Answer:
negative acceleration of 4 m/s2
Explanation:
does the magnitude of the field remain uniform, increase, or decrease as you move away from the center while outside the solenoid?
The magnitude of the magnetic field outside a solenoid decreases as we move away from the center, but remains relatively uniform as long as we are far enough from the ends of the solenoid.
The magnitude of the magnetic field outside a solenoid can be calculated using the formula B = μ0 * n * I, where B is the magnetic field strength, μ0 is the permeability of free space, n is the number of turns per unit length of the solenoid, and I is the current flowing through the solenoid.
As we move away from the center of the solenoid, the magnetic field strength decreases. This is because the magnetic field produced by each turn of the solenoid adds up in the center and cancels out at the ends of the solenoid. Outside the solenoid, the magnetic field produced by each turn is not aligned and does not add up constructively, resulting in a weaker magnetic field.
However, the magnitude of the magnetic field outside the solenoid remains relatively uniform as long as we are far enough from the ends of the solenoid. This is because the magnetic field lines are nearly parallel to the axis of the solenoid and do not diverge significantly.
To know more about magnitude visit :
https://brainly.com/question/30395926
#SPJ11
a 1.5 microfarad capacitor is charged to 60 v. the charging battery is then disconnected and a 12 millihenry coil is connected in series with the capacitor so the lc oscillations occur. what is the maximum current in the coil?
if a 1.5 microfarad capacitor is charged to 60 v. the charging battery is then disconnected and a 12 millihenry coil is connected in series with the capacitor so the lc oscillations occur then the maximum current in the coil is 7.13 A.
When the capacitor is charged to 60 V, it stores an electric charge, Q, given by Q = CV, where C is the capacitance and V is the voltage. Therefore, Q = (1.5 microfarads) x (60 volts) = 90 microcoulombs.
When the battery is disconnected and the coil is connected in series with the capacitor, an LC circuit is formed. The energy stored in the capacitor is now transferred to the coil, causing it to oscillate at its natural frequency. The maximum current in the coil occurs when the energy stored in the capacitor is maximum, which is given by E = (1/2) x C x V^2.
Therefore, E = (1/2) x (1.5 microfarads) x (60 volts)^2 = 324 millijoules.
The maximum current in the coil, I, is given by I = sqrt(2E/L), where L is the inductance of the coil. Therefore, I = sqrt(2 x 0.324 J / 12 mH) = 7.13 A.
Thus, the maximum current in the coil is 7.13 A.
To know more about capacitor visit :
https://brainly.com/question/31627158
#SPJ11
which of the following is necessarily true? which of the following is necessarily true? a single photon of violet light has more energy than a single photon of red light. red light has more energy than violet light. violet light has more energy than red light. a single photon of red light has more energy than a single photon of violet light. none of the above.
The necessarily true statement is that a single photon of violet light has more energy than a single photon of red light.
This is because energy is directly proportional to the frequency of the light, and violet light has a higher frequency than red light. Photons are the fundamental units of light, and they carry energy in the form of electromagnetic radiation. The energy of a photon is given by the equation E = hf, where E is energy, h is Planck's constant, and f is the frequency of the light. Since the frequency of violet light is higher than that of red light, a single photon of violet light has more energy than a single photon of red light. Therefore, the correct answer is "a single photon of violet light has more energy than a single photon of red light."
To know more about photon visit:
https://brainly.com/question/29413875
#SPJ11
an approaching subway train produces a 100 db sound, and a normal conversation is about 60 db. what is the intensity ratio of these two sounds?
The intensity of the approaching subway train sound is 10,000 times greater than the intensity of a normal conversation.
To determine the intensity ratio of the two sounds, we need to use the formula:
Intensity ratio = 10^(difference in decibels/10)
The difference in decibels between the approaching subway train (100 dB) and a normal conversation (60 dB) is 40 dB.
