Given that the temperature of a body is 527K determine the value in degree C

Answers

Answer 1

Answer:

253.85°C

Explanation:

Here is the formula for converting K to °C

527K − 273.15 = 253.85°C


Related Questions

A capacitor consists of two metal surfaces separated by an electrical insulator with no electrically conductive path through it. Why does a current flow in a resistor-capacitor circuit when the switch is closed?

Answers

Answer:

Displacement current flows in the dielectric material(insulated region)

Explanation:

Firstly a capacitor stores charge when a capacitor is charging (or discharging), current flows in the circuit. Also, there is no charge transfer in the dielectric material in the capacitor which is contradictory to the flow of current. Hence, displacement current is the current in the insulated region due to the changing electric flux.

Consider a piston filled with 3 mols of an ideal gas, kept at a constant temperature 290 K. We slowly compress the gas starting at 2 m3 and ending at 1 m3. How much work do we need to do on the gas to perform this operation

Answers

Answer: [tex]-5013.65\ J[/tex]

Explanation:

Given

No of moles [tex]n=3[/tex]

Temperature [tex]T=290\ K[/tex]

Initial volume [tex]V_1=2\ m^3[/tex]

Final volume [tex]V_2=1\ m^3[/tex]

Work done in constant temperature process is

[tex]W=nRT\ln \left(\dfrac{V_2}{V_1}\right)[/tex]

Insert the values

[tex]\Rightarrow W=3\times 8.314\times 290\ln \left (\dfrac{1}{2}\right)\\\\\Rightarrow W=-870\times 8.314\times \ln (2)\\\Rightarrow W=-5013.65\ J[/tex]

Light of frequency f falls on a metal surface and ejects electrons of maximum kinetic energy K by the photoelectric effect. If the frequency of this light is doubled, the maximum kinetic energy of the emitted electrons will be

Answers

The question is incomplete, the complete question is;

Light of frequency f falls on a metal surface and ejects electrons of maximum kinetic energy K by the photoelectric effect.

Part A If the frequency of this light is doubled, the maximum kinetic energy of the emitted electrons will be If the frequency of this light is doubled, the maximum kinetic energy of the emitted electrons will be

K/2.

K.

2K.

greater than 2K.

Answer:

2K

Explanation:

Given that the kinetic energy of photo electrons is given by;

K= E -Wo

Where;

K = kinetic energy

E= energy of incident photon

Wo = work function

But;

E= hf

Wo = fo

h= Plank's constant

f= frequency of incident photon

fo= Threshold frequency

So:

K= hf - hfo

Where the frequency of incident light is doubled;

K= 2hf - hfo

Hence, maximum kinetic energy of the emitted electrons in this case will be 2K

Maximum range of a projectile is 1.6 m. Then the velocity of projection will be..... (g=10m/s)

Answers

Answer:

4 m/s

Explanation:

From the question given above, the following data were obtained:

Maximum range (Rₘₐₓ) = 1.6 m

Acceleration due to gravity (g) = 10 m/s²

Initial velocity (u) =?

The initial velocity of the projectile can be obtained as follow:

Rₘₐₓ = u² / g

1.6 = u² / 10

Cross multiply

u² = 1.6 × 10

u² = 16

Take the square root of both side

u = √16

u = 4 m/s

Therefore, the velocity of the projectile is 4 m/s

A car is traveling at 104 km/h when the driver sees an accident 50 m ahead and slams on the brakes. What minimum constant deceleration is required to stop the car in time to avoid a pileup

Answers

a =  - 8.34 m/sec²       ( deceleration or negative)  

Equations for UAM  ( uniformly accelerated motion) are:

vf = v₀ ±  a*t           and      s  =  s₀  + v₀*t + (1/2)*a*t²

In our case, the motion is with deceleration, then

vf = v₀ - a*t       and    s = s₀  +  v₀*t  - (1/2)*a*t²  

working on these equatios we get:

vf = v₀ - a*t     (1)           s  -  s₀   =  v₀*t  - (1/2)*a*t²      (2)

v₀ - vf = a*t

t  =  (v₀ - vf)/a

By substitution of (1) in equation (2)

s  -  s₀   =  v₀ * (v₀ - vf)/a  -  (1/2) * a* [(v₀ - vf)/a]²

s  -  s₀   =  (v₀² - v₀*vf)/a  -   (1/2) * a* (1/a²)* (v₀ - vf)²

s  -  s₀   =  1/a * ( v₀² - v₀*vf ) - 1/a* (1/2)  * (v₀ - vf)²

s  -  s₀   =  1/a* [  ( v₀² - v₀*vf ) - (1/2) * (v₀ - vf)²]

a * (s  -  s₀ )  =   v₀² - v₀*vf - v₀²/2 - vf²/2 + v₀*vf

a * (s  -  s₀ )  =  (1/2) * v₀² - (1/2)*vf²

a * (s  -  s₀ )  =  (1/2) * ( v₀² - vf²)

