The photoelectric effect is a phenomenon in which electrons are emitted from a metal surface when it is exposed to light. This effect was first observed by Heinrich Hertz in 1887.
According to classical physics, light is a wave and should cause the electrons in the metal to vibrate, eventually causing them to be ejected from the surface. However, experimental data showed that the number of electrons emitted from the metal was proportional to the intensity of the light, but not its frequency.
Einstein proposed that light has both wave-like and particle-like properties, and that the photoelectric effect could be explained by the particle-like nature of light. He suggested that light is composed of discrete packets of energy called photons, and that the energy of each photon is directly proportional to its frequency.
To know more about photoelectric effect visit:-
https://brainly.com/question/26465043
#SPJ11
Two charged objects have a repulsive force of 0.080 N. If the distance separating the objects is tripled, then what is the new force?
According to the question the new force between the two charged objects is 0.0089 N.
What is force?Force is a physical influence that can cause an object to change its motion, direction, shape, or stress. It can be described as a push or pull that acts upon an object, causing it to accelerate, decelerate, or change direction. Force can also be used to cause a change in an object's shape or stress. Forces can be caused by interactions between objects, or they can be applied directly to an object by external sources. Examples of external sources of force include gravity, friction, and electromagnetic fields. Force can also be produced by the internal motion of an object, such as a spinning wheel or a vibrating string.
The force between two charged objects is inversely proportional to the square of the distance between them. This means that if the distance is tripled, the force between them will decrease by a factor of 9. Therefore, the new force between the two charged objects is 0.0089 N.
To learn more about force
https://brainly.com/question/12970081
#SPJ4
query.libretexts.org the height, , in feet of an object launched straight up after seconds can be represented by . what is the average velocity of the object between one and two seconds after it is
Based on the given information, we can represent the height of the object launched straight up after seconds as h(t) = -16t^2 + vt + h0, where v is the initial velocity and h0 is the initial height.
To find the average velocity of the object between one and two seconds after it is launched, we need to calculate the total displacement and divide it by the total time.
The displacement of the object between one and two seconds can be found by subtracting its height at time t=2 from its height at time t=1.
So, h(1) = -16(1)^2 + v(1) + h0 = -16 + v + h0
h(2) = -16(2)^2 + v(2) + h0 = -64 + 2v + h0
Therefore, the displacement between one and two seconds is:
h(2) - h(1) = (-64 + 2v + h0) - (-16 + v + h0)
= -64 + 2v + h0 + 16 - v - h0
= -48 + v
The total time between one and two seconds is 2-1=1 second.
Therefore, the average velocity of the object between one and two seconds after it is launched is:
Average Velocity = Displacement/Time
= (-48 + v)/1
= v - 48
So, the average velocity of the object between one and two seconds after it is launched is v - 48 feet per second.
The height, h(t), in feet of an object launched straight up after t seconds can be represented by h(t) = -16t² + vt + s, where v is the initial velocity in feet per second and s is the initial height in feet. To find the average velocity of the object between one and two seconds after it is launched, follow these steps:
1. Calculate the height at t = 1 second: h(1) = -16(1)² + v(1) + s
2. Calculate the height at t = 2 seconds: h(2) = -16(2)² + v(2) + s
3. Find the difference in height between the two times: Δh = h(2) - h(1)
4. Divide the difference in height by the time interval (2 - 1) to find the average velocity: Average Velocity = Δh / (2 - 1)
Following these steps, you can determine the average velocity of the object between one and two seconds after it is launched.
To know more about Velocity visit:
https://brainly.com/question/17127206
#SPJ11
20.0g of ice at 0C is added to 55.0g of water at 25C. How many grams of ice have melted once thermal equilibrium has been reached? What is the temperature of the system once thermal equilibrium has been established? The heat of fusion o face is 333.5J/g
Once thermal equilibrium is reached, 20.0 g of ice have melted.
The temperature of the system once thermal equilibrium has been established is 0°C.
To solve this problem, we can use the formula for heat transfer:
q = m * c * ΔT
where q is the heat transferred, m is the mass of the substance, c is the specific heat of the substance, and ΔT is the change in temperature.
First, we need to find the amount of heat required to melt the ice:
q1 = m * ΔH
where ΔH is the heat of fusion of water (333.5 J/g).
q1 = 20.0 g * 333.5 J/g = 6670 J
Next, we need to find the amount of heat required to raise the temperature of the water:
q2 = m * c * ΔT
where c is the specific heat of water (4.18 J/g·°C) and ΔT is the change in temperature.
q2 = 55.0 g * 4.18 J/g·°C * (25°C - 0°C) = 57370 J
The total amount of heat transferred is the sum of q1 and q2:
q = q1 + q2 = 6670 J + 57370 J = 64040 J
This heat transfer causes the ice to melt completely, and the temperature of the system to reach 0°C. Therefore, 20.0 g of ice have melted and the temperature of the system is 0°C.
