Given HM=24 and mHKˆ=66∘, find x and y.

Janelle can conclude that the medication used in this experiment was effective and it decreases sneezing.

A control experiment can be defined as a type of experiment in which a condition assumed to be a probable cause of an effect is compared with the same situation without involving or using the suspected condition.

A treatment group refers to a group of participants in an experiment that are exposed to some manipulation in the independent variable such as an administration of medication to a particular group.

Thus, Janelle can conclude that the medication used in this experiment was effective and it decreases sneezing because the treatment group show reduced signs of sneezing.

Read more on an experiment here: https://brainly.com/question/17542127

Answer:

$1,489,400,000,000

Step-by-step explanation:

Multiply to get the solution.

220,000,000 × 6770 = 1,489,400,000

Answer:

Agree with Sharon

Step-by-step explanation:

A terminating decimal includes numbers beyond the decimal point.

An integer is a whole number.

4 is a whole number so it's an integer which is what Sharon said.

Step-by-step explanation:

The corresponding angles theorem tells us that angles that correspond with each other are equal. In this case, B and C are corresponding angles.

(2x+8) = 60

2x = 60 - 8

2x = 52

x = 26

Answer:

[tex]9 \times 2 = 18 \: \: \\ 4 \times 5 = 20 \\ 20 + 18 = 38 \\ 38 {in}^{2} [/tex]

hi please give brainly

The triangle given is a scalene acute triangle

A triangle can be classified based on the measures of its angles and the lengths of its sides.

In this case, the angle measures of the triangle are 82, 75, and 23 degrees. Since the sum of the angles in a triangle is always 180 degrees, we can verify that these angles satisfy this condition: 82 + 75 + 23 = 180.

The triangle is not an equilateral triangle because all the sides are not of equal length.

The triangle also doesn't have one right angle so it can't be right triangle.

Now, as per the angle measures, none of the angles are right angles, but one angle is greater than 90 degree, so this triangle is not acute triangle.

So, this triangle is not an Obtuse triangle since it has no angle greater than 90 degrees.

As the triangle has no sides of equal length, it is also a Scalene triangle.

Therefore, the triangle would be classified as a Scalene acute triangle (c).

Learn more on classification of triangle here;

https://brainly.com/question/9497404

#SPJ1

Expanding each square on the left side, you have

(x cos(A) + y sin(A))² = x² cos²(A) + 2xy cos(A) sin(A) + y² sin²(A)

(x sin(A) - y cos(A))² = x² sin²(A) - 2xy sin(A) cos(A) + y² cos²(A)

so that adding them together eliminates the identical middle terms and reduces to the sum to

x² cos²(A) + y² sin²(A) + x² sin²(A) + y² cos²(A)

Collecting terms to factorize gives us

(y² + x²) sin²(A) + (x² + y²) cos²(A)

(x² + y²) (sin²(A) + cos²(A))

and sin²(A) + cos²(A) = 1 for any A, so we end up with

x² + y²

as required.

Answer:

? = 5

Step-by-step explanation:

Recall: when 2 transversal lines cuts across 3 parallel lines, the parallel lines are divided proportionally by the transversals.

Therefore:

?/10 = 3/6

Cross multiply

?*6 = 3*10

?*6 = 30

Divide both sides by 6

? = 30/6

? = 5

Answer:

Step-by-step explanation:

You need the Law of Cosines for this, namely:

[tex]x^2=21^2+14^2-2(21)(14)cos58[/tex] where x is the missing side.

