Simply put, if a ball is thrown over a cliff at zero initial velocity, it will reach the bottom in five seconds. The distance equation is presented below.
What occurs if you throw a ball horizontally while standing high above the ground?The time required for an entity to initially travel horizontal is due to the average required for the item to reach its ultimate height. As a result, a ball that is thrown horizontally and rebounded the same height will both touch the ground at the same time.
What is the ball's acceleration when it is at its highest point?Response: 0 m/s. Any projectile has zero instantaneous speed when it reaches its maximum height. Because the same acceleration is provided by gravity to.
to know more about horizontally visit:
https://brainly.in/question/25632455
#SPJ4
Simply put, if a ball is thrown over a cliff at zero initial velocity, it will reach the bottom in five seconds. The distance equation is presented below.
What occurs if you throw a ball horizontally while standing high above the ground?The time required for an entity to initially travel horizontal is due to the average required for the item to reach its ultimate height. As a result, a ball that is thrown horizontally and rebounded the same height will both touch the ground at the same time.
What is the ball's acceleration when it is at its highest point?Response: 0 m/s. Any projectile has zero instantaneous speed when it reaches its maximum height. Because the same acceleration is provided by gravity to.
To know more about horizontally visit:
https://brainly.com/question/13978942
#SPJ1
What is one kg mass Class 8?.
What is the smallest unit of power Mcq?.
The electron volt (eV) is the smallest unit of energy used in atomic and nuclear physics.
What is energy?In physics, energy is the quantitative property that is transferred to a body or a physical system and is visible in the form of heat and light. The law of conservation of energy states that energy can be converted in form but cannot be created or destroyed. Energy is defined by scientists as the ability to perform work. People have learned how to convert energy from one form to another and then use it to do work, which makes modern civilization possible. Energy is the ability to perform work. It can take the form of a potential, kinetic, thermal, electrical, chemical, nuclear, or other energy.
Here,
In atomic and nuclear physics, the electron volt (eV) is the smallest unit of energy.
To know more about energy,
https://brainly.com/question/29792091
#SPJ4
What is the relationship between the formula weight of a substance and its molar mass?.
The formula weight of a substance is the sum of the atomic weights of all the atoms in the molecular formula of the substance, while the molar mass of a substance is the mass of one mole of that substance.
The formula weight and molar mass of a substance are related in that the molar mass of a substance is equal to the formula weight of the substance divided by the Avogadro constant (6.022x10^23). Thus, the molar mass of a substance is numerically equal to the formula weight but expressed in grams per mole instead of atomic mass units.
This is because the Avogadro constant is a conversion factor that is used to convert the formula weight of a substance to the molar mass of the substance.
To know more about molecular formulas refer to the link brainly.com/question/28647690
#SPJ4
Which three activities consume the most fuel in modern societies?
a. Cooking, air conditioning, transportation
b. Construction, lighting, entertainment
c. Manufacturing, transportation, entertainment
d. Heating, transportation, electricity generation
The correct option is : (d) Heating, transportation and electricity generation.
Energy is one of the major inputs for the economic development of the country. Any sustainable energy source that comes from the natural environment is a renewable energy source. Renewable energy is inexhaustible and a clean alternative to fossil fuelsRenewable energy is energy that is produced from natural processes and continuously replenished. A few examples of renewable energy are sunlight, water, wind, tides, geothermal heat, and biomass. The energy that is provided by renewable energy resources is used in 5 important areas such as air and water cooling/heating, electricity generation, the rural sector, and transportation.The existence of renewable energy resources is spread over a wide geographical area in comparison to the conventional energy resources which are often concentrated in a limited number of countries like the oil and gas are mostly concentrated in the Middle East countries. The use of renewable energy resources in energy generation is resulting in less pollution and has a significant effect on economic benefits and energy security.To know more about renewable energy visit:
https://brainly.com/question/19604560
#SPJ4
what is the wavelength of a beam of light having a frequency of 6 × 10^17 hz?
The wavelength of the of a beam of light having a frequency of 6 × 10^17 hz is 5*10^(-8)m or 50nm.
Data given as per the question:
Frequency of the wavelength: 6 × 10^17 hz
As we know that,
Speed of light = Frequency × wavelength
Speed of light (c)=3×[tex]10^{8}[/tex] m/s.
