There are 23 atoms of Fe in a 55.845 gram. As a result, after dividing our mass of 239 grams by the iron formula mass of 55.84 grams per bole, formol equals after calculation.
How do I translate grams to moles?Use the millimeters to mole formula to calculate the molecular weight n, of a substance with a given mass, m, (in grams) accurately. n = m / M, where M is the substance's molar mass also known as gram-molecular weight. a substance's molecular weight expressed as a mass in grams. Example: NaCl salt weighs 58.44 grams per gram-mole. American Meteorological Society, copyright 2022.
What is moles and how is it made?Number of Avogadro = 6.023 × 10²³. The products of every chemical reaction are measured using the Avogadro number. 1 mole of atoms, molecules, or particles is equal to 6.023 x 1023. Calculating the number of molecules is as follows: mole number = quantity of material / mass of one mole.
To know more about mass visit :
https://brainly.com/question/26789700
#SPJ4
There are 23 atoms of Fe in a 55.845 gram. As a result, after dividing our mass of 239 grams by the iron formula mass of 55.84 grams per bole, formol equals after calculation.
How do I translate grams to moles?Use the millimeters to mole formula to calculate the molecular weight n, of a substance with a given mass, m, (in grams) accurately. n = m / M, where M is the substance's molar mass also known as gram-molecular weight. a substance's molecular weight expressed as a mass in grams. Example: NaCl salt weighs 58.44 grams per gram-mole. American Meteorological Society, copyright 2022.
What is moles and how is it made?Number of Avogadro = 6.023 × 10²³. The products of every chemical reaction are measured using the Avogadro number. 1 mole of atoms, molecules, or particles is equal to 6.023 x 1023. Calculating the number of molecules is as follows: mole number = quantity of material / mass of one mole.
To know more about mass visit :
brainly.com/question/26789700
#SPJ1
When does the Lake-Effect Snow STOPs?
The timing of when lake-effect snow stops depends on several factors, including the temperature and wind patterns. Typically, lake-effect snow will stop when the temperature warms up, or when the wind direction changes so that it is no longer blowing over the lake.
What is Lake-effect snow?Lake-effect snow is a type of precipitation that occurs when cold air moves over a large body of relatively warm water, such as a lake. The air picks up moisture from the lake and as it rises, it cools and the moisture condenses into snow.
The snowfall can be intense and localized, and it typically stops when the temperature inversion breaks down, or when the wind direction changes so that it is no longer blowing over the lake.
In general, lake-effect snow is most common in the winter and early spring, when the temperature contrast between the lake and the surrounding land is greatest. The timing of when it stops can vary depending on the specific weather conditions at the time.
Learn more about Snow from
https://brainly.com/question/15919831
#SPJ1
As a quartz pebble is transported by a stream, thepebble will become more rounded as a result ofA) dissolving as water is running over the rockB) abrasion by colliding with other rocksC) deposition in well-sorted layersD) resistance to weathering and erosion
Correct option is B, The quartz pebble is rounded throughout its passage through the stream as a result of abrasion by colliding with other rocks.
What exactly does abrasion entail?In the subglacial environment, abrasion is accomplished by the sliding of debris-charged ice across the substrate. Abrasion is the process of (frictional) wear, caused by surfaces rubbing against each other.
The collision of the rock and pebble caused the pebbles to be transported through the stream. The surge in between them is caused by the rock and clashing. As a result, the edges will break off and the pebble will become smoother and rounder. Abrasion weathering is the term used to describe this form of weathering.
As a result of abrasion weathering brought on by the quartz pebble's impact with the rocks, it becomes round as it travels through the stream.
To learn more about abrasion from given link
https://brainly.com/question/15034861
#SPJ4
Which of these renewable resources results in an increase in pollution when used to produce energy?
a. water
b. wind
c. biomass
d. geothermal
When utilized to produce electricity, biomass, a renewable resource, increases pollution.
Which clean energy sources are polluting?Of all the available renewable energy sources, biomass produces the most pollution. Significant air pollution can be produced by burning wood, solid trash, and leftover plant material used in food production.
Biological waste produces pollution?According to Buonocore, a research scientist at the Center for Climate and Health, "air pollution from burning biomass can induce asthma exacerbations, hospitalizations for heart attack and respiratory disease, birth defects, neurological diseases, and mortality, among many other health implications."
