Which shows an isomer of the molecule below?
Answer: C
Explanation:
A) There is 1 fewer hydrogen atom.
B) There are 2 fewer carbon atoms.
D) There is 1 extra hydrogen atom.
What is the change in freezing
point, ATf, when the 0.195 m
aqueous solution of K2S dissolves
into 3 particles?
-1.09'C is the change in freezing point
“Freezing point depression” depends on the solvent and the molar concentration of the solute.
Sulfide is highly basic, consequently
K2S
completely and irreversibly hydrolyzes in water according to the following equation:
K2S+H2O→KOH+KSH
What is freezing?Freezing, also known as solidification, is a phase transition where a liquid turns into a solid when its temperature is lowered below its freezing point.
the temperature at which a liquid solidifies specifically : the temperature at which the liquid and solid states of the substance are in equilibrium at atmospheric pressure : melting point the freezing point of water is 0° Celsius or 32° Fahrenheit.
Learn more about change in freezing point here:https://brainly.com/question/23035406
#SPJ10
Answer:1.0881
Explanation:
A scuba diver uses compressed air to breath under water. He starts with an air volume of 3.20 L at sea level (1 atm) at a temperature of 30°C. What is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C?
2.56 L is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C.
What is an ideal gas equation?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Given data:
[tex]P_1=1 atm[/tex]
[tex]V_1=3.20 L[/tex]
[tex]T_1[/tex]=30°C
[tex]P_2=3 atm[/tex]
[tex]V_2=?[/tex]
[tex]T_2=24°C[/tex]
Using the equation:
[tex]\frac{P_1V_1}{T_1}[/tex] =[tex]\frac{P_2V_2}{T_2}[/tex]
[tex]V_2[/tex] =(1 atm x 3.20 L x 24°C) ÷ 30°C
[tex]V_2[/tex] = 2.56 L
Hence, 2.56 L is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C.
Learn more about the ideal gas here:
https://brainly.com/question/27691721
#SPJ1
Which element is most likely to have a high thermal conductivity
Copper has the highest thermal conductivity as compared to other metals in the periodic table.
What is thermal conductivity?Thermal conductivity refers to the rate at which heat is transferred by conduction through a unit cross-section area of a material. When a temperature increases at one end it moves to the other end through conduction.
So we can conclude that Copper has the highest thermal conductivity as compared to other metals in the periodic table.
Learn more about thermal here: https://brainly.com/question/19666326
#SPJ1
calculate the amount of glucose required to prepare 250g of 5% sugar solution
Answer:
12.5g
Explanation:
1. Percentage of solution = 5.
2. Mass of solution = 250g.
3. = Mass of solute / 250 x 100.
4. = 5 x 250 / 100.
5. = 12.5g.
The density of water is 1 g/cm3. brent used the following method to convert 1 g/cm3 to kg/m3.
(1 kg = 1,000 g and 1 m = 100 cm)
what is the error in brent's conversion method?
a - 1 kg should be written as 1 g.
b - (1 m)3 should be written as (1 cm)3.
c - 1,000 kg should be written as 1,000 g.
d - (100 cm)3 should be written as (100 m)3.
Answer:
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Explanation: hope this help.
Answer:
c - 1,000 kg should be written as 1,000 g.
Explanation:
got it correct on the test.
What is periodicity?
the quality of being periodic the tangency to record the intervals
the prediotic of the sun sports cycle
1. How does the Key change for a weak acid?
2. How would the images change for a weak acid solution of the same concentration? Draw the images and/or
describe with words.
3. Draw the images and/or describe with words a weak acid and a strong acid solution of the greater
concentration? Make any notes that might help you remember.
4. Write the chemical reactions for a weak acid and a strong acid.
5. Is there one type of representation that might be the best one for you to remember information about weak
and strong acids?
6. Make any notes that might help you remember how to compare/contrast the two types.
The weak acid will have fewer ions than the strong acid of similar concentration.
The chemical reactions for a weak acid and a strong acid is given below:
Strong acid: HA → H⁺ + A⁻Weak acid: HA ⇆ H⁺ + A⁻What are strong and weak acids?Strong acids are acids which dissociate completely in solutions. Examples of strong acids are hydrochloric acid and sulfuric acid.
Weak acids are acids which dissociate only partially in solutions. Examples of weak acids are carbonic acid and acetic acid.
Weak acids of a similar concentration to a strong acid have fewer hydrogen ions.
The equation of the dissociation of strong acids and weak acids are given below:
Strong acid: HA → H⁺ + A⁻Weak acid: HA ⇆ H⁺ + A⁻In conclusion, weak acids produce few ions in solution while strong acids fully dissociate into ions in solution.
