g objects and possessions can become viewed as part of the self when individuals are able to exercise power and control over them in much the same way as they control the actions of an arm or a leg describes what?

The force constant of the spring is 30.6N and the unloaded length of the spring is 0.57m.

The force constant (k) of the spring is calculated by the equation

k = (mass× gravity) / (change in length).

In this question, the mass is the difference between the two masses (2.10 kg - 0.300 kg = 1.800 kg),

And the change in length is the difference between the two lengths (0.750 m - 0.180 m = 0.570 m).

Therefore, the force constant of the spring is

(1.800 kg × 9.8 m/s²) / (0.570 m) = 30.6 N/m.

The unloaded length of the spring is determined by subtracting the length of the spring when the 0.300 kg mass hangs from it (0.180 m) from the length of the spring when the 2.10 kg mass hangs from it (0.750 m). Therefore, the unloaded length of the spring is

0.750 m - 0.180 m = 0.570 m.

Learn more about spring:

https://brainly.com/question/26838571

#SPJ4

This strategy is preferable since you need to apply force because of water balloon does indeed have a lot of motion. To bring its balloon to rest, you must apply a force over a period of time.

The physics term for a body's position nor orientation changing over time. Translation is defined as movement along this line or a curve. Rotation is a motion that modifies a body's orientation.

To let the balloon to settle after some time, according to Δp = fΔtΔp→F→Δt

In contrast to if the balloon just smacked against a hand that was immobile, you may bring the inflatable to rest by moving your hand as the balloon does. You may place the balloon on top of something bigger. The force could be less. The effort can be reduced while still causing its same acceleration change and preventing the balloon from breaking.

To know more about Motion visit:

https://brainly.com/question/26083484

#SPJ4

Part A

The momentum of the ball right before the collision is given by the equation

$p_{before,y} = mv_{before,y}$

But we know the initial velocity of the ball before the collision is just the velocity due to gravity, which is given by

$v_{before,y} = gt_0$

where $t_0$ is the time taken for the ball to fall from the initial height to the table.

This is given by

$t_0 = \sqrt{\frac{2h_i}{g}}$

Substituting this into the equation for the momentum gives

$p_{before,y} = mg\sqrt{\frac{2h_i}{g}}$

The final answer is

$p_{before,y} = m\sqrt{2gh_i} \approx 88.5 \,\text{kg m/s}$

Part B

The momentum of the ball right after the collision is given by the equation

$p_{after,y} = mv_{after,y}$

But we know the final velocity of the ball after the collision is just the velocity due to gravity, which is given by

$v_{after,y} = gt_f$

where $t_f$ is the time taken for the ball to fall from the final height to the table.

This is given by

$t_f = \sqrt{\frac{2h_f}{g}}$

Substituting this into the equation for the momentum gives

$p_{after,y} = mg\sqrt{\frac{2h_f}{g}}$

The final answer is

$p_{after,y} = m\sqrt{2gh_f} \approx 73.6 \,\text{kg m/s}$

Part C

The impulse imparted to the ball during the collision is given by

$J_y = p_{after,y} - p_{before,y}$

Substituting the values from Parts A and B gives

$J_y = 73.6 \,\text{kg m/s} - 88.5 \,\text{kg m/s} \approx -14.9 \,\text{kg m/s}$

Part D

The average force exerted on the ball during the collision is given by

$F_{avg,y} = \frac{J_y}{t_c}$

Substituting the value from Part C gives

$F_{avg,y} = \frac{-14.9 \,\text{kg m/s}}{15 \,\text{ms}} \approx -0.99 \,\text{N}$

Part E

The change in kinetic energy of the ball during the collision is given by

$K_{after} - K_{before} = \frac{p_{after,y}^2 - p_{before,y}^2}{2m}$

Substituting the values from Parts A and B gives

$K_{after} - K_{before} = \frac{73.6^2 - 88.5^2}{2 \cdot 50} \approx -3.3 \,\text{J}$

What is kinetic energy?

Kinetic energy is the energy of a moving object, equal to the work done to accelerate the object from rest to its current velocity. It is dependent on the object's mass and velocity.

To learn more about kinetic energy

Here: https://brainly.com/question/8101588

#SPJ4

"The correct statement is There are twice as many gas molecules in the liquid."

Henry's Law states that the partial pressure of a gas above a solution is precisely proportional to the mass of the gas that will dissolve into the solution.