To know more about biomass visit:-
https://brainly.com/question/21525417
#SPJ1
If you have 92 grams of a substance with a formula mass of 261.887 g/mol, how many moles do you have?
If a substance contains 92 gram with a molar mass of 261.887 g/mol then it will have .351 moles of substance.
What is moles?A substance's mole number is equal to the ratio of its given mass in a chemical reaction to the mass of one mole of that substance. A mole of any substance is equal to Avogadro's number, which is 6.023 1023. It's also used to express concentrations like mole per litre or molecular weight.The molar mass is calculated by dividing the mass of a given chemical element or chemical compound (g) by the amount of substance (mol). A compound's molar mass can be calculated by adding the standard atomic masses (in g/mol) of its constituent atoms.No. of moles of an atom = Given mass ÷ Molar mass
Here given mass = 92grams
Molar mass = 261.887 g/mol
By substituting the values,
Number of moles = 92 /261.887
Number of moles = 0.351 mol
To learn more about moles refer to :
https://brainly.com/question/14357742
#SPJ1
Which one is the most ionic? · A. P2O5 · B CrO3 · C MnO · D Mn2O7.
Option ( c) is correct. MnO is most ionic. Because it has lowest magnitude positive charge.
The ionic compounds are the chemical compounds composed of ions held together by electrostatic forces. The bond is called ionic bond. The compound consists of positively charged ions called cations and the negatively charged ions called anions. Manganese oxide is most ionic because it has lower oxidation state. Lower the charge on metal more is the ionic character. larger the charge more is the covalent character. Ionic compounds are hard and brittle. It has high melting and boiling points. They are electrically insulating as solids. the ions become highly conductive when melted. Ionic compounds can be synthesized from their constituent ions through solvent evaporation and precipitation.
To learn more about Ionic compounds please visit:
https://brainly.com/question/29730254
#SPJ4
3. Explain how the discovery of electrons and their arrangement in atoms gave further support to
Mendeleev's ideas.
The discovery of electrons and their arrangement in atoms gave further support to Mendeleev's ideas by providing a more detailed understanding of the structure of atoms and the way in which they interact with one another.
Mendeleev proposed that elements are arranged in the periodic table according to their atomic weight and chemical properties. This arrangement allows for patterns and trends to be observed in the properties of elements and helps to predict the properties of elements that had not yet been discovered.
The discovery of electrons, which are negatively charged particles that orbit the nucleus of an atom, and their arrangement in atoms provided a more detailed understanding of the structure of atoms and the way in which they interact with one another.
It was found that the number of electrons in the outermost shell of an atom, known as the valence electrons, determines the chemical properties of an element. The number of valence electrons is related to the position of an element in the periodic table, with elements in the same group having the same number of valence electrons
Learn more about atomic weight here:
https://brainly.com/question/28007578
estimate the boiling point of a 2m solution of nacl in water.
The boiling point of a 2m solution of nacl in water is >100 °C. The boiling point elevation formula may be used to calculate the boiling point of a 2 M solution of NaCl in water.
Tb = Kb x m, where Kb is the boiling point elevation constant for water. >100 °C (Since the boiling point for water is 100 °C, we would expect for the boiling point of the aqueous solution to be greater than 100 °C.) which is 0.52 K kg/mol. Because the molality of a 2 M solution of NaCl is 2 mol/kg, the anticipated change in boiling point is: Tb = 0.52 K kg/mol multiplied by 2 mol/kg = 1.04 K Because the average boiling point of pure water is 100 °C (at 1 atm), the anticipated boiling point of the 2 M NaCl solution in water is:Temperature at which water boils The boiling point elevation formula may be used to calculate the boiling point of a 2 M solution of NaCl in water. Tb = Kb x m, where Kb is the boiling point elevation constant for water. the boiling point of a 2m solution of nacl in water.
learn more about NaCl here:
https://brainly.com/question/1550455
#SPJ4
The complete question is:
Estimate the boiling point of a 2M solution of NaCl in water.
A. 100 °C
B. >100 °C
C. <100 °C
c) Calculate the frequency of light required to remove the valence electron(s).
The frequency of light required to remove the valence electron(s) from an atom is known as the ionization energy. The ionization energy is dependent on the atomic structure and is specific to each element.
