How does latency benefit the users?.

Answers

Answer 1

Generally low latency benefits the user because it provides real time closeness with least possible delays in transmitting data digitally, which means option C is correct.

Latency refers to the time lag which happens when a digital data is transferred from its origin location to the destination point. Low latency means that there will be less delay and this would mean the closeness between the digital speed and real time speed. High latency implies that there are many delays in data packet transmission. It is determined using the formula given below:

Latency = Propagation time = Distance to be covered / Propagation speed

Thus, low latency will enable quick processing and transfer of data across a network connection. It enables better online connection, calls and meetings.

Learn more about latency at:

brainly.com/question/30227967

#SPJ4

Refer to complete question below:

How does lower latency benefit the users connected to a network?

by expanding the range over which the network's signals are transmittedby enabling more devices to connect to the network at the same timeby reducing the delay when sending and receiving data between devicesby limiting network access to users with higher security credentials

Related Questions

A red cart ma = 2kg and a blue cart ma = 2 kg are ELASTICALLY crahed into each other at the indicated velocitie and bounce. After the colliion which cart will have the SMALLEST peed

Answers

The objects in an elastic collision split apart after impact while maintaining all of their kinetic energy. Kinetic energy, often known as the energy of motion, is discussed in more detail elsewhere.

How do you find the velocity of a bounce?

When the ball is not in contact with the ground, the formula h(t+t0)=v0t12gt2 determines the height at time t following the previous bounce at time t0. where v0 denotes the speed shortly before the bounce.

The mass of the red cart, m1, is equal to m1u1 + m2u2 = m1v1 + m2v2.

The blue cart has a mass of m2.

The red cart's starting speed is u1.

The blue cart's starting speed is u2.

The red cart's ultimate speed is v1.

The blue cart's ultimate speed is v2.

The final speed of each cart is determined by the formula: v1 = [m1u1 + m2u2 - m2v2] / m1

m1u1 + m2u2 - m1v1 = v2 / m2

As m1 = m2, our new equation is: v1 = u1 + u2 - v2.

v₂ = u₁ + u₂ - v₁

To learn more about collision refer to:

https://brainly.com/question/7221794

#SPJ4

Two 3. 0 g bullets are fired with speeds of 40. 0 m/s and 80. 0 m/s, respectively. What are their kinetic energies? which bullet has more kinetic energy? what is the ratio of their kinetic energies?.

Answers

For the first bullet, kinetic energy is 480 J and for the second bullet, kinetic energy is 1920 J.

What is kinetic energy?

Kinetic energy is the energy possessed by an object or a particle due to its motion. It is the energy of motion and can take many forms, such as the energy associated with an airplane flying through the air, a ball rolling down a hill, a person running, or a car traveling on a highway. In general, kinetic energy is the energy an object has because of its movement.

The kinetic energies of the two bullets can be calculated using the equation KE = (1/2)mv2, where m is the mass of the object and v is the velocity of the object.

For the first bullet, KE = (1/2)(3.0 g)(40.0 m/s)2 = 480 J.

For the second bullet, KE = (1/2)(3.0 g)(80.0 m/s)2 = 1920 J.

The second bullet has more kinetic energy than the first bullet. The ratio of their kinetic energies is 4:1. This means that the second bullet has four times more kinetic energy than the first bullet.

To learn more about kinetic energy

https://brainly.com/question/25959744

#SPJ4

What is Newton's 3 law example?.

Answers

One example of Newton's third law is when a person pushes against a wall.

The person exerts a force on the wall, and the wall exerts an equal and opposite force back on the person. Another example is when a baseball is hit with a bat.

The bat exerts a force on the baseball, causing it to move forward, and the baseball exerts an equal and opposite force back on the bat, causing it to move in the opposite direction.

The same applies to the action of a rocket taking off from the ground. The rocket exerts a force on the exhaust gases, pushing them out the back of the rocket and causing the rocket to move forward, and the exhaust gases exert an equal and opposite force back on the rocket, propelling it upward.

To learn more about Newton's 3rd law at

https://brainly.com/question/14967902?referrer=searchResults

#SPJ4

What applications need low latency?.

Answers

There are several applications that require low latency, including: online gaming, virtual reality, video conferencing etc.