TO KNOW MORE ABOUT thermal equilibrium CLICK THIS LINK -
brainly.com/question/31270337
#SPJ11
Determine the resistance of a 6-in. Pcb land of width 5 mils at 1 mhz and at 40 mhz. [0. 59 v, 0. 776 v]
The resistance of the PCB land at 1 MHz is 0.108 Ω and at 40 MHz is 0.829 Ω.
To determine the resistance of a PCB land, we need to know the following
The dimensions of the land
The resistivity of the material
The frequency of the signal passing through the land
Assuming the land is rectangular in shape with a length of 6 inches (152.4 mm) and a width of 5 mils (0.127 mm), and is made of copper, we can use the following formula to calculate the resistance
R = ρL/Wt
Where R is the resistance, ρ is the resistivity of copper (1.68 × [tex]10^{-8}[/tex]Ω·m), L is the length of the land (152.4 mm), W is the width of the land (0.127 mm), and t is the thickness of the copper layer on the PCB (assumed to be 1 oz or 35 µm).
Substituting these values, we get
R = (1.68 × [tex]10^{-8}[/tex]Ω·m) × (152.4 mm) / (0.127 mm) / (35 µm)
= 0.108 Ω
At 1 MHz, we can assume that the skin depth is much smaller than the thickness of the copper layer, and therefore the resistance remains the same.
At 40 MHz, the skin depth becomes significant and the resistance increases due to the skin effect. The skin depth for copper at 40 MHz is approximately 1.19 µm. Assuming the current flows only through the top surface of the copper layer, the effective thickness of the copper layer can be calculated as
t' = 2 × skin depth = 2 × 1.19 µm = 2.38 µm
Substituting this value in the formula, we get
R' = (1.68 × [tex]10^{-8}[/tex]Ω·m) × (152.4 mm) / (0.127 mm) / (2.38 µm)
= 0.829 Ω
Therefore, the resistance of the PCB land at 1 MHz is 0.108 Ω and at 40 MHz is 0.829 Ω.
To know more about resistance here
https://brainly.com/question/14687598
#SPJ4
82) A heat pump with a performance coefficient (COP) of 4.9 absorbs heat from the atmosphere at a rate of At what rate is work being done to run this heat pump?
A) 6 kW
B) 142 kW
C) 113 kW
D) 35 kW
B) 142 kW. The rate of work done is equal to the rate of heat absorbed divided by the coefficient of performance (COP): [tex]W = Q/COP = 7/0.049 = 142 kW.[/tex]
The answer is found using the formula W = Q/COP, where W is the rate of work done, Q is the rate of heat absorbed, and COP is the coefficient of performance. Substituting the given values, we get W = 7/4.9 = 1.428 kW. However, the question asks for the rate of work done in kW, so we need to convert 1.428 kW to kW, which gives us 142 kW. Therefore, the answer is B) 142 kW. In a heat pump, work is done to move heat from a low-temperature source to a high-temperature sink. The coefficient of performance (COP) is the ratio of the amount of heat moved to the amount of work done. A higher COP means that more heat is moved per unit of work done, which is more efficient. In this case, the heat pump has a COP of 4.9, which means that for every 1 kW of work done, 4.9 kW of heat is moved. So, to find the rate of work done, we divide the rate of heat absorbed by the COP.
learn more about coefficient of performance (COP) here:
https://brainly.com/question/28175149
#SPJ11
The force of friction does not depend onthe normal force pressing the two surfaces togethersurface area the bumpiness of the surfaces
The force of friction is a force that resists the relative motion of two surfaces that are in contact with each other.
What is friction?Friction is a force that resists motion when two objects come into contact with each other. It is a force that acts in the opposite direction to the motion of the objects and is generated by the objects rubbing against each other. Friction is the force that opposes the motion of two objects when they interact. It is a type of contact force that is created when two surfaces rub against each other. It is what causes the objects to slow down or stop when they come into contact with each other. Friction is an essential force in everyday life, from the brakes in a car to the shoes that we wear to walk.
It is determined by the coefficient of friction between the two surfaces, which is a measure of their relative roughness, and the normal force pressing the two surfaces together. The force of friction does not depend on the surface area or the bumpiness of the surfaces.
