The electronic configuration of Lv element is [tex]5f^{14} 6d^{10} 7s^2 7p^4[/tex].
The electronic configuration of [tex]Lv^{+4}[/tex] is [tex]5f^{14} 6d^{10} 7s^2[/tex] .
What is electronic configuration?Electronic configuration, also called electronic structure, is the arrangement of electrons in energy levels around an atomic nucleus.
And also the possible union with hydrogen can give two possible compounds:
[tex]LvH_2 \;or LvH_4[/tex]
This is because the Livermorio compound can have two different oxidation states with the values 2 and 4. When reacting with the hydrogen that its charge is +1, these would be the two possible equations of a client to the different oxidation states with the ones that might react Lv.
It is a synthetic chemical compound and its number in the periodic table is 116.
Learn more about electronic configuration here:
https://brainly.com/question/13497372
#SPJ1
#1
Atomic no=116
Lies ahead of Renedium -86
Electronic configuration
[Rn]5f¹⁴6d¹⁰7s²7p⁴#2
Lv^4+ means 4 electrons donated
So it gets removed from p orbital
[Rn]5f¹⁴6d¹⁰7s²
Assume that you measured exactly 2.0 mL of the sodium chloride solution into a small test tube. How many moles of
sodium chloride are in the tube?
hello can you please help me
define x-ray with examples and it's uses?
Answer:
an x-ray a photographic or digital image of the internal composition of something, especially a part of the body, produced by X-rays being passed through it and being absorbed to different degrees by different materials.
examples
Abdominal x-ray.
Barium x-ray.
Bone x-ray.
Chest x-ray.
Dental x-ray.
Extremity x-ray.
Hand x-ray.
Joint x-ray.
Explanation:
its uses
An X-ray is a common imaging test that's been used for decades. It can help your doctor view the inside of your body without having to make an incision. This can help them diagnose, monitor, and treat many medical conditions.
a specialist that study substance obtained by attained mining is called a what
Answer:
Explanation:
Mining:
Mining is when certain substances are removed from the Earth, usually in large quantities. Mining can occur below the surface of the Earth via tunnels and caves. It can also occur at surface level through methods such as strip mining, which removes huge amounts of soil in the process
12. Consider the system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C. When some Cl2(g) is added at constant volume and temperature, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 wil
For a system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 is will increase
What is the ratio of the partial pressure of PCl5 to the partial pressure of PCl3?Generally, the equation for chemiecal reaction is mathematically given as
PC3 (g) + C₁₁₂ (g) = PC15 (g) 3
Assuming the addition of some Cl2 gas. The reaction will shift to the right at the invariant volume temperature, maintaining equilibrium. This results in a rise in P9Cl5(g) and a fall in PpCl3(g).
PpCl (g) /PpCl (g) will increase
Read more about Chemical Reaction
https://brainly.com/question/11231920
#SPJ1
The ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increase for a system PCl₃ (g) + Cl₂ (g) --> PCl₅ (g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C when some Cl₂ (g) is added at constant volume and temperature.
What is the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃?
Generally, the equation for chemical reaction is mathematically given as ;
PCl₃ (g) + Cl₂ (g) --> PCl₅ (g)
Assuming the addition of some Cl₂ gas,
The reaction will shift to the right at the constant volume and temperature, maintaining equilibrium.
This results in a rise in PCl₅ (g) and a fall in PCl₃(g).
Hence, the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increases
Read more about Chemical Reaction here;
brainly.com/question/11231920
#SPJ1
examples of molecular compound
Answer:
Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).
Which is the most likely to be reduced?
OA. Cu²+
OB. Zn²+
OC. Fe³+
OD. Fe2+
Answer:
OC. Fe³+
Explanation:
Greater reduction potential (bigger positive E value) means that things wants to get electrons. For this, you have to look at the chart that I have attached. Since, Fe3+ has highest E value out of other options, it will likely be reduced.
The species which is most likely to get reduced is Fe³⁺.