Online gaming: Low latency is important for online gaming because it ensures that the player's actions are quickly and accurately reflected on the other players' screens.

Financial trading: High-frequency trading requires low latency to ensure that trades are executed quickly and accurately.

Virtual reality and augmented reality: Low latency is important for these technologies to ensure that the virtual world is in sync with the user's movements, providing a more realistic experience.

Video conferencing: Low latency is important for video conferencing to ensure that the audio and video are in sync and that there is no lag in the conversation.

Autonomous vehicles: Low latency is essential for self-driving cars to ensure that they can respond quickly and safely to their environment.

Streaming services: Low latency is essential for streaming services to ensure that users receive a smooth and uninterrupted experience.

These are just a few examples of applications that require low latency. In general, any application that involves real-time communication or control will require low latency to function properly.

To know more about low latency click here:

https://brainly.com/question/29781666#

#SPJ4

What process is used to move molecules across a cell membrane to space where the concentration of the molecules is higher?.

Answers

Diffusion is utilised to move molecules across cell membranes and into regions with higher concentrations. Every cell has a cell membrane, which is only partially permeable.

Molecules can enter and depart cells by active transport and diffusion, respectively. Water can move into or out of cells via osmosis. When chemicals pass via certain transport proteins and diffuse across the cell membrane, this happens. In probability theory and statistics, a class of continuous-time Markov processes known as diffusion processes is one that almost surely has continuous sample routes. Diffusion is utilised to move molecules across cell membranes and into regions with higher concentrations. Every cell has a cell membrane, which is only partially permeable. Brownian motion, Ornstein-Uhlenbeck processes, and reflected Brownian motion are a few examples of diffusion processes.

Learn more about molecules here

https://brainly.com/question/19922822

#SPJ4

acid rain is the result of pollutants being released into the

Answers

Acid rain is the result of pollutants being released into the air

What is acid rain ?

Acid rain is defined as rain or any other type of precipitation that is unusually acidic, which means it contains a lot of hydrogen ions. Acid rain has a pH level that is lower than this and typically ranges from 4-5. Most water, including drinking water, has a neutral pH that exists between 6.5 and 8.5.

When gases like sulphur dioxide and nitrogen oxides are released into the atmosphere, a chemical reaction takes place that eventually results in acid rain. These substances have the capacity to ascend to extremely high altitudes in the atmosphere, where they combine and interact with oxygen, water, and other chemicals to create acid rain, a type of ozone-depleting haze.

Learn more about Acid rain here:

https://brainly.com/question/22143130

#SPJ4

If you add 20g of ice at 0 degree celciu to 180g of water at 20 degree celciu, what i the final temperature of the water a all of the ice melt?

Answers

The combined water and melted ice temperature is 31.15°C.

We can use the following formula:

q = m c T is used to calculate the final temperature of the water and melted ice, where:

q = added or lost heat

m = the substance's mass

c = the substance's specific heat capacity

T = temperature change

Finding the heat that the ice has taken away:

(20g) x (2.1 J/g°C) x (0 - (-20))°C = q

q = 8400 J

Identifying the heat gained by water:

(180g) x (4.18 J/g°C) x (T) = q

Taking the heat lost by ice and converting it to the heat gained by water

(180g) x (4.18 J/g°C) x (T) = 8400 J

Trying to find T

T = 8400 J/(180g x 4.18 J/g°C).

ΔT = (8400/756)°C = 11.15°C

We get the final temperature by adding the initial temperature of the water to the temperature change.

T(f) = 20°C + 11.15°C = 31.15°C

As a result, the combined temperature of the water and melted ice is 31.15°C.

Learn more about specific heat capacity at : https://brainly.com/question/29766819

#SPJ4

A ball i thrown horizontally from the roof of a building 55 m tall with a peed of 3. 8 m/. How far from the building will it land?

Answers

If a ball i thrown horizontally from the roof of a building 55 m tall with a speed of 3. 8 m/ so the ball will land 55 m away from the building.

What is speed?

Speed is the rate at which something moves or occurs. It is usually measured in terms of distance over time. Speed can be expressed in many different forms, including miles per hour (mph), kilometers per hour (kph), meters per second (m/s) and even in terms of the speed of light. Speed is a measure of how quickly something moves in a specific direction.

