How many times should you read the label information before you open the container?

Answer:

False

Explanation:

A model is a representation of a more complex system.

Answer:

False

Definition:

The scientific model is a condensed depiction of complicated or invisible to the human sight scientific systems, such an atom or a solar system. Although this representation is simplified, it is nevertheless accountable for producing all of the original systems' essence, substance, and behavior. This allows the models to be employed in scientific studies and research and to provide tangible outcomes that accurately reflect the actual systems.

What is a scientific model?

A scientific model is a simplification that roughly represents the real world while making it simple to think about issues, gain clarity and understanding, and perhaps forecast behavior.

Say, "The world is flat!" as an example. Actually, if you were alive 10,000 years ago, this estimate wasn't so awful. In general, everything you see around you suggests that the globe *is* flat, especially if you're living on a large grassy plane. Forget some of the boundary difficulties around the "edge of the globe"; perhaps it just never ends.

Then, though, you could start to see ships if you go to the ocean and stare out across that huge horizon. The sail is shown first, followed by a little portion of the mast, and then the ship's body. Hmm. That must imply that the spacecraft was underneath the earth's "flat surface," or...

The globe that is the earth (Or having a burrito-like form. But for now, let's stick with spherical.) That's fascinating. That would indicate that if I go from one location on Earth to another and keep moving, I would ultimately return to the original location. This proposition is testable!

The Earth is not a perfect spherical, of course. Its core protrudes a little bit. But a sphere is a reasonably good scientific model for the Earth for all everyday practical purposes (with the exception of things like GPS and satellite communications, etc.).

Similar to this, other scientific models should be as straightforward as feasible in order to explain occurrences and offer some level of testable prediction potential.

Thanks,
Eddie

Answer:

2H+(aq) is the net ionic equation.

This means that you must take 2.5ml of the stock solution and make up to mark with 7.5 ml of water. You should add acid to water and not water to acid.

The terms ACID (atomicity, consistency, isolation, and durability) refer to a set of characteristics of database transactions that are meant to ensure data validity despite errors, power outages, and other unforeseen circumstances.

A transaction is a series of database activities that adhere to the ACID principles and can be thought of as one logical operation on the data in the context of databases. For instance, a transfer of money between bank accounts, even when it involves many adjustments like debiting one account and crediting another, is only one transaction.

Building on previous work by Jim Gray, who identified atomicity, consistency, and durability but not isolation when describing the transaction concept, Andreas Reuter and Theo Härder created the acronym ACID in 1983.

To learn more about acid from the given link:

https://brainly.com/question/25148363

#SPJ4

The weight of the column is 1224.73 pounds.

r = 380 mm/2 = 190 mm

r = 0.190 m; a radius of a concrete column

l = 2 m; a length of a concrete column

d = 2.45 Mg/m³; density of a concrete

V = r² × π × l

V = (0.190 m)² × 3.14 × 2 m

V = 0.227 m³; volume of a column

m = d × V

m = 2.45 Mg/m³ × 0.227 m³

m = 0.555 Mg

1 Mg = 1000 kg

m = 555.4 kg; mass of concrete

W = 555.4 kg × 9.8 m/s²

W = 5443.25 N

W = 5443.25 N × 0.225 Ibf/N

W = 1224.73 Ibf; weight of a concrete

The weight of an object is the amount of force acting on the object due to gravity. SI unit for weight is newton (N).

