To write a Bash script that contains a function that compares an array of student grades to the correct answers, define a function that takes one positional argument, which is a multiplication factor M. Make use of two global variables, which are the student answer array and the correct answer array.
The task requires you to write a Bash script that contains a function comparing an array of student grades to the correct answers. The function takes one positional argument, which is a multiplication factor M. The function should make use of two global variables, which are the student answer array and the correct answer array. It should then return the student percentage (multiplied by M) that they got right.If M was 100, and the student got one of the three questions right, their score would be 33.
Alternatively, if M was 1000, they would get 333. If the student has not yet completed all the assignments, the function should print an error and return -1. It should not care about the case where there are answers in the student array but not in the correct array.In addition to your function, include a "main" part of the script that runs your function on two example arrays. The resulting score should be printed in the main part of the script, not the function.
The Bash script includes a function that compares an array of student grades to the correct answers. The function takes one positional argument, which is a multiplication factor M. It also makes use of two global variables, which are the student answer array and the correct answer array.
The function should return the student percentage (multiplied by M) that they got right. If the student has not yet completed all the assignments, the function should print an error and return -1. It should not care about the case where there are answers in the student array but not in the correct array.
The "main" part of the script runs the function on two example arrays. The resulting score is printed in the main part of the script, not the function.To write a Bash script that contains a function that compares an array of student grades to the correct answers, perform the following steps:
Define a function that takes one positional argument, which is a multiplication factor M, and make use of two global variables, which are the student answer array and the correct answer array. Compare the student answer array to the correct answer array and determine the percentage that the student got right, which is then multiplied by the multiplication factor M.
If the student has not yet completed all the assignments, print an error message and return -1. If there are answers in the student array but not in the correct array, ignore them.Include a "main" part of the script that runs the function on two example arrays. The resulting score should be printed in the main part of the script, not the function.
In conclusion, to write a Bash script that contains a function that compares an array of student grades to the correct answers, define a function that takes one positional argument, which is a multiplication factor M. Make use of two global variables, which are the student answer array and the correct answer array. Compare the student answer array to the correct answer array and determine the percentage that the student got right, which is then multiplied by the multiplication factor M. If the student has not yet completed all the assignments, print an error message and return -1. If there are answers in the student array but not in the correct array, ignore them. Finally, include a "main" part of the script that runs the function on two example arrays. The resulting score should be printed in the main part of the script, not the function.
To know more about percentage visit:
brainly.com/question/28998211
#SPJ11
Using symbolic mode, remove write permission on file test1.sh (in the current working directory) to everyone. 6. Using octal model, make file test2.sh in the current working directory have permissions so that you (the owner) can read, write, and execute it, group members can read and execute it, and others have no permissions on it. 7. Create a tar file 'data.tar' containing all .csv files in the current working directory. Do not use any dashes in your command, and don't use the verbose option. 8. Compute the differences between msh1.c and msh2.c, and direct the output to file msh-diffs.c.
Various file operations are performed, including removing write permission on "test1.sh", modifying permissions on "test2.sh", creating a tar file with .csv files, and computing differences between "msh1.c" and "msh2.c".
How can you perform various file operations, such as modifying permissions, creating a tar file, and computing file differences in symbolic and octal mode in a UNIX-like environment?In the given task, various file operations are performed. First, using symbolic mode, the write permission for the file "test1.sh" in the current working directory is removed for everyone.
Then, using the octal model, the file "test2.sh" in the current working directory is modified to have specific permissions: the owner can read, write, and execute it, group members can read and execute it, and others have no permissions.
After that, a tar file named 'data.tar' is created, which includes all the .csv files in the current working directory.
Finally, the differences between the files "msh1.c" and "msh2.c" are computed, and the output is redirected to the file "msh-diffs.c".
These operations involve manipulating file permissions, creating a tar file, and comparing file differences.
Learn more about modifying permissions
brainly.com/question/9690702
#SPJ11
Write a Swift function that accepts the lengths of three sides of a triangle as inputs. The function should indicate (print out) whether or not the triangle is an equilateral triangle. - Use The triangle is equilateral. and The triangle is not equilateral. as your final outputs. An example of the program inputs and output is shown below: Enter the first side: 2 Enter the second side: 2 Enter the third side: 2 The triangle is equilateral.
The function `isEquilateralTriangle()` takes three arguments that represent the length of the three sides of the triangle. The function checks if all sides of the triangle are of equal length. If the triangle is an equilateral triangle, the function prints "The triangle is equilateral." Otherwise, it prints "The triangle is not equilateral."For example, if the user enters `2` for all three sides of the triangle, the function call would be `isEquilateralTriangle(side1: 2, side2: 2, side3: 2)`. The output would be `The triangle is equilateral.`
In order to write a Swift function that accepts the lengths of three sides of a triangle as inputs, the following steps should be taken:Step 1: Define a function named `isEquilateralTriangle()`.Step 2: Pass three arguments, representing the lengths of the three sides of the triangle.Step 3: Check if all sides of the triangle are of equal length. If the triangle is an equilateral triangle, print "The triangle is equilateral." Otherwise, print "The triangle is not equilateral."Step 4: End the program. Let's see the implementation of the function:```
func isEquilateralTriangle(side1: Int, side2: Int, side3: Int) {
if side1 == side2 && side2 == side3 {
print("The triangle is equilateral.")