The ball will land 55 m away from the building. This is because the horizontal velocity of the ball is 3.8 m/s, and the time it takes to travel 55 m is 55/3.8 = 14.47 seconds. Since the ball was thrown horizontally, it will travel a horizontal distance equal to the time it took multiplied by the velocity, which is 14.47 * 3.8 = 55 m.

To learn more about speed

https://brainly.com/question/13943409

Describe how a person would use a drinking straw to draw liquids​

Answers

A drinking straw can be used to draw liquids by following these steps:

Take the drinking straw and place one end into the liquid you wish to drink.

Hold the other end of the straw with your mouth, making sure that your lips create a tight seal around the end of the straw.

Using your mouth, suck the air out of the straw. This action creates a vacuum in the straw which in turn pulls liquid up through the straw and into your mouth.

It's important to note that the drinking straw should be inserted into the liquid to a depth that keeps the liquid level above the end in your mouth to avoid sucking in air bubbles.

What is the formula of torque Class 11?.

Answers

T is equal to F r sin. T is a torque. the linear force F. r is the measurement of the distance between the spin axis to the point at which a linear force is applied. torque

What exactly does torque mean?

Torque is a twisted or twisting force that frequently results in rotation around in an axis, which may be a fixed point or the center of mass. The capacity of something spinning, such as a cog or a shafts, to resist turning resistance is another way to think of torque.

What does the word "torque" mean and what does it mean graphically?

Although a capital "T" is typically used to represent torque, the true sign is indeed the Greek letter omega, or "." The letter "M" is used to denote torque when it is alluded to as a second of force.

To know more about torque visit:

https://brainly.com/question/28220969

#SPJ4

How many universal laws are there in the universe?.

Answers

The 12 universal laws are said to represent the underlying, unchangeable rules of our cosmos, which have always been instinctively understood by earlier civilizations.

Just one of the 12 fundamental laws, the rule of attraction can help us live lives that are more in harmony with our spiritual self by teaching us the other universal laws.

A traditional Hawaiian meditation performed to seek release, is commonly mentioned in connection with the rules. The hermetic philosophy of ancient Egypt has also been connected to some of the rules, though and "universal law".

Kaiser, Kumar, and several other individuals from all around the world continue to utilize the list of antiquated laws, demonstrating how well it has stood the test of time. The guidelines, according to Kaiser, are all about managing your life with love and joy.

To know more about laws on

https://brainly.com/question/28819655

#SPJ4

What is magnitude of 2i 3j 4k?.

Answers

The magnitude of 2i 3j 4k is 5.38 unit.

What is magnitude?

Magnitude is simply "distance or quantity" in physics. This representation can be used to show the motion of an item in absolute or relative terms, as well as its size change. It's a descriptive term for something's size or scope. Magnitude is a term used to describe length or size in physics.

To find the magnitude of a vector in three dimensional space, we can use this following formula:

∥a∥ = √ (x² + y² + z²)

In this case, we are given that:

X = 2, Y = 3, and Z = 4

Thus, the magnitude of the vector is:

∥a∥ = √ (2² + 3² + 4²)

∥a∥ = √29

∥a∥ = 5.38

To learn more about magnitude, click here:

https://brainly.com/question/30016405

#SPJ4

How does edge computing reduce latency for end?.

Answers

By transferring compute tasks to local devices, such as smartphones and laptops, rather than the cloud, edge computing minimises latency for end users.

With edge computing, customers may leverage their devices as a reliable computational resource at scale in addition to increasing agility and cost-effectiveness. Here are some ways that edge computing has made it such that consumers experience less latency.

There are several brand-new difficulties facing organisations in the era of big data. One significant obstacle is latency. Companies must analyse data more quickly as they gather more of it and store it in their systems. They must thus keep more data nearby their users. You may act more quickly the closer the data is. Making data more accessible to people through computers is one way businesses may reduce latency.

Learn more about Latency here:

https://brainly.com/question/14264521

#SPJ4

How is latency reduced?.

Answers

Using the CDN, the latency can be reduced as much as possible.