To learn more about friction
https://brainly.com/question/24338873
#SPJ4
If the speed of a wave doubles as it passes from shallow water into deeper water, its wavelength will be a) unchanged b) halved c) doubled d) quadrupled
If the speed of a wave doubles as it passes from shallow water into deeper water, its wavelength will be unchanged.
What is speed?Speed is a measure of how quickly an object or person moves or acts. It is usually measured in terms of distance traveled per unit of time, such as meters per second, miles per hour, or kilometers per hour. Speed can also refer to the rate at which something happens, such as the speed of a chemical reaction or the speed of a computer processor. In physics, speed is related to velocity, which is the rate at which an object changes its position.
The speed of a wave is determined by the depth and shape of the water, but the wavelength is determined by the frequency of the wave. Therefore, when the speed of the wave doubles as it passes from shallow water into deeper water, the wavelength will remain the same.
To learn more about speed
https://brainly.com/question/4931057
#SPJ4
Studded snow tires can be used during what months of the year?
Studded snow tires can be used during the winter months.
The use of studded snow tires is usually regulated by state or local laws. In general, studded snow tires are designed for use on snowy or icy roads and can provide better traction in those conditions. As such, they are typically allowed to be used during the winter months, when snow and ice are more prevalent. However, the specific months during which studded snow tires are legal can vary depending on the location and local regulations. It is important to check with the local authorities to determine when studded snow tires can be used in a particular area.
Studded snow tires are tires designed for use in winter conditions, particularly on icy and snowy roads. They have metal studs embedded in the tread that provide extra traction on slippery surfaces. However, they can damage roads and are prohibited in some areas during certain times of the year. The exact regulations for studded snow tires vary by location, so it's important to check local laws and guidelines before using them. In general, studded snow tires are legal during winter months or during specific winter weather conditions, such as when roads are covered in snow or ice.
To know more about snow tires, please click on:
https://brainly.com/question/19955035
#SPJ11
What is the relationship between a magnetic field & an electric current?.
The relationship between a magnetic field and an electric current can be described using these terms: magnetic field, electric current, electromagnetism, and the right-hand rule.
A magnetic field is a region around a magnet where magnetic forces can be felt. An electric current is a flow of electric charge, typically through a conductor such as a wire.
The relationship between a magnetic field and an electric current is described by the concept of electromagnetism.
When an electric current flows through a conductor, it generates a magnetic field around it. This phenomenon is known as the magnetic effect of current or electromagnetism.
The direction and strength of the magnetic field produced by an electric current can be determined using the right-hand rule. If you point your thumb in the direction of the current flow and curl your fingers around the conductor, your fingers will point in the direction of the magnetic field lines.
In summary, the relationship between a magnetic field and an electric current is based on electromagnetism, where an electric current flowing through a conductor generates a magnetic field around it. The right-hand rule can be used to determine the direction and strength of the magnetic field produced by the electric current.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
What planet is the observatory telescope viewing currently?.
To optimize viewing of Jupiter, Lowell Observatory will point several of its stunning public telescopes at the so-called King of the Planets.
Telescopes at observatories are used to study a variety of astronomical objects, such as planets, stars, and galaxies. The choice of which planet or celestial body to view depends on the research interests of the astronomers, the position of the object in the sky, and the observatory's location on Earth.
Astronomers create a viewing schedule that takes into account the visibility of specific planets at different times of the year, as well as the need to share the telescope's time with other researchers. As Earth orbits the Sun, the position of planets in the sky changes, so the observatory may focus on a specific planet during the period when it is best visible.
In summary, the planet being viewed by an observatory telescope varies depending on numerous factors, such as the research interests, location of the observatory, and the current positions of planets in the sky.
Learn more about Observatory here:
https://brainly.com/question/28274193
#SPJ11
A ray of light in water (index n
1) is incident on its surface (with air) at the critical angle.
Some oil (index n
2) is now floated on the water. The angle between the ray in the oil
and the normal is:
A.sin-1(1.00)
B.sin-1(1/n1)
C.sin-1(1/n2)
D.sin-1(n1/n2)
E.sin-1(n2/n1)
The angle between the ray in the oil and the normal is sin-1(1/n2)
Define critical angle.
The critical angle is the largest angle that a light ray traveling through a transparent media can make contact with the surface of another medium having a lower refractive index without being completely reflected inside the first medium.
An incident ray is a rectilinear light beam that strikes a surface and is referred to as an incident ray at that location. The angle of incidence is the angle formed by this beam and the normal or perpendicular to the surface. While the angle of reflection is the angle formed by the reflected ray and the normal line.
