on either side, 0 cm Find the size of the net electromagnetic field present at the center of the square using three positive and one negative charges.
The meaning of magnitude?a substantial or significant amount
A man of ordinary means would have been discouraged by the task's size and importance (/maentud/). planetary science. Magnitude also describes how bright a star appears to be from Earth.
What is the physics magnitude?A picture of magnitude
Magnitude is a term used in physics to describe an object's maximal size and direction. Scalar and vector quantities both use magnitude as a common factor.
to know more about electromagnetic visite:
https://brainly.com/question/17057080
#SPJ4
An attack helicopter is equipped with a 20-
mm cannon that fires 197 g shells in the
forward direction with a muzzle speed of
576 m/s. The fully loaded helicopter has a
mass of 3980 kg. A burst of 187 shells is fired
in a 5.01 s interval.
What is the resulting average force on the
helicopter?
Answer in units of N. Answer in units of
N.
The resulting average force on the helicopter is 457,580.8 N.
What is the resulting average force on the helicopter?
The resulting average force on the helicopter is calculated by applying Newton's second law of motion as follows;
Mathematically, the formula for Newton's second law of motion is given as;
F = ma
where;
m is the total mass of the objecta is the acceleration of the objectF = ( mv / t )
where;
m is the total mass of the helicopterv is the muzzle speed of the cannont is the time of interval in which the shell is firedThe resulting average force on the helicopter is calculated as follows;
F = ( 3980 x 576 ) / ( 5.01 )
F = 457,580.8 N
Thus, the resulting average force on the helicopter is a function of the mass of the helicopter, muzzle speed of the cannon and the time interval in which the shell was fired.
Learn more about average force here: https://brainly.com/question/16200276
#SPJ1
Mrs. Young has a mass of 50.5 kg. Her computer has a mass of 2.3 kg. The separation between Mrs. Young and her computer is 0.75 meters.
How much gravitational force does Mrs. Young exert on her computer?
The gravitational force Mrs. Young exerts on her computer is approximately 0.0044 Newtons.
What is computer ?
Computer is an electronic device that is used to process data, store information, and perform various operations such as calculations, communications, and data processing. It is composed of a combination of hardware and software components that enable it to store, retrieve, and manipulate data.
Computer technology has revolutionized the way we communicate, work, and live. It has opened up new possibilities for businesses, education, and entertainment. Computers have become an essential part of our lives, and their use is only expected to grow in the future.
To learn about more computer
https://brainly.com/question/23275071
#SPJ1
the radius of the earth's very nearly circular orbit around the sun is 1.5×1011m.
The earth's orbital radius around the sun is. One revolution takes a certain amount of time. the days into seconds conversion The earth's orbital radius around the sun is given. Velocity is the orbit's circumference measured over time with a single resolution.
What does the elliptical orbit of the Earth entail?The Earth's orbit is not a perfect circle. Its shape is elliptical or marginally oval. This shows that Earth is nearer to the Sun at one point in its orbit than it is at another.
What does a circular orbit look like?Planets orbiting the Sun, moons orbiting big planets, and satellites are examples of situations where there is circular motion with a much bigger core body. They both move at the same speed.
To know more about circular orbit visit:
https://brainly.com/question/29679142
#SPJ4
what are the magnitudes of the angular velocity, the radial acceleration and the tangential acceleration of a spaceship taking a circular turn of raius 3240 km
The angular velocity of a spaceship taking a circular turn of radius 3240 km is equal to the circumference of the circle divided by the time it takes to complete the turn, or 2πr/t.
What is circumference ?
Circumference is the distance around the outside of a circle or other curved shape. It is calculated by taking the diameter of the circle and multiplying it by pi (approximately 3.14).
It is also sometimes referred to as the perimeter of a circle. Circumference is an important measurement in geometry, allowing us to calculate the area of a circle, or the distance between two points on a circle. It can also be used in practical applications such as determining the size of a wheel or the capacity of a container.
To learn about more circumference
https://brainly.com/question/27447563
#SPJ4
if the spring stretches 0.300 m while supporting an 8.2 kg child, what is its spring constant (in n/m)?
The spring constant is 27.333 N/m
The spring constant (k) can be found using Hooke's Law, which states that the force needed to stretch or compress a spring is directly proportional to the distance the spring is stretched or compressed. The proportionality constant is called the spring constant.
The equation for Hooke's Law is:
F = kx
Where F is the force applied to the spring, x is the distance the spring is stretched or compressed, and k is the spring constant.
