how many valence electrons is is 4.78 million kg of sulfur please show ur work with dimensional analysis

Answer:

Liquid; melting.

Explanation:

So what is being shown is a phase change diagram. Because we start at an atm of 1.5 (staying steady means that it doesn't drop so we always stay at 1.5 atm) and at a temperature of -150, the original state of matter is a solid. Next, we look at what happens when the temperature goes to 300 degrees, yet still maintaining the 1.5 atm. This means that it now turns into a liquid (based on placement on diagram). This means the matter after the temperature change was a liquid. And going from solid to liquid would be called melting.

Here's an example phase diagram so that you can rely on it in the future problems!

In two moles of NH3, there are 12.04 × 10²³ molecules. Ammonia is a gas that is colorless, extremely unpleasant to breathe, and causes choking.

Concentrations exceeding 5000 ppm typically result in abrupt respiratory arrest, while concentrations between 2500 and 4500 ppm can be lethal in about 30 minutes. Skin injury can be induced by anhydrous ammonia at concentrations higher than 10,000 parts per million.

80% of the ammonium produced by businesses is employed as fertilizer for agriculture. Ammonia is also used to create polymers, explosives, textiles, pesticides, dyes, and other compounds in addition to its various applications.

6.02×10²³ atoms, molecules

one mole NH₃

= 6.02×10²³ molecules

= 2 × (6.02×10²³ )

= 12.04 × 10²³ molecules.

To know more about ammonia visit:

https://brainly.com/question/1432685

#SPJ1

The total weight of the three test samples is weighed by the chemist is 3.240g.

the total weight is 0.70 g + 0.240 g + 2.3 g = 3.240 g. It is the sum of the weight of the three test samples.In chemistry, test samples are small amounts of a substance that are taken from a larger batch and used for testing or analysis. They are typically measured in grams (g) or milligrams (mg). The size of the test sample will depend on the type of analysis being performed and the amount of material available for testing. For example, in qualitative analysis, a small amount of the substance is often enough to identify the presence of a particular element or compound, whereas in quantitative analysis, larger test samples may be needed to obtain accurate measurements of the concentration of a substance.In general, it is important to accurately measure the weight of test samples in order to obtain precise and accurate results from chemical analysis. This is typically done using a balance or scale that is capable of measuring very small weights.

learn more about chemistry here:

https://brainly.com/question/13428382

#SPJ4

If you need to make a na2so4 nitrate solution for an experiment, weigh out 0.6375 g of sodium nitrate.

a method used in a controlled setting to find a previously undiscovered effect or law, validate a theory, or provide an example of an existing law. experimenting, the act of testing

An experiment is a procedure used to verify or refute a theory, as well as gauge the success or viability of something that hasn't been done before. Experiments illuminate cause-and-effect linkages by demonstrating how happens when a specific ingredient is changed.

To know more about experiment visit:

https://brainly.com/question/30055326

#SPJ4

The most likely name of the compound is hexane.

The empirical formula of a hydrocarbon is CH2, which corresponds to a compound made of Carbon and Hydrogen atoms. The molecular weight of the compound is 70, which means that the compound is composed of 6 Carbon atoms and 14 Hydrogen atoms. The hydrocarbon compound with 6 Carbon atoms is hexane. The molecular formula of hexane is C6H14.

Hexane is a hydrocarbon with six carbon atoms in a straight chain, it is a colorless liquid that is widely used as a solvent and in the production of various industrial and consumer products.

It's important to note that the empirical formula gives the simplest whole number ratio of atoms in a compound and the molecular formula gives the actual number of atoms in a compound.

To know more about Hexane click below:

https://brainly.com/question/863881#

#SPJ4

There's some characteristic that can distinguish between a strong and weak electrolyte:

1. in strong electrolyte when in aqueous solution, it totally dissociates into ions while  weak electrolyt, in an aqueous solution, it partially dissociates into ions.

2.In strong electrolyte most free ions are present in the solution. while weak electrolyte both free ions and undissociated molecules can be found in its solution.

