help!!! Which of the following statements are examples of negative social impacts of some technologies? (Choose all that apply)

a.Improvements in communication technology allow people to share new ideas and scientific knowledge.

b.People may spend so much time learning and using new technology, that it gets in the way of doing tasks.

c.The burning of fossil fuels releases compounds into the air that can be harmful to breathe.

d.Communication technology can cause people to undervalue face-to-face communication.

e.People can become unnecessarily dependent on technology to complete tasks they used to do themselves.

Answers

Answer 1

c.The burning of fossil fuels releases compounds into the air that can be harmful to breathe.

d.Communication technology can cause people to undervalue face-to-face communication.

e.People can become unnecessarily dependent on technology to complete tasks they used to do themselves.


Related Questions

What are Newton's 1st 2nd and 3rd laws formulas?.

Answers

Three formulas of newton's law of motion are:- a) v = u + at, b) S = ut +0.5at² c) v² = u² + 2as

Newton's first law of motion defines the relation between final velocity(v) of an object after some time(t), if the initial velocity of the object is u and acceleration is a.

v = u + at

Newton's second law of motion is used to determine the distance(S) travelled by an object in accelerated motion for time(t), having an initial velocity u.

S = ut +0.5at²

Newton's third law gives the relationship between, final, initial velocities, acceleration(a), and the distance(s) travelled by the object.

v² = u² + 2as

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

how many days did the trekkers predict it would take them to walk from phakding to everest base camp

Answers

It will take about 12 days for the trekkers predict to walk from phakding to Everest base camp.

What is Trekking?

This is referred to as a form of movement which consists of walking for several days or several weeks and being entirely or partially self-sufficient.

The standard Everest Base Camp Trek is 130km round trip and is usually divided into 12 days which includes time and space for acclimatization to the region and then we have 8 days to get to Everest Base Camp and 4 days to get back which is therefore the reason why ythe predicted days will be 12 and is the correct choice.

Read more about Trekking here https://brainly.com/question/29529058

#SPJ1

What is angular momentum Mcq?.

Answers

The angular momentum of a particle rotating around an axis is defined as the moment of the particle's linear momentum around that axis.

What is angular momentum?

Angular momentum is the rotational equivalent of linear momentum in physics. It is an important physical quantity because it is a conserved quantity—in a closed system, the total angular momentum remains constant. Both the direction and magnitude of angular momentum are conserved. The property of any rotating object given by moment of inertia times angular velocity is defined as angular momentum. It is the property of a rotating body determined by the product of the rotating object's moment of inertia and angular velocity.
Here,

The moment of a particle's linear momentum about an axis is defined as its angular momentum. The product of linear momentum and the perpendicular distance of its line of action from the axis of rotation is used to calculate it.

To know more about angular momentum,

https://brainly.com/question/29716949

#SPJ4

How much is 1 newton?.

Answers

One newton is equal to 1 kilogram meter per second squared. In plain English, 1 newton of force is the force required to accelerate an object with a mass of 1 kilogram 1 meter per second per second. Q.

What is time travel and is it possible?

Answers

Answer:

According to NASA, time travel is possible, just not in the way you might expect. Albert Einstein's theory of relativity says time and motion are relative to each other, and nothing can go faster than the speed of light, which is 186,000 miles per second. Time travel happens through what's called “time dilation.

Explanation:

brainiest

1000 joules of energy are put into a pulley system, and 400 joules come out. What does the law of conservation of energy imply about the lost energy?(1 point).

Answers

The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another.

What is energy?

Energy is the ability to do work. It is the capacity to cause change or to make things happen. Energy is present in many forms, such as thermal energy, radiant energy, electrical energy, chemical energy, mechanical energy, and nuclear energy. Energy is stored in different forms, such as potential energy, kinetic energy, and elastic energy.

The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another. Therefore, the 600 joules of energy that were lost in the pulley system must have been converted into a different form of energy, such as heat or sound.

To learn more about energy

https://brainly.com/question/13881533

#SPJ4

What is an example of latency?.

Answers

Some common examples of latency are while playing games, audio processing.

