Help pls!!!!!!!!!!!!!!!!!!!!!!!!!

Answer:

[He]2[tex]s^{2}[/tex]3[tex]p^{1}[/tex]

Explanation:

The electron configuration for Boron is 1[tex]s^{2}[/tex]2[tex]s^{2}[/tex]3[tex]p^{1}[/tex], but you can also write it as the noble gas configuration, which is [He]2[tex]s^{2}[/tex]3[tex]p^{1}[/tex]

Note that helium has the configuration of 1[tex]s^{2}[/tex], so we instead of writing it, we write [He]. This can be useful when writing the configurations of elements from the later periods as it saves space.

Answer:

B

Explanation:

B is a personal factor of resilience

Answer:B

Explanation:

Maybe

Answer:B is correct

Explanation:

Answer:

Explanation:

Calcium is Ca

Carbon is C

Chlorine is Cl

Answer:

[tex]1.05x10^{24}atoms[/tex]

Explanation:

Hello!

In this case, according to the definition of the Avogadro's number, it is possible to realize that one molecule of CO2 contains 3 moles of atoms, one of carbon and two of oxygen, thus, we have:

[tex]0.580molCO_2*\frac{3mol\ atoms}{1molCO_2} =1.74mol\ atoms[/tex]

Then, we use the Avogadro's number to obtain:

[tex]1.74mol\ atoms*\frac{6.022x10^{23}atoms}{1mol\ atoms} \\\\1.05x10^{24}atoms[/tex]

Best regards!

Answer:

d hope it's right hope this helps

Answer:

Energy exists in a field.

Explanation:

Electrical field, magnetic field, and gravitational field.

A and B are wrong otherwise the law of conservation of energy would be violated

Answer:

temperature of the reaction vessel

Explanation:

temperature of the reaction vessel

The value of the rate constant for a gas phase chemical reaction can be changed by increasing the: A. temperature of the reaction vessel.

In Chemistry, rate constant is typically used with rate law to tell the reaction rate or rate of a chemical reaction that is affected by activation energy.

Mathematically, the rate law is given by this formula:

[tex]R = k[A]^x[B]^y[/tex]

Where:

Generally, the value of the rate constant for a gas phase chemical reaction can be changed by increasing the temperature of the vessel (container) that is used in conducting the chemical reaction.

Read more on rate constant here: brainly.com/question/24749252

Answer:

do you have names or pictures?

Explanation:

Answer:

A value that quantifies the distance traveled by a substance relative to the distance traveled by the solvent- Retention factor

The substance to which the sample is bound at the start of an experiment- stationary phase

The substance that carries the components of a mixture- mobile phase

Explanation:

The retention is defined as a value that quantifies the distance traveled by a substance relative to the distance traveled by the solvent. It shows us how effective a solvent is at separating a mixture.

The stationary phase is the the substance to which the sample is bound at the start of an experiment. The solvent pick up the substance to be analyzed from this stationary phase. The different components of the mixture are found to move up the stationary phase at different speeds, causing them to eventually  separate from each other.

The mobile phase is the substance that carries the components of a mixture during chromatography.

Answer:

A. 2 He

Explanation:

The notation of an alpha particle is depicted as:

                     ₂He

An alpha particles is a nucleus of 2 protons and 2 neutrons. So it is actually a Helium cation.

Alpha particles are monoenergetic and they mostly have discrete energy.

So, the mass number of the particle is 4 and atomic number is 2

Strong Acid: dissolves and dissociates 100% to produce protons (H+) 1. seven strong acids: HCl, HBr, HI, HNO3, H2SO4, HClO4, & HClO3 2. ... Weak Acid: dissolves but less than 100% dissociates to produce protons (H+) 1.

Answer:

law of multiple proportions

Explanation:

The law of multiple proportions states that, if two elements A and B, combine to form more than one chemical compound. Then the various masses of one element A, which combine separately with a fixed mass of element B are in  simple multiple ratio.

We can see that the ratio of oxygen that combines with carbon in the two compounds( A and B) is 1:2. This demonstrates the law of multiple proportions.

The substances A and B must be CO and CO2 respectively.