To learn more about refractive index use:
https://brainly.com/question/83184
#SPJ4
FILL IN THE BLANK. Two identical capacitors are connected in series and two, each identical to the first, are connected in parallel. The equivalent capacitance of the series connection is ________ the equivalent capacitance of parallel connection. A.twice B.four times C.half D.one fourth E.the same as
The equivalent capacitance of the series connection is one fourth the equivalent capacitance of parallel connection.
What is parallel connection?Parallel connection is a type of electrical connection where multiple components or wires are connected in parallel with each other. This type of connection allows the components or wires to be powered independently from the same source. It also allows each component to share the load between them and to draw the same amount of current from the source.
This is because when capacitors are connected in series, their equivalent capacitance is less than the individual capacitance, and when connected in parallel, their equivalent capacitance is greater than the individual capacitance. Since the capacitors are the same, the equivalent capacitance of the series connection is one fourth the equivalent capacitance of the parallel connection.
To learn more about parallel connection
https://brainly.com/question/82566
#SPJ4
17) A large vat contains 1.000 L of water at 20°C. What volume will this water occupy when it is heated up to 80°C? Water has a volume expansion coefficient of 210 × 10-6 K-1.
A) 1.600 L
B) 1.013 L
C) 0.987 L
D) 0.9987 L
According to the question the volume of water at 80°C is 1.000 L + 0.6 L = 1.600 L.
What is temperature?Temperature is a physical property of matter that reflects the average kinetic energy of its molecules. It is measured in units such as degrees Celsius (°C), Fahrenheit (°F) and Kelvin (K). Temperature is an important indicator of the state of a system, as it is directly related to the average kinetic energy of molecules. For example, when the temperature of a material increases, the motion of its molecules also increases, resulting in higher energy.
The volume expansion coefficient of water is 210 x 10-6 K-1, so the increase
in volume due to the increase in temperature from 20°C to 80°C is (80-20) x 210 x 10-6
= 0.6 L.
Therefore, the volume of water at 80°C is 1.000 L + 0.6 L
= 1.600 L.
To learn more about temperature
https://brainly.com/question/27944554
#SPJ4
How was space travel made possible through the invention of transistors?.
Transistors themselves did not directly enable space travel, their invention revolutionized electronics, paving the way for the development of compact, efficient, and reliable electronic systems that played a vital role in making space travel a reality.
The invention of transistors itself did not directly make space travel possible, but it played a crucial role in the development of the technology that made space travel feasible.
Transistors are fundamental components of electronic devices and are widely used in various fields, including aerospace engineering.
To learn more about the Transistors, follow the link:
https://brainly.com/question/30335329
#SPJ12
what is the meaning of the frequencies n 1 and n 2 ? in which frequency ranges are they situated compared to visible light?
The frequencies n 1 and n 2 refer to the frequencies of two different waves or signals. These frequencies can be situated in various ranges, depending on the context. However, in the context of visible light, n 1 and n 2 are likely referring to frequencies outside of the visible light spectrum.
Visible light ranges from approximately 400-700 nanometers, which corresponds to a frequency range of approximately 430-750 THz. Frequencies outside of this range would be considered non-visible, such as infrared or ultraviolet light. Without more information, it is impossible to determine the specific frequencies or ranges of n 1 and n 2.
The meaning of the frequencies n1 and n2 refers to two distinct frequencies in the electromagnetic spectrum. These frequencies can be associated with different types of waves, such as radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.
To determine the frequency ranges of n1 and n2 compared to visible light, you need to know the specific values of these frequencies. Visible light falls within a frequency range of approximately 4 x 10^14 Hz to 8 x 10^14 Hz. If n1 and n2 fall within this range, they are considered part of the visible light spectrum. If their values are lower or higher than this range, they belong to different parts of the electromagnetic spectrum.
To know more about frequency visit:
https://brainly.com/question/31026181
#SPJ11
A student must determine a nonzero change in momentum of an object for a specific interval of time. Which of the following experiments could the student conduct? Select two answers. Drop a ball of known mass above a motion detector, and record the final speed of the ball before it reaches the motion sensor. Drop a coffee filter of known mass from a known height above a motion sensor, and record the terminal speed of the coffee filter as it falls. Pull a block of known mass across a rough surface with a spring such that the block travels at a constant speed for 5 s as measured by a stopwatch. Record the force necessary to pull the block at a constant speed. Give a block of known mass an initial velocity so that it slides across a rough surface in front of a motion detector, slows down, and eventually stops. Use the motion detector to record the initial velocity of the block.
Drop a known mass ball above a motion detector and record the ball's ultimate speed before it reaches the motion sensor.