What is Reduction?Reduction is the process of the addition of electrons and loss of oxygen atoms. It is part of redox reactions.
Redox reactions are the type of reactions in which oxidation and reduction simultaneously take place. Oxidation is the addition of oxygen atoms. Reduction is the removal of oxygen atoms.
Redox reaction can be represented as:
PbO (s) + H₂ (g) → Pb(s) + H₂O (l)
In the above reaction, PbO is getting reduced and H₂ is getting oxidized.
Fe³⁺ is most likely to get reduced because the more positive the value of reduction potential, the more will be its tendency to get reduced.
In the given four species, the value of the reduction potential of Fe³⁺ is the highest.
Values of the reduction potential of four species are:
Cu²⁺ = 0.34Zn²⁺ = - 0.76Fe³⁺ = 0.77Fe²⁺ = -0.45Learn more about, redox reactions:
https://brainly.com/question/28300253
#SPJ7
what item is made from a synthetic material
Synthetic materials are made from natural resources and can be used for many purposes.
What is synthetic material ?Synthetic materials are made by chemically changing the starting substances to create a material with different characteristics. Some examples of synthetic materials are plastics, medicines, and new fuels.
A synthetic substance may be chemically identical to a naturally-occurring substance or may be different.
Item is made from a synthetic material :
Plastic bagPlastic bottleDisposable diaperSynthetic fiber/cloth (polyester, nylon, or rayon)KevlarArtificial sweetenerSynthetic fuel (Synfuel)Synthetic rubberChloroquine (Malaria drug)Taxol(Cancer drug)Physostigmine (Glaucoma drug)Aspirin
Learn more about synthetic material here ;
https://brainly.in/question/41964471
#SPJ1
What is the percent yield for the reaction below when
705.0 g SO2 and 80.0 g 0₂ produce 586.0 g SO3?
2SO2(g) + O2(g) → 2SO3(g)
The percent yield would be 68.3%
Percent yieldThis is given as:
Percent yield = yield/theoretical yield x 100%
From the equation:
[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]
The mole ratio of the reactants is 2;1
Mole of 705 g SO2 = 705/64 = 11.02 moles
Mole of 80 g O2 = 80/32 = 2.5 moles
O2 is limiting.
Mole ratio of O2 and SO3 = 1:2
Mole equivalent of SO3 = 2.5 x 2 = 5.0 moles
Mass of 5 moles SO3 = 5 x 80 = 400 grams
Percent yield = 400/586 = 68.3%
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
Number of molecules in .99 mol C6H5NO2
Answer:
5.96 * 10^23 molecules
Explanation:
Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer. The question is asking for the number of molecules. That means you do not break down each molecule to find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.
1 mol contains 6.01 * 10^23 molecules
0.99 mol contains x
1/0.99 = 6.02 * 10^23 / x molecules
x = 0.99 * 6.02 * 10^23
x = 5.96 * 10^23
Which of the following industries is leaching used in?
To separate a metal from its ore using acid and preserving desirable products such as gold.
To separate a mixture of ethanol and water
To separate a slurry containing chalk and water
None of the above.
Answer:
To separate a metal from its ore using acid and preserving desirable products such as gold.
Explanation:
please make brainiest
Use Table B in your Student Guide to answer the questions about ion concentrations.
A solution with a pH = 13 has approximately how many moles of OH ions per liter?
How many moles of H* would this same solution have per liter?
(Use the decimal form of your answer.)
A different solution with an H+ concentration of 1.0 x 10-4 would have a pH =
Question 1
[tex]\text{pH}=-\log(\text{H}^{+})\\\\13=-\log(\text{H}^{+})\\ \\ \text{[H}^{+}]}=1 \times \boxed{10^{-13} \text{ moles per liter}} \\ \\ \text{[H}^{+}] \times \text{[OH}^{-}] =1 \times 10^{-14} \text{ M}\\\\\text{[OH}^{-}]=\boxed{1 \times 10^{-1} \text{ moles per liter}}[/tex]
Question 2
[tex]\text{pH}=-\log(\text{H}^{+})\\\\\text{pH}=-\log(1.0 \times 10^{-4})=\boxed{4}[/tex]
The properties of an element depend on the electron structure within its atoms. The electrons are arranged in different
orbitals, at different energy levels and sublevels. Match each sublevel to the maximum number of electrons it can
accommodate?