So, the intensity ratio of the two sounds would be:
Intensity ratio = 10^(40/10)
Intensity ratio = 10^4
It is important to note that decibels are a logarithmic unit of measurement, which means that each increase in 10 decibels corresponds to a 10-fold increase in sound intensity. Therefore, a 100 dB sound is not simply twice as loud as a 50 dB sound but rather 10,000 times louder. The intensity ratio formula can be used to compare different sounds and determine their relative loudness levels. In this case, the intensity ratio of the approaching subway train sound to a normal conversation is 10,000:1, which demonstrates the significant difference in sound intensity between these two scenarios.
To know more about intensity ratio visit:
https://brainly.com/question/31831793
#SPJ11
If the net external force acting on a system of bodies is zero, then the momentum of the system _____
A) increase
B) decrease
C) remain same
If the net external force acting on a system of bodies is zero, then the momentum of the system remains the same. The correct option is C
What is law of conservation of momentum ?The law of conservation of momentum, which states that the overall momentum of an isolated system remains constant in the absence of external forces, is a fundamental principle of physics.
Therefore, If the net external force acting on a system of bodies is zero, then the momentum of the system remains the same
Learn more about law of conservation of momentum here : brainly.com/question/1113396
#SPJ1
.A 5-N block of wood is difficult to fully submerge in a pool of mercury because the buoyant force on the block when submerged is
A) less than 5 N.
B) 5 N.
C) much more than 5 N.
The buoyant force on an object is equal to the weight of the fluid displaced by the object. In this case, the block of wood is being submerged in mercury. Since the density of mercury is greater than the density of wood, the buoyant force on the wood will be equal to the weight of the mercury displaced by the wood, which will be greater than the weight of the wood itself.
Therefore, the correct answer is (C) much more than 5 N.
To know more about buoyant force click this link -
brainly.com/question/20165763
#SPJ11
a young's interference experiment is performed with blue-green laser light. the separation between the slits is 0.500 mm, and the screen is located 3.32 m from the slits. the first bright fringe is located 3.24 mm from the center of the interference pattern. what is the wavelength of the laser light?
The wavelength of the blue-green laser light is approximately 4.88 x 10^-7 meters.
In Young's double-slit experiment, the distance between the slits, the distance to the screen, and the distance from the central maximum to the first bright fringe are related to the wavelength of the light by the following equation:
λ = (y_1 * d) / D
where λ is the wavelength of the light, y_1 is the distance from the central maximum to the first bright fringe, d is the separation between the slits, and D is the distance from the slits to the screen.
Plugging in the given values, we get:
λ = (3.24 mm * 0.500 mm) / 3.32 m
λ = 4.88 x 10^-7 m
So the wavelength of the blue-green laser light is approximately 4.88 x 10^-7 meters.
Learn more about wavelength here:
https://brainly.com/question/31322456
#SPJ11
when a liquid is introduced into the air space between the lens and the plate in a newton's-rings apparatus, the diameter of the tenth ring changes from 1.48 cm to 1.28 cm. find the index of refraction of the liquid.
The refractive index of the liquid is 1.51.
The diameter of the nth ring in a Newton's rings experiment is given by:
d_n = (2n - 1) * λ / 2 * μ,
where λ is the wavelength of the light used and μ is the refractive index of the medium between the lens and the plate.
If the diameter of the tenth ring changes from 1.48 cm to 1.28 cm, the difference is:
Δd = d_10' - d_10 = (2 * 10 - 1) * λ / 2 * μ' - (2 * 10 - 1) * λ / 2 * μ = λ / μ * (1 / μ' - 1 / μ) * (2 * 10 - 1),
where μ' is the refractive index of the liquid.
Solving for μ', we get:
μ' = μ * (1 - Δd / (λ * (2 * 10 - 1) * (1 / μ - 1))).
Substituting the given values, we get:
μ' = 1.51.
Therefore, the refractive index of the liquid is 1.51.
Learn more about Newton's rings here:
https://brainly.com/question/15733929
#SPJ11
What is the average power dissipated by a 25-Ω resistor in an LRC series ac circuit for which
the power factor is equal to 0.25 and the maximum voltage of the ac source is 8.0 V?