What is motion sensor?A motion sensor is an electronic device that detects and triggers a response to movement or changes in an environment. It is commonly used in security systems to detect intruders, in lighting systems to turn lights on when motion is detected, and in other applications such as robotics, gaming, and industrial automation. Motion sensors work by detecting motion in a specific area and sending a signal to a control panel, which then triggers a response in the form of an alarm, lights, or other actions. Motion sensors come in a variety of shapes, sizes, and sensitivities and are designed to detect motion from a variety of sources.
Give a known-mass block a beginning velocity that causes it to slide across a rough surface in front of a motion detector, slow down, and eventually halt. Use the motion detector to capture the block's starting velocity.
To learn more about motion sensor
https://brainly.com/question/30576730
#SPJ4
the escape velocity of the earth is about 11 km/s. the sun has an escape velocity of 600 km/s. a neutron star can have an escape velocity of 150,000 km/s. what is the escape velocity at the event horizon of a black hole? group of answer choices 150,000 km/s 600,000 km/s (2x the speed of light) 300,000 km/s (the speed of light) 200,000 km/s 450,000 km/s (1.5x the speed of light)
The escape velocity at the event horizon of a black hole is 300,000 km/s, which is the speed of light.
The escape velocity is the minimum velocity required for an object to escape the gravitational pull of a celestial body. It is directly proportional to the mass of the celestial body and inversely proportional to the distance from the center of the body. The escape velocity at the event horizon of a black hole is calculated using the formula v = √(2GM/r), where G is the gravitational constant, M is the mass of the black hole, and r is the radius of the event horizon.
The event horizon is the point of no return, beyond which nothing, not even light, can escape. Given the mass of a black hole, the event horizon can be calculated, and then the escape velocity can be determined. For a black hole, the escape velocity at the event horizon is approximately 300,000 km/s, which is the speed of light.
To know more about the escape velocity visit:
https://brainly.com/question/3454178
#SPJ11
74) An air conditioner with a coefficient of performance of 3.50 uses 30.0 kW of power to operate. What power is it discharging to the outdoors?
A) 30.0 kW
B) 75.0 kW
C) 105 kW
D) 135 kW
E) 210 kW
135 kW power is it discharging to the outdoors. The power output of an air conditioner is given by COP multiplied by the power input.
The power output of an air conditioner is given by COP multiplied by the power input. Here, COP is 3.50 and the power input is 30.0 kW. Therefore, the power output is 3.50 × 30.0 kW = 105 kW. The power discharged to the outdoors is the difference between the power input and the power output. Hence, it is 30.0 kW - 105 kW = 135 kW. Therefore, the correct answer is (D) 135 kW.
To learn more about Power click here
https://brainly.com/question/287674
#SPJ11
how is the double slit pattern different from that of the single slit? are the locations of the minima of the single slit still present in the pattern of the double slit? why do you think this is so?
The double slit pattern differs from the single slit pattern in terms of interference and distribution of light.
In a single slit pattern, diffraction occurs, resulting in a central bright fringe surrounded by alternating dark and bright fringes with decreasing intensity. This is due to the interaction of light waves from different parts of the slit, with constructive and destructive interference determining the fringe locations.
In contrast, the double slit pattern exhibits both diffraction and interference, with light waves from two separate slits interacting. This results in a complex pattern, where a series of bright and dark fringes are created by the overlapping of the two individual single slit patterns. The bright fringes in a double slit pattern are more sharply defined and equally spaced, while the dark fringes are narrower.
The locations of the minima (dark fringes) in the single slit pattern are not precisely the same as those in the double slit pattern. This is because the double slit pattern involves an additional level of interference between the light waves from the two slits. Consequently, the double slit pattern exhibits a combination of the single slit patterns, with new minima and maxima locations arising from their interaction.
Thus, the double slit pattern differs from the single slit pattern due to the combined effects of diffraction and interference from two slits, resulting in a more complex and distinct fringe distribution.
Learn more about double slit pattern here:
https://brainly.com/question/14914432
#SPJ11
The relation θ
incident = θreflected, which applies as a ray of light strikes an interface
between two media, is known as:
A.Faraday's law
B.Snell's law
C.Ampere's law
D.Cole's law
E.none of these
The relation θ
incident = θreflected, which applies as a ray of light strikes an interface
between two media, is known as: Snell's law.
What is Snell's law?Snell's law is a mathematical equation developed by Dutch physicist Willebrord Snell in the 17th century. It states that the ratio of the sines of the angles of incidence and refraction of a light ray passing through two different media is equal to the ratio of the velocities of light in those media. In other words, when light passes from one medium to another, the angle of refraction is directly proportional to the angle of incidence. This law is used to calculate the refractive index of a material, which is a measure of how fast light is travelling through it. It is also used in optical lenses and other optical devices to determine the paths of light rays entering and leaving the device. Snell's law is fundamental to the understanding of how light behaves when it passes through different materials.
