Photons can interact with charged particles in a number of ways, depending on the energy of the photon and the properties of the charged particle.
explain about the process of scattering ?
In the process of scattering, a photon collides with a charged particle, causing it to change direction. This can occur through various mechanisms, such as Compton scattering, where a photon transfers some of its energy to an electron, causing it to recoil and emit a new photon with a different wavelength and direction.
In the process of absorption, a photon is absorbed by a charged particle, which may then be excited to a higher energy level. This can occur through various mechanisms, such as the photoelectric effect, where a photon ejects an electron from an atom or molecule, or through excitation of the electrons in a material.
Overall, the interaction between photons and charged particles depends on the properties of both the photon and the charged particle, such as their energy, wavelength, and charge, as well as the physical environment in which they interact.
To learn more about photon follow the given link: https://brainly.com/question/28467736
#SPJ4
the potential energy of an object u as a function of x looks like the plot shown above. 1)where is the force the biggest in the negative x direction?
The force on an object is the rate of decrease in potential energy. Hence, in the plot the region having a negative slope is the one with biggest force. Then, c is correct.
What is potential energy ?Potential energy of a body is generated by virtue of the position of the object. Hence, this form of energy is stored in the object when it is at rest. When the object starts moving its potential energy converts to kinetic energy.
Force is an external agent acting on a body to change its motion. The relation between potential energy force applied is given as:
F = - dU/dx
where potential energy U = mgh
then
F = - d/dx (mgh)
From the plot of potential energy,
F = -slope.
Hence, the x component with maximum slope have the biggest force. Here, it is the region C.
Find more on potential energy:
https://brainly.com/question/12807194
#SPJ1
The image related to your question is given here:
A 600 g bat is swung quickly and hits a 150 g baseball. Which is true? a. The bat exerts a larger force on the ball than the ball exerts on the bat. b. The bat exerts a force on the ball, but the ball does not exert a force on the bat. c. The bat exerts the same amount force on the ball as the ball exerts on the bat.d. The bat exerts less force on the ball than the ball exerts on the bat.
Answer:
C) Each exerts an equal force on each other - Newton's Third Law states that for every action there is an opposite and equal reaction.
Normally, materials are electrically neutral because there are ____.
more positively charged particles than negatively charged particles
more negatively charged particles than positively charged particles
equal numbers of positively charged particles and neutrally charged particles
equal numbers of positively charged particles and negatively charged particles
Normally, materials are electrically neutral because there are equal numbers of positively charged particles and negatively charged particles, hence option D is correct.
What is an electrically neutral particle?Since there are exactly as many electrons in an atom as there are protons, the positive and negative charges "balance out," leaving atoms electrically neutral.
Neutrons are found in the nuclei of all atoms, with the exception of the majority of hydrogen atoms. Neutrons are electrically neutral, as opposed to electrically charged protons and electrons.
Therefore, due to having an equal number of positively charged particles and negatively charged particles materials are electrically neutral.
Learn more about electrically neutral, here:
https://brainly.com/question/13015042
#SPJ9
what if? if the woman still pulls on the strap with a 34.5 n force but wishes to accelerate the suitcase at a rate of 0.500 m/s2, at what angle (in degrees) must she pull on the strap? assume that the rolling friction is independent of the angle of the strap.
The angle at which the woman pull on the strap with a 34.5N force but wishes to accelerate the suitcase at a rate of 0.500 m/s2 is 0°
Given:
F = 34.5 N
Friction force = 20.0 N
m = 16.5 kg
The net force, Fnet, must be equal to the mass of the suitcase, 16.5 kg, times the acceleration, 0.500 m/s^2, or 8.25 N.
Fnet = ma
8.25 N = 16.5 kg * 0.500 m/s^2
The net force, Fnet, will be equal to the force of the strap, F, minus the friction force, Ffriction, or 34.5 N - 20.0 N = 14.5 N.