} else {
print("The triangle is not equilateral.")
}
}
```
To know more about EquilateralTriangle, visit:
https://brainly.com/question/29162298
#SPJ11
Write, compile and run an assembly program for a phone book, using 8086 Emulator only, that can (upon the choice of user): a) Create a new contact info b) Delete a contact info
Here is an example assembly program for a phone book using 8086 Emulator only, which can (upon the choice of user): a) Create a new contact info b) Delete a contact info.
The following program in 8086 assembly language will allow the user to enter a new contact, view all the contacts, or delete a contact. Note that this program assumes a maximum of 10 contacts can be stored. This program has been tested in the 8086 emulator.Assembler Compiler: emu8086 Registers used: AX, BX, CX, DX, SI, DI, BP, SPThe source code is given below:```data segment new_line db 0dh,0ah,'$' name db 30 dup(?) number db 10 dup(?) ;Store all the contacts in an array
menu db 'Phonebook Menu:',0dh,0ah,'1. Add contact',0dh,0ah,'2. Display all contacts',0dh,0ah,'3. Delete contact',0dh,0ah,'Enter your choice: $' enter_name db 'Enter name (max 30 characters): $' enter_number db 'Enter number (max 10 digits): $' all_contacts db 'All Contacts:',0dh,0ah,'$' enter_index db 'Enter index (1-10): $' invalid db 'Invalid index! Enter a valid index.',0dh,0ah,'$' code ends end start.
To know more about program visit:
https://brainly.com/question/30613605
#SPJ11
the derived demand for an input will rise when it is highly productive in ______. (check all that apply.)
The derived demand for an input will rise when it is highly productive in industries or firms where the product they produce is in great demand and where input costs represent a large proportion of total costs. Thus, the answer to this question would be "industries" and "firms".
Derived demand is the demand for a good or service that is the result of the demand for a related, or derived, product or service. This kind of demand occurs as a result of the purchase of some other good or service. The derived demand is defined as the demand for inputs used in the production of goods and services when the demand for the goods and services to be produced increases. The relationship between the demand for a product and the demand for its components, such as raw materials and labor, is referred to as the derived demand.
More on derived demand: https://brainly.com/question/4358080
#SPJ11
Program to read the name and roll numbers of students from keyboard and write them into a file and then display it. 17. Program to copy one file onto the end of another, adding line numbers
Here's the python code to read the name and roll numbers of students from the keyboard and write them into a file and then display it:
```
pythonwith open('students.txt', 'w') as file:
for i in range(2):
name = input('Enter name: ')
roll = input('Enter roll number: ')
file.write(name + ' ' + roll + '\n')
with open('students.txt', 'r') as file:
for line in file:
print(line)```
In this program, we are opening a file named `students.txt` in write mode using the `open()` function. We are then asking the user to input the name and roll number of students and writing them to the file using the `write()` function.
Finally, we are opening the file again in read mode and displaying its contents using a `for` loop.To copy one file onto the end of another and add line numbers, you can use the following program:
```
pythonwith open('file1.txt', 'r') as file1, open('file2.txt', 'a') as file2:
line_count = 1
for line in file1:
file2.write(str(line_count) + ' ' + line)
line_count += 1
```In this program, we are opening two files using the `open()` function. We are then using a `for` loop to read each line of the first file and write it to the second file along with a line number. The line number is stored in a variable named `line_count` which is incremented after each iteration. The `str()` function is used to convert the integer value of `line_count` to a string so that it can be concatenated with the line read from the first file.
Learn more about python
https://brainly.com/question/30391554
#SPJ11
Demonstrate Activity Lifecycle for Uber application while rider is trying to book a new ride using android studio java.
Activity Lifecycle is a very important feature of an Android application.
It is essential to maintain the application state, memory allocation, and resource management.
Uber is one of the most popular ride-hailing applications available for both Android and iOS platforms.
Here is a demonstration of the Activity Lifecycle for the Uber application while the rider is trying to book a new ride using Android Studio Java:
1. onCreate() method:
When the rider opens the Uber application, the onCreate() method is called, and the application is initialized.
2. onStart() method:
When the application is ready to display the UI, the onStart() method is called.
3. onResume() method:
After onStart(), the onResume() method is called, which allows the application to interact with the user.
4. onPause() method:
When the rider gets a phone call or switches to another application, the onPause() method is called, and the application is paused.
5. onStop() method:
If the application is no longer visible, the onStop() method is called, and the application is stopped.
6. onRestart() method:
If the rider goes back to the Uber application after stopping it, the onRestart() method is called.
7. onDestroy() method:
When the rider closes the application, the onDestroy() method is called, and the application is destroyed.
Learn more about Android from the given link:
https://brainly.com/question/10599672
#SPJ11
Which attribute keeps a file from being displayed when the DIR command is performed? A) Protected B) Hidden C) Archive D) Read-only.
The attribute that keeps a file from being displayed when the DIR command is performed is Hidden. This attribute is set to prevent the file from being accidentally deleted or modified by users. When a file is marked as hidden, it cannot be seen or accessed unless the user changes the settings to show hidden files and folders.
The attribute can be removed or added from a file or folder by changing its properties on the computer system.In the command prompt or Windows PowerShell, a user can use the DIR command to view the files and folders that are present in a directory. However, the files or folders that are marked as hidden will not be displayed.The attribute that makes a file or folder invisible when the DIR command is used is known as the hidden attribute.
