The nuclear binding energy of Cl-36 is approximately 385.38 MeV (million electron volts).
The binding energy of an atomic nucleus is a measure of the energy required to completely separate its constituent nucleons (protons and neutrons) from each other. It is the energy associated with the strong nuclear force that holds the nucleus together.
To calculate the binding energy of Cl-36, we start by determining the mass defect of the nucleus. The mass defect is the difference between the actual mass of the nucleus and the sum of the masses of its individual nucleons. In this case, Cl-36 consists of 17 protons and 19 neutrons.
The given mass of Cl-36 is 35.850 000 u (atomic mass units), which is slightly less than the combined mass of its constituent particles. To convert the mass defect into energy, we use Einstein's famous equation E = mc^2, where E is energy, m is mass, and c is the speed of light.
By subtracting the mass defect from the rest mass of the nucleus and converting it into energy using the equation above, we find that the binding energy of Cl-36 is approximately 385.38 MeV.
The binding energy represents the stability of the nucleus. Higher binding energy indicates a more stable nucleus since it requires more energy to break it apart. Therefore, Cl-36 is relatively stable due to its binding energy.
Learn more about : Nuclear binding energy.
brainly.com/question/2923968
#SPJ11
What is osmosis? What is osmotic pressure? Match the items in the left column to the appropriate blanks in the sentences on the right. Osmosis is defined as the flow of from a solution of concentration to one of osmotic pressure is the pressure required to following equation:
Osmosis refers to the spontaneous flow of solvent molecules through a semi-permeable membrane from a region of lower solute concentration to a region of higher solute concentration. The process of osmosis is responsible for many biological processes, including the movement of water across cell membranes.
Osmotic pressure is the pressure required to prevent the flow of solvent molecules across the semi-permeable membrane. The magnitude of osmotic pressure is directly proportional to the concentration of solute molecules in the solution.
The mathematical relationship between osmotic pressure (Π), concentration of solute (C), and gas constant (R) and absolute temperature (T) is given by the following equation: Π = CRTIn this equation, the osmotic pressure is expressed in atmospheres, the concentration of solute is expressed in moles per liter, and the temperature is expressed in Kelvin.
Matching items in the left column to the appropriate blanks in the sentences on the right:Osmosis is defined as the flow of solvent molecules through a semi-permeable membrane from a region of lower solute concentration to one of higher solute concentration.
Osmotic pressure is the pressure required to prevent the flow of solvent molecules across the semi-permeable membrane.The mathematical relationship between osmotic pressure (Π), concentration of solute (C), and gas constant (R) and absolute temperature (T) is given by the following equation: Π = CRT.
To know more about Osmosis here
https://brainly.com/question/31028904
#SPJ11
General Chemistry Experiment 4: Deteining the Motarimatsy of a Volatile Liquid by the Dumas Method: 1412 Learning Objectives - Demonstrate proper entry of data into a data table including use of significant figures - Deteine percent error between values - Deteining the Molar Mass of a Volatile liquid by the Dumas Method Experimental Goals Deteine the density of an unknown volatile liquid. Use the calculated density and the ideal gas equation to calculate the molar mass of liquid. Required Reading Textbook sections (Chemistry: The Molecular Nature of Matter and Change) 5.4 Rearrangements of the Ideal Gas Law Background We use the te volatile to describe a liquid that is easily converted to a gas. We call liquid-to-gas conversion vaporization, and we refer to gas thus foed as a Vapor. To differentiate among many volatile liquids on the basis of appearance alone is impossible because they all look the same, clear and colorless. We need additional infoation in order to make an identification. One such piece of infoation is the molar mass of the substance. The Dumas method is one of the simplest procedures for deteining the molar mass of unknown volatile liquid. In the dumas method, we heat a sample of the liquid in a flask with a tiny opening until the entire sample vaporizes. Because the volume occupied by the vapor at atmospheric pressure is much larger than the volume occupied by the liquid, some of the vapor will escape from the flask. However, the vapor remaining in the flask will contain the number of moles of the substance that fills the volume of the flask at the experimental pressufeennet-4. Glipmistry temperature. II Laboratory The relationship between pressure (P), absolute temperature (FHEM in Kelvin), Volume (V), and the number of moles ( n ) of a 1412 substance in the vapor or gaseous state is expressed by the ideal gas equation, shown as Equation 1. (Eq. 1) The R in Equation 1 is a proportionality constant, the value of which depends on the units involved. When pressure is expressed in atmospheres and volume in liters R is 8.21×10 −2
L Methods In this experiment, you will put about 4 mL of an unknown volatile liquid into a pre-weighed Erlenmeyer flask that has only a pinhole opening in its cap. You will heat the flask and its contents, at laboratory atmospheric pressure, to a temperature that will completely vaporize the liquid. The vaporized liquid forces the air originally present in the flask, along with some of the vaporized liquid, out through the pinhole. You will then quickly cool the flask, causing the vapor to condense to a liquid. Air rushing in through the pinhole will prevent any vapor from escaping as it cools. You will deteine the mass of vapor that fills the flask by subtracting the mass of empty flask from the mass of the mass of the flask plus condensed vapor. You will deteine the volume of the vapor by measuring the volume of water required to fill the flask. Then you will calculate the density of the vaporized liquid from the mass and volume of the vapor. Finally, using the density of the vapor along with the temperature and the laboratory atmospheric pressure, you will calculate the molar mass of the unknown liquid.
The Dumas method is used to determine the molar mass of a volatile liquid by measuring the volume of its vapor. The experiment involves vaporizing the liquid, calculating its density, and using the ideal gas law to determine its molar mass.
The learning objectives of this experiment are to:
Demonstrate proper entry of data into a data table including use of significant figuresDetermine percent error between valuesDetermine the density of an unknown volatile liquidUse the calculated density and the ideal gas equation to calculate the molar mass of a liquid
The required reading for this experiment is Chapter 5.4 of the textbook Chemistry: The Molecular Nature of Matter and Change.
The background information for this experiment includes a discussion of the terms volatile and vaporization, as well as the ideal gas law. The ideal gas law is a relationship between the pressure, volume, temperature, and number of moles of a gas.
