help me solve it pls​

The real bond angles are;

1) 104 degrees

2) 180 degrees

3) 119 degrees

4) 120 degrees

5) 107 degrees

6) 109.5 degrees

The VSEPR (Valence Shell Electron Pair Repulsion) theory is a model used in chemistry to predict the shape of individual molecules based on the repulsion between valence electrons pairs in the outermost electron shell of an atom.

We know that we can look at the presence or the absence of the lone pairs or symmetry in the compound as as to ascertain the real bond angles of the compounds listed in the question.

The bond angles can be obtained from chemical litearture.

Learn more about VSEPR :https://brainly.com/question/29755556

#SPJ1

Answer:

1) 104.5

2) 180

3) 119

4) 120

5) 107.8

6) 109.5

Explanation:

The functional group within the compound is ketone.

Ketones are a common functional group in organic chemistry. Ketones have important physiological properties.

Ketones can be named using either the common system or the IUPAC system. In the common system, ketones names are created by naming the groups attached to the carbonyl carbon and then adding the word ketone.

In ketones, the carbonyl group has two hydrocarbon groups attached to it. These can be either aromatic rings or alkyl groups. Ketone does not have a hydrogen atom attached to the carbonyl group.

Learn more about ketones, here:

https://brainly.com/question/4439718

#SPJ1

The missing genotype in the punnett square are as follows:

A punnet square is a graphical representation used in genetics to determine the probability of an offspring expressing a particular genotype.

According to this question, a mother with the genotype 'Bb' (heterozygous) is crossed with a father with genotype 'bb' (homozygous recessive).

The cross between these two parents i.e. Bb × bb, is illustrated in the punnett square above. However, two of the genotype of the offsprings were missing. The possible offsprings' genotype from this cross are as follows:

Learn more about punnet square at: https://brainly.com/question/26538737

#SPJ1

In order to melt 2kg of ice the heat that is required is: 709.87 kJ

The total heat required is gotten from the formula:

Total heat = Heat required to convert 2kg of ice to 2kg of water at  0℃ + Heat required to convert 2kg of water at 0℃ to 2kg of water at 5℃

Thus:

Heat = mh_fg + mCpΔt

We ae given that:

m(mass of ice) = 2kg

hfg (latent heat of fusion of ice) = 334kJ

Cp of water (specific heat) = 4.187 kJ/kg-k

Δt(temperature difference) = 5℃

Therefore,

Heat required = (2 × 334) + (2 × 4.187 × (5 − 0))

= 709.87 kJ

Read more about Specific Heat Energy at: https://brainly.com/question/30738335

#SPJ1

The reactant molecules must hit with each other in the proper orientation and with adequate energy, according to collision theory, for a reaction to take place.

The Haber process is a chemical reaction that produces heat and ammonia (NH₃) from hydrogen gas (H₂) and nitrogen gas (N₂). At a high temperature of roughly 600 °C and a pressure of roughly 200 atm, iron catalyses the process.

By taking into account the interactions between molecules, collision theory explains how chemical processes take place.

Molecules that are reactants may either bounce off one another when they collide without reacting, or they may react and produce products.

Learn more about collision theory, here:

https://brainly.com/question/14566831

#SPJ1

Regarding this response, the appropriate statement is:.

B. The reaction is exothermic.

Because the potential energy of the products is lower than that of the reactants, energy must be released during the reaction. This indicates that the reaction is exothermic, which means that heat is released as a form of energy. Given that glycerol and potassium permanganate react spontaneously when combined, which suggests that the reaction is energetically advantageous, this is consistent with the fact that the reaction is favorable. The following statements are false in this situation: A. Due to the energy released during the reaction, the total potential energy of the system is not constant. C. The system's activation energy is always positive, so it can never be negative. Since endothermic reactions draw energy from their surroundings, the reaction is not endothermic.

Answer: B

Explanation:

If the potential energy of the products is less than that of the reactants, that must mean that some potential energy was converted into thermal energy during the reaction. Since the reaction released heat, the reaction is exothermic.

The Valence Bond Theory (VBT) examines how atoms interact to explain chemical bonding.

.Valence bond theory states that the overlapping of partially filled atomic orbitals is what results in bonds.

.Ground-state molecular orbital configuration=σ 1 s, σ * 1 s, σ 2 s, σ * 2 s, σ 2 p z, π 2 p x = π 2 p y, π * 2 p x = π * 2 p y, σ * 2 p z

.bond order =1/2(bonding electron- non bonding electron)

A chemical bonding theory which explains the chemical connection between two atoms is the valence bond (VB) theory. It uses the concepts of quantum mechanics to describe bonding, similar to molecular orbital (MO) theory.

.Valence bond theory states that the overlapping of partially filled atomic orbitals is what results in bonds.

