Find the value of x. Round your answer to two decimal places. Enter deg after any degree value
[tex]\cos(40^o )=\cfrac{\stackrel{adjacent}{32}}{\underset{hypotenuse}{x}} \implies x=\cfrac{32}{\cos(40^o)}\implies x\approx 41.77[/tex]
Make sure your calculator is in Degree mode.
What’s 137% x 680? give your answer to 1 decimal place
if we will divide 137 with 100 and then multiply it with 680 you will gett your answer
the answer is 931.6
Answer:
931.6
Step-by-step explanation:
We need to change the percent to decimal form.
137% = 1.37
Multiply this by 680.
1.37 * 680
931.6
Calculate the interest of an investment of $3500 at 2.75% for 3 years.
Use the functions:
A = P (1+r/n)nt and A = Pe rt
Fill out the table below for given values.
A =
P =
r = (as decimal)
t =
Answer: We can use both formulas to calculate the interest on an investment of $3500 at 2.75% for 3 years.
Using the formula A = P(1+r/n)^(nt), where A is the final amount, P is the principal amount, r is the annual interest rate as a decimal, n is the number of times interest is compounded per year, and t is the time in years, we have:
A = 3500(1+0.0275/1)^(1*3) ≈ $3843.84
Therefore, the interest earned is:
Interest = A - P = $3843.84 - $3500 = $343.84
Using the formula A = Pe^(rt), where A is the final amount, P is the principal amount, r is the annual interest rate as a decimal, t is the time in years, and e is the mathematical constant approximately equal to 2.71828, we have:
A = 3500e^(0.0275*3) ≈ $3843.84
Therefore, the interest earned is:
Interest = A - P = $3843.84 - $3500 = $343.84
The interest earned is $343.84 in both cases.
what's 1=7 x 67.8=75+90
The solutions of the given equations are x = 0 and x = -36.
We have,
To solve these equations:
9x - 7 = -7
We can add 7 to both sides to isolate the variable:
9x - 7 + 7 = -7 + 7
Simplifying the left-hand side and the right-hand side, we get:
9x = 0
Finally, dividing both sides by 9, we get:
x = 0
Next, to solve:
-1 = 5 + x/6
We can begin by subtracting 5 from both sides:
-1 - 5 = 5 + x/6 - 5
Simplifying the left-hand side and the right-hand side, we get:
-6 = x/6
Finally, multiplying both sides by 6, we get:
-36 = x
Thus,
The solutions of the given equations are x = 0 and x = -36.
Learn more about equations here:
https://brainly.com/question/17194269
#SPJ1
The complete question.
9x - 7 = -7
-1 = 5 + x/6
How is graphing (5, 0) different from graphing (0, 5)? Explain.
Answer: If the number is placed on the X as in (X,Y) the X value will rise but the Y value will stay the same, but if the number is played on the Y, the Y value will go up, and the X value will stay the same
If m<6= 97°, what is m<5
The measure of value of ∠5 is 83°.
Now, It is given that;
Two Lines m and n are parallel with each other and l is the transversal crossing the two given parallel lines.
And, m∠6 = 97°,
Since, Two rays combined into an angle have a single terminal. The point is known as the vertex of the angle, while the rays are known as its sides, occasionally as its legs, and occasionally as its arms.
Hence, Then by using the property of liner pair angles, we have
⇒ m∠5 + m∠6=180°
(Because they form a linear pair angles.)
⇒ m∠5 + 97 = 180
Subtract 97 both side, we get;
⇒ m∠5 + 97 - 97 = 180 - 97
⇒m∠5 = 180 - 97
⇒m∠5 = 83°.
Therefore, the value of the measure of ∠5 is,
⇒ ∠5 = 83°.
Learn more about the angle visit:;
https://brainly.com/question/25716982
#SPJ1
Volume of an open rectangular is 24.3m³.height is 2.7m. what is surface area.
If the volume of an open rectangular object or space is 24.3m³ with a height of 2.7m, the surface area is 9m.