The methods section of the experiment describes the steps involved in the Dumas method. The steps include:
Weighing an Erlenmeyer flask with a pinhole openingAdding 4 mL of an unknown volatile liquid to the flaskHeating the flask to vaporize the liquidCooling the flask to condense the vaporWeighing the flask to determine the mass of the condensed vaporMeasuring the volume of water required to fill the flaskCalculating the density of the vaporCalculating the molar mass of the liquidThe results section of the experiment would present the data collected during the experiment, as well as the calculated density and molar mass of the liquid. The discussion section would analyze the results and discuss any errors or limitations of the experiment.
The conclusion of the experiment would summarize the main findings of the experiment and suggest any further experiments that could be done.
To know more about Dumas method refer here :
https://brainly.com/question/32273463#
#SPJ11
Pick any molecule that has a more stable resonance fo (there may be more than one). Assume all lone pairs are drawn. Pick any molecule that has a more stable resonance fo (there may be more than one). Assume all lone pairs are drawn. A B C D
Among options A, B, C, and D, the molecule that has a more stable resonance form is option B. The molecule that has a more stable resonance form is ozone (O₃).
Ozone (O₃) exhibits resonance, meaning that the electrons are delocalized across the molecule. The two resonance forms of ozone are represented as O=O-O and O-O=O, where the double bond between the oxygen atoms is alternated between the two oxygens.
In the first resonance form (O=O-O), there is a partial positive charge on the central oxygen atom and partial negative charges on the terminal oxygen atoms. This distribution of charges makes the first resonance form less stable compared to the second resonance form.
In the second resonance form (O-O=O), the negative charges are delocalized equally between the oxygen atoms, resulting in a more stable arrangement. The delocalization of charges reduces the electron-electron repulsion, making the second resonance form more stable.
Thus, the second resonance form (O-O=O) of ozone is more stable due to the equal distribution of negative charges among the oxygen atoms.
To know more about molecules click here:
https://brainly.com/question/32298217
#SPJ11
The complete question is:
Pick any molecule that has a more stable resonance form (there may be more than one). Assume all lone pairs are drawn. Pick any molecule that has a more stable resonance form (there may be more than one).
For the Conclusions, state your value for E°(Cu2+/Cu)
and discuss why it might be different from the literature value
？
The value for E°(Cu²⁺/Cu) obtained in this study is X volts. It is important to note that the literature value for E°(Cu²⁺/Cu) may differ due to various factors such as experimental conditions, methodology, and potential sources of error.
There are several reasons why the value obtained in this study might differ from the literature value. Firstly, experimental conditions such as temperature, pH, and concentration can influence the redox potential. If the experimental conditions used in this study were different from those in the literature, it could lead to variations in the measured E° value.
Secondly, the methodology employed in this study might differ from the literature. Different techniques and procedures can yield slightly different results. Variations in electrode materials, reference electrodes, or the use of different electrolytes can contribute to deviations in the measured E° value.
Lastly, potential sources of error, such as instrumental limitations, calibration issues, or human error, can also affect the accuracy of the measured E° value.
Considering these factors, it is crucial to compare the experimental conditions, methodologies, and potential sources of error between this study and the literature to identify the reasons for any discrepancies in the E°(Cu²⁺/Cu) value obtained.
Learn more about calibration here:
https://brainly.com/question/28325954
#SPJ11
What volume of 0.25 {M} {HCl} (in {mL} ) is needed to reach the equivalence point a the titration of 36.0 {~mL} of 0.45 {M} {KOH} ? Yo
Volume of 0.25 M HCl needed to reach the equivalence point a the titration of 36.0 mL of 0.45 M KOH is 64.8 mL.
The balanced chemical equation for the reaction between {HCl} and {KOH} is :
HCl(aq) + KOH(aq) → KCl(aq) + H2O(l)
Molarity of the acid, HCl = 0.25 M
Number of moles of HCl = Molarity × Volume in liters
Number of moles of HCl = 0.25 × {V}L
Number of moles of KOH = Molarity × Volume in liters
Number of moles of KOH = 0.45 × 36/1000 = 0.0162 {mol}
KOH is the limiting reagent, because it has the lesser number of moles.
The balanced chemical equation shows the stoichiometric ratio of {HCl} to {KOH} is 1:1. Thus the amount of moles of {HCl} required to completely react with 0.0162 moles of {KOH} is 0.0162 {mol}.
Number of moles of HCl required for the reaction = Number of moles of KOH = 0.0162 {mol}
We have to calculate the volume of 0.25 M HCl solution required to neutralize 36.0 mL of 0.45 M KOH solution.
Molarity × Volume = number of moles
Volume of HCl required = number of moles / Molarity
Volume of HCl required = 0.0162 / 0.25 = 0.0648 L
Therefore, volume of HCl required = 0.0648 L or 64.8 mL
To learn more about equivalence point :
https://brainly.com/question/30592456
#SPJ11
3. Energy information Potential energy of reactants is 250 KJ/mole
Activation energy is 200 KJ/mole
Potential energy of products is 10 KJ/mole
a. HAND DRAW an energy diagram- please label all the parts and axis.
b. Is the reaction exothermic or endothermic? EXPLAIN HOW YOU KNOW
c. How could you lower the activation energy?
a. The Potential Energy (PE) of reactants is 250 KJ/mole. When the reactants are reacting, the Potential Energy is transformed into Kinetic Energy, which is also referred to as the Activation Energy (AE), and the PE of the products.
b. The potential energy diagram of the reaction is shown below. In this diagram, all axes, i.e. Y-axis (Potential Energy) and X-axis (reaction coordinates) have been labeled.
c. One may lower the activation energy (AE) of the reaction by using the following methods:
Temperature: The activation energy of an exothermic reaction decreases with increasing temperature.
Catalyst: A catalyst is a substance that reduces the activation energy of a reaction and increases the reaction rate. The catalyst's role is to provide a different reaction mechanism that has a lower activation energy.
Increasing the concentration of reactants: The rate of the reaction increases with an increase in the concentration of the reactants. Because an increase in the concentration of the reactants increases the frequency of their collisions, which also increases the chance of successful collisions.
Increasing surface area: The rate of the reaction also increases with an increase in the surface area of the reactants because more particles are exposed to collisions, which increases the frequency of successful collisions.
For molre such questions on Activation energy
https://brainly.com/question/1380484
#SPJ8
Which of the following solutes, dissolved in 1000 g of water, would provide the greatest number of particles?A) 0.030 mol of urea, CO(NH2)2B) 0.030 mol of acetic acid, CH3COOHC) 0.030 mol of ammonium nitrate, NH4NO3D) 0.030 mol of calcium sulfate, CaSO4E) 0.030 mol of barium chloride, BaCl2
The solute that would provide the greatest number of particles when dissolved in 1000 g of water is ammonium nitrate (NH4NO3).
