For this assignment, you will create flowchart using Flowgorithm and Pseudocode for the following program example:
Hunter Cell Phone Company charges customer's a basic rate of $5 per month to send text messages. Additional rates apply as such:
The first 60 messages per month are included in the basic bill
An additional 10 cents is charged for each text message after the 60th message and up to 200 messages.
An additional 25 cents is charged for each text after the 200th message
Federal, state, and local taxes add a total of 12% to each billThe company wants a program that will accept customer's name and the number of text messages sent. The program should display the customer's name and the total end of the month bill before and after taxes are added.
Answers
Answer:
The pseudocode is as given below in the explanation while the flow diagram is attached herewith
Explanation:
The pseudocode is as follows
input cust_name, num_texts
Set Main_bill=5 $;
if the num_texts is less than or equal to 60
Excess_Charge=0;
If the num_texts is greater than 60 and less than or equal to 200
num_text60200 =num_texts-60;
Excess_Charge=0.1*(num_text60200);
else If the num_texts is greater than 60
num_texts200 =num_texts-200;
Excess_Charge=0.25*(num_texts200)+0.1*(200-60);
Display cust_Name
Total_Bill=Main_bill+Excess_Charge;
Total_Bill_after_Tax=Total_Bill*1.12;
Related Questions
The following numbers are inserted into a linked list in this order:
10, 20, 30, 40, 50, 60
What would the following statements display?
pCur = head->next;
cout << pCur->data << " ";
cout << pCur->next->data << endl;
a) 20 30
b) 40 50
c) 10 20
d) 30 40
Answers
Answer:
A. 20 30
Explanation:
Given
Linked list: 10, 20, 30, 40, 50, 60
Required
The output of the following code segment
pCur = head->next;
cout << pCur->data << " ";
cout << pCur->next->data << endl;
A linked list operates by the use of nodes which begins from the head to the next node, to the next, till it reaches the last;
The first line of the code segment; "pCur = head->next; " shifts the node from the head to the next node
The head node is the node at index 0 and that is 10;
This means that the focus has been shifted to the next at index 1 and that is 20;
So, pCur = 20
The next line of the code segment; cout << pCur->data << " "; prints pCur and a blank space
i.e. "20 " [Take note of the blank space after 20]
The last line "cout << pCur->next->data << endl; " contains two instructions which are
1. pCur = next->data;
2. cout<<pCur->data;
(1) shifts focus to the next node after 20 ; This gives pCur = 30
(2) prints the value of pCur
Hence, the output of the code segment is 20 30
Write a function called unzip that takes as parameter a sequence (list or tuple) called seq of tuples with two elements. The function must return a tuple where the first element is a list with the first members of the seq tuple and the second element is a list with the second members of the seq tuple.
This example clarifies what is required:
Ist =[(1, "one"), (2, "two"), (3, "three")]
tup= unzip(Lst) lst tup
print(tup)
#prints ([1, 2, 3], ['one', two','three'7)
Answers
Answer:
Here is the function unzip:
def unzip(lst):
result= zip(*lst)
return list(result)
The complete program in Python is given below:
def unzip(lst):
result= zip(*lst)
return list(result)
lst =[(1, "one"), (2, "two"), (3, "three")]
tup= unzip(lst)
print(tup)
Explanation:
Here zip() function is used in the unzip function. The return type of zip() function is a zip object. This means the function returns the iterator of tuples. This function can be used as its own inverse by using the * operator.
If you do not want to use zip() function then the above program can also be implemented as following which uses a for loop for elements in the given list (lst). This can make a pair of lists (2 tuple) instead of list of tuples:
def unzip(lst):
output = ([ a for a,b in lst ], [ b for a,b in lst ])
return output
lst =[(1, "one"), (2, "two"), (3, "three")]
tup= unzip(lst)
print(tup)
The programs along with their output are attached.