S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
What are orbitals?The probability of finding an electron around the nucleus.
The principal number (n), is the number of the shell, it goes from 1 to 7 and is represented by the letter K, L, M, N, O, P, Q. The maximum number of electrons in the shells are, K = 2, L = 8, M = 18, N = 32, O = 32, P = 18, Q =8.
The secondary number (l) is the subshells, and it goes from 0 to 4 and is represented, in order, for the letter, s, p, d, f. The maximum number of electrons permitted in each subshell is s = 2, p = 6, d = 10, f = 14.
The magnetic number (ml), is represented by orbitals, and it goes from -l to +l, passing by 0. The maximum number of electrons is 2 for each one.
The spin number (ms) refers to the rotation of the electron, and it can be +1/2 or -1/2.
Hence, S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
Learn more about the orbitals here:
https://brainly.com/question/18914648
#SPJ1
A cup of water is warmed from 29 °C to 97 °C. What is the difference between these two temperatures, in kelvins
Answer:
I believe it is 68
Explanation:
to convert Celsius to kelvins you must add it to 273.15 for example 29 + 273.15 is 302.15
im so very sorry if im wrong.
10. Two primary sites for the
polio virus replication?
Answer:
the cytoplasm
protein 3b more commonly called vpg
What is the IUPAC name of the following compounds i. CO₂ ii. NO₂ iii. HNO3 iv. H₂SO4 v. K-Cr₂O vi. [Fe(CN)
Explanation:
I) carbon dioxide
ii) nitrogen dioxide
iii) nitric acid
iv) sulphric acid
v) Potassium dichromate
vi) hexacyanoferrate (III) ion( not sure)
PLEASE HELP CHEMISTRY!!!! Will give brainiest
Show work pls.
2 moles of ZnO are produced if 1 mole of Zn and 2 moles of [tex]O_2[/tex] is required.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
Balanced equation:
[tex]2 Zn + O_2[/tex] → [tex]2 ZnO[/tex]
For 2 moles of Zinc, we need 1 mol of Oxygen to produce 2 moles of Zinc oxide
For 1 mole Zn, we need 2 mol [tex]O_2[/tex] to produce 2 moles ZnO only.
Hence, 2 moles ZnO is produced.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
Help me pleaseeeeeeeee
Answer:
Make life easy for your customers and they are more likely to come back and buy again.
Explanation:
For example, you have to hire the right talent. You don't want somebody on the job that doesn't know how to do anything.
TUTOR Determining Molecular Weight
What is the molecular weight of Cr3(ASO4)2? amu
The molecular weight of Cr3(AsO4)2 is 433.827.
Is molecular weight the same As molar mass?Furthermore, the primary distinction between each is that molar mass gives the mass of a mole of a selected substance. While molecular weight is the mass of a molecule of a particular substance. At an equal time as the definition and devices are splendid for molar mass and molecular weight, the value is the same.
The sum of the atomic hundreds of all atoms in a molecule is based totally on a scale wherein the atomic loads of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively.
Learn more about molecular weight here https://brainly.com/question/26388921
#SPJ10
How many molecules in HNO3?
If data from a clinical trial contains personal information about a study participant, which process should be used to separate identifying information from health information?
A. De-identification
B. Informed consent
C. ALCOA
D. Good documentation practices
If data from a clinical trial contains personal information about a study participant, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct
What is De-identification process ?De-identification is a process of detecting identifiers (e.g., personal names and social security numbers) that directly or indirectly point to a person (or entity) and deleting those identifiers from the data.
De-identification and anonymization are strategies that are used to remove patient identifiers in electronic health record (EHR) data.