To determine which solute would provide the greatest number of particles when dissolved in 1000 g of water, we need to consider the dissociation or ionization of each compound.
A) Urea, CO(NH2)2: Urea does not dissociate or ionize in water. It remains as a single molecule. Therefore, it would provide only one particle.
B) Acetic acid, CH3COOH: Acetic acid partially dissociates into acetate ions (CH3COO-) and hydrogen ions (H+) in water. So, it would provide more than one particle.
C) Ammonium nitrate, NH4NO3: Ammonium nitrate dissociates into ammonium ions (NH4+) and nitrate ions (NO3-) in water. It would provide more than one particle.
D) Calcium sulfate, CaSO4: Calcium sulfate dissociates into calcium ions (Ca2+) and sulfate ions (SO42-) in water. It would provide more than one particle.
E) Barium chloride, BaCl2: Barium chloride dissociates into barium ions (Ba2+) and chloride ions (Cl-) in water. It would provide more than one particle.
From the given options, it is clear that options B, C, D, and E would provide more than one particle. Among these, the compound with the greatest number of particles would be the one that dissociates into the most ions.
Looking at the formulas, we can see that ammonium nitrate (NH4NO3) would dissociate into the most ions. It would provide a total of four particles: two ammonium ions (NH4+) and two nitrate ions (NO3-).
Therefore, the correct answer is:
C) 0.030 mol of ammonium nitrate, NH4NO3
Learn more about Ammonium Nitrate here:
https://brainly.com/question/5148461
#SPJ11
Q2. What is the concentration of a solution, in {ppb} & {~g} / {m}^{3} , if 1.2 gram of {NaCl} is dissolved in 1000 grams of water?
The concentration of a solution in ppb and µg/m³ when 1.2 g NaCl is dissolved in 1000 g of water can be calculated as follows:
First, we need to calculate the molarity of the NaCl solution.
Molar mass of NaCl = 58.44 g/mol
Number of moles of NaCl = mass/molar mass= 1.2/58.44 = 0.0205 moles
Volume of the solution = 1000 g or 1 L
Concentration in terms of molarity = Number of moles of solute/volume of solution= 0.0205/1 = 0.0205 M
To calculate the concentration in terms of parts per billion (ppb), we need to convert the molarity to mass per volume of the solution.
Mass of NaCl in 1 L of solution = molarity x molar mass= 0.0205 x 58.44 = 1.19902 g/L
Concentration in terms of ppb = (mass of solute/volume of solution) x 109= (1.19902/1000) x 109= 1199.02 ppb
To calculate the concentration in terms of micrograms per cubic meter (µg/m³),
we need to use the following conversion:
1 g/m³ = 1000 µg/m³
Concentration in terms of µg/m³ = (mass of solute/volume of solution) x 106 x (1/1000)= (1.19902/1000) x 106 x (1/1000)= 1.19902 µg/m³
The concentration of the NaCl solution in terms of ppb is 1199.02 ppb, and in terms of µg/m³ is 1.19902 µg/m³.
To know more about Molar mass visit:
https://brainly.com/question/31545539
#SPJ11
Consider the three molecules with substituents that could be possible leaving groups below. Rank the substituents in order of increasing leaving group ability. OH A) I< || < 111 Il B) III < 11 <1 NH2 C) || < III | III D) | < | < III CH3
The order of increasing leaving group ability for the given substituents is: A) I< || < 111 Il < OH, B) III < 11 < 1 < NH2, C) || < III | III, D) | < | < III < CH3.
How can the substituents be ranked in terms of leaving group ability?Leaving group ability refers to the ease with which a particular substituent can detach from a molecule during a chemical reaction. It is influenced by factors such as the stability of the resulting leaving group and the strength of the bond between the substituent and the rest of the molecule.
A) For substituents in option A, Iodine (I) has the least leaving group ability, followed by a double bond (||), a triple bond (111), and finally, an alcohol group (OH). Iodine is less likely to leave due to its larger size and weaker bond compared to the other substituents.
B) In option B, the leaving group ability increases from tertiary amine (III) to secondary amine (11), then to primary amine (1), and finally to the amine group (NH2). This order is based on the increasing stability of the resulting leaving groups.
C) The substituents in option C are arranged in the order of increasing leaving group ability as a double bond (||) < tertiary alkyl (III) | tertiary alkyl (III). In this case, the presence of two tertiary alkyl groups makes the leaving group more stable and less likely to dissociate.
D) Option D ranks the substituents in the order of increasing leaving group ability as a single bond (|) < single bond (|) < tertiary alkyl (III) < methyl (CH3). The tertiary alkyl group is more stable than the methyl group and thus less likely to leave.
Learn more about leaving group
brainly.com/question/31027771
#SPJ11
If 20.2 {~g} of {KBr}({MM}=119.00 {~g} / {mol}) are added to a 500.0 {~mL} volumetric flask, and water is added to fill the flask, what is t
Molarity is a unit of concentration that refers to the number of moles of a substance per liter of solution. It can be calculated using the formula Molarity = moles of solute / liters of solution.
To solve the given problem, we can use this formula as follows:Given,Mass of KBr = 20.2 g Molar mass of KBr = 119.00 g/mol Volume of flask = 500.0 mL = 0.5 L We need to find the molarity of KBr in the solution. Step 1: Calculate the number of moles of KBr.
Number of moles of KBr = Mass / Molar mass= 20.2 g / 119.00 g/mol= 0.17 mol Step 2: Calculate the molarity of KBr. Molarity = Moles / Volume= 0.17 mol / 0.5 L= 0.34 M Therefore, the molarity of KBr in the solution is 0.34 M.
To know more about formula visit:
brainly.com/question/20748250
#SPJ11
If the partial vapor pressure above a food is 1.599kPa at room temperature, and the partial vapor pressure of pure water is 3.066kPa at room temperature, the water activity of the food is Round the answer to two decimal places. For example, if your answer is 0.123, enter "0.12".
The water activity of the food is approximately 0.52. A mixture is equal to the vapor pressure of the pure component at that temperature multiplied by its mole fraction in the mixture. The partial vapor pressure of the food (P) by the partial vapor pressure of pure water.
The partial water vapor pressure of a component in a mixture is equal to the vapor pressure of the pure component at that temperature multiplied by its mole fraction in the mixture.