.Ground-state molecular orbital configuration=σ 1 s, σ * 1 s, σ 2 s, σ * 2 s, σ 2 p z, π 2 p x = π 2 p y, π * 2 p x = π * 2 p y, σ * 2 p z

.bond order =1/2(bonding electron- non bonding electron)

To know more about valence bond (VB) theory, here:

https://brainly.com/question/29075903

#SPJ1

Two factors that determine the position where pigments are deposited in the chromatogram from the point of origin are polarity and solubility.

Polarity is a measure of the distribution of charge within a molecule. In chromatography, a polar solvent is used to carry the pigments up the chromatography paper.

The pigments with a higher polarity will be more attracted to the polar solvent and will travel up the paper at a faster rate. This means that they will be deposited closer to the point of origin than pigments with lower polarity.

Solubility is another factor that determines the position where pigments are deposited in the chromatogram. Pigments that are more soluble in the solvent will travel further up the paper than pigments that are less soluble. The solubility of pigments is influenced by their molecular structure, size, and polarity.

In summary, the position where pigments are deposited in the chromatogram from the point of origin is determined by the polarity and solubility of the pigments.

Pigments with higher polarity and solubility will travel further up the paper and will be deposited closer to the point of origin, while those with lower polarity and solubility will travel a shorter distance and will be deposited further from the point of origin.

Know more about  polarity   here:

https://brainly.com/question/17118815

#SPJ11

The false statement about the gas expansion process is "∆S(system)=0".

When the gas expands into the vacuum, it undergoes an irreversible process. The gas molecules move from a region of high concentration to a region of low concentration, and as a result, there is an increase in entropy (∆S) of the gas.

According to the Second Law of Thermodynamics, the entropy of an isolated system will always increase for an irreversible process. Therefore, the entropy of the system, in this case, the gas, increases as it expands into the vacuum. The false statement about the gas expansion process is "∆S(system)=0". The other statements are true for this process. Since there is no temperature difference between the gas and the surroundings, the change in temperature is zero (∆T=0). The change in internal energy (∆E) is also zero since the gas is expanding against no external pressure. Finally, since there is no heat transfer between the system and the surroundings, the work done (∆PE + ∆KE) is equal to the heat transfer (w = q).

for more questions on gas
https://brainly.com/question/25736513
#SPJ11

Answer:

The duration between two events is called Interval.

An oxygen gas has a volume of 225 mL at 75.0° C and 175 mmHg the volume of the oxygen gas at the new conditions is 12 mL.

We can use the combined gas law to solve for the volume of the oxygen gas at the second set of conditions:

(P1 * V1) / (T1) = (P2 * V2) / (T2)

Where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature.

Converting the initial conditions to SI units:

V1 = 225 mL = 0.225 L

T1 = 75.0 + 273.15 = 348.15 K

P1 = 175 mmHg = 0.23 atm

Converting the final conditions to SI units:

T2 = 20.0 + 273.15 = 293.15 K

P2 = 11000 mmHg = 14.47 atm

Now we can solve for V2:

V2 = (P1 * V1 * T2) / (T1 * P2)

V2 = (0.23 * 0.225 * 293.15) / (348.15 * 14.47)

V2 = 0.012 L = 12 mL

Therefore, the volume of the oxygen gas at the new conditions is 12 mL.

For more details regarding volume, visit:

https://brainly.com/question/1578538

#SPJ1

Answer:

Explanation:

The use of standard units has revolutionized measuring systems by providing a consistent framework, promoting accuracy and precision, enabling comparability, and fostering advancements in measurement technology.

The introduction and use of standard units have greatly improved the measuring systems in several ways.

1. Consistency and Comparability: Standard units provide a common reference point for measurements, ensuring consistency and comparability across different systems and locations. By using standardized units such as the International System of Units (SI), measurements can be accurately compared and communicated worldwide.

2. Precision and Accuracy: Standard units are based on well-defined and internationally accepted definitions, allowing for precise and accurate measurements. They provide clear guidelines for calibration and measurement techniques, reducing errors and uncertainties in the measuring process.

3. Interdisciplinary Compatibility: Standard units facilitate interdisciplinary compatibility by enabling seamless integration of measurements from various fields of science and engineering. Researchers and professionals from different disciplines can exchange and combine data without the need for complex unit conversions, enhancing collaboration and knowledge sharing.

4. Traceability: Standard units are traceable to national or international measurement standards, which ensures the accuracy and reliability of measurements. Traceability provides a clear chain of measurement comparisons, allowing for the establishment of confidence intervals and uncertainties in measured values.

5. Technological Advancements: The adoption of standard units has driven advancements in measurement technologies. The need for accurate and traceable measurements has spurred the development of more precise instruments, improved calibration techniques, and enhanced measurement methodologies.