How is the surface area determined?The surface area can be determined by dividing the volume by the height.
This is because the product of the surface area and the height gives the volume.
The surface area is a product of the length and width, while the volume is the product of the length, width, and height.
Volume = 24.3m³
Height = 2.7m
Surface area = 9m (24.3m³ ÷ 2.7)
Learn more about the volume and surface area at https://brainly.com/question/28027357.
#SPJ1
Find all possible values of x.
Using the secant-secant theorem, the possible values of x are x = 6 and x = -10. -10 cannot be a value of x because length cannot be negative.
Secant-secant theorem: Calculating the value of of xFrom the question, we are to determine the value of x in the given diagram.
The Secant-secant theorem states that
"Given two secant segments which share an endpoint outside of the circle, the product of one secant segment and its external segment is equal to the product of the other segment and its external segment"
Thus,
We can write that
5 × (5 + 7) = x × (x + 4)
Simplifying
5 × 12 = x² + 4x
60 = x² + 4x
x² + 4x - 60 = 0
Solve the quadratic equation
x² + 4x - 60 = 0
x² + 10x - 6x - 60 = 0
x(x + 10) - 6(x + 10) = 0
(x - 6)(x + 10) = 0
x - 6 = 0 or x + 10 = 0
x = 6 or x = -10
Since x cannot be negative,
x = 6
Hence, the value of x is 6
Learn more on Secant-secant theorem here: https://brainly.com/question/29797454
#SPJ1
The height of a tree in feet over x years is modeled by the function f(x). Determine if each statement is True or False.
The statement is examined using the equation to find that
1. False
2. False
3. True
4. False
How to find the statement is trueThe given equation is
f(x) = 32 / ( 1 + e⁰°⁵ˣ)
Evaluating the first statement by substituting
For x = 3, f(3 ) gives 5.84
For x = 6, f( 6) gives 1.52
5.82 - 1.52 is not equal to 9 ft hence the statement is False
Evaluating the second statement by substituting
when x = 0, the function gives 16 which is against 2 ft hence False
Evaluating the third statement by substituting
For x = 1, f(1) = 12.08 this is less than 16 ft hence a decline hence this is True
fourth statement
The trees maximum height, captured should be 16 ft not 35 ft hence False
Learn more about exponent equations at
brainly.com/question/2456547
#SPJ1
During the first week of the "Cash for Clunkers" program, the average increase in gas mileage for the new car purchased versus the car traded in was 61%. If the average gas mileage of the new cars was 25.4 miles per gallon, what was the average gas mileage of the cars traded in? Round the answer to the nearest tenth.
The average gas mileage of the cars traded is 15.8 miles per gallon round to the nearest.
Let's assume that the average gas mileage of the cars traded in is x miles per gallon. According to the problem, the average increase in gas mileage for the new car purchased versus the car traded in was 61%. This means that the new car gets 61% more miles per gallon than the car traded in. We can express this relationship mathematically as:
25.4 = x + 0.61x
Simplifying the right-hand side of the equation, we get:
25.4 = 1.61x15.78
Dividing both sides by 1.61, we get:
x = 15.78
Therefore, the average gas mileage of the cars traded in was approximately 15.8 miles per gallon, rounded to the nearest tenth.
To understand this result, we can interpret it as follows: for the first week of the "Cash for Clunkers" program, the average gas mileage of the new cars purchased was 25.4 miles per gallon, which is 61% higher than the average gas mileage of the cars traded in. This suggests that the program was successful in incentivizing people to trade in their old, less fuel-efficient cars for new, more fuel-efficient cars.
Know more about average here:
https://brainly.com/question/130657
#SPJ11
The cup on Sophie's desk holds 4 red pens and 7 black pens. What is the probability of her selecting first a black pen, and then a red one?
Answer:14/165
Step-by-step explanation:
its a fraction i did the same qestion and got it right
3. Which of the following is equivalent to 5/x= 3/x-12
Answer: 5(x - 12) = 3x
Step-by-step explanation:
We can cross-multiply to answer this question.