Frequency (f)=6×10[tex]10^{14}[/tex] Hz (given)
Wavelength (λ)=?
As per the formula,
λ= [tex]\frac{c}{f}[/tex]
= 5*10^(-8)m or 50nm
The wavelength of light can be defined as the distance between the two successive crests or troughs of the light wave. It is actually denoted by the Greek letter lambda (λ). Hence, the distance between either one crest or trough of one wave and the next wave is known as wavelength.
Learn more about wavelength:
brainly.com/question/20386238
#SPJ4
What are the 3 types of ballistics?.
Three types of ballistics are- Internal Ballistics, Transitional Ballistics and External Ballistics.
Internal ballistics, also known as initial ballistics, is concerned with what happens in the two milliseconds between the firing of the pin or striker and the exit of the bullet through the muzzle end of the barrel. The first phase involves the analysis of projection propulsion and flight.
The mediator between two regimes is involved in transitional ballistics ( internal and external). Intermediate ballistics is a process that begins shortly after a bullet has been fired.
External ballistics is concerned with the trajectory of the bullet after it has exited the barrel. The second phase investigates the situation when the bullet is about to strike the target and exit the projectile. It examines the trajectory of a projectile.
Learn more about projectile here:
https://brainly.com/question/11422992
#SPJ4
How to find total distance traveled from position function?
Total distance traveled from position function is found by:
Differentiating the position function to get velocity function.Integrating the velocity function under proper limits.Example : Find the total distance traveled for a particle traveling in a horizontal motion from t = 0 to t = 5 seconds according to the position function:
s(t) = 8t^2 – 4t.
Step 1: Find the velocity function. The velocity function is the derivative of the position function. So, to find the velocity function you need to differentiate s(t) = 4t^2 – 2t, using the power rule and derivative of a constant rule:v(t) = 16t – 4
Step 2: Set the velocity function to zero, then solve, to find where the velocity function changes direction:v(t) = 16t – 4 = 0
16t – 4 (+ 4) = 0 (+ 4)
16t(/16) = 4 (/16)
t = 4/16 = 1/4
Step 3: Solve the position function for the starting and ending interval values (which are 0 and 5, according to the question), and any t-values you found in step 2:s(0) = 8(0)^2 – 4(0) = 0.
s(1/4) = 8(¼)^2 – 4(1/4) = -½
s(5) = 8(5)^2 – 4(5) = 180.
Step 4: Find the distance traveled between each point. These are vectors, so we have to use absolute values to find the distance:Between 0 and -½, distance = |-½ – 0| = ½ & Between -½ and 180, distance = |180 – (-½)| = 180½
Step 5: Add your values from Step 4 together to find the total distance traveled.½ + 180 ½ = 181
To know more about speed visit:
https://brainly.com/question/28576931
#SPJ4
What is the formula of rate of change of momentum Class 9?.
We can then conclude that the force exerted equals the change in the rate of momentum. Momentum is well-known to be equal to mass times velocity.
Velocity or speed: which is greater?The direction & speed of a moving vehicle moving along a path are specified by velocity as opposed to speed. Speed is therefore a vector rather than a scalar.
the velocity formula's availability.According to the equation v = s/t, velocity (v) is a dimensionless quantity that quantifies displacement (notice shift in location, s) through shifts in time (t).
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ4
What is the SI unit of acceleration Mcq?.
Because the unit of speed is the meter per second and the unit of time is the second, the SI unit of acceleration is the meter per second squared, or m / s2.
What is acceleration?In mechanics, acceleration is defined as the rate of change of an object's velocity with respect to time. Vector quantities are accelerations. The orientation of an object's acceleration is determined by the orientation of its net force. The rate of change of velocity is defined as acceleration. Acceleration usually indicates that the speed is changing, but this is not always the case. When an object moves in a circular path at a constant speed, it is still accelerating because its velocity direction changes. The definition of acceleration is. The rate at which velocity changes with respect to time. Because it has both magnitude and direction, acceleration is a vector quantity.
Here,
Because the meter per second is the unit of speed and the second is the unit of time, the SI unit of acceleration is meter per second squared, or m / s2.