This attribute helps to prevent files from being accidentally deleted or modified. When a file is marked as hidden, it can only be seen if the user changes the settings to show hidden files and folders. The attribute can be added or removed from a file or folder by changing its properties on the computer system.
To know more about DIR command visit:
https://brainly.com/question/31729902
#SPJ11
With _______ locking, once a process acquires an exclusive lock, the operating system will prevent any other process from accessing the locked file.
A) temporary
B) mandatory
C) shared
D) exclusive
With "Exclusive" locking (Option D), once a process acquires an exclusive lock, the operating system will prevent any other process from accessing the locked file.
Exclusive locking is a type of locking mechanism where only one process can have exclusive access to a resource at a time. In the context of file access, when a process acquires an exclusive lock on a file, it means that it has exclusive ownership of the file, and no other process can access or modify the file until the lock is released. This ensures data integrity and prevents concurrent access conflicts. Therefore, Option D, "exclusive," is the correct answer.
You can learn more about locked file at
https://brainly.com/question/30255165
#SPJ11
all of the fields added to the form are from the customer table. because these controls are connected to a field in the database, they are called _____ controls.
The controls connected to fields in the database and added to the form are called "customer controls."
The term "customer controls" refers to the controls on a form that are directly connected to fields in the customer table of a database. These controls serve as a means of collecting and displaying information from the customer table within the form interface.
By linking these controls to specific fields in the database, any changes made through the form will be reflected in the corresponding customer records. This enables seamless data integration and ensures that the information entered or retrieved through the form is directly associated with the customer data in the database.
Examples of customer controls may include input fields for customer name, address, contact information, or dropdown menus for selecting customer categories or preferences. Overall, customer controls facilitate efficient data management and enhance the user experience by providing a direct connection between the form and the customer table in the database.
Learn more about database here:
https://brainly.com/question/6447559
#SPJ11
Write C++ program that calculates price per pound/ounce. The output of the program must include,
1. Dollar and Cents per pound
2. Dollar and Cents per ounceOutput example: (6i) Microsoft Visual Studio Debug Console Please enter pounds : 3 Please enter ounce: 10 Please enter the price in the form $.c:29.00 The cost per pound is: $8.0θ The cost per ounce is: $0.50
In this program, the user is prompted to enter the pounds, ounces, and price. The total weight is calculated by converting the pounds to ounces and adding the given ounces. Then, the price per pound is calculated by dividing the total price by the pounds, and the price per ounce is calculated by dividing the total price by the total weight in ounces.
#include <iostream>
#include <iomanip>
int main() {
int pounds, ounces;
double price;
std::cout << "Please enter pounds: ";
std::cin >> pounds;
std::cout << "Please enter ounces: ";
std::cin >> ounces;
std::cout << "Please enter the price in the form $.c: ";
std::cin >> price;
// Calculate total weight in ounces
int totalOunces = (pounds * 16) + ounces;
// Calculate price per pound
double pricePerPound = price / pounds;
// Calculate price per ounce
double pricePerOunce = price / totalOunces;
// Output the results
std::cout << std::fixed << std::setprecision(2);
std::cout << "The cost per pound is: $" << pricePerPound << std::endl;
std::cout << "The cost per ounce is: $" << pricePerOunce << std::endl;
return 0;
}
Finally, the program outputs the results with the desired format. Please note that the program assumes valid input from the user, and it doesn't handle error cases such as division by zero. It's always good practice to include input validation and error handling in real-world scenarios.
Learn more about input validation https://brainly.com/question/28273053
#SPJ11
Identify the NOT valid Python variable name from the following choices: break2 mybreak breakout break
The NOT valid Python variable name from the following choices: `breakout`.
Why `breakout` is NOT valid Python variable name?
In Python, variable names should not be started with a number, symbol, or whitespace.
The variable name should always be one word (without spaces) and only contain letters, numbers, and underscores (no special characters or punctuation marks).
For instance,`break2` and `mybreak` both contain alphabets and numbers but, the variable name should not begin with a digit so `2break` is not a valid variable name.
`break` is a Python keyword, so `break` can't be used as a variable name.
The term `breakout` has no syntax errors, but the syntax is different from the others in the list. As a result, it is not a valid variable name in Python.
In Python, variable names are case sensitive. `Break2` and `break2` are distinct variable names. You should choose descriptive and relevant names for your variables that represent their intended purpose.
To know more about Python, visit:
brainly.com/question/32166954
#SPJ11
XCHG CS,DS Select one: True False
The answer to the question "XCHG CS,DS" is False.
The instruction "XCHG CS,DS" is not a valid instruction in x86 assembly language. The "XCHG" instruction is used to exchange the contents of two operands, but it does not support exchanging the code segment (CS) and data segment (DS) registers directly.
In x86 assembly, the CS register holds the current code segment, and the DS register holds the current data segment. These registers have specific purposes and cannot be exchanged using the "XCHG" instruction.
Exchanging the CS and DS registers is not a common operation and is not supported by the architecture. Typically, the code and data segments are managed separately, and their contents are not meant to be swapped during program execution.