To learn more about Snell's law
https://brainly.com/question/28747393
#SPJ4
what is icm , the moment of inertia of the disk around its center of mass? you should know this formula well.what is icm , the moment of inertia of the disk around its center of mass? you should know this formula well.
The moment of inertia, denoted as I, is the measure of an object's resistance to rotational acceleration. It depends on the shape, mass distribution, and orientation of the object. For a thin, uniform disk rotating around its center of mass, the moment of inertia can be calculated using the formula Icm = (1/2)mr^2, where m is the mass of the disk and r is the radius of the disk.
The moment of inertia of a thin, uniform disk rotating around its center of mass is given by the formula Icm = (1/2)mr^2, where m is the mass of the disk and r is the radius of the disk.
In summary, the moment of inertia is the measure of an object's resistance to rotational acceleration. For a thin, uniform disk rotating around its center of mass, the moment of inertia can be calculated using the formula Icm = (1/2)mr^2.
To know more about Icm visit
https://brainly.com/question/29130341
#SPJ11
we have seen that the generation of magnetic fields requires both a rapid rotation and a fluid interior for the flow of currents of charged particles. but neutrons are electrically neutral, so how can a neutron star generate a magnetic field?
Although neutrons are electrically neutral, neutron stars can still generate magnetic fields through a process called the "neutron star dynamo".
The neutron star dynamo is driven by the rapid rotation of the neutron star, which generates electric currents in the surrounding plasma. These currents, in turn, generate a magnetic field.
While charged particles are necessary for the generation of magnetic fields through the traditional dynamo mechanism, the neutron star dynamo is able to generate magnetic fields even in the absence of free charged particles. This is because the strong magnetic fields of the neutron star can induce current flow in the neutron star's interior, where the neutrons themselves become magnetized.
In summary, while the traditional dynamo mechanism relies on charged particles for the generation of magnetic fields, the neutron star dynamo is able to generate magnetic fields through the induction of current flow within the neutron star itself.
To know more about magnetic field visit:
https://brainly.com/question/14848188
#SPJ11
electrons in a photoelectric-effect experiment emerge from a copper surface with a maximum kinetic energy of 1.10 ev . part a what is the wavelength of the light? express your answer in nanometers.
The wavelength of the light in the photoelectric-effect experiment is 1126.72 nanometers.
The maximum kinetic energy of the electrons in the photoelectric-effect experiment is given by the equation KE = hf - Φ, where KE is the maximum kinetic energy of the electrons, h is Planck's constant, f is the frequency of the light, and Φ is the work function of the copper surface.
Since the maximum kinetic energy is given as 1.10 eV, we can convert it to joules using the conversion factor 1 eV = 1.602 x 10^-19 J. Thus, 1.10 eV = 1.77 x 10^-19 J.
We can then rearrange the equation KE = hf - Φ to solve for the frequency of the light, which is given by f = (KE + Φ) / h. The work function of copper is typically around 4.7 eV, so we can convert it to joules as well to get Φ = 7.55 x 10^-19 J.
Substituting the values we have, we get f = (1.77 x 10^-19 J + 7.55 x 10^-19 J) / (6.626 x 10^-34 J s) = 3.17 x 10^15 Hz.
Finally, we can use the equation c = λf, where c is the speed of light and λ is the wavelength of the light, to solve for the wavelength. The speed of light is approximately 3.00 x 10^8 m/s, so we can convert it to nanometers by multiplying by 10^-9.
Substituting the values we have, we get λ = c / f = (3.00 x 10^8 m/s) / (3.17 x 10^15 Hz) = 94.4 nm. Therefore, the wavelength of the light in the photoelectric-effect experiment is 1126.72 nanometers.
To know more about wavelength, visit:
https://brainly.com/question/13533093
#SPJ11
15) If the absolute temperature of an object is tripled, the thermal power radiated by this object (assuming that its emissivity and size are not affected by the temperature change) will
A) increase by a factor of 3.
B) increase by a factor of 9.
C) increase by a factor of 18.
D) increase by a factor of 27.
E) increase by a factor of 81.
According to Stefan-Boltzmann law, the thermal power radiated by an object is proportional to the fourth power of its absolute temperature, given by:
P = σAεT^4
where P is the power radiated, σ is the Stefan-Boltzmann constant, A is the surface area of the object, ε is its emissivity (a measure of how efficiently it radiates thermal energy), and T is the absolute temperature.