Fnet = F - Ffriction
14.5 N = 34.5 N - 20.0 N
To find the angle, θ, at which the strap must be pulled, we can use the following equation:
Fnet = Fcosθ - Ffriction
14.5 N = 34.5 Ncosθ - 20.0 N
Solving for θ, we get:
θ = 0°
To learn more about force click here https://brainly.com/question/13191643
#SPJ4
complete question: A woman at an airport is towing her 16.5 kg suitcase at a constant speed by pulling on a strap at an angle θ above the horizontal (see figure). She pulls on the strap with a 34.5N force, and the friction force on the suitcase is 20.0 N. A woman holds the strap of a suitcase while pulling it to the right. The strap makes an angle θ measured counterclockwise from the horizontal. What If? If the woman still pulls on the strap with a 34.5 N force but wishes to accelerate the suitcase at a rate of 0.500 m/s2, at what angle (in degrees) must she pull on the strap? Assume that the rolling friction is independent of the angle of the strap
what is the mass in pounds of a human who weighs 51.35 kg?
A human who weighs 51.35 kg has a mass of 113.2 lb. The conversion formula for kilograms to pounds is in the explanation below.
The mass of a human who weighs 51.35 kilograms can be converted to pounds using the following formula:
1 kg = 2.204622 pounds.
Therefore, the mass in pounds of a human who weighs 51.35 kg can be calculated as follows:
Mass in pounds = 51.35 kg * 2.205 pounds/kg
= 113.2073397 pounds
So, the mass in pounds of a human who weighs 51.35 kg is approximately 113.2073397 pounds. That number then can be rounded up to 113.2 lb.
Learn more about pound mass at https://brainly.com/question/22599208
#SPJ11
which structural fragment would give rise to a characteristic triplet-quartet pattern in the 1h nmr spectrum? true or false?
The statement "A structural fragment with three adjacent non equivalent protons would give rise to a characteristic triplet-quartet pattern in the 1H NMR spectrum" is true.
This is because the three protons are magnetically coupled to each other, resulting in a triplet signal, and they are also coupled to a neighboring proton, resulting in a quartet signal.
The relative intensities of the triplet and quartet signals are in a 1:3 ratio, which is characteristic of this type of structural fragment.
To know more about spectrum here
https://brainly.com/question/19042165
#SPJ4
if an energy transfer takes place due to a temperature difference, the energy crossing the boundary of the system is in the form of . multiple choice question. pressure heat work mass momentum
If a temperature differential causes an energy transfer, heat is the form in which the energy travels across the system's border. Hence, the appropriate choice is (b).
When there is a temperature difference between two systems, heat energy can flow from the hotter system to the colder system. Heat is a form of energy that is transferred due to the difference in temperature between two systems. This energy transfer is caused by the random motion of the particles in the system. When there is a temperature difference between two systems, the particles in the hotter system have a higher kinetic energy than the particles in the colder system. This leads to the transfer of heat energy from the hotter system to the colder system, until both systems reach thermal equilibrium, i.e., they reach the same temperature and the net heat flow stops.
Therefore, when there is an energy transfer due to a temperature difference, the energy crossing the boundary of the system is in the form of heat.
To know more about energy please refer: https://brainly.com/question/26472013
#SPJ4
Question - If an energy transfer takes place due to a temperature difference, the energy crossing the boundary of the system is in the form of. Multiple choice question, choose one:-
(a) pressure
(b) heat
(c) work
(d) mass
(e) momentum
light is traveling from plastic into air. at the interface some of the light is reflected. how does the reflected wave compare to the incident wave?
When light travels from plastic into the air, some of the light is reflected at the interface between the two media. The reflected wave is characterized by a few key differences compared to the incident wave.
Firstly, the reflected wave is inverted with respect to the incident wave, meaning that it is flipped upside down.
Furthermore, the abundance of the reflected wave is by and large more modest than that of the occurrence wave.
This is because some of the energy of the wave is absorbed or scattered as it interacts with the interface between the plastic and air.
Lastly, the reflected wave is shifted in phase compared to the incident wave. The amount of phase shift depends on the angle of incidence and the refractive indices of the two media.