3. strong electrolyte concentration of ions in the solution is extremely high.

while in weak electrolyte Ion concentration in the solution is low.

4. Strong electrolyte  has high electrical conductivity while weak electrolyte  has some electrical conductivity.

An electrolyte splits into ions when it is dissolved in a solvent like water (or any other conductive species). Because of this, two or more moles of conductive species always result from the dissolution of one mole of electrolyte. As a result, when an electrolyte is dissolved in a solvent, the colliding characteristics of the electrolytes change significantly.

For instance, the following generic equation can be used to describe variations in freezing point and boiling point:

Tb = Kbm, and Tfz = Kfm.

Tfzeeze stands for freezing point depression and Tb for boiling point elevation. The freezing point depression constant is Kf, and the boiling point elevation constant is Kb. The solution's molarity is given by m. The aforementioned equations are adjusted as follows for electrolytic solutions:

iKbm for Tb and iKfm for Tfz

I stands for the Van't Hoff factor, an ion multiplier. The number of moles of ions provided by an electrolyte is equal to this factor. Therefore, the amount of ions released by an electrolyte during its dissolution in a solvent can be used to calculate the Van't Hoff factor. Van't Hoff factor values for NaCl and CaCl2, respectively, are 2 and 3, respectively.

Learn more about electrolyte at https://brainly.com/question/19340043

#SPJ4

Since there is not much of an energy difference between the 3p and 3d subshells in S, an electron may move easily between them, making sp³d² hybridization conceivable.

The process of two key mono DNA and/or RNA molecules joining together to generate a double-stranded molecule is known as hybridization in the context of genomics. The proper base pairing between the four single-stranded molecule is necessary for the bonding.

D begins from the third orbital as the energy disparity between subshells.

As a result, an electron cannot move from the second to the third orbital plane. They are therefore unable to undergo sp³d² hybridization.

To know more about Hybridization visit:

https://brainly.com/question/28468454

#SPJ4

Answer:

Al(OH)3 + 3HCl ---------> AlCl3 + 3H2O

The reaction for sodium, Na, that corresponds to the first ionization energy is as follows:

Na(g) → Na⁺(g) + e⁻

In many cases, this energy is expressed in kJ/mol.

The following reaction for chloride, Cl, corresponds to the first ionization energy:

Cl(g) + e⁻ →Cl(g)

The energy needed to eject an electron from a gaseous atom is referred to as the ionization energy. Ionization energy, sometimes referred to as ionization potential, is the amount of energy needed to remove an electron from an isolated atom or molecule in physics and chemistry.

Here,

For Sodium, Na, the reaction that corresponds to the first ionization energy is the following one:

Na(g) → Na⁺(g) + e⁻

This energy is frequently expressed in kJ/mol

For Chloride, Cl, the reaction that corresponds to the first ionization energy is the following one:

Cl(g) + e⁻ →Cl(g)

To know more about ionization energy,

https://brainly.com/question/28385102

#SPJ4

For the reaction :2MnO₂   + 4KOH  + O₂ + Cl₂   --->  2KmNO₄   +  2KCl   +  H₂O , the limiting reagent in the reaction is MnO₂.

The reaction is given as :

2MnO₂   + 4KOH  + O₂ + Cl₂   --->  2KmNO₄   +  2KCl   +  H₂O

Mass of the MnO₂ = 100 g

Moles of the MnO₂ = mass / molar mass

                                = 100 / 86.93

                                = 1.15 mol

Moles of the KOH = mass / molar mass

                              = 100 / 56.10

                              = 1.78 mol

Moles of the  O₂ = 100 / 32

                            = 3.12 mol

Moles of the Cl₂ = 100 / 70.90

                            = 1.41 mol

Thus, it is clear that the limiting reagent is MnO₂.

To learn more about limiting reagent here

https://brainly.com/question/22076723

#SPJ4

According to capnography research, EtCO2 is part of the normal flow of carbon dioxide through the respiratory system.