Mathematically, C = kH × P

where, kH is Henry's constant

P = Partial pressure

Because the relationship between concentration and gas partial pressure is straightforward. Therefore, the number of molecules in the liquid will increase as partial pressure increases.

So, we can conclude that the statement there are twice as many gas molecules in the liquid, is true.

The given question is incomplete. The complete question contains options. They are 'a. The Henry’s Law constant is decreased by half. b. There are half as many gas molecules in the liquid. c. There is no change in the number of gas molecules in the liquid. d. The Henry’s Law constant is doubled. e. There are twice as many gas molecules in the liquid.'

To know more about gasses:

https://brainly.com/question/14778008

#SPJ4

The position vector is 2.76i+3.05j, the magnitude of the torque is 20.0055 N*m, and the direction of the torque is perpendicular to the plane.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force.

a. The position vector for the point where the force is applied is given by the coordinates of the point in the xy-plane. In this case, the point is at (2.76 m, 3.05 m), so the position vector is:

r = 2.76i + 3.05j

b. The torque with respect to the origin produced by F is given by the cross product of the position vector and the force vector. The magnitude of the torque is given by the formula:

τ = r x F

τ = (2.76i + 3.05j) x (7.25i - 3.03j)

τ = ((3.05)(-3.03) - (2.76)(7.25))i + ((2.76)(-3.03) - (3.05)(7.25))j

τ =20.0055 N*m

c. The direction of the torque with respect to the origin is given by the cross product of the position vector and the force vector, the direction is perpendicular to the plane formed by the position vector and the force vector. The direction of the torque is out of the plane in a direction perpendicular to the plane.

To know more about force, visit:

brainly.com/question/13191643

#SPJ4

The average force exerted by the person is 4.8 N (23 N / 4.8 s).

Force is an interaction between two or more objects that can cause a change in the motion, shape, or energy of one or both of the objects. Force can be classified into two categories: contact forces and non-contact forces. Examples of contact forces include friction, tension, and normal force. Examples of non-contact forces include gravity, magnetism, and electrostatic forces. Force is measured using the SI unit called the newton (N).

The force exerted by the person is equal to the mass of the box multiplied by the acceleration. Since the mass of the box is 10 kg and the acceleration is 2.3 m/s, the force exerted by the person is 23 N (10 kg × 2.3 m/s). This force was applied over a time of 4.8 s, so the average force exerted by the person is 4.8 N (23 N / 4.8 s).

To know more about force click-
https://brainly.com/question/12785175
#SPJ4

Answer: I think it is (C.

Explanation: (C. is more realistic because that is something i would do.

An object is 1.0 cm tall and its erect image is 3.0 cm tall, the exact magnification is 3.

Magnification measures how much the image is enlarged compared to the actual object. Magnification measures how many distinct structures can be seen in an image. Calculating magnification is as simple as dividing the eyepiece's magnification by the objective lens's.

By dividing the image height, it is possible to calculate the precise magnification of the objects. We determine it by dividing the size of the erect image by the size of the object. By dividing 3.0 cm by 1.0 cm from the above information, we can determine the precise magnification. So, the response would be 3.

exact magnification =  image height/object's height

exact magnification = 3/1

exact magnification = 3.

To know more about magnification visit:

https://brainly.com/question/3221589

#SPJ4

If a person whirls an object horizontally in a counter-clockwise direction and the string breaks at point P, the rock will follow a path that is determined by the combination of its initial horizontal velocity and its vertical velocity due to gravity.

Without additional information about the object's initial velocity and the distance from the point of release to the ground, it is difficult to determine the exact path that the rock will follow. However, it is likely that the rock will follow a curved path, where gravity causes the rock to fall vertically downward while the horizontal velocity causes it to continue moving horizontally. This path is known as a parabolic path or a projectile motion.

Learn more about horizontally clockwise problems here

https://brainly.com/question/12013236

#SPJ4

The potential difference between the two points is B. 1.6 x 10⁻⁴

The potential difference, also known as voltage, is the energy per unit charge that is transferred between two points in a circuit. We can use the formula:

V = E / Q

where V is the potential difference, E is the energy, and Q is the charge.

In this problem, we are given that the total energy gained by the electrons is 1.6 x 1010 J and the charge is Q = 1 x 10⁶ electrons. So, we can plug in these values into the formula:

V = 1.6 x 10-10 J / (1 x 10⁶) = 1.6 x 10⁻⁴ V

Therefore, the potential difference between the two points is 1.6 x 10⁻⁴ V.

