Given the law of conservation of energy, what happens when a 200°C iron bar is placed in thermal contact with a 30°C block of wood?

The final temperature of the mixture given that 25 g of water at 25 °C is mixed with 25 g of water at 65 °C, is 45 °C

The final temperature of the mixture can be obtained by calculating the equilibrium temperature of the mixture. This is shown below:

Heat loss by warm water = Heat gain by cold water

MᵥᵥC(Tᵥᵥ - Tₑ) = MC(Tₑ - T)

Cancel out C

Mᵥᵥ(Tᵥᵥ - Tₑ) = M(Tₑ - T)

25× (65 - Tₑ) = 25 × (Tₑ - 25)

Cancel out 25

65 - Tₑ = Tₑ - 25

Collect like terms

65 + 25 = Tₑ + Tₑ

90 = 2Tₑ

Divide both side by 2

Tₑ = 90 / 2

Tₑ = 45 °C

Thus, we can conclude that the final temperature the mixture is 45 °C

Learn more about temperature:

https://brainly.com/question/14281142

#SPJ1

Answer:

The increase in human population has impacted Earth's resources in several major ways:

• Increased demand for food, water, and shelter. A larger population requires massive increases in food, water, and living spaces which strains natural resources and infrastructure. Producing enough food alone is a significant challenge.

• Accelerated consumption of resources. As population grows, the use of resources like forests, minerals, fossil fuels also increases rapidly to meet demands. This accelerated depletion of resources threatens long term sustainability.

• Increased pollution. A bigger population produces more pollution, waste, emissions, and environmental degradation as a byproduct of energy usage, transportation, industrialization, and land/resource use. This pollution harms ecosystems and contaminates the air, water and land.

• Biodiversity loss. As natural habitats are destroyed or fragmented to enable more human use, many plant and animal species lose their homes and face a higher risk of extinction. Tropical rainforests, in particular, have been heavily impacted.

• Inequality. While resources are limited, population growth often exacerbates inequality in access to and distribution of resources. Poor or developing regions typically have the highest populations but fewest resources per capita.

• Migration and conflict. Shortages of resources in certain areas or regions may lead to migration, economic troubles, social unrest, and in some cases even resource conflicts or wars.

• Slower development. Extremely rapid population growth rates make it difficult for governments, organizations and societies to effectively manage development, improve standards of living, advance technology, and make other progress at an optimal pace. Slower, more stabilized population growth may enable a higher overall quality of life.

So in many profound and troubling ways, increased population size has created immense pressures on Earth's resources and made it more difficult to meet present and future needs in a sustainable manner. Most experts agree that slowing population growth is critical to ensuring resource security for future generations.

Explanation:

Enthalpy (H), entropy (S), and free energy (G) are thermodynamic properties that describe the behavior of a system.

Enthalpy (H) is the total heat content of a system, including both internal energy and the energy required to create a system's volume and pressure. It is often used to describe heat transfer in chemical reactions. Entropy (S) is a measure of the disorder or randomness in a system. It reflects the number of ways in which the molecules of a system can be arranged, and it generally increases with temperature.

Free energy (G) is a measure of the energy available to do work in a system. It accounts for the enthalpy and entropy of a system and can be used to predict whether a reaction is spontaneous or non-spontaneous. All three properties are related to the state of a system and can be used to predict the behavior of a reaction. Enthalpy and entropy are related by the Gibbs-Helmholtz equation, and free energy is related to both enthalpy and entropy by the Gibbs free energy equation.

While all three properties relate to the behavior of a system, they differ in terms of what they measure and how they are used in calculations. Enthalpy is concerned with the total energy content of a system, while entropy measures the degree of disorder. Free energy is a measure of the energy available to do work in a system and can predict whether a reaction will occur spontaneously.

To know more about the Enthalpy, here

https://brainly.com/question/31663014

#SPJ1

A scientist can conduct an experiment by infecting hair follicle cells with the VarGoViv virus in vitro and then treating them with different concentrations of the electrolyte solutions.