In summary, the reflected wave that occurs when light travels from plastic into the air is inverted, has a smaller amplitude, and is shifted in phase compared to the incident wave.
To learn more about incident waves:
https://brainly.com/question/29458046
#SPJ4
A person with a mass of 11.24 kg is accelerated to 9.15 m/s2. How much force was applied to him.
Answer:
102.846 Newtons
Explanation:
The equation relating mass, acceleration and force is
F = ma
where
F = force
m = mass
a = acceleration
Given
m = 11.24 kg
a = 9.15 m/s²
F = 11.24 kg x 9.15 m/s²
= 102.846 Newtons
Which one of the following properties most fundamentally distinguishes mechanical waves from electromagnetic waves? a. Mechanical waves have crests and troughs. b. Mechanical waves require a medium for propagation. c. Mechanical waves have well-defined wavelengths. d. Mechanical waves move at a finite speed.
The property that most fundamentally distinguishes mechanical waves from electromagnetic waves is that mechanical waves require a medium for propagation.
Mechanical waves are waves that propagate through a material medium, such as water, air, or a solid, and are caused by disturbances that propagate through the medium, such as vibrations or oscillations. This is in contrast to electromagnetic waves, which do not require a material medium and can propagate through a vacuum.
While mechanical waves do have crests and troughs, well-defined wavelengths, and move at a finite speed, these properties are not unique to mechanical waves and are also observed in electromagnetic waves. For example, electromagnetic waves also have crests and troughs, well-defined wavelengths, and move at a finite speed. However, they do not require a medium for propagation, which is the key difference between the two types of waves.
Learn more about electromagnetic waves here:
https://brainly.com/question/3101711
#SPJ4
45. Two football players collide. The offensive player, mass= 100, was running at
8. 00 m/s. A defensive player catches up to the offensive player from behind.
The defensive player was traveling 11 m/s when he tackled the other player.
a. What was the speed of the two players after the collision?
b. What impulse is felt by each player?
c. If the collision lasted 0. 05 seconds, then what was the force felt by each player?
You may use the impulse-momentum theorem to: Momentum shifts are impulses. It is known that the impulse is 0.05 Ns (1008+10011). As a result, each participant applied a force of 1008 + 10011 N split by 0.05.
What is the impulse momentum theorem's equation?P equals F net t. The equation is also known as that of the impulse-momentum theorem. F net t F net t is referred to as the impulse. According to the equation, the impulse is equal to the average force on an object times how long it takes for that force to act. It is equivalent to the momentum shift.
What is an example of the impulse momentum theorem?The usage of side airbags in cars is one such. In cars, air bags are employed because they may reduce the impact. of the force acting on a collision-involved item. Air bags make this possible by lengthening the length of time it takes so stop the driver and passenger's motion.
To know more about impulse-momentum theorem visit:
https://brainly.com/question/14121529
#SPJ1
the energy driving the global water cycle is provided by the energy driving the global water cycle is provided by tides. wind. rotation of the earth on its axis. solar energy.
The energy driving the global water cycle is primarily provided by solar energy.
The Sun's energy heats the Earth's surface, causing water to evaporate from the surface and form water vapor in the atmosphere.
This water vapor then condenses to form clouds and precipitation, which returns water to the surface and completes the water cycle. Solar energy is the primary driver of temperature differences across the Earth's surface, which in turn creates atmospheric circulation patterns that distribute heat and moisture. Tides are a result of the gravitational forces of the Moon and Sun on the Earth's oceans, and wind is a result of atmospheric pressure differences caused by uneven heating of the Earth's surface. While tides and wind can affect the distribution and movement of water in the oceans and atmosphere, they are not the primary source of energy driving the global water cycle.
Learn more about energy here:
https://brainly.com/question/29071039
#SPJ4
what is the value and the direction of an electric field at a distance of 2.5 m from a 1 nc charge?
The electric field strength is positive, which means that the direction of the electric field is radially outward from the charge.