To know more about acceleration,
https://brainly.com/question/13262345
#SPJ4
The magnitude of the electrostatic force between two point charges is F. If the distance between the charges is doubled, the electrostatic force between the charges will becomeanswer choicesF/44FF/22F
F/4F is the correct answer because the electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between the charges.
This means that if the distance is doubled, the inverse of the square of the distance will increase four times, thus reducing the force by a factor of one-fourth. So, if the distance is doubled, the electrostatic force between the charges will become F/4F.
This can be expressed mathematically as F1/d2 = F2/d22, where F1 is the original force and d1 is the original distance and F2 is the new force and d2 is the new distance. Thus, if d2 is doubled, the new force will be F/4F.
To know more about electrostatic force refer to the link brainly.com/question/9774180
#SPJ4
How will the electrostatic force be changed if the distance between two electric charges is tripled?.
The force between two charged objects is inversely proportional to the square of their distance, according to Coulomb's Law. As a result, the force will weaken by a factor of 9 if the distance is tripled.
When the distance is tripled, what happens to the electrostatic force?Additionally, the electrostatic force decreases by a factor of nine when the separation distance is tripled, or increased by a factor of 3.
When there is a doubled distance between two charges, what will happen to the electrostatic force?As the distance between the two charges increases by a factor of four, so does the magnitude of the force. As a result, the attraction or repulsion decreases to one-fourth of its original value if the distance between the two charges is doubled.
To learn more about electrostatic force here:
https://brainly.com/question/9774180
#SPJ4
7. What kind of force acts on a ladybug inside a can that is
whirled in a circular path?
Neglecting gravity, just one force—directed toward the circular motion's center—is applied to the whirling can. This force is centripetal.
What happens to a body when whirled in a circular path?Because displacement is always perpendicular to applied force when a body is rotating in a circle, there is no work done. Additionally, the centripetal force acts along the circle's radius and at a right angle to the body's motion when a body moves in a circular route.The insect forces the can outward. A ladybird at the bottom of a rotating tin can feels centrifugal force pressing it against the can's bottom.When an object travels around a circle, its direction and speed change at each point. Centripetal force is the force responsible for this velocity or acceleration. Circular motion causes an object to constantly change.To learn more about force refer to:
https://brainly.com/question/12785175
#SPJ1
What is the angle between the vector A 3i 4j K and B =- 4i 4j 4k?.
The angle between the vectors A and B is arccos(0.5) equal to 60 degree
The angle between two vectors can be found using the dot product, which is a measure of the similarity between the two vectors. The dot product is calculated by multiplying the corresponding components of the two vectors and then summing the results. In this case, the dot product of vectors A and B is (3 ×-4) + (44) + (k4k)
= -12 + 16 + 0 = 4.
The dot product is related to the angle between the two vectors by the following equation:
cos∅ = A × B / (A × B)
Where theta is the angle between the two vectors, A . B is the dot product of the two vectors, and A and B are the magnitudes (lengths) of the vectors. To find the angle you need to find the inverse cosine of this value.
Using the dot product formula,
= A . B / (A × B) = 4 / (3^2 + 4^2 + k^2) * (-4^2 + 4^2 + 4^2) = 0.5.
Then, taking the inverse cosine of 0.5 gives an angle of arccos(0.5) = 60 degrees between the vectors A and B.
To learn more about vectors
https://brainly.com/question/14447709
#SPJ4
What is the unit in which torque is measured Mcq?.
SI Torque Unit
Considering the equation Torque = Power X Distance Torque is defined in newton-meters, whereas length is measured in meters and pressure is measured in newtons.
What is the torque measurement device?Result for an image What is the Mcq unit used to measure torque,
dynamometer, a tool for calculating the amount of mechanical force or power delivered by a rotor shaft. All strength dynamometers are essentially thrust devices; the shaft speed is monitored separately. Power is the result of torque (moving force) and angular speed.
Describe Torque Mcq?The propensity of a force to initiate or modify an object's rotational motion is known as torque. Moment or instant of force are other names for torque. Torque is vector form.
to know more about motion visit:
https://brainly.com/question/30338175
#SPJ4
Categorize processes related to transform boundaries. Sort the following processes those likely to be related to a transform boundary or those likely associated with other boundary types
Categorization processes related to transform boundaries is earthquakes, other boundaries include divergence, convergence, subduction.