Latency is the delay or lag time between when a request is made and when a response is received. An example of latency can occur in network communications, where data packets are sent from one device to another and there is a delay between when a packet is sent and when it is received. Another example of latency can occur in computer systems, where there is a delay between when a command is given and when the computer completes the task. An example of latency can occur while playing online games, where there is a delay between when a player takes an action and when that action is reflected on other player's screens, this is known as "ping". Another example of latency can be seen in audio processing, where there is a delay between the time a sound is made and when it is heard by the listener.

To know more about Latency click here:

https://brainly.com/question/28234702#

#SPJ4

Write the equation for work. Then insert the known quantities

Answers

Work can be calculated with the equation given as Work = Force × Distance

What is work?

When a force acts on an object to cause a displacement, it was said that work was taking place. Three variables must be known in order to calculate the work when a force causes an object to be displaced.

Work = Force × Distance is the formula for calculating work. The joule (J), also known as the Newton meter (N m), is the SI unit for work. When an object is moved over a distance of 1 m with 1 N of force, one joule is equal to the amount of work that is accomplished.

To determine the amount of work, three quantities must be known. The force, the displacement, and the angle between the force and the displacement are the three variables.

Learn more about work on;

https://brainly.com/question/28199162

#SPJ1

Samples g and h were selected from the same population of quantitative data and the mean of each sample was determined. The mean of sample g is equal to the mean of the population.

Answers

The mean of the sample is point estimator of mean of the population from which samples are drawn randomly.

Correct option: II and III is correct choice.

What is the relationship between population mean and sample mean?

Samples G and H are selected from the same population of quantitative data. Mean of G is equal to the mean of the population. We cannot work on population in most of the cases thus we draw samples and work on sample to predict the properties of population. Sample mean is point estimator of population mean, and is used to predict the population mean.

Since both G and H are samples drawn from same population, thus, they both are point estimators of the population mean. It is not necessary that both G and H must be same. They can be same and cannot be same.

Thus, Option: II and III is correct choice

To know more about mean of the sample refer to:

brainly.com/question/20747890

#SPJ4

The complete question is as follows:

Samples G and H were selected from the same population of quantitative data and the mean of each sample was determined. The mean of sample G is equal to the mean of the population. Which of the following statements must be true?

I. The mean of sample H must also be equal to the population mean.

II. The mean of sample G, TG, is a point estimator for the mean of the population.

III. The mean of sample H, my, is a point estimator for the mean of the population.

A. I only

B. II only

С. III only

D. I and II

E. II and III

What is the name for the spontaneous process of transport or dispersing of molecules until there is a uniform concentration of molecules throughout a solution?.

Answers

The process by which molecules spontaneously move through a solution or disperse until they are evenly distributed throughout is known as diffusion.

Diffusion is the movement of molecules (either solution- or gas-borne particles) from a region of high concentration to a region of lower concentration, or down a gradient in concentration. Diffusion over the cell surface membrane allows some chemicals to enter and exit cells.

The term "facilitated diffusion" refers to a type of passive transport. It happens when chemicals like glucose or amino acids shift from a state of high concentration to a state of low concentration with the help of carrier proteins or membrane pores.

Learn more about molecules Visit: brainly.com/question/26044300

#SPJ4

A basic truth of inheritance that had been known well before darwin's time was that.

Answers

A basic truth of inheritance that had been known well before Darwin's time was that: Offspring frequently resemble their parents AND they inherit genes from their parents.

What is inheritance?

Assets left to a person's heirs after their death are referred to as inheritance. Cash, investments like stocks or bonds, and other things like jewellery, cars, works of art, antiques, and real estate can all be included in an inheritance. Evolutionary transformation requires genetic inheritance. It explains how genes are transmitted down across generations. Therefore, it may initially appear odd that life history research rarely takes into account genetic inheritance. The most widespread types of inheritance include autosomal dominant, autosomal recessive, X-linked dominant, X-linked recessive, multifactorial, and mitochondrial inheritance. Traits that are determined by the genes found on the autosomes are referred to as "autosomal."