What is an electric field?The electric field strength at a distance r from a point charge q is given by:
[tex]E = k*q/r^2[/tex]
where k is Coulomb's constant, which has a value of approximately[tex]9.0 x 10^9 N m^2/C^2.[/tex]
In this case, we have a point charge [tex]q = 1 nC = 1 x 10^-9 C[/tex] located at a distance r = 2.5 m.
Substituting these values into the equation above, we get:
[tex]E = (9.0 x 10^9 N m^2/C^2) * (1 x 10^-9 C) / (2.5 m)^2[/tex]
[tex]E = 1.44 x 10^-6 N/C[/tex]
The electric field strength is positive, which means that the direction of the electric field is radially outward from the charge.
Learn more about electric field, here:
https://brainly.com/question/8971780
#SPJ1
where would you expect terrestrial planets to form in the solar nebula?
You expect terrestrial planets to form in the solar nebula in the inner part of the protoplanetary disk.
The solar nebular disc theory proposes that rocky planets develop in the inner region of the protoplanetary disc, near the frost line, where the temperature is high enough to prevent the condensing of water ice and other components into grains.
As a result, only rocky grains coagulate, and later, rocky planetesimals are created. These circumstances are thought to exist in the inner 3–4 AU region of the disc of a star similar to the Sun.
According to the so-called nebular hypothesis for the origin of the solar system, the Sun and planets were formed by condensation from the solar nebula, a gaseous cloud.
Learn more about Terrestrial planets:
https://brainly.com/question/29577092
#SPJ4
assume steady-state, one-dimensional heat conduction through the axisymmetric shape. assuming constant properties and no internal heat generation, sketch the temperature distribution?
The actual temperature distribution will depend on the specific geometry and material properties of the axisymmetric shape
Based on the given assumptions of steady-state, one-dimensional heat conduction, constant properties, and no internal heat generation, we can expect the temperature distribution to have the following characteristics:
The temperature will vary only in the radial direction, perpendicular to the axisymmetric shape.
The temperature gradient in the radial direction will be constant, assuming that the thermal conductivity of the material is also constant
The temperature distribution will be symmetric about the axis of the shape.
The temperature at the center of the shape will be higher than the temperature at the outer surface.
Based on these characteristics, we can sketch the temperature distribution as follows:
-------------
/ \
/ \
/ \
| |
| T1 |
| |
\ /
\ /
\ /
-------------
R1
In this sketch, T1 is the temperature at the center of the shape, which is the highest temperature. R1 is the outer radius of the shape, and the temperature at the outer surface is assumed to be the lowest temperature. The temperature decreases linearly with increasing radial distance, and the temperature gradient is constant throughout the shape.
This sketch provides a general idea of what the temperature distribution might look like under the given assumptions.
For more such questions on heat conduction
https://brainly.com/question/16810632
#SPJ4
traction refers to the: a) amount of weight able to be towed b) grip of the tire on the road c) rating of the engine d) wind resistance of the car
Traction refers to the grip of the tire on the road.
The correct option is B.
The definition of traction is the strength with which something holds onto something and advances without slipping or tugging. A tyre is said to have strong traction when it glides over the road's surface easily and grips firmly.
It refers to the ability of the tire to maintain contact with the road surface and provide the necessary grip to accelerate, brake, and turn the vehicle. Factors that affect traction include the quality and condition of the tires, road surface conditions, and driving style.
adhesion between a body and a surface, such as a tyre on a road or a wheel on a rail.
For more such questions on Traction
https://brainly.com/question/27960120
#SPJ4
a banjo band radiates sound at a maximum loudness of 67.05 w. what is the intensity of these sounds waves to a listener 93.52 m from the band?
The intensity of the sound waves to a listener 93.52 m from the band is approximately [tex]6.75 *10^{-7} W/m^2[/tex].
The formula for sound intensity is:
[tex]I = P/(4\pi r^2)[/tex]
where I is the intensity of the sound, P is the power of the sound source, and r is the distance from the sound source.