To calculate the water activity (aw) of the food, you can divide the partial vapor pressure of the food (P) by the partial vapor pressure of pure water (P(o)). Therefore, in this case:
aw = P / P(o)
aw = 1.599 kPa / 3.066 kPa
aw ≈ 0.52
Therefore, the water activity of the food is approximately 0.52.
To know more about water vapor:
https://brainly.com/question/12894696
#SPJ4
Which of the following describes the relationship between the following tow structures? CH3−CH(Cl)−CH(CH3)−CH2−CH3 and CH3−CH(CH3)−CH(Cl)−CH2−CH3 resonance fo different compounds with different compositions identical strcutures constitutional isomers
The relationship between CH3−CH(Cl)−CH(CH3)−CH2−CH3 and CH3−CH(CH3)−CH(Cl)−CH2−CH3 can be described as constitutional isomers.
Constitutional isomers are molecules that share the same molecular formula but exhibit differences in the arrangement or connectivity of their atoms.
Resonance structures are compounds that have identical structures but different compositions. They are compounds that have the same bonding arrangement but different locations of electrons.
In the case of the given two structures, CH3−CH(Cl)−CH(CH3)−CH2−CH3 and CH3−CH(CH3)−CH(Cl)−CH2−CH3, they are not resonance structures since their bonding arrangements are not identical.
Structural isomers or constitutional isomers have the same atoms but different bonds. In other words, they have the same molecular formula but different structural formulae.
Thus, the given structures, CH3−CH(Cl)−CH(CH3)−CH2−CH3 and CH3−CH(CH3)−CH(Cl)−CH2−CH3, are constitutional isomers. They have the same molecular formula, C7H16Cl, but different bonding arrangements or connectivity.
The question should be:
Which of the following describes the relationship between the following tow structures? CH3−CH(Cl)−CH(CH3)−CH2−CH3 and CH3−CH(CH3)−CH(Cl)−CH2−CH3 resonance from different compounds with different compositions, identical strcutures, or constitutional isomers.
Learn more about isomers at: https://brainly.com/question/2705480
#SPJ11
determination of vitamin c: trial triiodide (moles) volume thiosulfate (ml) moles thiosulfate (moles) ascorbic acid (l) ascorbic acid (moles) ascorbic acid (g) 1 16 1.3331 2 17 1.3331 3 16 1.3331 4 16 1.3331
The determination of vitamin C using trial triiodide and thiosulfate showed consistent results, with an average of 1.3331 moles of ascorbic acid per trial.
In the given data, the experiment involved the use of trial triiodide (I3-) and thiosulfate (S2O32-) to determine the concentration of ascorbic acid, which is vitamin C. The volume of thiosulfate used in each trial was recorded, along with the moles of thiosulfate and the corresponding moles of ascorbic acid.
From the data provided, we can observe that in each of the four trials, the volume of thiosulfate used was approximately 16-17 mL, indicating a consistent amount of thiosulfate needed to react with the ascorbic acid. Additionally, the moles of thiosulfate recorded for each trial were the same at 1.3331 moles, suggesting a stoichiometric ratio between thiosulfate and ascorbic acid.
The moles of thiosulfate can be equated to the moles of ascorbic acid because they react in a 1:1 ratio. Therefore, the average moles of ascorbic acid per trial is 1.3331 moles. Since the molar mass of ascorbic acid is known (approximately 176.12 g/mol), the mass of ascorbic acid can be calculated using the moles.
By multiplying the average moles of ascorbic acid per trial (1.3331 moles) by the molar mass of ascorbic acid (176.12 g/mol), we can determine the mass of ascorbic acid per trial. Unfortunately, the mass values are not provided in the given data, so further calculations are required to determine the mass of ascorbic acid in grams.
Learn more about vitamin C
brainly.com/question/31910296
#SPJ11
At 40°c how much potassium nitrate can be dissolved on 300g of water?
The amount of potassium nitrate that can be dissolved in 300g of water at 40°C depends on the solubility of potassium nitrate at that temperature.
What is the solubility of potassium nitrate in 300g of water at 40°C?The solubility of potassium nitrate in water at a specific temperature determines the maximum amount that can be dissolved.
Solubility is the maximum concentration of a solute that can be dissolved in a solvent at a given temperature.
To determine the solubility of potassium nitrate at 40°C, we need to consult solubility tables or references that provide the solubility data for different substances at specific temperatures.
The solubility of potassium nitrate in water is temperature-dependent, meaning it may vary at different temperatures.
By referring to solubility data for potassium nitrate, we can find the specific solubility value at 40°C.
This value will indicate the maximum amount of potassium nitrate that can be dissolved in 300g of water at that temperature.
It's important to note that solubility values are usually provided in terms of grams of solute dissolved per 100 grams of water (or other solvents).
So, to calculate the actual amount of potassium nitrate that can be dissolved in 300g of water, we would need to convert the solubility value accordingly.
Learn more about solubility
brainly.com/question/31493083
#SPJ11
A clinical trial was conducted to test the effectiveness of a drug for treating insomnia in older subjects. Before treatment, 15 subjects had a mean wake time of 102.0 min. After treatment, the 15 subjects had a mean wake time of 98.7 min and a standard deviation of 23.8 min. Assume that the 15 sample values appear to be from a normally distributed population and construct a 90% confidence interval estimate of the mean wake time for a population with drug treatments. What does the result suggest about the mean wake time of 102.0 min before the treatment? Does the drug appear to be effective?
Construct the 90% confidence interval estimate of the mean wake time for a population with the treatment.
min<μ
(Round to one decimal place as needed.)
It is concluded that the drug is effective in treating insomnia in older subjects. The interval does not include the value of the mean wake time before treatment, indicating that the drug had an impact in reducing the wake time.
A 90% confidence interval estimate of the mean wake time for a population with drug treatment is given below:
Lower Bound = μ - Zα/2 (σ/√n)
Upper Bound = μ + Zα/2 (σ/√n)
μ = 98.7, Zα/2 = 1.645, σ = 23.8, n = 15
μ < 98.7 + 1.645 (23.8/√15)
μ < 98.7 + 12.32μ < 111.02
μ > 98.7 - 1.645 (23.8/√15)
μ > 98.7 - 12.32μ > 86.38
Therefore, a 90% confidence interval estimate of the mean wake time for a population with drug treatments is 86.38 < μ < 111.02.
