually replaced humans as the primary labor. Selecting the robot that is best suited for the task at hand for the assembly line is essential because there are many different types of robots, each with a unique capability and area of expertise. As a result, problems with robotic assembly line balancing (RALB) occur. In this chapter, we provide a detailed explanation of how to solve RALB problems using metaheuristics with the aim of minimizing cycle time. In particular, the layouts of the straight and U-shaped robotic assembly lines are investigated. Particle swarm optimization (PSO) is used to solve the problem, and experimental results are also produced by the method. These results are thoroughly analyzed and presented here.The Complete Question.
To Learn more About ALB refer to:
https://brainly.com/question/18094930
#SPJ4
create a dictionary with at least five key-value pairs. use strings for either the keys, the values, or both. on a single line, display your dictionary's keys and values, with a comma between each pair. modify one of the values in your dictionary. on a single line, display your dictionary's keys and values, with a comma between each pair. delete one of the key-value pairs from your dictionary. on a single line, display your dictionary's keys and values, with a comma between each pair. print a blank line. display your dictionary's keys, one per line. print a blank line. display your dictionary's values, one per line. do not print curly braces, quotation marks, or colons. do not hard code anything in your print statements! do not use my key-value pairs. choose your own! for extra credit, do not print the trailing (final) comma on each of the first three lines of output.
Answers
Answer:
def dictionary_remove():
dict = {'blue':1,'red':2,'green':3}
print(dict)
dict['blue'] = 4
print(dict)
del dict['red']
print(dict)
dictionary_remove()
Explanation: This is a function that meets the requirements of the instructions. First, it creates a dictionary with the key values 'red', 'green', and 'blue' and assigns each of them a number. After it changes blue from 1 to 4 and then gets rid of the red.
a personal computer with a monitor and keyboard requires 40 w at 115 v (rms). calculate the rms value of the current carried by its power cord. g
Answers
The RMS value of the current carried cord is 0.347
What is RMS value and voltage ?A sinusoidal source of electromotive force is described by its root-mean-square (rms) voltage (Vrms). It is the voltage squared time average's square root. Vrms is equal to V0/2, or, in other words, 0.707V0.
RMS, or the Root-Mean-Square of current instantaneous values Direct current that passes through a resistance to produce alternating current yields the RMS value of the current. AC has an RMS value that is higher than the average. The area covered during a half-cycle can be used to calculate the sine current wave's RMS value.
To determine the effective current through the power code
[tex]I_{n}[/tex] = p/[tex]v_{n}[/tex]
Where [tex]I_{n}[/tex] = effective current
P = power 40 w
[tex]v_{n}[/tex]= effective voltage ( 115v)
[tex]I_{n}[/tex] =40/115
[tex]I_{n}[/tex] =0.347 A
Therefore the RMS value is 0.347
To learn more about RMS value refer to :
https://brainly.com/question/22974871
#SPJ4
The process of defining relationships among data to create useful information requires Select one: o a. a formal education o b. knowledge C. intuition d. an information system
Answers
Option b is correct. Knowledge is needed to define relationships between data in order to provide usable information.
Knowledge is needed to define relationships between data in order to provide usable information. It involves being aware of a body of knowledge and comprehending how it can be applied to help a particular activity or come to a conclusion.
Data is information that has been processed to be helpful, whereas information is just raw facts that have no inherent significance.
Information that has been processed, examined, and understood and may be utilized to guide decisions is known as knowledge. The idea of knowledge encompasses both the information and the capacity to obtain it. For instance, the majority of applications, such as models and simulations, contain some kind of stored information.
Know more about information here:
https://brainly.com/question/19658561
#SPJ4
the simple money multiplier will as the required reserve ratio select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a increase, increases. b not change, increases. c decrease, decreases. d increase, decreases
Answers
The reserve ratio, r, is the only factor in the money multiplier formula, which is only 1/r.