What activities take place at the boundaries of transform plate?Tectonic plates colliding horizontally at a plate boundary constitutes the third type of plate boundary. A transform plate boundary is what we have here. Huge stresses that result from the plates rubbing against one another can split rock under certain conditions, causing earthquakes. These cracks are referred to as faults in these locations.
At a transform plate boundary, the grinding motion between the plates causes shallow earthquakes, significant rock displacement to the side, and a significant expansion of the crustal zone.
To know more about transform boundaries visit:
https://brainly.com/question/13311455
#SPJ4
the service disconnecting switch for an installation consisting of a limited load on a single branch circuit shall have a rating of not less than ? .
The service disconnecting switch for an installation consisting of a limited load on a single branch circuit shall have a rating of not less than 15A.
The service disconnecting switch for an installation consisting of a limited load on a single branch circuit shall have a rating of not less than the ampacity of the branch circuit. The ampacity is the maximum amount of electrical current a conductor or circuit can safely carry without overheating. This rating ensures that the service disconnecting switch can handle the electrical load of the branch circuit without overheating or becoming damaged.
The National Electric Code (NEC) and local codes specify the ampacity of the conductors and the service disconnecting switch to be used for different types of electrical loads, such as residential, commercial or industrial. The ampacity of the conductors and the service disconnecting switch should be selected based on the anticipated load and the conditions of use, including the ambient temperature, the number of conductors in a raceway and the type of insulation.
It's worth noting that if the load is a non-continuous load the switch should be rated for the non-continuous load and if the load is a continuous load the switch should be rated for the continuous load. In both cases the switch should be able to handle the maximum load.
It's important to follow the NEC and local codes when selecting the ampacity of the service disconnecting switch to ensure that the electrical installation is safe and reliable.
Learn more about service disconnecting switch here:
https://brainly.com/question/30289566
#SPJ4
When the value of g at the surface of the earth is 9. 8 m/s2 then what will be the value of g at a place 480 km above the surface of the earth radius of the earth 6400 km?.
The value of g at a place 480 km above the surface of the earth will be 8.49 m/s². If the value of g at the surface of the earth is 9.8 m/s².
Acceleration due to gravity of the earth is mathematically defined as
g = GM/R²......(1)
Where G is the universal gravitational constant, M is the mass of the earth, and R is the radius of the earth or the distance of the object on which the acceleration due to gravity of the earth is to calculate.
R = 6400 km
h = 480 km
g₁ = GM/(R+h)²......(2)
On dividing the equation (2) by equation (1)
g₁/g = R²/(R+h)²
g₁ = gR²/(R+h)²
g₁ = 9.81 × (6400)²/(6400+480)²
g₁ = 8.49 m/s²
To know more about Acceleration due to gravity, here
https://brainly.com/question/13860566
#SPJ4
What is the expression for momentum Mcq?.
p = m v . The equation demonstrates because momentum is directly related to an object's motion (m) and velocity (v).
In the actual world, what is momentum?Almost every action that involves motion has momentum. It is an important tenet of physics. In athletics, the term "momentum" is frequently used. For instance, if a team is moving forward and trying to stop, it will be difficult.
How do you define momentum?singular nouns Momenta, plural for momentums. force or rate of motion; impulse, as of a tangible thing or sequence of events: Going downward, the automobile picked up speed.
To know more about momentum visit:
https://brainly.com/question/24030570
#SPJ4
What is the T formula in physics?.
Time (T) in physics : Divide is required, as shown by the T's top, and multiplication is required, as shown by the T's vertical line. distance ÷ speed = time.
Like how a meter is one foot and a second one second, so too. The relationship between speed, distance, and time is described using the formula speed distance time. Speed is calculated as distance divided by time.
You can also calculate the time by dividing the distance traveled by the speed. The third input can be calculated if you know two of the inputs. Drawing a T helps to visualize the T-Method, which is crucial for demonstrating the link between Total, Part, and Rate.
Learn more about T formula Visit: brainly.com/question/19469862
#SPJ4
How do I reduce latency on my website?.
There are several ways to reduce latency on your website: optimize images, minimize HTTP etc.