In this case, the force applied to the spring is the weight of the child (8.2 kg) multiplied by the acceleration due to gravity (9.8 m/s^2)
F=8.2 kg * 9.8 m/s^2
and the distance the spring is stretched is given as 0.3m
Therefore, we can find the spring constant by rearranging the equation:
k = F/x
k = (8.2 kg * 9.8 m/s^2) / 0.3 m
k = 27.333 N/m (Newton per meter)
Therefore the spring constant is 27.333 N/m
Learn more about spring constant here: https://brainly.com/question/23885190
#SPJ4
What is significant about the temperature -40%
It's the temperature at which Fahrenheit and Celsius thermometers read the same exists significant about the temperature -40
What is the significance of temperature?
One of the most pervasive and significant physical elements in an organism's environment is temperature. It is a gauge for the typical speed of atoms and molecules moving at random; the higher the temperature, the faster the motion.
Because temperature affects the physical state of water, it has the greatest impact on how organisms are distributed. Most organisms cannot survive in environments where the temperature is consistently below 0°C or above 45°C.
Since there are 100 units between the freezing (0°C) and boiling (100°C) points of water, the Celsius scale is a centigrade scale. The majority of the world uses this temperature scale, which is also the recognized unit of measurement in science.
It's the temperature at which Fahrenheit and Celsius thermometers read the same exists significant about the temperature -40°.
Learn more about temperature here: brainly.com/question/24746268
#SPJ1
a car drives straight down toward the bottom of a valley and up the other side on a road whose bottom has a radius of curvature of 115 m. at the very bottom, the normal force on the driver is twice his weight. at what speed was the car traveling, in m/s?
On a road whose bottom has a radius of curvature of 115 m an automobile travels straight down toward The speed of the car is 33.588 m/s at the very bottom.
What minimum static friction coefficient is required?The coefficient of static friction between the tires and the road needs to be 0.8 for a car to go at 95 km/h around a curve with a radius of 125 m.
What is an automobile carrying 1200 kg's top speed?As a result the acceleration due to gravity or g is approximately 9.81 m/s2 9.81 m/s 2 The equivalent of the frictional speed force is equivalent to the relating to the centripetal force The values in the equation above can be changed so the maximum speed of the vehicle is 22.2 m/s 22.2 m/s.
To know more about friction speed visit:
https://brainly.com/question/30079946
#SPJ4
Even though one layer exerts a force on another, it is the NET force (from the layers above and below) that determine the acceleration of a given layer. That in turn determines how the velocity of the layer changes. Re call that if the velocity of an object is in same direction as Net force and acc., then the object speeds up, and if opposite direction, then the object slows down.
The net force acting on a given layer is the sum of the forces exerted by the layers above and below it.
The acceleration of the given layer is then determined by this net force, as well as the mass of the layer.
The acceleration of the layer will be in the same direction as the net force, and the magnitude of the acceleration will be proportional to the magnitude of the net force divided by the mass.
what is net force?
Net force is the vector sum of all forces acting on an object. It is the total amount of force being applied to an object and is calculated by adding all the individual forces together.
Therefore, The net force acting on a given layer is the sum of the forces exerted by the layers above and below it.
To learn more about net force
Here: https://brainly.com/question/12970081
#SPJ4
Scenario A dump truck is making a very fast left turn as shown. In the back are two blocks of ice, one mass M and one mass m (M > m). The truck does not roll over.
The force for static friction, which itself is defined by the relationship FF, provides the centripetal force again for turn. Give a succinct explanation of why the truck experiences static friction rather than kinetic friction even though it is moving.
What exactly is centripetal force?Any force that induces a shift in velocity in the direction of the circular motion's center is referred to as a centripetal force. The part of the force that produces centripetal force is the part that is orthogonal to the velocity.
What kind of force is centrifugal?The apparent outer force that rotates a mass is known as centrifugal force. Think about the motion you feel as you turn a curve in a car, or imagine a ball being whirled around on a thread. Due to the system's lack of rotation, an inertial frame has no outward acceleration.
To know more about centripetal force visit:
https://brainly.com/question/11324711
#SPJ4
find vf , the final speed of the particle after it has traveled a distance d . express the final speed in terms of vi , m , f , and d .
Due to the absence of a directional component, the particle's final speed, vf, is calculated as (vi2+2*(F/m)*D) after it has travelled d metres and has been moving at a velocity dictated by terms of vi, m, f, and d.