Learn more about potential difference:

https://brainly.com/question/12198573

#SPJ4

Sam tried tying toys to his toy parachute. He discovered that differences in size, shape, and material affected Drag , option D.

Changes in acceleration are caused by resistance and friction. The heavier piece was slowed down by air resistance also known as drag. Drag is the force that opposes the motion of an object through a fluid.

The parachute works by creating drag, slowing the descent of the objects attached to it. The size, shape, and material of the toys that Sam tied to the parachute would affect the amount of drag created, which in turn would affect the motion of the toys as they descended.

Learn more on drag force here: https://brainly.com/question/23942493

#SPJ1

The highest energy of a 600 k absorption coefficient would be radiated at 5 micrometer wavelength.

A theoretical concept known as a black body, also spelled as blackbody, describes an item that completely absorbs all electromagnetic waves that strikes it, along with all light wavelengths. No light is returned in return.

We will treat the planets and stars, including the sun and the earth, as blackbodies even if they don't actually exist. Although they are not by definition ideal blackbodies, we can nonetheless refer to them as blackbodies for the purposes of comprehension and simplicity.

To know more about blackbody visit:

https://brainly.com/question/26512764

#SPJ4

A 60.0 kg skier is at the top of a slope 10.0 m above the ground. The gravitational potential energy of the skier-earth system is 5880J.

Given,

m=60 kg

h=10m

g=9.8

P.E=mgh

    =60*10*9.8

    =5880J

William Rankine, a Scottish engineer, and physicist from the nineteenth century coined the term potential energy. Potential energy is classified into several types, each of which is associated with a specific type of force.

Because of its position, an object, as we know, can store energy. When a bow and arrow are drawn, some energy is stored in the bow, which is responsible for the kinetic energy gained when the bow is released.

Similarly, when a spring is displaced from its equilibrium position, it gains energy, which we see as stress in our hands when we stretch it. Potential energy is a type of energy that is created as a result of an alteration.

Learn more about potential energy here:

https://brainly.com/question/11749818

#SPJ4

After the water is ejected, the squid's final speed is 3 m/s in the opposite direction.

The dislocation that such an object a particle experiences in respect to time is expressed vectorially as pace. The meter a second (m/s) is the accepted unit measure velocity profile (also known as speed). The unidirectional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

mass m₁ = 1.5 kg

initial velocity, u₁ = 0

mass of water, m₂ = 0.1 kg

initial velocity , u₂ = 0

final velocity , v₂ = 45 m/s

conservation of linear momentum;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

1.5(0) + 0.1(0) = 1.5v₁ + 45(0.1)

0 = 1.5v₁ + 4.5

1.5v₁ = -4.5

v1 = (-4.5)/1.5

v1 = -3 m/s

To know more about velocity visit:

https://brainly.com/question/28738284

#SPJ4

The time taken for the spider crawling at 630 ft/hr to travel through the 15 ft wide room is 42 hours

From the formula of speed, we can obtain a formula for calculating time as illustrated below:

Speed = Distance / time

Cross multiply

Speed × time = Distance

Divide both sides by speed

Time = Distance / speed

Using the above formula, we can obtain the time taken from the spider to travel through the room. Details as follow:

Time = Distance / speed

Time = 630 / 15

Time = 42 hours

From the calculation made above, we can conclude that the time taken is 42 hours

Learn more about time:

https://brainly.com/question/13257215

#SPJ1

Rotational equilibrium is the condition of motion where there is no angular acceleration. Since the torque is what causes the movement's acceleration, there is no total torque in the rotational equilibrium.

An object must satisfy two requirements of equilibrium in order to maintain static equilibrium. First, there must be no net force acting on the item. Second, there must be no net torque pulling on the object.

If a body meets the requirements below, it is said to be in rotational equilibrium: The forces operate within the same plane, cross at a common element, and finally, act within the same plane.

To know more about acceleration visit :

https://brainly.com/question/12550364

#SPJ4

The velocity (in cm/s) of an object which moves 44 m in 2 s is 220 cm/s.

As per the given data:

Distance given as 44 m.

Time gives as 2s.

Velocity is to be calculated.

Conversion to distance from m to cm.

1m=100 cm

44m=4400 cm

The formula for velocity is:

Velocity = Distance / Time

Velocity = 4400 / 2

=220 cm/s

The velocity of the object is 220 cm/s.

Velocity is a vector expression of the displacement that an object or particle undergoes with respect to time . The standard unit of velocity magnitude (also known as speed ) is the meter per second (m/s). Alternatively, the centimeter per second (cm/s) can be used to express velocity magnitude.

