for the neutralization reaction below in which a strong base is reacted with a strong acid lioh hcl --> h2o na cl- how many grams of lithium hydroxide are needed to completely neutralize 500 ml of a 0.2 m solution of hcl?

To calculate the energy required to heat a substance, we can use the formula:

Q = mcΔT

where Q is the heat energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Given that we have 712.0 g of graphite, a specific heat capacity of 0.710 J/g-K, and a temperature change of 18.7 °C (20.7 °C - 2.0 °C)

Q = (712.0 g) x (0.710 J/g-K) x (18.7 °C)

Q = 10,965.64 J.

The energy required to heat 712.0 g of graphite from 2.0 °C to 20.7 °C is 10.965 kJ.

Learn more about Specific Heat Capacity here: https://brainly.com/question/29766819

#SPJ4

The following species produce OH- in water using the following reaction equation:

CO3^2-(aq) + H2O(l) -------> HCO2^-(aq) + OH^-(aq)

C6H5NH2(aq) +  H2O(l) -------> C6H5NH3^+(aq) + OH^-(aq)

C2H5NH2(aq) +  H2O(l) -------> C2H5NH3^+(aq) +  OH^-(aq)

Bases produce OH- when they react with water. A weak base is a substance that ionizes only to a small extent in water. A weak base remains largely undissociated in water. Recall that bases produce OH- in solution.

Here,

The equation of the reaction by which the following species produce OH- in water are shown below;

CO3^2-(aq) + H2O(l) -------> HCO2^-(aq) + OH^-(aq)

C6H5NH2(aq) +  H2O(l) -------> C6H5NH3^+(aq) + OH^-(aq)

C2H5NH2(aq) +  H2O(l) -------> C2H5NH3^+(aq) +  OH^-(aq)

To know more about weak bases,

https://brainly.com/question/12420454

#SPJ4

The concentration of C₅H₆ when 250 seconds have passed is 0.015 M. e. The slope of the plot will be less steep at a lower temperature.

The molar mass of many compounds can be calculated by dividing the mass of the compound by the number of moles of the compound.

d.

[C5H6]0⁻¹ = 25 M⁻¹

t = 250 s

k = 0.17 M⁻¹ s⁻¹

Now, substituting these values in the integrated rate law to get,

[C5H6]⁻¹ = 0.17 M⁻¹ s⁻¹ x 250 s + 25 M⁻¹

= 67 M⁻¹

or,

[C5H6] = 1/67 M⁻¹

= 0.015 M

e.

According to the Arrhenius equation, the rate constant of a reaction decreases with temperature.

Therefore, d. the concentration of C₅H₆ is 0.015 M.

e. At lower temperatures, the slope of the plot will be less steep.

To learn more about concentration, refer to the link:

https://brainly.com/question/13872928

#SPJ1

The question is incomplete. Your most probably complete question is given below:

The full question and the graph are added.

The mass in the grams of water can be cooled from 35 to 20 degree c by the evaporation of 60 g of water is the 2296.6 g.

Given that :

ΔH =  heat of vaporization  = 2.4 kJ/g = 2400 J/g

Mass of the water = 60 g

q = ΔH m

q = 2400 × 60

q = 144000 J

The heat expression is given as :

q = mc ΔT

q = 144000 J

m = ?

c = 4.18 J/ g k

ΔT = 308 K - 293 K = 15 K

m = q / c ΔT

m = 144000 / 4.18 × 15

m = 2296.6 g

To learn more about heat of vaporization here

https://brainly.com/question/13922061

#SPJ4

Answer: 127.46 g

Explanation:

ΔH = heat of vaporization = 2.4 kJ/mol = 2400 J/mol

Mass of water = 60 g

Moles of water = 60 g/18 g/mol = 3.33 moles

q = ΔH × moles

q = 2.4 kJ/g × 3.33 mol

q = 2400 J × 3.33 mol

q = 7992 J

The heat expression is given as :

q = 7992 J

m = ?

c = 4.18 J/g × k

ΔT = 308 K - 293 K = 15 K

q = mcΔT

m = q/cΔT

m = 7992/4.18 × 15

m = 127.46 g

According to electronic configuration, when elements become ion, aluminum, rubidium ,selenium, nitrogen, neon, chlorine, barium loose 3 electrons,1 electron, gain 2 electrons , gain 3 electrons,neon is stable, chlorine gains 1 electron and barium looses 2 electrons.