For more such questions on measurement.

https://brainly.com/question/24842282

#SPJ8

The pH of the solution prepared by dissolving 1.30g of sodium acetate in 60.5 mL of 0.20 M acetic acid is approximately 3.34.

To calculate the pH of the solution, we need to consider the equilibrium between the acetic acid (CH3COOH) and its conjugate base, acetate ion (CH3COO-), using the Ka value provided. We will also take into account the presence of sodium acetate (CH3COONa), which will provide additional acetate ions.

First, let's determine the moles of acetic acid present in the solution:

Moles of acetic acid = concentration x volume

Moles of acetic acid = 0.20 M x 60.5 mL x (1 L / 1000 mL)

Moles of acetic acid = 0.0121 mol

Next, let's determine the moles of sodium acetate:

Moles of sodium acetate = mass / molar mass

Moles of sodium acetate = 1.30 g / 82.03 g/mol

Moles of sodium acetate = 0.0158 mol

Since sodium acetate dissociates completely, the concentration of acetate ions (CH3COO-) will be equal to the moles of sodium acetate divided by the total volume of the solution:

Concentration of acetate ions = moles of sodium acetate / total volume

Concentration of acetate ions = 0.0158 mol / 60.5 mL x (1 L / 1000 mL)

Concentration of acetate ions = 0.260 M

Now, we can set up an ICE (Initial, Change, Equilibrium) table to calculate the concentrations of acetic acid and acetate ions at equilibrium:

CH3COOH(aq) + H2O(l) ⇌ CH3COO-(aq) + H3O+(aq)

Initial: 0.0121 M 0 M 0 M

Change: -x +x +x

Equilibrium: 0.0121 - x x x

The Ka expression for acetic acid is:

Ka = [CH3COO-][H3O+] / [CH3COOH]

Using the given Ka value, we can set up the equation:

1.75 x 10^-5 = (x)(x) / (0.0121 - x)

Since x is expected to be small compared to 0.0121, we can approximate the denominator as 0.0121:

1.75 x 10^-5 = x^2 / 0.0121

Simplifying the equation:

x^2 = 1.75 x 10^-5 x 0.0121

x^2 = 2.1175 x 10^-7

x ≈ 4.6 x 10^-4

Now, we can calculate the concentration of H3O+ ions:

[H3O+] = x = 4.6 x 10^-4 M

Finally, we can calculate the pH using the formula:

pH = -log[H3O+]

pH = -log(4.6 x 10^-4)

pH ≈ 3.34

for more such questions on sodium acetate

https://brainly.com/question/18723442

#SPJ8

There may be more than one way to interpret data.

People need multiple ways to understand the information. This way, they can determine if an explanation is correct in case they don't understand.

Answer:hey ok so the answer is “ that there may be more than one way to interpret date” or just C

Explanation:

I got 100% on the test please give me likes :))))))))

Propane is a hydrocarbon gas that can react with oxygen to produce carbon dioxide and water. This reaction is an example of combustion, where a fuel reacts with oxygen to release energy in the form of heat and light.

The balanced chemical equation for this reaction is:
C3H8 + 5O2 → 3CO2 + 4H2O
This equation tells us that for every mole of propane that reacts, we need 5 moles of oxygen. However, it also tells us that for every mole of oxygen that reacts, we produce 3 moles of carbon dioxide.
This means that the ratio of carbon dioxide to oxygen in this reaction is 3:1. So if we want to produce a certain amount of carbon dioxide, we need to make sure we have enough oxygen to react with the propane. For example, if we want to produce 6 moles of carbon dioxide, we would need 2 moles of oxygen (since 6/3 = 2).
Similarly, if we want to know how much oxygen we need to react with a certain amount of propane, we can use the ratio of propane to oxygen (1:5). For example, if we have 2 moles of propane, we would need 10 moles of oxygen (since 2 x 5 = 10).
Overall, the reaction between propane and oxygen is an important one in many industries, including heating and cooking. Understanding the stoichiometry of this reaction can help us predict how much of each reactant we need to produce a certain amount of product, and can help us optimize our processes for efficiency and safety.

For  more such question on hydrocarbon.

https://brainly.com/question/14498010

#SPJ11

Option (c) is expected to deviate most strongly from the given law.

The law states that the partial pressure of each component in an ideal solution is proportional to its mole fraction in the solution. Deviations from Raoult's law occur when the intermolecular interactions between the molecules of the components in the solution are different from those between the molecules of the pure components. The solvent mixture that is expected to deviate most strongly from Raoult's law is the one that has the largest difference in intermolecular interactions between its components.