[tex]\frac{5}{x} =\frac{3}{x-12}[/tex]
5 * (x - 12) = 3 * x
5(x - 12) = 3x
Answer:
b) 5(x - 12) = 3x
Step-by-step explanation:
Given expression,
→ 5/x = 3/(x - 12)
Now we have to,
→ Find the equivalent expression.
Let's find the required answer,
→ 5/x = 3/(x - 12)
Cross multiplying both sides:
→ 5(x - 12) = 3(x)
→ 5(x - 12) = 3x
Applying Distributive property:
→ 5(x) - 5(12) = 3x
→ 5x - 60 = 3x
Solving for the value of x:
→ 5x - 3x = 60
→ 2x = 60
→ x = 60/2
→ [ x = 30 ]
Hence, the value of x is 30.
help me- Name the triangle with the following characteristics. sides: 5 cm, 6 cm, 7 cm; Angles: 75° and 60°.
A) acute scalene triangle
B) acute isosceles triangle
C) obtuse scalene triangle
D) right isosceles triangle
Answer
I think it's acute scalene triangle
Step-by-step explanation:
All the angles are less than 90 degrees, which is acute.
whats the longest word ever?
Answer:
Step-by-step explanation:
Pneumonoultramicroscopicsilicovolcanoconiosis
Answer: Supercalafragilisticexpialadocious
Step-by-step explanation:
In 2017 32.2% of college students were minorities. If you took a random group of 500 college students in 2017, then how many of these 500 college students would you expect to be minorities?
PLEASE HELP ME QUICKLY.
Find the average rate of change between the two labeled points.
[The point in between is (3, 72.6).]
Answer: 2/13.86
Step-by-step explanation:
A lines rate of change is equal to it's slope
Slope is rise over run (Y/X)
The point is up 2 on the Y axis and over 13.86 on the X axis
The slope is= 2/13.86
What is the area of the patio rounded to the nearest tenth? Use 3.14 for pi
Answer:b
Step-by-step explanation:b
variable:
Hours (h)
10
20
30
40
Cost in dollars (c)
80
110
140
170
The table shows the relationship between hours spent dog sitting and the cost of the services. Write an equation to represent the situation using h and c as your variables.
The solution is it's hard to say which company would be cheaper to hire based on the information provided, but it's recommended to check the warranty, prices of parts, and reputation of both companies, and to get a second opinion or quote from both companies before making a decision.
Here,
we can see that the function C(x) = 25x + 75 represents the labor cost (in dollars) for Bob's Auto Repair to replace your alternator, where x is the number of hours. We can use this function to find the cost of replacing an alternator that is estimated to take 5 hours of labor.
C(5) = 25(5) + 75 = 125 + 75 = 200
We also have the labor cost for the main competitor, Budget Auto Repair, in a table format.
Hours Cost
1 $90
2 $130
3 $170
We can see that the cost of labor increases as the number of hours increases. From the information provided it's hard to say which company would be cheaper to hire, however the company with the function C(x) = 25x + 75 would be cheaper if the alternator takes more than 4 hours of labor, otherwise Budget Auto Repair would be cheaper.
It's important to check the warranty, prices of parts, and reputation of both companies. If a company has a good reputation and a good warranty, it may be worth paying a little more for labor.
It's also a good idea to get a second opinion or ask for a quote from both companies before making a decision.
In conclusion, it's hard to say which company would be cheaper to hire based on the information provided, but it's recommended to check the warranty, prices of parts, and reputation of both companies, and to get a second opinion or quote from both companies before making a decision.
To learn more about Function, Visit
brainly.com/question/11624077
#SPJ1
complete question:
19) The function C(x) = 25x+75 represents the labor cost (in dollars) for Bob's Auto Repair to replace
your alternator, where x is the number of hours. The table below shows sample labor costs from its main
competitor, Budget Auto Repair. The alternator is estimated to take 5 hours of labor. Which company
would you hire? Explain.