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Learn more about electronic configuration,here:

https://brainly.com/question/29757010

#SPJ1

The molar mass of Fe3(PO4)2 can be calculated by adding the molar masses of each individual element in the compound.

Fe3(PO4)2 is made up of:

3 atoms of Fe (molar mass of Fe = 55.845 g/mol)

2 atoms of P (molar mass of P = 30.973762 g/mol)

8 atoms of O (molar mass of O = 15.9994 g/mol)

To calculate the molar mass of Fe3(PO4)2, we add up the molar masses of each element:

Molar mass of Fe3(PO4)2 = 3(55.845 g/mol) + 2(30.973762 g/mol) + 8(15.9994 g/mol)

= 167.535 g/mol

So the molar mass of Fe3(PO4)2 is 167.535 g/mol

Learn more about Molar Mass here: https://brainly.com/question/12127540

#SPJ4

Since deuterium has non-magnetic nuclei, which do not produce NMR signals, it is necessary to conduct NMR experiments using deteriorated solvents. If the solvent contains protons, the signal from the sample and the solvent will mix.

A large solvent signal that would otherwise appear in the proton NMR spectrum has been suppressed by using expensive deuterated solvents, which also makes locking and shimming easier.

Deuterium, an element that isotopically uses hydrogen and uses magnetic resonance imaging (NMR) as a solvent in imaging, is present in deuterium chloroform (CDCL3). The primary application for this substance without chemical alteration is in NMR spectrometers.

To know more about NMR visit:

https://brainly.com/question/17516931

#SPJ4

Chlorine has more valence electrons than P or Si, which causes its core 2s orbital to be closer to its nucleus.

Valence electrons are the electrons located in an atom's outermost energy level or shell. For instance, the oxygen molecule has six valence electrons, two of which are located in the 2s subshell and four in the 2p subshell.

For neutral atoms, the total number of valence electrons is the same as the total number of primary group electrons. Looking at an element's column in the periodic table will reveal its major group number. One member of group four, carbon, has four valence electrons.

To know more about valence electron visit:

https://brainly.com/question/28977387

#SPJ4

0.750 tsp of baking soda in grams would be  4.49 grams.

From the available information:

If, 1 tsp of baking soda = 0.211 oz, then 0.750 tsp of baking soda would be:

 0.750 x 0.211 = 0.15825 oz

Thus, 0.750 tsp of baking soda is equivalent to 0.15825 oz of baking soda.

If 1 oz = 28.35 grams, then 0.15825 oz of baking soda will be:

28.35 x 0.15825 = 4.49 grams

In other words, 0.750 tsp of baking soda would be worth 4.49 grams of baking soda going by the available conversion factors.

More on dimensional analysis can be found here: https://brainly.com/question/13078117

#SPJ1

The equation that is balanced for the synthesis reaction for the formation of sulfur dioxide (SO₂) is as follows: S + O₂ → SO₂ (option D).

A chemical reaction is a process typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A synthesis or combination reaction is a specific type of chemical reaction that involve two or more chemical species combining to form a more complex product:

A + B → AB

According to this question, sulfur combines with oxygen in a synthesis reaction to form sulfur dioxide as follows: S + O₂ → SO₂.

Learn more about synthesis reaction at: https://brainly.com/question/16987748

#SPJ1

The reaction for which delta H will be approximately (or exactly) equal to delta E is CH4(g) + 2O2(g) ---> CO2(g) + 2H2O(l).

Reaction is the process of responding to a stimulus or event. It can refer to a physical response, such as a reflex, or an emotional response, such as a feeling. Reactions can be conscious or unconscious, automatic or deliberate, and can occur in any living organism. In psychology, reactions are studied to understand how they shape behavior and to identify underlying mental processes. Reaction time, or the time it takes to respond to a stimulus, can also be measured and studied.

This is because this reaction is an exothermic reaction, which means that the energy released by the reaction is equal to the enthalpy change of the reaction.

To learn more about reaction
https://brainly.com/question/27300160
#SPJ4

2Ag[+](aq) + S[2-] -> Ag{2}S(s) is the net ionic equation for the precipitation reaction between silver nitrate solution and sodium sulfide solution.