End-tidal carbon dioxide, a parameter used in capnography, quantifies ventilation (EtCO₂). The pressure unit mm Hg (millimeters of mercury) is used to measure EtCO₂ values. No matter the patient's age, gender, race, or size, the normal values fall between 35 and 45 mm Hg, or around 5% CO₂.

When a patient has a high EtCO₂ reading at the beginning of treatment, a drop in that reading signifies improvement. If there is no change or an increase in EtCO₂, it means that respiratory effort is still insufficient to sufficiently remove CO₂ and that additional interventions are required.

To know more about capnography visit:

https://brainly.com/question/28137059

#SPJ4

The Ka for hypochlorous acid is  0.841 x 10^-8 whose pH of 0.10M HOCl is 4.23 is and its pKa for this acid is 8.075.

Given pH of  hypochlorous acid (HOCl) = 4.23

The concentration of [HOCl] = 0.10M

We know that HOCl is dissociated as follows:

HOCl <==> H+ + ClO-

Ka = [H+] [ClO-]/[HOCl]

Let the concentration of [H+] and [ClO-] be x. Then,

Ka = (x)(x) / 0.10

We know that pH = -log([H+])

[H+] = 10^-4.23 = 0.000058M = 0.58 x 10^-4M

Ka = (0.58x10^-4) * (0.58 x 10^-4) / 0.40 = 0.841 x 10^-8

Then pKa = -log(Ka)

pKa = -log(0.841 x 10^-8) = 8.075

Hence the required Ka and pKa of hypochlorous acid are 0.841 x 10^-8 and 8.075 respectively.

To learn more about pKa click here https://brainly.com/question/14906539

#SPJ4

A. The product of the reaction sequence is Na[(CH3)2NH2]Cl, where Na is the counterion. There is no chiral center in the structure, so no configuration needs to be shown.

A reaction sequence is a series of chemical reactions in which one reaction leads to the next. It is a set of chemical reactions that takes place one after another in the same order. Reaction sequences can involve single or multiple reactions, and the reactions can be either in the same container or in separate containers. In a reaction sequence, each reaction is dependent on the product of the previous reaction, which then acts as the reactant for the next reaction.

B. There is no chiral center present in the structure, so no configuration needs to be shown.

To learn more about reaction sequence
https://brainly.com/question/22711879
#SPJ4

The denominator of density determines how quickly a gas diffuses 16.7 seconds.

It will be equal to 36 or 6 if,

7/16 x 6

7/4 x 6

But chlorine has a volume that is double that of oxygen. Chlorine escapes at a rate of

7 x 3 (2/1 x 7/4 x 6) = 21 seconds.

A diffusion is what?

A substance diffuses when it moves from a region with a high concentration to one of lower concentration. When particles in gases and liquids randomly collide and disperse, diffusion takes place. For living things, diffusion is a crucial mechanism because it governs how molecules enter and exit cells.

Definition: A substance's movement (whether it be a solid, liquid).

To know more about diffusion visits :

https://brainly.in/question/6407468

#SPJ1

The denominator of density determines how quickly a gas diffuses 16.7 seconds.

It will be equal to 36 or 6 if,

7/16 x 6

7/4 x 6

But chlorine has a volume that is double that of oxygen. Chlorine escapes at a rate of

7 x 3 (2/1 x 7/4 x 6) = 21 seconds.

A substance diffuses when it moves from a region with a high concentration to one of lower concentration. When particles in gases and liquids randomly collide and disperse, diffusion takes place. For living things, diffusion is a crucial mechanism because it governs how molecules enter and exit cells.

Definition: A substance's movement (whether it be a solid, liquid).

To know more about diffusion visits :

https://brainly.com/question/20843145

#SPJ1

The empirical formula of the compound (chromium oxide) formed when 100 grams of chromium is heated in the presence of excess oxygen is CrO₃

The chemical formula of a compound that gives the proportions (ratios) of the elements present in the compound but not the precise number or arrangement of atoms is known as an empirical formula.

We'll start by figuring out how much oxygen is in the compound. Below is an example of this.