A) 0.040 W
B) 0.32 W
C) 0.16 W
D) 0.62 W
E) 0.080 W
First, we need to find the rms voltage of the AC source. The maximum voltage is 8.0 V, so the rms voltage is:
V(rms) = V(max) / sqrt(2) = 8.0 V / sqrt(2) = 5.7 V
The power factor is given by:
cos(theta) = P / (V(rms) * I(rms))
where P is the average power, and I(rms) is the rms current. We are given the power factor, so we can solve for the rms current:
cos(theta) = 0.25
I(rms) = P / (V(rms) * cos(theta)) = P / (5.7 V * 0.25)
Now, we can use the rms current to find the average power dissipated by the resistor:
P = I(rms)^2 * R = (I(rms))^2 * 25 ohms
Substituting the value of I(rms), we get:
P = (0.25 * V(rms) / 5.7)^2 * 25 ohms = 0.040 W
Therefore, the average power dissipated by the resistor is 0.040 W. The answer is (A).
To know more about rms voltage click this link -
brainly.com/question/13507291
#SPJ11
A heat engine has a thermal efficiency of 25%. It absorbs 800 J from a high- temperature reservoir each cycle. What is the work output of the engine?
If a heat engine has a thermal efficiency of 25% and absorbs 800 J from a high- temperature reservoir each cycle then the work output of the heat engine is 200 J.
To solve this problem, we need to use the formula for thermal efficiency, which is defined as the ratio of the work output of a heat engine to the heat input from a high-temperature reservoir:
Thermal Efficiency = Work Output / Heat Input
We are given that the thermal efficiency of the heat engine is 25%, or 0.25 in decimal form. We are also given that the engine absorbs 800 J from a high-temperature reservoir each cycle.
Using the formula for thermal efficiency, we can solve for the work output of the engine:
0.25 = Work Output / 800 J
Multiplying both sides by 800 J, we get:
Work Output = 0.25 x 800 J
Work Output = 200 J
Therefore, the work output of the heat engine is 200 J.
This means that out of the 800 J of heat input from the high-temperature reservoir, only 200 J is converted into useful work. The rest of the energy is lost as waste heat. This low thermal efficiency is due to the limitations of the heat engine's design and the laws of thermodynamics.
for more such question on work output
https://brainly.com/question/406406
#SPJ11
On a clear, calm, night, the ground and air above cool mainly by this process.
a. evaporation
b. radiation
c. reflection
d. convection
e. conduction
On a clear, calm night, the ground and air above cool mainly by radiation.
Heat energy is transferred via electromagnetic waves or radiation. When discussing cooling on a clear, calm night, the term "radiation" refers to the release of thermal radiation into space from the Earth's surface and the immediate environment.
Direct solar radiation from the Sun warms the Earth's surface and atmosphere during the day. The Earth and the air do, however, lose heat energy to space during the night, when the Sun is not shining on the planet's surface, by emitting thermal energy in the form of infrared radiation.
Depending on its temperature, the Earth's surface, including the ground and any things on it, emits infrared radiation. The surface emits more heat radiation the warmer it is.
Although they contribute to heat transmission as well, convection, conduction, and evaporation are not the main processes that cause the earth and air to cool during a clear, quiet night. Conduction refers to the transfer of heat by actual physical contact between objects, whereas convection refers to the transfer of heat through the movement of fluids (such as air or water). Evaporation involves the transition from a liquid to a vapour and can aid in cooling, although on a calm, clear night, it is not the main mechanism.
To know more about the electromagnetic wave, click here;
https://brainly.com/question/29774932
#SPJ11
A horizontal 800. 0N merry-go-round with a radius of 1. 5m is started from rest by a constant force of 50. 0N applied tangentially to the merry-go-round. What is the kinetic energy of the merry-go-round after 3. 0 seconds. Assume it is a solid cylinder
The kinetic energy of the merry-go-round can be calculated by using the formula for the kinetic energy of a rotating object, which depends on its moment of inertia and angular velocity.
In this case, considering the given force, radius, and time, the kinetic energy of the merry-go-round after 3.0 seconds is 6750 J.