Hours 1,2,3
Cost
$90 $130 $170
2 defective screws out of 100 packs them in boxes of 500 probability of 15 defective screws
The term (100 C 15) represents the number of ways to choose 15 defective screws out of 100 packs.
In a scenario where there are 2 defective screws out of 100 packs, each containing 500 screws, we can calculate the probability of obtaining 15 defective screws. Let's assume that each pack is independent of the others.
The probability of a single screw being defective is 2/500, as there are 2 defective screws out of 500 in each pack.
Conversely, the probability of a screw being non-defective is 498/500.
To find the probability of obtaining exactly 15 defective screws, we can use the binomial distribution formula. The probability (P) can be calculated as follows:
P = (100 C 15) * (2/500)^15 * (498/500)^85
The term (100 C 15) represents the number of ways to choose 15 defective screws out of 100 packs.
By plugging these values into the formula and performing the calculations, the probability of obtaining exactly 15 defective screws can be determined. However, I am unable to perform the calculation for you within the given word limit.
For more such questions on probability
https://brainly.com/question/25870256
#SPJ8
Quatre ouvriers mettent 12 jours pour réaliser un travail. Dans les mêmes conditions combien de temps mettraient six ouvriers pour réaliser ce travail ?
Plants are sold in three different sizes of tray.
A small tray of 10 plants costs £2.50
A medium tray of 40 plants costs £8.40
A large tray of 90 plants costs £12.60
Which size tray of plants is the best value for money?
The size tray of plants which is the best value for money is large tray.
Which size tray of plants is the best value for money?A small tray of 10 plants costs £2.50
Cost per unit = Total cost / number of plants
= £2.50 / 10 plants
= £0.25 per plant
A medium tray of 40 plants costs £8.40
Cost per unit = Total cost / number of plants
= £8.40 / 40 plants
= £0.21 per plant
A large tray of 90 plants costs £12.60
Cost per unit = Total cost / number of plants
= £12.60 / 90 plants
= £0.14 per plant
Hence, the large tray of 90 plants costs £12.60 is the best buy for your money.
Read more on best buy:
https://brainly.com/question/11867723
#SPJ1
What is the volume of the object?
Two rectangular prisms are side by side. The dimensions of the larger rectangular prism are 8 c-m, 6 c-m, and 13 c-m and the dimensions of the smaller rectangular prism are 3 c-m, 4 c-m, and 7 c-m.
A
41cm3
B
526cm3
C
708cm3
D
52,416cm3
The total volume is the one in option C, 708 cubic centimeters.
What is the volume of the object?We know that this prism can be divided into two prisms, and remember that the volume of a prism is equal to the product between its dimensions.
Then the volume of the first prism is:
V = 8cm*6cm*13cm = 624 cm³
And the volume of the second prism is:
v' = 3cm*4cm*7cm = 84 cm³
Adding that we will get:
total volume = 624 cm³+ 84 cm³ = 708 cm³
LEarn more about volume at:
https://brainly.com/question/1972490
#SPJ1
Find the derivative of f(x)=(3x^2-4x+1)^4
Step-by-step explanation:
[tex]f'(x)=[(3x^2-4x+1)^4]'=4(3x^2-4x+1)^3*(3x^2-4x+1)'=4(3x^2-4x+1)^3*(6x-4)=8(3x^2-4x+1)^3(3x-2);[/tex]
The required derivative of f(x) = (3x² - 4x + 1)⁴ is f'(x) = 4(3x² - 4x + 1)³ * (6x - 4)
We can use the chain rule and power rule of differentiation to find the derivative of f(x).
Let u = 3x² - 4x + 1, then we have:
f(x) = u⁴
Using the chain rule, we get:
f'(x) = 4u³ * u'
To find u', we can differentiate u with respect to x using the power rule:
u' = d/dx (3x² - 4x + 1) = 6x - 4
Substituting u' and u into f'(x), we get:
f'(x) = 4(3x² - 4x + 1)³ * (6x - 4)
Therefore, the derivative of f(x) = (3x² - 4x + 1)⁴ is f'(x) = 4(3x² - 4x + 1)³ * (6x - 4)
Learn more about derivatives here:
https://brainly.com/question/30365299
#SPJ1
Use the table that shows the recent population, in millions, of the ten largest U.S. cities.