The mean wake time before treatment was 102.0 min.
Since this value is not within the calculated 90% confidence interval.
Learn more about Upper Bound from the given link:
https://brainly.com/question/33419683
#SPJ11
You have 150.0 {~mL} of a 0.565 {M} solution of {Ce}({NO}_{3})_{4} . What is the concentration of the nitrate ions in the solution?
The molecular weight of cerium(IV) nitrate hexahydrate is 446.24 g/mol. Therefore, one mole of cerium(IV) nitrate hexahydrate contains one mole of cerium(IV) ions, which will combine with four moles of nitrate ions to form one mole of cerium(IV) nitrate hexahydrate.
The formula for the concentration of ions in a solution is C = n/V where C is the concentration of ions, n is the number of moles of ions, and V is the volume of the solution in liters. The first step in solving this problem is to calculate the number of moles of cerium(IV) nitrate hexahydrate in 150.0 mL of a 0.565 M solution. This can be done using the following formula:n = M x V n = 0.565 mol/L x 0.150 L= 0.08475 mol of cerium(IV) nitrate hexahydrate This amount contains four times as many moles of nitrate ions as cerium(IV) ions.
Therefore, the number of moles of nitrate ions is: nitrate ions = 4 x 0.08475 militate ions = 0.339 molThe volume of the solution is 150.0 mL, which is equal to 0.150 L. Using the formula given above, we can calculate the concentration of nitrate ions :C = n/V= 0.339 mol/0.150 LC = 2.26 M Therefore, the concentration of nitrate ions in the solution is 2.26 M.
To know more about nitrate ions visit:
brainly.com/question/1576805
#SPJ11
A room has a width of 14.1 feet, a length of 15.5 feet, and a ceiling height of 12.0 ft.
a) How many meters are there in 14.1 feet ?
b) You plan to install carpet in this room and measured the area of the floor to be 219 ft² , but the carpet store infos you they only supply carpet in square meters. How many square meters are in the room?
c) You also need to know how the air flow will work in this room and deteined the volume of the room to be 2620 ft³ , but the air flow is based off of cubic meters. How many cubic meters are in this room?
d) The average flow rate for this room's air conditioning unit is 3.07 m³/s . How many seconds will it take for the air conditioner to cycle the volume of air in the room?
e) If the density of dry air is 1.28 kg/m³ , then what is the mass of the air in the room, in kg , that the air conditioning unit has to move?
a) 14.1 feet is equal to 4.298 meters.
1 foot = 0.3048 meters
14.1 feet = 14.1 × 0.3048 = 4.298 meters.
b) The area of the room in square meters is 20.3449 square meters.
1 square foot = 0.092903 square meters
219 square feet = 219 × 0.092903 = 20.3449 square meters.
c) The volume of the room in cubic meters is 74.1038 cubic meters.
1 cubic foot = 0.0283168 cubic meters
2620 cubic feet = 2620 × 0.0283168 = 74.1038 cubic meters.
d) The time taken for the air conditioning unit to cycle the volume of air in the room is 24.1065 seconds.
The volume of air in the room is 74.1038 cubic meters and the average flow rate of the air conditioning unit is 3.07 m³/s.
Time = Volume ÷ Flow rate
Time = 74.1038 ÷ 3.07 = 24.1065 seconds.
e) The mass of the air in the room that the air conditioning unit has to move is 94.7227 kg.
Density of dry air = 1.28 kg/m³ and the volume of the room is 74.1038 cubic meters.
Mass = Density × Volume
Mass = 1.28 × 74.1038 = 94.7227 kg.
To know more about square foot visit:
https://brainly.com/question/10985264
#SPJ11
A 4.006 gram sample of an organic compound containing C,H and O is analyzed by combustion analysis and 6.672 grams of CO2 and 2.185grams of H2O are produced. In a separate experiment, the molecular weight is found to be 132.1 amu. Deteine the empirical foula and the molecular foula of the organic compound. When 2.918 grams of a hydrocarbon, CxHy, were burned in a combustion analysis apparatus, 10.02grams of CO2 and 1.641 grams of H2O were produced. In a separate experiment, the molecular weight of the compound was found to be 128.2 amu. Deteine the empirical foula and the molecular foula of the hydrocarbon.
The empirical formula of the hydrocarbon is CH, and the molecular formula is C10H10.
The empirical formula and molecular formula is determined through the following steps:
1. Organic Compound Containing C, H, and O:
Step 1: Determine the number of moles of CO2 and H2O produced in the combustion analysis.
Molar mass of CO2: 12.01 g/mol (C) + 2 * 16.00 g/mol (O) = 44.01 g/mol
Number of moles of CO2 = 6.672 g / 44.01 g/mol = 0.1514 mol
Molar mass of H2O: 2 * 1.01 g/mol (H) + 16.00 g/mol (O) = 18.02 g/mol
Number of moles of H2O = 2.185 g / 18.02 g/mol = 0.1211 mol
Step 2: Determine the number of moles of carbon and hydrogen in the organic compound.
Since the combustion of organic compounds produces CO2 and H2O, we can use the stoichiometry of the reaction to determine the number of moles of carbon and hydrogen.
From the balanced equation:
C: 1 mol of organic compound -> 1 mol of CO2
H: 1 mol of organic compound -> 2 mol of H2O
Number of moles of carbon = 0.1514 mol
Number of moles of hydrogen = 2 * 0.1211 mol = 0.2422 mol
Step 3: Determine the empirical formula.
To find the empirical formula, we need to determine the simplest whole-number ratio of carbon, hydrogen, and oxygen atoms.
The empirical formula represents the relative number of atoms of each element in the compound.
Carbon: 0.1514 mol / 0.1514 mol = 1
Hydrogen: 0.2422 mol / 0.1514 mol = 1.6 (approx.)
Oxygen: We know the total mass of the compound and the mass of carbon and hydrogen. So, the mass of oxygen can be calculated by subtracting the mass of carbon and hydrogen from the total mass of the compound.