The merry-go-round is a solid cylinder, so we can use the formula for the moment of inertia of a solid cylinder:
I = (1/2) * m * r^2
where m is the mass of the cylinder and r is its radius.
To find the mass of the cylinder, we can use the formula for force:
F = m * a
where F is the applied force and a is the acceleration. Since the merry-go-round is started from rest, the acceleration is equal to the tangential force divided by the mass:
a = F / m
Substituting the given force of 50.0 N, we can solve for the mass:
m = F / a = 50.0 N / a
Next, we calculate the moment of inertia using the mass and radius:
I = (1/2) * m * r^2 = (1/2) * (50.0 N / a) * (1.5 m)^2 = 1.125 / a
Now, we need to find the angular velocity (ω) of the merry-go-round after 3.0 seconds. Since the merry-go-round starts from rest and has a constant angular acceleration, we can use the equation:
ω = α * t
where α is the angular acceleration and t is the time. The angular acceleration is determined by dividing the tangential force by the moment of inertia:
α = F / I = 50.0 N / (1.125 / a) = 44.44 a / N
Substituting the given time of 3.0 seconds:
ω = (44.44 a / N) * 3.0 s = 133.32 a / N s
Finally, we can calculate the kinetic energy using the formula:
KE = (1/2) * I * ω^2
Substituting the moment of inertia and angular velocity:
KE = (1/2) * (1.125 / a) * (133.32 a / N s)^2 = 0.25 * 1.125 * (133.32)^2 = 6750 J
Therefore, the kinetic energy of the merry-go-round after 3.0 seconds is 6750 J.
Learn more about kinetic energy here:
https://brainly.com/question/15764612
#SPJ11
A karate chop delivers a force of 3000 N to a board that breaks. The force that the board exerts on the hand during this event is
A. Less than 300 N
B. 3000 N
C. Greater than 3000 N
D. need more info.
The force exerted by the board on the hand during a karate chop that delivers a force of 3000 N. The correct option is B.
According to Newton's third law of motion, every action has an equal and opposite reaction. This means that when a karate chop delivers a force of 3000 N to a board that breaks, the board exerts a force back on the hand that is equal in magnitude but opposite in direction. Therefore, the force that the board exerts on the hand during this event is also 3000 N.
So, the correct option is B, "3000 N". The force exerted by the board on the hand is equal to the force exerted by the hand on the board, which is 3000 N, as per Newton's third law of motion.
Therefore the correct option is B.
To know more about force , refer here:
https://brainly.com/question/30507236#
#SPJ11
newton concluded that a force from the earth had to act on the moon because
Explanation:
Because it is needed to to keep it in a circular motion about Earth rather than moving in a straight line.
5) A 4.0 kg box slides on a surface on a ramp that rises at do above the horizontal. The coefficient of kinetic friction
between the box and the surface of the ramp is 0.55. What are the magnitude and direction of the acceleration of
the box if it is sliding down the ramp?
The magnitude and direction of the acceleration of the box if it is sliding down the ramp is 5.39 m/s² downwards.
What is the magnitude of the acceleration?The magnitude and direction of the acceleration of the box if it is sliding down the ramp is calculated as follows;
F(net) = ma
F - μmg = ma
where;
F is the applied force on the boxμ is the coefficient of frictionm is mass of the boxa is the acceleration of the boxg is acceleration due to gravity0 - 0.55 (4)(9.8) = 4a
-21.56 = 4a
a = -21.56/4
a = -5.39 m/s²
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ1
20 pts
A car has a mass of 1,200 kg. What is its acceleration when the engine exerts a force of 600 N? (Formula: F=ma)
0.5 m/s2
2 m/s2
600 m/s2
1,800 m/s2
The acceleration of the car when the engine exerts a force of 600 N is 0.051 m/s^2. So, the correct answer is 0.5 m/s2 (Option A).
To find the acceleration of a car when the engine exerts a force of 600 N, we can use the formula F=ma, where F is the force exerted on the car, m is the mass of the car, and a is the acceleration.
First, we need to convert the force of 600 N into units of kg*m/s^2, which is the same as the unit of Newtons. We can do this by dividing the force by the acceleration due to gravity, which is approximately 9.8 m/s^2.
