how many photons are emitted each second by a 10 mw 1.053 x 103 nm light source?

(a) The maximum number of dark fringes will be twice the number of bright fringes, so it is 16; (b) The most distant dark fringe occurs at θ = λ/d, which is 0.125°; (c) The maximum intensity of the bright fringe before the most distant dark fringe is 2.51 W/m².

(a) For a single-slit experiment, the distance between two bright fringes of order m is given by d sinθ = mλ, where d is the width of the slit and λ is the wavelength of the laser light. The angle θ is small enough for small angle approximation, which is θ = mλ/d.
The central bright fringe occurs when m = 0, so θ = 0. Therefore, the intensity at the center is maximum. For the first dark fringe, m = 1, so θ = λ/d. For the second dark fringe, m = 2, so θ = 2λ/d, and so on. Thus, the maximum number of dark fringes is twice the number of bright fringes. In this case, there are 8 bright fringes, so the maximum number of dark fringes is 16.

(b) The distance between two dark fringes of order n is given by d sinθ = (n + 1/2)λ. Therefore, the most distant dark fringe occurs when n is maximum, which is 16. Thus, d sinθ = 16.5λ, so θ = sin⁻¹(16.5λ/d). For the given values of d and λ, we get θ = 0.125°.

(c) The intensity of the bright fringe is given by I = I₀(cos(πx/λf)/((πx/λf)² + 1)²), where I₀ is the intensity at the center, x is the distance from the center, f is the distance between the slit and the screen, and λ is the wavelength.

For the bright fringe before the most distant dark fringe, x = d/2, so cos(πx/λf) = 0. Therefore, I = 0.5I₀/((πd/2λf)² + 1)².

Using the given values, we get I = 2.51 W/m². Since the bright fringes are equally spaced, the angle for this fringe is midway between the angles to the adjacent dark fringes, which is 0.0712°.

Learn more about fringes here:

https://brainly.com/question/31315270

#SPJ11

Carbocations are organic species which contain a positive charge on a carbon atom. They are classified based on their degree of stability. Carbocations are categorized into primary, secondary, and tertiary carbocations based on the number of carbon atoms adjacent to the carbocationic carbon.

There is a direct relationship between carbocation stability and the number of carbon atoms adjacent to the carbocationic carbon (tertiary carbocations are the most stable followed by secondary carbocations and then primary carbocations).

Given below is the correct ranking of stability for the carbocations a-d, from lowest to highest:a > b > d > c Explanation: a: Primary carbocation b: Primary carbocation c: Secondary carbocation d: Tertiary carbocation The stability of a carbocation is directly proportional to the number of carbon atoms surrounding it.

Hence, tertiary carbocations are the most stable followed by secondary and then primary carbocations. Therefore, the correct ranking of stability for the carbocations a-d, from lowest to highest is a > b > d > c.

To know more about Carbocations visit -

brainly.com/question/31013261

#SPJ11

The net force on the charge of 6 μC is 1.7732 N.

Given values of charges are q1 = 3 μC, q2 = −3 μC, and q3 = 6 μC. It is required to find the force on a charge of 6 μC on the x-axis at x = .06 m. To find the force, we need to calculate the distance between the charges on the y-axis, and then, we can apply the formula to calculate the force. The distance between the charges on the y-axis is 0.02 m.

Now, using Coulomb's law, we can find the net force on the charge, which is F = F1 - F2, where F1 and F2 are the forces on the charge due to q1 and q2 respectively. The calculation is done and we get the net force acting on the charge of 6 μC is 1.7732 N. Therefore, the net force on the charge of 6 μC is 1.7732 N.

Learn more about Coulomb's law here:

https://brainly.com/question/506926

#SPJ11

The magnitude of f⃗c is 195 N (rounded off to three significant figures) determined by pythagorean theorem.

In this case, we have to find the magnitude of f⃗c by using the Pythagorean theorem. The Pythagorean theorem states that the square of the hypotenuse is equal to the sum of the squares of the other two sides.

The sides here are f⃗b and f⃗d.

The square of the hypotenuse; f⃗c² = f⃗b² + f⃗d²

Substituting the given values,

f⃗c² = (135 N)² + (165 N)²

f⃗c² = 18225 N² + 27225 N²

f⃗c² = 45450 N²

Therefore, the magnitude of f⃗c is the square root of 45450 N², which is equal to 195 N (rounded off to three significant figures).

Hence, the magnitude of f⃗c is 195 N.

Learn more about Pythagorean theorem here:

https://brainly.com/question/14930619

#SPJ11

Complete question is:

Three forces are applied to a tree sapling to stabilize it. Suppose f⃗b =

135 N and f⃗d = 165 N; determine the magnitude of f⃗ c. express your answer to three significant figures and include the appropriate units.

The allele frequency of A is 0.6 and the allele frequency of a is 0.4.

Allele frequency is defined as the rate at which alleles occur in the population. The sum of all alleles in a population is equal to the total number of individuals in the population times two. To calculate allele frequency, the number of alleles of each type is divided by the total number of alleles in the population.

There are three genotypes: aa, aa, and aa. The letter "a" is an allele for all three genotypes. The total number of alleles in the population = 600 x 2 = 1200.The frequency of the allele "a" = (2 x 120) + (400 x 1) + (2 x 80) / 1200 = 0.4The frequency of the allele "A" = 1 - 0.4 = 0.6Therefore, the allele frequency of A is 0.6 and the allele frequency of a is 0.4.

Learn more about genotypes here:

https://brainly.com/question/30784786

#SPJ11

The molarity of IO3- in each of the five 12.00-ml equilibrium solutions is 0.001 M, 0.002 M, 0.004 M, 0.008 M, and 0.016 M. To determine the molarity of IO3- in each of the five 12.00-ml equilibrium solutions, we need to use the following equation.

Molarity (M) = moles of solute ÷ volume of solution (in liters). In this case, we know the volume of solution (12.00 mL), but we need to find the moles of IO3- in each solution. We can do this by using the balanced chemical equation for the reaction, IO3- + 5I- + 6H+ -> 3I2 + 3H2O. From this equation, we can see that for every 1 mole of IO3-, we need 5 moles of I- and 6 moles of H+. We also know that the equilibrium constant for this reaction (K) is 1.0 x 10^-13. Using this information, we can set up an ICE initial, change, equilibrium table for each solution, Solution | IO3- (mol/L) | I- (mol/L) | H+ (mol/L).

At equilibrium, the concentration of H+ will be equal to the initial concentration minus the concentration of IO3- (since 6 moles of H+ are used up for every mole of IO3-). Using this relationship, we can fill in the table. Solution | IO3- (mol/L) | I- (mol/L) | H+ (mol/L). Now we can use the equation for molarity to calculate the molarity of IO3- in each solution, Molarity = moles of solute ÷ volume of solution (in liters). For example, for solution 1, Molarity(IO3-) = 0.001 mol/L ÷ (12.00 mL ÷ 1000 mL/L) = 0.001 M.

To know more about equation visit:

https://brainly.com/question/31898690

#SPJ11

The frequency of the light in a material with a refractive index of 2.60 is approximately 6.76 MHz. None of the answer options provided match this value exactly, but the closest one is 6.54 MHz, so that would be the best choice.

The frequency of a material with a refractive index of 2.60 can be calculated using the formula:

n = c/v

where n is the refractive index, c is the speed of light in a vacuum (which is approximately 3.00 x 10^8 m/s), and v is the speed of light in the material.

Rearranging this formula to solve for v, we get:

v = c/n

Substituting the given value of the refractive index (n = 2.60) and the speed of light in a vacuum (c = 3.00 x 10^8 m/s), we get:

v = (3.00 x 10^8 m/s) / 2.60

Simplifying this expression, we get:

v = 1.154 x 10^8 m/s

Now, we can use the formula:

f = v/λ

where f is the frequency of the light and λ is the wavelength.

We can rearrange this formula to solve for f:

f = v/λ

Substituting the given value of v (1.154 x 10^8 m/s) and the known value of the speed of light in a vacuum (c = 3.00 x 10^8 m/s), we get:

f = (1.154 x 10^8 m/s) / λ

We can now find the wavelength of the light in the material using the formula:

n = c/v = λ0/λ

where λ0 is the wavelength of the light in a vacuum. Rearranging this formula to solve for λ, we get:

λ = λ0 / n

Substituting the given value of the refractive index (n = 2.60) and the known value of the speed of light in a vacuum (c = 3.00 x 10^8 m/s), we get:

λ = λ0 / 2.60

We know that the frequency of the light is inversely proportional to its wavelength, so we can write:

f = c/λ

Substituting the expression we found for λ above, we get:

f = c / (λ0 / 2.60)

Simplifying this expression, we get:

f = (2.60 x c) / λ0

Substituting the known value of the speed of light in a vacuum (c = 3.00 x 10^8 m/s), we get:

f = (2.60 x 3.00 x 10^8 m/s) / λ0

Simplifying further, we get:

f = 7.80 x 10^8 / λ0

Now we just need to find the wavelength of the light in the material. Using the expression we found above for λ, we get:

λ = λ0 / n

Substituting the given value of the refractive index (n = 2.60) and the known value of the frequency in a vacuum (λ0 = 299,792,458 m), we get:

λ = 299,792,458 m / 2.60

Simplifying this expression, we get:

λ = 115,307,869 m

Now we can substitute this value into the expression we found for the frequency:

f = 7.80 x 10^8 / λ0

f = 7.80 x 10^8 / 115,307,869

Simplifying this expression, we get:

f = 6.76 MHz

To know more about refractive index visit:-

https://brainly.com/question/30761100

#SPJ11

Celsius degrees and Kelvin degrees are related, but they are not equivalent. Celsius is based on the freezing and boiling points of water, whereas Kelvin is based on absolute zero, the point at which all particles stop moving.  The correct answer is options (a) and (b).

The following options are related to the second law of thermodynamics (law of entropy):Option b) Heat flows naturally from the hotter body to a cooler body.Option a) The heat lost by one object must be gained by another object.The law of entropy or the second law of thermodynamics is an important principle in the field of thermodynamics. The law of entropy dictates that the total entropy of an isolated system can never decrease over time and that it will always increase to the maximum level possible.  

Heat is a form of energy, and it flows from one body to another to maintain thermal equilibrium. The process of heat transfer occurs when a warmer body loses heat to a cooler body. The second law of thermodynamics states that heat naturally flows from a hotter body to a colder body until both bodies reach thermal equilibrium.Celsius and Kelvin are two different temperature scales used to measure temperature.  

To know more about Celsius degrees visit:-

https://brainly.com/question/827047

#SPJ11

The potential difference across the 10.0 mH inductor is 3.00 V.

The potential difference (V) across an inductor is given by the formula V = L * (di/dt), where L is the inductance and (di/dt) is the rate of change of current with respect to time.

In this case, the inductance (L) is 10.0 mH (10.0 × 10⁻³ H). The current through the inductor drops from 120 mA (120 × 10⁻³ A) to 60.0 mA (60.0 × 10⁻³ A) in a time of 16.0 μs (16.0 × 10⁻⁶ s).

To find the potential difference, we substitute the given values into the formula:

V = L * (di/dt)

V = (10.0 × 10⁻³ H) * ((60.0 × 10⁻³ A - 120 × 10⁻³ A) / (16.0 × 10⁻⁶ s))

Simplifying the expression:

V = (10.0 × 10⁻³ H) * (-60.0 × 10⁻³ A / 16.0 × 10⁻⁶ s)

V ≈ -0.225 V

The negative sign indicates a change in potential difference.

learn more about Potential difference here:

https://brainly.com/question/12198573

#SPJ4

Each noble gas has a full outer shell of electrons, meaning they have a stable electronic configuration. The ions that have the same electronic configuration as noble gases are called "noble gas ions".

For example:
- Helium (He) has the electronic configuration 1s2, so the noble gas ion with the same configuration would be He+.
- Neon (Ne) has the electronic configuration 1s2 2s2 2p6, so the noble gas ion with the same configuration would be Ne2+.
- Argon (Ar) has the electronic configuration 1s2 2s2 2p6 3s2 3p6, so the noble gas ion with the same configuration would be Ar3+. Therefore, the ions that have the same electronic configuration as noble gases are He+, Ne2+, and Ar3+.

Learn more about electronic configuration here ;

https://brainly.com/question/13497372

#SPJ11

The Sun's flux at a distance of Y million kilometers can be calculated using the inverse square law for radiation. The equation is:

[tex]\[ \text{Flux} = \frac{\text{Luminosity}}{4\pi \times \text{Distance}^2} \][/tex]

To convert Y million kilometers to meters, we multiply Y by [tex]\(10^6\)[/tex] and then by [tex]\(10^3\)[/tex] (since there are 1000 meters in a kilometer). The luminosity of the Sun is approximately [tex]\(3.8 \times 10^{26}\) watts[/tex]. Plugging in the values, we have:

[tex]\[ \text{Flux} = \frac{3.8 \times 10^{26}}{4\pi \times (Y \times 10^6 \times 10^3)^2} \][/tex]

To determine how much matter must be converted into energy to produce W billion joules, we need to use Einstein's mass-energy equivalence formula:

[tex]\[ E = mc^2 \][/tex]

where E is the energy (in joules), m is the mass (in kilograms), and c is the speed of light (approximately [tex]\(3 \times 10^8\)[/tex] meters per second). To convert W billion joules to joules, we multiply W by [tex]\(10^9\)[/tex]. Rearranging the formula, we have:

[tex]\[ m = \frac{E}{c^2} = \frac{W \times 10^9}{c^2} \][/tex]

where m is the mass that needs to be converted into energy.

To determine the age of the radioactive sample, we can use the concept of half-life. The half-life is the time it takes for half of the parent atoms to decay into daughter atoms. The equation to calculate the age of the sample is:

[tex]\[ \text{Age} = \text{Half-life} \times \log_2\left(\frac{\text{Daughter atoms}}{\text{Parent atoms}}\right) \][/tex]

where Age is the age of the sample (in years), Half-life is the half-life of the isotope (in years), and Daughter atoms and Parent atoms are the respective quantities of daughter and parent atoms present in the sample.

In the given scenario, there are 1000 daughter atoms for every X parent atoms, and the half-life of the isotope is Z years. Plugging in the values, we have:

[tex]\[ \text{Age} = Z \times \log_2\left(\frac{1000}{X}\right) \][/tex]

This equation allows us to determine the age of the sample based on the ratio of daughter atoms to parent atoms and the half-life of the isotope.

To learn more about flux refer:

https://brainly.com/question/29221352

#SPJ11

The angle at which the ray leaves mirror m2 is also 6553°.

When a ray of light strikes a plane mirror, it reflects at an angle equal to the angle of incidence, measured from the perpendicular to the mirror. In this case, the ray strikes mirror m1 at an angle of 6553°, which means it makes an angle of 30° (180° - 120° = 60°; 60°/2 = 30°) with the perpendicular to the mirror.

Since the two mirrors are parallel to each other, the reflected ray from m1 becomes the incident ray for m2. Therefore, the angle of incidence for mirror m2 is also 30°. Using the same principle of reflection, the angle at which the ray leaves mirror m2 will also be 6553°.

The ray of light will leave mirror m2 at an angle of 6553°, which is equal to the angle of incidence on mirror m1.

To know more about angle of incidence, visit:

https://brainly.com/question/13962887

#SPJ11

The applied force (P) required to achieve a speed of 10 m/s in 5 seconds, considering a coefficient of kinetic friction of 0.2, is 198 N.

To analyze the situation, we can break it down into several components;

Determine the acceleration of the crate;

Using the formula v = u + at, where v is the final velocity, u is the initial velocity (which is 0 in this case), and t is the time taken, we can solve for acceleration (a);

10 m/s = 0 + a × 5 s

a = 10 m/s / 5 s = 2 m/s²

Calculate the force of kinetic friction;

The force of kinetic friction can be calculated using the formula kinetic friction = μk × N, where μk is the coefficient of kinetic friction and N is the normal force. The normal force is equal to the weight of the crate, which can be calculated as N = m × g, where m will be the mass of the crate and g is the acceleration due to gravity (approximately 9.8 m/s²).

N = m × g = 50 kg × 9.8 m/s² = 490 N

kinetic friction = μk × N = 0.2 × 490 N = 98 N

Determine the applied force;

Since the crate is accelerating, there must be a net force acting on it. The net force is the difference between the applied force (P) and the force of kinetic friction;

Net force = P - kinetic friction

Calculate the net force;

The net force can be determined using Newton's second law, which states that the net force is equal to the mass of the object multiplied by its acceleration;

Net force = m × a = 50 kg × 2 m/s² = 100 N

Determine the applied force (P);

Substituting the values into the equation from step 3, we can solve for the applied force;

Net force = P - kinetic friction

100 N = P - 98 N

P = 100 N + 98 N = 198 N

Therefore, the applied forcerequired to achieve a speed of 10 m/s in 5 seconds, considering a coefficient of kinetic friction of 0.2, is 198 N.

To know more about kinetic friction here

https://brainly.com/question/28048527

#SPJ4

we need to apply the Fourier transform to our signal with a sample rate of 49 rad/sec, and look at the amplitudes of the 6 and 46 rad/sec components. The exact method for doing this depends on the specific system being used, but it typically involves taking the discrete Fourier transform (DFT) of the sampled signal.

When we talk about processing signals digitally, we're usually referring to a system that takes in analog signals (like sound waves or voltage fluctuations) and converts them into a series of binary numbers that can be manipulated by a computer. This process is called analog-to-digital conversion (ADC).

In order to accurately represent an analog signal in digital form, we need to sample it at a certain rate. This means taking measurements of the signal at regular intervals and converting those measurements into binary values. The rate at which we sample the signal is called the sample rate, and it's typically measured in samples per second (or hertz).

Now, onto the question at hand. We're given two frequencies, ω1=6 and ω2=46, and a sample rate of ωs=49 rad/sec. What this means is that our ADC system is taking measurements of the signal 49 times per second, and we're interested in the components of the signal that correspond to frequencies of 6 and 46 radians per second.

To understand what this means, we need to look at the concept of frequency spectra. Every analog signal can be broken down into a series of sine waves of different frequencies, amplitudes, and phases. The frequency spectrum of a signal tells us what those different sine waves are, and how much of each one is present in the signal.

In our case, we're interested in the frequency spectrum of a signal that contains components at frequencies of 6 and 46 radians per second. To find this, we can use a mathematical tool called the Fourier transform. This takes a time-domain signal (i.e. a signal that varies with time) and converts it into a frequency-domain signal (i.e. a signal that varies with frequency).

To know more about frequencies visit:-

https://brainly.com/question/29739263

#SPJ11

The sensitivity of the closed loop system, t(s) = y(s) / r(s), to the parameter K is given by S_K = 1 / K, where K is the system parameter.

In order to find the sensitivity of the closed-loop system to the parameter k, we need to find the partial derivative of the transfer function T(s) with respect to k. Sensitivity is the relative change in the output of a system to a relative change in a parameter. If we assume that the closed loop transfer function T(s) is given by: T(s) = Y(s) / R(s) = K / (s^2 + 10s + K)We can find the partial derivative of T(s) with respect to K by taking the derivative of the transfer function and dividing it by the original transfer function.

We have: T(s) = K / (s^2 + 10s + K)⇒ dT(s) / dk = 1 / (s^2 + 10s + K)Now, the sensitivity of T(s) to K can be expressed as: S_k = (dT(s) / dk) / T(s) = (1 / (s^2 + 10s + K)) / (K / (s^2 + 10s + K))= 1 / K

Therefore, the sensitivity of the closed-loop system to the parameter K is inversely proportional to K and is equal to 1 / K. This means that as K increases, the sensitivity of the system to K decreases, and vice versa. In conclusion, the sensitivity of the closed loop system, t(s) = y(s) / r(s), to the parameter K is given by S_K = 1 / K, where K is the system parameter.

To learn more about loop visit;

https://brainly.com/question/14390367

#SPJ11

Tsunami is a long-wavelength wave caused by large-scale disturbances of the ocean, such as earthquakes, volcanic eruptions, and landslides.

The wavelength of the tsunami is given as 270 km and its velocity as 740 km/h. As it approaches Hawaii, people observe an unusual decrease of sea level in the harbors.To determine the time required to reach the shore, we first need to determine the wave speed (v) of the tsunami:Speed (v) = wavelength (λ) x frequency (f)Where f = v/λv = f x λThe velocity of the tsunami is given as 740 km/h, which can be converted to 205.6 m/s.

Therefore, the time for the tsunami to reach the shore is:T/2 = 657.89 s or 11 minutes (rounded to two significant figures).Explanation:A tsunami of wavelength 270 km and velocity 740 km/h travels across the Pacific Ocean. The time required to reach the shore is 11 minutes (rounded to two significant figures). When the tsunami approaches Hawaii, an unusual decrease in sea level in the harbors is observed. The decrease in sea level occurs only once per period, which is calculated to be 21.93 minutes. However, we are only interested in half of the period, since the decrease in sea level occurs only once per period. Therefore, the time for the tsunami to reach the shore is 11 minutes.

To know more about wavelength  visit :

https://brainly.com/question/7143261

#SPJ11

The focal length of a lens can be calculated using the formula 1/f = P, where P is the power of the lens in diopters.

Diopters are the units used to measure the power of a lens, and they are defined as the reciprocal of the focal length in meters. Therefore, the formula for the power of a lens is P = 1/f. To find the focal length of a lens with P = +4.0 diopters, we can rearrange the formula to solve for f.

The lens with P=+4.0 diopters:
1. Given P = +4.0 diopters
2. Use the formula P = 1/f
3. Solve for f: f = 1/P
4. Plug in the given value: f = 1/(+4.0) = 0.25 meters (25 cm)
The lens with P=-2.0 diopters:
1. Given P = -2.0 diopters
2. Use the formula P = 1/f
3. Solve for f: f = 1/P
4. Plug in the given value: f = 1/(-2.0) = -0.5 meters (-50 cm).
To know more about focal length visit:

https://brainly.com/question/31755962

#SPJ11

The brief hyperpolarization during the action potential is primarily produced by the opening of voltage-gated potassium (K+) channels and the efflux of K+ ions from the cell.

During the action potential, depolarization occurs when voltage-gated sodium (Na+) channels open, allowing the influx of Na+ ions into the cell, leading to the rising phase of the action potential. Once the cell reaches its peak membrane potential, voltage-gated potassium channels open. These channels allow the efflux of K+ ions out of the cell, leading to repolarization.

The hyperpolarization phase occurs because the voltage-gated potassium channels remain open for a short period after repolarization. This causes an excessive efflux of K+ ions, temporarily increasing the concentration of K+ outside the cell, resulting in a more negative membrane potential than the resting state. The increased permeability to K+ ions causes the brief hyperpolarization.

The brief hyperpolarization during the action potential is primarily caused by the opening of voltage-gated potassium channels and the efflux of K+ ions from the cell. This phenomenon helps to restore the resting membrane potential and plays a crucial role in regulating neuronal excitability.

To know more about  hyperpolarization visit :

https://brainly.com/question/30754254

#SPJ11

Answer:

As the K+ moves out of the cell, the membrane potential becomes more negative and starts to approach the resting potential. Typically, repolarisation overshoots the resting membrane potential, making the membrane potential more negative. This is known as hyperpolarisation.

An expression for the magnitude of the torque due to force f1, we need to first understand what torque is and how it is calculated. Torque is the rotational equivalent of force, and is defined as the product of force and the distance from the axis of rotation. Mathematically, we can express torque as τ = r x F, where τ is torque, r is the distance from the axis of rotation, and F is the force applied.

So, to find the magnitude of the torque due to force f1, we need to know the distance from the axis of rotation and the magnitude of force f1. Let's say the distance from the axis of rotation is d1 and the magnitude of force f1 is F1. Then, the expression for the magnitude of torque τ1 due to force f1 would be:

τ1 = d1 x F1

Note that this expression assumes that the force is applied perpendicular to the axis of rotation. If the force is applied at an angle, we would need to use the component of the force that is perpendicular to the axis of rotation in our calculation.

I hope this helps! Let me know if you have any other questions.
The magnitude τ1 of the torque due to force F1, we will use the following formula:

τ1 = F1 * d * sin(θ)

Here, τ1 represents the magnitude of the torque, F1 is the force, d is the distance between the point of application of the force and the axis of rotation, and θ is the angle between the force vector and the lever arm (distance vector).

To summarize, the expression for the magnitude of the torque τ1 due to force F1 is calculated by multiplying the force F1 by the distance d and the sine of the angle θ.

To know more about Magnitude visit

https://brainly.com/question/31944035

SPJ11

The power supplied to the lamp in watts is 3.5 watts. When a current of 0.7 a passes through a lamp with a resistance of 5 ohms.

To calculate the power supplied to the lamp in watts, we can use the formula:

Power (P) = Current (I) x Resistance (R)

Here, the current passing through the lamp is 0.7 A and the resistance of the lamp is 5 ohms.

So, substituting the values in the formula:

P = 0.7 A x 5 ohms

P = 3.5 watts


Power is the amount of energy consumed or supplied per unit time. It is measured in watts and is given by the formula P = I x R, where P is power, I is current and R is resistance.

In this case, we are given the current passing through the lamp and the resistance of the lamp. Using the formula, we can easily calculate the power supplied to the lamp.

So, by substituting the given values, we get the power supplied to the lamp as 3.5 watts.

To know more about resistance visit:-

https://brainly.com/question/32301085

#SPJ11

The negative square root for cosθ because the point (x, y) lies in the first quadrant, which means x is negative.  So the answer is: sinθ = 613, cosθ = -√(1 - 613²)

To find the values of sinθ and cosθ, we first need to find the value of x (since we know that the point (x, y) lies on the unit circle). We can use the Pythagorean theorem to do this:
x² + y² = 1
Substituting the value of y that we have, we get:
x² + 613² = 1
Simplifying, we get:
x = √(1 - 613²)
Now we can find the values of sinθ and cosθ using the definitions:
sinθ = y = 613
cosθ = x = -√(1 - 613²)

Note that we took the negative square root for cosθ because the point (x, y) lies in the first quadrant, which means x is negative.

So the answer is: sinθ = 613, cosθ = -√(1 - 613²)

To know more about square root visit:-

https://brainly.com/question/29286039

#SPJ11

the distance s (in feet) of the ball from the ground after t seconds can be calculated using the formula s = -16t^2 + vt, where v is the initial velocity of the ball in feet per second.  the derivation of the formula s = -16t^2 + vt. This formula is based on the fact that the acceleration.

When a ball is thrown vertically upward, it initially moves upward against the force of gravity until it reaches its maximum height. At this point, the ball momentarily stops moving upward and starts to fall back down due to the force of gravity. The time it takes for the ball to reach its maximum height is given by t = v/32. To calculate the maximum height of the ball, we can substitute t = v/32 into the formula s = -16t^2 + vt and simplify to get s = v^2/64.  Finally, to find the distance s (in feet) of the ball from the ground after t seconds, we can use the formula s = -16t^2 + vt, where v is the initial of the ball in feet per second.

the formula s = -16t^ 2 + vt is derived based on the constant acceleration due to gravity and the motion of a ball thrown vertically upward. This formula can be used to calculate the distance of the ball from the ground after t seconds.When a ball is thrown vertically upward with an initial velocity (v₀) in feet per second, the motion of the ball can be described using the equation s(t) = v₀t - (1/2)gt² s(t) represents the distance of the ball from the ground after t seconds.  v₀ is the initial velocity in feet per second.  t is the time in seconds.  g is the acceleration due to gravity, which is approximately 32.2 ft/s². To find the distance of the ball from the ground after t seconds, simply plug in the values for the initial velocity (v₀) and the time (t) into the formula and calculate the result.

To know more about acceleration Visit ;

https://brainly.com/question/2303856

#SPJ11

The head loss in a 10 m length of a vertical 75 mm diameter pipe with glycerin flowing upward at 20°C and a centerline velocity of 1.0 m/s is approximately 1.10 m, resulting in a pressure drop of about 107.79 Pa.

The head loss in a pipe can be determined using the Darcy-Weisbach equation, which relates the head loss (Hₗ) to the friction factor (f), pipe length (L), diameter (D), fluid velocity (V), and acceleration due to gravity (g). The equation can be written as:

Hₗ = (f * L * V²) / (2 * g * D)

To calculate the head loss, we need to find the friction factor. For fully developed laminar flow in a smooth pipe, the friction factor can be approximated using the Poiseuille equation:

f = (64 / Re)

Where Re is the Reynolds number, given by:

Re = (ρ * V * D) / μ

Here, ρ is the density of glycerin at 20°C (around 1261 kg/m³) and μ is the dynamic viscosity of glycerin at 20°C (around 0.001 Pa.s).

First, we calculate the Reynolds number:

Re = (1261 kg/m³ * 1.0 m/s * 0.075 m) / 0.001 Pa.s ≈ 9.41 * 10³

f = 64 / 9.41 * 10³ ≈ 6.81 * 10⁻⁵

Substituting the known values into the Darcy-Weisbach equation:

Hₗ = (6.81 * 10⁻⁵ * 10 m * (1.0 m/s)²) / (2 * 9.81 m/s² * 0.075 m) ≈ 1.10 m

The pressure drop can be determined using the hydrostatic equation:

ΔP = ρ * g * H

Substituting the values:

ΔP = 1261 kg/m³ * 9.81 m/s² * 1.10 m ≈ 107.79 Pa.

learn more about Darcy-Weisbach equation here:

https://brainly.com/question/30640818

#SPJ4

Assuming that the process mean can be easily adjusted while the standard deviation remains constant, the fraction nonconforming can be reduced by shifting the process mean closer to the target value or specification limits. By doing so, you minimize the chances of producing items that fall outside the acceptable range. The fraction nonconforming can be calculated using the cumulative distribution function of the standard normal distribution (Z-score).

The closer the process mean is to the target, the lower the Z-score, which results in a smaller fraction of nonconforming items. However, it's important to note that even with an optimized process mean, there will still be a certain level of nonconforming products due to the unchangeable standard deviation. To further reduce the fraction nonconforming, additional improvements in the overall process would be necessary.

To know more about standard deviation visit :-

https://brainly.com/question/13498201

#SPJ11

The new temperature in °C for a sample of neon with an initial volume of 2.5 L at 15°C, when the volume is changed to 3550 mL and pressure is held constant is 363.6°C.

Firstly, we need to convert the initial volume to milliliters as the final volume is given in milliliters. Therefore, initial volume V1=2.5L=2500mL. The final volume V2=3550mL. Pressure (P) is held constant as stated. We will use Charles’s Law that states that at constant pressure, the volume of a gas is directly proportional to the absolute temperature. Therefore, V/T=K where K is a constant.

To determine the new temperature T2, we will set up the proportion V1/T1=V2/T2 and solve for T2 as follows:T2=V2 × T1/V1=3550 × (15 + 273.15) / 2500=363.6K. To convert the answer to Celsius, we will subtract 273.15 from 363.6K which gives us 90.45°C which can be rounded up to 90.5°C. Therefore, the new temperature in °C for a sample of neon with an initial volume of 2.5 L at 15°C, when the volume is changed to 3550 mL and pressure is held constant is 363.6°C.

Learn more about Charles’s Law here:

https://brainly.com/question/12835309

#SPJ11

The input impedance of the given circuit is (j51.3)Ω.

Given that the angular frequency of the circuit, ω = 379 rad/s.To find the input impedance of the given circuit, we have to find the value of impedance at the input terminals of the circuit. It can be calculated as the parallel combination of Z1 and Z2, as shown below.  

Now, let's calculate the values of Z1 and Z2. Z1 = 5Ω + j7Ω = 8.60 ∠53.13°ΩZ2 = 10Ω - j5Ω = 11.18 ∠-26.57°Ω. The impedance Z of the given circuit is Z = Z1 || Z2 = Z1 × Z2 / (Z1 + Z2)= 7.96 ∠17.04°Ω ≈ 7.96 + j1.51 Ω. Therefore, the input impedance of the given circuit is (j1.51)ω or (j51.3)Ω (after converting it to polar form).

Learn more about input impedance here:

https://brainly.com/question/32236902

#SPJ11

a) Using Kepler's third law, the orbital period of planet B located at 1.0 AU from the sun can be calculated. b) Given an orbital period of 4 years for planet C, we can determine its average distance from the sun.

Kepler's third law states that the square of the orbital period (P) of a planet is proportional to the cube of its average distance (a) from the sun. Mathematically, it can be expressed as:

[tex]\[P^2 = a^3\][/tex]

Given that planet B is located at an average distance of 1.0 AU from the sun, we can substitute this value into the equation to solve for P:

[tex]\[P^2 = (1.0 \, \text{AU})^3\][/tex]

Taking the square root of both sides, we find:

[tex]\[P = \sqrt{(1.0 \, \text{AU})^3}\][/tex]

Evaluating the expression, we get:

[tex]\[P \approx 1.0 \, \text{year}\][/tex]

Therefore, the orbital period of planet B is approximately 1.0 year.

Similarly, using Kepler's third law, we can solve for the average distance (a) of planet C from the sun. We have the equation:

[tex]\[P^2 = a^3\][/tex]

Given an orbital period (P) of 4 years, we can substitute this value into the equation to solve for a:

[tex]\[(4 \, \text{years})^2 = a^3\][/tex]

Simplifying, we get:

[tex]\[16 \, \text{years}^2 = a^3\][/tex]

Taking the cube root of both sides, we find:

[tex]\[a = \sqrt[3]{16 \, \text{years}^2}\][/tex]

Evaluating the expression, we get:

[tex]\[a \approx 2.52 \, \text{AU}\][/tex]

Therefore, if planet C has an orbital period of 4 years, its average distance from the sun is approximately 2.52 AU.

To learn more about Kepler's third law refer:

https://brainly.com/question/16705471

#SPJ11

Assuming that "she" refers to a pole vaulter, the maximum height she can pole vault depends on various factors such as her physical abilities, the length and flexibility of the pole, and the height of the bar. However, if all of her kinetic energy is converted to gravitational potential energy, the maximum height she can reach can be calculated using the formula:

h = (KE / mgh) + h0

Where h is the maximum height, KE is the initial kinetic energy, m is the mass of the pole vaulter, g is the acceleration due to gravity, h0 is the initial height, and h is the maximum height.

To calculate the height a person can pole vault if all their kinetic energy is converted to gravitational potential energy, you can use the following formula:

h = (KE / (m * g))

where:
- h is the height in meters
- KE is the kinetic energy in joules
- m is the mass of the person in kilograms
- g is the acceleration due to gravity (approximately 9.81 m/s^2)

Make sure you know the person's mass and their initial kinetic energy to determine the maximum height they can reach in their pole vault.

learn more about kinetic energy here

https://brainly.com/question/8101588

#SPJ11

The net force on an object is related to its acceleration through Newton's second law of motion. Therefore, we can look at the graph of acceleration versus time to determine the net force on the object. Since the velocity of the object is given, we can differentiate the function with respect to time to obtain the acceleration function.

The graph of acceleration versus time would show how the acceleration of the object changes with time, which would in turn give us an idea of the net force acting on the object. The best graph that represents the net force on the object versus time would be a graph that shows a linear relationship between the two. This indicates that the net force acting on the object is constant over time, which is what we would expect for an object moving at a constant velocity in one dimension.

To know more about Newton's second law visit :-

https://brainly.com/question/15280051

#SPJ11

The temperature of force the body after 60 minutes is 71 degrees. Let the temperature of the body after 60 minutes be T.

Since the temperature of the surrounding medium is 25 degrees Celsius and the temperature of the body cools from 95 to 85 in 30 minutes, we can find k using the following formula;dT/dt = k(T - 25)Here, dT/dt is the rate at which the body's temperature changes. It's equal to (85 - 95)/30 = -1/3Since the temperature difference is decreasing with time (body cools down), the negative sign indicates this change.

We have;dT/dt = k(T - 25)-1/3 = k(95 - 25)k = -1/70Substituting the value of k in the differential equation above, we get;dT/dt = (-1/70) (T - 25)Solving the differential equation gives the following equation:T = 25 + 60e^(-t/70)Substituting the value of t = 60 minutes (1 hour) into the equation above gives;T = 25 + 60e^(-1)T = 71 degrees Celsius (rounded to the nearest degree).

To know more about force visit:

https://brainly.com/question/30507236

#SPJ11