More about weight: brainly.com/question/17306051

#SPJ4

The mole fraction of glycerol in this solution is 3.58%.

d = 1.037 g/ml; density of the solution

M(HOCH₂CH(OH)CH₂OH) = 92.095 g/mol; molar mass of glycerol

m= 100 ml × 1.037 g/ml

m= 103.7 g; mass of 100 ml of the solution

m(HOCH₂CH(OH)CH₂OH) = 0.16 × 103.7 g

m(HOCH₂CH(OH)CH₂OH) = 16.592 g; mass of glycerol

n(HOCH₂CH(OH)CH₂OH) = 16.592 g ÷ 92.095 g/mol

n(HOCH₂CH(OH)CH₂OH) = 0.180 mol; amount of glycerol

m(water) = 103.7 g - 16.592 g

m(water) = 87.108 g

n(water) = 87.108 g ÷ 18.0153 g/mol

n(water) = 4.835 mol; amount of water

mole fraction = 0.180 mol ÷ (0.180 mol + 4.835 mol)

mole fraction = 0.0358 = 3.58%

More about the mole fraction: brainly.com/question/14783710

#SPJ4

When an electron in a hydrogen atom undergoes the transition from the energy level. The wavelength is 97.3 nm.

The separation between similar points in successive waves of a waveform signal that have traveled across space or along a wire.

1 / λ = -1.097 x 107 m-1 ( 1/nf2 - 1/ni2 )

λ = wavelength in m

nf = final energy level = 1

ni = initial energy level = 7

1 / λ = -1.097 x 107 m-1 (1/16 - 1) = 1.097 x 107 m-1 (-0.9375)

1 / λ = 1.028 x 107 m-1

λ = 9.73x10-8 m = 97.3 nm

Thus, the wavelength, in nanometers, of the spectral line is 97.3 nm.

To learn more about wavelength, refer to the below link:

https://brainly.com/question/4433694

#SPJ1

All halides (nonmetals) could form an ionic compound with magnesium with the formula mgx2.

What are ionic compounds?

A chemical compound known as an ionic compound in chemistry is one that contains ions bound together by the electrostatic forces known as ionic bonding. Despite having both positively and negatively charged ions, or cations and anions, the molecule is generally neutral.

The proportional size of the cations and anions determines how an ionic molecule is structured. Salts, oxides, sulphides, hydroxides, and the majority of inorganic compounds are examples of ionic compounds. The electrostatic forces of attraction between positive and negative ions hold together ionic solids.

All halides or other non metallic ions like OH- that require one electron to satisfy their octet  that is noble gas configuration will form compounds with the formula MgX2.

To learn more about ionic compounds from the given link below,

https://brainly.com/question/11542729

#SPJ4

Answer:

a

Explanation:

I'll explain along side with potassium (k) and Calcium (Ca). the unit for scandium is SC

Sc = 21

Ca = 20

K =19

k = 1s²,2s²,2p⁶,3s²,3p⁶,3d⁰,4s¹

Ca = 1s²,2s²,2p⁶,3s²,3p⁶,3d⁰,4s²

Sc = 1s²,2s²,2p⁶,3s²,3p⁶,3d¹,4s²

if you notice above Sc has 3d¹ while Ca has 3d⁰. This is because Sc is a transition metal

Transition metals are metals whose d-orbital aré partially filled with electron

Explanation:

Sodium is a reactive metal, and so can't be extracted by electrolysis of an aqueous solution.

The main ore of sodium is common salt, sodium chloride.

Calcium chloride is added to the purified ore to lower the melting point from around 800°C to around 600°C, so that energy costs are lowered and this is economical because it saves on electricity used in heating.

The amount of ml for 22% NaCl solution required to formulate the prescription is 139ml.

To find the solution need to formulate prescription, the given data's are,

30% of Nacl solution will have 250 ml

Find for 22%.

Sodium chloride, or salt, is an ionic substance with the chemical formula NaCl that represents a 1:1 ratio of sodium and chloride ions.

The body that required NaCl also known as salt, Sodium Chloride (NaCl) is critical for proper functioning of the human body.

From the given values,

22/100x + 40/100(250-x) = 30/100 × 250

22x + 40(250 - x) = 30 × 250

22x - 40x = 7500 - 10000

18x = 2500

x = 2500/18

x = 138.89ml

Thus, from the metrics given, it is correct to state that the amount of ml of 22% NaCl solution required to formulate the prescription is 139ml.