Using CDNs, the distance between the client making the request and the server responding to that request plays an important role. A CDN (Content Delivery Network) allows you to bring your resources closer to your users by caching them in multiple locations around the world. Network administrators have many tools to choose from for this, including Ping, Traceroute, and My Traceroute (MTR) which will cause the latency to reduce. Another thing this movie has in common with the quest for zero-latency monitoring is that both are myths. "Zero Latency" is just a marketing slogan someone came up with to get you to buy an audio interface.

Learn more about the latency in

https://brainly.com/question/29497697

#SPJ4

When testing the claim that p1 = p2, a test statistic of z = 2. 04 is obtained. Find the p-value obtained from this test statistic.

Answers

The upper test of 0.0414 is the p-value obtained from this test statistic.

P1P1 = P2P2

The above is the null hypothesis

The two-sided alternative hypothesis is:

P1P1 [tex]\neq[/tex] P2P2

"\=/" stands for "not equal".

Use the Z-Table or Z-Calculator to derive the p-value (probability value) for a Z-score of 2.04.

In the upper test,

2 × [probability z>2.04] = 2[0.0207] = 0.0414

This is the p-value for the test statistic.

The focus is on the alternative hypothesis.

So, final answer is that the upper test of 0.0414 is the p-value obtained from this test statistic.

Learn more about hypothesis

brainly.com/question/896413

#SPJ4

how would you describe the motion of plates in a transform boundary?

Answers

As the plates separate from one another, the transform boundary is described. Assume that two crusts are present and that they exactly line up from east to west. A plate drifts north, away from another plate.

What is the transform plates motion?

The transform fault, a third type of plate boundary, allows plates to slide past one another without creating or destroying crust. Rocks facing each other on two sides of the fault are typically of different type and age because they are cut and displaced by movement in the opposite direction.

Two plates collide at the transform plate boundary when they slide past one another horizontally. The San Andreas Fault, which causes a large number of earthquakes in California, is a well-known transform plate boundary.

To know more about transform boundary visit:

https://brainly.com/question/13311455

#SPJ4

His third law states that for every action (force) in nature there is an equal and opposite reaction. If object A exerts a force on object B, object B also exerts an equal and opposite force on object A

Answers

According to his third law, there is a equal and opposite response to every force (activity) in nature. If object A applies a force to object B, b will respond with an equal and opposing force.

Examples of the third law of Newton?

Newton's Third Law illustration Everyday life is full of instances of Newton's third rule of motion. For instance, when you leap, the force from your legs pushing against the ground is balanced by the opposite reaction force from the earth, which lifts you into the air. When creating rockets and other projectiles, engineers use Newton's third law.

Describe Newton's third law. Why does that matter?

The third law of movement by Newton states that equal but diametrically opposed energies always act in pairs. There is an opposite but equal reaction to every action, to put it another way. This means because when you push against a wall, the ceiling pushes back against you with an equal amount of force.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

the plates of a parallel-plate capacitor are connected to a battery. if the distance between the plates is halved, the energy of the capacitora. a. Increases by a factor of 4
b. Doubles
c. Remains the same
d. Is halved
e. Decreases by a factor of 4

Answers

A parallel-plate capacitor's energy is given as it is halved. in this case, Option C is correct.

Where are the capacitor battery's capacitance and emf?

a = U = 1 CUR

Capacitance is known to be equal to C and CRA. Capacitance = d = ac 2 Eu A = and the new capacitor's expat energy = U = clu2 = 2002 are calculated when the space between the plates is cut in half. 2 20 01 = 20. The energy of the capacitor doubles as a result.

Does the battery contain a capacitor?

A battery is an electronic device that transforms chemical energy into electrical energy to provide a static electrical charge for power, whereas a capacitor is an electronic component that stores electrostatic energy in an electric field.

To learn more about capacitor's energy  here:

brainly.com/question/13615988

#SPJ4

Who discovered cosmic microwave background radiation?

Answers

Cosmic microwave background radiation (CMB) was discovered by American physicists Arno Penzias and Robert Wilson in 1964.