Hence, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct.
learn More about health record here ;
https://brainly.com/question/11156017
#SPJ1
PLEASEEEE HELP MEEEEE
Answer:
3.82 x 10²¹ molecules As₂O₃
Explanation:
To find the amount of molecules arsenic (III) oxide (As₂O₃), you need to (1) convert kg to lbs, then (2) convert g As₂O₃ to moles As₂O₃ (via molar mass), and then (3) convert moles to molecules (via Avogadro's number).
1 kilogram = 2.2 lb
Molar Mass (As₂O₃): 2(74.992 g/mol) + 3(15.998 g/mol)
Molar Mass (As₂O₃): 197.978 g/mol
Avogadro's Number:
6.022 x 10²³ molecules = 1 mole
0.0146 g As₂O₃ 1 kg 189 lb
------------------------ x --------------- x ------------------ x ................
1 kg 2.2 lb
1 mole 6.022 x 10²³ molecules
x ------------------ x --------------------------------------- = 3.82 x 10²¹ molecules As₂O₃
197.978 g 1 mole
Choose the correct option.
1. A chain of small chemical units combined to form a large single unit is called ______
a) Polymer
b) Poly
c) Polythene
d) None of the above
2. Polythene and PVC are examples of
a) Bio degradable substance
b) Thermosetting plastics
c) Thermoplastics
d) Rayon
3. Plastics which when moulded once, cannot be softened by heating. Such plastics are called __ a) Polythene
b) Thermoplastics
c) Polyster
d) Thermosetting plastics
4. Polycot is made by mixing two types of fibres namely
a) Silk + Cotton
b) Polythene + cotton
c) Silk + Polyester
d) Polyester + Cotton
5. The 4 R Principle is
a) Reduce, Reuse, Recycle, Recover
b) Remember, reduce, Recycle, Rejoice
c) Repeat, Rejoice, recycle, reduce
d) None of the above
6. _____________ is an example of natural polymer
a) Rayon
b) Cellulose
c) Nylon
d) All of the above
7. Which of the following is Non-biodegradable ?
a) Woolen clothes
b) Plastic bag,
c) Cotton cloth
d) Wood
8. Bakelite and Melamine are examples of
a) Thermosetting plastics
b) Silk
c) Nylon
d) Rayon
9. Fire proof plastic uniform worn by fire fighters has a coating of _____ to make it fire resistant. a) Nylon
b) Rayon
c) Melamine plastic
d) silk
The coating on modern non- stick cookware and electric iron is of
a) Terrycot
b) Rayon
c) Polyester
d) Teflon
What happens as a result of the photoelectric effect? A.light is produced
Answer:
photoelectric effect, phenomenon in which electrically charged particles are released from or within a material when it absorbs electromagnetic radiation. The effect is often defined as the ejection of electrons from a metal plate when light falls on it.
What is the molar concentration of Zn2+ ions in a solution, if the electrode potential value is 59mV less than the standard electrode potential value at 298 K?
Molar concentration of Zn2+ions in a solution is 3.481 mol/lit
The electrode potential value is 59mV
Temperature=298k
What is electrode potential?
It is a force of galvanic cell. basically it is the difference between an electrolyte and electrode.equation formed- Zn → Zn2+ + 2e
from Nernst equation-
E=E cell - 0.059 log [Zn2+]
[zn2+]=3.481 mol/lit
hence, Molar concentration of Zn2+ions in a solution is 3.481 mol/lit
Learn more about electrode potential here:
https://brainly.com/question/15417662
#SPJ10
Fill in the coefficients that will balance the following reaction:
(Note: Use 1 as coefficient where appropriate)
Fe(HCO3)3 + CaO → Fe2O3 + Ca(HCO3)2
Answer:
2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂
Explanation:
The unbalanced equation:
Fe(HCO₃)₃ + CaO ---> Fe₂O₃ + Ca(HCO₃)₂
Reactants: 1 iron, 3 hydrogen, 3 carbon, 10 oxygen, 1 calcium
Products: 2 iron, 2 hydrogen, 2 carbon, 9 oxygen, 1 calcium
As you can see, the reaction is clearly unbalanced because the number of each element on both sides is different. The best way to go about balancing an equation is by trying to first balance an element located in only one molecule on either side. For example, I started trying to balance iron. After balancing iron, I looked to balance other elements that would have been affected by the new coefficient (i.e., hydrogen, carbon).
