The right description of the Parthenon is that it is based on a rectangle and features lofty columns leading to a gently sloping roof.
The Parthenon was built as a magnificent marble temple between 447 and 432 B.C., at the height of the ancient Greek Empire. The Acropolis of Athens, a group of connected temples, is home to the Parthenon, a temple dedicated to the goddess Athena. It was the largest and most lavish temple ever constructed on the Greek mainland. The Parthenon has been put through a lot over the years, including earthquakes, fires, conflicts, explosions, and looting. Despite this devastation, however, the Parthenon continues to serve as a compelling reminder of ancient Greece and Athenian civilization. One of the most famous buildings in the world and a constant reminder of ancient Greece, it is still in use today. When did the Parthenon fall?
Learn more about Parthenon here:
https://brainly.com/question/6039839
#SPJ4
1-14. (a) write the vo1 expression by inspection and solve for vo1 using a voltage divider. (b) write the vo2 expression by inspection and solve for vo2 using a voltage divider
I'm sorry, but the information supplied is insufficient for me to finish this task. The inquiry does not specify which circuit or values are being discussed. To solve for vo1 and vo2 using a voltage divider, I would need more information about the circuit, such as resistor values and input voltage. Could you possibly share additional details regarding the circuit in question?
Determine the head loss during backwash for a filter bed consisting of 0.6 m of sand with f = 0.45, 0.4 m gravel, and a pipe lateral under drain with a circular orifice having α = 0.8 and β = 0.05, Vb = 0.8 m/min.
The head loss during backwash for this filter bed is:
HL = (3.70ρVb2)/(2g[αf + β])
where ρ = density of the fluid (typically water), Vb = backwash velocity, g = acceleration due to gravity, α = orifice discharge coefficient, f = bed porosity, and β = orifice area ratio (orifice area / pipe lateral area).
For the given filter bed, the head loss is equal to:
HL = (3.70*1000*(0.8 m/min)^2)/(2*9.81*(0.8*0.45 + 0.05)) = 0.124m
The head loss during backwash is mostly due to friction loss as the water flows through the filter bed and friction loss is caused by the resistance to flow of the bed particles. The orifice is also a source of head loss due to the sudden expansion of the water from the pipe lateral to the orifice.
Write 5-6 lines of code to open a PrintWriter and write out the contents of the plants array into a text file named plants.txt
Here's an example of how you might open a PrintWriter and write out the contents of the plants array into a text file named plants.txt in Java:
String[] plants = {"Rose", "Tulip", "Lily", "Sunflower"};
PrintWriter writer = new PrintWriter("plants.txt", "UTF-8");
for (String plant : plants) {
writer.println(plant);
}
writer.close();
Here's an example of how you might open a PrintWriter and write out the contents of the plants array into a text file named plants.txt in Python:
plants = ["Rose", "Tulip", "Lily", "Sunflower"]
with open("plants.txt", "w") as file:
for plant in plants:
file.write(plant + "\n")
Please note that in Python, the "w" mode of the open function will truncate the file if it already exists and create a new one if it does not.
You can also use the append mode to add the new data to the existing file.
with open("plants.txt", "a") as file:
for plant in plants:
file.write(plant + "\n")
You can also use the writelines method to write out the contents of the plants array into the text file.
with open("plants.txt", "w") as file:
file.writelines("\n".join(plants))
Please note that the above code examples will create the text file in the same directory where the code is running. If you want to save the file in a specific directory, you will have to provide the full path of the directory in the filename.
A square steel tube of length L = 20 ft and width b2 = 10.0 in. is hoisted by a crane (see figure on the next page). The tube hangs from a pin of diameter d that is held by the cables at points A and B. The cross section is a hollow square with inner dimension b₁ = 8.5 in. and outer dimension b2 = 10.0 in. The allowable shear stress in the pin is 8,700 psi, and the allowable bearing stress between the pin and the tube is 13,000 psi Determine the minimum diameter of the pin in order to support the weight of the tube. (Note: Disregard the rounded corners of the tube when calculating its weight.)
The wires at positions A and B support a pin with a diameter of d from which the tube hangs. A hollowed square with an inner dimension of 8.5 inches makes up the cross section.