We find an expression to calculate the minimum deceleration to stop the car in time to avoid crashing

s₀ = 50 meters            s  =  0        v₀ =  104 Km/h    vf = 0

1 Km  = 1000 m    and   1 h = 3600 sec

v₀ = 104 Km/h    =  28.88 m/sec

a  =  (1/2) [ (28.88)² - 0 ] / 0 - 50

a =  - 8.34 m/sec²       ( deceleration or negative)  

An electron is moving through a magnetic field whose magnitude is 83 x 10-5 T. The electron experiences only a magnetic force and has an acceleration of magnitude 34 x 10+13 m/s2. At a certain instant, it has a speed of 72 x 10+5 m/s. Determine the angle (less than 90°) between the electron's velocity and the magnetic field.

Answers

Answer:

the angle between the electron's velocity and the magnetic field is 19⁰

Explanation:

Given;

magnitude of the magnetic field, B = 83 x 10⁻⁵ T

acceleration of the electron, a = 34 x 10¹³ m/s²

speed of the electron, v = 72 x 10⁵ m/s

mass of electron, m = 9.11 x 10⁻³¹ kg

The magnetic force experienced by the electron is calculated as;

F = ma = qvB sinθ

where;

q is charge of electron = 1.602 x 10⁻¹⁹ C

θ is the angle between the electron's velocity and the magnetic field.

[tex]sin(\theta ) = \frac{ma}{qvB} \\\\sin(\theta ) = \frac{(9.11\times 10^{-31})(34\times 10^{13})}{(1.602\times 10^{-19})\times (72\times 10^5) \times (83 \times 10^{-5})} \\\\sin(\theta ) = 0.3235\\\\\theta =sin^{-1}(0.3235)\\\\\theta =18.9^0[/tex]

[tex]\theta \approx 19^ 0[/tex]

Therefore, the angle between the electron's velocity and the magnetic field is 19⁰

describe four energy changes that happen in the process.

Answers

Driving a motor........

chemical energy is converted into kinetic energy.

Falling off of cliff

.........gravitational potential energy is converted into kinetic energy.

Hydroelectric energy generation

.......gravitational potential energy is converted into kinetic energy (i.e. driving a generator), which is then converted into electrical energy.

Nuclear power generation

.........mass is converted into energy, which then drives a steam turbine, which is then converted into electrical energy.

In a single-slit diffraction pattern, the central fringe is 360 times as wide as the slit. The screen is 14,000 times farther from the slit than the slit is wide. What is the ratio /W, where is the wavelength of the light shining through the slit and W is the width of the slit

Answers

Answer:

0.01286

Explanation:

In a given single-slit, the central fringe (Y) is 360 times as wide as the slit (a). Then

2Y₁ = 360a

Y₁ = 360a/2

= 180a

The distance D = 14000a

In a given single-slit diffraction, the ratio = [tex]\dfrac{\lambda }{W}[/tex]

and since the angle is infinitesimally small;

sin θ ≅ tan θ = [tex]\dfrac{Y}{D}[/tex]

For the first dark fringe;

Suppose:  [tex]\dfrac{a}{2}sin \theta = \dfrac{\lambda }{2}[/tex]

then,

[tex]\dfrac{a}{2} \ \dfrac{Y_1}{D} = \dfrac{\lambda }{2}[/tex]

[tex]aY_1 = \lambda D[/tex]

[tex]\dfrac{\lambda }{a} = \dfrac{Y_1}{D}\\ \\ \\ \implies \dfrac{180\ a}{14000 \ a} \\ \\ \mathbf{\dfrac{\lambda }{a} = 0.01286}[/tex]

A hydraulic vane pump has a real flow of 20 liters per minute, a pressure of 230 bar, a pump speed of 1400 rpm. Know that the input power is 10kW and the mechanical efficiency is 88%.
a) Calculate the volumetric efficiency of the pump
b) Calculate the specific volume of the pump (cm/rev). Question 3 (2,5d): Design a pneumatic transmission system to control 02 single-acting cylinders, using 02 reversing valves 3/2 acting by push button, 02 throttle valves - one-way. Describe the working principle of the system.