The recovery of hair follicle cells can be assessed by measuring various parameters such as cell viability,the morphology, and proliferation rates. The experiment can be designed to test different types of electrolytes such as sodium, potassium, magnesium, and calcium ions at varying concentrations. By analyzing the data, the scientist can determine the optimal concentration and type of electrolyte solution that promotes the recovery of the hair follicle cells from VarGoViv virus infection.

To know more about electrolyte solutions, here

brainly.com/question/13717567

#SPJ1

--The complete Question is, What is the effect of different concentrations of electrolyte solutions on the recovery of hair follicles from VarGoViv virus infection in vitro? --

The ∆H of solution of NaOH is 46.8 kJ/mol.

First, we need to calculate the amount of heat absorbed by the solution:

q = m × c × ∆T

where q is the heat absorbed (in Joules), m is the mass of the solution (in grams), c is the specific heat capacity of the solution (in J/(g °C)), and ∆T is the change in temperature (in °C).

In this case, the mass of the solution is the sum of the mass of NaOH and the mass of water:

m = 7.59 g + 80.0 g = 87.59 g

The change in temperature is:

∆T = 48.0 °C - 25.0 °C = 23.0 °C

Substituting the values, we get:

q = 87.59 g × 4.184 J/(g °C) × 23.0 °C = 8,878 J

Next, we need to convert the heat absorbed into the enthalpy change of solution (∆H). The enthalpy change of solution is the heat absorbed per mole of solute. The number of moles of NaOH is:

n = m/M

where M is the molar mass of NaOH, which is 40.00 g/mol.

n = 7.59 g / 40.00 g/mol = 0.1898 mol

Therefore, the enthalpy change of solution is:

∆H = q/n = 8,878 J / 0.1898 mol = 46,780 J/mol = 46.78 kJ/mol

The H of a NaOH solution, rounded to three significant numbers, is 46.8 kJ/mol.

To know more about the Temperature, here

https://brainly.com/question/30411639

#SPJ1

Greater than 0 is the change in entropy (AS) when a solid substance decomposes and produces gaseous products. The correct option is B.

The change in entropy (ΔS) is a measure of the degree of randomness or disorder in a system. When a solid substance decomposes and produces gaseous products, the number of particles (molecules or atoms) in the system increases, and the arrangement of the particles becomes more disordered. This results in an increase in entropy, which is greater than 0.

When a solid substance decomposes and produces gaseous products, the change in entropy (ΔS) is greater than 0. This is because the number of particles in the system increases, leading to an increase in disorder or randomness.

The entropy of a system is a measure of the degree of disorder, and it tends to increase in processes that lead to a greater dispersion of energy or matter. In the case of the decomposition of a solid substance into gaseous products, the transition from a more ordered solid state to a more disordered gas state leads to an increase in entropy.

This phenomenon is a manifestation of the second law of thermodynamics, which states that the entropy of a closed system tends to increase over time.

For more question on entropy click on

https://brainly.com/question/30481619

#SPJ11

The final volume of the gas at a pressure of 2.36 atm is 1.188 L.

The first step is to convert the initial volume to liters and the initial pressure to atm:

V₁ = 3218 mL = 3.218 L

P₁ = 824 torr = 1.084 atm

Using the combined gas law equation: P₁V₁/T₁ = P₂V₂/T₂

We can solve for V₂, the final volume:

V₂ = (P₁V₁T₂) / (P₂T₁) = [(1.084 atm) x (3.218 L) x (286 K)] / [(2.36 atm) x (286 K)] = 1.188 L

As a result, the ultimate volume of the gas at 2.36 atm is 1.188 L.

To know more about the Pressure, here

https://brainly.com/question/15396706

#SPJ1

In order to calculate the number of grams of magnesium reacted, we must first calculate the moles of hydrogen gas produced. The ideal gas law can be used to calculate the moles of a gas, given the pressure, temperature, and volume of the gas.

The ideal gas law is PV=nRT, where P is pressure, V is volume, n is moles, R is the ideal gas constant, and T is temperature. By calculating the given values, we get 0.032L*1.1atm/24C*0.08206L*atm/mol*K=0.0077 mol.