What is dimensions explain?In mathematics, a dimension is the length or width of an area, region, or region in one direction. It is just the measurement of an object's length, width, and height. In general, dimensions are written as follows: length, breadth.
What 3 dimensions do we have?We exist in a three-dimensional universe. The homes we live in and the items we use on a daily basis all have three components: length, length, and width.
To know more about dimension visit:
https://brainly.com/question/29581656
#SPJ1
a ? typically consists of a conductive link or links encapsulated in a tube for physical protection, which is packed with fine granulated filler (such as silica sand) and has a means for making electrical and mechanical connections when installed (typically either ferrule end caps or blades).
Unconsolidated sediments are frequently at their strongest when they are moist as a result of surface tension that is brought on by the little volumes of water around grain boundaries. Surface tension
Who doesn't respect boundaries?People with inadequate boundaries tend to fall into one of two categories: those who assume excessive responsibility for the feelings or actions of others and some who demand excessive responsibility from others.
Positive boundaries: what are they?being able to refuse requests and take rejection from others being able to express demands and wants clearly. recognizing and honoring their own needs as well as those of others. esteeming other people's values, views, and viewpoints despite the fact that they differ from one's
To know more about boundaries visit:
https://brainly.com/question/28924114
#SPJ4
Electronic leak detectors can only be used to detect CFCs.true or false
A leak of less than 0.1 oz per year can be accurately detected in higher end devices using an infrared sensor.
Using this cutting-edge technique, HFCs, CFCs, HCFCs, and HCFC-based refrigerant mixes can be easily recognized. An electronic leak detecting device locates leaks in industrial pipes, steam pipes, oil pipes, drains, water systems, toilets, and other liquid-transporting pipes. An electronic leak detector works on the basis of sound to find leaks in pipes. Explosive gas and carbon monoxide detector. A hybrid alarm that can detect both carbon monoxide and other explosive gases, such methane, propane, and other natural gases, is the best choice for finding dangerous gas leaks.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
Which of the following describes “fast track” construction?
The construction phase begins while the design and pre-construction phase is still underway.
The construction phase begins while the design and pre-construction phase is still underway.
A bidding process follows the design phase before construction begins.
A bidding process follows the design phase before construction begins.
A complex set of checks and balances strictly limits each role.
A complex set of checks and balances strictly limits each role.
Construction follows a definite sequence with each step concluding before the next begins.
Construction follows a definite sequence with each step concluding before the next begins.
Fast track construction is a method of accelerating a construction project's timeline by overlapping the design and construction phases.
Which of the following best describes construction that is "fast track"?Fast track construction is a construction process in which the construction phase begins while the design and pre-construction phase is still underway.This allows for a shorter design and construction timeline and reduces the overall cost of the project.In this process, a bidding process follows the design phase and a complex set of checks and balances are implemented to strictly limit each role.Construction follows a definite sequence with each step concluding before the next begins.This allows for flexibility in the timeline, allowing for changes to be made if needed.Fast track construction is often used when a project is time sensitive, or when cost savings are necessary.With this method, the design and construction phases overlap, which can save time and money for the overall project.It can also be beneficial for projects with tight deadlines, as it can help the project complete on time.To learn more about Fast track construction refer to:
https://brainly.com/question/16559409
#SPJ1
in ELI the ICE man refers to
Current [I] leads voltage [E] in an inductor [L] (that is the ELI portion), and voltage [E] leads current [I] in a capacitor [C] (that is the ICE part). This is what the phrase "ELI the ICE guy" refers to.
ELI the ICE man: What is it ?To keep in mind how current and voltage interact in an inductor and capacitor, think of ELI the ICE guy. Current [I] leads voltage [E] in an inductor [L] (that is the ELI portion), and voltage [E] leads current [I] in a capacitor [C] (that is the ICE part). This is what the phrase "ELI the ICE guy" refers to.
Mnemonic: ELI the ICE man It is a learning strategy that promotes memory retention, in other words.