Answers

Explanation:

uxirajifspytdiptig ok lhb rid0

Cuando el pistón tiene un volumen de 2x10^-4 m^3, el gas en el pistón está a una presión de 150 kPa. El área del pistón es 0.00133 m^2. Calcular la fuerza que el gas ejerce sobre el embolo del pistón.

Answers

Answer:

F = 1.128 10⁸ Pa

Explanation:

Pressure is defined by

         P = F / A

If the gas is ideal for equal force eds on all the walls, so on the piston area we have

        F = P A

We reduce the pressure to the SI system

       P = 150 kpa (1000 Pa / 1kPa = 150 103 Pa

we calculate

       F = 150 10³ / 0.00133

       F = 1.128 10⁸ Pa

Light takes 1.2 sec to get from the moon to the Earth. Assume you are looking at the moon with noticeable earth shine. If the Sun burned out, you would eventually see the crescent of the moon disappear. The earth shine part of the moon would disappear Answer 2.4 s after the crescent disappeared.

Answers

Answer:

1.2 seconds

Explanation:

Answer to the following question is 1.2 seconds

Because light from the moon takes 1.2 seconds to reach Earth, the light released from the crescent immediately before it vanishes will also take 1.2 seconds to reach Earth. As a result, the earth-shine portion of the moon will vanish 1.2 seconds after the crescent has vanished.

The water evaporated. How did that help ?

Answers

Answer:

hellooooo. hi hellooooo and programming laptops

Answer:

The molecules move and vibrate so quickly that they escape into the atmosphere as molecules of water vapor. Evaporation is a very important part of the water cycle. The Heat from the sun, or solar energy, powers the evaporation process. ... Once the water evaporates, it also helps form clouds.

Explanation:

what are the two main types of sound like soundwave​

Answers

Answer:

acoustic energy and mechanical energy

Explanation:

each type of sounds has to be tackled in their own way.

A bus moving on a straight road increases its speed uniformly from rest to 20m's over a time period of 1 min. The distance travelled during the time is (a) 150 m (b) 300 m (c) 600 m (d) 900 m​

Answers

Explanation:

Given that,

Initial velocity (u) = 0 m/sFinal velocity (v) = 20 m/sTime taken (t) = 1 minute = 60 seconds

In order to find the distance travelled, firstly we need calculate the acceleration.

v = u + at

→ 20 = 0 + 60a

→ 20 = 60a

→ 20 ÷ 60 = a

→ ⅓ m/s² = a

Now, by using the 2nd equation of motion :

s = ut + ½at²

→ s = 0(60) + ½ × ⅓ × (60)²

→ s = ⅙ × 3600

→ s = 1 × 600

→ s = 600 m

Hence, the distance travelled is 600 m.

b. Block on an incline
A block of mass mı = 3.9 kg on a smooth inclined plane of angle 38° is connected by a cord over a small frictionless
pulley to a second block of mass m2 = 2.6 kg hanging vertically. Take the positive direction up the incline and use 9.81
m/s2 for g.
What is the tension in the cord to the nearest whole number?

Answers

Block on the incline:

• net force parallel to the incline

F (para.) = m₁ g sin(38°) - T = m₁ a

where T is the magnitude of tension in the cord.

Notice that we take down-the-incline to be the positive direction, so that if the 3.9-kg block pulls the 2.6-kg block upwards, then the acceleration of the system is positive.