Use a Content Delivery Network (CDN): A CDN stores copies of your website on servers located in different geographic locations. When a user requests your website, they are served the copy from the nearest server, reducing the amount of time it takes for the website to load.
Optimize images and other media: Large images and other media files can slow down your website. Optimize these files by reducing their size without sacrificing quality.
Minimize HTTP requests: Every time a browser requests a file from your website, it adds to the latency. Minimize the number of requests by using CSS sprites, combining files, and using a script loader.
Use a caching plugin: Caching stores a copy of your website on the user's browser, reducing the amount of time it takes for the website to load on subsequent visits.
These are some ways to reduce latency on your website, implementing these tips will help to improve the load time and user experience of your website.
To know more about latency click here:
https://brainly.com/question/29781666
#SPJ4
A 60 kg person runs with a velocity of 4 m/s and jumps onto a 5 kg skateboard and rolls away. What is the final velocity of the person on the skateboard?
(round your answer to the nearest tenth)
Answer: Final velocity is [tex]3.8 m/s[/tex]
Explanation:
We are given mass and velocity, or mass in motion, known in physics as "momentum".
The formula for momentum is [tex]p=mv[/tex] (mass*velocity)
First, calculate the momentum of the person running:
[tex]p=60kg*4m/s[/tex]
[tex]p=240(kg*m/s)[/tex]
When the person jumps on the skateboard, the mass changes and now we're solving for the velocity. Use the same formula above to solve.
[tex]240=(60+4)*v[/tex] can be rewritten as [tex]v=\frac{240kg*m/s}{(60+4)kg}[/tex] or [tex]v=\frac{p}{m}[/tex]
Solve and the kg cancels out and you're left with a final velocity of [tex]3.75 m/s[/tex] or [tex]3.8m/s[/tex] rounded to nearest tenth.
In what time period did hydroelectric power usage?.
The period did hydroelectric power usage in the Late 19th/Early 20th century.
Hydroelectric power has been used for thousands of years in various forms. The ancient Greeks and Romans used water wheels to grind grain and perform other tasks. The first recorded use of hydroelectric power for industrial purposes was in 1878 when a water turbine was used to generate electricity at the Cragside estate in Northumberland, England. The first hydroelectric power station was built in 1881 by the inventor of the water turbine, James B. Francis, in Lowell, Massachusetts, USA.
However, it was not until the late 19th and early 20th centuries that hydroelectric power began to be widely used for industrial and commercial purposes. The growth of the hydroelectric power industry was driven by the increasing demand for electricity for lighting, heating, and power for industry. The use of hydroelectric power expanded rapidly in the early 20th century, particularly in Europe and North America, and it continues to be an essential source of electricity worldwide.
So, the period when hydroelectric power usage started to be widely used for industrial and commercial purposes was in the late 19th and early 20th century.
To learn more about hydroelectric power visit the link:
https://brainly.com/question/15228003
The un,earth and moon are roughly pherical like a ball. How do we know that the earth i a phere and not flat
The evidences that the Earth is a sphere not flat.
When we watch a ship sail off to sea, the mast and flag appear to slowly sink.When we climb a tree, the farther we climb the farther our line of sight will extend to the horizon.The length of the shadow at different places on the Earth is not the same.Seeing the curvature of the Earth from an airplane during the flight.Watching the sunset from higher place will get a clear horizon than watching from the lower place.During the lunar eclipse, we will see that the Earth's shadow is round.The Earth is A SphereThe Earth we know, is a sphere that rotates on its axis for about 24 hours. It also revolves around the Sun for about 365 days. Like other celestial bodies, researchers say that the Earth is round, a sphere.
There are many evidences that the Earth is a sphere. Some of them are as explained above.
Learn more about the Earth here:
brainly.com/question/12041467
#SPJ4
What unit of sound is measured in Mcq?.
The decibel is the unit of measurement for sound. dB stands for decibel.
What is decibel?The decibel is a unit of measurement that is one-tenth of a bel. It is the logarithmic ratio of two values of a power or root-power quantity. Two signals with one decibel difference in level have a power ratio of 101/10 or a root-power ratio of 10120. The decibel (dB) is a logarithmic unit of measurement for sound level. It is also widely used in electronics, communications, and signals. The dB is a logarithmic measure of a ratio. Power, sound pressure, voltage, or intensity are all examples of ratios.
