How does the diameter of a black hole (size of the event horizon) depend on the mass inside the black hole

The net force acting on the car is 65 N to the left

The net force acting on an object is simply defined as the resultant force acting on the object.

From the question given, we obtained the following data:

The net force acting on the car can be obtained as follow:

Fₙ = Fₗ – Fᵣ

Fₙ = 315 – 250

Therefore, the net force acting on the car is 65 N to the left

Learn more on net force: https://brainly.com/question/19549734

Since there is no friction, the net force on the car in the x - direction will be 65 Newtons

Given that Dave and Alex push on opposite ends of a car that has a mass of 875 kg.

Dave pushes the car to the right with a force of 250 N, which is positive direction and Alex pushes to the left with a force of 315 N which is negative direction. Since there is no friction, only the horizontal forces will be considered.

To calculate the net force on the car in the x-direction, we will find the difference between the two forces because of their directions are opposite to each other.

Net force = 315 - 250

Net force = 65 Newtons

Therefore, the net force on the car in the x - direction will be 65 Newtons

Learn more about resolution of forces here: https://brainly.com/question/11556949

Explanation:

F=m×a

m=2kg

a=4m/s^2

F=2kg×4m/s^2

F=8N

A 2 kg water balloon is flying at a rate of 4 m/s². Force with which balloon will hit its target is 8 Newton.

A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is body with some mass than there is force.

Given in the question mass and acceleration of balloon, force is given as

F = m*a

m = 2 kg

a = 4 m/s²

F = 2 kg×4 m/s²

F = 8 N

A 2 kg water balloon is flying at a rate of 4 m/s². Force with which balloon will hit its target is 8 Newton.

To learn more about force refer to the link:

brainly.com/question/13191643

 #SPJ5

they are converted into thermal and sound energy as well as the kinetic energy in the air

The maximum displacement angle of the bob is 13⁰.

The given parameters;

The maximum displacement of the bob is calculated by applying the principle of conservation of energy;

[tex]P.E = K.E\\\\mgh = \frac{1}{2} mv^2\\\\h = \frac{v^2}{2g} \\\\h = \frac{0.8^2}{2\times 10} \\\\h = 0.032 \ m[/tex]

The maximum displacement angle is calculated as follows;

[tex]cos \theta = \frac{L-h}{L} \\\\cos \theta = \frac{1.25 - 0.032}{1.25} \\\\\cos \theta = \frac{1.218}{1.25} \\\\cos \theta = 0.9744\\\\\theta = cos^{-1}(0.9744)\\\\\theta = 13\ ^0[/tex]

Thus, the maximum displacement angle of the bob is 13⁰.

Learn more here:https://brainly.com/question/13981780

Differences between earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges discussed in the answer.

When plates travel in the same direction and collide, this happens. The thinner, denser, and more flexible oceanic plate dips beneath the thicker, more rigid continental plate when a continental plate meets an oceanic plate. It's known as subduction.

Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction. The continent's undercut rocks start to melt. On occasion, a chain of volcanoes forms as the molten rock rises to the surface and passes through the continent. Nearly 80% of earthquakes happen along convergent borders, when plates are being forced together.

Shallow earthquakes, often less than 30 km deep, occur in small bands adjacent to plate borders along mid-ocean ridges and transform edges. There are earthquakes in subduction zones at various depths, some of which are more than 700 km deep. Because they occur everywhere throughout the subducting slab that stretches beneath the opposing plate, earthquake bands are wider along subduction zones. Wide areas of distributed earthquakes may be associated with collision zones between continents, such as those between the Eurasian plate and the plates to the south of the African, Arabian, and Indian tectonic arcs.

Learn more about earthquakes here:

https://brainly.com/question/29500066

#SPJ2

Answer:

I'm pretty sure it's false

Explanation:

.

Answer:

Explanation:

A wind is the horizontal movement of air from an area of high pressure to an area of lower pressure. Winds are caused by differences in air pressure. Most differences in air pressure are caused by unequal heating of the atmosphere

Answer:

3.07 kilometres per second

Answer:

[tex]\huge\boxed{\sf t = 40\ seconds}[/tex]

Explanation:

Given data:

Acceleration = a = 0.5 m/s²

Initial Velocity = Vi = 0 m/s

Distance = S = 400 m

Required:

Time = t = ?

Formulas used:

2 formulas

Solution:

Using third equation of motion firstly

2as = Vf²-Vi²

2(0.5)(400) = Vf² - 0²

400 = Vf²

Taking sqrt

Vf = 20 m/s

Now, Using First equation of motion:

Vf = Vi + at

20 = 0 + 0.5t

0.5 t = 20

Divide both sides by 0.5

t = 40 seconds

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

look on the bottom

Explanation:

Is it only the math or the physics/physical concepts that you don't get?

In this problem, you have a constant pressure of 1.00 atm.  This being the case, it is an isobaric system (constant pressure), and so you have the equation that work (W) = -pressure(P) x change in volume (∆V)

This is written as W = -P∆V and is known as pressure-volume work.

Now, understand the conventions that are used.