Type a statement using srand() to seed random number generation using variable seedVal. Then type two statements using rand() to print two random integers between (and including) 0 and 9. End with a newline. Ex: 5 7 Note: For this activity, using one statement may yield different output (due to the compiler calling rand() in a different order). Use two statements for this activity. Also, after calling srand() once, do not call srand() again. (Notes)
GIVEN:
#include
#include // Enables use of rand()
#include // Enables use of time()
int main(void) {
int seedVal = 0;
/* Your solution goes here */
return 0;
}
2). Type two statements that use rand() to print 2 random integers between (and including) 100 and 149. End with a newline. Ex:
101
133
Note: For this activity, using one statement may yield different output (due to the compiler calling rand() in a different order). Use two statements for this activity. Also, srand() has already been called; do not call srand() again.
GIVEN:
#include
#include // Enables use of rand()
#include // Enables use of time()
int main(void) {
int seedVal = 0;
seedVal = 4;
srand(seedVal);
/* Your solution goes here */
return 0;
}
Answers
Answer:
1. The solution to question 1 is as follows;
srand(seedVal);
cout<<rand()%10<<endl;
cout<<rand()%10<<endl;
2. The solution to question 2 is as follows
cout<<100+rand()%50 <<endl;
cout<<100+rand()%50 <<endl;
Explanation:
The general syntax to generate random number between interval is
Random Number = Lower Limit + rand() % (Upper Limit - Lower Limit + 1)
In 1;
The solution starts by calling srand(seedVal);
The next two statements is explained as follows
To print two random integers between intervals of 0 and 9 using rand()"
Here, the lower limit = 0
the upper limit = 9
By substituting these values in the formula above; the random number will be generated as thus;
Random Number = 0 + rand() % (9 - 0 + 1)
Random Number = 0 + rand() % (10)
Random Number = rand() % (10)
So, the instruction to generate the two random variables is rand() % (10)
2.
Similar to 1 above
To print two random integers between intervals of 100 and 149 using rand()"
Here, the lower limit = 100
upper limit = 149
By substituting these values in the formula above; the random number will be generated as thus;
Random Number = 100 + rand() % (149 - 100 + 1)
Random Number = 100 + rand() % (50)
So, the instruction to generate the two random variables is 100 + rand() % (50)
Which of the following is true about operating system.
a. acts as an intermediary between the computer user and the computer hardware.
b. program that manages the computer hardware.
c. provides a basis for application progra
Answers
Answer:
google kis kam ka hai us se puch lo
Write a program that asks the user to enter either an "African" or a "European" swallow. The programâs behaviour should mimic the program below. If the user enters something øther than "African" or "European", the program shøuld insult the user like the example below.
Sample Output #1:
What kind of swallow?
African
Yes, it could grip it by the husk.
Sample Output #2:
What kind of swallow?
European
A five-ounce bird could not carry a one-pound coconut.
Sample Output #3:
What kind of swallow?
Spanish
You really are not fit to be a king.
Answers
Answer:
The programming language is not stater; However, I'll answer this question using C++.
This program does not use comments (See explanation)
See Attachment for program file
Program starts here
#include <iostream>
using namespace std;
int main()
{
string response;
cout<<"What kind of swallow?\n";
cin>>response;
for(int i =0; i<response.length();i++)
{
response[i]=toupper(response[i]);
}
if(response == "AFRICAN")
{
cout<<"Yes, it could grip it by the husk.";
}
else if(response == "EUROPEAN")
{
cout<<"A five-ounce bird could not carry a one-pound coconut.";
}
else
{
cout<<"You really are not fit to be a king.";
}
return 0;
}
Explanation:
string response; -> A string variable to hold user input is declared
cout<<"What kind of swallow?\n"; -> prompts user for input
cin>>response; -> user input is stored here
The following iteration converts user input to uppercase; so that the program will work for inputs like African, AFRICAN, AFriCAN, etc.
for(int i =0; i<response.length();i++)
{
response[i]=toupper(response[i]);
}
The following if statement prints "Yes, it could grip it by the husk." if user input is AFRICAN
if(response == "AFRICAN")
{
cout<<"Yes, it could grip it by the husk.";
}
Otherwise, if user input is EUROPEAN, it prints; "A five-ounce bird could not carry a one-pound coconut."
else if(response == "EUROPEAN")
{
cout<<"A five-ounce bird could not carry a one-pound coconut.";
}
Lastly; for every inputs different from AFRICAN and EUROPEAN, the program displays "You really are not fit to be a king."
else
{
cout<<"You really are not fit to be a king.";
}
Charles Montesquieu believed that the
Legislative Branch should do what?