What is calculation of frequency of light?This energy can be calculated using the equation: E = hf = hc/λ, where E is the ionization energy, h is Planck's constant, f is the frequency of the light, c is the speed of light, and λ is the wavelength of the light.E = hf = hc/λwhere E is the ionization energy, h is Planck's constant, f is the frequency of the light, c is the speed of light, and λ is the wavelength of the light.To calculate the frequency of light required to remove the valence electron(s) from an atom, the ionization energy of the atom must be known, and then the equation can be rearranged to solve for frequency:f = E/h = hc/λEIt is important to note that the ionization energy for each element is unique and can be found in periodic table or in the reference book.To learn more about frequency of electron refer:
brainly.in/question/37881991
#SPJ1
the empirical formula for trichloroisocyanuric acid, the active ingredient in many household bleaches, is ocncl. the molar mass of this compound is 232.41 g/mol. what is the molecular formula of trichloroisocyanuric acid?
Answer:
C3Cl3N3O3
Explanation:
The "trichloro-" tells us there are 3 chlorines (Cl).
Set up a table of the elements along with their molar masses, See the attached spreadsheet.
By changing the number of each atom, we can calculate the resulting molar mass, shown at the lower right, in green. One can try various numbers for each element in the compound, but understand the chemistry helps.
The 3 Cl atoms add 106.4 g/mole to the total of 232.4 g/mole. I know there are probably 3 carbon atoms, and that adds another 36.0 g/mole. The remaining 90.0 g/mole must consist of N and Cl atoms. 3 N atoms would contribute 42.0 g/mole, leaving 42 g/mole. Oxygen has a molar mass of 16 g/mole, so if we add 3 O atoms, that would make up the remaining 42.0 grams/mole.
This would not be easy to do without more information, but I had a sense for what the structure might look like, and went with those guesses, to arrive at C3Cl3N3O3
What is stored in germ plasm or gene banks?
A seeds, sperm and eggs cells or DNA material
B seeds that are not used by farmers and gardeners
C animals from captive breeding programs that were not able to survive in the wild
D instructions about how to restore a species when it becomes extinct
Answer:
A. seeds, sperm and eggs cells, or DNA
Explanation:
Germplasm are living genetic resources such as seeds or tissues that are maintained for the purpose of animal and plant breeding, preservation, and other research uses.
sig figs please help
Is HF a nonpolar covalent bond?.
HF is a polar covalent bond. The difference in electronegativity between hydrogen and fluorine causes the electrons in the bond to be unevenly distributed, resulting in a partial positive charge on the hydrogen atom and a partial negative charge on the fluorine atom.
This creates a polar bond rather than a nonpolar covalent bond. In a nonpolar covalent bond, the electrons are shared equally between the two atoms, resulting in no net dipole (separation of charge).
However, in a polar covalent bond, the electrons are not shared equally, resulting in a net dipole. The difference in electronegativity between the atoms causes one atom to have a stronger attraction for the electrons than the other, resulting in a partial positive charge on one atom and a partial negative charge on the other.
In the case of the HF molecule, the fluorine atom has a much higher electronegativity than the hydrogen atom.
As a result, the electron cloud is pulled more towards the fluorine atom, leaving the hydrogen atom with a partial positive charge (+) and the fluorine atom with a partial negative charge (-). This creates a polar bond with a net dipole moment, meaning that the molecule has a positive and a negative pole.
It is also important to mention that the polar nature of a covalent bond can also be determined by the molecular geometry.
The bond dipole moment is determined by the vector difference of the charges and the distance between them, so the bond dipole moment is zero in a symmetrical molecule but not in an asymmetrical one.
Learn more about covalent bond:
https://brainly.com/question/9833711
#SPJ4
potential acute health effects of hydrochloric acid___
Answer: The health effects of hydrochloric acid are eye, nose, and respiratory tract irritation or inflammation, pulmonary edema. I hope this helps!
Explanation: This is otherwise known as Acute inhalation exposure.
Changing the Amount of Epsom Salt
In this task, you will carry out the chemical reaction between Epsom salt and
2NH3+ MgSO4 + 2H₂O → Mg(OH)2 + (NH4)2SO4.
This time, you'll use varying amounts of Epsom salt to see how the amount o
of product. Review these lab safety requirements before you begin.
Estimated time to complete:
Total time: at least 8 hours
Active time: 1 hour
If you're using an Edmentum lab kit, remove the safety goggles, protective glo-
These materials are italicized in the following list. In addition to the kit materia
appearing in the list. If you aren't using an Edmentum lab kit or do not have ac
check with your teacher for help.