The equation (vi2+2*(F/m)*D) can be used to find the vf. Vi is the initial velocity, m is the mass, D is the distance, and F is the force. Velocity, measured in metres per second, is the rate at which an object's location shifts. Physics defines a force as an influence that has the power to change how an object moves. An object with mass can experience a force that alters its acceleration or velocity (for example, moving from a condition of rest).
Learn more about velocity here
https://brainly.com/question/18084516
#SPJ4
move the slider on the electromagnetic spectrum to several higher frequencies, towards the uv region. what changes, if any, occur?
Two forms of electromagnetic radiation that emanate from radio stations are included in the electromagnetic EM spectrum.
What transpires to an em phenomena at higher frequencies?Frequency is the number of full wavelengths in a certain amount of time. A wavelength's frequency and energy drop as it gets bigger. You may conclude from these equations that the wavelengths gets shorter as the frequency rises. The wavelength lengthens as the frequency drops.
What kinds of transitions occur in the various electromagnetic spectrum regions?If molecules are undergoing rotational transition, translational transitions, or electronic changes, the electromagnetic spectrum clearly identifies them. The ability to read a molecule or collection of molecules
To know more about electromagnetic visit :
https://brainly.com/question/17057080
#SPJ4
the condition ∑ fi = 0 is sufficient to assure that a rigid body is in equilibrium. T/F
The statement "The condition ∑ fi = 0 is sufficient to assure that a rigid body is in equilibrium." is False.
What is the condition of translational equilibrium?The condition that the vector sum of all forces acting on a rigid body is zero (∑ fi = 0) is necessary but not sufficient to assure that a rigid body is in equilibrium. This condition is known as the condition of translational equilibrium. A rigid body can be in a state of translational equilibrium, but still be rotating or accelerating.
To assure that a rigid body is in equilibrium, we need to satisfy both the condition of translational equilibrium and the condition of rotational equilibrium which means that the net torque acting on the body is zero.
To know more about rigid body, visit:
https://brainly.com/question/12903545
#SPJ4
a block has an acceleration a when pulled by a string. if two blocks are glued together and pulled with twice the original force ,their acceleration will be
two blocks are glued together and pulled with twice the original force ,their acceleration will be
When a block is being dragged by a string the acceleration won't change.
When a block is being dragged by a string, it accelerates. Two identical blocks will accelerate if they are cemented together and dragged with two times the initial amount of force. As a result, even if the mass and force are both doubled, the acceleration won't change. According to the Second Law of Newton, if a force F is applied to a mass m object, the acceleration will be given by the formula a = F/m. Two identical blocks will have a mass of 2m if they are cemented together. The acceleration will be 2F/2m = F/m = a with a force of F.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
correct answer iss a ??
Answer:
a
Explanation:
your right maybe
Cosmic Connection Definition
Cosmic connections are those individuals who come into our lives to assist us develop and grow. Everything is united, so there is nothing of the sort as a possible gathering. The characters in our world are not thereby some coincidence, but the reason is the vital cosmic connection.
Cosmic connections are people who come into our lives to help us grow and develop spiritually.
What is Cosmic connections?Cosmic Connections is a philosophy exploring the interconnectedness of all living things and the universe. It encourages us to see ourselves as part of a larger cosmic family, recognizing our relationships with the Earth, the stars, and the galaxies.
This interconnection is based on the concept that everything in the universe is connected and can affect each other, and that our lives are not just the result of random chance. These special people help us to develop spiritually and can be seen as guides on our journey. They may come in the form of friends, mentors, teachers, or even strangers. Ultimately, these cosmic connections are here to help us to become the best versions of ourselves.
To learn more about Cosmic connections
https://brainly.com/question/12798045
#SPJ4
What does the standard deviation of a set of data tell you?
A.The number of experiments that were performed
B.How many data points there are in the set
C.The largest and smallest data values of the set
D.How much each data point differs, on average, from the mean value of the set
Answer:
D. How much each data point differs, on average, from the mean value of the set
Explanation:
A standard deviation (or σ) is a measure of how dispersed the data is in relation to the mean. Low standard deviation means data are clustered around the mean, and high standard deviation indicates data are more spread out.
since the moon's orbit is not a perfect circle, the earth-moon distance varies slightly. when it is closest to earth, the moon is 363,104 km away. its farthest distance from earth is 405,696 km. this variation in distance is responsible for annular eclipses. how many times larger does the moon appear in our sky when it is closest to earth as compared to when it is farthest?
subtract the two When the moon is closest to earth, it appears in our sky 1.12 times larger than when it is farther away. Because the moon's orbit is not a perfect circle, the earth-moon distance changes slightly.