What is radiation and who discovered it ?The discovery was made while they were working at Bell Labs in New Jersey.Penzias and Wilson were using a horn-shaped antenna to study radio waves coming from space.They noticed a faint, constant noise coming from all directions, which they couldn't explain.After eliminating all possible sources of interference, they realized that the noise was coming from the universe itself.They published their findings in the journal "Astrophysical Journal" in 1965, and their discovery was soon recognized as the CMB.They were awarded the Nobel Prize in Physics in 1978 for their discovery of the CMB, which is considered one of the most important pieces of evidence for the Big Bang theory.The discovery of CMB provided strong evidence in favor of the big bang theory, Penzias and Wilson's discovery was a direct confirmation of the big bang theory.

To lean more about radiation refer:

brainly.com/question/893656

#SPJ4

help needed fast, I'm not good at physics, look at picture below ( I posted another page aswell, take a look on my profile)​ part #2

Answers

Answer:

I’d say the air outside the hemisphere is more free than from the inside of the hemisphere.

Explanation:

hope this help!

A tudent pull a wagon 5 meter with a force of 19 Newton at an angle of 25 degree for 7 econd. What i the power output by the tudent?

Answers

The student is producing an output power of 6.43 Watts over the 7 second duration.

What is force?

Force is an influence that causes an object to change its motion, direction, shape, or other physical qualities. Forces can be caused by physical contact, or they can be created by fields like gravity and magnetism. Forces can also be internal, such as the forces of friction, tension, and compression.

The power output by the student can be calculated using the equation Power = Force x Distance/Time. In this case, the power output is equal to 19 x 5 / 7 = 6.43 Watts. This means that the student is producing an output power of 6.43 Watts over the 7 second duration.

To know more about force click-
https://brainly.com/question/12785175
#SPJ4

What is weight class 8?.

Answers

The Class 8 truck gross vehicle weight rating (GVWR) is a vehicle with a GVWR exceeding 33000 lb (14969 kg). These include tractor trailer tractors, single-unit dump trucks of a GVWR over 33,000 lb, as well as non-commercial chassis fire trucks; such trucks typically have 3 or more axles.

Determine the relationship between the melting point of an impure substance to that of a pure substance. A.The melting point of the impure substance compared to the pure substance cannot be determined. B. The melting point of the impure substance would be the same as that of the pure substance. C. The melting point of the impure substance would be higher than that of the pure substance. D.The melting point of the impure substance would be lower than that of the pure substance.

Answers

The melting point of impure substance is slightly lower than the melting point of the pure substance.

Melting point of a substance is that temperature at which substance begins to melt. In other words, the temperature at which the distance between the molecules of the substance begins to increase. When a substance is a mixer of two or more substance, then its called impure substance. Different type of substances have different coefficient of thermal expansions and different melting point.  So they begin to melt at slightly lower temperature than the melting point of one of the substance, This is due to the uneven expansion of the substance at the same temperature.

To know more about melting point, here

https://brainly.com/question/29578567

#SPJ4

Two charged objects are held 1 meter apart from each other. Then they are moved to 4 meters apart. How are the electrostatic force and gravitational force between them affected by this move?.

Answers

The electrostatic force and gravitational force will be one-sixteenth.

Gravitational force:  The force of attraction between any two bodies is

directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.

Electrostatic force:  The force of attraction between any two charges is

directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.

i.e. both the forces are inversely proportional to distance between them.

So, GF = EF ∝ [tex]\frac{1}{r^{2} }[/tex]

where r = distance between them.

When distance between objects are 1m , Both the forces are inversely proportional to 1.

When distance between objects are 4m , Both the forces are inversely proportional to 16.

So, the New forces becomes 1/16th of the original one.

To know more about forces visit:

https://brainly.com/question/30135363

#SPJ4

PLEASE HELP RN
A projectile is shot horizontally off a cliff at a speed of 44 m/s. It hits the ground 2 seconds
later.
How high is the cliff, in meters?

Answers

Distance from the base to cliff does it land is 41.4m,

What is distance?Distance is a measurement of how far away two things or locations are, either numerically or occasionally qualitatively. Distance can refer to a physical length in physics or to an estimate based on other factors in common use.Distance is the sum of an object's movements, regardless of direction. Distance may be defined as the amount of space an item has covered, regardless of its beginning or finishing position.A span is any distance between two objects. These end points may be concrete, like the length of a rope between two trees, or they could be more ambiguous, like the interval between five and six o'clock in the morning.