Put on safety goggles and protective gloves.
Changing the Amount of Epsom SaltMaterials-Safety goggles-Protective gloves-Beaker-Graduated cylinder-Stirring rod-2NH3-MgSO4-2H₂O-Epsom salt-Test tubes-Test tube rack-ThermometerProcedurePut on safety goggles and protective gloves.Measure out 2NH3, MgSO4, 2H₂O, and Epsom salt in separate beakers.Pour the measured amounts of each chemical into a test tube, in the following order: 2NH3, MgSO4, 2H₂O, and Epsom salt.Secure the test tube in a test tube rack.Heat the contents of the test tube to 80°C, using a thermometer to monitor the temperature.Stir the contents of the test tube with a stirring rod until all of the Epsom salt has dissolved.Allow the solution to cool to room temperature.Repeat steps 2-7, using different amounts of Epsom salt for each trial.To learn more about Changing the Amount of Epsom Salt refer to:
https://brainly.com/question/2506548
#SPJ1
How many moles of kf are contained in 347 g of water in a 0. 175 mol kg-1 kf solution?.
6.07 x 10-2 moles of kf are contained in 347 g of water in a 0. 175 mol kg-1 kf solution
What does the word "molality" mean?
The quantity of a material dissolved in a given mass of solvent is known as its molality (m), also known as molal concentration. The moles of a solute per kilogram of a solvent are how it is defined. The word "molality" is derived from the word "molarity," which refers to a solution's molar concentration.
The mole is the volume of a system that has the same number of atoms in 0.012 kilograms of carbon 12 as there are elementary particles.
The given mass of water, m1 is 347g
Molality, m is 0.175mol/kg
347 g of water is the same as 347 ml (since 1 ml of water has a mass of 1 gram) which is 0.347 L.
KF is therefore equal to 0.17 * 0.347 i.e. 6.07 x 10-2.
To learn more about molality use link below:
https://brainly.com/question/1370684
#SPJ4
Fill in the words to complete each step in liquid spill cleanup. 1 cover the spill. 1. Surround the area with ____ absorbent material 2. Scoop up the material and place in a ____ 3. Place the bagged waste in a ____ 4. Wipe down the area with _____
The words to complete the sentence are :
1) he Absorbent material
2) The Plastic bag
3) The solid waste container
4) The Detergent and the water
The complete sentences in the spill cleanup are :
1) The step in liquid spill cleanup.
Surround the area with "Absorbent material", then cover the spill.
2) The step in liquid spill cleanup.
Scoop up the material and place in a "plastic bag".
3) The step in liquid spill cleanup.
Place the bagged waste in a "solid waste container".
4) The step in liquid spill cleanup.
Wipe down the area with "detergent and the water".
To learn more about spill cleanup here
https://brainly.com/question/30246211
#SPJ4
describe where
the energy is coming from and how it is affecting change or putting an object into motion
help me and fast
The energy is coming from the battery that is in the torchlight.
In the case of an object in motion, energy is coming from the kinetic energy of the object. Kinetic energy is the energy an object possesses due to its motion. This energy is transferred to the object by an external force, such as a push or a pull, which causes the object to start moving or to change its motion.
What is the energy about?Energy is the ability to do work and can take many forms, such as thermal, kinetic, potential, and chemical energy. Energy can be transformed from one form to another and can also be transferred from one object to another.
Therefore, In the case of an object being put into motion, energy is coming from the potential energy of the object. Potential energy is the energy an object possesses due to its position or configuration. This energy is transferred to the object by an external force, such as gravity, which causes the object to start moving or to change its motion.
Learn more about energy from
https://brainly.com/question/2003548
#SPJ1
Which law states that volume increases with temperature?
Charles Law states that volume increases with temperature.
Charles law state that the volume given mass of gas varies directly with the absolute temperature of the gas when pressure is kept constant. The absolute temperature is measures with the kelvin scale.
The volume of a gas having fixed mass tends to decrease when cooled and increases when the temperature is increased. The volume of gas tends to get increased by 1/273 of its actual volume at 0° C.
The law also states that the kelvin temperature and the volume will be in direct proportion when the pressure exerted on a sample of dry gas is held constant.
Learn more about Charles law,
https://brainly.com/question/30321367
Phosphorous-32, what would the mass of one mole of this element be?