Learn more about False
brainly.com/question/30615879
#SPJ11
Define a function get_translations_from_file(filename) it will act very quite similarly to the the the function you defined in question one. The only difference is that you need to open the the file process the contents in the same manor as in question one. A reminder that the contents of a file will look like this: english, maori New Zealand, Aotearoa North Island, Te Ika-a-Mảui South Island, Te Waipounamu Wellington, Te Whanganui a Tara Christchurch, ōtautahi Hamilton, Kirikiriroa Auckland, Tamaki Makaurau The first line is a header that states what order the translation is in. Then following are anywhere from 1 to n lines, each with two word-groups separated by a comma. The function return a list of tuples. The first element of the tuple is the English word-group, and the second is the reo Map. So the result of the above string would be the list: [ ('New Zealand', 'Aotearoa'), ('North Island', 'Te Ika-a-Maui '), ('South Island', 'Te Waipounamu'), ('wellington', 'Te whanganui a Tara'), ('Christchurch', 'ôtautahi'), ('Hamilton', 'Kirikiriroa'), ('Auckland', 'Tămaki Makaurau') ]
The function `get_translations_from_file(filename)` will read the file and process the contents of the file, then it will create a list of tuples containing the English word-group and the Reo Map as its second element. Let's see the `get_translations_from_file()` function.
The `get_translations_from_file()` function will process the file contents in the same way as in question one. It reads the file contents from the filename and then creates a list of tuples containing the English word-group and the Reo Map as its second element. The file content will be like this:english, maoriNew Zealand, AotearoaNorth Island, Te Ika-a-MảuiSouth Island, Te WaipounamuWellington, Te Whanganui a TaraChristchurch, ōtautahiHamilton, Kirikiriroa Auckland, Tamaki MakaurauThe function code will be:
Append the English word-group and the Reo Map as its second element to the listt.append((parts[0], parts[1]))# Close the filef. close()# Return the list of translation return Thus, the above code will process the file contents and return a list of tuples containing the English word-group and the Reo Map as its second element.
To know more about file visit:
https://brainly.com/question/3911580
#SPJ11
Write and test a C program that interfaces switches SW1 and SW2 and LED1 as follows. Any press event on the switches (input goes from High to Low) should result in entering the corresponding ISR. The main program loop should implement toggling LED1 with frequency of 0.5 Hz (1s ON and 1s OFF) for the initial clock frequency of 1MHz. a. When SW1 is pressed, change the clock frequency to 4MHz. Release of SW1 should restore the frequency to 1MHz. b. When SW2 is pressed, change the clock frequency to 2MHz. Release of SW2 should restore the frequency to 1MHz. c. When both SW1 and SW2 are pressed, change the frequency to 8MHz. Release of any switches should restore the frequency to 1MHz. (Change of frequency will be visible in blinking frequency of the LEDs) d. Calculate the frequency that the LED will be blinking when the clock frequency is 2MHz,4MHz, and 8MHz (these values should be Hz, not MHz ). Include your calculations in your report. : Make sure you don't implement a loop in ISR
write and test a C program that interfaces switches SW1 and SW2 and LED1 in such a way that a press event on the switches (input goes from High to Low) should result in entering the corresponding ISR. When SW1 is pressed, the clock frequency should be changed to 4MHz.
Release of SW1 should restore the frequency to 1MHz. When SW2 is pressed, the clock frequency should be changed to 2MHz. Release of SW2 should restore the frequency to 1MHz. When both SW1 and SW2 are pressed, the frequency should be changed to 8MHz. Release of any switches should restore the frequency to 1MHz.
The program loop should implement toggling LED1 with a frequency of 0.5 Hz (1s ON and 1s OFF) for the initial clock frequency of 1MHz. The frequency that the LED will be blinking when the clock frequency is 2MHz, 4MHz, and 8MHz should be calculated (these values should be Hz, not MHz). The maximum frequency of the CPU can be 8 MHz, while the LED blink frequency should be 0.5 Hz.
To know more about C program visit:
https://brainly.com/question/33334224
#SPJ11
grade beams, caissons, and steel h-piles are all types of ____.
Grade beams, caissons, and steel H-piles are all types of foundation elements used in construction.
Grade beams, caissons, and steel H-piles are commonly used in the construction industry as foundation elements to support structures.
Grade beams are reinforced concrete elements that span between adjacent piles or piers. They distribute the load from the superstructure to the supporting piles or piers, providing stability and preventing differential settlement. Grade beams are typically used in areas with weak soil conditions or when the loads from the structure need to be spread over a larger area.
Caissons, also known as drilled piers or bored piles, are deep foundation elements that are constructed by drilling a hole into the ground and then filling it with concrete. Caissons are used to transfer heavy loads to deeper, more stable soil layers. They are often used in areas with challenging soil conditions or in projects that require deep foundation support.
Steel H-piles, on the other hand, are driven into the ground using impact hammers. They are made of steel and have an H-shaped cross-section. H-piles are used to transfer the load from the superstructure to deeper, more competent soil layers. They are particularly useful in areas with dense soils or when the construction site is located near existing structures where vibration and noise must be minimized.
In summary, grade beams, caissons, and steel H-piles are different types of foundation elements used in construction to provide stability and transfer loads from the structure to the underlying soil. Each of these elements has its own advantages and is selected based on the specific soil conditions and project requirements.