The balanced equation:
2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂
Reactants: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium
Products: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium
Now, with these coefficients, the quantity of each element on both sides is the same.
Which of the following alkali metal is expected to melt if the room temperature
rise to 30oc (a) Na (b) K (c) Rb (d) Cs
PLEASE HELP ASASP!!!!!!!
Answer:
B
Explanation:
I took the test
determine how many grams of N2 are produced from the reaction of 8.73
g of H2O2 and 5.16
g of N2H4.
Taking into account the reaction stoichiometry, 4.515 grams of N₂ can be produced from 8.73 grams of H₂O₂ and 5.16 grams of N₂H₄.
Reaction stoichiometryIn first place, the balanced reaction is:
N₂H₄ + 2 H₂O₂ → N₂ + 4 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
N₂H₄: 1 mole H₂O₂: 2 molesN₂: 1 mole H₂O: 4 molesThe molar mass of the compounds is:
N₂H₄: 32 g/moleH₂O₂: 34 g/moleN₂: 28 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
N₂H₄: 1 mole ×32 g/mole= 32 gramsH₂O₂: 2 moles ×34 g/mole= 34 gramsN₂: 1 mole ×28 g/mole= 28 gramsH₂O: 4 moles ×18 g/mole= 18 gramsLimiting reagentThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 34 grams of H₂O₂ reacts with 32 grams of N₂H₄, 8.73 grams of H₂O₂ reacts with how much mass of N₂H₄?
[tex]mass of N_{2} H_{4} =\frac{8.73 grams of H_{2} O_{2}x 32 grams of N_{2} H_{4} }{34grams of H_{2} O_{2}}[/tex]
mass of N₂H₄= 8.22 grams
But 8.22 grams of N₂H₄ are not available, 5.16 grams are available. Since you have less mass than you need to react with 8.73 grams of H₂O₂, N₂H₄ will be the limiting reagent.
Mass of N₂ formedConsidering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 32 grams of N₂H₄ form 28 grams of N₂, 5.16 grams of N₂H₄ form how much mass of N₂?
[tex]mass of N_{2} =\frac{5.16 grams of N_{2} H_{4} x28 grams of N_{2}}{32 grams of N_{2} H_{4} }[/tex]
mass of N₂= 4.515 grams
Then, 4.515 grams of N₂ can be produced from 8.73 grams of H₂O₂ and 5.16 grams of N₂H₄.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
Which reaction is endothermic
Answer:
Option 3
Explanation:
Heat is absorbed, so the reaction is endothermic.
When 50.0 g of calcium carbonate are reacted with sufficient hydrochloric acid, how many grams of calcium chloride will be produced
Answer:
55.5g of calcium chloride is produced in the reaction.
Explanation:
To calculate the amount of calcium chloride.
The reaction of calcium carbonate with hydrochloride acid gives calcium chloride
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
Mass of calcium carbonate (CaCO₃)= 50.0g
Molecular mass of CaCO₃ = Ca + C + O₃
= 40+ 12 + 3(16) = 100g
No of moles of calcium carbonate CaCO₃ = given mass / molecular mass
= 50g/ 100
= 0.5 moles
Molecular mass of calcium chloride = 40+ 2(35.5)=(40+71.0)= 111g/mol
1 mole of calcium carbonate gives = 1 mole of calcium chloride
0.5 moles of calcium carbonate gives= 0.5 × 111g/mole
= 55.5g
To learn more about moles, grams and molecular mass, refer to-
https://brainly.com/question/11893320
#SPJ10