Find the mean absolute deviation. Round to the nearest hundredth.
The mean absolute deviation =________million.
The mean absolute deviation for the data-set in the table is given as follows:
1.52 million.
What is the mean absolute deviation of a data-set?The mean of a data-set is given by the sum of all observations divided by the cardinality of the data-set, which is the number of observations in the data-set.The mean absolute deviation of a data-set is the sum of the absolute value of the difference between each observation and the mean, divided by the number of observations.The mean absolute deviation represents the average by which the values differ from the mean.The mean for the data-set in this problem is given as follows:
(1.5 + 3.8 + 1.3 + 1.6 + 2.9 + 1.4 + 0.9 + 2.3 + 8.4 + 1.3)/10 = 2.54.
The deviations are given as follows:
|1.5 - 2.54| = 1.04.|3.8 - 2.54| = 1.26.|1.3 - 2.54| = 1.24.|1.6 - 2.54| = 1.06.|2.9 - 2.54| = 0.46.|1.4 - 2.54| = 1.14.|0.9 - 2.54| = 1.64.|2.3 - 2.54| = 0.24.|8.4 - 2.54| = 5.86.|1.3 - 2.54| = 1.24.Hence the mean absolute deviation is given as follows:
(1.04 + 1.26 + 1.24 + 1.06 + 0.46 + 1.14 + 1.64 + 0.24 + 5.86 + 1.24)/10 = 1.52 million.
More can be learned about mean absolute deviation at https://brainly.com/question/447169
#SPJ1
I REALLY NEED HELP I DONT UNDERSTAND IT!
The area of the pentagon using the composite area formula is 37 in².
What is a pentagon?
A pentagon is one of the many types of polygon having five sides and five angles.
To calculate the area of the pentagon, we use the formula below
Formula:
A = BH/2+LW+bL................... Equation 1From the diagram,
Given:
B = 6 inH = 4 inL = 5 inW = 4 inb = 1 inSubstitute these values into equation 1
A = (4×6/2)+(5×4)+(1×5)A = 12+20+5A = 37 in²Learn more about pentagon here: https://brainly.com/question/29673128
#SPJ1
Identify any bias in the following survey question.
Do you think the school newspaper should more frequently cover the hockey team and the academic decathlon team?
Choose the correct answer below.
A. There is a bias because the question uses words that cause strong reactions.
B. There is a bias because the question suggests a particular answer.
C. There is a bias because the question combines two or more issues.
D. There is no bias in the survey question.
There is a bias because the question suggests a particular answer. Option B
What is bias?A systematic inaccuracy or departure from the true value that causes inaccurate conclusions to be drawn about a population or topic under study is referred to as bias in research. Any step of the research process, including study design, data collecting, analysis, and interpretation, is susceptible to bias.
It may be caused by a number of variables, including the sample strategy, participant selection, measuring methods, the researcher's own ideas and preconceptions, or the influence of outside variables like funding sources or political motivations.
Learn more about bias:https://brainly.com/question/15135672
#SPJ1
hat is the domain of the function on the graph?
Answer:
The domain of a function is the set of all possible input values for the function. In this case, the function is a graph, so the domain is the set of all possible x-values that correspond to points on the graph.
To find the domain, we need to consider all of the points on the graph. We can see that the graph extends infinitely to the left and right, so all real numbers are possible input values. Therefore, the domain of the function is all real numbers, or R.
Here is a more formal definition of the domain of a function:
The domain of a function is the set of all real numbers x for which the function f(x) is defined.
In other words, the domain is the set of all input values for which the function produces a valid output value.
Step-by-step explanation:
In 60
60
seconds, Darrell walks 90
90
meters.