[tex]x^2=441+196-311.5925[/tex] and

[tex]x^2=325.4075[/tex] so

x = 18.0 or just 18

The base of the triangular garden is calculated as 40 ft

The given parameters include:

The area of a triangle is given as;

[tex]Area \ = \frac{1}{2} \times \ base \times \ height\\\\A = \frac{1}{2} bh\\\\2A = bh\\\\b = \frac{2A}{h} \\\\Recall, \ b= 30 + h\ \ \ and \ A = 200\\\\30+ h = \frac{2(200)}{h} \\\\30 \ + h = \frac{400}{h} \\\\30h + h^2 = 400\\\\h^2 + 30h - 400= 0\\\\Factorize \ the \ above \ expression\\\\h^2 + 40h- 10h- 400 = 0\\\\h(h + 40) - 10(h + 40) = 0\\\\(h- 10)(h+40)= 0\\\\h = 10 \ \ or \ \ -40\\\\since\ the \ height \ can't \ b e\ negative\\\\h = 10 \ ft\\\\[/tex]

Now solve for 'b' = 30 ft + 10 ft  =  40 ft

Therefore, the base of the garden is 40 ft

To learn more about area of a triangle visit: https://brainly.com/question/2391510

9514 1404 393

Answer:

  C.  1

Step-by-step explanation:

The only rotation that maps the figure to itself is rotation by 360°. The rotational order is 1.

Answer:

0.1

Step-by-step explanation:

The probability value corresponding to z = 1.5 is 0.9332.

Probability is a number that expresses the likelihood or chance that a specific event will take place. Both proportions ranging from 0 to 1 and percentages ranging from 0% to 100% can be used to describe probabilities.

The standard normal curve is a special case of a normal curve with a mean of 0 and a standard deviation of 1. Since it is symmetric around the mean, 50% of the observations lie under the mean while the other 50% of the observations lie above the mean.

Thus the probability value corresponding to z = 1.5 is 0.9332.

Since the total probability value under the curve is 1, we subtract 0.9332 from 1 to calculate the area to the right.

P(Z>1.5)

=P(Z≤1.5)

=1−0.9332

=0.0668

Learn more about probability here:

https://brainly.com/question/30034780

#SPJ3

Answer:

1.009823361

Step-by-step explanation:

Just divide like this:

[tex] \frac{100.331}{99.355} = 1.009853361[/tex]

Answer:

$9986

Step-by-step explanation:

You got 13*4=52 quarters in 13 years.

Amount = 830*(1+0.049)^52

Amount = 9986.27

Answer:

a. The radius r = 5.42 cm and the height h = 10.84 cm

b. 553.73 cm²

c. i. Beauty ii. Design

Step-by-step explanation:

a. What would be the optimal dimensions (radius and height) to minimize surface area?

The volume of the standard container is a cylinder and its volume is V = πr²h where r = radius of container and h = height of container.

Since V = 1000 cm³,

1000 cm³ = πr²h  (1)

Now, the surface area of a cylinder is A = 2πr² + 2πrh where r and h are the radius and height of the cylinder.

From (1), h = 1000/πr².

Substituting h into A, we have

A = 2πr² + 2πrh

A = 2πr² + 2πr(1000/πr²)

A = 2πr² + 2000/r

To maximize A, we differentiate A with respect to r and equate to zero to find the value of r at which A is maximum.

So, dA/dr = d[2πr² + 2000/r]/dr

dA/dr = d[2πr²]/dr + d[2000/r]/dr

dA/dr = 4πr - 2000/r²

Equating the equation to zero, we have

4πr - 2000/r² = 0

4πr = 2000/r²

r³ = 2000/4π

r = ∛(1000/2π)

r = 10(1/∛(2π))

r = 10(1/∛(6.283))

r = 10/1.8453

r = 5.42 cm

To determine if this value of r gives a minimum for A, we differentiate dA/dr with respect to r.

So, d(dA/dr)/dr = d²A/dr²

= d[4πr - 2000/r²]/dr

= d[4πr]/dr - d[2000/r²]/dr

= 4π  + 4000/r³

Substituting r³ = 2000/4π into the equation, we have

d²A/dr² = 4π  + 4000/r³ = 4π  + 4000/(2000/4π) = 4π  + 2 × 4π = 4π + 8π = 12π > 0

Since d²A/dr² = 12π > 0, then r = 5.42 cm gives a minimum for A.

Since h = 1000/πr²

h = 1000/π(5.42)²

h = 1000/92.288

h = 10.84 cm

So, the radius r = 5.42 cm and the height h = 10.84 cm

b. What would the surface area be?