Mass of chromium = 100 grams

Mass of compound  = 192.31 grams

Mass of oxygen =?

Mass of oxygen = (Mass of product) - (Mass of chromium)

Mass of oxygen = 192.31- 100

Mass of oxygen = 92.31 grams

Mass of chromium (Cr) = 100 grams

Mass of oxygen = 32.31 grams

Empirical formula = ?

Divide by their molar mass

Cr = 100/52 = 1.9

O =92.31/16 = 5.7

Divide by the smallest

Cr = 1.9/1.9 = 1

Br = 5.7/1.9 = 3

To know more about empirical formula visit:

https://brainly.com/question/29402093

#SPJ4

After mixing each of the following pairs of solutions, ions remain in the mixture, unreacted:

a. potassium ions and sulphate ions

b. lead ions and sulphide ions

c. ammonium ions and chloride ions

An ion is a positively or negatively charged atom or molecule. The charge of an electron is considered negative by convention, and this charge is equal to and opposite to the charge of a proton, which is considered positive. An ion is a chemical species with a significant positive or negative charge. The term 'ion' can refer to any atom or molecule with a net charge greater than zero. An ion is a positively charged atom or group of atoms. Cations are positively charged ions. Anions are negatively charged ions. Many normal substances exist in the body as ions.

Here,

After mixing each of the following pairs of solutions, ions remain unreacted in solution.

potassium ions and sulfate ions

lead ions and sulfuride ions

ammonium ions and chloride ions

To know more about ions,

https://brainly.com/question/4489490

#SPJ4

Cr(NO) is a non-reactive solution. The most basic solution is NH4Cl. NaI is a weakly acidic solution.

A chemical compound is a substance made of numerous identical molecules joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule composed entirely of one element's atoms is not a compound. a material made up of two or more different elements joined chemically. Compounds include things like water (H2O), which is created from the elements hydrogen and oxygen, and table salt (NaCl), which is created from the elements sodium and chloride. A substance made up of two or more constituents is called a compound. Water, carbon dioxide, and table salt are examples of compounds.

Here,

Cr(NO) is neutral solution. NH₄Cl is basic solution. NaI is acidic solution.

To know more about compound,

brainly.com/question/24002733

#SPJ4

For the following electrochemical cell Co(s)|Co2 (aq.), 0.0155 m)||ag + (aq.), 3.50 m)|ag(s), the net cell equation Co(s) + [tex]Ag^{+}[/tex](aq.) → 2Ag(s) + [tex]Co^{+2}[/tex](aq.).

An electrochemical cell is a structure that can use electrical energy to assist chemical reactions inside of it or create electrical energy from those reactions. These gadgets can change chemical energy into electricity or vice versa.

Electrochemical cells are necessary in modern society, especially for energy storage. Electrochemical cells, including such batteries, can store energy from erratic energy sources like the sun and wind on a large scale.

To know more about electrochemical cells visit :

https://brainly.com/question/23631454

#SPJ4

Period 2 and period 3 elements do not have the same trend in terms of their electronic configurations. Period 2 elements have 2 electron shells and period 3 elements have 3 electron shells.

The elements in each period have one more electron shell than the elements in the previous period. As a result, the elements in each period have a different number of valence electrons, which affects their chemical properties.

As the period increases, the elements in the period become more metallic. The elements of Period 2 are generally non-metals, and the elements of Period 3 are generally metals.

Find out more on period 2 and 3 elements here: https://brainly.com/question/18878801

#SPJ1

Proteins are made up of amino acids that join together to form long chains.

Proteins are the key waged molecules and building blocks in all cells. You can expect of a protein as a string of beads in which each bead is an amino acid. There are 20 amino acids that help form the thousands of dissimilar proteins in your body. DNA is first interpreted into RNA, then RNA is translated into protein.

The contractile parts of muscles are the proteins actin and myosin. When these proteins are tonic by a nerve impulse they slide across each other, producing a shortening of the muscle cell. The building blocks of proteins are smaller organic molecules called amino acids

So we can conclude that Proteins are compound molecules and do most of the work in cells.