The question is incomplete, the complete question is;

In a laboratory experiment, students synthesized a new compound and found that when 12.23 grams of the compound were dissolved to make 228.1 mL of a benzene solution, the osmotic pressure generated was 4.55 atm at 298 K. The compound was also found to be non-volatile and a non-electrolyte. What is the molecular weight they determined for this compound?

Answer:

287.76 g/mol

Explanation:

From;

π = M R T

M = molarity

R= gas constant

T = temperature

number of moles = π * volume/RT

number of moles = 4.55 * 228.1/1000/0.082 * 298

number of moles = 1.037855/24.436

number of moles = 0.0425 moles

Molar mass = mass/number of moles

Molar mass = 12.23 grams/0.0425 moles

Molar mass = 287.76 g/mol

Answer:

NaBH₄

Explanation:

First, we need to write the chemical formula of all the compounds:

Benzil: C₁₄H₁₀O₂

Sodium Borhydride: C₁₄H₁₀O₂

Hydrobenzoin: C₁₄H₁₄O₂

Now, let's write the reaction that is taking place and write all the products:

C₁₄H₁₀O₂ + 2NaBH₄ + 2H₂O -----------> C₁₄H₁₄O₂ + 2BH₃ + 2NaOH

We can see that the reaction is already balanced, so we don't need to do anything else.

The question of this exercise is to determine the limiting reagent of the reaction, in other words, the reagent that controls the reaction and produces the 2.22 g of the hydrobenzoin. And to know this we need to see the mole ratio in both reactants, and compare them to the given moles (That can be obtained with the given masses and MW)

According to the above reaction, we have a mole ratio of 1:2, so, let's calculate the moles of benzil and the borohydride, and see which of them is the limiting reactant:

moles C₁₄H₁₀O₂ = 2.56 / 210.23 = 0.0122 moles

moles NaBH₄ = 0.38 / 37.83 = 0.01 moles

moles  C₁₄H₁₄O₂ = 2.22 / 214.26 = 0.0103 moles

We have the moles of every species, now, let's see the mole ratio

If 1 mole of C₁₄H₁₀O₂ -----------> 2 moles of NaBH₄

Then 0.0122 moles C₁₄H₁₀O₂ ----------> X moles of NaBH₄

Solving for X:

X = 0.0122 * 2 / 1 = 0.0244 moles of NaBH₄ are required.

However, we only have 0.01 moles of NaBH₄, and we need so much more of this to completely react with the moles of the benzil. Therefore we can safely assume that the limiting reagent is the NaBH₄

Another data that we can use for this, is the fact the produced moles were 0.0103, and this value is nearest to the moles of NaBH₄ rather than the moles of the benzil.

Hope this helps

Answer:

78

Explanation:

You have 100%, you take 22% and get 78%

Answer:

I cant see it that well but id be happy to help if u post a clearer picture!

Explanation:

Answer:

D. Deciduous Forest.

Explanation:

Answer:

Moles to grams carbon dioxide

1 mole is equal to 1 moles Carbon Dioxide, or 44.0095 grams.

Explanation:

Moles to grams carbon dioxide

1 mole is equal to 1 moles Carbon Dioxide, or 44.0095 grams.

Answer:

D a compound

Explanation:

Answer: [tex]H_2O_2\rightarrow H_2+O_2[/tex]

Explanation:

Decomposition is a type of chemical reaction in which one reactant gives two or more than two products.

According to law of conservation of mass, mass can neither be created nor be destroyed. Thus the number of atoms of each element must be same on reactant and product side. Thus chemical equations are balanced.