Suspended block:

• net vertical force

F (vert.) = T - m₂ g = m₂ a

Solve both equations for the acceleration a, set the results equal to one another, and solve for T :

a = g sin(38°) - T/m₁

a = T/m₂ - g

==>   g sin(38°) - T/m₁ = T/m₂ - g

==>   T (1/m₂ + 1/m₁) = g (sin(38°) + 1)

==>   T = g (sin(38°) + 1) / (1/m₂ + 1/m₁)

==>   T = (9.81 m/s²) (sin(38°) + 1) / (1/(2.6 kg) + 1/(3.9 kg)) ≈ 25 N

A stone with a mass of 0.100kg rests on a frictionless, horizontal surface. A bullet of mass 2.50g traveling horizontally at 500m/s strikes the stone and rebounds horizontally at right angles to its original direction with a speed of 300m/s.
A) Compute the magnitude of the velocity of the stone after it is struck.
B) Compute the direction of the velocity of the stone after it is struck. (degrees from the initial direction of the bullet)

Answers

Answer:

Explanation:

Given that:

mass of stone (M) = 0.100 kg

mass of bullet (m) = 2.50 g = 2.5  ×10 ⁻³ kg

initial velocity of stone ([tex]u_{stone}[/tex]) = 0 m/s

Initial velocity of bullet ([tex]u_{bullet}[/tex]) = (500 m/s)i

Speed of the bullet after collision ([tex]v_{bullet}[/tex]) = (300 m/s) j

Suppose we represent [tex](v_{stone})[/tex] to be the velocity of the stone after the truck, then:

From linear momentum, the law of conservation can be applied which is expressed as:

[tex]m*u_{bullet} + M*{u_{stone}}= mv_{bullet}+Mv_{stone}[/tex]

[tex](2.50*10^{-3} \ kg) (500)i+0 = (2.50*10^{-3} \ kg)(300 \ m/s)j + (0.100 \ kg)v_{stone}[/tex]

[tex](2.50*10^{-3} \ kg) (500)i- (2.50*10^{-3} \ kg)(300 \ m/s)j= (0.100 \ kg)v_{stone}[/tex]

[tex]v_{stone}= (1.25\ kg.m/s)i-(0.75\ kg m/s)j[/tex]

[tex]v_{stone}= (12.5\ m/s)i-(7.5\ m/s)j[/tex]

The magnitude now is:

[tex]v_{stone}=\sqrt{ (12.5\ m/s)^2-(7.5\ m/s)^2}[/tex]

[tex]\mathbf{v_{stone}= 14.6 \ m/s}[/tex]

Using the tangent of an angle to determine the direction of the velocity after the struck;

Let θ represent the direction:

[tex]\theta = tan^{-1} (\dfrac{-7.5}{12.5})[/tex]

[tex]\mathbf{\theta = 30.96^0 \ below \ the \ horizontal\ level}[/tex]

A solenoid has a length , a radius , and turns. The solenoid has a net resistance . A circular loop with radius is placed around the solenoid, such that it lies in a plane whose normal is aligned with the solenoid axis, and the center of the outer loop lies on the solenoid axis. The outer loop has a resistance . At a time , the solenoid is connected to a battery that supplies a potential . At a time , what current flows through the outer loop

Answers

This question is incomplete, the complete question is;

A solenoid has a length 11.34 cm , a radius 1.85 cm , and 1627 turns. The solenoid has a net resistance of 144.9 Ω . A circular loop with radius of 3.77 cm is placed around the solenoid, such that it lies in a plane whose normal is aligned with the solenoid axis, and the center of the outer loop lies on the solenoid axis. The outer loop has a resistance of 1651.6 Ω. At a time of 0 s , the solenoid is connected to a battery that supplies a potential 34.95 V. At a time 2.58 μs , what current flows through the outer loop?

Answer:

the current flows through the outer loop is 1.3 × 10⁻⁵ A

Explanation:

Given the data in the question;

Length [tex]l[/tex] = 11.34 cm = 0.1134 m

radius a = 1.85 cm = 0.0185 m

turns N = 1627

Net resistance [tex]R_{sol[/tex] = 144.9 Ω

radius b = 3.77 cm = 0.0377 m

[tex]R_o[/tex] = 1651.6 Ω

ε = 34.95 V

t = 2.58 μs = 2.58 × 10⁻⁶ s

Now, Inductance; L = μ₀N²πa² / [tex]l[/tex]

so

L = [ ( 4π × 10⁻⁷ ) × ( 1627 )² × π( 0.0185 )² ] / 0.1134

L = 0.003576665 / 0.1134

L = 0.03154

Now,

ε = d∅/dt = [tex]\frac{d}{dt}[/tex]( BA ) =  [tex]\frac{d}{dt}[/tex][ (μ₀In)πa² ]

so

ε = μ₀n [tex]\frac{dI}{dt}[/tex]( πa² )