Learn more about Proteins here: https://brainly.com/question/884935

#SPJ1

The moles of sulfuric acid will be formed from 58.0 g of so3 in water is found to be 0.724⋅mol.

Sulfur dioxide (SO2) and nitrogen oxides (NOX) that are released into the atmosphere and carried by air currents and wind result in acid rain. Acids made of sulfuric and nitric compounds are produced when the SO2 and NOX react with oxygen, water, and other substances. Before dropping to the ground, they then combine with water and other substances.

Moles of sulfur trioxide=58.0⋅g/80.07⋅g⋅mol−1 = 0.724⋅mol .

Inhaling sulphur trioxide fumes can be harmful and result in burns to the skin and internal organs. Acid rain is a result of sulphur oxides combining with water vapour in the atmosphere to form sulfuric acid.

Learn more about acid rain here:

brainly.com/question/30168623

#SPJ4

The average rate is 7.14*10-5 M/s in units

The instantaneous rate of the reaction at t = 800 s can be determined by taking the derivative of the concentration of the reactant or product = 800 s.t with respect to time at that specific point.

However, we don't have an equation describing the relationship between the concentration and time, so we can't calculate the derivative. Instead, we can approximate the instantaneous rate by using the average reaction rate over a small interval of time that includes t=800s.

Using the average rate between 500 and 1200 is a good approximation of the instantaneous rate at t = 800. The average rate is 7.14*10-5 M/s in units. 

Learn more about average:

https://brainly.com/question/27646993

#SPJ4

At 25 C, a solution has a KNO3 concentration of 32 g per 100.0 g of water. The solution is therefore not saturated.

Explanation: You are well aware that the solubility of potassium nitrate, KNO3, in water varies between 38.0 g at 25 degrees Celsius and 155 g per 100 g at 75 degrees Celsius.

A solution is said to be saturated when it has dissolved all of the solute it can. At a certain temperature, no additional solute can dissolve in a saturated solution. By continuing to dissolve the solute until no more can be done, we can create a saturated solution.

To know more about solution visit:

https://brainly.com/question/7932885

#SPJ4

Entropy is a measure of disorder, so it follows that as molecular randomness rises, entropy will as well.

Entropy is a measurable physical characteristic and a scientific concept that is frequently connected to a state of disorder, randomness, or uncertainty. Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or randomness because work is produced by ordered molecular motion. Ice melting is the ideal illustration of entropy. The individual molecules are arranged and fixed as ice.

Here,

The processes that have no impact on the universe's entropy are as follows:

1. A process that was run infinitesimally gradually until it reached equilibrium and then reversed.

2. A mixture of solid and liquid water with a constant composition, at standard pressure and temperature.

3. a frictionless pendulum swinging back and forth.

The processes that increase the universe's entropy are as follows:

1. A tabletop covered with a bag of green marbles and a bag of red marbles.

2. Above the melting point, ice melts into water.

3. Slowly converting into oxygen and water is hydrogen peroxide.

To know more about Entropy,

https://brainly.com/question/11656041

#SPJ4

Does not Affect S of the Universe .Part A), B) and C) are included .

Entropy is a measurable physical characteristic and a scientific concept that is frequently connected to a state of disorder, randomness, or uncertainty. The quantity of temperature energy produced per unit of warmth in an unit that cannot be put to use in a useful way is measured as entropy. Entropy is a measure of a system's molecular disorder or randomness because work is produced by ordered molecular motion. Ice melting is the ideal illustration of entropy. The individual molecules are arranged and fixed as ice.

Does not Affect S of the Universe

a process with a fixed composition of liquid and solid water at STP that is performed insignificantly slowly at harmony and then reverted to its initial condition (273.15 K and 1 atm)

motion of a frictionless pendulum

Increases S of the Universe

a bag of red marbles and a bag of green marbles dumped together on a table top

above the melting point, ice melts to water.

sublimation of naphthalene

Entropy rises when molecular randomness does as well.