What does the name Earth actually mean?Contrary to popular assumption, Earth does not have a recognized name in other countries. Simply put, the term "Terra" refers to a typical misunderstanding of the planet's scientific name.
What is Earth a planet?Our home planet, Earth, is a unique place. The only site in the cosmos where life has been proved to exist is on Earth, which is the third planet from the sun. Earth is our solar system's fifth-largest planet with a radius of 3,959 miles.
To know more about earth visit:
https://brainly.com/question/12041467
#SPJ4
two objects are moving in the same line as shown: they collide and stick together. what fraction of the initial kinetic energy is lost in the collision?
The fraction part of the total initial kinetic energy lost during the collision is 0.96.
What transpires to kinetic energy during impact?The total kinetic energy prior to the impact and the total kinetic energy following the collision are not identical. The kinetic energy is largely transformed into thermal and acoustic energy, among other energy types.
m1 = 300 g => 0.3Kg
m2 = 600 g => 0.6Kg
v1 = 1 m/s.
v2 = 0.75 m/s.
conservation of momentum : m1v1 + m2v2 = (m1+m2)v
=> 0.3x1 - 0.6x0.75 = (0.3+0.6) v
v => - 0.167m/s
KEi => 0.5 m1v1^2 + 0.5 m2 v2^2
=> 0.318J
KEf => 0.5 (m1+m2) v^2
=> 0.0125J
Fraction of initial kinetic energy = KEi - KEf / KEi
=> 0.318-0.0125/ 0.318
=> 0.96
After a collision, does kinetic energy remain constant?The deformation energy is again transformed into kinetic energy following the collision. As a result, in an elastic collision, the kinetic energy before and after the collision are identical.
Learn more about kinetic energy here:
brainly.com/question/20712363
#SPJ4
Two pieces of clay are moving directly toward each other. When they collide, they stick together and move as one piece. One piece has a mass of 300 grams and is moving to the right at a speed of 1 m/s. The other piece has mass 600 grams and is moving to the left at a speed of 0.75 m/s. What fraction of the total initial kinetic energy is lost during the collision?
convergent or divergent depending on how they refract light. what is the difference between these two types of lenses
Light flowing through a converging lens is brought to either a point or focus. The light disperses when seen via a divergent lens. Because they both focus light on your retina, they are converging.
What causes light refract?Since light moves through different material at varying rates, refraction—or a shift in the direction that the flow of light—occurs. Except for when i=00, a light ray's orientation changes when it travels from one substance to another due to a change in speed.
How does light refract?When light enters a material with a differing refractive index at an angle, it refracts (optical density). A shift in speed is what led to this direction change. For instance, light slows down when it passes through water from air and continues to move at a new angle or direction.
To know more about Refract light visit:
https://brainly.com/question/12844178
#SPJ4
The complete question is -
Lenses are described as convergent or divergent depending on how they refract light. What is the difference between these two types of lenses? Based on what you have learned, do you think the cornea and the eye lens act together as a convergent or divergent lens? Explain.
what is the energy of a 679 nm photon emitted from a light source? answer in units of j. answer in units of j.
The energy of a 679 nm photon emitted from a light source is 1.76*10^5 J.
What does "photon energy" mean?A photon is a tiny energy packet of electromagnetic radiation, also referred to as a light quantum. Albert Einstein's account of the photoelectric effect, in which he proposed the existence of discrete energy packets during the transmission of light, gave rise to the concept of the photon in 1905.
What does photon energy mean?The electron-volt (eV), rather than the joule, is a commonly used unit of energy when discussing "particles" like photons or electrons (J). A photon with an energy of 1 eV = 1.602* 10^-19 J is the energy needed to elevate an electron through 1 volt.
E =hν
E = h*c/λ
h = 6.626*10^-34 J.s
c = 3*10^8 m/s
λ = 679*10^-9 m
1 mol photons = 6.023 x 10^23 photon
Energy of one photon [tex]E=\frac{6.626*10^-34*3*10^8}{679*10^-9}[/tex]
[tex]E=\frac{6.023*10^23*6.626*10^-34*3*10^8}{679*10^-9}[/tex]
[tex]E=1.76*10^5J[/tex]
To know more about photon energy visit:
https://brainly.com/question/28463226
#SPJ4
a 2 kg block held 3 meters above the equilibrium position of a spring. if the block is released and falls such that it compresses the spring a maximum distance of 0.25 m below the equilibrium position, what is the spring constant of the spring?