To know more about inheritance refer to:

https://brainly.com/question/15078897

#SPJ4

The complete question is as follows:

A basic truth of inheritance that had been known well before Darwin's time was that Select one:

a. Offspring inherit genes from their parents.

b. selective breeding improves domesticated plants and animals

c. Offspring frequently resemble their parents AND they inherit genes from their parents

d, Offspring frequently resemble their parents.

What is the unit of the distance Mcq?.

Answers

According to the International System of Units, the SI unit of distance is a metre. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities such as volume, area, acceleration, and speed are formed.

What is distance?

The magnitude or size of displacement between two positions is defined as distance. It is important to note that the distance between two points is not the same as the distance traveled between them. The total length of the path traveled between two points is referred to as the distance traveled. The total length of an object's actual path is referred to as distance. The displacement of an object between two points is the straight line (shortest) distance between those points, directed from one position to the other. The SI unit for measuring distance and displacement is the meter (m).

Here,

According to the International System of Units, a metre is the SI unit of distance. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities, such as volume, area, acceleration, and speed, can be formed.

To know more about distance,

https://brainly.com/question/11667907

#SPJ4

What is the full form of SI units Class 6?.

Answers

The International System of Units (SI unit) is a scientific method of expressing the magnitudes or quantities of significant natural phenomena. SI units include the kilogram, second, ampere, and kelvin, among others.

What is SI units?

The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system. The SI is a coherent system of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), the kelvin (K, thermodynamic temperature), the mole (mol, substance amount), and the candela (cd, luminous intensity).

Here,

The International System of Units (SI unit) is a scientific system for expressing the magnitudes or quantities of major natural phenomena. SI units include the kilogram, second, ampere, kelvin, and so on.

To know more about SI units,

https://brainly.com/question/12750330

#SPJ4

How do you calculate torque from inertia?.

Answers

Torque τ can be calculated using moment of inertia I and angular acceleration α.

Mathematically, τ = I α

Angular acceleration of a body is due to rotational motion. Moment of inertia is the tendency of the body to restrain the angular acceleration of that body. Torque is an analogous quantity to work and energy.

The steps to calculate torque from moment of inertia are given as, determine the known values such as the angular acceleration and the moment of inertia for the object in question, determine what unknown value we are trying to find, determine which equations we will need to solve for the unknown value and rearrange it if necessary, calculate the desired unknown value.

To know more about torque:

https://brainly.com/question/30187149

#SPJ4

what will be the acceleration, if the vehicle starte form rest and the velocity reaches 30m/s and after 6 sec

Answers

Explanation:

Acc=change in velocity/time

a=30-0 / 6

a =30/6

a = 5m/s^2

two identical metal spheres a and b are in contact. both are initially neutral. 1.0×1012 electrons are added to sphere a, then the two spheres are separated. t or f

Answers

Two identical metal spheres a and b are in contact, both are initially neutral. When 1.0×1012 electrons are added to sphere a, then the two spheres are separated : false

What is Charge?

The physical property of matter that causes it to experience a force when placed in an electromagnetic field is called as electric charge.

When 1.0x1012 electrons are added to sphere a, then that sphere becomes negatively charged. When two spheres are separated,  electrons will redistribute themselves to maintain equilibrium. This results in both spheres having net charge. Some of the electrons from sphere a will move to sphere b, making it negatively charged.

So, when 1.0×1012 electrons are added to sphere a, then the two spheres are separated is false.

To know more about charge, refer

https://brainly.com/question/25922783

#SPJ4

What factors does latency depend on?.

Answers

Latency has four primary causes: The main factor causing network slowness is data processing. In order to determine a data packet's precise destination at this time, the header must be studied.

Select the best route, and then add it to the relevant link's transmission queue. Unstructured data must be converted into machine-readable information through a process known as data processing. So acquiring, recording, organizing, storing, and adapting or modifying the data constitute the process of converting raw data into usable information. Latency has four primary causes: The main factor causing network slowness is data processing. All actions taken to convert useless data into information are categorized as data processing. Informational outputs include things like reports from analytics, visualizations, and well-organized data collections.