So ELI the ICE man aids in helping us to remember that:
ELI: In a circuit with induction, voltage [E] precedes current [I].ICE: In a capacitive circuit (C), current [I] leads voltage [E].To learn more about ELI refer to:
https://brainly.com/question/12408026
#SPJ1
virginia law requires using headlights whenever the windshield wipers are in use.
That is correct. In the state of Virginia, it is required by law to use headlights whenever the windshield wipers are in use due to inclement weather conditions. This law is in place to ensure that drivers can see and be seen while driving in poor visibility conditions.
How to drive in poor visibility conditions?
When driving in poor visibility conditions, it's important to take extra precautions to ensure your safety and the safety of others on the road.
Some steps you can take include:
Slow down: reduce your speed to allow for extra time to react to changing conditions.Use headlights: turn on your headlights to increase your visibility and to make it easier for other drivers to see you.Keep a safe distance: increase the distance between you and the vehicle in front of you to allow for extra stopping time.Use windshield wipers and defrosters: keep your windshield clean and clear to improve visibility.Be prepared for sudden stops: be aware of the traffic around you and be prepared to brake quickly if necessary.Watch for pedestrians and bicycles: be extra cautious when approaching intersections and crosswalks, as visibility may be poor and it can be harder to see pedestrians and bicycles.Avoid sudden movements: avoid sudden movements, such as changing lanes or making turns, as it can be harder to judge distances and speeds in poor visibility conditions.Pull over if necessary: if visibility becomes extremely poor, it may be safer to pull over and wait for conditions to improve.It's important to remember that even when you are following all the safety guidelines, it's still hard to predict what other drivers may do, so always stay alert and drive defensively.
To learn more about poor visibility conditions, visit: https://brainly.com/question/18265875
#SPJ4
Q. 1. A sedimentation basin is to be designed so that it will remove 100% of all particles which have a settling velocity of 0.3 mm/s.
(a) For a flow of 10 m3/min, determine appropriate dimensions for a rectangular basin in which the length is 4 times the width.
(b) Determine the total weir length required.
Show in sketches.
Q. 2. Describe the effect you would expect with regard to solids removal if the basin of the Prob. Q. 1 was kept at a detention time of 2 h but made only half as deep. Why would this effect occur? What other factors might influence your choice of basin depth?
Answer:
he k do it ur go u is a little bit of time v be
A machine instruction Test-Set-Branch, TSB(x, L), where x is a memory location and L is a branch label, performs the following function in one instruction cycle:
if (x <== 0)branch to L else x = 0
Implement the Pb and Vb operations on binary semaphore using TSB ?
Binary semaphores are synchronization troglodytes that are used to safeguard shared resources and concurrent systems. They are implemented using the P (proberen) or V (verhogen) operations.,
What are the purposes of semaphores?Semaphores are widely used to synchronize access to resources. The initial semaphore count is set to the quantity of available resources. The counter is then atomic scale raised when new resources are provided and lowered when old resources are removed by threads.
What kind of signal is a semaphore?One of two methods is commonly employed with semaphores: between jobs, to limit the use of a common device. A excellent illustration is a printer. You build a binary because you don't want to send two tasks to the printing at once.
To know more about semaphore visit:
https://brainly.com/question/30030101
#SPJ4
What is the study of how organisms interact with each other and their environment?
Answer:
Ecology
Explanation:
a machine has three interlocking gears. gear a has 18 teeth and turns clockwise at 30 revolutions per minute. gear b turns counter-clockwise and has 36 teeth. gear c turns clockwise and has 9 teeth. how many revolutions does gear c turn in one minute?
Three gears on the machine are interlocked. Gear A rotates at 30 rotations per minute in a clockwise direction and contains 18 teeth. Gear B rotates anticlockwise x rotations, which is 8.25.
Which three major revolutions came first, in ordeThe first one is the Industrial Revolution, which started in the late eighteenth century; the second was the Demographic Revolution, which began in the late nineteenth; and the third, the Happiness Revolution, which began in the late twentieth century, is currently underway.
Calculation
Gear A turns clockwise and has 54 teeth
Gear B turns counterclockwise and has 36 teeth
gear A makes 5.5 rotations
One of the gears is driving the other hence the distance covered by each of the gears is constant.