Show how to balance the following chemical equation.Potassium metal and chlorine gas combine to form potassium chloride.
Here is the balanced chemical equation for the given reaction-
2 K (s) + Cl₂ (g) ⇒ 2 KCl (s)
Steps to balance a chemical equation are-
1. Write the unbalanced chemical equation.
2. Write down the number of atoms of each element present on both reactant as well as product side.
3. Add the coefficients to balance mass in a chemical equation
First balance Chlorine and then Potassium by the trial and error method.Add a stoichiometric coefficient of 2 on the product side to first balance the chlorine atomsThen for balancing the K atoms, you can add 2 on the reactant side and it will balance the whole reaction which will be given by-2 K (s) + Cl₂ (g) ⇒ 2 KCl (s)
Learn more about stoichiometric coefficient here:
https://brainly.com/question/29856106
#SPJ4
Zuri finds that sample A and B are shiny and can be hammered. Sample A is hard. Sample C and D are dull. Sample C is a liquid and sample D is brittle. Choose the correct option from the following Group of answer choices Samples A and B are metals, and samples C and D are nonmetals. Samples A, B, C, and D are all metals. Samples A, B, C, and D are all nonmetals. Samples A and B are nonmetals, and samples C and D are metals.
Samples A and B are metals, and samples C and D are nonmetals.
What is the nature of the materials?We have to note that the appearance of the object can be used to determine the kind of object that it is. We know that a metal would always have a luster and the exception here is only mercury that is a liquid metal.
On the other hand, the non metals are either liquid or they are solids that are brittle and would have a low melting and boiling point due to the lack of a crystalline structure.
Learn more about metals:https://brainly.com/question/29404080
#SPJ1
which mineral has a metallic luster, a black streak, and is an ore of iron?
Magnetite is black or brownish-black with a metallic luster, has a Mohs hardness of 5–6 and leaves a black streak. Small grains of magnetite are very common in igneous and metamorphic rocks.
What is meant by metamorphic ?
Slate and gneiss are examples of metamorphic rocks, which were altered into new shapes and structures by intense heat and pressure.The metamorphic rocks gneiss, slate, marble, schist, and quartzite are a few examples.In the construction of buildings, slate and quartzite tiles are utilized. Marble is valued for sculpture as well as for use in building construction.Atom by atom, the minerals in the original rock are partially or completely replaced to create new minerals in metamorphic rocks.Phyllite, soapstone, schist, quartzite, marble, and gneiss are examples of metamorphic rock types. There are parks containing specimens of metamorphic rocks.Rocks that undergo metamorphism can originate in one of three ways.Contact metamorphism, regional metamorphism, and dynamic metamorphism are the three types.To learn more about metamorphic refer to
https://brainly.com/question/398139
#SPJ4
How many grams of oxygen are required to react with 20. 0 grams of octane (c8h18)?.
70g of oxygen are required to react with 20. 0 grams of octane
What does the law of conservation of mass mean?
According to the law of conservation of mass, mass is neither generated nor destroyed during a chemical process. For instance, when coal is burned, the carbon atom in it transforms into carbon dioxide. The carbon atom transforms from a solid to a gas, yet its mass remains constant.
Every chemical equation must have a product mass that is equal to the reactant mass in accordance with the law of conservation of mass. Therefore, every element must have the same amount of atoms on both sides of the equation.
2C8H18 + 25O2 → 16CO2 + 18H2O
2 moles of octane will be 2*114g i.e. 228g
25 moles of oxygen will be 25*32g i.e. 800g
228 g of octane reacts with 800 g of Oxygen,
So 20g of octane reacts with (800/228)*20g of Oxygen i.e. 70g
To learn more about law of conservation of mass use link below:
https://brainly.com/question/13891351
#SPJ4
PLEASE HELPPP Lead (II) nitrate as Pb(NO3)2 and potassium iodide as KI combine to form the products shown.
2 KNO3 + PbI2
How many moles of each reactant are involved in the reaction?
(1 point)
Responses
2 moles of lead (II) nitrate and 2 moles of potassium iodide
2 moles of lead (II) nitrate and 2 moles of potassium iodide
1 mole of lead (II) nitrate and 1 mole of potassium iodide
1 mole of lead (II) nitrate and 1 mole of potassium iodide
1 mole of lead (II) nitrate and 2 moles of potassium iodide
1 mole of lead (II) nitrate and 2 moles of potassium iodide
2 moles of lead (II) nitrate and 1 mole of potassium iodide
The number of moles of each reactant involved in the reaction are as follows: 1 mole of lead (II) nitrate and 2 moles of potassium iodide (option C).