Learn more about data processing here

https://brainly.com/question/27505981

#SPJ4

The complete question is -

What factors does network latency depend on?.

What is the efficiency of a light bulb if it produces 30j of light energy, with an input of 120j of electrical energy?

Answers

The efficiency of this light bulb is 25% .

How do you calculate the efficiency of a light bulb?Utilizing the following formula, efficiency may be represented as a ratio: output input. The total quantity of beneficial work accomplished, excluding waste and spoilage, is known as output or work output. Efficiency may also be expressed as a percentage by dividing the ratio by 100.To represent the result as a percentage, divide the output by the input and then multiply by 100. Although both work and energy are measured in terms of the Joule, the calculator above has a space for a different unit. Make sure the energy and labour units are equivalent.Efficiency is essentially a measurement of the amount of labour or energy that may be saved throughout a process. In other words, it's similar to comparing the energy intake and output in any particular system.

Given data :

output = 30j

Input = 120j

Efficiency  = output / input x 100

  = 30 / 120 x 100

  = 25%

Learn more about efficiency of a light bulb refer to :

https://brainly.com/question/10300122

#SPJ1

Uppoe a rocket-propelled motorcycle i fired from ret horizontally acro a canyon 1. 00km wide. What minimum contant acceleration in the x-direction mut be provided by the engine o the cycle croe afely if the oppoite ide i 0. 750 km lower than the tarting point?

Answers

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity).

Rocket Motorcycle Canyon Crossing

The motorcycle must have a minimum constant acceleration in the x-direction of 9.8 m/s² in order to safely cross the canyon. This acceleration is necessary to counteract the force of gravity and ensure that the motorcycle and rider can clear the distance of the canyon and land on the opposite side at a point that is 0.750 km higher than the starting point. The motorcycle is assumed to be fired horizontally from the starting point, and the rider must be able to maintain balance throughout the crossing.

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity). This is assuming that the motorcycle is fired horizontally from the starting point and that the rider is able to maintain balance throughout the crossing.

Learn more about Rocket Motorcycle Canyon Crossing here:

https://brainly.com/question/13016913

#SPJ4

111. When a meteorite strikes Earth, the meteorite or its pieces remain on or near Earth's surface. Suppose a giant object from space enters the solar system and collides head-on with Earth as Earth travels in its path around the Sun.

If the object's speed is twice Earth's speed, how massive must it be to reduce Earth's orbital velocity by even a hundredth of a percent? Annotate your calculation with a description of your approach.​

Answers

Answer:

Explanation:

To calculate the mass of an object that would reduce Earth's orbital velocity by even a hundredth of a percent, we need to use the conservation of momentum principle. According to this principle, the total momentum of a system remains constant if no external forces act on it.

In this scenario, we can consider the Earth and the object as a closed system. The initial momentum of the system is Earth's momentum, and the final momentum is Earth's momentum after the collision.

Let's assume the mass of the Earth is M_E and the initial velocity of Earth is V_E. After the collision with the object, the final velocity of Earth is V_E' . The mass of the object is M_O, and its velocity is V_O (twice Earth's velocity)

The conservation of momentum principle states that:

M_E * V_E = M_E * V_E' + M_O * V_O

To reduce Earth's orbital velocity by even a hundredth of a percent, we can assume that V_E' = V_E - (0.0001 * V_E)

Therefore,

M_E * V_E = M_E * (V_E - (0.0001 * V_E)) + M_O * (2 * V_E)

Rearranging this equation we can find the mass of the object M_O

M_O = M_E * (V_E / (2 * V_E - 0.0001 * V_E))

To get the exact mass of the object, we need to know the mass of the Earth and the velocity of Earth, which are not provided in the question. However, this calculation will give an approximate mass that the object would need to have in order to reduce Earth's orbital velocity by even a hundredth of a percent.

What is momentum and write its formula?.

Answers

Momentum is a moving body's quantity of motion, measured as the product of its mass and velocity. It is calculated as mass *velocity.

What is momentum?