The distance is the product of the number of rotations and the number of teeth and this should be a constant
Therefore, let the number of rotations of gear B be x
54 teeth * 5.5 rotations = 36 teeth * x rotations
x rotations = ( 54 teeth * 5.5 rotations ) / 36 teeth
x rotations = 54/36 * 5.5
x rotations = 1.5 * 5.5
x rotations = 8.25
To know more about revolutions visit:
https://brainly.com/question/28817926
#SPJ4
What is the capacitor current iC(t), in amperes, at time t=16 seconds in the given circuit.
RC Charging Circuit
When a voltage source is applied to an RC circuit, the capacitor, C charges up through the resistance, R
The charging of a capacitor is not instant as capacitors have i-v characteristics which depend on time and if a circuit contains both a resistor (R) and a capacitor (C) it will form an RC charging circuit with characteristics that change exponentially over time.
All Electrical or Electronic circuits or systems suffer from some form of “time-delay” between its input and output terminals when either a signal or voltage, continuous, ( DC ) or alternating ( AC ), is applied to it.
This delay is generally known as the circuits time delay or Time Constant which represents the time response of the circuit when an input step voltage or signal is applied. The resultant time constant of any electronic circuit or system will mainly depend upon the reactive components either capacitive or inductive connected to it. Time constant has units of, Tau – τ
When an increasing DC voltage is applied to a discharged Capacitor, the capacitor draws what is called a “charging current” and “charges up”. When this voltage is reduced, the capacitor begins to discharge in the opposite direction. Because capacitors can store electrical energy they act in many ways like small batteries, storing or releasing the energy on their plates as required.
T/F When possible, the planning team should build on existing assessments such Hazard Identification and Risk Assessments prepared by the States, major urban areas, and other government entities.
True, the planning team should, if possible, build on previous analyses, such as Hazard Identification and Risk Assessments created by States, significant urban regions, and other governmental bodies.
A continuous urban area (UA) is one that has at least 50,000 residents. It consists of one or more locations—the centre location(s)—and the nearby, densely populated surrounding area, or urban fringe, which is made up of other locations and nonplace territory. All people, homes, and land that are not located in an urban area are referred to as "rural." A census block that satisfies the minimum housing unit density and/or population density standards will constitute an urban area for the 2020 Census. Cities are described with the word urban. There are many people who live and work in cities. Cities are heavily populated commercial centres where leading a fast-paced lifestyle is frequently the norm. Urban areas include places like Atlanta and New York City.
Learn more about urban regions here
https://brainly.com/question/26672924
#SPJ4
8.10 An important problem in structural engineering is that of finding the forces in a statically determinate truss (Fig. P8.10). This type of structure can be described as a system of coupled linear algebraic equations derived from force balances. The sum of the forces in both horizontal
Finding the stresses and reactions connected to a standardized scale truss is a significant structural engineering problem.
What Is the Definition of an Electrical Force?Electric force is the attracting or repulsive contact in between two charged things. Similarly to any force, Newton's motion laws describe how it affects the target body and how it does so.
What exactly are electric force and electric field?The electrical force per unit of charge is referred to as the electric field. It is assumed that the field's direction corresponds to the pressure it would apply to a positive charge. From a positive point charge, the electric field radiates outward, and from a negative point charge, it radiates in.
To know more about forces visit:
https://brainly.com/question/30216682
#SPJ4
A technician configures a new printer to be accessible via a print server. After setting up the printer on a Windows client machine, the printer prints normally. However, after setting up the printer on a macOS client machine, the printer only prints garbled text. Which of the following should the technician do to resolve this issue
The technician should add a macOS-compatible print driver to the printer object on the print server to resolve the issue. The correct option is A.
What is a device driver?In computing, a device driver is a piece of software that administers or regulates a specific type of device that is connected to a computer or automaton.
Every piece of hardware, from internal computer components like your graphics card to external peripherals like a printer, requires a driver.
Therefore, the correct option is A. Add a macOS-compatible print driver to the printer object on the print server.