A. Make laws
B. Enforce laws
C. Interpret laws
elles sone. All Rights Resed.
Answers
Answer:
A. Make Laws
Explanation:
Montesquieu believed the ways to go about limiting the power of a monarch would be to split up power among 3 groups, Judicial, Legislative and Executive. The American Presidential system and Constitution used Montesquieu's writings as a foundation for their principles.
Judicial Interprets lawsLegislative Makes lawsExecutive Enforces LawWrite a program that lets the Michigan Popcorn Company keep track of their sales for seven different types of popcorn they produce: plain, butter, caramel, cheese, chocolate, turtle and zebra. It should use two parallel seven-element arrays: an array of strings that holds the seven popcorn names and an array of integers that holds the number of bags of popcorn sold during the past month for each popcorn flavor. The names should be stored using an initialization list at the time the flavors array is created. The program should prompt the user to enter the number of bags sold for each flavor. Once the popcorn data has been entered, the program should produce a report for each popcorn type, total sales, and the names of the highest selling and lowest selling products. Be sure to include comments throughout your code where appropriate. Complete the C++ code using Visual Studio or Xcode, compress (zip) and upload the entire project folder to the Blackboard assignment area by clicking on the Browse My Computer button or by dragging the file inside the Attach Files box g
Answers
Answer:
#include <iostream>using namespace std;int main(){ // declare and initialize popcorn name array string popcorn_name[7] = {"plain", "butter", "caramel", "cheese", "chocolate", "turtle", "zebra"}; // declare and initialize sales array with 7 elements int sales[7]; // A loop to prompt user to enter sales for each popcorn for(int i=0; i < 7; i++){ cout<<"Enter number of sales for " + popcorn_name[i] + " :"; cin>>sales[i]; } // Find maximum sales int max = sales[0]; int maxIndex = 0; for(int j=1; j < 7; j++){ if(max < sales[j]){ max = sales[j]; maxIndex = j; } } // Find minimum sales int min = sales[0]; int minIndex = 0; for(int k=1; k < 7; k++){ if(min > sales[k]){ min = sales[k]; minIndex = k; } } // Print popcorn name and sales for(int l=0; l < 7 ; l++){ cout<<popcorn_name[l]<<"\n"; cout<<"Sales: "<< sales[l]<<"\n\n"; } // Print popcorn name with maximum and minimum sales cout<<"Highest selling: "<< popcorn_name[maxIndex]<<"\n"; cout<<"Lowest selling: "<<popcorn_name[minIndex]<<"\n"; return 0;}Explanation:
Create two arrays to hold the list of popcorn name and their sales (Line 5-8). Next prompt user to input the sales for each popcorn (Line 10-14). Get the maximum sales of the popcorn (Line 17-24) and minimum sales (Line 27-34). Print the popcorn name and sales (Line 37-40) and the popcorn name with highest and lowest selling (Line 43-44).
When implementing a physical database from a logical data model, you must consider database performance by allowing data in the database to be accessed more rapidly. In order to increase data availability, the DBA may break up data that are accessed together to be stored together. Which method will improve the performance of this structure when running queries? What are advantages and disadvantages of this method?
Answers
Answer:
A method used to improve the performance of structure when running queries is known as Partitioning indexes.
The advantages of partitioning indexes are, It enables data management operations for example, index creation and rebuilding, It increases query performance.
The disadvantages are, one cannot define the primary index of partitioned table to be unique unless the whole partitioning column set is part of the primary index definition.
Explanation:
Solution
Partitioning indexes are known as b -tress indexes that shows hon how to break up the index into separate or different partitions.
Partitioning is usually done to enhance the performance and increased availability. when data are spread over multiple partitions, one can be able to operate on one partition without affecting others. i.e to run utilities, or to take data offline.
Almost all DBMS products support partitioning, but in various ways. we must be sure to know the nuances of an individual a particular DBMS execution before partitioning.