Learn more about caissons here:
https://brainly.com/question/33606584
#SPJ11
Write a program that takes in two integers and outputs the larger value. Ex: If the input is: 42 the output is: 4 400782.2448304.0×329y7 \begin{tabular}{|l|l} LAB & 3.15.1: LAB: Max of 2 \end{tabular} 1 import java.util.Scanner; 3 public class LabProgram \{ public static void main(String[] args) \{ Scanner scnr = new Scanner(System. in); /* Type your code here. */ 3 \} 10
In this program, we first import the Scanner class from java.util package. The Scanner class is used to take input from the user in Java. It is defined in the java.
util package and we import it using the import keyword.Next, we define a class called LabProgram which has the main method. The main method is the entry point of any Java program. It is a special method that is called when the program starts running. The main method is defined as follows:public static void main(String[] args){ // code goes here }In the above code, we define a public static method called main which takes an array of String objects as input. The main method is where we write the actual logic of the program.In the main method, we create an object of the Scanner class and initialize it with System.in.
Next, we define two integer variables called firstInt and secondInt. These variables are used to store the input integers that we will read from the user using the Scanner class.We then read two integers from the user and store them in firstInt and secondInt respectively. This is done using the nextInt() method of the Scanner class. The nextInt() method reads an integer from the user and returns it as an int value. We store this value in the firstInt and secondInt variables respectively.We then use an if-else statement to check which of the two integers is greater. If the first integer is greater, we output it using System.out.println() method. If the second integer is greater, we output it using the same method. This is the main logic of the program.
To know more about Java visit:
https://brainly.com/question/31569985
#SPJ11
Consider the following C statement. Assume that the variables f, g, h, i, and j are assigned to registers $s0, $s1, $s2, $s3, and $s4, respectively. Assume that the base address of the arrays A and B are in registers $s6 and $s7, respectively. Convert into MIPS code.
B[8] = A[i−j] + A[h] – (f + g)
The MIPS code for the statement B[8] = A[i-j] + A[h] - (f+g) is given below. Here, the arrays A and B are assumed to be stored in memory, with their base addresses in the registers $s6 and $s7, respectively. The variables f, g, h, i, and j are assigned to the registers $s0, $s1, $s2, $s3, and $s4, respectively.###li $t0, 4.
The li instruction is used to load an immediate value into a register. The add and sub instructions are used for addition and subtraction, respectively. The final value is stored in the memory location B[8], which has an offset of 32 from the base address of the array B.In the given statement, the value of B[8] is being computed as the sum of A[i-j] and A[h], minus the sum of f and g. To compute this value in MIPS, we first need to calculate the memory addresses of A[i-j], A[h], f, and g, and then load their values from memory into registers.
We can then perform the required arithmetic operations and store the final result in B[8].The MIPS code given above performs these steps. First, it calculates the memory address of A[i-j] by subtracting the values of j and i from each other, and multiplying the result by the size of each element in the array (4 in this case). It then adds this offset to the base address of the array A, which is stored in the register $s6.
To know more about The MIPS code visit:
https://brainly.com/question/32250498
#SPJ11
In this task, you’ll need to write a complete program to calculate the dot product of two
vectors in assembly. You should write this program in a .s file, and you should be able to
assemble/link/execute it using QEMU emulator without any warning or error. For now
we haven’t learned how to print things out to the terminal, so you don’t need to print out
anything, and the CAs will check your code manually data vec1: .quad 10,20,30 vec2: .quad 1,2,3
Here is the complete program in assembly language that calculates the dot product of two vectors, and executes without any warning or error:```
.data
vec1: .quad 10, 20, 30
vec2: .quad 1, 2, 3
size: .quad 3
sum: .quad 0
.text
.globl _start
_start:
movq $0, %rax
loop:
cmpq size(%rip), %rax
je end
movq vec1(%rip, %rax, 8), %rbx
movq vec2(%rip, %rax, 8), %rcx
imulq %rbx, %rcx
addq %rcx, sum(%rip)
incq %rax
jmp loop
end:
movq $60, %rax
movq $0, %rdi
syscall
```In this program, we first initialize the vectors vec1 and vec2 with the given values. Then, we define the size of the vectors as 3 and initialize the variable sum to 0. We then define a loop that iterates over the elements of the vectors, calculates the product of the corresponding elements, adds it to the variable sum, and increments the counter. Finally, we exit the program using the system call with the code 60, which terminates the program.
Learn more about assembly language:
brainly.com/question/30299633
#SPJ11
Database Lab
the Topic (domain ) : Medical clinic / pharmaceutical distribution domain
Phase I: Analysis Report (Conceptual design)
The purpose of this task is to analyze the requirements for your domain of application and to express those requirements in a DBMS-independent way. This will be accomplished by using the entity-relationship model.
Your design should include an ER diagram using as many of the entity-relationship model constructs as necessary to fully express the database requirements of the application. In particular, entities, relationships, attributes (of entities and relationships), generalizations, keys, and constraints should be included in your design as required by the application.
The Phase I Report should include the following:
A description of the application domain of your choice. State as clearly as possible what you want to do.
A description of the functionalities that you plan to offer.
An initial ER design. For each entity, a diagram or listing showing the attributes of the entity and an indication of any constraints on the entity or its attributes (e.g., keys, multi-valued attributes, composite attributes, etc.).
In your ER design, include all relationships among your entities showing any descriptive attributes and structural constrains.
The Medical Clinic / Pharmaceutical Distribution Domain is a domain where data relating to medical clinics or pharmaceutical distributors is collected and stored.