Since 1 mole of hydrogen gas is produced for every mole of magnesium that reacts, 0.0077 moles of magnesium have reacted.

Finally, to calculate the grams of magnesium, we multiply the moles of magnesium by the molar mass of magnesium, which is 24.31 g/mol. This gives us 0.0077 mol*24.31 g/mol = 0.186 grams of magnesium.

Learn more about magnesium at :

https://brainly.com/question/1533548

#SPJ1

Answer:

To solve this problem, we can use the definition of percent concentration by mass:

percent concentration = (mass of solute ÷ mass of solution) x 100%

We know that the percent concentration of NaCl in the solution is 15% by mass, and we have a 500 gram sample of the solution. Let's assume that the mass of NaCl in the sample is x grams.

Using the percent concentration formula, we can write:

15% = (x ÷ 500) x 100%

Simplifying this equation, we get:

x = (15 ÷ 100) x 500 = 75 grams

Therefore, there are 75 grams of NaCl in a 500 gram sample of the solution.

The correct answer is c. 75 grams.

The mass (in grams) of magnesium sulfate, MgSO₄ that would be produced from the reaction is 87.76 g

The mass of magnesium sulfate, MgSO₄ produced can be obtain as illustrated below:

Al₂(SO₄)₃ + 3Mg -> 2Al + 3MgSO₄ ΔH = +722 KJ

From the balanced equation above,

When 722 KJ of heat were absorbed, 360 g of MgSO₄ were produced

Therefore,

When 176 KJ of heat is absorbed = (176 × 360) / 722 = 87.76 g of MgSO₄ will be produce

Thus, the mass of MgSO₄ produced is 87.76 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

Answer: A.) It is a compound

Explanation:

Water is an inorganic compound made of water molecules, which are made of oxygen and hydrogen atoms.

It is not an element because there is no such thing as a water atom.

Water is not a chemical reaction to anything.

Water is OBVIOUSLY not a metal.

Hope this helps :)

The structure of Arg-Ile-Tyr is given below:

Peptides make up short chains of amino acids, which act as the fundamental units for building proteins. Within these chains, peptides usually consist of no more than 50 amino acids in contrast to proteins that are made up of significantly longer structures.

Found throughout various sources such as plants, animals, and bacteria, peptides play crucial roles in multiple biological processes including signaling, enzyme activity, and immune response.

Additionally, artificially synthesized peptides serve several purposes within the medicine, cosmetics, and food industries. Scientists are also exploring certain peptide's potential therapeutic advantages mainly pertaining to anti-inflammatory, antimicrobial, and anticancer activities.

Read more about peptides here:

https://brainly.com/question/21884818

#SPJ1

The experiment that will most likely be part of a good demonstration of thermal equilibrium is: D. Bringing together two objects with different temperatures.

Thermal equilibrium is a condition in which the temperature levels of two fluids or substances attain the same temperature. Let us say that a cup of ice-cold water is brought from the freezer to a warm environment.

Thermal equilibrium will be attained when there will be a transfer between the temperature condition of the cup of water and the environment. So, option D is a good example.

Learn more about thermal equilibrium here:

https://brainly.com/question/14556352

#SPJ1

Most people will take prescription medicines to prevent, treat or to manage the illness. The effective use of medicines can help us to stay healthy for longer. The prescription number is often shown as ''Rx#''.

The prescription number is defined as the number you will call to place the refill. Although a pharmacist can look up your prescription in the computer, the refill process will go a lot faster if you have this number handy as it is the short code for your prescription.

Reading the label correctly can help the patients to take right amount of the medicine and that it won't negatively react with other medications.

To know more about prescription number, visit;

https://brainly.com/question/15214852

#SPJ1

The gas laws are Boyle's Law, Charles's Law, and Gay-Lussac's Law.

The physical properties of gases can be comprehended through the gas laws that describe their response when exposed to dissimilar circumstances such as temperature fluctuations or changes in pressure or volume.

Among these principles are Boyle's Law, Charles's Law, and Gay-Lussac's Law whose application allows for better comprehension of gas dynamics.