Learn more about strong and weak acids at: https://brainly.com/question/15192126
#SPJ1
How many moles of oxygen are in 4.4 moles of Al(NO3)3 ?
Answer: 40. mol (to 2 sf)
Explanation:
Since there are 9 oxygen atoms in every molecule of aluminum nitrate, this means that there are 9 moles of oxygen atoms in each mole of aluminum nitrate.
So, in 4.4 moles, there are 9(4.4) = 40. mol (to 2 sf)
Based on the electron configuration of the two
atoms, predict the ratio of metal cationic (+) atom
to nonmetal anionic (-) atom in the compound.
Magnesium 1s²2s²2p63s²
Sulfur 1s²2s²2p63s²3p4
A compound formed between Magnesium and Sulfur is MgS.
What is a cation?Cations are positively-charged ions (atoms or groups of atoms that have more protons than electrons due to having lost one or more electrons).
Magnesium, Mg, is located in period 3, group 2 of the periodic table, and has two electrons on its outermost shell.
On the other hand, sulfur, S, is located in period 3, group 16 of the periodic table, and has six electrons on its outermost shell.
Chemical reactivity is governed by an atom's "desire" to have a stable electron configuration and to have eight electrons in its outermost shell to complete an octet.
In this case, magnesium can complete its octet by giving up those two valence electrons, becoming the magnesium cation.
[tex]Mg^{2+}[/tex], in the process.
Sulfur, which only needs two electrons to complete its octet, will pick up the two electrons coming from magnesium, becoming the sulfide anion,
[tex]S^{2−}[/tex], in the process.
The electrostatic force of attraction will then bring the magnesium cations and the sulfur anions together to form an ionic bond.
Learn more about cation here:
https://brainly.com/question/1333307
#SPJ1
calculate the number of moles in positive and negative ions in 1.75 moles of calcium fluoride quizlet
CaF₂ ⇒ Ca²⁺ + 2F⁻
1.75 1.75 3.5
what is the molecular formula of Ferric Oxide with criss-cross method
Answer: Fe2O3
Explanation: By applying crisscross method, the formula will be Fe2O3.
Hydrogen reacts with an element to form a compound. which element would have the most valence electrons available to react with hydrogen?
Answer:
the element is oxygen
Explanation:
it will react to give H2O
Describe the characteristics that identify a sample of matter as being a substance.
Answer:
Any characteristic that can be measured, such as an object's density, color, mass, volume, length, malleability, melting point, hardness, odor, temperature, and more, are considered properties of matter.
1. 10.0 g of CaCO 3 on heating gave 4.4 g of CO 2 and 5.6 g of CaO. The observation is in agreement with the law of conservation of mass.
2. hydrogen and oxygen are combined to form two compounds the hydrogen content in one of the compound is 5.93 % and another is 11.2 % is this obey the law of multiple proportion.
3. On analysis it was found that the black oxide of Copper and red oxide of copper contains 80 and 89% of copper respectively Is this obeys the law of multiple proportion.
4.when 8.4 G of NaHco3 is added to the solution of Acetic Acid weighing 20 gram if it is observed that 4.4 gram of Co2 is released into the atmosphere and Residue is left Behind what is the mass of left Residue.
Answer:
According to the law <br> Mass of reactants = mass of product, here <br> `underset(10 g)(CaCO_(3))rarr underset(4.4 g)(CO_(2))+underset(x)(CaO)` <br> Hence, x = 10 g - 4.4 g = 5.6 g <br> Which is mass of CaO.dIn the first compound <br> Hydrogen = 5.93 % <br> Oxygen = `(100-5.93)% = 94.07 %` <br> In the second compound <br> Hydrogen = 11.2 % <br> Oxygen `= (100-11.2)%=88.8%` <br> In the first compound the number of parts by mass of oxygen that combine with one part by mass of hydrogen `=(94.07)/(5.93)=15.86` parts ...(The ratio of Cu combining with fixed weight of oxygen in black and red oxide is 1 : 2 respectively. Step by step solution by experts to help you in doubt clearance & scoring excellent marks in exams.) {Check something more in the above attachment!}Refer to the above attachmentExplanation:
Mark this answer as brainlest answer!!
what is the wavelength of a microwave with a frequency of 2450 mhz
Answer:
See below
Explanation:
The way to calculate this
speed of light = wavelength * frequency
3 x 10 ^8 m/s = wavelength * 2450000000 Hz
wavelength = .12245 meters
= 1.2245 x 10^-1 Meters
The wavelength of a microwave with a frequency of 2450 mhz is 1.2245 x 10⁻¹ meters.