Among the given choices, option (c) is expected to deviate most strongly from the given law. Butane (C4H10) and octanol (C8H17OH) have very different intermolecular interactions, as butane is nonpolar and octanol is polar. The resulting solution is expected to have different intermolecular forces than either pure component, leading to significant deviations from Raoult's law. Options (a), (b), and (d) are expected to show smaller deviations from Raoult's law, as the intermolecular interactions between the components in each of these mixtures are more similar.

for more such questions on deviate
https://brainly.com/question/25750315
#SPJ11

Answer:

Explanation:

Here's the answer.

To estimate the approximate base of the cumulus clouds, we first need to determine the lifting condensation level (LCL), which is the height at which the air reaches saturation and clouds begin to form as it rises.

To calculate the LCL, we can use the following formula:

LCL = (T - Td) x 400

Where:

T is the temperature in Fahrenheit at the surface

Td is the dew point temperature in Fahrenheit at the surface

In this case, T = 70°F and Td = 48°F:

LCL = (70 - 48) x 400

LCL = 8800 feet MSL

So, the base of the cumulus clouds would likely be around 8800 feet MSL. However, this is just an estimate and the actual height of the cloud base can vary due to other factors such as atmospheric stability, moisture content, and local topography.

The situation where erosion is likely to occur is B. A bare hillside with loose, dry soil

Erosion is an ongoing process of soil displacement when airflows or water currents move through landforms. Examples occur on hillside areas which have no plants, grasses, shrubs, or anything else to stabilize the dry dirt underneath – making it easy for wind and rainfall to literally transport the surface materials in downward cascades.

Unfortunately, this can yield serious consequences - from impoverished fertility to extra sediments being added to nearby creeks and rivers, to demolishing the infrastructure located at the base of the hill.

Find out more on erosion at https://brainly.com/question/21565095

#SPJ1

Options include;

The values of pH and pOH will be 7 in a neutral solution of water.

pH is defined as the negative logarithm of H⁺ ion concentration.

pH is a measure of how acidic or basic a substance is. In our everyday routine, we encounter and drink many liquids with different pH. Water is a neutral substance. Soda and coffee are often acidic.

The pH is an important property, since it affects how substances interact with one another and with our bodies. In our lakes and oceans, pH determines what creatures are able to survive in the water.

Kw = ionic product of water

Kw = 10⁻¹⁴

Kw = [H⁺] [OH⁻]

From the value of Kw,

[H⁺] = [OH⁻] = 10⁻⁷

pH =pOH = -log 10⁻⁷

pH = pOH = 7 for a neutral solution of water.

Learn more about pH, here:

https://brainly.com/question/2288405

#SPJ1

Answer:

Exothermic processes.

Explanation:

Answer:

Exothermic processes.

Explanation:

Exothermic processes will feel warm to the touch and show an increase in temperature. For example, when an 'instant hand warmer' is exposed to air a chemical reaction takes place that releases heat. This exothermic chemical reaction can be used to warm a person's hands when they are cold.

Dalton's law, which states that a gas mixture's overall pressure is equal to the sum of its component gases' partial pressures.

Thus, The pressure that each gas would produce if it occupied the same volume of the mixture by itself at the same temperature is known as the partial pressure.

The English chemist John Dalton stated this empirical relationship in 1801.

It derives from the kinetic theory of gases on the basis of an ideal (perfect) gas and presupposes no chemical interaction between the constituent gases. It roughly holds true for real gases when pressures are low enough and temperatures are high partial pressure.

Thus, Dalton's law, which states that a gas mixture's overall pressure is equal to the sum of its component gases' partial pressures.

Learn more about Partial pressure, refer to the link:

https://brainly.com/question/31214700

#SPJ1

Answer:The initial conditions of the nitrogen gas are:

n = 4 moles

V = 6.0 L

T = 177°C = 450 K

P = 12.0 atm

Using the ideal gas law:

PV = nRT

where R is the universal gas constant (0.08206 L atm/mol K).

We can rearrange the ideal gas law to solve for the final pressure (Pf) at a constant temperature:

Pf = (nRTf) / Vf

where T f and Vf are the final temperature and volume, respectively.

Since the expansion is isothermal, the temperature remains constant at 450 K. The final volume is 36.0 L. Thus:

Pf = (4 mol x 0.08206 L atm/mol K x 450 K) / 36.0 L

Pf = 16.37 atm

Therefore, the final pressure experienced by the nitrogen gas is 16.37 atm.

Explanation:

Answer:

0.620M

Explanation:

molarity= moles of solute/volume of solution

molar mass of mgs= 24.3+32= 56.3

moles= 33.9/56.3=0.601

molarity= 0.601/0.969=0.602M

Answer:

The mass of carbon in grams found in one molecule of the compound C7H804 is approximately 2.80 grams.