Learn more about Sodium chloride,

brainly.com/question/24490939

#SPJ4

Yes, a reaction occurs.

When Magnesium nitrate Mg(NO3)2 and iron (II) sulphate (FeSO4) are combined, double displacement reaction takes place.

       AB  + CD →  AD + CB

Ionic equation according to the question-

FeSO4 + Mg(NO3)2 → Fe(NO3)2 + MgSO4

Here, Iron (II) sulphate reacts with Magnesium nitrate to form Iron nitrate and  magnesium sulphate by undergoing double displacement reaction.

To learn more about double displacement reaction refer - https://brainly.com/question/10210271

#SPJ4

Yes, there is a reaction when iron (II) sulphate (FeSO₄) and magnesium nitrate Mg(NO₃)₂ are mixed.

Double displacement reaction occurs when iron (II) sulphate (FeSO₄) and magnesium nitrate Mg(NO₃)₂ are mixed.

Displacement reaction- When a less reactive element is pushed out of a compound that also contains a more reactive ingredient, the result is a displacement reaction. The less reactive element is now pure and left alone following a displacement reaction.

AB + C → A + CB

whereas,

Double displacement reaction- In a double displacement reaction, two compounds swap cations or anions (ions) to create two new molecules.

AB  + CD →  AD + CB

FeSO₄ + Mg(NO₃)₂ Fe(NO₃)₂ + MgSO₄ is the ionic equation in response to the query.

Here, a double displacement reaction occurs between magnesium nitrate and iron (II) sulphate to produce iron nitrate and magnesium sulphate.  

To learn more about double displacement reaction refer- https://brainly.com/question/10210271

#SPJ4

Particles can be arranged in a variety of ways. Particles of liquid gold move closer together as it solidifies. Thus, option D is correct.

When a liquid is cooled and transforms into a solid, freezing takes place. A solid is created when the particles in a liquid eventually cease moving and settle into a stable configuration.

Attractive forces start to capture particles, and a solid's crystals start to take shape.

Therefore, the rearrangement of particles in a physical change describes When liquid gold becomes a solid, its particles get closer together.

Learn more about particle arrangements here:

https://brainly.com/question/13327351

#SPJ1

Answer:

The answer is option D on indeguity

Explanation:

The empirical formula of a compound found to contain 7.353 g of Al and 6.547 g of O is Al2O3.

We are given that

Mass of Al = 7.353 g

Mass of O = 6.547 g

To calculate the moles of the compounds, we need to divide the given mass by their molar mass

Moles of Al = 7.353/27 = 0.272

Moles of O = 6.547/16= 0.409

Now we need to divide the moles by the least common number i.e, 0.272.

Moles of Al/0.272 = 0.272/0.272= 1

Moles of O/0.272= 0.409/0.272 = 1.5

Now, to convert these values into whole numbers we should multiply them by 2

Moles of Al = 2

Moles of O = 3

Thus, the ratio of Al:O = 2:3

Hence, the empirical formula of a compound found to contain 7.353 g of Al and 6.547 g of O is Al2O3.

To know more about "empirical formula", refer to the link given below:

https://brainly.com/question/14425592?referrer=searchResults

#SPJ4

The properties of an ionic compound are as follows:

Thus, the correct options for this question are C and D.

An Ionic compound may be defined as a type of chemical compound that is significantly composed of ions that are held together by electrostatic forces referred to as ionic bonding.

The properties of ionic compounds are determined by the process through which they dissociate from one another when they dissolve in water. For example, NaCl. They are good conductors of heat and electricity.

Therefore, the correct options for this question are C and D.

To learn more about Ionic compounds, refer to the link:

https://brainly.com/question/21796142

#SPJ1

Change in pH is resisted by a buffer on addition of small amount of acid or base.