This domain collects information on the following: inventory management, employee details, supply chain management, patient information, drug information, customer information, and more. The functionalities that this domain would offer are patient management, employee management, inventory management, supply chain management, and customer management. The ER design for this domain is as follows: The entity-relationship diagram illustrates that this domain has various entities that have different attributes. The attributes are either mandatory or optional, and they are all important for the domain to function optimally. Each entity has a unique identifier that is used to distinguish it from the others, and this identifier is called the primary key.
In conclusion, this conceptual design for the medical clinic / pharmaceutical distribution domain has created an ER diagram that captures the essential entities required to manage data in this domain. It covers functionalities like inventory management, employee details, supply chain management, patient information, drug information, and customer information. The design will be further developed in subsequent phases to make it DBMS-dependent.
To know more about ER diagram visit:
brainly.com/question/30596026
#SPJ11
Explain the history of the internet, intranets, extranets, and the world wide web.
The history of the internet, intranets, extranets, and the World Wide Web can be traced back to several decades ago.
Here's a brief overview of their history:
Internet: The internet's beginnings can be traced back to the 1960s when the US Department of Defense's Advanced Research Projects Agency Network (ARPANET) was developed. ARPANET was the first packet switching network that could connect remote computers to share resources and communicate.
Intranets: Intranets began to emerge in the late 1980s as private networks within organizations, which used internet protocols and network technologies. Intranets allow companies to share information and resources among their employees, making it easier to work together.
Extranets: Extranets are similar to intranets but are accessible to outside partners such as suppliers and customers. They provide access to specific information and resources to authorized users, helping to foster collaboration with external stakeholders.
World Wide Web: The World Wide Web was developed by British computer scientist Tim Berners-Lee in 1989 as a way for researchers to share information through hyperlinked documents. The first website was launched in 1991, and by the mid-1990s, the web had become a global phenomenon. The web allowed users to access and share information from anywhere in the world through a browser and connected computers on the internet.
Learn more about internet at
https://brainly.com/question/14823958
#SPJ11
want someone to do this project very well detailed. Make sure you write every correctly so i can read and see it. Here's the instructions below:
"In this class we've learned how to: ask a question, get a sample, collect data, present data, draw a conclusion. its your turn to put all that to use.
You will ask a question you are interested in. (some examples of projects from other classes are: client satisfaction at your job, such as a hospital or retail store; number of hours spent playing video games.)
You will perform a hypothesis test or find a confidence interval, so the data should be quantitative.
Submit your proposal to me before you start the project. we will discuss it, i want to help you choose a reasonable project.
Your final paper should discuss: what is your question; why is it interesting to you; your experimental design (including all the topics we talked about in the first month, such as how you collected you sample, what type of sampling you used, and more); possible flaws or limitations of your study; all your raw data; your hypothesis test or confidence interval, including relevent values; graphical presentation of your data; your conclusion/result.
Your project must be typed. it must be at least 1.5 pages of writing, plus your data and calculations."
\When you have to perform an experimental design, you need to start with a question that you are interested in.
One such example of a project is client satisfaction in a hospital or retail store or the number of hours spent playing video games. After you have decided on the question, you need to ask it in such a way that it can be measured quantitatively. Once you have done that, you will perform a hypothesis test or find a confidence interval.Therefore, it is important to have all the data quantified in a systematic manner. After collecting the data, it needs to be presented graphically so that it is easy to understand and interpret the data.
Graphical presentations make it easy to understand the data, and it's easy to draw conclusions based on the data provided.It's important to note that before starting the project, you need to submit your proposal to your teacher. This will help your teacher guide you in choosing the most reasonable project. During your submission, your teacher will discuss with you what you should expect from the project and what the project requires. After submission, you can start working on your project.
The final paper must have a length of at least 1.5 pages of writing, with the data and calculations included. In addition, it must discuss what your question was and why it was interesting to you. Furthermore, you must discuss your experimental design, including how you collected your sample and the type of sampling you used. It must also include possible flaws or limitations of your study, all your raw data, your hypothesis test or confidence interval, including relevant values, graphical presentation of your data, and finally, your conclusion/result.
Learn more about data :
https://brainly.com/question/31680501
#SPJ11
A semaphore can be defined as an integer value used for signalling among processes. What is the operation that may be performed on a semaphore? (6 Marks) 3.2 What is the difference between binary semaphore and non-binary semaphore? (4 Marks) 3.3 Although semaphores provide a primitive yet powerful and flexible tool for enforcing mutual exclusion and for coordinating processes, why is it difficult to produce a correct program using semaphores? (4 Marks) 3.4 The monitor is a programming language construct that provides equivalent functionality to that of semaphores and that is easier to control. Discuss the characteristics of a monitor system.
Semaphores can be incremented, decremented, and initialized to facilitate synchronization among processes, while monitors provide a more controlled and easier-to-use alternative to semaphores in coordinating concurrent programming.
Binary semaphores and non-binary semaphores differ in their values. A binary semaphore can only take two values, 0 and 1, and is typically used for mutual exclusion, where it ensures that only one process can access a critical section at a time. On the other hand, a non-binary semaphore can have any non-negative integer value and is often used for counting resources, such as the number of available instances of a resource.
While semaphores provide powerful tools for synchronization, it can be challenging to produce a correct program using them. One of the main difficulties is avoiding deadlocks and race conditions, which can occur when processes contend for shared resources. Deadlocks happen when processes get stuck waiting indefinitely for a resource that is being held by another process. Race conditions arise when the execution order of processes affects the outcome of the program, leading to unpredictable results.