To illustrate Boyle's law’s formulation- when subjected to constant temperature changes- there exists inverse proportionality between pressure and volume in gaseous compounds with reducing volumes resulting from elevated compression. The relationship between gas temperature and its accompanying volume at fixed pressure is defined by Charles's Law. As an illustration, heating up a balloon causes an expansion in internal air that leads to an increase in its physical size.

Similarly, cooling down the same balloon yields contraction through reduced temperature leading to decreased internal air volumes. Gay-Lussac's observation reveals a similar pattern where at fixed volumes; increasing temperature translates into increased pressures. An increase in solar radiation on a balloon can lead to high temperatures that consequently elevate its internal pressure, eventually leading to it enlarging in size.

Boyle's Law finds practical implementation in several household appliances, including pressure cookers. The pressure cooker's mechanism involves trapping steam within a sealed pot, which consequently raises the temperature and pressure inside the container. This increase in temperature conforms to Boyle's law, that states an increase in pressure of gases results in enhanced temperatures as well. The heightened levels of pressure within the closed pot allow for quicker cooking times of food substances compared to standard pots.

Learn about Boyle's Law here https://brainly.com/question/1696010

#SPJ1

Answer:

cannot be measure

Hope this helps :) !!!

Answer:

Malic Acid is found in Apples.

Hydrochloric Acid is found in Our Stomach.

Potassium Hydroxide is found in Soaps and Bleaches.

Sodium Hydroxide is found in Household Cleaners.

Explanation:

IF MY ANSWER IS HELPFUL THEN PLEASE RATE IT, LIKE IT, FOLLOW ME AND GIVE ME A BRAINLIEST...PLEASE.

THANK YOU...!

Answer:

Its wrong the question is wrong you should delete it

The enthalpy change for the given reaction is 1344 kJ/mol.

First, we need to write the balanced chemical equation for the given reaction:

HCN(g) + 2 H2(g) → CH3NH2(g)

To calculate the enthalpy change (ΔH) for this reaction, we need to subtract the total energy of the reactants from the total energy of the products. We can do this by calculating the energy required to break the bonds in the reactants and the energy released when new bonds are formed in the products.

Reactants:

HCN(g): 1 C-N bond (305 kJ/mol) + 1 C-H bond (413 kJ/mol) + 1 N-H bond (391 kJ/mol) = 1109 kJ/mol

2 H2(g): 4 H-H bonds (4 x 432 kJ/mol) = 1728 kJ/mol

Total energy of reactants: 1109 kJ/mol + 1728 kJ/mol = 2837 kJ/mol

Products:

CH3NH2(g): 1 C-H bond (413 kJ/mol) + 3 C-N bonds (3 x 305 kJ/mol) + 7 H-H bonds (7 x 432 kJ/mol) = 4181 kJ/mol

Total energy of products: 4181 kJ/mol

ΔH = (total energy of products) - (total energy of reactants)

ΔH = 4181 kJ/mol - 2837 kJ/mol

ΔH = 1344 kJ/mol

For more question on enthalpy change click on

https://brainly.com/question/30598312

#SPJ11

The flashbulb contains approximately 0.00291 grams of O₂(g).

The ideal gas law relates the pressure (P), volume (V), temperature (T), and amount of gas (n) through the equation PV = nRT, where R is the universal gas constant. Rearranging this equation to solve for n gives n = PV/RT.

To find the amount of O₂(g) in the flashbulb, we first need to convert the volume to liters and the temperature to Kelvin:

V = 1.70 mL = 0.00170 L

T = 29.0 °C + 273.15 = 302.15 K

We can then use the ideal gas law to calculate the amount of O₂(g):

n = PV/RT

n = (2.30 atm)(0.00170 L)/(0.0821 L·atm/mol·K)(302.15 K)

n = 9.10 × 10⁻⁵ mol O₂

Finally, we can convert from moles to grams using the molar mass of O₂:

m = n × M

m = (9.10 × 10⁻⁵ mol)(32.00 g/mol)

m = 0.00291 g O₂

As a result, the flashbulb contains around 0.00291 grams of O₂(g).