What is wavelength?The wavelength is the time period or spatial period between the periodic wave and the distance between two waves. A microwave is a form of electromagnetic radiation.
The frequency of a microwave, f = 2450 MHz
We need to find the wavelength and the period of the microwaves
c = f λ
c = speed of light = 3 x 10 m/sec. 8 c = λf where λ = wavelength, f = frequency. Length
The relation between the wavelength and frequency is given by
The speed of light = wavelength x frequency
3 x 10⁸ m/s = wavelength x 24500 Hz
Wavelength = .12245 meters
1.2245 x 10⁻¹ Meters
Therefore, the wavelength of a microwave with a frequency of 2450 MHz is 1.2245 x 10⁻¹ meters.
To learn more about wavelength, refer to the link:
https://brainly.com/question/13091031
#SPJ5
A student spilled a bottle of ammonia in one corner of the laboratory. Soon the whole laboratory was felled with pungent irritating small. The students immediately opened the windows and doors and switched on the exhaust fans. After sometime, students got relief. Explain what did actually happen?
Answer: Initially when the student spilled the bottle of ammonia the ammonia gas particles diffused with the particles of air in the room. We know that the rate of diffusion of gases is very high. So the entire room filled up with the pungent smell of ammonia.
When he opened the doors and windows and switched on the exhaust fan, the air from the room along with the ammonia gas diffused with the air outside the room.Moreover, outside air entered into the room so the concentration of ammonia gas in the room air reduced.Due to these reasons the student got relief.
When Earth receives energy from the Sun, ____. a. some energy is reflected back into space b. some is absorbed by the atmosphere c. some is absorbed by land and water on Earth's surface d. all of the above Please select the best answer from the choices provided A B C D
Answer:
D - all of the above
Explanation:
10.00 g of LiCl is dissolved in water to make 1.00 L of "Solution A". Then, 100 mL
of solution A were diluted to a volume of 500 mL of "Solution B". What is the
molarity of solution B? (Report your answer to four places past the decimal point.
Moodle is looking for a number only, no units.)
0.47 M is the molarity of solution B if 10.00 g of LiCl is dissolved in water to make 1.00 L of "Solution A".
Define the molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
[tex]Molality = \frac{Moles \;solute}{Solvent \;in \;kg}[/tex]
Moles of LiCl
[tex]Moles = \frac{mass}{molar \;mass}[/tex]
[tex]Moles = \frac{10.00 g}{42.394 g/mol}[/tex]
Moles = 0.2358824362
[tex]Molality = \frac{0.2358824362}{0.5 L}[/tex]
Molarity = 0.4717648724 M =0.47 M
Hence, 0.47 M is the molarity of solution B.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
How many milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda? Show your work.
225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
How to calculate volume?The volume of a substance can be calculated using the following formula:
molarity = no of moles ÷ volume
no of moles of baking soda (NaHCO3) = mass ÷ molar mass
Molar mass of baking soda = 84.007g/mol
no of moles = 15g ÷ 84.007g/mol = 0.18mol
0.8 = 0.18/volume
volume = 0.23L equivalent to 225mL
Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Learn more about volume at: https://brainly.com/question/1578538
#SPJ1
225 millilitres of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Define molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
[tex]Molality = \frac{Moles \;solute}{Volume of solution in litre}[/tex]
[tex]Moles of baking soda (NaHCO_3) =\frac{mass}{molar \;mass}[/tex]
Molar mass of baking soda = 84.007g/mol
[tex]Moles of baking soda (NaHCO_3) =\frac{15g}{84.007g/mol}[/tex]
[tex]Moles of baking soda (NaHCO_3) = 0.18mol[/tex]
Now, calculating volume with the molarity formula:
Molality = [tex]\frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]
0.8 = [tex]\frac{0.18 }{Volume \;of \;solution \;in \;litre}[/tex]
Volume = 0.23L equivalent to 225mL
Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Learn more about volume at:
brainly.com/question/1578538
#SPJ1
Which of the following could have been formed by reacting iron with sulfur?
A. Iron oxide
B. Sulfuric iron
C. Iron sulfide
D. Sulfuric acid
Answer: C
Explanation:
iron sulfide.
Answer:
C. Iron sulfide
Explanation:
Stay safe, stay healthy and blessed
Have a good day
Thank you
Only certified electricians are allowed to work on facility electrical system?