To learn more about device driver, refer to the link:
https://brainly.com/question/15637359
#SPJ1
The question is incomplete. Your most probably complete question is given below:
A. Add a macOS-compatible print driver to the printer object on the print server
B. Configure the Windows client to share the printer with the macOS client
C. Set the printer on the macOS client to connect to the print server via IPv6
D. Ensure the network time of the macOS client matches that of the print server.
You want to implement a fault tolerance topology as you connect routers on your wide area network. Which of the following topologies meet your needs ?
Redundancy for a broken link is provided via mesh network topologies. Network topology can be used to define or describe a variety of telecommunication networks
The topology of a communication network describes how its elements are set up. Network topology can be used to define or describe a variety of telecommunication networks, including industrial fieldbuses, computer networks, and command and control radio networks. Studying network topology allows one to recognize the eight basic topologies that include point-to-point, bus, star, ring or circular, mesh, tree, hybrid, and daisy chain. The star, mesh, tree, ring, point-to-point, circular, hybrid, and bus topologies are a few examples of physical network topologies. These networks are made up of various configurations of nodes and linkages. Studying network topology allows one to recognize the eight basic topologies which include point-to-point, bus, star, ring or circular, mesh, tree, hybrid, and daisy chain.
Learn more about Network topology here:
https://brainly.com/question/29743051
#SPJ4
You have been hired by a homeowner to install a ceiling fan and light kit in a living room. The living room luminaire (light fixture) being used at the present time contains two 60-W lamps. After locating the circuit in the panel box, you find that the circuit is protected by a 15-A circuit breaker and is run with 2.5mm² copper wire. After turning on all lights connected to this circuit, you have a current draw of 8.6 A and a voltage of 120V. The ceiling fan light kit contains four 60-W lamps, and the fan has a maximum current draw of 1.6 A. Can this fan be connected to the existing living room circuit? Recall that a continuous-use circuit should not be loaded to more than 80% of its rated capacity.
Answer:
No, you cannot add the ceiling fan to the circuit.
Explanation:
120V/60W=0.5A (V/W=A)
0.5A*4=2A (you have 4 60W lamps)
2A+1.6A=3.6A
3.6Ax0.125=0.45A (continuous load appliances must have amperage rated at 125% according to USA NFPA 70)
0.45A+3.6A=4.05A
4.05A+8.6A=12.65A
Assuming all devices on the circuit are ON, there would be a total current draw of 12.65A (after adding the ceiling fan). 80% of 15A is 12A.
Write a set of instructions to prompt the user for an int value and input it using the Scanner class into the variable x and prompt the user for a double value and input it using the Scanner class into the variable y.
Write a statement using a Scanner method to get the your first name, interactively.
Scanner scan = Scanner.create(System.in);System.out.println("Enter an integer");int x = scan.nextInt( );System.out.println("Enter a float");float y = scan.nextFloat( );
A BufferedReader can provide user input in the following manner: You must import these items. InputStreamReader inp = new InputStreamReader(System.in); BufferedReader br = new BufferedReader(inp); name as a string = br. readline(); System.in is more difficult to read user input without the Scanner class and instead requires the InputStreamReader to translate data from bytes to characters. To do this, supply an InputStreamReader's function Object() { [native code] } Java's System.in, then pass it to the BufferedReader. When prompted, the user inputs an integer value. With the aid of the nextInt() function from the Scanner Class, this value is obtained from the user. The next integer value is read into the provided variable in Java using the nextInt() function.
To learn more about Scanner scan click the link below:
brainly.com/question/17370146
#SPJ4
true/false. When the robot reaches the gray square, it turns around and faces the bottom of the grid. Which of the following changes, if any, should be made to the code segment to move the robot back to its original position in the bottom-left square of the grid and facing toward the bottom of the grid
Because the head point is to the left and is at location 0,3, the second grid. Alternative A, C, and F will all be incorrect if part B is correct.
The way a grid functions?A grid is a pattern of intersecting lines or bars. It acts as a blueprint for dividing up and organizing a space. Lines that intersect at right angles and are equally spaced apart make up a two-dimensional grid. Grids can be used to order and organize information.
calculation
Since the initial if statement, calling move #1: direction = left, turtles moves right, at location (2, 3). Second time, turtle travels forward, direction = right, position (2,4), head right, Third attempt, left direction, turtle pointing a. Position ( 1, 4), Moving ahead and pointing up for the fourth time, at position 0,4. five times.