What is Reserve Ratio?How much cash banks must keep on hand and refrain from investing is known as the reserve ratio. This crucial figure indicates the amount of cash that banks must maintain in their needed reserves or in their safe. However, banks can lend and invest with extra reserves. The sum of a bank's needed and extra reserves is known as total reserves. Reserves that are necessary must be kept on hand while surplus reserves can be utilised to generate income. Total reserves = Required reserves plus Excess Reserves.Federal Reserve policy governs the reserve ratio. They determine the proportion of deposits a bank must hold in reserves.If Joe made a deposit of $1,000 and the Federal Reserve required banks to hold onto 15% of all deposits, the bank would have to hold onto $150 and be permitted to lend the rest $850.The reserve ratio calculation is done by multiplying reserves by central bank or deposit liabilities. A bank's deposit obligations are all of the funds it has gotten from customers and businesses. A bank's compliance with the current Federal Reserve regulations would be assessed using this equation. Consider a scenario in which a bank has a reserve of $1 million and has a total deposit liability of $11 million. The above calculation can be used to determine whether or not one has 11% of the necessary reserve by inserting these data in.This bank would be in compliance with the rules of the Federal Reserve as long as the reserve ratio is 11 or less.To Learn more About reserve ratio refer to:
https://brainly.com/question/13758092
#SPJ4
consider a 16-bit processor in which the following appears in main memory, starting at location 100. a. the first part of the first word (content at 100) indicates that this instruction loads a value into an accumulator, the value of 300 in location 101 may be part of the address calculator. the mode field specifies an addressing mode and, if appropriate, indicates a source register. b. assume that when used, the source register r1, which has a value of 400. c. there is also a base register that contains the value 200, assume that location 259 contains the value 499, location 260 contains the value 500, and so on. determine the effective address and the operand to be loaded for the following address modes: a) register indirect addressing, b) direct addressing c) displacement addressing d) indirect addressing e) immediate addressing f) register addressing g) relative addressing. g
Answers
A 16-bit integer can hold 216 (or 65,536 unique values). These values are integers between 0 and 65,535 in an unsigned representation; using two's complement, possible values range from 32,768 to 32,767. As a result, a processor with 16-bit memory addresses can access 64 KB of byte-addressable memory directly.
What is a Memory addresses?
A memory address is a unique location in RAM used to track where data is stored. A single computer memory IC can have one million, two million, or more random-access memory addresses, which is why memory is referred to as RAM (random access memory).
To know more about Memory addresses, visit: https://brainly.com/question/29044480
#SPJ4
an application layer process needs to transmit data with as little overhead as possible. the application protocol provides error detection and recovery if the data is lost. what transport layer protocol should this process use?
Answers
If the data is lost, the application protocol offers error detection and recovery. "User Datagram Protocol" is the transport layer protocol utilized for the procedure.
Explain the term User Datagram Protocol?A communications protocol called User Datagram Protocol (UDP) is largely used to establish low-latency, loss-tolerant connections between internet-based applications.
UDP allows data to be transferred before the receiving party provides an agreement, which speeds up transfers.The communication between application processes (clients & servers) operating on various end systems is governed by application layer protocols. An application layer, in particular, is indeed an abstract layer that manages the TCP/IP and OSI model's sharing protocol.For the stated question-
A procedure at the application layer must communicate data with the least amount of overhead. When errors occur, the application protocol offers error recovery in case the data is lost.Thus, the process uses "User Datagram Protocol," a transport layer protocol.
To know more about the User Datagram Protocol, here
https://brainly.com/question/20038618
#SPJ4
what type of device can be used to assess the quality of a wireless signal?
Answers
You may gather information, find issues, and suggest potential fixes, like changing to another channel to relieve congestion, by regularly using a Wi-Fi network analyzer for Wi-Fi Analyzer.
You may use the Wi-Fi Analyzer app for Android or the Airport Utility app for iPhone and iPad to check the strength of the Wi-Fi signal on your phone or tablet. Both are user-friendly and provide information about any nearby wireless networks. To display wifi settings, use the command after typing it: display interfaces using netsh wlan. Wi-Fi is a Wireless Local Area Network (WLAN) technology that uses the 2.4 GHz and 5 GHz ISM bands to link electronic devices. teaches us that when wireless signal intensity, measured in decibels (dB), is transferred through the channel, interference and multipath fading occur. The signal strength is influenced by several things. In order to broadcast a wireless signal and gauge the received signal strength, we used a few commercially available adapters and antenna equipment for this investigation.