Learn more about velocity:

brainly.com/question/28738284

#SPJ4

A thermometer which always reads three degrees lower than the actual temperature is reliable but it is not valid. Thus, the correct option is E.

A thermometer is generally made up of a small, hollow glass tube. At the bottom of this tube is present a bulb, which holds a liquid such as the alcohol or mercury element. When there is an increase in the heat, the liquid present inside the bulb expands, pushing up into the tube of the thermometer. On the other hand, a decrease in heat lets the liquid contract, moving down the tube of the thermometer.

A thermometer works on the principle which states that solids and liquids tend to expand with temperature. This changes in mercury is studied on a temperature scale.

A thermometer which always reads three degrees lower than the actual temperature can be reliable but it is not valid at all.

Therefore, the correct option is E.

Learn more about Thermometer here:

https://brainly.com/question/24189042

#SPJ1

Your question is incomplete, most probably the complete question is:

What would be true of a thermometer that always reads three degrees lower than the actual temperature?

a. It is valid but not reliable

b. It is both reliable and valid

c. It is neither reliable nor valid

d. It is not valid, but you cannot determine if it is reliable from the information given

e. It is reliable but not valid

The wave fronts seen above are the result of a small vibrating moving object across a ripple tank's surface. The surface waves move quickly in contrast to the Doppler effect. The item is travelling right, which has compressed the waves at the right.

Doppler Effect is the term used to describe the shift in wave frequency caused by the relative motion of an incident wave and its observer.

One of the most typical examples is the sound of an ambulance or fire engine's siren. You may have observed that the pitch of a siren decreases sharply as it passes you at a high rate of speed. The siren initially approaches you while the pitch is louder.

To know more about Doppler effect visit:

https://brainly.com/question/15318474

#SPJ4

The term "musical notation" refers to the widespread symbology used to indicate how far apart long and short sounds should be from one another.

a collection of visual instructions for performing music, a visual representation of a heard or imagined musical sound, or musical notation. It usually takes the form of writing or printing and is a deliberate, comparatively time-consuming activity. One of two purposes—as a memory aid or for communication—causes its use.

Typically, Western music employs 12 notes: C, D, E, F, G, A, B, plus five flats and comparable sharps in between: C sharp/D flat (they are the same note, simply referred to differently depending on the context).

To know more about Musical Notation visit:

https://brainly.com/question/1822568

#SPJ4

Answer:

27,500 N

Explanation:

W = Fd

F = W/d = (2.2x10⁵J)/(8 m ) = 27,500 N

The differentiation, that the inner planets of the solar system are rocky while the outer planets contain a higher proportion of ice and gas, occurred in the early solar system due to the temperature gradient in the protoplanetary disk.

This occurs because in the inner regions of the disk, temperatures were too high for volatile elements such as hydrogen and helium to condense, while in the outer regions, temperatures were low enough for these elements to condense, forming the gas and ice giants.

In addition, due to the increased gravity in the inner regions of the disk, heavier elements, such as metals and rocks, were able to accumulate more easily, leading to the formation of the terrestrial planets.

Learn more about The inner and outer planets of the solar system:

https://brainly.com/question/13421990

#SPJ4

The goose weighs 21.3 pounds and travels at an average speed of 8 miles per hour (miles per hour). The goose's kinetic energy in joules is 61.86 kg m2/sec2.

Given,

Kinetic energy (K.E)=1/2mv²

where m=mass in kg,velocity =v m/sec

From data m=21.3lb

but 21.3lb =454g;  1000g=1kg

21.3lb×454g/1lb×(kg/1000g)=9.6702 kg

velocity=8.00 miles/h

1mile=1.61km; 1hour=60min =60×60 sec

8.00miles/hour ×(1 hour/60×60sec)×(1.61 km/1mile)×1000m/1km

v=3.577 m/sec

Kinetic energy (K.E)=1/2mv²

                               =1/2(9.67)(3.577 m/sec)²

                               =61.86 kg m²/sec²

∴KE=61.86 Joule

kinetic energy of the goose=61.86J

Kinetic energy is the type of energy that an object or particle possesses as a result of its motion. When work is performed on an object by applying a net force, the object accelerates and gains kinetic energy. Kinetic energy is a property of a moving object or particle that is affected by both its motion and mass. Translation (or movement along a path from one location to another), rotation about an axis, vibration, or any combination of motions are all possible.