Since the surface area, A = 2πr² + 2πrh

Substituting the values of r and h into A, we have

A = 2πr² + 2πrh

A = 2πr(r + h)

A = 2π5.42(5.42 + 10.84)

A = 10.84π(16.26)

A = 176.2584π

A = 553.73 cm²

c. Suggest at least two reasons why this is different from the ice cream packaging that you see in the stores.​

i. Beauty

ii. Design

Answer:

Apply Hooke's Law to the integral application for work: W = int_a^b F dx , we get:

W = int_a^b kx dx

W = k * int_a^b x dx

Apply Power rule for integration: int x^n(dx) = x^(n+1)/(n+1)

W = k * x^(1+1)/(1+1)|_a^b

W = k * x^2/2|_a^b

From the given work: seven and one-half foot-pounds (7.5 ft-lbs) , note that the units has "ft" instead of inches.   To be consistent, apply the conversion factor: 12 inches = 1 foot then:

2 inches = 1/6 ft

1/2 or 0.5 inches =1/24 ft

To solve for k, we consider the initial condition of applying 7.5 ft-lbs to compress a spring  2 inches or 1/6 ft from its natural length. Compressing 1/6 ft of it natural length implies the boundary values: a=0 to b=1/6 ft.

Applying  W = k * x^2/2|_a^b , we get:

7.5= k * x^2/2|_0^(1/6)

Apply definite integral formula: F(x)|_a^b = F(b)-F(a) .

7.5 =k [(1/6)^2/2-(0)^2/2]

7.5 = k * [(1/36)/2 -0]

7.5= k *[1/72]

k =7.5*72

k =540

To solve for the work needed to compress the spring with additional 1/24 ft, we  plug-in: k =540 , a=1/6 , and b = 5/24 on W = k * x^2/2|_a^b .

Note that compressing "additional one-half inches" from its 2 inches compression is the same as to  compress a spring 2.5 inches or 5/24 ft from its natural length.

W= 540 * x^2/2|_((1/6))^((5/24))

W = 540 [ (5/24)^2/2-(1/6)^2/2 ]

W =540 [25/1152- 1/72 ]

W =540[1/128]

W=135/32 or 4.21875 ft-lbs

Step-by-step explanation:

Answer:

9

Step-by-step explanation:

90+81+mising angle=180, missing angle is 9

Answer:

Step-by-step explanation:

Answer:

A

Step-by-step explanation:

The numerical coefficient is sqrt(8/3), so all you have eliminated is D.

Now you have to consider the literal all by itself.

sqrt(x^2)/sqrt(x) can be written as (sqrt(x^2/x)) = sqrt(x)

x^2 when divided by x leaves x

another way of looking at it is sqrt(x)*sqrt(x) / sqrt(x) = sqrt(x)

So the answer is sqrt(8/3 * x)

Answer: y=2/3X- 4/3

Step-by-step explanation:

Slope = (4-2)/(4-1)=2/3

Y-2=2/3(x-1)

Y-2=2/3x-2/3

Y=2/3X-2/3+2

Y=2/3X-4/3

Answer:

280.8997

Step-by-step explanation:

cross section = 2*15*5+2*(25/360)*15*15*pi+5*(25/360)*2*pi*15

= 280.8997

Total surface area of prism is 280.890cm²

A solid object's surface area is a measurement of the overall space that the object's surface takes up, and it is always expressed in square units.

The term "surface area" is sometimes used to refer to "total surface area".

Find the sector angle in radians

α = 25× (π/180)

α = (25π)/(180) rad

Find the area of the prism:

A = 2×15×5 + 15×15×α + 5×15×α

A = 150 + 15×15×(25π)/(180) + 5×15×(25π)/(180)

A = 280.890cm²

To know more about total surface area please visit:

https://brainly.in/question/15911106

#SPJ2

its everything between 196 and 258 seconds (at max 31secs away from the mean). imagine straight upward lines separating this area from the rest.

34% would be way too low, 95 and above way too much.

only 68% is remotely plausible.