Total mass of the compound = 4.006 g + 6.672 g + 2.185 g = 12.863 g
Mass of carbon = 0.1514 mol * 12.01 g/mol = 1.817 g
Mass of hydrogen = 0.2422 mol * 1.01 g/mol = 0.244 g
Mass of oxygen = 12.863 g - 1.817 g - 0.244 g = 10.802 g
Now, we can convert the masses of carbon, hydrogen, and oxygen to moles:
Moles of carbon = 1.817 g / 12.01 g/mol = 0.1513 mol
Moles of hydrogen = 0.244 g / 1.01 g/mol = 0.2416 mol
Moles of oxygen = 10.802 g / 16.00 g/mol = 0.6751 mol
The simplest whole-number ratio of carbon, hydrogen, and oxygen is approximately 1:2:1. So, the empirical formula of the compound is CH2O.
Step 4: Determine the molecular formula.
To determine the molecular formula, we need the molecular weight of the compound. Given that the molecular weight is 132.1 amu, we can compare the molar mass of the empirical formula (CH2O) with the molecular weight.
Molar mass of CH2O: 12.01 g/mol (C) + 2 * 1.01 g/mol (H
) + 16.00 g/mol (O) = 30.03 g/mol
Now, we can calculate the molecular formula:
Molecular formula = (Molecular weight) / (Empirical formula weight)
= 132.1 amu / 30.03 g/mol
= 4.398
Since the result is close to 4, we can multiply the empirical formula by 4 to obtain the molecular formula.
Molecular formula = 4 * CH2O
= C4H8O4
Therefore, the empirical formula of the organic compound is CH2O, and the molecular formula is C4H8O4.
2. Hydrocarbon CxHy:
Using similar steps as above, we can solve for the empirical and molecular formula of the hydrocarbon CxHy.
Step 1: Determine the number of moles of CO2 and H2O produced.
Number of moles of CO2 = 10.02 g / 44.01 g/mol = 0.2276 mol
Number of moles of H2O = 1.641 g / 18.02 g/mol = 0.0910 mol
Step 2: Determine the number of moles of carbon and hydrogen.
From the balanced equation:
C: 1 mol of hydrocarbon -> 1 mol of CO2
H: 1 mol of hydrocarbon -> 2 mol of H2O
Number of moles of carbon = 0.2276 mol
Number of moles of hydrogen = 2 * 0.0910 mol = 0.1820 mol
Step 3: Determine the empirical formula.
Carbon: 0.2276 mol / 0.2276 mol = 1
Hydrogen: 0.1820 mol / 0.2276 mol = 0.8008 (approx.)
The simplest whole-number ratio of carbon and hydrogen is approximately 1:1. So, the empirical formula of the hydrocarbon is CH.
Step 4: Determine the molecular formula.
Given the molecular weight of the compound as 128.2 amu, we compare the molar mass of the empirical formula (CH) with the molecular weight.
Molar mass of CH: 12.01 g/mol (C) + 1.01 g/mol (H) = 13.02 g/mol
Molecular formula = (Molecular weight) / (Empirical formula weight)
= 128.2 amu / 13.02 g/mol
= 9.843
Since the result is close to 10, we can multiply the empirical formula by 10 to obtain the molecular formula.
Molecular formula = 10 * CH
= C10H10
Therefore, the empirical formula of the hydrocarbon is CH, and the molecular formula is C10H10.
Learn more about empirical and molecular formula
https://brainly.com/question/13058832
#SPJ11
write names for the amines shown below, using the naming styles taught in mcmurry\'s book.
The names of the amines are: N-methylbutanamine, 3-methylhexan-1-amine, and 2-ethyl-4-methylpentan-1-amine.
What are the names of the amines?In amine nomenclature, the parent chain is determined by counting the longest continuous carbon chain containing the amino group.
The substituents attached to the main chain are then named, with their positions indicated by numbers.
According to the naming styles taught in McMurry's book, the amines can be named as follows:
1. The amine with a methyl group attached to the nitrogen atom and a butyl group on the main carbon chain is named N-methylbutanamine.
2. The amine with a methyl group attached to the third carbon atom of a hexane chain is named 3-methylhexan-1-amine.
3. The amine with an ethyl group attached to the second carbon atom and a methyl group attached to the fourth carbon atom of a pentane chain is named 2-ethyl-4-methylpentan-1-amine.
By applying the rules of amine nomenclature as taught in McMurry's book, the provided amines can be named as N-methylbutanamine, 3-methylhexan-1-amine, and 2-ethyl-4-methylpentan-1-amine.
Learn more about nomenclature
brainly.com/question/30560634
#SPJ11
what process occurs when the temperature of a substance is at point a increased (at constant pressure) until the substance is at point b?
When the temperature of a substance is increased (at constant pressure) from point A to point B, a phase transition occurs.
When the temperature of a substance is increased (at constant pressure), the molecules or atoms within the substance gain kinetic energy, leading to an increase in their average speed. As the temperature continues to rise, the intermolecular forces holding the substance together start to weaken, and the substance undergoes a phase transition.
During a phase transition, the substance changes from one state to another, such as from solid to liquid, liquid to gas, or vice versa. This transition occurs because the increase in temperature disrupts the balance between the intermolecular forces and the thermal energy of the substance. As the temperature reaches a critical point, the intermolecular forces are no longer able to maintain the current phase, causing the substance to undergo a transition to a different phase.
For example, when a solid substance is heated, the increased thermal energy causes the molecules or atoms to vibrate more vigorously. At a certain temperature, known as the melting point, the intermolecular forces holding the solid structure together become weaker than the thermal energy. This leads to the solid melting and transitioning into a liquid state.
The phase transition process continues until the substance reaches point B, where it stabilizes in the new phase. It is important to note that the specific temperature at which the transition occurs depends on the substance's properties, such as its molecular structure and intermolecular forces.
Learn more about phase transition
brainly.com/question/32078648
#SPJ11
8. Chlorine has a total of 17 electrons. How many
valence electrons are shown on the electron dot
diagram for chlorine?
O a. 17
Ob. 8
O c.7
Od. 1
Answer:7
Explanation:
The first shell of electrons is 2, seen in Helium, the second shell increases to 8, 17-(2+8)=7
click on an arrow that represents one of the alpha decays in the decay series of u-235.
To select the arrow representing one of the alpha decays in the decay series of U-235, I need a visual representation or options to choose from.
How does the decay series of U-235 look like?The decay series of U-235, also known as the uranium-235 decay chain, involves a series of alpha and beta decays leading to the formation of stable lead-207.
The initial step in the decay series is the alpha decay of U-235, where it emits an alpha particle (2 protons and 2 neutrons) to become Th-231.
Then Th-231 further undergoes alpha decay to become Pa-227, and the process continues through several intermediate isotopes until stable lead-207 is reached.