Spring constant = (2 kg)(9.81 m/s²) / 0.25 m = 785.2 N/m.the equilibrium position, what is the spring constant of the spring.
what is equilibrium ?
Equilibrium is an important concept in economic theory and refers to a state in which economic forces such as supply and demand are balanced and in the absence of external influences the values of economic variables will not change. In economic terms, equilibrium occurs when the amount of goods and services supplied by firms equals the amount of goods and services that households are willing and able to buy.
This is also known as market equilibrium. In this situation, the price of goods and services will remain stable and market participants will not have a strong incentive to change their behavior. Equilibrium is also important in other fields such as physics and chemistry.
To learn about more equilibrium.
https://brainly.com/question/517289
#SPJ4
a wave wirh a period of 50 seconds is generated and the wave length is 2m calculate the speed
Answer:
0.04 m / s
Explanation:
distance over time will get you your speed
A transverse wave on a rope is given by y(x,t)= (0.750cm)cos(π[(0.400cm−1)x+(250s−1)t]).Find- A) Amplitude- B) Period- C) Frequency- D) Wavelength- E) Speed of propagation- F) Is the wave traveling in the +x- or − x-direction?- G) The mass per unit length of the rope is 0.0500 kg/m. Find the tension?- H) Find the average power of the wave (Watts)?
A transverse wave n a rope is given by y(x,t)=(0.750cm)cos(π[(0.400cm−1)x+(250s−1)t]), the amplitude is 0.750cm, the time period of wave is 8m/s, Frequency is 0.125 Hz, average power of the wave is Watts.
The amplitude of a wave corresponds to its maximum oscillation of the wave itself.
In our problem, the equation of the wave is
y(x,t)=(0.750cm)cos(π[(0.400cm−1)x+(250s−1)t])
We can see that the maximum value of y(x,t) is reached when the cosine is equal to 1. When this condition occurs,
y(x,t)=(0.750cm) which is the amplitude of the wave.
A transverse wave is a wave in which the disturbance in the medium is perpendicular to the propagation of the wave. The time period of the wave is the time taken in completing one oscillation about the mean position.
The standard wave is given as,
y(x,t) = Acos(kx+t)
Comparing the standard wave to the wave given in question.
We find out the time period is 0.025 s.
Frequency = 1/T= 40
Learn more about frequency:
brainly.com/question/29739263
#SPJ4
we have identified the general type of tire and car. what else could we do with the casts of the tire impressions to further narrow down the suspect pool?
Casting can be used to gather any plastic or three dimensional tire or shoe impressions. Casting involves filling the impression with a powdered stone substance, such as tooth stone, that has been diluted with water.
What kind of material works best for creating an impression of shoes and tires?Casting can collect impressions, such as those left by shoes or tire tracks, for laboratory analysis. These kind of casts are often made of dental stone casting material.
What information is contained in tire impressions?Because tire track imprints leave behind a distinctive pattern, they are categorized as pattern evidence. Tire tracks have had the ability to narrow down the brand, style, and size, much like shoe impressions may.
To know more about impression visit:
https://brainly.com/question/29998394
#SPJ4
an object is placed 40cm from a converging lens of focal length of 10cm. if a real image of 5cm height is formed, calculate the height of the object
Answer:
15 cm
Explanation:
[tex]m = \frac{f}{s - f} = \frac{i}{o} \\ \frac{10}{40 - 10} = \frac{5}{o} \\ \frac{1}{3} = \frac{5}{o} \\ o = 15 \: cm[/tex]
a 0.25 kg object on the end of a spring moves simple harmonic motion. the spring constant is 200 n/m. the total energy of the system is 6.0 j. determine the amplitude.
A 0.25 kilogram object just on end of the a spring moves in simple harmonic motion with an amplitude of 18.75 cm. 200 n/m is the spring constant.
Why do we use amplitude?Amplitude modulation, or AM, is now utilized for two-way radio communication for aircraft at VHF frequencies and for audio transmission on the long, medium, and short wave bands. Due to the use of superior modulation techniques, it is only used in a very small number of other applications.