The advantages of Partitioned indexes are as follows:
It enables data management operations for example, index creation and rebuilding
It increases performance of query
It can significantly the impact of schedule downtime for maintenance operations
Disadvantages:
The primary index of partitioned table cannot be described to be unique except if the whole partitioning column set is part of the primary index definition.
Consider a recurrent neural network that listens to a audio speech sample, and classifies it according to whose voice it is. What network architecture is the best fit for this problem
Answers
Answer:
Many-to-one (multiple inputs, single output)
Explanation:
Solution
In the case of a recurrent neural network that listens to a audio speech sample, and classifies it according to whose voice it is, the RNN will listen to the audio and will give result by doing classification.
There will be a single output, for the classified or say identified person.
The RNN will take a stream of input as the input is a audio speech sample.
Therefore, there will be multiple inputs to the RNN and a single output, making the best fit Architecture to be of type Many-to-one(multiple inputs, single output).
C++ Problem: In the bin packing problem, items of different weights (or sizes) must be packed into a finite number of bins each with the capacity C in a way that minimizes the number of bins used. The decision version of the bin packing problem (deciding if objects will fit into <= k bins) is NPcomplete. There is no known polynomial time algorithm to solve the optimization version of the bin packing problem. In this homework you will be examining three greedy approximation algorithms to solve the bin packing problem.
- First-Fit: Put each item as you come to it into the first (earliest opened) bin into which it fits. If there is no available bin then open a new bin.
- First-Fit-Decreasing: First sort the items in decreasing order by size, then use First-Fit on the resulting list.
- Best Fit: Place the items in the order in which they arrive. Place the next item into the bin which will leave the least room left over after the item is placed in the bin. If it does not fit in any bin, start a new bin.
Implement the algorithms in C++. Your program named bins.cpp should read in a text file named bin.txt with multiple test cases as explained below and output to the terminal the number of bins each algorithm calculated for each test case. Example bin.txt: The first line is the number of test cases, followed by the capacity of bins for that test case, the number of items and then the weight of each item. You can assume that the weight of an item does not exceed the capacity of a bin for that problem.
3
10
6
5 10 2 5 4 4
10
20
4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6
10
4
3 8 2 7
Sample output: Test Case 1 First Fit: 4, First Fit Decreasing: 3, Best Fit: 4
Test Case 2 First Fit: 15, First Fit Decreasing: 10, Best Fit: 15
Test Case 3 First Fit: 3, First Fit Decreasing: 2, Best Fit: 2
Answers
xekksksksksgBcjqixjdaj
Describe and list advantages and disadvantages of each of the following backup types:
full, differential, incremental, selective, CPD, and cloud.
Answers
Answer:
Full back up
It creates complete copy of the source of data. This feature made it to the best back up with good speed of recovery of the data and simplicity.However, because it is needed for backing up of a lot of data, it is time consuming process,Besides it also disturbs the routine application of the technologist infrastructure. In addition large capacity storage is needed for the storage of the large volume of back up with each new creation.
Incremental back up: back up work at high speed thus saves time, Little storage capacity is needed. This type of back up can be run as many time as wished.
However, the restoration of data takes time, due to the time spent for restoration of initial back up and the incremental.
Differential Back up has very fast back up operation, because it only requires two pieces of back up.This is however slower compare to the Incremental.
The selective back up enable selection of certain type of file or folders for back up.
it can only be used to back up folders only when important data are needed only.Thus the storage capacity is low.
CPD eliminates back up window and reduces the recovery point objective.However, it has issue of compatibility with the resources to back up.,it is also expensive because its solutions are disk based.
Cloud based is affordable and save cost,It is easier to access. it is efficient,it can be access remotely for convenience.
However, Internet sources and some bandwidth must be available for access., always depends on third party providers,There is also problems encountered when switching providers.
Explanation:
Which of the following statements about CASE is not true?CASE tools provide automated graphics facilities for producing charts.CASE tools reduce the need for end user participation in systems development.CASE tools have capabilities for validating design diagrams and specifications.CASE tools support collaboration among team members.CASE tools facilitate the creation of clear documentation
Answers
Answer:
CASE tools reduce the need for end user participation in systems development.