Learn more about: decay series
brainly.com/question/32114297
#SPJ11
1. Which of the following things is not true?
a)The centrifuge must first be loaded and balanced symmetrically
before spinning.
b)Angle Head centrifuge is the best centrifuge for urinalysis
department
The statement "Angle Head centrifuge is the best centrifuge for urinalysis department" is not necessarily true.
The choice of the best centrifuge for a urinalysis department depends on various factors such as the specific requirements of the laboratory, the volume of samples processed, the types of tests performed, and the preferences of the laboratory staff.
There are different types of centrifuges available, and each type has its own advantages and disadvantages.
Therefore, it is important to consider these factors and evaluate the different centrifuge options to determine the most suitable one for a urinalysis department.
Learn more about the centrifuges:
brainly.com/question/10472461
#SPJ11
What is the number of ({C}_{6} {H}_{12} {O}_{6}) in of a solution?
In this case, there would be approximately 6.022 x 10^22 C6H12O6 molecules in the solution.
The number of C6H12O6 molecules in a solution depends on the concentration of the solution and the volume of the solution. To determine the number of C6H12O6 molecules, we need to use Avogadro's number and the formula:
Number of molecules = concentration (in moles/L) x volume (in liters) x Avogadro's number
Avogadro's number is approximately 6.022 x 10^23 molecules/mol.
Let's assume we have a solution with a concentration of 0.1 M (moles per liter) and a volume of 1 liter. We can calculate the number of C6H12O6 molecules as follows:
Number of molecules = 0.1 M x 1 L x (6.022 x 10^23 molecules/mol)
Number of molecules = 6.022 x 10^22 molecules
So, in this case, there would be approximately 6.022 x 10^22 C6H12O6 molecules in the solution.
It's important to note that the concentration and volume of the solution will vary depending on the specific scenario. By adjusting the concentration and volume values, you can calculate the number of C6H12O6 molecules accordingly.
For more such questions molecules visit;
https://brainly.com/question/475709
#SPJ8
According to valence bond theory, a chemical bond generally results from the overlap of two half-filled orbitals with spin-pairing of the valence electrons.
a. True
b. False
According to valence bond theory, a chemical bond generally results from the overlap of two half-filled orbitals with spin-pairing of the valence electrons. This statement is True.
Valence bond theory is one of the two theories used to explain chemical bonding between atoms in molecules. The main premise of valence bond theory is that covalent bonds are formed when orbitals of two atoms overlap, and the shared electrons are in a region of high electron density between the nuclei. These overlapping orbitals are called hybrid orbitals. This theory is also based on quantum mechanics and explains the idea of spin-pairing of valence electrons.
Valence bond theory is responsible for predicting the geometry of molecules and the magnetic properties of molecules. The theory is also used to explain the reason why some molecules have stronger bonds than others. Valence bond theory is important in explaining the properties of organic molecules.
Learn more about valence electrons from the given link:
https://brainly.com/question/31264554
#SPJ11
The enthalpy of solution, ΔH sol,
, is defined as: Write the hydrolysis reaction of CaO : A solution resists the change in pH : What method can we use to deteine the orders of the reactions: Iny chemical reaction in which water is one of the reactant is called:
The enthalpy of solution, ΔHsol, is the change in enthalpy when a solute dissolves in a solvent. The enthalpy of solution can be endothermic or exothermic depending on the nature of the solute and solvent.
The hydrolysis reaction of CaO can be written as CaO + H2O → Ca(OH)2Hydrolysis is a chemical reaction in which water is used to break down or decompose a chemical compound. It is a type of reaction that involves a transfer of electrons from one molecule to another. Hydrolysis is used in many industrial processes, including the production of soap and the refining of sugar. The order of the reaction is determined by comparing the initial rates at different concentrations.
Water as one of the reactants in any chemical reaction is called a hydrolysis reaction. Hydrolysis can be used to break down or decompose a chemical compound, and it is used in many industrial processes, including the production of soap and the refining of sugar.
To know more about enthalpy visit:
brainly.com/question/32882904
#SPJ11
What is the actual number of grams of Al2O3 that would be produced in Part C?
Express your answer with one decimal place and with appropriate units.
The actual number of grams of Al2O3 produced in Part C is 61.2 grams.
we need to determine the actual number of grams of Al2O3 that would be produced. To do this, we'll use the given information and the stoichiometry of the reaction.
First, let's look at the balanced equation for the reaction:
2 Al + 3 CuSO4 -> Al2(SO4)3 + 3 Cu
From the equation, we can see that 2 moles of Al will produce 1 mole of Al2(SO4)3. We are given that there are 1.20 moles of Al in Part C.
To find the moles of Al2(SO4)3 produced, we can use the mole ratio from the balanced equation:
1.20 moles Al x (1 mole Al2(SO4)3 / 2 moles Al) = 0.60 moles Al2(SO4)3
Next, we need to convert the moles of Al2(SO4)3 to grams. The molar mass of Al2(SO4)3 is:
(2 x atomic mass of Al) + (3 x atomic mass of S) + (12 x atomic mass of O)
= (2 x 26.98 g/mol) + (3 x 32.07 g/mol) + (12 x 16.00 g/mol)
= 101.96 g/mol
Finally, we can calculate the grams of Al2O3 produced:
0.60 moles Al2(SO4)3 x (101.96 g Al2(SO4)3 / 1 mol Al2(SO4)3) = 61.18 g Al2O3
Learn more about grams in the link:
https://brainly.com/question/30426054
#SPJ11
The actual number of grams of Al2O3 produced in Part C is approximately 3.77 grams.
To determine the actual number of grams of Al2O3 produced in Part C, we need to consider the stoichiometry of the reaction and the given mass of Al.
The balanced chemical equation for the reaction is:
[tex]4 Al + 3 O2 - > 2 Al2O3[/tex]
From the given information, we know that 2.00 grams of Al are used in the reaction. We can use the molar mass of Al to convert the mass of Al to moles:
Molar mass of Al = 26.98 g/mol
[tex]Moles of Al = Mass of Al / Molar mass of Al[/tex]
=[tex]2.00 g / 26.98 g/mol[/tex]
≈ 0.074 moles
According to the balanced equation, the stoichiometric ratio between Al2O3 and Al is 2:4. Therefore, the moles of Al2O3 produced will be half of the moles of Al used:
[tex]Moles of Al2O3 = 0.074 moles / 2[/tex]
= 0.037 moles
To convert moles of Al2O3 to grams, we need to multiply by the molar mass of Al2O3:
Molar mass of Al2O3 = 101.96 g/mol
[tex]Mass of Al2O3 = Moles of Al2O3 * Molar mass of Al2O3[/tex]
[tex]= 0.037 moles * 101.96 g/mol[/tex]
≈ 3.77 grams
Therefore, the actual number of grams of Al2O3 produced in Part C is approximately 3.77 grams.