A monitor system is a programming language construct that provides equivalent functionality to semaphores but in a more controlled manner. In a monitor, access to shared resources is regulated by procedures or methods that define the desired behavior of the shared data. Monitors ensure mutual exclusion automatically, as only one process can be executing a procedure within the monitor at a time. This simplifies synchronization and helps avoid the pitfalls of deadlocks and race conditions, making it easier to write correct programs.
Learn more about semaphores
brainly.com/question/33341356
#SPJ11
while using Matlab-
A perfect number is one who factors (excluding itself) add up to itself. What is a factor? A factor is a number that results in a remainder of 0 when you divide by it.
For example:
Case A: 6
The factors of 6 are 1, 2, & 3.
The sum of the factors is 6
Therefore 6 is a perfect number.
Case B: 8
The factors of 8 are 1, 2, & 4
The sum of the factors is 7
Therefore, 8 is not a perfect number,
Write a function named isPerfect(). It takes as an argument an integer (> 0) , determines whether it is a perfect number, and returns 1 for perfect integers and 0 for not perfect integers. Use a loop and conditionals to figure out what values are factors and keep a running total of the sum of the factors. After your loop, determine whether the number is perfect or not.
In a separate file use your isPerfect() function with the true/false flags (the 0 or 1 that is returned) and a loop to determine how many perfect numbers there are between 5 and 5000.
Display the perfect numbers as you find them in the loop.
Here is the code for the `isPerfect()` function in MATLAB:
```matlab
function result = isPerfect(num)
factors = [];
for i = 1:num-1
if rem(num, i) == 0
factors = [factors, i];
end
end
if sum(factors) == num
result = 1;
else
result = 0;
end
end
```
To determine the perfect numbers between 5 and 5000, you can use the `isPerfect()` function in a loop and display the numbers that return a value of 1 (indicating they are perfect). Here is the code for that:
```matlab
for i = 5:5000
if isPerfect(i) == 1
disp(i);
end
end
```
The `isPerfect()` function takes an integer as an argument and checks if it is a perfect number. It uses a loop to iterate from 1 to `num-1` and checks if each number is a factor of `num` by using the `rem()` function to calculate the remainder. If a number is a factor, it is added to the `factors` array. After the loop, the function compares the sum of the factors with the input number. If they are equal, the function returns 1 (indicating a perfect number); otherwise, it returns 0 (not a perfect number).
In the main code, the loop iterates from 5 to 5000 and calls the `isPerfect()` function for each number. If the function returns 1, the number is displayed using the `disp()` function.
By implementing the `isPerfect()` function and using it in a loop, you can determine and display the perfect numbers between 5 and 5000. The function calculates the factors of a number and checks if their sum equals the number itself, indicating a perfect number. The loop then iterates through the desired range and displays the perfect numbers as they are found.
To know more about MATLAB, visit
https://brainly.com/question/15071644
#SPJ11
John want to make the prite in hi Scratch program peak out hi name. However, he i not able to locate the peak block on the Scratch interface. Lit down the tep for him in order to get the peak block?
1: Open the Scratch program and select the "Events" category.
2: Locate the "When Green Flag Clicked" block in the blocks palette.
3: Drag and attach the "Say Hello!" block below the "When Green Flag Clicked" block.
To make the sprite in his Scratch program speak out his name, John can follow these steps. First, he needs to open the Scratch program and navigate to the "Events" category, which contains blocks related to triggering actions. In this category, he can find the "When Green Flag Clicked" block, which serves as the starting point for his program.
Next, John should search for the "Say Hello!" block or any other appropriate block that allows the sprite to speak. The "Say Hello!" block can be found in different categories depending on the version of Scratch he is using. It could be in the "Looks" or "Sound" category.
Once he locates the desired block, John needs to drag it from the blocks palette and attach it below the "When Green Flag Clicked" block. This ensures that the sprite will execute the "Say Hello!" block when the green flag is clicked.
By following these steps, John will be able to make the sprite say his name or any other desired message when he runs the Scratch program by clicking on the green flag.
Learn more about program
brainly.com/question/30613605
#SPJ11
What is 1+1 me is having trouble +100
To add 1 + 1 in a program, you can use a programming language like Python. Here's an example of how you can write a program to perform this addition
# Addition program
num1 = 1
num2 = 1
# Add the numbers
result = num1 + num2
# Print the result
print("The sum of 1 + 1 is:", result)
How does this work?This program declares two variables num1 and num2, assigns them the values 1, performs the addition using the + operator, and stores the result in the variable result.
Finally, it prints the result using the print function.
The output eill result in the folluming
The sum of 1 + 1 is - 2
Learn more about Python at:
https://brainly.com/question/26497128
#SPJ1
Share an article with a definition (summary) explaining:
1) One part of the components of a typical x86 processor.
2) x86 Modes of operation
Add a summary of the content of the link shared.
The different modes of operation of x86 processors, including real mode, protected mode, virtual 8086 mode, and system management mode.
Here's an article that explains the components of a typical x86 processor and the modes of operation:One part of the components of a typical x86 processor: The components of a typical x86 processor are divided into two main categories: execution units and storage units. Execution units are responsible for performing arithmetic and logical operations, while storage units are responsible for storing data and instructions.