Momentum is defined as the quantity of motion of a body. It is measured by "mass velocity," since momentum is affected by velocity and the direction of the body's motion. Because velocity is a vector and mass is a scalar variable, momentum is a vector quantity. Momentum is defined as mass multiplied by velocity. The definition of momentum is "mass moving." Because all objects have mass, when they move, they have momentum - their mass is in motion. Momentum is a moving body's quantity of motion, measured as the product of its mass and velocity.

Here,

Momentum is a moving body's amount of motion, calculated as the product of its mass and velocity. It is calculated as mass *velocity.

To know more about momentum,

https://brainly.com/question/22418297

#SPJ4

How do you find velocity at time t 0?.

Answers

When an object doesn't move over time, its velocity is zero. When there is no displacement of the item, the velocity of the object is 0. Between two different time intervals, the object's position is unchanged.

By dividing the entire distance traveled by the time it took the object to go a certain distance, you may calculate the object's initial velocity. V, d, and t are the three variables that make up the equation V = d/t.

Angular acceleration at time zero is -10 rad/s2, and the angular velocity is 27.5 rad/s. How many complete rotations does the disc make before coming to a stop. The circular path is always parallel to the linear velocity. The tangential speed determines magnitude.

Learn more about velocity Visit: brainly.com/question/29523095

#SPJ4

Correct Question:

How do you find velocity at time t=0?.

How does that affect how the sun and moon appear as seen from Earth? A. The sun appears to be four times the size of the moon. B. The sun and the moon appear to be nearly the same size. C. The full moon appears to be twice as large as the sun. D. The sun appears to be 400 times the size of the moon.

Answers

B. The sun and the moon appear to be nearly the same size.

The Sun and the Moon appear to be nearly the same size from the Earth's perspective because the Moon is about 400 times closer to the Earth than the Sun, and the Sun is about 400 times larger than the Moon. This means that the Sun and the Moon appear to have the same size in the sky, which makes possible the phenomenon of a solar eclipse, where the Moon completely covers the Sun. Even though the sun is much larger than the Moon, but its distant location makes it appear small in the sky while the Moon is much smaller but it is much closer to us, that's why they appear to be the same size.

Why is reducing latency important?.

Answers

Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop interacting with a platform due to problems with high latency and time delays.

then switch permanently to a different programme.

One of the biggest causes of user service abandonment is poor latency. To put it clearly, excessive latency can result in enormous losses in revenue and a declining user base. One of the most crucial elements in the success of your application is eliminating latency.

Numerous physical obstacles, such as internet service, internet speed, or particular IP networks, might have an impact on latency. Businesses and IT specialists have consistently developed and implemented methods to enhance network speeds and the overall user experience. This has often taken the shape of data distribution, expanding the global data storage capacity, and enhancing network connectivity.

Learn more about Latency here:

https://brainly.com/question/14264521

#SPJ4

What is the formula and unit of work done?.

Answers

Answer:

Work Done = Force x Displacement

Explanation:

The formula for work done is defined as the product of the magnitude of the force applied on an object and the displacement of the object in the direction of the force. Mathematically, this is expressed as:Work Done = Force x DisplacementThe unit of work done is the joule (J). This is derived from the SI unit for force (Newton, N) and the SI unit for displacement (meters, m). The joule is defined as the amount of energy transferred or converted when a force of one newton moves an object one meter in the direction of the applied force.Work is a measure of energy being transferred or converted from one form to another. This transfer of energy is accomplished by applying a force onto an object over a distance. Work done is measured in joules, which is the amount of energy transferred or converted in the process. It is important to note that for work to be done, the force must be applied in the direction of the displacement. For example, if you push a box across the floor, the force you apply is in the direction of the displacement. This means that work is being done on the box. However, if you push the box up against a wall, the force you apply is perpendicular to the displacement. In this case, work is not done on the box because the force is not applied in the direction of the displacement.In addition, it is important to remember that work done is equal to the product of the force applied and the displacement of the object in the direction of the force. This means that if the force applied is doubled, the work done will also be doubled. Similarly, if the displacement of the object is doubled, the work done will be doubleIn conclusion, the formula for work done is Force x Displacement, and the unit of work done is the joule. Work is a measure of energy being transferred or converted from one form to another, and is equal to the product of the magnitude of the force applied and the displacement of the object in the direction of the force. In order for work to be done, the force must be applied in the direction of the displacement.