ε = [ μ₀Nπa² / [tex]l[/tex] ] [tex]\frac{dI}{dt}[/tex]

ε = [ μ₀Nπa² / [tex]l[/tex] ] [ (ε/L)e^( -t/[tex]R_{sol[/tex]) ]

I = ε/[tex]R_o[/tex] = [ μ₀Nπa² / [tex]R_o[/tex][tex]l[/tex] ] [ (ε/L)e^( -t/[tex]R_{sol[/tex]) ]

so we substitute in our values;

I = [ (( 4π × 10⁻⁷ ) × 1627 × π(0.0185)²) / (1651.6 ×0.1134) ] [ ( 34.95 / 0.03154)e^( -2.58 × 10⁻⁶ / 144.9 ) ]

I = [ 2.198319 × 10⁻⁶ / 187.29144 ] [ 1108.116677 × e^( -1.7805 × 10⁻⁸ )

I = [ 1.17374 × 10⁻⁸ ] × [ 1108.116677 × 0.99999998 ]

I = [ 1.17374 × 10⁻⁸ ] × [ 1108.11665 ]

I = 1.3 × 10⁻⁵ A

Therefore, the current flows through the outer loop is 1.3 × 10⁻⁵ A

Answer:

1.28 *10^-5 A

Explanation:

Same work as above answer. Needs to be more precise

g A thin uniform film of oil that can be varied in thickness covers a sheet of glass of refractive index 1.52. The refractive index of the oil is 1.64. Light of wavelength 555 nm is shone from air at normal incidence on the film. Starting with no oil on the glass, you gradually increase the thickness of the oil film until the first interference maximum in the reflected light occurs. What is the thickness of the oil film at that instant

Answers

Answer:

The right solution is "84.09 nm".

Explanation:

The given values are:

Refractive index of glass,

= 1.52

Refractive index of oil (n),

= 1.64

Wavelength (λ),

= 555 nm

Now,

The thickness of the film (t) will be:

= [tex]\frac{\lambda}{4n}[/tex]

= [tex]\frac{555}{4\times 1.65}[/tex]

= [tex]\frac{555}{6.6}[/tex]

= [tex]84.09 \ nm[/tex]

b. Projectile on cliff (range)
An object of mass 5 kg is projected at an angle of 25° to the horizontal with a speed of 22 ms-1 from the top of the cliff.
The height of the cliff is 21 m. Take g, the acceleration due to gravity, to be 9.81 ms2
How far horizontally (to 1 decimal place) from the base of the cliff does the object land?

Answers

Answer:

x = 41.28 m

Explanation:

This is a projectile launching exercise, let's find the time it takes to get to the base of the cliff.

Let's start by using trigonometry to find the initial velocity

         cos 25 = v₀ₓ / v₀

         sin 25 = Iv_{oy} / v₀

         v₀ₓ = v₀ cos 25

         v_{oy} = v₀ sin 25

         v₀ₓ = 22 cos 25 = 19.94 m / s

         v_{oy} = 22 sin 25 = 0.0192 m / s

let's use movement on the vertical axis

         y = y₀ + v_{oy} t - ½ g t²

     

when reaching the base of the cliff y = 0 and the initial height is y₀ = 21 m

         0 = 21 + 0.0192 t - ½ 9.81 t²

         4.905 t² - 0.0192 t - 21 = 0

         t² - 0.003914 t - 4.2813 =0

we solve the quadratic equation

        t = [tex]\frac{ 0.003914\ \pm \sqrt{0.003914^2 + 4 \ 4.2813 } }{2}[/tex]

        t = [tex]\frac{0.003914 \ \pm 4.13828}{2}[/tex]

        t₁ = 2.07 s

        t₂ = -2.067 s

since time must be a positive scalar quantity, the correct result is

        t = 2.07 s

now we can look up the distance traveled

         x = v₀ₓ t

         x = 19.94  2.07

         x = 41.28 m

If ∆H = + VE , THEN WHAT REACTION IT IS
1) exothermic
2) endothermic​

Answers

Answer:

endothermic

Explanation:

An endothermic is any process with an increase in the enthalpy H (or internal energy U) of the system. In such a process, a closed system usually absorbs thermal energy from its surroundings, which is heat transfer into the system.