Given data :

Let’s review the 4 basic kinematic equations of motion for constant acceleration (suggest you commit these to memory):

s = ut + ½at^2 …. (1)

v^2 = u^2 + 2as …. (2)

v = u + at …. (3)

s = (u + v)t/2 …. (4)

where s is distance, u is initial velocity, v is final velocity, a is acceleration and t is time.

First, we find the time taken by the projectile to drop 84m. From equation (1):

84 = 0 + 0.5(9.81)(t^2) so t = √(84/4.905) = 4.14s

Next, we find the distance travelled in 4.14s at 10m/s, which is:

Distance = 4.14*10 = 41.4m

Completed question :

A projectile is thrown horizontally off of a 84 m high cliff at 10 m/s. How far away from the base of the cliff does it land?

Learn more about distance refer to :

https://brainly.com/question/26550516

#SPJ1

What is the relationship between speed and kinetic energy for kids?.

Answers

Answer:

they are kinda the same.

In what way does 5G improve on 4G in terms of connected users in a small space?.

Answers

Yes, 5G outperforms 4G in terms of connected consumers in a constrained area. quickly connected and over a network. Undoubtedly, a 5G phone will function on a 4G network.

Because a recent network upgrade just occurred. The fifth-generation technological standard used by the telecom sector is referred to as "5G." Along with other network technologies, the 5G mobile phone also supports 4G, 3G, and 2G. Despite the fact that 5G might be regularly utilised in the current 4G network environment, the experience is not as cool as 5G. 2019 saw the global rollout of broadband cellular networks by cellular phone operators. These networks support the first commercially available 5G mobile phone that supports 5G+4G dual-card dual-standby at the same time.

Learn more about network here

brainly.com/question/7600281

#SPJ4

What is the difference between dimension and dimension formula of a physical quantity?.

Answers

Dimension of a physical quantity are the power to which the basic dimension are raised to quantify that quantity. On the other hand, dimension formula is how and which basic quantities are included to represent the magnitude of the quantity.

Lets say we have a physical quantity "work". As the unit of work is joule which is equal to the kg-m²/s². This is the dimension of the work. But its dimension formula will be [ML²T⁻²].

As the formula of work is F × d × Sinθ.

[MLT⁻²]  is the dimension formula of force

[L] is the dimension of displacement

So, work's dimension formula will be [MLT⁻²] ×[L] = [ML²T⁻²]

To know more about physical quantity, here

https://brainly.com/question/26171158

#SPJ4

PLEASE HELP!!!! A 1500 kg high performance racecar can exert an average force of 15,000 Newtons to accelerate from o to 100 mph (45 m/s).
How much time will it take to reach this speed?

Answers

It will take 5x105 seconds to get to this pace.

What is speed and what is its unit in physics?

Speed refers to the rate at which a length varies over time. It has a time-distance dimension. The outcome is the High silica element of speed, which combines the fundamental time units and the fundamental measure of length. As a result, the SI unit for velocity is the metre per second, or m per s.

What does velocity vs. acceleration mean?

Velocity is the term for the rate of movement. The measurement of a velocity shift called acceleration. Given that it includes both magnitude and direction, it is a vector quantity. Due to the fact that it determines how quickly velocity changes, acceleration is just a vector quantity.

To know more about Speed visit:

https://brainly.com/question/28224010

#SPJ1

How do you find the magnitude and direction of displacement?.

Answers

Calculate the inverse tangent of the ratio of the displacement components in the y and x directions to determine the direction of the displacement vector. The magnitude of displacement is equal to the distance covered in a given interval of time if the particle moves at a constant or variable velocity in the same direction, because if it changes direction, the magnitude of displacement changes and does not remain equal to the distance covered.

A quantity with magnitude and direction must also follow certain combination rules in order to qualify as a vector. Vector addition, denoted symbolically as A + B = C, is one of these (vectors are conventionally written as boldface letters). Geometrically, the vector sum can be visualized by placing the tail of vector B at the head of vector A and drawing vector C so that it completes the triangle (starting from the tail of A and ending at the head of B). If A, B, and C are vectors, then it must be possible to reverse the operation and achieve the same result (C), B + A = C. This property (commutative law) is shared by quantities such as displacement and velocity, but there are some that do not (for example, finite rotations in a circle).