Learn more about Kinetic energy here:

https://brainly.com/question/999862

#SPJ4

The gravitational potential energy (GPE) of the nickel will increase as it falls to the ground due to the force of gravity acting on it.

When an object falls, it gains kinetic energy, which is the energy of motion. As an object falls, it gains kinetic energy at the expense of its potential energy.

The amount of GPE gained will be equal to the mass of the nickel multiplied by the acceleration due to gravity and the change in height from the worker's pocket to the ground. Specifically, the change in GPE = 0.005 kg [tex]* 9.8 m/s^2 * 169[/tex]*  m. As the nickel falls it will accelerate and its kinetic energy will increase as well. The nickel will convert the potential energy into kinetic energy and also will gain velocity as it falls, reaching a terminal velocity.

When the nickel reaches the ground, all of its potential energy will have been converted into kinetic energy.

To learn more about GPE,

https://brainly.com/question/29490129

#SPJ4

The 27.9 kg mass experience a net force of zero. Gravitational equilibrium occurs when the gravitational force on an object is equal to zero.

Tilting an object will increase the height of its center of gravity when it is in a stable balance. When tilted, an item in unstable equilibrium will have a lower center of gravity. Finally, for objects in neutral equilibrium, the center of gravity will stay at the same height when pushed.

To find the distance at which the 27.9 kg mass experiences a net force of zero, we need to calculate the gravitational force acting on it due to the other two masses. The gravitational force between two masses m1 and m2 at distance r is given by F = Gm1m2/r^2, where G is the gravitational constant.

First, we know that the distance between the 99 kg and 404 kg masses is fixed. Let's call this distance d.

Now we can set the gravitational force acting on the 27.9 kg mass due to the 99 kg mass and the 404 kg mass equal to zero and solve for r:

0 = G*(27.9 kg)(99 kg)/r^2 + G(27.9 kg)*(404 kg)/(d-r)^2

Solving for r, we get:

r = d * sqrt(404/(404+99))

Substituting d value will give the distance at which the 27.9 kg mass experiences a net force of zero in units of m.

To know more about gravitational force visit:

brainly.com/question/3009841

#SPJ4

100.00 °F to Celsius would be 37.78 °C

The membrane's time constant is 2.87 ms. The resistance and capacitance of RC circuits are used to calculate the time constant. The time constant's value is determined in milliseconds.

The time constant is calculated using the equation,

T = R*C in seconds.

In physics and engineering, the parameter that specifies how a first-order, linear time-invariant (LTI) system reacts to a step input is known as the time constant, which is typically symbolized by the Greek letter tau. The time constant is the main property of a first-order LTI system.

To know more about  time constant visit:

https://brainly.com/question/1597456

#SPJ4

The pressure when the volume is reduced to 0.42 L is (y - b) ÷ m.

Pressure is the force per unit area applied to a surface or object. In the physical sciences, pressure is a measure of the force exerted on a surface by a fluid, such as a gas or liquid. Pressure is the result of the weight of the fluid pushing down on a surface. In physics, pressure is often expressed as the ratio of force to area. Pressure is typically measured in units of pascals (Pa) or pounds per square inch (psi). Pressure can also be measured in atmospheres (atm), bars, or torr.

The equation for the line representing the relationship between Volume (L) and (1/pressure) is y = mx + b, where m is the slope and b is the y-intercept.
Since we know the Volume (L) is 0.42, we can use this value to solve for the pressure.
Using the equation, we can calculate the pressure by solving for x:
x = (y - b) ÷ m
Therefore, the pressure when the volume is reduced to 0.42 L is (y - b) ÷ m.

To learn more about pressure
https://brainly.com/question/26101731
#SPJ4

When Ts is the time required for P to make one revolution around the Sun relative to E and Tp, Te are the times required for the revolution of P and E around the Sun, the relation between them is 1/Ts = 1/Te - 1/ Tp.

Substitute θe = ωe Ts and θp = ωp Ts in the equation θe = θp + 2 π

ωe Ts = 2 π + ωp Ts ---(1)

Substitute ωp = 2 π/ Tp and ωe = 2 π/Te

Placing above equations in (1), we have,

(2 π/Te) Ts = 2 π + (2 π/ Tp) Ts

On re-arranging, we have,

2 π/Te - 2 π/ Tp = 2 π/Ts

Eliminating 2 π in all the terms, we get,

1/Te - 1/ Tp = 1/Ts

Thus, the relation 1/Ts = 1/Te - 1/ Tp is proved.

To know more about planets:

https://brainly.com/question/18846098

#SPJ4