An ionic equation is a chemical equation in which the electrolytes in aqueous solution are expressed as dissociated ions. It is similar to a molecular equation in which compounds are expressed as molecules. Chemical equations known as ionic equations only display the ions involved in a chemical reaction. Or, the ions that combine in a solution to react and create new substances. Those ions that don't take part are referred to as spectator ions. A chemical equation known as an ionic equation expresses the electrolytes in aqueous solution as dissociated ions. The ionic species are usually followed by (aq) in the equation to denote that they are in an aqueous solution, and this is typically a salt that has been dissolved in water.

Here,

The precipitation reaction between silver nitrate solution and sodium sulfide solution is represented by the net ionic equation 2Ag[+](aq) + S[2-] -> Ag{2}S(s).

To know more about ionic equation,

https://brainly.com/question/29299745

#SPJ4

Moles of carbon dioxide(co2) will you make only 0.0115 mol was produced.

we know the ideal gas equation,

PV = nRT

PV/RT=n

n=(1.04 atm)(1.00 L) /L atm (0.0821 )(1100 K) mol K

n=0.0115 moles of CO2.

The moles ofCaCO3 = 50.0 g/100.09 g/mol = 0.500 mol CaCO3 .If the reaction had gone to completion, 0.500 mol of CO2 would have been produced.  The two different experiments (one with 50.0 g of CaCO3 and one with 100.0 g of CaCO3) reached the same constant, final pressure of 1.04 atm.

Since increasing the amount of reactant did not produce more product, there is no way that all of the CaCO3 reacted. Instead, an equilibrium condition has been achieved and there must be some solid CaCO3 in the container.

To know more about moles here

https://brainly.com/question/15356425

#SPJ4

The number of moles in 7.52 × 10²² molecules of silicon dioxide is 0.125 moles.

The number of moles in a substance can be calculated by dividing the number of molecules by Avogadro's number as follows:

no of moles = no of molecules ÷ 6.02 × 10²³

According to this question, a sample of silica gel (SiO₂) contains 7.52 x 10²² molecules of silica. The number of moles can be calculated as follows:

no of moles = 7.52 × 10²² ÷ 6.02 × 10²³

no of moles = 1.249 × 10-¹

no of moles = 0.125moles

Therefore, 0.125 moles are present in 7.52 × 10²² molecules of silica.

Learn more about no of moles at: https://brainly.com/question/14919968

#SPJ1

The density of tetrahydrofuran needed for a chemistry student to do the experiment is 0.888 g/mL

Tetrahydrofuran has an ethereal smell and is visible as a transparent, colourless liquid. not as dense as water. 6 °F flash point Air is lighter than vapours.

Because it can dissolve different resins even at room temperature and is miscible with water and the majority of organic solvents, THF is frequently employed as a solvent for specialised resins such photosensitive resins. Additionally, it serves as a solvent for Wittig and Grignard processes.

Regardless of the sequence of introduction, if two compounds are totally soluble in one another, they are said to be miscible. Tetrahydrofuran (THF), for instance, and water mix well.

Learn more about tetrahydrofuran here:

brainly.com/question/28490343

#SPJ4

If you need to learn more about the exposure pathways, as well as the immediate and long-term impacts of exposure, when dealing with a chemical, Toxicological Information Section 11

Additionally possible symptoms include mortality, cyanosis, a headache, weakness, dizziness, shortness of breath, and cyanosis. Ingestion can irritate the digestive system and trigger nausea and vomiting. According to reports, DAAB can cause methemoglobinemia after being inhaled, ingested, or absorbed via the skin.

A branch of research known as toxicology aids in our understanding of the potentially hazardous consequences that certain materials, settings, and events may have on humans, animals, and the environment.

To know more about Toxicological visit:

https://brainly.com/question/14468004

#SPJ4

CBr4 < CH2Br2 < CF2Br2 < CF2Cl2 Polar molecules contain polar bonds and can be ordered from most to least polar based on the polarity of their bonds.

Polar bonds are chemical bonds between atoms in which the sharing of electrons is not equal. Polar bonds are caused by the difference in electronegativity between the two atoms involved in the bond. Electronegativity is the measure of an atom's ability to attract electrons to itself.

CBr4 has the most polar bond and is therefore the most polar molecule. CH2Br2 has the second most polar bond, followed by CF2Br2, and then CF2Cl2 with the least polar bond.

To learn more about polar bonds
https://brainly.com/question/2615067
#SPJ4

The pH at one half the equivalence point and at the equivalence point for a titration 8.716.