In this case, the power of the banjo band is 67.05 W, and the distance from the listener to the band is 93.52 m. Substituting these values into the formula, we get:
[tex]I = 67.05 W/(4\pi(93.52 m)^2)[/tex]
Simplifying this expression, we get:
[tex]I = 6.75 *10^{-7} W/m^2[/tex]
Therefore, the intensity of the sound waves to a listener 93.52 m from the band is approximately [tex]6.75 *10^{-7} W/m^2[/tex]. This is a relatively low value, as the threshold of hearing for most humans is around [tex]1 * 10^{-12} W/m^2[/tex]. However, the actual loudness of the sound heard by the listener will also depend on the sensitivity of the human ear and other factors.
Learn more about sound intensity :
https://brainly.com/question/30101270
#SPJ4
the block in the image has a mass of 1.00 kg. the coefficient of static friction between the block and the inclined plane is 0.675. the plane makes an angle of 39o with the horizontal direction. what is the minimum force that can be applied to the block to keep it from sliding down the plane?
The minimum force that can be applied to the block to keep it from sliding down the plane is 6.06 N. Any force greater than this value will cause the block to move down the plane.
To find the minimum force required to keep the block from sliding down the inclined plane, we need to calculate the maximum force of static friction that can act on the block, which is equal to the force required to keep the block at rest.
The maximum force of static friction is given by:
[tex]F _{friction}[/tex] = friction coefficient x N
where N is the normal force acting on the block, which is equal to the component of the weight of the block that is perpendicular to the plane. This can be calculated as:
N = m * g * cos(theta)
where m is the mass of the block, g is the acceleration due to gravity, and theta is the angle of the plane with respect to the horizontal.
In this problem, m = 1.00 kg, g = 9.81 m/[tex]s^{2}[/tex], and theta = 39 degrees. We need to convert the angle to radians before we can use it in the equation, which gives:
theta = 39 degrees = 0.68 radians
Substituting these values into the equation for N, we get:
N = m * g * cos(theta) = 1.00 kg * 9.81 m/[tex]s^{2}[/tex] * cos(0.68) = 8.97 N
Now we can use the equation for the maximum force of static friction to find the minimum force required to keep the block at rest:
[tex]F _{friction}[/tex] = friction coefficient x N = 0.675 * 8.97 N = 6.06 N
for such more question on force
brainly.com/question/29512870
#SPJ4
which type of power source is typically located on or near customer facilities, requires little distribution infrastructure, and supplies power in the event of an interruption in power from the electric utility?
The type of power source that is typically located on or near customer facilities, requires little distribution infrastructure, and supplies power in the event of an interruption in power from the electric utility is called a "standby generator."
Standby generators are usually powered by natural gas, propane, or diesel fuel and are designed to automatically start up and supply electricity to critical loads in the event of a power outage. They are commonly used in commercial and industrial facilities, as well as in residential homes where power outages may cause significant inconvenience or even health and safety risks. Standby generators can be sized to provide backup power to an entire facility or only to specific critical loads, depending on the customer's needs and budget.
Standby generators are typically fueled by natural gas, propane, or diesel fuel, and can be sized to meet the specific power needs of the facility. They can be connected to the facility's electrical system through a transfer switch, which allows the generator to automatically switch on in the event of a power outage, and then switch back to utility power once it is restored. Standby generators are an important part of a facility's emergency preparedness plan, and can help ensure that critical operations are not interrupted during power outages.
Learn more about power here:
https://brainly.com/question/11800127
#SPJ4
If there is a positive and a negative charge near each other and they are moved farther apart, work must be done, and the result is storing electric potential energy. what would be a good analogy to this process in the case of gravity? explain your reasoning.
A good analogy to this process in the case of gravity is throwing a bowling ball up in the air.
What is analogy?Analogy is a figure of speech used to compare two different things that have similar characteristics in order to explain a concept or idea. It is a form of extended metaphor and can be used to draw a comparison between two objects, phenomena, or events to help explain something unfamiliar by associating it with something more familiar.