Explanation:
CASE is an acronym for Computer-aided Software Engineering and it comprises of software application tools that provide users with automated assistance for Software Development Life Cycle (planning, analysing, designing, testing, implementation and maintenance). The CASE tools helps software developers in reducing or cutting down of the cost and time of software development, as well as the enhancement of the software quality.
Some other benefits of using the CASE tools are;
- CASE tools provide automated graphics facilities for producing charts.
- CASE tools have capabilities for validating design diagrams and specifications.
- CASE tools support collaboration among team members.
- CASE tools facilitate the creation of clear documentation.
- CASE tools checks for consistency, syntax errors and completeness.
The CASE tools can be grouped as, requirement and structure analysis, software design, test-case and code generation, reverse engineering, and document production tools.
Examples of CASE tools are flowchart maker, visible analyst (VA), dreamweaver, net-beans, microsoft visio, adobe illustrator and photoshop etc.
A new operating system uses passwords that consist of three characters. Each character must be a digit between 0 and 9. For example, three distinct possible passwords are 123, 416, and 999. The system uses 32-bit salt values. The system also allows one login attempt every second and never locks out users regardless of how many failed attempts occur. If an adversary has obtained a copy of the password file and conducts an offline brute-force attack by trying every password combination until the adversary obtains username and password combination. The use of a 32-bit salt value
Answers
Answer:
Brute force is technique that is used for cracking password
In this case the system uses only three characters(0-9). By applying Brute force attack in "hit and try" manner we easily crack the password.
Explanation:
Solution
There are a wide variety of password cracking mechanisms.Brute force is one of the popular password cracking technique.Brute force attack is generally used to crack small passwords.
In the given example the system uses only three characters(0-9).By using Brute force attack in "hit and try" manner we easily crack the password.There are only 10 possible passwords for this type of system.Because we can arrange 0-9 only in 10 ways.But for Systems with long passwords it is difficult to find it in hit and try manner.But instead of having plain password each password have a random salt value.
In a system of 32 bit salt value there are 2^32 different key values.
By increasing the salt value from 32 bits to 64 bits there are 2^64 different key values.It increases the time taken to crack a password for an attacker.so by changing salt value from 32 to 64 bits will make it more harder for the adversary's attack to be successful.
What program is best for teaching young people code?
Answers
web pages with personal or biograpic information are called
Answers
Answer:
Web pages with personal or biographic information are called. a. Social Networking sites. c.
Explanation:
1. Implement the function dict_intersect, which takes two dictionaries as parameters d1 and d2, and returns a new dictionary which contains only those keys which appear in both d1 and d2, whose values are a tuple of the corresponding values from d1 and d2.
E.g., dict_intersect({'a': 'apple', 'b': 'banana'}, {'b': 'bee', 'c': 'cat'}) should return {'b': ('banana', 'bee')}
2. Implement the function consolidate, which accepts zero or more sequences in the star parameter seqs, and returns a dictionary whose keys consist of values found in those sequences, which in turn map to numbers indicating how many times each value appears across all the sequences.
E.g., consolidate([1,2,3], [1,1,1], [2,4], [1]) should return the dictionary {1: 5, 2: 2, 3: 1, 4: 1}.
Answers
Answer:
1
def dict_intersect(d1,d2): #create dictionary
d3={} #dictionaries
for key1,value1 in d1.items(): #iterate through the loop
if key1 in d2: #checking condition
d3[key1]=(d1[key1],d2[key1]) #add the items into the dictionary
return d 3
print(dict_intersect({'a': 'apple', 'b': 'banana'}, {'b': 'bee', 'c': 'cat'})) #display
2
def consolidate(*l1): #create consolidate
d3={} # create dictionary
for k in l1: #iterate through the loop
for number in k: #iterate through the loop d3[number]=d3.get(number,0)+1 #increment the value
return d 3 #return
print(consolidate([1,2,3], [1,1,1], [2,4], [1])) #display
Explanation:
1
Following are the description of program
Create a dictionary i.e"dict_intersect(d1,d2) " in this dictionary created a dictionary d3 .After that iterated the loop and check the condition .If the condition is true then add the items into the dictionary and return the dictionary d3 .Finally print them that are specified in the given question .2
Following are the description of program
Create a dictionary consolidate inside that created a dictionary "d3" .After that iterated the loop outer as well as inner loop and increment the value of items .Return the d3 dictionary and print the dictionary as specified in the given question .