When a small amount of a strong acid or base is introduced to a buffer, the change in pH does not occur. This is accurate provided that the quantity of strong acid or base supplied does not significantly outweigh the quantity of conjugate base and conjugate acid already in the buffer. The buffering capacity will exceed if an excessive amount of a strong acid or basic is added.

A buffer is a substance that can withstand a change in pH when acidic or basic substances are added. Small additions of acid or base can be neutralized by it, keeping the pH of the solution largely constant. For reactions that call for certain and stable pH ranges, this is significant. The pH range and capacity of buffer solutions determine how much acid or base can be neutralized before there is a change in pH and how much pH will vary.

A buffer is a unique liquid that prevents significant pH level fluctuations. Each buffer that is created has a specific buffer range and buffer capacity. The quantity of base or acid that may be added to a buffer before the pH starts to noticeably shift is known as the buffer capacity.

Learn more about Change in pH here:

https://brainly.com/question/14170114

#SPJ4

The total degrees of freedom for helium are three.

The number of ways that a molecule can move or vibrate in space in gaseous phase is known as degree of freedom. The degree of freedom depends on the total number of atoms and the geometrical structure of atoms.

There are three types of degrees of freedom; rotational, translational and vibrational. The degree of freedom for helium is three for translational motion only.

The degree of freedom for monoatomic is three such in the case of helium. A molecule can have different degrees of freedom for different types. For examples, the degrees of freedom for NH3 is 3 for translational and rotational and six for vibrational.

If you need to learn more about degrees of freedom, click here

https://brainly.com/question/28493796?referrer=searchResults

#SPJ4

On the basis of the characteristics of the "R" group in each amino acid, amino acids can be divided into four general groupings. Polar, nonpolar, electrically charges amino acids are all possible types. The "R" groups on polar amino acids are hydrophilic, meaning they want to come into touch with watery solutions.

What are amino acids?

Organic compounds known as amino acids join with other amino acids to produce proteins. Because the proteins that amino acids create are involved in almost all cellular processes, amino acids are necessary for life. While some proteins serve as structural support, others act as antibodies or enzymes. Although there are hundreds of amino acids in nature, only a set of 20 amino acids are used to make proteins.

On the basis of the characteristics of the "R" group in each amino acid, amino acids can be divided into four general groupings. Polar, nonpolar, electrically charges amino acids are all possible types. The "R" groups on polar amino acids are hydrophilic, meaning they want to come into touch with watery solutions. The hydrophobic (opposite) nonpolar amino acids shy away from contact with fluids. These interactions are crucial for protein folding and provide proteins with their three-dimensional structure.

To learn more about amino acids from the given link below,

https://brainly.com/question/14649293

#SPJ4

The base ionization constant exists as the equilibrium constant for the ionization constant.

The base ionization constant exists as the equilibrium constant for the ionization constant. It is represented as Kb. If the concentration of the solution (C) and the degree of ionization (α)exists known, then the base ionization constant exists measure as follows:

[tex]$K_b=\frac{C \alpha^2}{1-\alpha}$[/tex]

[tex]$K_b=\frac{C \alpha^2}{1-\alpha}$[/tex]

=(0.0800*21%) ²/1-21%

=0.003/1-0.21 =0.0044.

To learn more about Ionization Constant refer to:

https://brainly.com/question/27836331

#SPJ4

Benzoic acid in the presence of [tex]SOCl_2[/tex] gets converted to benzoyl chloride which further gets converted to benzamide when treated with ammonia. Benzamide gets reduced to benzylamine by [tex]LiAlH_4[/tex].

Steps involved in the preparation of benzylamine from benzoic acid:

Step 1:

Benzoyl chloride is formed on replacement of [tex]-OH[/tex] group with [tex]-Cl[/tex] group when benzoic acid is treated with thionyl chloride.

Step 2:

Benzoyl chloride converts to benzamide by the replacement of [tex]-Cl[/tex] group with [tex]-NH_2[/tex] group on treatment with ammonia.

Step 3:

Benzamide is reduced to benzylamine in the presence of [tex]LiAlH_4[/tex]. The strong reducing agent converts the carbonyl group (C=O) to [tex]-CH_2-[/tex] group.

Benzylamine is a chemical compound that is organic in nature. A primary amine molecule called benzylamine has benzyl as the N-substituent. This colourless liquid that is soluble in water is a popular starter in organic chemistry and is utilized in the manufacturing process of many medications.

Learn more about benzylamine here:

https://brainly.com/question/9654525

#SPJ4

The density of solid is 2730kg/m^3.

The amount of "stuff" in a certain amount of space is measured by its density. The definition of it is the mass per unit volume.

Given:

Total density = 2030kg/m^3

Water content = 25%

Gs= 2.73

Density of water = 1000kg/m^3

To find:

Density of solid = ?

Formula:

Dry density = moist density / 1 + water content

Density of solid = Gs x density of water

Calculations:

Density of solid = 2.73 x 1000

Density of solid = 2730kg/m^3

Dry density = 2030 / (1+0.25)

Dry density = 2030 / 1.25

Dry density = 1624kg/m^3

Result:

The density of solid is 2730kg/m^3 and the dry density of the soil is 1624kg/m^3.

Learn more about Density here:

https://brainly.com/question/6329108

#SPJ4

Answer:

exothermic chemical reaction.

Explanation:

you can feel it

Diagram B represents the plum pudding model of the atom.

Plum pudding model was proposed by Thomson. He knew that atoms are of neutral charge. Therefore, he reasoned that there must be a source of charge within the atom to counterbalance the charge on the electrons. This led Thomson to propose that atoms may well be described as negative particles floating within a soup of diffuse charge.

This model is usually called the pudding model of the atom, because of the actual fact that its description is incredibly just like Christmas pudding, a well-liked English dessert.

However, Thomson’s atomic model did not explain how the electric charge holds on the electrons inside the atom. It also did not explain an atom’s stability.

The theory failed to mention anything about the nucleus of an atom.

It was unable to elucidate the scattering experiment of Rutherford.

Even though Thomson’s atomic model was inaccurate and had some drawbacks, it provided the bottom for several other atomic structure models afterward. it's one in all the muse models that led to significant and revolutionary inventions later.

Therefore, option B is the diagrammatic representation of plum pudding model.

To learn more about the application of atomic models in modern science click below,

https://brainly.com/question/2193084

#SPJ9

Incorrect question .

Corrected question- Write the chemical symbol for three different atomic cations that all have 12 electrons.

The number of protons inside the nucleus always remains constant.

∴Chemical symbol of three different atomic cation that have 12 electrons:

Atomic cation is the ion with positive electric charge on it, it means it should have more protons than electrons.

To learn more about atomic cation refer- https://brainly.com/question/12055269

#SPJ4

Al⁺, Si²⁺ ,P³⁺ are the atomic cations with 12 electrons.

∵The nucleus always contains the same number of protons.

∴Three distinct atomic cations with 12 electrons each have the following chemical symbol:

1. Al⁺

2. Si²⁺

3. P³⁺

An ion or atomic cation with a positive electric charge is thought to have more protons than electrons.

• Aluminum (Al) contains 13 electrons, hence Al+ will have = 13 - 1→ 12 electrons (1 electron will be lost for every additional charge).

• Si2+ will have = 14 - 2→ 12 electrons since silicon (Si) has 14 electrons. (+2 charge signifies electron loss of 2);

• Because phosphorus (P) has 15 electrons, P3+ will have 12 electrons because 15-3. (+3 charge indicates that 3 electrons will be lost.)

Hence, Aluminium, Silicon and phosphorus cations have 12 electrons.

To learn more about atomic cation refer-

brainly.com/question/12055269

#SPJ4

Your question is incorrect. The correct question is -Write the chemical symbols for three different atomic cations that all have 12 electrons.