What volume did a helium-filled balloon have at 18.1 °C and 2.61 atm if its new volume was 59.9 mL at 1.92 atm and 12.5°C?
a. 44.9
b. 63.8
c.43.2
d. 83.0
Answer:
a. V=44.9mL
Explanation:
For a gas undergoing all of these changes, it will be important to combine Boyle's Law and Charles' Law to form the following equation (if it isn't already known):
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]
Where the Temperatures must be measured in Kelvin.
Recall that to convert Celsius to Kelvin, one must add 273 or use the equation [tex]T_C+273=T_K[/tex].
Thus, [tex]T_1=(18.1+273)[K]=291.1[K][/tex] and [tex]T_2=(12.5+273)[K]=285.5[K][/tex]
To solve for the requested quantity, note that all of the other units match between beginning and end, so we substitute and solve:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]
[tex]\dfrac{(2.61[atm])V_1}{(291.1[K])}=\dfrac{(1.92[atm])(59.9[mL])}{(285.5[K])}[/tex]
[tex]\dfrac{(2.61[atm] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----})\bold{V_1}}{291.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}*\dfrac{291.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}{2.61[atm]\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}=\dfrac{(1.92[atm]\!\!\!\!\!\!\!\!\!\!\!{--})(59.9[mL])}{285.5[K\!\!\!\!\!{-}]}*\dfrac{291.1[K\!\!\!\!\!{-}]}{2.61[atm]\!\!\!\!\!\!\!\!\!\!\!{--}}[/tex]
[tex]V_1=44.928677576[mL][/tex]
Accounting for significant digits, [tex]V_1=44.9[mL][/tex]
which are not oxidative reaction?
(look at the image)
Answer:
Cu²+ e ----> Cu+This is not oxidation as it gain electron .
Oxidation reaction means addition of oxygen or removal of hydrogen
or in other words loss of electrons
Mg ----> Mg²+ + 2e
this is oxidation reaction as Mg loss 2e to become +2
Sn³+ -----> Sn4+ + 2e
this is oxidation reaction as it losses electrons
similarly other are also oxidation.
determine the enthalpy change when 7.08g of Ag is obtained. use the abbreviated form of the unit in your answer.
2AgBr(s) -> 2Ag(s) + Br2(l) deltaH = -220kJ
2AgBr(s) ⇒ 2Ag(s) + Br₂(l) ΔH = -220kJ ⇒ for 2 mol Ag
mol Ag = 7.08 : 108 g/mol = 0.065
the enthalpy change = 0.065/2 x -220 kJ = -7.15 kJ
classify the following into colloids, suspensions and true solution: soda water,chalk powder,milk,blood,ink,starch solution,sulphur powder in water,egg albumin.
Answer:
Amm is this right (if is it the right so mark me the brainliest pls)
Explanation:
Answer : Solutions- Brine, Soda water. Suspensions- Muddy river water, Chalk water mixture, Milk of magnesia, Smoke in air. Colloids- Milk, Ink, Blood, shaving cream.
Rank the gases Ar, N2, CH4, and C₂H6 in order of increasing density at STP.
Rank the gases Ar, N2, CH4, and C2H6 in order of increasing density at STP.
ans : CH4
2 attempts left check my work
be sure to answer all parts.
calculate the density of a solid substance if a cube measuring 2.72 cm on one side has a mass of 129 g.
Answer:
6.41 gm / cm^3
Explanation:
cube volume = 2.72 x 2.72 x 2.72 cm^3 = 20.124
Density = mass / volume = 129 g / 20.124 cm^3 = 6.41 gm / cm^3
What happens to the atomic radius when an electron is gained?
OA. The negative ionic radius is larger than the neutral atomic radius
B. The negative ionic radius is smaller than the neutral atomic radi
C. The negative ionic radius is the same size as the neutral atomic
radius.
D. The negative ionic radius does not follow a trend with the neutra
radius.
Suppose you use bottles and balloons to run an experiment to measure the amount of metabolism by yeast. One of your bottles has black coffee and yeast, with a balloon sealing the top of the bottle. After 3 hours, you note that the balloon has not inflated at all. What is the most likely reason that it did not inflate
The yeast was not able to metabolize the sugar in black coffee and so, no carbon dioxide was produced.
What is the product of the action of glucose on yeast?Yeast metabolizes sugar or glucose to produce alcohol and carbon dioxide.
The carbon dioxide produced is responsible for the raising action of yeast on dough and for the inflation of the balloon.
In the experiment, the possible reason why the balloon did not inflate is that the yeast was not able to metabolize the sugar in black coffee and so, no carbon dioxide was produced.
Learn more about yeast action on sugar at: https://brainly.com/question/27389229
#SPJ11