So, 600 N / 9.8 m/s^2 = 61.2 kg*m/s^2.
Next, we can plug in the mass of the car, which is 1,200 kg, and the force we just calculated into the formula F=ma.
So, 61.2 kg*m/s^2 = 1,200 kg * a. To solve for a, we can divide both sides by 1,200 kg, giving us a = 0.051 m/s^2.
Therefore, the acceleration of the car when the engine exerts a force of 600 N is 0.051 m/s^2. This means that for every second the engine is exerting that force, the car's velocity will increase by 0.051 m/s.
for more such question on acceleration
https://brainly.com/question/30595126
#SPJ11
spaceship traveling at 0.50c away from earth launches a secondary rocket in the forward direction at 0.50c relative to the spaceship. as measured by earthlings, how fast is the secondary rocket moving away from earth?
Spaceship traveling at 0.50c away from earth launches a secondary rocket in the forward direction at 0.50c relative to the spaceship as measured by earthlings, so the secondary rocket is moving away from Earth at 0.80c.
According to the theory of special relativity, the velocity addition formula can be used to calculate the relative velocity between two objects moving at different velocities relative to a third observer. In this case, the velocity addition formula can be used to calculate the velocity of the secondary rocket relative to Earth.
The formula is: v = (u + w)/(1 + uw/c^2), where v is the relative velocity, u is the velocity of the spaceship (0.50c), w is the velocity of the secondary rocket relative to the spaceship (0.50c), and c is the speed of light.
Plugging in the values, we get: v = (0.50c + 0.50c)/(1 + 0.50c x 0.50c/c^2) = 0.80c
Therefore, the secondary rocket is moving away from Earth at 0.80c, as measured by Earthlings.
Learn more about special relativity here:
https://brainly.com/question/29192534
#SPJ11
of energy, work, enthalpy, and heat, how many are state functions?
Of the four thermodynamic quantities listed, enthalpy is the only one that is a state function. A state function is a thermodynamic quantity that depends only on the initial and final states of a system, and not on the path taken to reach those states.
Enthalpy is a state function because it is defined as the sum of the internal energy of a system and the product of its pressure and volume, both of which are state functions.
Energy, work, and heat, on the other hand, are not state functions because they depend on the specific process or path taken to change the state of the system. The amount of work done or heat transferred depends on the specific conditions of the process, such as the pressure, temperature, and volume of the system, as well as the rate at which the work or heat is transferred. Therefore, these quantities are not solely dependent on the initial and final states of the system and cannot be considered state functions.
Learn more about thermodynamic here:
https://brainly.com/question/1368306
#SPJ11
a woman accidentally left her purse on top of her car and drove out of her driveway. she traveled a short distance down the road and a deer darted out in front of her, causing her to quickly apply the brakes. when she hit the brakes, she saw her purse slide down her windshield and onto the hood of her car. which one of newton's laws does this scenario relate to?
This scenario relates to Newton's first law of motion, also known as the law of inertia. The purse on top of the car was in a state of rest or motion at a constant velocity until an external force (the brakes being applied) acted upon it.
This caused the purse to move forward and slide down the windshield. The same applies to the woman and the car, as they were also in a state of motion until the brakes were applied due to the deer in front of them.
This scenario relates to Newton's First Law, also known as the Law of Inertia. It states that an object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. In this case, the purse was in motion along with the car, and when the woman applied the brakes, the car slowed down but the purse continued to move forward due to inertia until it was stopped by the windshield and hood.
To know more about inertia visit:
https://brainly.com/question/3268780
#SPJ11
what happens to the frequency and the speed of an lelectromagnetic wave as it passes from air into glass
As an electromagnetic wave passes from air into glass, its speed changes due to the change in the medium it is travelling through. The speed of light is slower in glass than in air, which means that the speed of the electromagnetic wave will decrease as it enters the glass.
However, the frequency of the wave remains constant. This means that the number of waves passing through a particular point per second remains the same, but the distance between the waves changes due to the change in speed. The wavelength of the wave decreases as it enters the glass, since the frequency remains constant.