Work must be done by the person throwing the bowling ball, and as a result, potential gravitational energy is stored in the ball. As it goes higher and higher in the air, it has more potential energy, as it is farther away from the ground. Just like two charges that are moved farther apart storing electric potential energy, when a bowling ball is thrown up in the air, it gains gravitational potential energy due to being further away from the ground.
To learn more about analogy
https://brainly.com/question/29330820
#SPJ1
A 1000 kg car traveling South at 20.0 m/s collides with a 1200 kg car traveling East at 20.0 m/s. The
two vehicles entangle after the collision and head off as one. What is the velocity of the combined
wreckage immediately after the collision?
The velocity of the combined wreckage immediately after the collision is approximately 10.91 m/s to the East and 9.09 m/s to the South.
How to solve this problemFirst we can use the , which states that the total momentum of a system is conserved in the absence of external forces. In this case, the system is the two cars before and after the collision.
The total momentum of the system before the collision can be calculated as the vector sum of the momenta of the two cars, where the momentum of each car is the product of its mass and velocity:
P_total,before = P_car1 + P_car2
where
P_car1 = m_car1 * v_car1_south (momentum of the first car, traveling South)P_car2 = m_car2 * v_car2_east (momentum of the second car, traveling East)Substituting the given values, we have:
P_car1 = 1000 kg * 20.0 m/s * (-j) = -20,000 kg·m/s·j (using the South direction as the negative j direction)
P_car2 = 1200 kg * 20.0 m/s * i = 24,000 kg·m/s·i (using the East direction as the positive i direction)
Note that we are using a coordinate system where the x-axis is pointing East and the y-axis is pointing North, so the unit vectors i and j represent the East and North directions, respectively.
Thus, the total momentum of the system before the collision is:
P_total,before = -20,000 kg·m/s·j + 24,000 kg·m/s·i
= (-20,000 kg·m/s) j + (24,000 kg·m/s) i
After the collision, the two cars entangle and move as one object with a common velocity. Let's call this velocity v_combined. The momentum of the combined wreckage can be expressed as:
P_total,after = (m_car1 + m_car2) * v_combined
Substituting the given values, we have:
P_total,after = (1000 kg + 1200 kg) * v_combined
= 2200 kg * v_combined
According to the conservation of momentum, the total momentum of the system is conserved before and after the collision. Therefore, we can set the total momentum before the collision equal to the total momentum after the collision:
P_total,before = P_total,after
Solving for v_combined, we get:
v_combined = P_total,before / (m_car1 + m_car2)
Substituting the previously calculated values, we have:
v_combined = (-20,000 kg·m/s j + 24,000 kg·m/s i) / (1000 kg + 1200 kg)
= (-20,000/2200) m/s j + (24,000/2200) m/s i
= -9.09 m/s j + 10.91 m/s i
Therefore, the velocity of the combined wreckage immediately after the collision is approximately 10.91 m/s to the East and 9.09 m/s to the South.
Learn more about conservation of momentum here : brainly.com/question/7538238
#SPJ1
gootwo identical speakers are spaced 12 m apart, aimed toward each other. they each play a 171.5 hz tone with the same phase constant. if you stand at the center point between the speakers, what is the result of superposition of the sound waves from the speakers?
The speaker is construction interference is 0 and destructive interference is 0.5.
a) The Center point of speaker between the speakers of the sound waves from the speaker is construction interference is 0.
b) Condition of destructive interference path difference -x/2.
6 + x - 6 + x = x/2
2x = x/2
x=x/4
x=v/uρ
x=343 / 171.5 x 4
x = 0.5m from the midpoint
Construction interference refers to any type of obstacle or hindrance that interferes with the construction process. It can arise from a range of sources such as natural disasters, design deficiencies, unforeseen conditions, or third-party actions. When there is interference, it could result in project delays, increased costs, and reduced productivity.