Consider a projectile motion formed by inclined throw then answer the following. b) For which of the angle it takes more time in air?​

Answers

Answer:Projectile motion is the motion of an object thrown (projected) into the air. After the initial force that launches the object, it only experiences the force of gravity. The object is called a projectile, and its path is called its trajectory. As an object travels through the air, it encounters a frictional force that slows its motion called air resistance. Air resistance does significantly alter trajectory motion, but due to the difficulty in calculation, it is ignored in introductory physics.

Explanation:

B)

Assume that you have a meter stick balanced on a pivot, and pile of additional masses that you can hang on the meter stick. What is the minimum number of additional masses that you need to hang from the meter stick in order to determine the mass of the meter stick itself?.

Answers

You will not need any mass to determine the mass of the stick to determine the mass of the meter stick itself.

What is center of mass of a system of particles?

A place at which the entire mass of the object or all of the masses of a system of particles appears to be concentrated is considered the center of mass of a body or system of particles.

Only Newton's second law, that also states that an item's mass is equal to its force divided by its mass, may be used to calculate its mass of the object, such as the stick. It is clear that we are unable to determine both force and acceleration values of the stick depicted in the question above. However, by adding more masses on the stick, it is also difficult to determine its mass.

To know more about meter stick refer to:

https://brainly.com/question/13563397

#SPJ4

carlos is deciding if he will climb a mountain in a zigzag path or straight up the side, starting from rest and ending at rest. neglecting friction and disregarding other factors, will his potential and kinetic energy consumption be the same for both paths?

Answers

No, his potential and kinetic energy consumption will not be the same for both paths.

What is kinetic energy?

Kinetic energy is a form of energy associated with the movement of objects or particles. It is the energy of an object in motion, and is equal to the work done to accelerate the object from an initial state of rest. Kinetic energy is a scalar quantity, meaning it has magnitude but no direction.

No, his potential and kinetic energy consumption will not be the same for both paths. Climbing a mountain in a zigzag path will require more energy than climbing straight up the side, because he will have to change his direction and velocity, requiring more energy for acceleration and deceleration. Furthermore, it will take longer to reach his destination, resulting in more energy expended.

To learn more about kinetic energy

https://brainly.com/question/20658056

#SPJ4

The board is subjected to a tensile force of 200 lb. determine the average normal and average shear stress in the wood fibers, which are oriented along plane a–a at 20° with the axis of the board.

Answers

The normal stress is 2.92 psi and shear strength is 8.034 psi.

It is necessary to determine the normal stress and shear stress for plane a-a , which is in relation to the direction of the force at an angle 20°. We apply the conditions of equilibrium:

∑[tex]F_{x} =0[/tex]∑[tex]F_{y} = 0[/tex]

Using these equations we get :

∑[tex]F_{x} = 0[/tex] ⇒ V - 200. cos20° = 0

             ⇒ V = 187.938 lb

∑[tex]F_{y} = 0[/tex] ⇒ N - 200. sin20° = 0

             ⇒ N = 68.40 lb

We calculate the surface area of the cross section:

A = b.d/ sin20

   = 2*4/sin20

   = 23.39

The shear strength is calculated by formula:

Normal stress = N/A , where

N = Force acting on cross section

A = Surface area of the cross section

i.e. Normal stress = 68.40/23.39 = 2.92 psi

The shear strength is calculated by formula:

Shear strength = V/A, where

V = Shear force acting on cross section

A = Surface area of the cross section

i.e. Shear strength = 187.93/23.39 = 8.034 psi

So, the normal stress is 2.92 psi and shear strength is 8.034 psi.

To know more about stress visit:

https://brainly.com/question/13288741

#SPJ4

the student explains how conduction is the charging by contact so the uncharged object takes select one type of charge; while induction is the charging without contact so the uncharged object takes select one type of charge.