What is a chemical reaction?A chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.
According to this question, lead (II) nitrate and potassium iodide combine to form potassium nitrate and lead iodide as follows:
Pb(NO₃)₂ + 2KI → PbI₂ + 2KNO₃
It can be observe that 1 mole of lead nitrate and 2 moles of pottasium iodide reacted.
Learn more about chemical reaction at: https://brainly.com/question/3461108
#SPJ1
The number of moles of each reactant involved in the reaction is shown below:
1 mole of lead (II) nitrate and 2 moles of potassium iodide
(option C). is correct
What is a chemical reaction?A chemical reaction is described as a process that leads to the chemical transformation of one set of chemical substances to another.
From the queation, we can deduce that lead (II) nitrate and potassium iodide combine to form potassium nitrate and lead iodide as follows:
Pb(NO₃)₂ + 2KI → PbI₂ + 2KNO₃
Therefore, 1 mole of lead nitrate and 2 moles of potassium iodide reacted to form 2KNO₃.
Learn more about chemical reaction at: https://brainly.com/question/11231920
#SPJ1
What represents the total number of protons and neutrons in an atom?
Answer:
The mass number of an atom is the total number of protons and neutrons in its nucleus. The mass of the atom is a unit called the atomic mass unit (amu)
if the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe?
room temp water (temp): 21.5°C
room temp water (volume (mL) Air): 5.03
The moles of gas were in each syringe exists 2.583 x 10⁻⁴ mol.
How to estimate the moles of gas were in each syringe?Given: Temperature of water (H₂O) = 21.3°C
Convert Temperature to Kelvin
T = °C + 273
substitute the values in the above equation, we get
T = 21.3 + 273 = 294.3 K
volume of (H₂O) gaseous state = 5.1 mL
Convert mL to liter
1000 mL = 1 L
5.1 ml = 5.1/1000 = 0.0051 L
Pressure = 1.2 atm
Number of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for number of moles
n = PV / RT . . . . . . . . . (1)
Let P be the pressure
V be the Volume
T be the Temperature
n be the Number of moles
R be the ideal gas constant
Where, R = 0.08206 L. atm / mol. K
Substitute the value in formula (1) to estimate number of moles
n = 1.2 atm x 0.0051 L / 0.08206 L.atm.mol⁻¹. K⁻¹ x 294.3 K
simplifying the equation, we get
n = 0.0061 atm. L / 24.162 L.atm.mol⁻¹
n = 2.525 x 10⁻⁴ mol
no. of moles of gas (H₂O) = 2.525 x 10⁻⁴ mol
Part B:
Temperature of water (H₂) = 21.3°C
Convert Temperature to Kelvin, we get
T = °C + 273
T = 21.3 + 273 = 294.3 K
volume of (H₂) gas = 5.2 mL
Convert mL to liter
1000 mL = 1 L
5.2 ml = 5.2/1000 = 0.0052 L
Pressure = 1.2 atm
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n = PV / RT . . . . . . . . . (1)
where, R = 0.08206 L. atm / mol. K
substitute the value in formula (1) to estimate number of moles
n = 1.2 atm x 0.0052 L / 0.08206 L.atm.mol⁻¹. K⁻¹ x 294.3 K
simplifying the equation, we get
n = 0.0062 atm. L / 24.162 L.atm.mol⁻¹
n = 2.583 x 10⁻⁴ mol
Number of moles of gas (H₂) = 2.583 x 10⁻⁴ mol
The complete question is:
If the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe?
Air(H2O) syringe
Room temperature water at 21.3 degrees Celsius
Volume of 5.1 mL
Hydrogen(H2) syringe
Room temperature water at 21.3 degrees Celsius
Volume of 5.2 mL
To learn more about ideal gas constant refer to:
https://brainly.com/question/14279790
#SPJ1
Is HCl polar covalent?.
HCl is a polar covalent compound.
The H-Cl bond is covalent, meaning that the electrons are shared between the hydrogen and chlorine atoms. However, the electron density is not evenly distributed between the two atoms. The chlorine atom is more electronegative than the hydrogen atom, meaning it attracts electrons more strongly. This causes the electrons to be more concentrated around the chlorine atom, creating a partial negative charge on the chlorine atom and a partial positive charge on the hydrogen atom. This uneven distribution of charge makes HCl a polar covalent compound.