Angular velocity ω = 2π / T where T is time period of rotation .
= 2 x 3.14 / .34
= 18.47 rad /s
energy = 1/2 m ω²Α²
6 = .5 x 18.47² x A²
A² = 0.035176
A = .18753
= 18.75cm
To know more about amplitude visit:
https://brainly.com/question/9525052
#SPJ4
a 10 kg bomb is sliding across an ice rink southward at 6 m/s. it explodes. piece 1 with a mass of 2 kg moves southward at 12 m/s. find the direction and magnitude of the velocity of mass 2.
The direction and magnitude of the velocity of mass 2 is 5.6 m/s southward.
What is velocity?Velocity is a vector quantity that measures the rate of change of an object's position in a particular direction.
The direction and magnitude of the velocity of mass 2 can be determined by using the law of conservation of momentum. According to this law, when a system experiences no external force, the total momentum of the system before the explosion must equal the total momentum of the system after the explosion.
Before the explosion, the total momentum of the system is 10 kg * 6 m/s = 60 kg m/s.
After the explosion, the total momentum of the system is 2 kg * 12 m/s + (10 kg - 2 kg) * V2, where V2 is the velocity of mass 2.
Therefore, the equation for conservation of momentum can be written as:
60 kg m/s = 2 kg * 12 m/s + (10 kg - 2 kg) * V2
Solving for V2, we get V2 = 5.6 m/s.
Therefore, the direction and magnitude of the velocity of mass 2 is 5.6 m/s southward.
To learn more about velocity
https://brainly.com/question/80295
#SPJ4
NASA launches a satellite into orbit at a height above the surface of the Earth equal to the Earth's mean radius. The mass of the satellite is 480 kg. (Assume the Earth's mass is 5.97 1024 kg and its radius is 6.38 106 m.)
3 hours 59', 5,590 m/s, 1,910 N, The only force operating on the satellite is merely the attracting force from Earth, which is provided by the Universal Law of Gravitation, which disregards the influence of any other entity.
Which three laws of gravitation are there?The force of gravity between two things is proportional to the square of the mass of one of the items. The force of gravity between two objects triples if one of their masses triples.
What is the law of gravity?Any particle of matter will gravitate toward any other particle in the universe, according to Newton's law of gravitation, with a force that varies directly with the product of the masses and inversely with the square of the distance between them.
Fg = G* ms*me / (res² (1)
where: G = 6.67* 10⁻¹¹ N.m² / kg² ms = 780 kg, me= 5.97* 10²⁴ kg, and
res = 2* 6.38* 10⁶ m
Fg = 1,910 N (answer c)
G* ms*me / (res)²= ms * v² / res
v = √(G*me/r) = 5,590 m/s (answer b)
T = 2* π*res / v = 3 h 59 min (answer a)
To know more about universal law of gravitation visit:
https://brainly.com/question/13474110
#SPJ4
A teacher had her students write down hypotheses about an experiment. Which is a valid hypothesis?
The valid hypothesis is If Earthquakes occur, then tornados could occur at the same time.
What is a hypothesis?
A hypothesis is an explanation proposed for a phenomenon. The scientific method needed a hypothesis to be testable in order to be considered a scientific hypothesis.Scientists usually base scientific hypotheses on previous observations that cannot be adequately explained by existing scientific theories.In an experiment, a hypothesis is used to illustrate the relationship between two variables.The goal of a hypothesis is to find an answer to a question. A formalized hypothesis forces us to consider what results we should expect from the experiment. The independent variable is the first variable.A valid hypothesis is that if an earthquake occurs, tornadoes may follow.To know more about hypothesis, click the link given below:
https://brainly.com/question/26393854
#SPJ4
the relative enrichment in what isotope in venus' atmosphere is evidence of a significant loss of water over time?
The isotope that is relatively enriched in Venus' atmosphere is deuterium, or hydrogen-2.
This is evidence of a significant loss of water over time, as deuterium is heavier than regular hydrogen, and therefore it would be more likely to be lost to space than lighter hydrogen atoms.
What is deuterium?
Deuterium is an isotope of hydrogen with a nucleus that contains one proton and one neutron.
It is also known as heavy hydrogen or hydrogen-2, and is twice as heavy as the more common protium isotope of hydrogen.
Deuterium is used in nuclear reactors and is also a key component in heavy water, which is used in some types of nuclear reactors.
To learn more about deuterium
Here: https://brainly.com/question/29103394
#SPJ4