Learn more about Wi-Fi here:
https://brainly.com/question/13267388
#SPJ4
How many gigabytes would it take to download only 10 photos
Answers
Answer:
It depends on the size of the picture and multiple different factors
Explanation:
your organization has decided to use dhcp for ipv6. you want all windows 10 systems using ipv6 to get all of their tcp/ip information through dhcp. how would you set up the network?
Answers
your organization has decided to use dhcp for ipv6. you want all windows 10 systems using ipv6 to get all of their tcp/ip information through dhcp. By setting up a Stateful network would you set up the network .
Why is DHCP utilized and what does it do?
Network devices are set up to communicate on an IP network using the Dynamic Host Configuration Protocol (DHCP).
A DHCP client utilizes the DHCP protocol to request configuration data from a DHCP server, including an IP address, a default route, and one or more DNS server addresses.
What are DHCP and DNS?
It is possible to translate domain names (like its.umich.edu) into IP addresses using the Domain Name System (DNS) on the Internet.
In order to automatically assign IP addresses and other parameters to devices when they connect to a network, there is a mechanism called Dynamic Host Configuration Protocol (DHCP).
Learn more about DHCP Server .
brainly.com/question/29432103
#SPJ4
Walmart's continuous replenishment system is an example of a model. enterprise-based supply chain optimization forecast-based push-based pull-based
Answers
Walmart is an example of pull-based model because of its continuous replenishment
What is a pull-based model in enterprise?
'pull' is enterprise-centric, with 'enterprise' in this context meaning a 'bold endeavour,' a story or storyworld that is shared with others. For example, when I want to mend a broken chair, I am at that point within the storyworld of 'How to mend a broken chair' - which gives me a reason, a 'Why,' to look for other players in that storyworld who can help me satisfy that need. A provider doesn't need to push anything at me because I'm already looking: the pull towards the provider is already there. But it does mean that the provider must see itself as a player in the shared story - and be able to understand the customer's needs, the 'outside-in' perspective, as well as its own.
Pull based model is exact opposite to the push based model, in pull based model the manufacture waits for the model
Hence to conclude the pull based model involves the continous replenishment and growth
To know more on pull based model follow this link:
https://brainly.com/question/6528189
#SPJ4
while using the internet, you type the url of one of your favorite sites in the browser. instead of going to the correct site, the browser displays a completely different website. when you use the ip address of the web server, the correct site is displayed. which type of attack has likely occurred?
Answers
DNS poisoning has occured. Filtering outbound traffic based on its originating address is one of the simplest techniques to prevent IP spoofing attacks.
Although Wireshark is best recognized as a tool for network traffic analysis, it may also be incredibly useful for passive network eavesdropping. a warning that suggests malicious activity on a system but, upon closer examination, reveals to be a case of lawful network activity. By filtering traffic with fake IP addresses, validating traffic, and preventing access from unauthorized outsiders, a firewall will assist in securing your network. The outbound traffic is examined by egress filtering, which looks for source IP addresses that don't correspond to those on the company's network. By using this strategy, insiders are prevented from conducting an IP spoofing assault.
Learn more about network here-
https://brainly.com/question/13992507
#SPJ4
the search box in the client apps screen allows you to search for apps by which 2 criteria
Answers
The 2 criteria by which search box in the client apps screen allows you to search for apps are name of the app, name of the client.
The new Microsoft Search box is located at the top of your Microsoft 365 programs on Windows. With the use of this effective tool, you may easily locate anything you're looking for, including text, instructions, assistance, and more. Let's examine what it can provide for you.
You may quickly view only customers who have subscriptions to apps that are either discounted, connected by you, or connected by others using the filter function. When you audit your clients' app subscriptions, you may use this to see which applications were connected by the company and which were connected by the client directly.