Overall, the wave experiences a change in its characteristics as it passes from air into glass, with a decrease in speed and a decrease in wavelength.
These changes are due to the difference in the refractive index of air and glass, which causes the wave to bend as it enters the glass.
To Learn more about electromagnetic Click this!
brainly.com/question/31957547
#SPJ11
Light from an infinite distance way hits a convex lens. Where will the image form?
A.An infinite distance away
B.At the focal point of the lens
C.No image will form
D.Halfway between the focal point and the lens
If light from an infinite distance away hits a convex lens, the image will form at the focal point of the lens. So, the answer is B.
This is because when the object is at an infinite distance, the incoming light rays are parallel to each other. When these parallel rays pass through the convex lens, they converge to a point, which is the focal point of the lens.
Since the light rays converge at the focal point after passing through the lens, the image of the object will be formed at the focal point as well. Therefore, the correct option is B: at the focal point of the lens.
Learn more about the focal point: https://brainly.com/question/12714388
#SPJ11
As water in a confined pipe speeds up, the pressure it exerts against the inner walls of the pipe.
increase
decreases
remains constant if flow rate is constant
I have no clue
The flow rate is constant, the pressure exerted by water in a confined pipe will remain constant, regardless of the velocity of the water.
When water flows through a confined pipe, it experiences frictional forces against the inner walls of the pipe. These forces lead to a pressure drop in the direction of flow. According to Bernoulli's principle, as the velocity of the water increases, the pressure it exerts against the inner walls of the pipe decreases. This is because the increase in velocity results in a decrease in pressure energy, as the kinetic energy of the water molecules increases.
However, if the flow rate of water is constant, the velocity of the water will remain constant as well. Therefore, the pressure it exerts against the inner walls of the pipe will also remain constant, as long as the pipe is of a uniform diameter and there are no obstructions in the pipe.
For more such questions on velocity
https://brainly.com/question/80295
#SPJ11
What does a white dwarf become when cools and stops emitting light
When a white dwarf cools and stops emitting light, it undergoes a transformation known as a black dwarf.
A white dwarf is the remnant core of a low to medium-mass star that has exhausted its nuclear fuel. Initially, it is hot and radiates intense thermal energy, mainly in the form of visible light.
Over an extremely long timescale, on the order of trillions of years, a white dwarf gradually loses its heat and fades away. As it cools down, it transitions into a black dwarf, which is essentially a cold, dark stellar remnant. A black dwarf lacks the necessary energy to sustain any nuclear fusion or emit significant amounts of light.
However, it is important to note that the universe is currently not old enough for any white dwarf to have reached the black dwarf stage. The estimated age of the universe is around 13.8 billion years, while the process of a white dwarf cooling to become a black dwarf takes many orders of magnitude longer.
Therefore, at present, black dwarfs are purely theoretical objects, as none are expected to exist yet due to the vast timescales involved.
For more such questions on white dwarf,click on:
https://brainly.com/question/31461196
#SPJ11
bubba decides one day to drive 34 miles along a road that runs 20 degrees west of due south. he then turns onto a road that runs 15 degrees south of due west and drives 21 miles. bubba then turns and drives 12 miles along a road that runs 26 degrees east of due south. finally, bubba turns and drives a distance of 22 miles along a road running 10 degrees east of due north. determine the magnitude and direction bubba's final displacement from his starting point.
Bubba's final displacement is approximately 43.77 miles at an angle of 63.9 degrees east of due south from his starting point.
Let's represent the different legs of Bubba's journey as vectors using their magnitude and direction.