What is a measure between the difference in start and end positions?

Answers

Answer:

Displacement

General Formulas and Concepts:

Kinematics

Displacement vs Total Distance

Explanation:

Displacement is the difference between the start position and end position.

Total Distance is the entire distance traveled between the start and end position.

Topic: AP Physics 1 Algebra-Based

Unit: Kinematics

A bullet 2cm log is fired at 420m/s and passes straight a 10cm thick board exiting at 280m/s

Answers

Complete question:

A bullet 2 cm long is fired at 420m/s and passes straight through a 10.0 cm thick board, exiting at 280m/s? What is the average acceleration of the bullet through the board?

Answer:

The average acceleration of the bullet through the board is -4.083 x 10⁵ m/s²

Explanation:

Given;

initial velocity of the bullet, u = 420 m/s

final velocity of the bullet, v = 280 m/s

length of the bullet, d₁ = 2 cm

thickness of the board, d₂ = 10 cm

total distance penetrated by the bullet through the board;

d = d₁ + d₂ = 2 cm + 10 cm = 12 cm = 0.12 m

The average acceleration of the bullet through the board is calculated as;

[tex]v^2 = u^2 + 2ad\\\\2ad = v^2 - u^2\\\\a = \frac{v^2 - u^2}{2d} \\\\a = \frac{(280^2) - (420^2)}{2(0.12)} = -4.083 \times 10^{5} \ m/s^2[/tex]

Therefore, the average acceleration of the bullet through the board is -4.083 x 10⁵ m/s²

A person runs up the stairs elevating his 102 kg body a vertical distance of 2.29 meters in a time of 1.32 seconds at a constant speed.
Determine the work done by the person climbing the stair case.

Answers

Answer:

Work done = 2289.084 Joules

Explanation:

Given the following data;

Mass = 102 Kg

Height = 2.29

Time = 1.32 seconds

We know that acceleration due to gravity, g = 9.8 m/s²

a. To find the work done by the person;

Here, work would be done in the form of gravitational potential energy.

Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.

Mathematically, gravitational potential energy is given by the formula;

G.P.E = mgh

Where;

G.P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

Substituting into the formula, we have;

Work done = 102 * 2.29 * 9.8

Work done = 2289.084 Joules

find the upward force in Newton when each of these is under water(density of 1g/cm3) a lump of iron of volume 2000cm3​

Answers

Answer:

Upthrust = 19.6 N

Explanation:

When an object is immersed under water, the upward force it experience is called an upthrust. An upthrust is a force which is applied on any object in a fluid which acts in an opposite direction to the direction of the weight of the object.

Upthrust = density of liquid x gravitational force x volume of object

i.e U = ρ x g x vol

Given: ρ = 1g/[tex]cm^{3}[/tex] (1000 kg/[tex]m^{3}[/tex]), volume = 2000 c[tex]m^{3}[/tex] (0.002 [tex]m^{3}[/tex]) and g = 9.8 m/[tex]s^{2}[/tex]

So that;

U = 1000 x 9.8 x 0.002 (kg/[tex]m^{3}[/tex] x [tex]m^{3}[/tex] x m/[tex]s^{2}[/tex])

   = 19.6 Kg m/[tex]s^{2}[/tex]

U = 19.6 Newtons

The upthrust on the iron is 19.6 N.

A silicon solar cell behaves like a battery with a 0.46 V terminal voltage. Suppose that 1.0 W of light of wavelength 620 nm falls on a solar cell and that 50%% of the photons give their energy to charge carriers, creating a current. What is the solar cell's efficiency that is, what percentage of the energy incident on the cell is converted to electric energy?

Answers

We have that the percentage of the energy incident on the cell that is converted to electric energy is

[tex]n=11\%[/tex]

From the question we are told that:

Voltage [tex]V=0.46V[/tex]

Power of light [tex]P=1.0W[/tex]

Wavelength [tex]w=620nm[/tex]

50 \% of the photons give their energy to charge carriers,

Generally, the equation for number of Protons is mathematically given by

[tex]N_p=\frac{P}{E}[/tex]

[tex]N_p=\frac{P \lambda}{hc}[/tex]

[tex]N_p=\frac{1}{(6.62*10^(-34)}*\frac{3*10^8}{(570*10^{-9}))}[/tex]

[tex]N_p=2.87*10^{18}[/tex]