Here,
The decibel is the unit of sound measurement. dB is an abbreviation for decibel.
To know more about decibel,
https://brainly.com/question/12607432
#SPJ4
arthur benjamin says that the current top of the pyramid of mathematics curriculum is
Arthur Benjamin says that the current top of the pyramid of mathematics curriculum is calculus.
Calculus is the subject that the mathematics curriculum builds up to, according to Arthur Benjamin, who made this statement in a well-known TED talk. The pyramid's incorrect summit is that one. Statistics should be the proper pinnacle that every high school graduate knows.
American mathematician Arthur T. Benjamin, who was born on March 19, 1961, specialises in combinatorics. He is the Smallwood Family Professor of Mathematics at Harvey Mudd College, where he has taught mathematics since 1989.
He is well renowned for his aptitude for mental math and for his live audience "Mathemagic" presentations. In newspaper and magazine stories, TED Talks, and the Colbert Report, his mathematical prowess has been praised.
Learn more about calculus
brainly.com/question/28795935
#SPJ4
What does this experiment tell you about the amount of energy transfer that is required to change the temperatures of three different liquids?.
Each of the liquids had a different rate of energy transfer. The thermal energy within the thing increases if the object's mass rises while its temperature remains constant.
The term "energy transfer" describes the transfer of energy from one location to another. Consider the electricity that enters your wall socket, travels through a charger, and finally enters a battery. From the electrical outlet to the battery, energy is being transmitted.
One instance of energy transmission by radiation is the Sun's heating of the Earth. Another illustration is the heating of a space by an open-hearth fireplace. The things in the room receive some of the heat that is radiated by the flames, coals, and hot bricks.
Learn more about temperatures Visit: brainly.com/question/26866637
#SPJ4
is copper a good conductor of heat
Yes, copper is a good conductor of heat.
Copper is a good conductor of heat along with silver, aluminum etc. What makes copper a good conductor of heat is that it has free electrons moving inside it. The electrons can move freely through it which makes transfer of heat and its dissipation faster. The free electrons makes the conduction of heat and electricity possible. These electrons are called conduction electrons.
That's why copper is used in many cooking utensils, fuses and as a heat sink in electrical appliances. It is a good conductor of electricity also.
Learn more about heat conduction here,
https://brainly.com/question/11697798
What is the per unit value Mcq?.
The per-unit value of any quantity is defined as the ratio of its actual value in any unit to its base or reference value in the same unit. The price per unit has no dimensions.
What is per unit value?Per unit is a way of expressing a quantity's value in terms of a reference or base quantity. Each system variable or quantity in a per unit system is normalized with respect to its own base value. Because quantities expressed per unit are the same regardless of voltage level, calculations are simplified. The per-unit value of any quantity is defined as the ratio of its actual value in any unit to its base or reference value in the same unit. The price per unit has no dimensions. In the power system industry, the per-unit system is widely used to express voltages, currents, powers, and impedances of various power equipment. It is commonly found in transformers and AC machines.
Here,
Any quantity's per-unit value is defined as the ratio of its actual value in any unit to its base or reference value in the same unit. The price per unit is dimensionless.
To know more about per unit value,
https://brainly.com/question/28704916
#SPJ4
What is Coulomb's law and its SI unit?.
What is the dot product of 2i 4j 5k and 3i 2j k?.
The dot product of 2i+4j+5k and 3i+2j+k is 19.
The total of the products of the matching components makes up the dot product, or inner product, of two vectors. It is equivalently equal to their product times the cosine of the angle between them. The square of a vector's magnitude is the dot product of a vector with itself.
A two-vector or bivector tensor is the type. It is a linear functional that transforms two-forms into real numbers while simultaneously being the dual of a two-form. The tensor product of two vectors yields a two-vector. In light of this, two vectors may only be said to be collinear if they are on the same line or parallel to one another in the same or opposite direction.
The first vector is: 2i+4j+5k
The second vector is: 3i+2j+k
The dot product of the two vectors:
= 2(3) +4(2) + 5(1)
= 6+8+5
=19
Learn more about dot product Visit: brainly.com/question/9795347
#SPJ4
Correct Question:
What is the dot product of 2i+4j+5k and 3i+2j+k ?