Learn more about magnitude here: https://brainly.com/question/24468862

#SPJ4

Other Questions
write the simplest polynomial function with the given zeros (use the math equation editor) and write out your answer in box below. Members of the student council have been working very hard to prepare the decorations Which of the following signs would require a drawn-out repeated movement?A).Make the bedB).To vacuumC).Every nightD).Need When the Federal Reserve wants to increase the supply of bank deposits in the system and hence the money supply, they _______ the level of required reserves. Can someone help me put this in order please? Every day you take the morning train to get to work 15 minutes before your shift begins. Today the train broke down and they think it will take an hour to get fixed. Define the problem for the situation above by selecting the best answer. What do we mean when we describe an organism as more fit than some other organism?. please help due TONIGHT!! GRADED /35 Dakota earned $10.50 in interest in Account A and $35.00 in interest in Account B after 21 months. If the simple interest rate is 3% for Account A and 5% for Account B, which account has the greater principal? Explain. Which account has the greater principal? Select the correct answer below and fill in the answer boxes to complete your choice. What is the mirror image of 4 20?. Julian is writing a report about the Constitution for his Social Studies teacher. His report is below. When the U.S. adopted the Constitution as the standard by which the nation would be run, it was unique. It based the government on a voting body instead of government based on the right of a king. The U.S. Constitution went on to be the model document for many other governments. What does make it unique is that it is the oldest document of its kind that is still in use and still works. This may seem totally screwed up since some others are basically copies of the U.S. Constitution. In the end, the model for a successful constitution takes more than just copying a piece of paper.5What would be a good way for Julian to change the sentence, "This may seem totally screwed up since some others are virtual copies of the U.S. Constitution," to make it better fit with the rest of his report? A. This may seem pretty wacky since some others are virtual copies of the U.S. Constitution. B. This may seem odd since some others are virtual copies of the U.S. Constitution. C. This may seem totally weird since some others are virtual copies of the U.S. Constitution. D. This may seem whack since some others are virtual copies of the U.S. Constitution. Consider a circle whose equation is x2 + y2 2x 8 = 0. Which statements are true? Select three options. The radius of the circle is 3 units. The center of the circle lies on the x-axis. The center of the circle lies on the y-axis. The standard form of the equation is (x 1) + y = 3. The radius of this circle is the same as the radius of the circle whose equation is x + y = 9. Question 6 of 10The kelp highway theory of early migration argues that the first humanstraveled: Where is the stress in iambic pentameter?. distinguishing between linear growth and exponential growth identify the type of function graphed to the right. linear exponential other graph What is the conflict between the men and the women in Trifles?. You are an entrepreneur in the process of purchasing a small business. You want your investment to be safe, so you need to select a business that can be classified as a small business so as to qualify for SBA financing and government contracts. Which of the following would qualify? A. A For-Profit commercial bakery with 475 employees. B. A Not-For-Profit hospital with 1,200 employees. C. A For-Profit architecture design business with 3-year average revenue of $9.2M. D. An Independently owned and Operated farm business with $900,000 in average revenue over 3-years. Question: Assume The Following Two Tables. Employee Table Has Three Fields: EmpID, EmpFname, EmpLname With 120 Rows And EmpSkills That Has EmpId, SkillID, And SkillDescription With 50 Rows. What Would Be The Result Of The Following SQL Statement: Select EmpFname, EmpLname, SkillDescription From Employee As Emp Right Outer Join EmpSkills AsAssume the following two tables. Employee table has three fields: EmpID, EmpFname, EmpLname with 120 rows and EmpSkills that has EmpId, SkillID, and SkillDescription with 50 rows. What would be the result of the following SQL statement:Select EmpFname, EmpLname, SkillDescriptionFrom Employee As Emp Right Outer Join EmpSkills As EmpsOn Emp.EmpID = Emps.Empida) The query will only return rows where the EmpID in both tables are equalb) The query will return all rows from Employee, matching rows from EmpSkills, and nulls for EmpSkills columns where there is no matchc) The query will return all rows from EmpSkills, matching rows from Employee, and nulls for Employee columns where there is no matchd) The query will return no rows What is the rate of change with respect to time Mcq?. most cool-season grasses have biennial life cycles. True or False