Larry sees someone he finds annoying walking toward him. Larry purposely looks away and tries to engage in conversation with someone else. Which type of eye behavior is Larry using?
a. mutual lookingb. one-sided lookingc. gaze aversiond. civil inattentione. staring
Answers
Answer:
one-sided looking
Explanation:
Larry purposely looks away
Use a one-dimensional array to solve the following problem: A company pays its salespeople on a commission basis. The salespeople receive $200 per week plus 9% of their gross sales for that week. For example, a salesperson who grosses $5,000 in sales in a week receives $200 plus 9% of $5,000, or a total of $650. Write an app (using an array of counters) that determines how many of the salespeople earned salaries in each of the following ranges (assume that each salesperson's salary is an integer). a) $200–299
b) $300–399
c) $400–499
d) $500–599
e) $600–699
f) $700–799
g) $800–899
h) $900–999
i) $1000 and over
Summarize the results in tabular format.
Answers
Answer: Provided in the explanation section
Explanation:
import java.util.Scanner;
public class commission
{
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
int totals[]={0,0,0,0,0,0,0,0,0};
int n,sales,i,index;
double salary;
System.out.print("how many salesmen do you have? ");
n=input.nextInt();
for(i=1;i<=n;i++)
{System.out.print("Salesman "+i+" enter sales: ");
sales=input.nextInt();
salary=200+(int)(.09*sales);
System.out.printf("Salary=$%.2f\n",salary);
index=(int)salary/100-2;
if(index>8)
index=8;
totals[index]++;
}
System.out.println("SUMMARY\nSALES\t\tCOUNT");
for(i=0;i<8;i++)
System.out.println("$"+(i*100+200)+"-"+(i*100+299)+"\t"+totals[i]);
System.out.println("$1000 and over\t"+totals[i]);
}
}
cheers i hope this helped !!
TCPDump is used by Wireshark to capture packets while Wireshark own function is:
a. to provide a graphical user interface (GUI) and several capture filters.
b. to act as an intrusion prevention system (IPS) by stopping packets from a black-listed website or packets with payloads of viruses.
c. to defend the network against TCP SYN Flooding attacks by filtering out unnecessary TCP packets.
d. yet to be defined.
Answers
Answer:
a. to provide a graphical user interface (GUI) and several capture filters
Explanation:
TcPDump is a command line tool used to capture packets. TcPDump is used to filter packets after a capture has been done. To control network interfaces, TcPDump need to be assigned root privileges. Data is represented in form of text
Wireshark provide a graphical user interface (GUI) and several capture filters. It is a graphical tool used in packet capture analysis. Data is represented in wireshark as text in boxes.
what is computer aided design
Answers
Three examples of parameter-parsing implementation models are: (1)________, (2)________, and (3)________.
Answers
Answer:1) Parse-by-value
2) Parse-by-reference
3) Parse-by-name
Explanation: Parameter parsing refers to a communication among procedures or functions.
The values of a variable procedure are transferred to the called procedure by some mechanisms. Different techniques of parameter-parsing include; parse-by-value, parse-by-reference, parse-by-copy restore, parse-by-name.
Consider that a large online company that provides a widely used search engine, social network, and/or news service is considering banning ads for the following products and services from its site: e-cigarettes, abortion clinics, ice cream, and sugared soft drinks. Which, if any, do you think they should ban? Give reasons. In particular, if you select some but not all, explain the criteria for distinguishing.
Answers
Answer:
I think that they should ban ads for all four products. These products, e-cigarettes, abortion clinics, ice cream, and sugared soft drinks, are all discreet adult products that should not be advertised because of their health hazards. Since the "large online company provides a widely used search engine, social network, and/or news service, which are mainly patronized by younger people, such ads that promote products injurious to individual health should be banned. Those who really need or want these products know where they could get them. Therefore, the products should not be made easily accessible to all people. Nor, should ads promote their patronage among the general population.