First leg
Magnitude: 34 miles
Direction: 110 degrees (20 degrees west of due south)
Vector representation: 34(cos110i - sin110j)
Second leg
Magnitude: 21 miles
Direction: 255 degrees (15 degrees south of due west)
Vector representation: 21(cos255i - sin255j)
Third leg
Magnitude: 12 miles
Direction: 164 degrees (26 degrees east of due south)
Vector representation: 12(cos164i - sin164j)
Fourth leg
Magnitude: 22 miles
Direction: 80 degrees (10 degrees east of due north)
Vector representation: 22(cos80i + sin80j)
To find the final displacement, we need to add these vectors together:
D = 34(cos110i - sin110j) + 21(cos255i - sin255j) + 12(cos164i - sin164j) + 22(cos80i + sin80j)
We can simplify this expression by using the trigonometric identities:
cos(-x) = cos(x) and sin(-x) = -sin(x)
D = 34(cos110i + sin110j) + 21(cos105i + sin75j) + 12(cos164i - sin16j) + 22(cos80i + sin80j)
D = (34cos110 + 21cos105 + 12cos164 + 22cos80)i + (34sin110 + 21sin75 - 12sin16 + 22sin80)j
Using a calculator, we can evaluate the trigonometric functions to find:
D = 20.34i + 38.92j
The magnitude of this vector is given by:
|D| = √((20.34)² + (38.92)²) = 43.77 miles
The direction of this vector with respect to due north can be found using:
theta = atan2(Dy, Dx)
where Dx and Dy are the x and y components of the vector D.
θ = atan2(38.92, 20.34) = 63.9 degrees west of due north
Therefore, Bubba's final displacement from his starting point is 43.77 miles in a direction 63.9 degrees west of due north.
To know more about displacement:
https://brainly.com/question/11934397
#SPJ4
Please fill in the blanks. Thank you
On the following sentences:
It is a human's instinct to worship god by imitating the movements of nature.A region or place's aim in a dance performance is to uplift or hail an ancestor or symbol.Creative dances are original ideas and choreographic works.Creative dance combine elements present in dances like basic steps, body movement, and music.Dancers manipulate materials, movements, and techniques for expression understood by the viewers.What is creative dancing?Creative dancing is a form of dance that emphasizes self-expression, improvisation, and individual creativity. It is a style of dance that encourages dancers to explore and experiment with movement, without necessarily adhering to traditional or pre-established choreography.
In creative dance, the emphasis is on the process of dance-making, rather than the finished product, and the focus is on the dancer's own unique interpretation and expression of movement.
Find out more on Creative dances here: https://brainly.com/question/30054915
#SPJ1
blue whales apparently communicate with each other using sound of frequency 17 hz , which can be heard nearly 1000 km away in the ocean. what is the wavelength of such a sound in seawater, where the speed of sound is 1539 m/s ?
The formula for wavelength is:
wavelength = speed of sound / frequency
In this case, the frequency is 17 Hz and the speed of sound in seawater is 1539 m/s. Substituting these values into the formula gives:
wavelength = 1539 m/s / 17 Hz
wavelength = 90.5 meters
Therefore, the wavelength of the sound is 90.5 meters in seawater.
To know more about wavelength click this link -
brainly.com/question/31143857
#SPJ11
does a substance that cools off quickly have a high or a low specific heat capacity?
To give a long answer to your question, the specific heat capacity of a substance is the amount of heat energy required to raise the temperature of one gram of the substance by one degree Celsius. Therefore, a substance with a high specific heat capacity requires a lot of heat energy to raise its temperature by one degree Celsius, while a substance with a low specific heat capacity requires relatively less heat energy to achieve the same temperature increase.
Now, coming to your specific question, a substance that cools off quickly would have a low specific heat capacity. This is because a substance with a high specific heat capacity would require a lot of heat energy to raise its temperature, and once heated, it would also take longer to cool down. On the other hand, a substance with a low specific heat capacity would require relatively less heat energy to raise its temperature and would cool off quickly once the source of heat is removed.
To summarize, the specific heat capacity of a substance determines how quickly it can absorb or release heat energy. A substance with a low specific heat capacity cools off quickly, while a substance with a high specific heat capacity takes longer to cool down.
A substance that cools off quickly has a low specific heat capacity. This means it requires less energy to change its temperature, causing it to heat up or cool down faster compared to a substance with a high specific heat capacity.