Answer:

a) the probability that the defective board was produced during the first hour of operation is [tex]\frac{1}{10}[/tex] or 0.1000

b) the probability that the defective board was produced during the  last hour of operation is [tex]\frac{1}{10}[/tex] or 0.1000

c) the required probability is 0.2000

Step-by-step explanation:

Given the data in the question;

During a specific ten-hour period, one defective circuit board was found.

Lets X represent the number of defective circuit boards coming out of the machine , following Poisson distribution on a particular 10-hours workday which one defective board was found.

Also let Y represent the event of producing one defective circuit board, Y is uniformly distributed over ( 0, 10 ) intervals.

f(y) = [tex]\left \{ {{\frac{1}{b-a} }\\\ }} \right _0[/tex];   ( a ≤ y ≤ b )[tex]_{elsewhere[/tex]

= [tex]\left \{ {{\frac{1}{10-0} }\\\ }} \right _0[/tex];   ( 0 ≤ y ≤ 10 )[tex]_{elsewhere[/tex]

f(y) = [tex]\left \{ {{\frac{1}{10} }\\\ }} \right _0[/tex];   ( 0 ≤ y ≤ 10 )[tex]_{elsewhere[/tex]

Now,

a) the probability that it was produced during the first hour of operation during that period;

P( Y < 1 )   =   [tex]\int\limits^1_0 {f(y)} \, dy[/tex]

we substitute

=    [tex]\int\limits^1_0 {\frac{1}{10} } \, dy[/tex]

= [tex]\frac{1}{10} [y]^1_0[/tex]

= [tex]\frac{1}{10} [ 1 - 0 ][/tex]

= [tex]\frac{1}{10}[/tex] or 0.1000

Therefore, the probability that the defective board was produced during the first hour of operation is [tex]\frac{1}{10}[/tex] or 0.1000

b) The probability that it was produced during the last hour of operation during that period.

P( Y > 9 ) =    [tex]\int\limits^{10}_9 {f(y)} \, dy[/tex]

we substitute

=    [tex]\int\limits^{10}_9 {\frac{1}{10} } \, dy[/tex]

= [tex]\frac{1}{10} [y]^{10}_9[/tex]

= [tex]\frac{1}{10} [ 10 - 9 ][/tex]

= [tex]\frac{1}{10}[/tex] or 0.1000

Therefore, the probability that the defective board was produced during the  last hour of operation is [tex]\frac{1}{10}[/tex] or 0.1000

c)

no defective circuit boards were produced during the first five hours of operation.

probability that the defective board was manufactured during the sixth hour will be;

P( 5 < Y < 6 | Y > 5 ) = P[ ( 5 < Y < 6 ) ∩ ( Y > 5 ) ] / P( Y > 5 )

= P( 5 < Y < 6 ) / P( Y > 5 )

we substitute

 [tex]= (\int\limits^{6}_5 {\frac{1}{10} } \, dy) / (\int\limits^{10}_5 {\frac{1}{10} } \, dy)[/tex]

[tex]= (\frac{1}{10} [y]^{6}_5) / (\frac{1}{10} [y]^{10}_5)[/tex]

= ( 6-5 ) / ( 10 - 5 )

= 0.2000

Therefore, the required probability is 0.2000

9514 1404 393

Answer:

  C. More than 1 solution

Step-by-step explanation:

Divide the second equation by 3.

  y -x = -3

Add x.

  y = x -3

This matches the first equation exactly, meaning that any solution to the first equation is also a solution to the second equation. There are an infinite number of possibilities. There is "More than 1 solution."

Answer:

6(5+k)

Step-by-step explanation:

The sum of 5  and k

5+k

6 times the sum

6(5+k)

Answer:

B. 1 + ln 2 - ln x

General Formulas and Concepts:

Algebra II

Step-by-step explanation:

Step 1: Define

Identify

[tex]\displaystyle ln(\frac{2e}{x})[/tex]

Step 2: Simplify

Answer:

13.5

Step-by-step explanation:

Average rate of change=(f(2)-f(1))/1=-18/2^2-(-18))=13.5