To know more about grid visit:
https://brainly.com/question/28685106
#SPJ4
For the diagram below, assume fracking has not been used with the oil and gas well.The figure presents a diagram of 6 rock layers that contain oil and natural gas. Beginning at the bottom and moving upwards, the rock layers are as follows. Rock layer D is at the bottom, and rock layer C is directly above it. Oil is located in the upper portion of rock layer C, and natural gas, or C H 4, is located directly above the oil, still in rock layer C. Rock layer B is located directly above rock layer C, and it contains the same type of rock as layer D. Moving upward, the next two rock layers are unlabeled. Rock layer A lies at the top, and it contains the same type of rock as layers B and D. A well has been drilled down into the area of natural gas, or C H 4.Rock layer that can be porous but must have very low to no permeability
Rock layer that can be porous but must have very low to no permeability is Clay.
What is clay?In sedimentary rock, clay is a typical ingredient. The most typical of sedimentary rocks is shale, which is primarily formed from clay. Most clay deposits, though, are impure. Both clay and silt are present in numerous naturally occurring deposits. The size and mineralogy of clays are different from those of other fine-grained soils.
The size of the particles in silts, which are fine-grained soils devoid of clay minerals, is generally greater than that of clays. However, there is some overlapping with regard to particle size and other physical characteristics.
Each discipline has its own way of defining silt and clay. Since clays are finer than silts, geologists and soil scientists usually believe that separation occurs at a particle size of 2 m, while sedimentologists frequently use 4-5 m and colloid chemists use 1 m.
Learn more about clay
https://brainly.com/question/1023696
#SPJ4
1. Create a Virtual Hard Drive a. In Disk Management, click Action in the menu bar and click Create VHD. Follow directions on screen to create the VHD, specifying its location on the hard drive and its size. You can make the size dynamically expanding. The VHD is listed as a Disk in the Disk Management window. b. Right-click the new disk and click Initialize Disk. Use the GPT/MBR partitioning system for the disk.
Click Create VHD under Action in Disk Management's menu bar. To build the VHD and set its position on the hard disk, follow the on-screen instructions.
The hard drive is what?The physical device that houses all of our digital stuff is a hard disk. Digital stuff that is kept on a hard drive includes your papers, photos, music, videos, applications, application selections, and operating system. There are internal and external hard drives.
What does a 1 TB hard drive cost?1,000 megabytes (GB) or one trillion bytes (TB) are equivalent (MB). Now let's contrast that with the actual storage devices that we utilize every day. internal Memory of storage is equivalent to around 16 (64 GB) Samsung Galaxy or iPhones when compared to the typical smartphone.
To know more about Hard Drive visit:
https://brainly.com/question/27125234
#SPJ4
Please solve all the problems.
Answer:
1.true
2.false
Explanation:
i hope it's correct
When the lightning (electric current) hit the cage that Bill Nye was in, it turned the cage in to a kind of... *
Dams harness the power of falling water to generate electricity for residential use.
When the bass is loud enough, the sound energy transforms into kinetic energy, making the floor move. A portion of the energy that changes forms always escapes as heat. When you turn on the electricity and the lamp, it occurs. There are six different types of energy: nuclear, chemical, electric, radiant, and mechanical. Various searches might turn up mentions of other kinds, such electrochemical, acoustic, and electromagnetic. The primary source of energy for the production of electricity is fossil fuels. Electrons are drawn to or pushed away by a moving magnetic field. The electrons in metals like copper and aluminium are slackly held. Electrons are forced into the wire and produce an electric current when a magnet is rotated around a coil of wire or the other way around.