Titration is a method of chemical analysis where the quantity of a sample's constituents is determined by adding a precisely measured amount of a different substance to which the desired constituent will react in a specific, known proportion.

The equivalence point, or the point at which chemically equivalent amounts of the reactants have been combined, is to be detected by the titration. The stoichiometry of the reaction determines how many reactants have been combined at the equivalence point.

To know more about titration visit-

https://brainly.com/question/30046193

#SPJ4

The structures in option A and D correctly represents structure of cis-1,3-dimethyl cyclohexane.

There are three stable conformations of cyclohexane. Chair, boat, and twist boat are them. The chair conformation is the most stable of the three. Each carbon atom in the cyclohexane's boat shape has two different sorts of groups. Both axial and equatorial groups describe them. From the provided boat conformations, we should determine the cis conformations.

Two substituents are in up, up (or) down, down to each other in boat conformation if they are cis to one another. Two substituents are in up, down, or down, up to each other in boat conformation if they are trans to one another.

In boat conformation A, both methyl groups are in up direction.

In boat conformation-B and C, one methyl group is in up direction and other one is in down direction.

In boat conformation D, both methyl groups are in down direction.

To know more about conformations, visit:

brainly.com/question/14169188

#SPJ4

The complete question is as follows :

For cis-1,3-dimethylcyclohexane, which structures represent the possible boat conformations?- a- b- c- d:

The molecular geometry around the central atom of each of the following species: For CF₄ is tetrahedral, for NCl₃ is trigonal pyramid, for SO₂ is bent,  Si₂H₆ is tetrahedral, and for  (NH₂)₂CO is trigonal planar.

The three-dimensional arrangement of atoms in a molecule is known as molecular geometry, also referred to as the molecular structure. Understanding a compound's molecular structure can be useful in identifying its polarity, reactivity, phase of matter, color, magnetism, and biological activity.

A molecule's three-dimensional shape in space is known as its molecular geometry. The surrounding atoms and electron pairs as well as the central atom influence it. Using the Valence Shell Electron Pair Repulsion (VSEPR) method, the shape of the majority of molecules can be predicted.

To know more about molecular geometry visit:

https://brainly.com/question/7558603

#SPJ4

NiSO4: The answer you gave is accurate. In an ion symbol, the number component of the charge is often written first. • CrS compound.

It is a salt made up of the weak acid H2CO3 and the strong base Ca(OH). Chalk, or CaCO3, does not function like a base since it does not dissolve in water. Use the app to access an endless number of solutions.

Spherocobaltite, sometimes referred to as cobalt carbonate, is a mineral with the chemical formula CoCO3. It is cobalt's carbonate salt. When melted, it produces red trigonal flakes with a specific gravity of 4.13 that disintegrate. Cold or warm water does not dissolve cobalt carbonate, but acids can.

To know more about carbonate visit:

https://brainly.com/question/21809057

#SPJ4

By dilution, 275 mL or 0.0224 MgF2 solution can be created from 69.4 mL of 0.0887 MgF2 solution.

By adding extra more solvent, such as water, to the solution, dilution is indeed the process of "reducing the concentration of the solute in a solution." A solution is diluted by adding additional solvent without also adding more solute.

An approach used frequently to achieve this concentration reduction is serial dilution. diluted homeopathy. An equation called "dilution" can be used to determine how quickly a gas diluted. A sort of unauthorized trademark usage outside the relevant market is trademark dilution.

To know more about dilution visit:

https://brainly.com/question/28997625

#SPJ4

The advice cited above would not be applicable in this situation because benzoic acid is not a corrosive material.

Material is any object or substance that is used to create something else. It is a physical substance that can be manipulated and transformed in some way to make it useful. Materials can be natural, such as wood, stone, and metal, or they can be synthetic, such as plastic, fabric, or rubber. Depending on the purpose, materials can range from strong and durable to soft and flexible. In the construction industry, materials are chosen for their strength, durability, and cost-effectiveness. In manufacturing, materials are chosen for their ability to be formed and shaped into the desired product. In the arts, materials are chosen for their aesthetic properties and potential to create something unique and visually stimulating.

A more appropriate response would be to thoroughly wash the affected area with soap and water and seek medical attention if irritation or pain persists.

To learn more about material
https://brainly.com/question/29783874
#SPJ4

Water and toluene are not miscible, the formula of toluene is  (d) C₆H₅CH₃.