To know more about Entropy visit :

brainly.com/question/11656041

#SPJ4

The complete Question :

Classify each process by its individual effect on the entropy of the universe, S.

Drag the appropriate items to their respective bins: Increases S of the Universe, Does not Affect S of the Universe, Decreases S of the Universe.

A) a process run infinitesimally slowly at equilibrium and reversed to its original state

B) a constant composition mixture of solid and liquid water at STP (273.15 K and 1 atm)

C) motion of a frictionless pendulum

D) a bag of red marbles and a bag of green marbles dumped together on a table top

E) ice melting to water above the melting point

F) sublimation of naphthalene

(mothballs)

A decrease of pH by 3 implies :C) The OH- concentration decreases by a factor of 1000.

pH is a scale used to determine the hydroxide ion (OH–) concentration in a solution. It is equal to the negative log of hydrogen ion (H+) concentration and is also equal to the negative log of hydroxide ion (OH– ) concentration. As the pH of a solution increases by one pH unit,  concentration of OH- increases by ten times.

When the value of pOH is less than 7, then it is considered basic and therefore there are more OH- than H+ in the solution. At pH 7, the substance is at neutral and means that the concentration of H+ and OH- ion is same. If pH < 7, then solution is acidic.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ4

The molar concentration of H3O+ in cola with a pH of 4.240 will be 7.59 M, and the pH of the aqueous solution will be 13.7.

In chemistry, the pH scale is used to define the acidity or basicity of an aqueous solution. Historically, pH stood for "potential of hydrogen." The pH values of acidic solutions are typically lower than those of basic or alkaline solutions.

A. [H₃O⁺] = 2 x 10⁻¹⁴ M

We must determine the pH.

Calculation of pH

pH equals -log [H3O+]

Replacement pH = - log [2 x 10⁻¹⁴]

pH of the result is 13.7

B.

[H₃O⁺] = ?

pH = 3.12

pH is expressed as = - log [H3O+]

Replacement 3.12 = - log [H3O+]

Conclusion [H3O+] = 7.59 M

Learn more about pH

brainly.com/question/29766400

#SPJ4

The average atomic mass of gallium if 60.00% of its atoms have a mass of 68.926 amu and 40.00% have a mass of 70.925 amu is 69.73 amu.

Average atomic mass is the weighted average of the atomic masses of the naturally occurring isotopes of an element.

The average atomic mass of a substance can be calculated by multiplying the percentage abundance of each isotope by its atomic mass.

According to this question, 60.00% of Gallium atom have a mass of 68.926 amu and 40.00% have a mass of 70.925 amu. The average atomic mass can be calculated as follows:

Average atomic mass = (0.60 × 68.926) + (0.40 × 70.925)

Average atomic mass = 41.3556 + 28.37 = 69.73 amu

Therefore, 69.73 amu is the average atomic mass of the substance.

Learn more about average atomic mass at: https://brainly.com/question/13753702

#SPJ1

Iron atoms are changed into iron(iii) ions during the rusting process. By gaining three electrons, iron atoms are oxidized.

 In contrast to neutrons and protons which are found inside the atom's nucleus, electrons are discovered outside the nucleus. Negative electrons are drawn to the positive nucleus because their opposing electric charges attract one another.

Quarks are the building blocks of protons, neutrons, but not electrons. As far as we could tell, quark and electrons are pure particles, not subatomic components.

To know more about electrons visit:

https://brainly.com/question/28977387

#SPJ4

-205.7 kJ The final enthalpy will be:The enthalpy of the second intermediate equation is halved and has its sign changed.

The entropy of reaction (Hrxn) for a chemical reaction is indeed the differential in enthalpy between the products and reactants; Hrxn is measured in kilojoules per mole.

A change inside the enthalpy of the a reaction that takes place at constant pressure is known as the Reaction Heat (also known as the Enthalpy of Reaction).It is a thermal measurement unit that can be used to determine how much energy is released or created per mole during a reaction.

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ4

The position on the potential energy diagram that corresponds to this reaction would be the transition state.

A reaction is a response or an action that is taken in response to a stimulus. