The mass (in grams) of H₂ gas produced when 14.3 g of aluminum dissolves in the acid is 1.6 g
How do I determine the mass of H₂ produced?First, we shall determine the reacting mass of Al and the mass of H₂ produced from the balanced equation. This is shown below
2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g
Molar mass of Al = 27 g/molMass of Al from the balanced equation = 2 × 27 = 54 gMolar mass of H₂= 1 × 2 = 2 g/mol Mass of H₂ from the balanced equation = 3 × 2 = 6 gFrom the balanced equation above,
54 g of Al reacted to produce 6 g of H₂
Finally, we shall determine the mass of H₂ produced when 14.3 g aluminum, Al dissolves. Details below:
From the balanced equation above,
54 g of Al reacted to produce 6 g of H₂
Therefore,
14.3 g of Al will react to produce = (14.3 × 6) / 54 = 1.6 g of H₂
Thus, the mass of H₂ produced is 1.6 g
Learn more about mass:
https://brainly.com/question/9526265
#SPJ1
Complete question:
Sulfuric acid dissolves aluminum metal according to the following reaction:
2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g)
Suppose you wanted to dissolve an aluminum block with a mass of 14.3g. How many grams of H₂ gas would be produced by the complete reaction of the aluminum block?
describe how the solvents worked as the mobile phase of the liquid chromatography experiment. why was it necessary to use different concentrations of aqueous isopropanol in the step gradient separation?
In liquid chromatography (LC), the mobile phase is a solvent or a mixture of solvents that flows through the chromatography column.
The choice of mobile phase and its composition is critical for the separation of sample components. The solvents used as the mobile phase should be able to dissolve the sample components, but not the stationary phase, and they should also have different affinities for the sample components, so that the components can be separated effectively.
In a step gradient separation, different concentrations of aqueous isopropanol are used as the mobile phase at different times during the chromatographic run. The step gradient separation involves a series of steps where the concentration of isopropanol in the aqueous mobile phase is gradually increased. This method allows for the separation of components with different polarities, as the increasing concentration of isopropanol reduces the polarity of the mobile phase and hence affects the separation of components.
The different concentrations of aqueous isopropanol are necessary because they provide a range of polarity conditions for the separation. The separation of sample components depends on their relative affinity for the stationary and mobile phases. By varying the composition of the mobile phase, the affinity of the mobile phase for the sample components can be adjusted, which leads to the separation of the components. For example, if the mobile phase is too polar, some non-polar components may not interact with it and may elute early from the column without separation. Conversely, if the mobile phase is too non-polar, some polar components may not interact with it and may elute late from the column, which may result in poor separation.
By using a step gradient of different concentrations of aqueous isopropanol, the mobile phase is changed gradually, allowing for the separation of a wider range of sample components. The higher concentration of isopropanol results in a less polar mobile phase, which is better suited for the separation of more non-polar components, while the lower concentration of isopropanol results in a more polar mobile phase, which is better suited for the separation of more polar components. This allows for the separation of a broader range of sample components and improves the resolution of the LC experiment.
Learn more about chromatography here: brainly.com/question/1394204
#SPJ4
now that the order for both reactants is known, the rate constant, k, can be determined. each of the four trials can be used to calculate k and then the four results can be averaged. we will use trial 4 to determine the rate constant in this example. what is the value of the rate constant? [a], mol/l [b], mol/l rate, mol/(l-min) trial 1 0.830 0.913 0.450 trial 2 1.66 0.913 0.900 trial 3 0.830 1.83 0.900 trial 4 0.626 0.282 0.105 rate
The rate law for a reaction of the form A + B → products :[tex]rate = k [A]^m [B]^n[/tex]
where k is the rate constant and m and n are the orders of the reaction with respect to A and B, respectively.
To determine the rate constant k for this reaction, we can use trial 4, which gives:
[A] = 0.626 mol/L
[B] = 0.282 mol/L
rate = 0.105 mol/(L-min)
Assuming the reaction is first-order with respect to both A and B, we have:
[tex]rate = k [A]^1 [B]^1[/tex]
Substituting in the values for [A], [B], and rate, we get:
0.105 mol/(L-min) = k (0.626 mol/L) (0.282 mol/L)
Solving for k, we get:
k = 0.105 mol/(L-min) / (0.626 mol/L) / (0.282 mol/L) = 0.626 L/(mol-min)
We can then take the average of the rate constants obtained from all four trials to get a more accurate estimate of the rate constant:
[tex]k_avg = (k1 + k2 + k3 + k4) / 4[/tex]
Substituting in the values of k from each trial, we get:
[tex]k_avg = (0.450 L/(mol-min) + 0.900 L/(mol-min) + 0.900 L/(mol-min) + 0.626 L/(mol-min)) / 4[/tex]
[tex]k_avg = 0.719 L/(mol-min)[/tex]
Therefore, the average rate constant for the reaction is [tex]0.719 L/(mol-min).[/tex]
To learn more about rate law refer to this link
https://brainly.com/question/30379408
#SPJ4
propane gas is to be compressed irreversibly from 5 bar and 323 k to 15 bar and 343 k in an adiabatic compressor in a petrochemical plant. calculate the work required per mole of propane using
The work input per mole of propane passing through the compressor If Propane obeys the Redlich-Kwong equation of state is 676.9 J/mol.
The Redlich – Kwong equation of state is an empirical, algebraic equation that relates temperature, pressure, and volume of feasts. It's generally more accurate than the van der Waals equation and the ideal gas equation at temperatures above the critical temperature. It was formulated by Otto Redlich and Joseph Neng Shun Kwong in 1949.
Tc = 369.9K
Pc = 42.5bar
W = 0.123
Cp = 29.595+0.838x10⁻₁ + 3.256 x 10⁻⁴ - 3.958 x 10⁻⁷ + 13.129 x 10⁻¹¹
Now given system is Adiabatic compressor
ΔH = Q +W [Q = 0]
ΔH = W
State1: T1 = 323K, P1 = 5bar
Tr = T/Tc = 323/369.9 = 0.873
Pr = P/Pc = 5/42.5 = 0.118
Redlich-Kwong equation of state is,
ΔH = RT2[Z2 - 1 -3/2 A2/B2 ln(1+B2/Z2)]
A1 = 0.42748x0.118/(0.873)².⁵
= 0.071
B1 = 0.08664x0.118/0.873
= 0.012
ΔH = W =(8.314)(343)[0.830-1-3/2(0.182/0.033)lm(1+0.033/0.830)]
ΔH = 676.9J/mol
Work input is 676.9 J/mol.
Learn more about Compression:
https://brainly.com/question/14245086
#SPJ4
Complete question:
Propane gas is to be compressed irreversibly from 5 bar and 323 K to 15 bar and 343 K by an adiabatic compressor in a petrochemical plant. Calculate the work input per mole of propane passing through the compressor If Propane obeys the Redlich-Kwong equation of state.
What is the area of science that studies tiny particles like atoms?
Quantum mechanics is the study of atoms and incredibly tiny particles that are even smaller.
In quantum mechanics, another branch of physics, atomic and subatomic particles are investigated. The primary field of science that deals with the study of atoms and molecules is chemistry. By utilizing their knowledge of atoms, chemists create molecules that resemble drugs. A distinction is established between atomic physics, which studies the atom as a system made up of a nucleus and electrons, and nuclear physics, which explores nuclear reactions and special properties of atomic nuclei. Three subatomic particles make up matter: protons, neutrons, and electrons. The only subatomic particles that have electrical charges are protons and electrons, with protons having a positive charge and electrons having a negative charge.
Learn more about quantum mechanics here:
brainly.com/question/11855107
#SPJ4
summerize case study amphilbians at risk
Amphibians are at risk due to a variety of factors, including habitat loss, climate change, disease, and pollution. Habitat loss is caused by human activities such as deforestation, urban sprawl, and agricultural expansion.
What is Amphibians?Amphibians are vertebrate animals that live both on land and in water. They are cold-blooded, meaning their body temperature is determined by their environment. They have a moist, slimy skin and are usually four-legged. Amphibians go through a metamorphosis, meaning they change from a juvenile aquatic form to an adult terrestrial form. Examples of amphibians include frogs, toads, salamanders, newts and caecilians. Amphibians depend on water to reproduce, as they lay their eggs in water and the larval stages of the species develop in water. Amphibians are important to the environment because they are indicators of environmental health; they absorb pollutants and serve as food for other creatures. They are also essential to the food chain as they eat both plants and animals.
To learn more about Amphibians
https://brainly.com/question/27882272
#SPJ1
which is most likely true for an atom with five valence electrons? group of answer choices it will gain three electrons. it will lose three electrons. it will lose one electron. it will lose two electrons.
Most likely true for an atom with five valence electrons is it will lose three electrons.
This is because atoms that have five valence electrons are considered to be in group 5A of the periodic table. Group 5A elements tend to lose three electrons in order to achieve a noble gas electron configuration. This is because the noble gas configurations have the maximum number of electrons in their outer shells, making them very stable. The equation for this reaction would be 5e- → 2e- + 3e-.An electron that is not connected to or bonded to an atomic nucleus is referred to as a vacant electron. It can be utilised to conduct electricity and is free to move through the material. Materials with vacancy electrons include semiconductors, insulators, and metals.
learn more about valence electrons Refer:brainly.com/question/28977387
#SPJ4
What quantity in moles of CaF2 are in 75.5G of CaF2?
Considering the definition of molar mass, the amount of moles of CaF₂ in 75.5 g of CaF₂ is 0.968 moles.
Definition of molar massThe molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.
The molar mass of a compound is the sum of the molar mass of the elements that form it multiplied by the number of times they appear in the compound.
Molar mass of CaF₂In this case, you know the molar mass of the elements is:
Ca= 40 g/moleF= 19 g/moleThe molar mass of the compound CaF₂ is calculated as:
CaF₂= 40 g/mole + 2× 19 g/mole
Solving:
CaF₂= 78 g/mole
Moles of 75.5 g of CaF₂You can apply the following rule of three: If by definition of molar mass 78 grams of the compound are contained in 1 mole, 75.5 grams of the compound are contained in how many moles?
moles= (75.5 grams× 1 mole) ÷78 grams
moles= 0.968 moles
Finally, the amount of moles is 0.968.
Learn more about molar mass:
brainly.com/question/5216907
#SPJ1
When a 0.680 g
sample of olive oil is burned in a calorimeter, the heat released increases the temperature of 370 g
of water from 22.7 ∘C
to 39.0 ∘C
. What is the energy value of the olive oil in kcal/g
?
Express your answer using two significant figures.
45.3 Kj is the correct answer
What is energy ?
Energy is a property of matter and radiation that is the ability to do work. It can take many forms, including thermal energy, light energy, mechanical energy, electrical energy, and chemical energy. Energy can be transformed from one form to another but cannot be created or destroyed, according to the law of conservation of energy. Energy is essential for many processes and activities in the natural world, such as photosynthesis in plants, movement of ocean currents, and generation of electricity in power plants. In physics, energy is often described as a scalar quantity and is typically measured in units of joules (J) or electron volts (eV).
q = mCdT = (370g)(4.184J/g/deg)(16.4deg) = 25389J = 25.389 kJ. Since you have 0.560 g of oil, the energy per gram is 25.389 kJ/0.560g = 45.34 kJ/g = 45.3 kJ/g (to 3 sig figs)
1 cal = 4.184 j so hopefully you can convert to calories and kcal etc.
To learn more about the energy , click the given link ; https://brainly.com/question/13881533
#SPJ1
What happens to volume in isothermal expansion?
Answer:
Pressure reversal
Explanation:
heat transferred into the system is equal to the work done on the system by the surroundings. If we plot an isothermal process on the xy plane, we see that as the pressure increases, the volume will decrease and as the pressure decreases, the volume will increase.
in a quasi-static isobaric expansion, 575 j of work are done by the gas. if the gas pressure is 0.40 atm, what is the fractional increase in the volume of the gas, assuming it was originally at 21.0 l?
A quasi-static isobaric expansion requires the gas to exert 575 j of work. suppose there is a 0.40 atm gas pressure the fractional increase in volume of the gas is 68.5
In a quasi-static isobaric expansion, the pressure of the gas remains constant, and the work done by the gas is given by:
W = PΔV
where W is the work done by the gas, P is the constant pressure of the gas, and ΔV is the change in volume of the gas. Rearranging this equation, we get:
ΔV = W/P
Substituting the given values, we have:
ΔV = 575 J / (0.40 atm) = 1437.5 L·atm
The fractional increase in volume is the ratio of the change in volume to the original volume:
ΔV/V = 1437.5 L·atm / (21.0 L x 1.00 atm) = 68.5
Therefore, the fractional increase in volume of the gas is 68.5, or 6750%.
Learn more about work done by the gas here:
https://brainly.com/question/29983272
#SPJ4
Find the oxidation number
please help
The oxidation number of the given elements in the compound is:
Mn in MnO₂ is +4Mn in KMnO₄ is +7K in KBr is + 1.What is oxidation number?An element's oxidation number is the number assigned to it in a chemical combination. The number of electrons that atoms in a molecule can share, lose or gain while forming chemical connections with other atoms of a different element is known as the oxidation number.
The oxidation number of elements in the compounds is calculated as follows:
Mn in MnO₂: Mn + (-2 * 2) = 0
Mn - 4 = 0
Mn = +4
Mn in KMnO₄: Mn + (+1) + (-2 * 4) = 0
Mn - 7 = 0
Mn = +7
K in KBr: K + (-) = )
K - 1 = 0
K = + 1.
Learn more about oxidation number at: https://brainly.com/question/27239694
#SPJ1
calculate the moles of ammonia present in a 2.860 g sample of ammonia, which has a molar mass of 17.030 g/mol.
The moles of ammonia present in a 2.860 g sample of ammonia has a molar mass of 17.030 g/mol. Then, the Number of Moles is 0.2 moles.
Ammonia :
Ammonia is an inorganic compound of nitrogen and hydrogen with the chemical formula NH3. A stable binary hydride and the simplest source of hydrogenation, ammonia is a colorless gas with a distinct, pungent odor. Biologically, it is a common nitrogen waste, especially among aquatic organisms, and contributes significantly to the nutrient needs of terrestrial organisms, serving as a precursor to 45% of the world's food and fertilizers.
Molar Mass:
In chemistry, the molar mass (M) of a compound is defined as the ratio between the mass of a sample of that compound and the amount of the substance (measured in moles). Molar mass is a volumetric, not molecular, property of a substance. Molar mass is the average of many instances of a compound that often differ in mass due to the presence of isotopes. Most commonly, molar mass is calculated from standard atomic weights, so it is global average and is a function of the relative isotopic abundance of Earth's constituent atoms. Molar mass is suitable for converting the mass of a substance and the amount of a substance into a mass quantity.
Now,
Given:
Weight in grams, w = 2.860 g
Molar mass, m = 17.030 g/mol
We know,
Number of Moles = Weight(w) / Mole Mass (m)
⇒ n = 2.860/ 17.030
By substituting the values,
⇒ n = 0.1679
≈ n = 0.2 moles.
Thus, the response above is right.
Learn more about Moles:
https://brainly.com/question/26416088
#SPJ4
Which one of the following amino acids is MOST likely to participate in hydrogen bonding with water?
valine
alanine
leucine
asparagine
phenylalanine
The amino acid that is most likely to participate in hydrogen bonding with water is asparagine (Asn).
Asparagine contains an amide functional group (-CONH-) in its side chain, which can act as a hydrogen bond donor and acceptor. This allows asparagine to interact with water molecules through hydrogen bonding, making it more hydrophilic (water-loving) than the other amino acids listed. Valine (Val), leucine (Leu), and phenylalanine (Phe) are hydrophobic (water-fearing) amino acids because their side chains do not contain functional groups that can participate in hydrogen bonding with water. Alanine (Ala) contains a methyl functional group (-CH3) in its side chain, which is also hydrophobic and does not participate in hydrogen bonding. Therefore, asparagine is the most likely amino acid to participate in hydrogen bonding with water.
Learn more about amino acids here:
https://brainly.com/question/14583479
#SPJ4
how does atmospheric circulation affect air pollution? how and why have pollution levels in the united states changed over the past several decades? in what types of countries do you find the highest pm2.5 concentrations and why?
The Clean Air Act of 1970 and its subsequent amendments were essential in reducing particulate matter and other types of pollution in America over the past 40 years. According to experts, the regions with the highest PM2.5 concentrations include Asia, Africa, and the Middle East.
Climate changes may be brought on by air pollution emissions. These pollutants, which include greenhouse gases, are frequently called "climate forcers." Climate warming is caused by ozone in the atmosphere, and climate cooling is caused by other PM components. A variety of health effects can result from short-term exposure (over hours or days), including changes in lung function, coughing, wheezing, and shortness of breath, an aggravation of asthma, an increase in respiratory and cardiovascular hospital admissions, and an increase in mortality. Climate change is being fueled by the recent rise in greenhouse gas pollution, which is trapping extra heat. Gases that act as greenhouses, like carbon dioxide, are part of air pollution. By retaining solar heat in the Earth's atmosphere, greenhouse gases contribute to global warming.
Learn more about climate here:
https://brainly.com/question/10440860
#SPJ4
a 0.650 g multivitamin tablet contains 60. mg vitamin C. What is the % Vitamin C in the tablet?
9.23% of the mass of the multivitamin tablet is vitamin C.
What is Vitamin C?Ascorbic acid, another name for vitamin C, is a water-soluble vitamin that is necessary for the creation, maintenance, and repair of several bodily tissues.
How do you determine it?We can use the following formula to determine the amount of vitamin C in the multivitamin tablet:
(Mass of vitamin C / total mass of tablet) x 100% yields the percentage of vitamin C.
Since the mass of the pill is specified in grams, we must first convert the amount of vitamin C from milligrams to grams:
Vitamin C has a mass of 60 mg, or 0.060 g.
The values can then be entered into the formula as follows:
(0.060 g / 0.650 g) x 100% = % vitamin C Vitamin C equals 9.23%
As a result, 9.23% of the mass of the multivitamin tablet is vitamin C.
To know more about vitamin C, visit:
https://brainly.com/question/13653843
#SPJ1
Select the gas with the highest average kinetic energy per mole at 298 K.a. carbon dioxideb. all have the same kinetic energyc. hydrogend. watere. oxygen
The gas with the highest average kinetic energy per mole at 298 K are Carbon dioxide, Hydrogen, water and Oxygen. Hence, option B is correct answer.
The relationship between a gas's temperature and molar kinetic energy is proportional, and the proportionality constant is 32 times the gas constant R. The connection between molar kinetic energy and temperature is seen in the video below below. Half of each gas molecule's mass and the square of its RMS speed are multiplied to create the average kinetic energy of a gas molecule. In terms of math, it looks like this: M stands for mass.
The RMS velocity is vrms. It is determined by multiplying your total energy consumption (in kilowatt-hours) by your maximum electrical use (in kilowatts), then dividing the result by the number of days in the month and the sum of the daily hours. The outcome is a ratio between 0 and 1.06.
Learn more about the Kinetic Energy here: https://brainly.com/question/7694005
#SPJ4
Give the ratio in which hydrogen and oxygen are present in water by volume.
(a) 1:2
(b) 1:1
(c) 2:1
(d) 1:8
The ratio of the hydrogen and oxygen present in water by volume is 2:1
Ratio of hydrogen to oxygen in water?The ratio of hydrogen to oxygen in water is 2:1. This means that for every two hydrogen atoms in a water molecule, there is one oxygen atom. The chemical formula for water is H2O, which indicates that each water molecule contains two hydrogen atoms and one oxygen atom.
This ratio is essential to the chemical properties of water, including its ability to form hydrogen bonds, dissolve many substances, and participate in a wide range of chemical reactions.
Learn more about water:https://brainly.com/question/28465561
#SPJ1
Approximately how many atoms would be in 0.2 moles of iron? Express this is scientific notation.
Answer: 1.2044 x 10^23 atoms in 0.2 moles of iron.
Explanation: The number of atoms in a given amount of a substance can be calculated using Avogadro's number, which is approximately 6.022 x 10^23 atoms per mole. To find the number of atoms in 0.2 moles of iron, we can use the following steps:
1. Start with the given quantity of moles: 0.2 moles of iron.
2. Multiply the given quantity by Avogadro's number: 0.2 moles x (6.022 x 10^23 atoms/mole).
3. Calculate the product: (0.2 moles) x (6.022 x 10^23 atoms/mole) = 1.2044 x 10^23 atoms.
Therefore, there would be approximately 1.2044 x 10^23 atoms in 0.2 moles of iron.
you decide to blow bubbles (soapy water) outside on a snowy day. which answer best explains what has happened to the molecule arrangement of the water?
The water molecule positioning has become farther apart, forming rings. Thus, B is the correct option.
The molecules at the surface of water do not have water molecules above them to cling to, so they grow a stronger bond with the water molecules which are adjacent to them. Thus, the surface of the water develops a thin, flexible ‘skin’. Scientists call this surface tension.
Surface tension acts a bit like an elastic layer. Some insects can walk on water because their weight is little enough so it does not break through the surface tension. If we look carefully at the insect’s feet, we can see that the water looks as if it is stretched.
To learn more about water molecule,
brainly.com/question/23781049
The correct question is:
you decide to blow bubbles (soapy water) outside on a snowy day. which answer best explains what has happened to the molecule arrangement of the water?
A) The WATER molecule ARRANGEMENT has become CLOSER.
B) The WATER molecule ARRANGEMENT has become FARTHER APART, forming rings.
C) The WATER molecule ARRANGEMENT has become CLOSER, forming squares.
#SPJ4
calculate the freezing point of a solution containing 13.1 g fecl3 in 166 g water.
The freezing point of the solution is -2.67° C.
Depression in freezing point = i ×Kf × m.
i for FeCl3 = 3 .
Kf for water = 1.86 K. Kg/mol.
Molar mass of FeCl3 = 162.2 g / mol .
Moles of FeCl3 = 13.1 / 162.2 = 0.08 mol.
Molality = 0.08/ 0.166 = 0.48 mol / kg .
Freezing point =0 - depression in freezing point = - 3 × 1.86 × 0.48
⇒ - 2.67° C.
Learn more about freezing point here:
https://brainly.com/question/30093054
#SPJ4
Step 8: Measure Pressure and Volume with the Book
and 3 kg of Weight
Total the mass on the syringe. Record it in the
correct row of the data table.
kg
Mass on syringe is 3.498, Pressure is 1.37, Volume is 37.5 and hence the PxV would be 51.4. These are consistent with the scientific principle known as Boyle's Law.
A decrease in volume as pressure increased, which is consistent with Boyle's Law. Boyle's Law describes the inverse relationship between pressure and volume for a fixed amount of gas at a constant temperature. This means that as pressure increases, the volume of the gas decreases, and vice versa. This relationship is important in understanding the behavior of gases and has numerous practical applications, such as in the design of engines and other machinery that rely on the expansion and compression of gases.
When conducting experiments, it's always important to have data that supports your hypothesis. In your case, it seems that your data shows a clear relationship between pressure and volume, with a decrease in volume corresponding to an increase in pressure. This is consistent with the scientific principle known as Boyle's Law, which describes the inverse relationship between pressure and volume for a fixed amount of gas at a constant temperature.
To learn more about Boyle's Law Click here:
brainly.com/question/1437490
#SPJ4
Step 8: Measure Pressure and Volume with the Book and 3 kg of Weight, Total the mass on the syringe. Record it in the correct row of the data table
Answer:
1.) 3.498 kg
2.) 1.37 kg/cm^2
3.) C- 37.5 mL
4.) 51.4
Explanation:
This is correct because the person above me was right. I hope this helps!
:)))))
12.0 g of K₂Cr2O7 reacts with 10.0 g of HCl in the following
reaction
K2Cr2O7 + 14HCl → 2CrCl3 + 7H₂O + 3Cl2 + 2KCI.
What is the theoretical yield of CrCl3 ?
According to percent yield, the theoretical yield of chromium chloride is 12.91 grams.
What is percent yield?Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.
294.185 g potassium dichromate gives 316.72 g chromium chloride thus 12 g potassium dichromate gives 12×316.72/294.185=12.91 g.
Thus,the theoretical yield of chromium chloride is 12.91 grams.
Learn more about percent yield,here:
https://brainly.com/question/2506978
#SPJ9
Can you observe burning without actually changing the composition of the material?
Yes, it is possible to observe burning without actually changing the composition of the material. This can happen in cases where the heat generated by the burning process is not sufficient to cause chemical reactions that alter the composition of the material.
What is heat?
Heat is a form of energy that is transferred from one body to another as a result of a difference in temperature. Heat is related to the motion and energy of the particles that make up a substance. As heat is added to a substance, the energy of the particles increases, causing them to move more rapidly and increase the temperature of the substance.
For example, if a piece of paper is held near a flame, it may start to burn, producing heat and light, but the chemical composition of the paper remains unchanged. This is because the heat produced by the combustion reaction is not enough to cause the bonds in the paper to break and form new compounds. The paper is only undergoing physical changes such as charring or melting.
Another example is a wood fire that is not hot enough to cause complete combustion, which is the reaction of wood with oxygen to form carbon dioxide and water. In this case, the wood only undergoes partial combustion, producing heat and light, but its chemical composition remains unchanged.
To learn more about heat:
https://brainly.com/question/13439286
#SPJ1
Which convert light energy into chemical energy during photosynthesis?
The chemical which convert light energy into chemical energy during photosynthesis is Chlorophyll.
Photosynthesis description states that the process simply takes place in the chloroplasts through photosynthetic colors similar as chlorophyll a, chlorophyll b, carotene and xanthophyll. All green shops and a many other autotrophic organisms use photosynthesis to synthesize nutrients by using carbon dioxide, water and sun. The by- product of the photosynthesis process is oxygen. Let us have a detailed look at the process, response and significance of photosynthesis.
The word chlorophyll is deduced from the Greek word khloros( green) and phyllon( leaves). Chlorophyll is a green color that acts as a photoreceptor. It's a color that absorbs light energy and aids in the photosynthesis. Chlorophyll exists in numerous forms, similar as chlorophyll a, chlorophyll b.
Learn more about Photosynthesis:
https://brainly.com/question/16110478
#SPJ4
if 3.907g of carbon combines completely with 0.874g of hydrogen to form a compound, what is the percent composition of this compound?
The composition of the compound is 12%hydrogen and 56% carbon.
Is hydrogen a liquid or a gas?The lightest element is hydrogen. At room temperature and pressure, hydrogen is a gas, but at -423 degrees Fahrenheit, or -253 degrees Celsius, it condenses to a liquid.
What are the benefits of hydrogen?Many additional applications exist for hydrogen. The Haber process is used in the chemical industry to produce cyclohexane and alcohol, that are intermediates in the creation of polymers and medicines, as well as ammonia for agricultural fertilizer. In the course of the oil-refining process, it is also employed to remove sulfur in fuels.
Divide the amount of the each component by the overall number of constituent components in the compound to get the percentage composition, and multiply this result by 100.
mass of C present in compound= 3.907g
mass of H present in compound= 0.847g
The total mass of the compound = 7g
% of C = 3.907 / 7 × 100 = 55.81 ≅ 56%
% of H = 0.847 / 7 × 100 = 12.1 ≅ 12%.
To know more about hydrogen visit:
https://brainly.com/question/28937951
#SPJ1
Chlorine (Cl) has 17 electrons. How many electrons are in the n = 1, n = 2, and n = 3 levels, respectively, of a chlorine atom?
2, 8, 7
2, 6, 9
8, 2, 7
7, 8, 2
Chlorine's electrical configuration will be 2, 8, 7, because its atomic number (Z) is 17. In the L shell, there are eight electrons (second shell).
Chlorine has an atomic mass of 35.45 and an atomic number of 17, which means that each of its atoms contains 17 protons, 17 electrons, and 18 neutrons. As a result, you are already aware that for the element chlorine, the atomic number indicates how many electrons there are. In other words, a chlorine atom contains 17 electrons. This chlorine atom has 17 protons since the atomic number is equal to the number of protons in an atom. Since there are exactly as many electrons as protons in neutral atoms, we can infer that there are 17 electrons total that need to be divided among the electron shells.
Learn more about chlorine here:
https://brainly.com/question/14962130
#SPJ4
what is the rentention factor if the distance traveled by the solvent front is 2.0 cm and the distance th ion is from the solvent fron is 0.20 cm
The retention factor is 0.9 if the solvent front travels a distance of 2.0 cm and the distance between the particle and the solvent front is 0.20 cm.
In a chromatography experiment, the retention factor, also referred to as the Rf value, is a measurement of how far a component moves in relation to the solvent front. It is computed as the ratio of the compound's (also known as the "spot") travel distance to the solvent front's travel distance:
Distance travelled by the spot divided by the distance travelled by the solvent front is the retention factor (Rf).
In your situation, the solvent front moved 2.0 cm, and the ion and solvent front were separated by 0.20 cm. because of this, the distance covered by the
Spot's the ion's distance travelled is calculated as follows: Spot's (the ion's) distance travelled = Spot's (the solvent front's) distance travelled - Spot's (the ion's and the solvent front's) distance apart from each other Spot's (the ion's) distance travelled = 1.8 cm
Now that we know how to compute retention factor:
Rf is the product of the spot's travel distance and the solvent front's travel distance.
Rf = 1.8/2.0 cm.
Rf = 0.9
As a result, this experiment's retention factor is 0.9.
learn more about solvent here:
https://brainly.com/question/30452436
#SPJ4
A balloon has a pressure of 56mmHg and is 1.5 L in volume. If the balloon is forced to fill a volume of 0.56L, what is the pressure of the ballon (in atm)? Assume constant temp. (Boyle's Law). 15 points pls help
Lithium reacts spontaneously with bromine to produce lithium bromide. How many moles of Br2 are needed to make 7. 5 moles LiBr?
7. 5 moles of Br2 are needed to make 7. 5 moles LiBr.
There are two moles of bromine atoms for every mole of lithium bromide, so 7.5 moles of LiBr would require 15 moles of Br2. This is because the chemical equation for the reaction between lithium and bromine is:
The equation for the reaction is:
2Li + Br2 → 2LiBr
In order to make 7.5 moles of LiBr, we need 15 moles of Br2. This is because the ratio of Li to Br2 is Since the ratio is 1:1, we can use the following equation:
[tex]7.5 moles LiBr *\frac{ 1 mol Br2}{1 mol LiBr}= 7.5 moles Br2[/tex]
Therefore, 7.5 moles of Br2 are needed to make 7.5 moles of LiBr.
learn more about lithium Refer:brainly.com/question/1439744
#SPJ4
Question 1 of 5
Which statement correctly compares the weight and the mass of an object?
OA. Both its weight and its mass change based on location.
OB. Neither its mass nor its weight changes based on location.
OC. Its weight changes based on location, but its mass stays the
same.
OD. Its mass changes based on location, but its weight stays the
same.
SUBMIT
Its weight changes based on location, but its mass stays the same.
Which statement correctly compares the weight and the mass of an object?Mass is a measure of the quantity of matter present in an object and therefore, it is always the same. However, the weight of an object differs as the gravitational force on it changes. A Mass indicates the density of an object, while weight specifies its volume.
The dissimilar between mass and weight is that mass is the amount of matter in stuff, while weight is a measure of how the force of gravity acts upon that mass. Mass is the measure of the total matter in a body. Mass is denoted using m or M.
So we can conclude that The distinction between Mass and Weight is Mass is a computation of Inertia and Weight is a consideration of Force.
Learn more about mass here: https://brainly.com/question/19385703
#SPJ1