Generally, the equation for Number of electron is mathematically given by

[tex]N_e=50 \% *n_3[/tex]

[tex]N_e=0.5*2.87*10^{18}[/tex]

[tex]N_e=1.43*10^{18}[/tex]

Therefore

Total current

[tex]I= e*N_e[/tex]

Where

e=electron Charge

Therefore

[tex]I=1.43*10^{18}*1.6*10^-{19}[/tex]

[tex]I=0.230A[/tex]

Generally, the equation for Power is mathematically given by

[tex]P=VI[/tex]

[tex]P=0.46*0.230[/tex]

[tex]P=0.1058W[/tex]

Therefore

Efficiency

[tex]n=\frac{0.1058}{1}[/tex]

[tex]n=0.1058[/tex]

[tex]n=11\%[/tex]

In conclusion

The percentage of the energy incident on the cell that is converted to electric energy is

[tex]n=11\%[/tex]

For more information on this visit

https://brainly.com/question/1252435

A force of 1000N is used to kick a football of mass 0.8kg find the velocity with which the ball moves if it takes 0.8 sec to be kicked.​

Answers

The velocity of the ball is 100m/s

The first step is to write out the parameters;

The force used to kick the ball is 1000N

The mass of the ball is 0.8 kg

Time is 0.8 seconds

Therefore the velocity can be calculated as follows

F= Mv-mu/t

1000= 0.8(v) - 0.8(0)/0.8

1000= 0.8v- 0.8/0.8

Cross multiply both sides

1000(0.8) = 0.8v

800= 0.8v

divide both sides by the coefficient of v which is 8

800/0.8= 0.8v/0.8

v= 1000m/s

Hence the velocity is 1000m/s

Learn more via the link below;

https://brainly.com/question/16860823?referrer=searchResults

Which of the following is a form of mechanical energy?
A. Chemical energy
B. Gravitational potential energy
C. Thermal energy
D. Nuclear energy

Answers

Answer:

B

Explanation:

no reason for this answer

B. Gravitational potential energy

Vặt nhỏ được ném lên từ điểm A trên mặt đất với vận tốc đầu 20m/s theo phương thẳng đứng. Xác định độ cao của điểm O mà vật đạt được. Bỏ qua ma sát

Answers

Explanation:

mặt đất với vận tốc ban đầu 20m/s. Bỏ qua mọi ma sát, lấy g = 10 m/s2. Độ cao cực đại mà vật đạt được là.

Which of the following is true about resistivity of any given metal? depends on its temperature. varies nearly linearly with temperature. has units of ohm-meter. A. II and III only B. I and II only C. I and III only D. I, II and III E. III only

Answers

___________________

[tex]\huge{\underline{\sf{\blue{Answer}}}}[/tex]

___________________

[tex]\sf{C. \:I\: and \:III}[/tex]

___________________

The correct statements about resistivity of any given metal are The resistivity of metal is more than that of insulators and Metals can carry electricity more easily than insulators. Option a and c are correct answer.

Resistivity is a property that quantifies how strongly a material opposes the flow of electric current. Metals have lower resistivity compared to insulators. This means that metals allow electric current to flow more easily than insulators.

Due to their lower resistivity, metals have higher electrical conductivity and can carry electric current more easily compared to insulators. Insulators, on the other hand, have high resistivity and hinder the flow of electric current. Resistivity is a material-specific property and varies for different substances. Metals, such as copper or aluminum, have low resistivity and are often used as conductors for transmitting electricity. Insulators, such as rubber or plastic, have high resistivity and are used to prevent the flow of electricity.

Learn more about Resistivity here:

https://brainly.com/question/13735984

#SPJ2

The complete question is, "Which of the following statements are true about resistivity of any given metal?