Learn more about Electrons here:
https://brainly.com/question/28915468
#SPJ4
The flat belts are moving at the speeds shown. Plot both the velocity profile within the oil film and the shearstress distribution. The pressures at A and B are atmospheric. Take mo
Shear stress values and the velocity profile are v=0.4m/s,
t=45 N/m^ 2
Explanation:
A) Velocity profile=0.6m/s, and 0.2m/s
relative velocity=0.6m/s-0.2m/s
v=0.4m/s
∵ thickness=4 mm
t=4x10^ -3m
B) Shear stress t=R v/t
=0.45x0.4/4x10^-3
t=45 N/m^ 2
Shear velocity, also known as friction velocity, is a way to express a shear stress in velocity units. Comparing actual speeds, like the flow in a stream, to ones that reflect shear between layers of flow is a useful technique in fluid mechanics.
Due to its close connection to earthquakes and the downslope movement of earth materials, the resulting shear has a significant impact on nature. Either solids or liquids can experience shear stress.
Using equation, one can determine the shear velocity.
U*= √r/p in the general case.
INCOMPLETE QUESTION:
The flat belts are moving at the speeds shown. Plot both the velocity profile within the oil film and the shear stress distribution. The pressures at A and B are atmospheric. Take u^0=0.45N.s/m2 and P^0=920KG/M3
To learn more about velocity
https://brainly.com/question/18084516
#SPJ4
.
Which part should be tested? O Flame sensorO Expansion valve O Solenoid valve O Gas valve
The correct response is a. Flame sensor. Flame sensor should be tested.
The flame sensor, which is a brief, thin metallic rod, generates a modest electrical current to signal whether a flame is burning inside the furnace. The current moves from the sensor to detect the heat from a flame as the gas valve opens to initiate combustion. An essential safety component of your gas heating system is a flame sensor. Your gas furnace will really ignite the gas during the ignition cycle using a spark or a hot surface ignitor. A current of electricity is produced by the flame sensor as the gas is ignited. If your furnace doesn't have a flame sensor, it will continue to release gas even when nothing is there to ignite it, which can lead to dangerous gas accumulation.
Learn more about sensor here
https://brainly.com/question/28068549
#SPJ4
what is the maximum amount of baggage that may be loaded aboard the airplane for the cg to remain within the moment envelope?
The correct response is 105 pounds, according by the information provided in the question.
Contrast an aeroplane with an airplane?Although the terms "plane" and "aeroplane" are synonymous, the British form is used. In addition to airplanes, anything that can fly is referred to as a "aircraft," including helicopters and hot air balloons.
What is the airplane bathroom called?A small space on board an airplane containing a toilet and sink is known as an aviation lavatory or plane toilet. They are common on passenger flights, with the exception of a few short-haul ones. Aircraft previously had chemical toilets, but most of them now have vacuum flushing systems.
To know more about airplane visit:
https://brainly.com/question/29889972
#SPJ4
while developing a new type of bearing that was meant to replace a recalled model, a minor quality issue was discovered. the bearings should have a diameter of 23 mm, with a /-1 mm tolerance. a few bearings have been found to deviate from these limits. which diagramming tool can be used to determine the work process's accuracy?
Control chart diagramming tool can be used to determine the work process's accuracy.
What is Control chart ?The control chart is a graph used to study how a process changes over time. Data are plotted in time order. A control chart always has a central line for the average, an upper line for the upper control limit, and a lower line for the lower control limit. These lines are determined from historical data.
What are the main purposes of control charts?Control charts show if a process is in control or out of control. They show the variance (or variation) of process output over time. Control charts compare this variance against upper and lower limits to see if it fits within the expected, specific, predictable and normal variation levels.
To know more about control charts visit:
https://brainly.com/question/28022940
#SPJ4
The rate at which your home consumes electricity is measured in kilowatts. If your home consumes electricity at the rate of 1 kilowatt for 1 hour, you will be charged for 1 "kilowatt-hour" of electricity. Suppose that the average consumption rate for a certain home is modeled by the function C(t) = 3.9 - 2.4 sin (πt/12), where C(t) is measured in kilowatts and t is the number of hours past midnight. Find the average daily consumption for this home, measured in kilowatt-hours.
If your home consumes electricity at the rate of 1 kilowatt per 1 hour, you will be charged for 1 "kilowatt-hour" of electricity.
To learn more about 1 "kilowatt-hour" of electricity please click the below link.
https://brainly.com/question/9993543
#SPJ4