-If work is done ON the system, it has a positive sign (+)

-If work is done BY the system, it has a negative sign (-)

In this problem, the gas is being compressed, i.e. the volume decreases, and so work is being done ON the system. Thus, the sign of W is positive (+).  This comes out automatically because of negative sign in front of P∆V,                                                                                                                                                                                           So,                                                                                                                                       we have W = -P∆V and substituting values, we have

W = -(1.00 atm)(1.5L - 1.25L) = -(1.00 atm)(0.25L) = -0.25 L-atm

Converting this to joules, we get -0.25 L-atm x 101.3 J/L-atm = -25.3 J (note the negative sign)                                                                                                    Hope this all helps a little.

Answer:

A thought experiment is an experiment carried out only in the imagination

Explanation:

Answer:

typhoon forms when winds blow into areas of the ocean where the water is warm. These winds collect moisture and rise, while colder air moves in below. This creates pressure, which causes the winds to move very quickly. The winds rotate, or spin, around a center called an eye.

Answer:

yes

Explanation:

because it is a diverging mirror

Answer:

750 Newton

Explanation:

force=mass(acceleration)

Answer:

A team may contact the ball a total of three (3) times before it is sent over the net.

When you pedal a bike with chains attached to it, the wheel spins as you exert force from your body into the pedaling. The chains are connected to an almost circular shape.

Contrary to popular assumption, using machines does not result in more work being done. They merely alter the method of operation. Machines make work easier by increasing the amount of force used, extending the distance over which the force is exerted, or changing the direction of the force.

Simple machines are helpful because they lessen effort or enable humans to execute things that would normally be beyond their capacity. The wheel and axle, pulley, inclined plane, screw, wedge, and lever are examples of simple devices that are frequently employed.

To learn more about machine changes the way of work refer to:

https://brainly.com/question/902575

#SPJ2

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 5 × 10 = 50

We have the final answer as

Hope this helps you

Answer:

The thermosphere experiences a temperature increase primarily due to the absorption of gamma-rays and X-rays.

Answer:

e

Explanation:

It is possible to create a wave having some frequency on a rope and then gradually it will become faster. During this time wavelength becomes shorter. Here the wave 'e' is found to has highest frequency. The correct option is E.

The number of oscillations of a wave per unit time is defined as the frequency. It is usually measured in Hertz and the frequency is directly proportional to the pitch. Humans can hear sounds with frequencies ranging between 20-20000 Hz.

The sounds with frequencies over the human ears range are called the ultrasonic sound and sounds with frequencies less than the audible range are called infrasonic sound. The wavelength and frequency are inversely proportional to each other.

When wavelength increases, frequency decreases and vice versa. So here wave E has maximum number of vibrations.

Thus the correct option is E.

To know more about frequency, visit;

https://brainly.com/question/18125929

#SPJ2

Answer:

The greater the amplitude of a wave then the more energy it is carrying.

Explanation:

E is carrying the most energy which means that it has the highest amplitude

A has the least energy because it has the lowest amplitude

The power can be increased by decreasing the time it takes to load 10 items into the truck it can be done by using leverage and putting more boxes in the truck at the same time.

Power refers to the ability of doing work done per unit time, higher the power means more work has been done in less time. The SI unit of power is watt.

Work done is a physical quantity that refers to measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement.

Given:

10 people are loading 10 items in a truck

According to the question we have to maximize the power output.

To do this we need to increase work done per unit time. This can be done in a number of ways which include:

Using leverage and pulley techniques to increase the loading capacity of the individual, so that more work is done in less time and therefore increasing the power output of the work to be done.

The second method would be decreasing the time it takes to load the boxes into the truck which can be done if multiple boxes are loaded into the truck at the same time.

Therefore, the power can be increased by decreasing the time it takes to load 10 items into the truck it can be done by using leverage and putting more boxes in the truck at the same time.

Learn more about power here:

https://brainly.com/question/2289248

#SPJ9

Answer:

in a furnished room the furniture scatter the sound waves and it doesn't reach our ears in the same manner it left our mouth.

Answer:

4×2×3= 24dm^3

.......................

Answer:

B. 3 m

Explanation:

The position of the line at 3 seconds is 9 m and at 4 seconds is 12m .

Therefore; Displacement = 12 - 9 = 3 m

Answer:

For example, when a car travels at a constant speed, the driving force from the engine is balanced by resistive forces such as air resistance and friction in the car's moving parts. The resultant force on the car is zero.

Explanation:

hope this helps

Answer:

zero

Explanation:

The acceleration of the car is zero, and and in this case the velocity is also zero. When your car is moving at constant velocity down a street, the net force must also be zero, according to Newton's First Law.

Answer:

7.1 m/s

Explanation:

Explanation is attached

Answer:

I = 138.75N*s

Explanation:

I = F*t

I = Impulse or momentum

t = Time or duration

F = Force

I = 18,500N*0.0075s

I = 138.75N*s

Answer:

5235.84 kg

Explanation:

There is one theorem - whose proof I will never remember without having to drag calculus in there - that says that the variation of momentum is equal to the force applied times the time the application last.

[tex]F\Delta t = m \Delta v[/tex] As long as the engine isn't ejecting mass - at this point it's a whole new can of worm - we know the force, we know the variation in speed, time to find the mass. But first, let's convert the variation of speed in meters per second. The ship gains 250 kmh, [tex]\Delta v = 69.4 m/s[/tex];

[tex]45 450 \cdot 8 = 69.4 m \rightarrow m = \frac{45450\cdot 8}{69.4} = 5235.84 kg[/tex]

Answer:

The second deal.

Explanation:

I had that before, if u pick the second one you will get twice as much in a year as the first one.