A. The resistivity of metal is more than that of insulators.

B. The insulators and metals have same resistivity.

C. Metals can carry electricity more easily than insulators.

D. The resistivity of insulators is more than that of metals.

Two forces A and B act at a point. If their resultant is [given by] (B - A) in the direction of B, then
A. A and B are equal
B. A is greater than B
C. the angle between A and B is 0°
D. the angle between A and B is 90°
E. the angle between A and B is 180°

Answers

Sorry I don’t know but it’s on photo mouth camera if you use it
Other Questions
qu trnh nhn thc l g v kt hn ng tnh l g PLEASE I NEED ANSWER WILL GIVE POINTS AND EVERYTHING Read the following paragraph:I had been student council president for a month now, and the meetings covered a wide variety of topics. Today's meeting had run long, and when we opened the floor up to questions, Alan's hand shot up immediately. Nobody else had a question. Great, I thought sarcastically. It will probably be something about how we didn't use Robert's Rules of Order correctly, or something equally boring.What is the most likely motive for the narrator's reaction in the final sentence?A.He is intimidated by Alan's usual questions.B.He believes Alan asks too many questions.C.He is afraid to answer questions publicly.D.He was hoping nobody would ask any questions. Which correctly completes the diagram? Spanish colonial cities grew around mining centers. Converting Peruvians to Christianity was the Spaniards' main interest. South American population increased in the late 16th century. Mining drew many farmers away from their agricultural lands. 1. What describes hypospadias? 1 point A. Scrotal lymphedema B. Undescended testicle C. Ventral urinary meatus D. Inflammation of the prepuce2. Which of the following is an ocular change that may be hyperthyroidism? A. Ptosis B. Open angle glaucoma C.Exophthalmos D.Presbyopia If the product of a and cis negative, you subtract the factors of the product to arrive at c. True False .Use the table provided to find an exponential model (x) = ab^x, where is the population of Arizona, and the input is the number of years since 2004. Approximate to the thousandths place.(x) = 5,939,292 (1.035)x(x) = 5,739,879 (0.965)x(x) = 5,739,879 (1.035)x(x) = 5,739,879 (0.035)x Anyone wanna help with this please ? Find the solution: | x + 1 | + 16 = 10 5-8 | La visita de los primos Complete the following conversation with the correct formsof the verbs ser or estar.Buenos das, Carmen. Cmot?-Muy bien, Luis. Y t?No muy bien. Youn poco nervioso porque tengo un examen muy difcil.- Quinesesos chicos queen tu casa?Ah! Ellosmis primos Luis y Alberto. Ellosbolivianos, pero hablan ingls muy bien.- Y este coche, de quin? De mi hermano mayor. Ya sabes que lrico.- Cunto tiempo van aaqu tus primos?Solamente una semana. Tienen que volver a Bolivia, porqueestudiantes y tienen exmenes muy pronto. Which chemical can remove color of red/Pink phenol and make it clear like water transparent? 5. How many moles are present in 4.20x10^24 atoms of Pb Vera PLC uses exponential smoothing with trend to forecast monthly sales. At the end of September, Small Industries PLC hopes to forecast sales for October. The trend through August has been 500 additional unit sales per month (Tt-1). Average sales have been 1800 units per month (St-1). The demand for September was 1780 units (AL). Vera PLC uses alpha (a) - 0.2 and Beta (B)-0.3. Note: This Forecasting Question relates to Questions 65-67. Following the first stage of the trend-adjusted exponential smoothing method, smooth the level of the series and calculate St for Vera PLC. (retain your answer and calculation for:________a) 1985 b) 2563 c) 2196 d) 2144 e) 2373 1. The word voice, when it is used as a verb, means "to speak out loud."Explain how this word is changed by the addition of the prefix un- and thesuffix -ed.(My perspective grade 10 volume 1 house taken over word study pg.46) 1. Answer the following questions. What do you mean by a state? ght to ht, we plic pl a. 35 Ou b. What are the basic elements of a state? Why territory and the population are the compulsory om ony a C. of a state? nuni nal d. What do you mean by a government? ur What are the differences between a state and a governme ire e. f. What is sovereignty of a state? 8 . Why is constitution essential for a state? Multiple choice3 You _____ follow your doctor's pieces of advice if you want to get well soon.shouldwill be able toneeds tomight X^4+x^3-6x^2-14x-12=0 Make a list of possible rational roots. Test the possible roots until you find one that produces a remainder of 0 Write the resulting cubic function. Use synthetic division to find a second root that will reduce the cubic expression to a quadratic expression I NEEEDDD HELPPP!!! someone please help me outttt What is the name of the compound shown below?A. 2-penteneB. 1-propeneC. 2-propeneD. 1-pentene Find COSout ofInstructions: Find the value of the trigonometric ratio. Make sure tosimplify the fraction if needed.A9B4140Cos A "Healthy environment supports healthy and happy life." Justify it