Explanation:
Advertisements create lasting and powerful images which glamourize some products, thereby causing the general population, especially children, to want to consume them without any discrimination of their health implications. If online banning is then contemplated, there should not be any distinguishing among the four products: e-cigarettes, abortion clinics, ice cream, and sugared soft drinks.
random integer between 3 and 13 (inclusive)
Answers
Answer:
6
Explanation:
Answer:
4
Explanation:
It is between 3 and 13. Please answer some of my questions too! :)
Write a Java program that reads from the user four grades between 0 and 100. The program the, on separate ines, prints out the entered grades followed by the highest grade, lowest grade, and averages of all four grades. Make sure to properly label your output. Use escape characters to line up the outputs after the labels.
Answers
Answer:
import java.util.*;
public class Grade {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
double[] grades = new double[4];
for (int i=0; i<4; i++){
System.out.print("Enter a grade: ");
grades[i] = input.nextDouble();
}
double lowest = grades[0];
double highest = grades[0];
double total = 0;
for (int i=0; i<4; i++){
System.out.println("Grade " + (i+1) + " is: " + grades[i]);
if(grades[i] >= highest)
highest = grades[i];
if(grades[i] <= lowest)
lowest = grades[i];
total += grades[i];
}
double average = total/4;
System.out.println("The highest grade is: " + highest);
System.out.println("The lowest grade is: " + lowest);
System.out.println("The average is: " + average);
}
}
Explanation:
Ask the user for the grades and put them in the grades array using a for loop
Create another for loop. Inside the loop, print the grades. Find highest and lowest grades in the grades array using if-structure. Also, add each grade to the total.
When the loop is done, calculate the average, divide the total by 4.
Print the highest grade, lowest grade and average.
Write a program that reads a list of words. Then, the program outputs those words and their frequencies. Ex: If the input is: hey hi Mark hi mark the output is: hey 1 hi 2 Mark 1 hi 2 mark 1
Answers
Answer:
#Declare variable to get the input
#list from the user
input_list = input()
#split the list into words by space
list = input_list.split()
#Begin for-loop to iterate each word
#to get the word frequency
for word in list:
#get the frequency for each word
frequency=list.count(word)
#print word and frequency
print(word,frequency)
Explanation:
This program that we are told to write will be done by using python programming language/ High-level programming language.
The question wants us to write a program in which the output will be as below;
hey 1
hi 2
Mark 1
hi 2
mark 1
Just by imputing hey hi mark hi mark.
Just copy and run the code below.
#Declare variable to get the input
#list from the user
input_list = input()
#split the list into words by space
list = input_list.split()
#Begin for-loop to iterate each word
#to get the word frequency
for word in list:
#get the frequency for each word
frequency=list.count(word)
#print word and frequency
print(word,frequency)
In this exercise we have to use the knowledge in computational language in python to write the following code:
We have the code can be found in the attached image.
So in an easier way we have that the code is
input_list = input()
list = input_list.split()
for word in list:
frequency=list.count(word)
print(word,frequency)
See more about python at brainly.com/question/18502436
A vSphere Administrator is receiving complaints a database VM is experiencing performance issues. The VM is a member of the high priority resource pool and the cluster has not experienced contention.
Which condition should be checked to address immediate performance concerns?
A. VM snapshots
B. VMFS version
C. Resource Pool share value
D. Configured CPU shares
Answers
Answer:
C. Resource Pool share value.
Explanation:
The vSphere is a term used to describe the VMware’s virtualization cloud platform. The vSphere comprises of the following, vCenter Server, ESXi, Virtual Machine File System (VMFS) and vCenter Client.
If a vSphere Administrator receive complaints that a database Virtual Machine (VM) is experiencing performance issues and the Virtual Machine (VM) is a member of the high priority resource pool and the cluster has not experienced contention.
In order to address immediate performance concerns, the vSphere Administrator should check the Resource Pool share value.
VMware resource pool refers to the aggregated central processing unit and memory allocated to a Virtual Machine (VM) for flexible management of the resources.
Also, the vSphere Administrator should install VMware tools to check which processes are having high CPU usage by using vimtop, as well as checking if vCenter Server is swapping.