To know more about the Pressure, here

https://brainly.com/question/14047938

#SPJ1

The negative sign indicates that heat is being released from the ethanol as it cools down. So, 3,950.4 joules of heat are released when 60g of ethanol cools from 70°C to 43°C.

To calculate heat released when 60g of ethanol cools from 70°C to 43°C, we can use the following equation:

Q = m × c × ΔT

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 43°C - 70°C

ΔT = -27°C

Note that the change in temperature is negative because the ethanol is cooling down.

Next, we can calculate the heat released:

Q = m × c × ΔT

Q = 60g × 2.44 J/g°C × (-27°C)

Q = -3,950.4 J

To know more about heat released, here

brainly.com/question/26550984

#SPJ1

The molarity of 150 mL solution containing 5g of copper (1) chlorate is 0.0051 M

We'll begin by obtaining the number of mole in 5 g of copper (i) chlorate. This is shown below:

Mole = mass / molar mass

Mole of copper (i) chlorate = 5 / 147

Mole of copper (i) chlorate = 0.034 mole

Now, we shall determine the molarity of the solution. Details below:

Molarity of solution = mole / volume

Molarity of solution = 0.034 / 0.15

Molarity of solution = 0.0051 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

Answer:

Explanation:

Which of the following is most likely to be ductile?

a. Metal
b. Nonmetal
c. Metalloid
d. Gas

Answer: a. MetalMetal

Answer:2

Explanation: Acids do indeed conduct electricity (Love the one peice pfp btw)

If a mixture of gases reaches equilibrium with 0.0113M of H² and CO², the equilibrium concentration of the product is 0.0113 M. Hence, option A is correct.

The equilibrium constant, Keq, is given as:

[tex]\rm K_{eq} = \dfrac{[CO][H_2O]}{ [H_2][CO_2]} \\ \\[/tex]

= 0.16

At equilibrium, let the concentrations of CO, H₂O, and H₂, CO₂  be [CO], [H₂O], [H₂], and [CO₂].

Initial concentration of H₂ and CO₂ = 0.0113

Change in concentration = +X and -X

At equilibrium, for CO = 0-X, H₂O = X,H₂O = 0.0113-X and CO₂=0.0113-X

x² = 0.001207

x = 0.0348 M

Therefore, the equilibrium concentrations of the products are:

[CO] = 0 - x = -0.0348 M

[H₂O] = x = 0.0348 M

[H₂] = 0.0113 - x = 0.0113 - 0.0348 = 0.0225 M

[CO₂] = 0.0113 - x = 0.0113 - 0.0348 = 0.0225 M

Since [CO] is negative, we can conclude that the equilibrium lies to the left, indicating that the reactants are favored over the products.

To learn more about an equilibrium constant, follow the link:

https://brainly.com/question/10038290

#SPJ1

Answer:

a. adjust to re-reach equilibrium

Explanation:

Le Chatelier's Principle can be logically understood based on the concept of equilibrium in chemical reactions. When a chemical reaction is in equilibrium, it means that the rate of the forward reaction (from reactants to products) is equal to the rate of the reverse reaction (from products to reactants), and the concentrations of reactants and products remain constant over time.

When an equilibrium reaction is subjected to a stress, such as a change in concentration, temperature, or pressure, it disrupts the original balance between reactants and products. In response to this stress, Le Chatelier's Principle predicts that the system will adjust its position of equilibrium to counteract the change and restore balance.

For example, if the concentration of one of the reactants is increased, the system will shift the equilibrium position to the side that consumes that reactant in order to reduce its concentration and restore the original balance. Similarly, if the temperature of the system is increased, the system will shift the equilibrium position in the endothermic or exothermic direction to counteract the change in temperature. If the pressure of the system is increased, the system will shift the equilibrium position to the side with fewer moles of gas in order to reduce the pressure.

In other words, Le Chatelier's Principle states that a system at equilibrium will adjust its position of equilibrium in response to external stresses in order to re-establish a new equilibrium and restore balance between reactants and products. This logical understanding helps to explain why option a, "adjust to re-reach equilibrium," is the correct answer.