Toluene, a substituted aromatic hydrocarbon, is also known as toluol. It is an insoluble in water odorless liquid with the characteristic odor of paint thinners.

It is a phenyl group connected to a methyl group and is a mono-substituted benzene derivative (CH3). Benzene is the parent of the chemical. The IUPAC has referred to it as "methylbenzene" as a result. Toluene is largely used in the industrial sector as a feedstock and a solvent.

Because of their polarity and functional group pressure, the other options are soluble, making option D the correct response.

To know more about Toluene, refer

https://brainly.com/question/8696404

#SPJ4

Which two functional groups would be created by the ozonolysis of molecule a Me2C = CHMe produces aldehydes and ketones during ozonolysis, providing all the other alternatives no aldehydes.

To cleave those unsaturated bonds in alkenes, alkynes, etc azo compounds, ozone is used in the organic chemical process known as ozonolysis.

Pentane will occur from the reaction, for instance, between bromoethane and I-bromopropane. When each of the participants in the reaction reacts on their own, butane will also be produced. For instance, 1-bromopropane produces hexane, while bromoethane produces butane.

To know more about ozonolysis visit:

https://brainly.com/question/13580842

#SPJ4

Uranium-238, Uranium-235, and Potassium-40 isotopes are better than Carbon-14 to find the age of artifacts from millions of years ago because they have longer half-lives.

The half-life of Carbon-14 is only about 5,730 years, making it useful for dating materials that are only up to around 60,000 years old. In contrast, the half-life of Uranium-238 is about 4.5 billion years, and the half-life of Uranium-235 is about 704 million years, making them useful for dating materials that are much older. Potassium-40 has a half-life of 1.25 billion years. This means that these isotopes are still present in much older samples, and can be used to accurately determine the age of materials from millions of years ago.

Learn more about isotopes here:

https://brainly.com/question/12955625

#SPJ4

The remaining mass of 28 grams of a radioactive element whose half life is 20 year. The initial mass remains after 100 years is 0.875 grams

The radioactive substance weighs 28 grams at first. The radioactive element has a half-life of 20 years. After t years, the mass y(in grams) that is left is calculated using the equation below

y=28(1/2)^t/20 ,t ≥ 0

Consequently, the quantity of initial mass that is still present after 100 years would be

y=28(1/2)^t/20 ,t ≥ 0

y=28(1/2)^100/20

y=28(1/2)⁵

y = 0.875 grams of the initial mass remain

Therefore, after 100 years, there will still be 22.0.875 grams of the starting mass.

Your question is incomplete but most probably your full question attached below

Learn more about radioactive element at https://brainly.com/question/23759636

#SPJ4

The 15s of the reaction saw 0.0153 moles of Br2 being produced.

Relational Equation

H2 + Br2 > 2HBr

According to the reaction's equation, [HBr] = [H2] + [Br2] = -1/2 [HBr]/[t]

The amount of HBr decreased from 0.520M to 0.486M in the initial 25 seconds of the reaction.

Average Rate of Reaction Rate =-1/2 ([HBr]f- [HBr]t/i

Rate = -1/2 (0.486-0.52/2)

Rate: 0.00068 M/s

0.00068M/s is the reaction's average rate.

Rate of the response is

Rate= [Br2]/t 0.00068= [Br2]/15 Br2= 0.00068 15= 0.0102M

In the reaction, Br2 is present in 0.0102M concentration.

Number of Moles The amount of Br2 produced in the first 15 seconds can be determined using the formula: Number of moles=molarity×volume, where n = 0.0102 and 15 = 0.0153 mol.

0.0153 moles of Br2 were created in the reaction, according to the calculations above.

For more information on rate of reaction kindly visit to

https://brainly.com/question/2985000

#SPJ4

The correct statement that are exothermic is energy associated with the formation of water-ion interaction.

An exothermic reaction is the one during which system releases energy and during an endothermic reaction system absorbs energy.

Option 1  is incorrect as water molecules do not undergo ionization when added to water and thus no energy is released.

Option 2 is incorrect because the separation LiCl into subsequent ions requires a significant amount of energy and thus it will be a endothermic reaction.

Option 3 is correct as the formation of water ion releases a large amount of energy and thus it is an endothermic reaction.

Option 4 is also correct as it is the energy associated with the whole system.

To learn more about ions click here:

https://brainly.com/question/13692734

#SPJ4