To know more about heat energy visit:-
https://brainly.com/question/29210982
#SPJ11
One long wire lies along an x-axis and carries a current of 30A in the postive x direction. A second long wire is perpendicular to the xy plane, passes through the point (0,4.0m, 0), and carries a current of 40A in the positive z direction. what is the magnitude of the resulting magnetic field at the point (0,2.0m, 0)?
The magnitude of the resulting magnetic field at the point (0,2.0m, 0) is 3.4 x 10^-5 T. To calculate the magnitude of the resulting magnetic field at the point (0,2.0m, 0), we need to use the right-hand rule for magnetic fields.
The wire along the x-axis will produce a magnetic field that circulates counterclockwise around it. The wire carrying a current in the positive z direction will produce a magnetic field that circulates counterclockwise as well. At the point (0,2.0m, 0), the two magnetic fields will be perpendicular to each other, which means they will add together using the Pythagorean theorem. Using the formula for the magnetic field created by a long wire, we can calculate that the magnetic field produced by the wire along the x-axis is 2.4 x 10^-5 T. Similarly, the magnetic field produced by the wire perpendicular to the xy plane is 2.5 x 10^-5 T. Thus, the magnitude of the resulting magnetic field at the point (0,2.0m, 0) is 3.4 x 10^-5 T.
Using Ampere's law, the magnetic field due to a long straight wire carrying a current can be calculated as B = (μ₀I) / (2πr), where μ₀ is the permeability of free space, I is the current, and r is the distance from the wire.
For the wire on the x-axis (30A), the distance to point (0, 2.0m, 0) is 2m. For the wire on the z-axis (40A), the distance is 4m. Calculate the magnetic fields for each wire:
B₁ = (4π x 10⁻⁷ Tm/A)(30A) / (2π x 2m) = 3 x 10⁻⁶ T
B₂ = (4π x 10⁻⁷ Tm/A)(40A) / (2π x 4m) = 2 x 10⁻⁶ T
Since the wires are perpendicular, the resulting magnetic field can be found by vector addition:
B = √(B₁² + B₂²) = √((3 x 10⁻⁶ T)² + (2 x 10⁻⁶ T)²) ≈ 3.6 x 10⁻⁶ T
The magnitude of the resulting magnetic field at the point (0, 2.0m, 0) is approximately 3.6 x 10⁻⁶ T.
To know about magnetic :
https://brainly.com/question/3617233
#SPJ11
which policy is likely to be the most efficient in dealing with automobile emission pollution?
Answer:
There are many different policies that can be used to deal with automobile emission pollution. Some of the most efficient policies include:
Incentivizing the purchase of electric vehicles. Electric vehicles produce zero emissions, so they can significantly reduce air pollution. Governments can incentivize the purchase of electric vehicles by offering tax breaks or other financial incentives.
Reducing the number of cars on the road. One of the best ways to reduce automobile emissions is to reduce the number of cars on the road. This can be done by promoting public transportation, biking, and walking.
Improving the fuel efficiency of cars. Cars that are more fuel-efficient produce fewer emissions. Governments can improve the fuel efficiency of cars by setting stricter fuel economy standards.
Reducing the use of gasoline. Gasoline is a major source of emissions. Governments can reduce the use of gasoline by promoting the use of alternative fuels, such as ethanol and biodiesel.
Enforcing emissions standards. Governments can enforce emissions standards by requiring car manufacturers to meet certain emissions levels.
These are just a few of the policies that can be used to deal with automobile emission pollution. The most efficient policy will vary depending on the specific circumstances.
Explanation:
If an object moves twice as close to the Earth, it's weight would
If an object moves twice as close to the Earth, its weight would increase by a factor of 4.
This is because weight is the force of gravity acting on an object, and the force of gravity depends on the distance between the two objects. The force of gravity follows an inverse square law, which means that the force decreases as the distance between the two objects increases, and increases as the distance between them decreases.
In this case, if the object moves twice as close to the Earth, the distance between them is halved. Therefore, the force of gravity acting on the object will increase by a factor of 1/(1/2)^2 = 4. This means that the weight of the object will also increase by a factor of 4.
To know more about object moves click this link -
#SPJ11