Select the two answers that describe the unit rate at which he walks.
CLEAR CHECK
1.5
1
.
5
seconds per meter
1.5
1
.
5
meters per second
90
90
meters per second
112
1
1
2
meters every second
30
30
meters every second
30
30
seconds per meter
The two answers that describe the unit rate at which Darrell walks are 1.5 seconds per meter and 1.5 meters per second
To find the unit rate at which Darrell walks, we need to determine how many meters he walks per second. We are given that he walks 90 meters in 60 seconds.
Step 1: Divide the total distance by the total time to find the unit rate.
Unit rate = (total distance) / (total time)
Step 2: Plug in the given values and calculate.
Unit rate = 90 meters / 60 seconds
Step 3: Simplify the fraction.
Unit rate = 1.5 meters per second
The two answers that describe the unit rate at which Darrell walks are:
1. 1.5 meters per second
2. 30 seconds per meter (the reciprocal of the unit rate)
For more such questions on meter , Visit:
https://brainly.com/question/19634537
#SPJ11
Use the following information to answer questions 9 and 10.
Suppose we drop a ball from a height of 10 feet. After each bounce, it returns to a height that is k% of the height from which it last fell. After the 5th bounce, it returns to a height of 9.04 feet. We will ignore things like friction and air resistance so that the terms form a geometric sequence.
9 . Determine k.
97.51%
98.00%
98.83%
99.15%
10. How many bounces does it take until the ball bounces back to a height less than 3 inches (1/4 of a foot)?
163
183
203
223
9. The ball returns to 98.00% of its previous height after each bounce Option B
10. It will take 183 bounce until the ball bounces back to a height less than 3 inches. Option B
How do we solve for k% of previous height?To solve for k% of previous height after each bounce, we say
10×(k/100)⁵ = 9.04
k = [tex](9.04/10)^{1/5}[/tex]×100
k = 98.00
To find out how many bounces it takes for the ball to bounce back to a height less than 3 inches (or 0.25 feet), we use the inequality
10 × (0.961)ⁿ < 0.25
The logarithm of both sides gives
n × log(0.961) < log(0.025)
n > log(0.025) / log(0.961)
n > 182.593
Find more exercises on previous height after bounce
https://brainly.com/question/3421608
#SPJ1
URGENT
Georgia will use the pattern shown to make a square pyramid out of cardboard. The square pyramid will not have a bottom.
A net of a square pyramid. The square base has side lengths of 9 inches. The triangular sides have heights of 14 inches.
How much cardboard will she need if a = 14 in. and b = 9 in.?
Group of answer choices
378 square inches
630 square inches
504 square inches
252 square inches
Georgia will need [tex]\(\boxed{333}\)[/tex] square inches of cardboard to construct the square pyramid.
To calculate the amount of cardboard needed to construct the square pyramid, we need to find the surface area of each individual face and then add them together.
Given that the base of the pyramid is a square with side length [tex]\(b = 9\) inches[/tex] and the height of the triangular sides is [tex]\(a = 14\) inches[/tex], we can proceed as follows:
The surface area of the square base is [tex]\(b^2 = 9^2 = 81\)[/tex] square inches.
Each triangular face has a base equal to the side length of the square base, [tex]\(b = 9\) inches[/tex], and a height of [tex]\(a = 14\) inches[/tex]. Therefore, the surface area of each triangular face is [tex]\(\frac{1}{2} \times b \times a = \frac{1}{2} \times 9 \times 14 = 63\)[/tex] square inches.
Since there are four triangular faces in a square pyramid, the total surface area of the triangular faces is [tex]\(4 \times 63 = 252\)[/tex] square inches.
Adding the surface area of the square base and the total surface area of the triangular faces, we get [tex]\(81 + 252 = 333\)[/tex] square inches.
Therefore, Georgia will need [tex]\(\boxed{333}\)[/tex] square inches of cardboard to construct the square pyramid.
For more such questions on square pyramid: https://brainly.com/question/3688277
#SPJ11