If 233.76g NaCl in 1l of water makes a solution of 1M, then the same amount in 5l solution will make 1/5M solution.

What is molarity?

The term "molar concentration" is used to define the concentration of a chemical species, specifically a solute, in a solution. It denotes the quantity of a substance per unit volume of solution. Other synonyms for this phrase include quantity, substance concentration, and molarity.

M = n/V

where,  n = no of moles of solute that is solute concentration

V = volume of solution

and, M = molarity of the solution.

If 233.76g of sodium chloride dissolves in 1 litre of water to form a 1 M solution, then the same amount in 5 litres will form a 1/5 M solution.

To learn more about molarity from the given link below,

https://brainly.com/question/24458686

#SPJ4

Compound that would have the highest boiling point is c) CH₃CH₂CH₂CH₂CH₂OH.

Pentan-1-ol (CH₃CH₂CH₂CH₂CH₂OH) is an alcohol with boiling point of 137⁰C.

While boiling, liquid pentan-1-ol is changed into gaseous pentan-1-ol.

Alcohols have higher boiling point than ethers, because it can form hydrogen bonds (see the picture below).

Between molecules of water there are hydrogen bonds, which must be brake so water can evaporate.

Hydrogen bond is an electrostatic attraction between two polar groups in which one group has hydrogen atom (H) and another group has highly electronegative atom such as nitrogen (like in this molecule), oxygen (O) or fluorine (F).

More about alcohol: brainly.com/question/9867663

#SPJ4

1.5 contains two significant figures i.e. 1 and decimal number 1.5 .

Significant figures are the number of digits in a value, often a measurement, that contribute to the degree of accuracy of the value. We start counting significant figures at the first non-zero digit.

There are 3 rules to determine significant figures ,there are as :

1. Non-zero digits are always significant.

2. Any zeroes between two significant figures digits are significant.

3. A final zero in the decimal portion only are significant.

Hence, 1.5 contains two significant figures .

learn more about significant figures here,

https://brainly.com/question/24491627

#SPJ1

The change that can make the model of nitrogen atom more accurate is to show 7 neutrons in the nucleus. The correct option is C.

An atom is a matter unit of matter that defines a chemical element distinctively. An atom is made up of a central nucleus one or more negatively charged electrons.

The nucleus is positively charged and encompasses one or more protons and neutrons, which are relatively heavy particles.

Nitrogen is an atom with seven protons, seven neutrons, and seven electrons. The nucleus is made up of neutrons and protons that are all stuck together in the middle of the atom.

The addition0. of 7 neutrons in the nucleus can improve the accuracy of the nitrogen atom model.

Thus, the correct option is C.

For more details regarding atom, visit:

https://brainly.com/question/1566330

#SPJ1

Your question seems incomplete, the complete question is:

A students drawing of a nitrogen atom is shown. What change would make the model more accurate?

A-move the electrons into the nucleus

B-add 2 more protons

C-show 7 neutrons in the nucleus

D-remove 2 electrons

The molecular equation for the reaction of aqueous copper(II) chloride and aqueous potassium phosphate:

3CuCl₂(aq) + 2K₃PO₄(aq) → 6KCl(aq) + Cu₃(PO₄)₂(s)

CuCl₂ is the salt copper (II) chloride.

K₃PO₄ is the salt potassium phosphate.

KCl is the salt potassium chloride.

Cu₃(PO₄)₂ is the insoluble salt copper(II) phosphate.

Anhydrous copper(II) phosphate is a blue solid salt.

(aq) is an aqueous solution.

(s) is a solid, insoluble in the water

There are same number of atoms of on both side of the balanced chemical reaction: three copper (Cu), six chlorine (Cl), six potassium (K), two phosphorus (P) and eight oxygen (O) atoms.

More about chemical equation: brainly.com/question/6876669

#SPJ4