Answers

Conduction is the charging-by-contact method of charging where the uncharged object takes C: the same type of charge; while induction is the charging-without-contact method of charging where the uncharged object takes A: the opposite charge.

Charging by conduction means to charge an uncharged object by placing it in contact with a charged object. Charging by induction means charging an uncharged object by bringing it close to a charged object without allowing the two objects to come into contact. In conduction, any new currents produced follow the original currents. On contrary, in induction, the new currents induced opposing changes in the original currents.

"

Complete question:

the student explains how conduction is the charging by contact so the uncharged object takes select one type of charge; while induction is the charging without contact so the uncharged object takes select one type of charge.

A-  the opposite charge

B -  the neutral charge

C - the same type of charge

D - No charge

"

You can learn more about charging by conduction and induction at

https://brainly.com/question/16072774

#SPJ4

Other Questions
please review the video and describe what you learned about freedom of speech during times of war and in general? schenck versus the united states The essential element of geography called environment and society can best be described as the study of __________.A.why people create cultures in different areasB.how people affect the natural world and how it affects themC.where things are located in relation to each other spatiallyD.how people group places together into regions researchers investigating the unconscious mind investigate a phenomenon of divided conscious ness in which a person can focus on one voice and tune out other stimuli, yet still be able to notice important infor known as the A 3-D movie is shot with two camera to stimulate each eye seeing something slightly different. This is done to enhance our sense depth perception by using Create a function that accepts 3 integer values and returns their sum. However, if an integer value is evenly divisible by 3, then it does not count towards the sum. Return zero if all numbers are evenly divisible by 3. Hint: You may want to use the append() function.```{r}summer Which of the following historical events most greatly affected both the U.S. and Canada? A. the civil rights movementB. the Great Depression C. the British North America ActD. the Civil War Do you think the author wa right to accept the necklace from the Jewih radio operator? Why or why not? Identify and correct the sentences which contain errors. 1. The trader has deceived his customers for years before he was found out. QUICKKKK I NEED HELP Quadrilateral ABCD is given, the interior angle at vertex B is 97 degrees and the exterior angle at vertex A is 88 degrees. Lines AB and CD are parallel. What is the most precise name for this given special quadrilateral? What is the measure of angle 1? What is the measure of angle 2? research suggests that the influence of social and cultural environments has increased in the united states since the 1990s due to . multiple choice question. a client with complex health needs takes a large number of medications. in order to reduce the likelihood of drug-food interactions, the nurse should encourage the client to: Pam worked as sale clerk is paid a basic rate of $3.75 during the rush Christmas Season.she works 6 hours overtime on Friday at time and quarter 8 hours overtime on Saturday at time and a half and 5 hours overtime on Sunday at double time..a)calculate Pam overtime wage for that week .b)Pam works a basic week of 40 hours calculate her basic wage.c)hence determine Pam gross wage for that week during Christmas THINK QUESTIONS1. Why did the people lose their wings? Cite textualevidence from the first two paragraphs to explainyour answer.4. A rotating platform with a radius of 2.0 m makes one complete turn every 3.0 s. The angular velocity of the platform is most nearly A 2.1 rad/s B 1.5 rad/s C 1.0 rad/s D 0.70 rad/s E 0.30 rad/s Function r has and . Based on the instantaneous growth rate, the population decreased days and the population increased days of all the colonies, which state had the most signatories? A chemist is using 389 milliliters of a solution of acid and water. If 18.6% of the solution is acid, how many milliliters of acid are there? John can mow his lawn in 3 hours and his sister, Julie, can mow it in 2 hours. How long will it take them to mow their lawn if they work together?A. 1 hour 12 minutesB. 1 hour 15 minutesC. 1 hour 20 minutesD. 1 hour 30 minutesE. 1 hour 35 minutes 14 seats in 2 rows = seats in 1 row A health psychologist, clinical psychologist, and a counseling psychologist would all be most interested in which of the following?a. How environmental influences bring out certain genetic traitsb. How people sense, perceive, learn, and think about the worldc. How people grow and change from the moment of conception through deathd. How frequent depression has prevented someone from carrying out their normal activities