Know more about Search box here:
https://brainly.com/question/14825779
#SPJ4
a column that you create for an entity to serve solely as the primary key and that is visible to users is called a(n) .
Answers
The associations between tables are defined by logical keys, which include primary keys, foreign keys, and common keys. The logical keys may or may not be used as the physical keys for building indexes when you optimize your queries by creating them.
An logical key is what?
By using the logical key data type, the DBMS Server or your application can provide each row in a table a special key value. When a table has to have a unique key but the table's columns don't make one, logical keys can be helpful.
What is Python's logical key?
A logical key is one that would be used in the "real world" to search up a row. A logical key in our example data model is the name field. It is the user's screen name, and the name field is used multiple times throughout the software to look up a user's row.
To know more about Logical key visit;
https://brainly.com/question/28958402
#SPJ4
how would a view filter be configured to include only users from brazil and argentina?: Filter 1: exclude all countries except Brazil and Argentina
Filter 1: include Brazil > Filter 2: include Argentina
Filter 1: include Brazil or Argentina
Filter 1: include Argentina > Filter 2: include Brazil
Answers
Answer:
A view filter could be configured to include only users from Brazil and Argentina by using the "include" filter and specifying Brazil and Argentina as the only countries to be included. This could be done in a single filter, such as:
Filter 1: include Brazil and Argentina
Alternatively, the filter could be split into two separate filters, with the first filter including Brazil and the second filter including Argentina:
Filter 1: include Brazil
Filter 2: include Argentina
The order of the filters would not matter, as long as both Brazil and Argentina are included in the final configuration. The "exclude" filter would not be applicable in this situation, as it would exclude rather than include the specified countries.
the alpha advantage service we used in the sql assignment provides company stock information. this is an example of what?
Answers
Information about company equity is available through the alpha advantage service, which we used for the SQL assignment. A good API example is this.
What does a SQL do?A database can be communicated with using SQL. It is the with someone for relational database management systems, claims ANSI (American National Standards Institute).SQL statements are used insert data into databases or retrieve data from them.
Is SQL preferable to Python?Because SQL is a common language and has an intuitive structure, programming and coding tasks can be completed more quickly if someone is sincere about beginning a career as a developer. Python, on either hand, is for knowledgeable developers.
To know more about SQL visit:
https://brainly.com/question/13068613
#SPJ4
which form of authentication involves the exchange of a password-like key that must be entered on both devices?
Answers
Mode USB key
Which protocol encrypts data as it moves through a network?The network security protocol known as SSL Secure Socket Layer (SSL) is primarily used to protect sensitive data and internet connections. Both server/client and server/server devices communication are supported by this protocol. SSL encrypts data in transit to guard against reading.
What method is employed to encrypt data and keep it isolated from other Internet traffic?Using two separate keys to encrypt or sign data, public key cryptography makes one of the keys—the public key—available to everyone for usage. The private key is the name given to the other key.
To know more about devices visit:-
https://brainly.com/question/11599959
#SPJ4
what is recommended prime number p in (in bits) for diffie - hellman key exchange for security purposes?
Answers
For the Diffie-Hellman key exchange, P>=1024 bits is the suggested prime number (in bits).
A digital encryption technique called Diffie-Hellman key exchange allows two parties to securely exchange cryptographic keys over a public channel without having to use the internet to carry out their communication. To encrypt and decrypt their messages, the two parties employ symmetric cryptography. One of the earliest real-world applications of public key cryptography was presented in this 1976 publication by Whitfield Diffie and Martin Hellman.
Diffie-Hellman key exchange generates decryption keys by raising numbers to a chosen power. A would-be code breaker faces a mathematically impossible task because the parts of the keys are never directly transferred. The key exchange in the method doesn't include information sharing. Despite not knowing one another beforehand, the two parties work together to develop a key.
Learn more about Diffie-Hellman here:
https://brainly.com/question/29836650
#SPJ4
at the request of management, a senior server engineer deploys a proxy server for all users in the organization. the proxy provides many benefits for a uniform user experience and for it management. of the choices, which statements describe features the proxy provides? (select all that apply.)