Learn more about Al2O3 from below link
https://brainly.com/question/30451292
#SPJ11
After heating albumin at a high temperature, does it still biologically active? Explain why
Yes, Albumin is still biologically active even after heating at high temperatures due to its ability to re-nature after being denatured.
Albumin is a globular protein found in egg white and blood serum. The protein remains biologically active even after heating at high temperatures. This is due to the fact that albumin, like most proteins, has a particular three-dimensional structure or shape. The heat changes the shape of the protein's structure, which can denature the protein and make it non-functional. However, albumin protein is unique. It doesn't lose its biologically active properties at high temperatures due to its unique ability to re-nature. The albumin molecules retain their biological activity even after being heated at high temperatures. This is because they have a significant number of sulfur atoms that stabilize the protein structure. The albumin protein molecule has a compact, spherical shape due to the arrangement of its amino acids and other groups. The biologically active form of albumin is essential for maintaining normal plasma oncotic pressure and binding and transport of different biomolecules in the body.
Overall, albumin is still biologically active even after heating at high temperatures due to its ability to re-nature after being denatured.
Learn more about globular proteins:
https://brainly.com/question/30772410
#SPJ11
calculate Ph of a buffer solution when 25 mL of 2M sodium acetate is mixed with 5mL of 1M acetic acid and diluted to 100mL of pure water . Assume pka ~ 5 for acetic acid. What would be Ph if the solution were further diluted with pure water to 1L.
The pH of the buffer solution, when initially diluted to 100 mL, is 6. If further diluted with pure water to 1 L, the pH remains 6 as the concentration of [A-] and [HA] does not change.
calculate the pH of the buffer solution, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
Volume of sodium acetate (NaAc) = 25 mL
Concentration of sodium acetate (NaAc) = 2 M
Volume of acetic acid (HAc) = 5 mL
Concentration of acetic acid (HAc) = 1 M
Volume of final solution = 100 mL
1: Calculate the moles of NaAc and HAc used:
Moles of NaAc = concentration * volume
Moles of NaAc = 2 M * 0.025 L (since 25 mL = 0.025 L)
Moles of NaAc = 0.05 mol
Moles of HAc = concentration * volume
Moles of HAc = 1 M * 0.005 L (since 5 mL = 0.005 L)
Moles of HAc = 0.005 mol
2: Calculate the total moles of acetate ions ([A-]) and acetic acid ([HA]) in the solution:
Total moles of acetate ions ([A-]) = moles of NaAc
Total moles of acetate ions ([A-]) = 0.05 mol
Total moles of acetic acid ([HA]) = moles of HAc
Total moles of acetic acid ([HA]) = 0.005 mol
3: Calculate the concentration of acetate ions ([A-]) and acetic acid ([HA]) in the solution:
Concentration of acetate ions ([A-]) = moles of acetate ions / volume of final solution
Concentration of acetate ions ([A-]) = 0.05 mol / 0.1 L (since 100 mL = 0.1 L)
Concentration of acetate ions ([A-]) = 0.5 M
Concentration of acetic acid ([HA]) = moles of acetic acid / volume of final solution
Concentration of acetic acid ([HA]) = 0.005 mol / 0.1 L
Concentration of acetic acid ([HA]) = 0.05 M
4: Calculate the pH using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
pH = 5 + log(0.5/0.05)
pH = 5 + log(10)
pH = 5 + 1
pH = 6
The pH of the buffer solution, when initially diluted to 100 mL, is 6.
If the solution is further diluted with pure water to 1 L, the pH of the buffer will remain the same since the concentration of [A-] and [HA] will not change.
Therefore, the pH will still be 6.
To know more about buffer solution refer here
https://brainly.com/question/31367305#
#SPJ11
One of the reactions used to extract zinc metal from ore is shown below. Find the mass of sulfide that can be converted into zinc oxide using 2.64 L of oxygen gas measured at 21 °Cand 101 kPa.
2 ZnS(s) + 3 02 (g) -> Z ZnO (s) + 2 SO2 (g)
Approximately 6.63 grams of sulfide can be converted into zinc oxide using 2.64 L of oxygen gas measured at 21°C and 101 kPa.
The balanced equation is:2 ZnS(s) + 3 [tex]O_2[/tex](g) → 2 ZnO(s) + 2 S[tex]O_2[/tex](g)
The stoichiometric coefficient of ZnS is 2, while that of [tex]O_2[/tex]is 3. So, the number of moles of [tex]O_2[/tex]required to react with 1 mole of ZnS is given by (3/2) moles (i.e. 1.5 moles).
At STP (i.e. standard temperature and pressure), 1 mole of any gas occupies a volume of 22.4 L.
So, at 21°C and 101 kPa, the volume of 2.64 moles of oxygen gas is given by:
V = (n x R x T)/P= (2.64 x 8.31 x 294)/101= 62.7 L
Approximately 62.7 L of oxygen gas is needed to react completely with the sulfide and convert it into zinc oxide.
Therefore, to find the mass of sulfide that can be converted into zinc oxide using 2.64 L of oxygen gas measured at 21°C and 101 kPa, we first convert 2.64 L to moles of [tex]O_2[/tex]:
PV = nRTn = PV/RTn = (101 kPa)(2.64 L) / (8.31 L kPa/mol K)(294 K)= 0.102 moles of [tex]O_2[/tex]
Since 3 moles of [tex]O_2[/tex]re needed to react with 2 moles of ZnS, then the moles of ZnS required would be:
(2/3)(0.102 mol) = 0.068 mol ZnS.
To find the mass of ZnS, we use its molar mass:MM of ZnS = 97.47 g/molmass of ZnS
= (0.068 mol)(97.47 g/mol)mass of ZnS = 6.63 g
Hence, approximately 6.63 grams of sulfide can be converted into zinc oxide using 2.64 L of oxygen gas measured at 21°C and 101 kPa.
Know more about zinc oxide here:
https://brainly.com/question/28880469
#SPJ8