Construction interference can be caused by several factors, including the site location, weather conditions, poor management, poor communication between team members, poor planning, and materials shortage. For instance, poor management could lead to the lack of coordination among the workforce, while poor communication between the team members could result in duplication of work or rework, leading to delays in the project schedule.
To learn more about Construction interferencevisit here:
brainly.com/question/16098226
#SPJ4
Complete Question:-
Two identical speakers are spaced 12 m apart, aimed toward each other. They each play a 171.5 Hz tone with the same phase constant. A. If you stand at the center point between the speakers, the result of superposition of the sound waves from the speakers is constructive inteference. Explain. B. How far must you move from the center toward one of the speakers in m to reach the next point of destructive interference?
an underwater vehicle has eightsensors, each having a 5 m range. the speed of sound in water is 1482 m/s. compute the frequency of measurement cycles, a cycle being one complete series of measurements from all eight sensors.
The frequency of measurement cycles is 148.2 Hz, a cycle being one complete series of measurements from all eight sensors.
Given the range of each sensor= 5m
The speed of sound in water = 1482m/s
Let the frequency cycles = n
The frequency of measurement cycles is based on the time it takes for sound waves to travel from each sensor to the vehicle and back.
The round trip time for each sensor is 2 x 5 m = 10 m, divided by the speed of sound in water, 1482 m/s. The result is [tex]6.73 * 10^{-3}[/tex]seconds or 6.73 milliseconds.
The frequency of measurement cycles is then [tex]1/6.73 * 10^{-3}[/tex], which is 148.2 Hz (cycles per second).
To learn more about frequency click here https://brainly.com/question/2140860
#SPJ4
An object has a force of 10 newtons from the right and 17 newtons from the left. Once the object starts moving toward the right, an additional force of 2 newtons is applied from the right. What can you conclude about the direction of motion of the object after the application of the additional force?
The conclusion about the direction of motion of the object after the application of the additional force is the object will not move in either the left or right direction, because the net force will be zero.
What is force?In physics, a force is an influence that can change the motion of an object.
The object initially encountered unbalanced forces of 10 N from the right and 17 N from the left, resulting in a net force of 7 Netwons, which caused the object to travel in the direction of the right.
The object ceased to move in either direction when a force of 7 Newtons was added from the right, as the net force decreased to zero, creating balanced forces from both directions.
Therefore, the object will continue to move with a constant velocity.
To learn more about force, refer to the link:
https://brainly.com/question/1423274
#SPJ9
The SI unit for force is 1 Newton= 1kg x 1 m/s2 (N). The SI unit for work is _ 1NM _______(J)
I need help with these two:)
W= F x D indicates the relationship between force, distance and work.
What is work?Work is defined as an activity in which one exerts force to do something. Work is also refers to an activity in which a person do something regularly to earn a livelihood. People looking for work, a particular task, duty, or assignment often being a part of some larger activity.
The definition of work in physics shows its relationship to energy. When work is done, energy is transferred from one place to another. Work is also known as the product of the force in the direction in which displacement is covered and displacement.
So we can conclude that Work is the product of Force and Distance.
Learn more about work here: https://brainly.com/question/25573309
#SPJ1
A 1.53 kg box is sliding to the right at a constant velocity of 15.44. If the box has a force 80.18 applied to the right, what is the magnitude of the force of friction?
1. a charge of -2.50 nc and a charge of -4.00 nc are placed 50.00 mm apart. find the resultant force on a charge of 8.00 nc placed 20.00 mm from the -2.50 nc charge and 30.00 mm from the -2.50 nc charge.
The resultant force on the 8.00 nC charge is -0.010 N.
Using Coulomb's law, the electric force between two point charges is given by,
F = k * (q1 * q2) / r^2
where F is the force, k is Coulomb's constant, q1 and q2 are the charges, and r is the distance between the charges.
The force on the 8.00 nC charge due to the -2.50 nC charge:
F1 = k * ((8.00 nC) * (-2.50 nC)) / (0.020 m)^2
= -0.090 N
Note that the negative sign indicates an attractive force, as the charges have opposite signs.