Answers
Content Filtering and caching of Web Contents describe the features the proxy provides.
What are the features of proxy?
A proxy server is an intermediary server between the client and the internet.
Proxy servers offer the following basic functionalities:
Firewall and network data filtering.Network connection sharing.Data cachingWhat is the purpose of proxy and content filtering?
Proxy and content filtering use programs or even firewalls to screen traffic coming and going on the network in an effort to block access to objectionable, questionable, or explicit content.
Which is the purpose of web caching on a proxy server?
Web proxy caching stores copies of frequently accessed Web objects (such as documents, images, and articles) close to users and serves this information to them. Internet users get their information faster, and Internet bandwidth is freed for other tasks.
Thus, content filtering and caching of web content are the correct option.
To know more about proxy server:
https://brainly.com/question/24115426
#SPJ4
A wireless host needs to request an IP address. What protocol would be used to process the request? O a. ICMP O b. HTTP Oc DHCP O d. FTP
Answers
The protocol that can be used to process a wireless host that needs to request an IP address is c. DHCP
What is Dynamic Host Configuration Protocol?Dynamic Host Configuration Protocol (DHCP) is a network management protocol used to automate the process of configuring devices on IP networks, allowing them to use network services such as DNS, NTP, and any other any network communication protocol over UDP or TCP. The DHCP server automatically assigns IP addresses and other network configuration parameters to each device on the network so that they can communicate with other IP networks. DHCP is an improvement of an old protocol called BOOTP. DHCP is an important part of a DDI (DNS-DHCP-IPAM) solution.
Learn more about Dynamic Host Configuration Protocol https://brainly.com/question/14234787
#SPJ4
describe the difficulties that may arise when building a system from its components. what particular problems might occur when a system is built on a host computer for some target machine?
Answers
There are several difficulties that may arise when building a system from its components.
What are the difficulties?For example, the components of the system may not be compatible with each other, which can make it difficult to integrate them into a cohesive whole.
Additionally, the components may have different requirements and dependencies, which can make it difficult to ensure that they are properly configured and installed.
Furthermore, the components of the system may have different levels of complexity, which can make it difficult to manage and maintain the system as a whole.
To Know More About System, Check Out
https://brainly.com/question/29773718
#SPJ4
you want to use a tool to scan a system for vulnerabilities, including open ports, running services, and missing patches. which tool should you use?
Answers
A system can be searched for port vulnerabilities using a port scanner. One such piece of software is the RADMIN port scanner.
Is Nmap able to identify open ports?Because packet filtering prevents its probes from reaching the port, Nmap is unable to determine whether the port is open. A dedicated firewall device, router rules, or host-based firewall software could be used for the filtering. Since these ports provide so little information, they frustrate attackers.
What software do you use to check for services and open ports?For developers, network engineers, and system administrators, NMap is the most widely used port scanner. Additionally, Angry IP Scanner is a well-liked tool for internet and local network scanning.
To learn more about port scanner here
https://brainly.com/question/10097616
#SPJ1
list three issues of a distributed system. 2. (21) list the seven design issues of a distributed os. 3. (16) cite four advantages of a distributed system. 4. (15) cite three disadvantages of a distributed system. 5. (15) what is an embedded system? 6. (15) list three methods to obtain an embedded os.
Answers
Issues in various distributed systems are heterogeneity, network, scalability
Issues of a distributed os are design issues in security,compatibility,network,scalablity,resource management,connections,fault tolerance
Advantages of a distribution system collaboration, faster growth,more transparency,wider customer
An embedded system is A computer hardware and software combination created for a particular purpose is an embedded system. Additionally, embedded systems may operate as part of a bigger system. The systems may be programmable or may only perform certain functions.
The disadvantages of distributed systems are In distributed systems, it is challenging to ensure effective security because both the nodes and the connections must be protected.
While travelling from one node to another, certain messages and data may get lost in the network.
Three methods to obtain an embedded os are multi-tasking,pre-emptive and round robin algorithm
Hence to conclude above are the required information
To know more on embedded systems follow this link:
https://brainly.com/question/13014225
#SPJ4