The balanced equation for the decomposition reaction  of hydrogen peroxide is:

[tex]H_2O_2\rightarrow H_2+O_2[/tex]

Decomposition is a type of chemical reaction in which a chemical breaks into two or more molecules or atoms. One reactant breaks into two products which can be shown as:

                                         XY----->X + Y

The decomposition reaction of hydrogen peroxide can be written as:

                                              [tex]H_{2}O_{2} = H_{2} + O_{2}[/tex]

Therefore, the balanced chemical reaction of decomposition of hydrogen peroxide will be:

                                             [tex]H_{2}O_{2} = H_{2} + O_{2}[/tex]

To learn more about decomposition reaction follow the given link:

https://brainly.com/question/8009068

Answer:

1-6

3 1 3 3 2 2

Explanation:

Answer:

The molar density of any ideal gas at STP is:

1 mol / 22.4 L = 0.04464 mol / L

The molar mass of F2 is: 2(19) = 38 g/mol

0.04464 mol / L * (38 g / mol) = 1.70 g/L

Explanation:

Answer:

0.491 mol NaCl

Explanation:

Convert from grams to moles using the molar mass of NaCl:

28.7 g NaCl x 1 mol NaCl/58.44 g NaCl = 0.491 mol NaCl

The molar mass (58.44 g) can be found from adding the molar masses of the individual elements (Na and Cl); the g NaCl will cancel out (dimensional analysis), leaving you with mol NaCl.

Answer:

Explanation:

The end product of Photosynthesis is glucose that is used in cellular respiration to make ATP. The glucose is then turned back into carbon dioxide, which is used in photosynthesis. While water is broken down to form oxygen during photosynthesis, in cellular respiration oxygen is combined with hydrogen to form water.

Answer:The correct names for the structure are:

--> 1. 1-bromo-3-chlorobenzene.

--> 3. meta-bromochlorobenzene.

--> 6. m-bromochlorobenzene.

Explanation:

Benzene is the simplest member of the aromatic hydrocarbons. It has a ring structure consisting of six carbon and six hydrogen atoms. This equally means that a benzene can have up to six substituents. One of the chemical properties is that benzene and other members of its series undergo substitution reaction whereby one or more of its six hydrogen atoms is replaced by monoatomic reagents.

Disubstituted benzene consists of two substituents which are described based on either numerical locants or specific words for the three possible forms.

The numerical locant method are used the same naming substitutes of other hydrocarbons. From the question, the numerical locant method was derived through using the following steps:

--> the functional group is benzene

--> there are two substituents which includes bromine( written as bromo) and chlorine ( written as chloro)

--> while placing the number, it's done alphabetically ('1-bromo' comes before '3-chloro') in a clockwise manner. This is to give chorine the lowest locant number.

The second naming method for a disubstituted benzene is the the ortho-, meta-, para- (or their singel letter equivalent) nomenclature method. This is only used for benzene structures.

--> ortho or O : this is used when the substituents are close to each other in the benzene ring.

--> meta or (m) : This is used when the substituents are separated by one carbon in the benzene ring.

--> para or (p): This is used when the substituents are across each other in the benzene ring

From the question, the bromine substituent is separated from the chlorine by one carbon atom, therefore it's meta-bromochlorobenzene or m-bromochlorobenzene.

Answer:

Explanation:

Chromium nitrate Cr( NO₃ )₂

Chromium hydroxide Cr( OH)₃

Chromium oxide ( Cr₂O₃ )

1 mole of chromium nitrate will form 1 mole of chromium hydroxide

1 mole of chromium hydroxide will form one mole of chromium oxide .

Moles of chromium nitrate in 56 mL of .6 M solution

= .056 x .6 = .336 moles

.336 moles of chromium nitrate will produce .336 moles of chromium hydroxide and .336 moles of chromium hydroxide will produce .336 moles of chromium oxide .

So chromium oxide produced = .336 moles

Molecular weight of chromium oxide = 152

.336 moles of chromium oxide is equal to

.336 x 152 grams of chromium oxide

= 51.07 grams .

Answer:

80grams

Explanation:

RAM of O=16

molar mass of O2= 16×2=32g/mol

mass= mole × molar mass

= 2.5×32= 80g

Answer:

I guess you mean by non element example. Non element examples have more than one elements. Carbon dioxide is a non element example since caebon dioxide has 2 oxygen atoms + 1 carbon atom = carbon dioxide.

I think catalyst is also a non element example because catalyst is inorganic which means that it is not a living thing. Since catalyst is in brass and brass is a non element example, I think catalyst is also a non element example.

Hope that helps, thank you !!