The force on the 8.00 nC charge due to the -4.00 nC charge,
F2 = k * ((8.00 nC) * (-4.00 nC)) / (0.030 m)^2
= -0.080 N
Add these forces vectorially. Since the forces are acting in opposite directions,
Fnet = F1 - F2
= -0.090 N - (-0.080 N)
= -0.010 N
To know more about the electric forces, here
brainly.com/question/2526815
#SPJ4
in a gas expansion, 87 j of heat is released to the surroundings, and the internal energy of the system decreases by 128 j. calculate the work done by the gas.
The work done by the gas is - 41 J.
As per the data given:
There is a gas expansion.
During this gas expansion 87 j of heat is released to the surroundings.
Heat = 87 j
Also the internal energy of the system decreases by 128 j.
Change in energy Δv = 128 j
Here we have to determine the work done by the gas.
Δv = Heat + work done by the gas
Work done by the gas = Heat - Δv
Work done by the gas = (128 - 87) J
= 41 J
As the the internal energy of the system decreases and gas is expanded so the work done by the gas will be negative.
Therefore Work done by the gas = - 41 J
For more questions on Work
https://brainly.com/question/29794226
#SPJ4
Find the time for a pulse of laser light to reach the Moon and to bounce back to Earth Express your answer to two significant figures and include the appropriate units
The time for a pulse of laser light to reach the Moon and to bounce back to Earth is 2.6 s.
What is a laser light?
A laser light is a light produced by a laser, which is a device that amplifies and emits light by the process of stimulated emission. Laser light is highly directional and has a narrow beam, making it useful for many applications such as cutting, drilling, and welding. It can also be used to measure distances, scan barcodes, and measure speed. Laser light has a high intensity and is monochromatic, meaning it contains a single wavelength of light.
The speed of light is approximately 3.0 x 10^8 meters/second. The distance from the Earth to the Moon is approximately 3.8 x 10^8 meters. Therefore, the time for a pulse of laser light to reach the Moon is approximately 1.3 seconds, and the time for the light to bounce back to Earth is also approximately 1.3 seconds. The total time for the pulse of laser light to reach the Moon and to bounce back to Earth is 2.6 s, to two significant figures.
Therefore, the time for a pulse of laser light to reach the Moon and to bounce back to Earth is 2.6 s.
To learn more about laser light the link
https://brainly.com/question/15594955
#SPJ1
It will take around 2.5 seconds for a pulse of laser light to reach the moon and bounce back to Earth.
What is Light?
Electromagnetic energy that can be seen by the human eye is known as light or visible light. [1] Typically, visible light is described as having wavelengths between 400 and 700 nanometers (nm), or frequencies between 750 and 420 terahertz, which fall between the longer-wavelength infrared and the shorter-wavelength ultraviolet (with shorter wavelengths).
There are 380,500 kilometres on average between the surface of the moon and the earth (km). In a vacuum, light, which is an electromagnetic wave, moves at a pace of about 3 x 108 m/s. The time it takes for a laser pulse to move from the earth to the moon is time = distance/speed because distance = speed*time. Round-trip duration is equal to 2*(distance/speed). Thus, time=2*(38500 x 103 m / 3 x 108 m/s) = 2.56 s is the result of the computation.
Therefore, A pulse of laser light will take around 2.5 seconds to reach the moon and bounce back to Earth.
To Learn more about Light from the given link
https://brainly.com/question/20259452
#SPJ1
A mineral, as geologists understand the term, is a naturally occurring solid substance with a definable chemical composition and:a fixed crystalline structure
Answer:
Explanation:
Yes, that is correct! A mineral, as defined by geologists, is a naturally occurring solid substance with a definable chemical composition and a fixed crystalline structure. This definition is based on the idea that minerals have a specific chemical composition and crystal structure that can be used to identify and classify them. The crystalline structure of minerals gives them unique physical properties, such as hardness, luster, and cleavage, that can be used to distinguish them from other substances.