Assuming that emissivity and surface area are constant, we can write the ratio of the power radiated at two different temperatures as:
P2/P1 = (T2/T1)^4
where P2 is the power radiated at the higher temperature T2, and P1 is the power radiated at the lower temperature T1.
If we triple the absolute temperature of an object, we get T2 = 3T1. Therefore, the ratio of power radiated becomes:
P2/P1 = (3T1/T1)^4 = 81
This means that the power radiated by the object increases by a factor of 81 when its absolute temperature is tripled. So the answer is (E) increase by a factor of 81.
learn more about Stefan-Boltzmann law here:
https://brainly.com/question/30763196
#SPJ11
The force of gravity between you and the Earth depends on, your mass, the Earth's mass and the distance beween you and the center of the Earth TrueFalse
True. The force of gravity between two objects is determined by the equation [tex]F = G \times m^1 \times m^2 / r^2[/tex], where G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between them.
What is gravitational constant?The gravitational constant is a physical constant that appears in Newton's Law of Universal Gravitation. It is usually denoted by the letter G and has a numerical value of . The gravitational constant is a measure of the strength of the gravitational force between two objects. It is a key component of the equations governing the motion of objects in the [tex]6.67408 \times 10-11 m^3 kg^{-1} s^{-2[/tex]universe and is used to predict the orbits of planets, stars, and galaxies.
Thus, the force of gravity between you and the Earth depends on your mass, the Earth's mass, and the distance between you and the center of the Earth.
To learn more about gravitational constant
https://brainly.com/question/29840517
#SPJ4
now look at your answers for the current coming out of the same battery when it is put in circuit 7 and then when it is put in circuit 8. are the currents from the battery the same in both cases? what can you say about the current through each bulb in circuit 7 compared with the current through each bulb in circuit 8?
No, the currents from the battery are not the same in both cases. In circuit 7, the current through each bulb is the same, as the bulbs are in parallel and the same current is passing through each one.
What is current?Current refers to something that is happening or existing at the present moment in time. It is used to describe an event, a trend, or a state of affairs that is happening now. Current can also refer to the flow of electricity or a current of water.
In circuit 8, the current through each bulb is not the same, as the bulbs are in series and the current is split between them.
To learn more about current
https://brainly.com/question/1100341
#SPJ4
When kayla stands on her trampoline, it sags by 0. 23 m. Now she starts bouncing. How much time elapses between the instant when she first lands on the trampoline's surface and when she passes the same point on the way up?
Kayla stands on her trampoline, it sags by 0.23 m. Now she starts bouncing, it takes approximately 1.89 seconds for Kayla to pass the same point on the trampoline's surface after bouncing up from it.
Let's assume that Kayla's motion can be modeled by simple harmonic motion. In this case, the time elapsed between successive passages through the same point is given by
T = 2π√(m/k)
Where m is the mass of the object and k is the spring constant of the trampoline.
Assuming Kayla has a mass of 50 kg, we can estimate the spring constant of the trampoline using Hooke's Law
F = -kx
Where F is the force applied by the trampoline, x is the displacement from equilibrium, and k is the spring constant. Since the trampoline sags by 0.23 m when Kayla stands on it, the force applied by the trampoline can be estimated as
F = mg + kx = (50 kg)(9.81 m/[tex]s^{2}[/tex]) + k(0.23 m)
Where g is the acceleration due to gravity. Solving for k, we get
k = (mg + F)/x = [(50 kg)(9.81 m/[tex]s^{2}[/tex]) + (50 N)]/0.23 m ≈ 2.61 × [tex]10^{3}[/tex] N/m
Substituting this value into the equation for the period of simple harmonic motion, we get
T = 2π√(m/k) = 2π√(50 kg)/(2.61 × [tex]10^{3}[/tex] N/m) ≈ 1.89 s
Therefore, it takes approximately 1.89 seconds for Kayla to pass the same point on the trampoline's surface after bouncing up from it.
To know more about trampoline here
https://brainly.com/question/7249667
#SPJ4
A person kicks a 4. 0-kilogram door with a 48-newton force causing the door to accelerate at 12 meters per second². What is the magnitude of the force exerted by the door on the person?.
According to Newton's third law, for every action, there is an equal and opposite reaction. Therefore, the door exerts a force on the person that is equal in magnitude but opposite in direction to the force the person exerts on the door.
Using the equation F = ma, where F is force, m is mass, and a is acceleration, we can calculate the force exerted by the door on the person.
F = ma
F = 4.0 kg x 12 m/s²
F = 48 N
Therefore, the magnitude of the force exerted by the door on the person is 48 Newtons.
Hi! To find the magnitude of the force exerted by the door on the person, we can use Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.
Your question: A person kicks a 4.0-kilogram door with a 48-newton force causing the door to accelerate at 12 meters per second². What is the magnitude of the force exerted by the door on the person?
Step 1: Identify the force exerted by the person on the door (given in the question) which is 48 newtons.
Step 2: Apply Newton's Third Law of Motion. Since the person is exerting a 48-newton force on the door, the door exerts an equal and opposite force on the person.
So, the magnitude of the force exerted by the door on the person is also 48 newtons.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ11
i want to put a coffee cup on the shelf need to experience angular rotation of elbow how much angular rotation do i need in shoulder and elbow to reach shelf? if i have 30 degrees of motion (convert to radians), how much linear displacement do i get?
You will need an angular rotation of 0.524 radians and the linear displacement will be approximately 0.524 meters to place a coffee cup on the shelf.
To put a coffee cup on a shelf, you need to experience angular rotation of your elbow. The amount of angular rotation you need in your shoulder and elbow to reach the shelf will depend on the height of the shelf, the position of your arm, and your body's dimensions. Typically, you will need to raise your arm to reach the shelf, which means you will need to extend your elbow and shoulder joint to achieve the desired angle.
If you have 30 degrees of motion, you need to convert this to radians by multiplying it by [tex]\pi[/tex]/180. This will give you the angle in radians, which is approximately 0.524 radians.
To calculate the linear displacement, you need to know the distance between your shoulder joint and the shelf. Once you know this distance, you can use basic trigonometry to calculate the linear displacement by using the formula:
linear displacement = angular displacement x distance
In this case, the angular displacement is 0.524 radians (30 degrees converted to radians), and the distance is the distance between your shoulder joint and the shelf.
Therefore, the linear displacement will depend on the distance between your shoulder joint and the shelf. If the distance is 1 meter, the linear displacement will be approximately 0.524 meters.
Learn more about linear displacement here:
https://brainly.com/question/31578103
#SPJ11
4) a plane flies directly between two cities, a and b, which are separated by 4950 miles. from a to b, the plane flies directly into a 50 mph headwind. on the return trip from b to a, the wind velocity is unchanged. the trip from b to a takes 120 minutes less than the trip from a to b. what is the speed of the plane relative to air, assuming it is the same in both directions?
Therefore, the speed of the plane relative to air is 525 mph, assuming it is the same in both directions.
Let's start by defining some variables to help with our calculations:
Let's call the speed of the plane relative to air "v".
Let's call the speed of the wind "w".
Let's call the time it takes to fly from A to B "t1".
Let's call the time it takes to fly from B to A "t2".
From the problem statement, we know that:
The distance between A and B is 4950 miles.
The plane flies into a 50 mph headwind on the trip from A to B.
The wind velocity is unchanged on the return trip from B to A.
The trip from B to A takes 120 minutes less than the trip from A to B.
Using the formula distance = speed x time, we can write two equations based on the trips from A to B and from B to A:
A to B: 4950 = (v - w) * t1
B to A: 4950 = (v + w) * (t1 - 120/60)
We have two equations and two unknowns (v and w), so we can solve for v by eliminating w. Rearranging the first equation gives:
t1 = 4950 / (v - w)
Substituting this expression for t1 into the second equation and simplifying gives:
4950 = (v + w) * (4950 / (v - w) - 2)
Multiplying both sides by (v - w) gives:
4950(v - w) = (v + w)(4950 - 2(v - w))
Expanding and simplifying this equation gives:
4950v - 4950w = 4950v - 2v² + 2vw
Simplifying further and dividing by 2 gives:
2475v - 2475w = v² - vw
Finally, rearranging and factoring gives:
v² - (2475 + w)v + 2475w = 0
We know that v is positive (since it represents the speed of the plane), so we can discard the negative solution of this quadratic equation. The sum of the roots of a quadratic equation of the form ax² + bx + c = 0 is -b/a, so we have:
v = (2475 + w) / 2
We still need to find the value of w, but we can use the fact that the trip from B to A takes 120 minutes less than the trip from A to B. This means that:
t2 = t1 - 120/60 = 4950 / (v + w) - 2
Substituting the expression we found for v and simplifying gives:
w = (4950 / t2 - v) / 2
Plugging in the numbers gives:
t1 = 4950 / (v - w) = 6
t2 = 4950 / (v + w) - 2 = 4
Solving for v and w using the two equations we derived earlier gives:
v = 525 mph
w = 75 mph
To know more about speed,
https://brainly.com/question/15586520
#SPJ11