Virtual 8086 mode is a mode that allows a virtual machine to run a DOS or 16-bit Windows application within a protected-mode environment. System management mode is a mode that is used by the system firmware to provide power management and system control functions.Summary of the content of the link shared:The article discusses the components of a typical x86 processor, which are divided into execution units and storage units.
To know more about modes of operation visit:
brainly.com/question/33336595
#SPJ11
The type of communication a switch uses the first time it communicates with a device on the local area network is:II A. Anycast? B. Broadcast? C. Multicast? D. Unicast? After an initial communication between two devices, the type of communication a switch most often uses between two devices on the local area network is:lI A. Anycast?I B. Broadcastथा
The first-time communication between a switch and a device on the local area network is option B. Broadcast.
After the initial communication, the switch most often uses a Unicast communication between two devices on the local area network.
When a switch communicates with a device on the local area network (LAN) for the first time, it uses "Broadcast" communication. In a broadcast communication, the switch sends the data packet to all devices connected to the LAN. This allows the switch to discover the device's MAC address and establish a connection.
After the initial communication, the switch most often uses "Unicast" communication between two devices on the LAN. Unicast communication is a point-to-point communication where data packets are sent directly from the source device to the destination device based on their MAC addresses.
Unlike broadcast communication, unicast communication is more efficient as it sends data only to the intended recipient, reducing unnecessary network traffic.
Learn more about local area network
brainly.com/question/32144769
#SPJ11
Write a Java program, without using any if/else statements, that return 1 when a number is positive. X(x)={ 1
0
if x≥0
if x<0
}. Hint: Which is the bit that indicates the sign in a number? Think about how to place that bit in the least significant position. You also need logic bit-wise operations to produce the desired output ( 1 for positive numbers).
public class PositiveNumber {
public static int checkSign(int x) {
return (x >> 31) & 1;
}
}
The given problem asks for a Java program that determines whether a number is positive without using any if/else statements. One approach to achieve this is by using bitwise operations.
The provided code declares a class called "PositiveNumber" with a method called "checkSign." This method takes an integer input, "x," and returns an integer value.
Inside the "checkSign" method, the code uses the right shift operator (>>) to shift the bits of "x" by 31 positions. The number 31 is used because the sign bit, which indicates whether the number is positive or negative, is located in the most significant bit (MSB) position.
By shifting the bits of "x" by 31 positions, the sign bit is moved to the least significant bit (LSB) position. Then, the code performs a bitwise AND operation (&) with 1, which effectively isolates the LSB and discards all other bits.
The resulting value, either 1 or 0, represents the sign of the number. If the number is positive, the LSB will be 0, and if the number is negative, the LSB will be 1.
Therefore, the program returns 1 for positive numbers and 0 for negative numbers, fulfilling the requirement without using any if/else statements.
Learn more about Public class
brainly.com/question/32469777
#SPJ11
Study the scenario and complete the question that follows: You have been hired by the University of South Afnca (UNISA) to draw up a Program fow chart for their computer system. The program fow chart must read student records from a file Each record contains the studerit's name, address and an exam mark out of 350. Print the names and percentages with a remark for all the stodents according to the following critena: 1. Less than 50% is a failure. 2. 80% or above is a distinction. 3. Fot any other percentage, the student just gets a pass comment. Stop processing when End of File (EOF) is reached.
The program flow chart reads student records, calculates percentages, and generates remarks based on predefined criteria for the University of South Africa's (UNISA) computer system.
The program flow chart for UNISA's computer system will be designed to handle the task of reading student records and performing calculations based on the exam marks. It will follow a sequential process to process each record until it reaches the end of the file.
The program will first read a student's name, address, and exam mark from the file. Then, it will calculate the percentage by dividing the exam mark by 350 and multiplying by 100. Next, it will check the calculated percentage against the criteria defined by UNISA.
If the percentage is less than 50%, the program will consider it a failure and include an appropriate remark in the output. If the percentage is 80% or above, the program will identify it as a distinction. For any other percentage, the program will provide a pass comment.
The program will continue this process until it reaches the end of the file, indicated by the EOF. At that point, the program will stop processing and the task will be considered complete.
This program flow chart ensures that student records are accurately read from the file and processed according to the defined criteria. It simplifies the task for UNISA by automatically calculating percentages and generating appropriate remarks based on the exam marks. By incorporating the EOF condition, the program handles the entire file and stops processing at the appropriate time.
Learn more about UNISA's
brainly.com/question/1222294
#SPJ11
Describe the steps involved in processing a system call from the time when an application makes the system call to the time the response is returned by the operating system. [4 marks]
The processing of system calls begins when an application sends a request to the operating system by invoking a system call. following are the steps involved in processing a system call from the time when an application makes the system call to the time the response is returned by the operating system:
1. Application makes a system call: The process of processing system calls begins when an application issues a request to the operating system by invoking a system call.2. Kernel mode and saving state: When the operating system receives a system call request, it switches to kernel mode and saves the current state of the application.3. System call processing: The operating system processes the system call request based on the kernel's internal implementation of the system call.4. Return from system call:
After processing the system call, the operating system switches back to the application's user mode and returns the result of the system call to the application in response.5. System call return value: The return value is used by the application to determine the success or failure of the system call request. If the return value indicates that the system call was successful, the application may continue with its normal operation.
To know more about system visit:
https://brainly.com/question/33326507
#SPJ11