The following if statement uses an overloaded > operator to determine whether the price of a Car object is more than $5000. Car is a struct and myCar is an object of Car. Each Cor object has two variables: id (int) and price (float). As you can see in the following code, the ID of myCar is 12345 and the price is $6,000. Car myCar - [12345, 6000.); float price - 5000; if (myCar > price) cout << "My car price is more than $5,000/n": Which one of the following function prototypes is correct syntax to overload the > operator based on the if statement above. void operator> float price: O bool operator>(Car & car, float price): bool operator (float amt): bool operator> Car & your Car): None of the above
Answers
Answer:
The correct syntax to overload is bool operator (float amt): so, the third statement is right.
Explanation:
Solution
From the given question we have to find which statements is correct for the following function prototype.
Now,
Since the price of a Car object is above $5000, the car here is considered a struct and myCar is an object of Car
Both Car object consists of two variables which are id (int) and price (float)
Thus, from the given example the corresponding code says that the ID of myCar is represented as follows:
myCar - [12345, 6000);
The float price = 5000
Then,
cout << "My car price is more than $5,000/n"
Therefore the following statement bool operator (float amt): is the right syntax to overload.
What is a manifold on a vehicle
Answers
Answer:
the part of an engine that supplies the fuel/air mixture to the cylinders
Explanation:
There is also an exhaust manifold that collects the exhaust gases from multiple cylinders into a smaller number of pipes
import java.util.Scanner; public class ArraySum { public static void main(String[] args) { Scanner scnr = new Scanner(System.in); final int NUM_ELEMENTS = 8; // Number of elements int[] userVals = new int[NUM_ELEMENTS]; // User numbers int i = 0; // Loop index int sumVal = 0; // For computing sum // Prompt user to populate array System.out.println("Enter " + NUM_ELEMENTS + " integer values..."); for (i = 0; i < NUM_ELEMENTS; ++i) { System.out.print("Value: "); userVals[i] = scnr.nextInt(); } // Determine sum sumVal = 0; for (i = 0; i < NUM_ELEMENTS; ++i) { sumVal = sumVal + userVals[i]; } System.out.println("Sum: " + sumVal); return; } }
Answers
Answer:
There's nothing wrong with the question you posted except that it's not well presented or arranged.
When properly formatted, the program will be error free and it'll run properly.
The programming language used in the question is Java programming lamguage.
in java, the sign ";" signifies the end of each line and lines that begins with // represent comments. Using this understanding of end of lines and comments, the formatted code goes thus
import java.util.Scanner;
public class Arraysum {
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
final int NUM_ELEMENTS = 8;
// Number of elements
int[] userVals = new int[NUM_ELEMENTS];
// User numbers
int i = 0;
// Loop index
int sumVal = 0;
// For computing sum
// Prompt user to populate array
System.out.println("Enter " + NUM_ELEMENTS + " integer values...");
for (i = 0; i < NUM_ELEMENTS; ++i) {
System.out.print("Value: ");
userVals[i] = scnr.nextInt();
}
// Determine sum
sumVal = 0;
for (i = 0; i < NUM_ELEMENTS; ++i)
{
sumVal = sumVal + userVals[i];
}
System.out.println("Sum: " + sumVal); return;
}
}
Also, see attachment for source file
During an investigation of a cybercrime, the law enforcement officers came across a computer that had the hard drive encrypted. Chose the best course of action they should take to access the data on that drive.
a. Use image filtering techniques to see what's behing the encrypted files.
b. Try to convince the owner of the computer to give you to decryption key/password.
c. Identify the encryption algorithm and attempt a brute force attack to get access to the file.
d. Disconnect the hard drive from power so the encryption key can be exposed on the next power up.
e. Try to copy the drive bit by bit so you can see the files in each directory.
Answers
Answer:
b. Try to convince the owner of the computer to give you to decryption key/password.
Explanation:
Encrypted hard drives have maximum security and high data protection. to access them you need to enter a password to unlock them.
The image filtering technique is a method that serves to selectively highlight information contained in an image, for which it does not work.
The encryption algorithm is a component used for the security of electronic data transport, not to access data on an encrypted hard drive.
The encryption key is used in encryption algorithms to transform a message and cannot be exposed by disconnecting the hard drive from its power source.