To learn more about covalent bond:
https://brainly.com/question/2234173
#SPJ4
a student is conducting a laboratory experiment with sulfur hexafluoride with a molar mass of 146.07 g/mol . however, the student did not complete the required pre-laboratory notes.
A microscopic view of animal tissue is shown. Epithelial tissue is the kind of animal tissue that is depicted in the picture. The right answer is A.
Epithelial tissue, which coats internal organs and cavities and gives birth to glands, covers the surface of the body. The cells in epithelial tissue often have regular shapes and sizes and frequently follow a recognisable pattern. The tissue in the picture appears to be made up of cells that are layered, evenly shaped, sized, and arranged in a single layer, similar to epithelial tissue. As a result, choice A, "Epithelial tissue," is correct. In order to improve the retrieval, access, dissemination, and dissemination of institutional information in the field of health, it seeks to standardise and enhance terminology, concepts, and acronyms. Clinical classifications, vocabularies, and terminologies are standardised collections of ideas (and their synonyms) for registering health-related occurrences and interventions in sufficient detail to facilitate the delivery of healthcare.
Learn more about Epithelial tissue here:
https://brainly.com/question/30085973
#SPJ4
can the light independent reactions occur when light is present?
The light independent reactions occur when light is present with NADPH and ATP.
What is light independent reactions?
Carbon dioxide and energy in the form of ATP and NADPH are the prerequisites or components for light-independent processes. The light-independent processes consume these necessary components and produce glucose. The energy carriers that return from these reactions to the ones that depend on light are ADP and NADP+.
What is reactions ?
The conversion of one or more chemicals, known as reactants, into one or more new compounds, known as products, is referred to as a chemical reaction. when two or more substances interact, the arrangement of their atoms or molecules changes, resulting in the formation of one or more new substances.
Therefore, light independent reactions occur when light is present with NADPH and ATP.
Learn more about light reactions from the given link.
https://brainly.com/question/2854133
#SPJ4
Energy in Chemical Reactions II Unit Test
NEED HELP FAST
1. A scientist wants to perform a reaction in a vacuum chamber to control the experiment as much as possible and to prevent other variables from impacting the reaction. The scientist is trying to determine if the reaction is endothermic or exothermic and measure how much energy is absorbed or given off. Is this a valid approach? Why or why not? In three to five sentences, explain your reasoning.
2. A chemist wants to observe the following reaction:
2H2 + O2 → 2H2O
The chemist is standing inside a room with oxygen in the air and has a balloon filled with hydrogen. The chemist holds a small flame up to the hydrogen balloon. When the balloon pops, the hydrogen explodes in a ball of fire.
Based on what you know about breaking and forming bonds, explain which part of the reaction is higher in energy (i.e., does it take more energy to break the bonds of the reactants, or is more energy given off when the product bonds are formed?). Defend your answer in three to five sentences.
3. A scientist studies the bond energies of different compounds containing nitrogen (N). The scientist observes that the N–N bonds in one group of compounds have a bond energy of 209 kJ/mol, while the N–N bonds in another group of compounds have a bond energy of 418 kJ/mol. In one or two sentences, hypothesize a reason for this difference.
Answer:
1.) A vacuum chamber is a valid approach to control the experiment and prevent other variables from impacting the reaction. However, the scientist should be careful in interpreting the results since the reaction might be different in a vacuum than in air. A vacuum can affect the rate of reaction and the thermodynamics of the reaction, which might make it difficult to determine if the reaction is endothermic or exothermic.
2.) The reaction 2H2 + O2 → 2H2O is exothermic because it releases energy. When the bonds in the hydrogen molecule break, a large amount of energy is released, and when the hydrogen and oxygen molecules combine to form water, the energy released is greater than the energy required to break the bonds. This results in a net release of energy and makes the reaction exothermic.
3.) The difference in bond energies of N–N bonds in different compounds could be due to the presence of different chemical groups around the nitrogen atoms. These chemical groups can influence the bond strength between the nitrogen atoms, causing the bond energy to vary. Additionally, different bonding arrangements, such as single or double bonds, could also contribute to the difference in bond energy.
I would greatly appreciate Brainliest.
Have a nice day.
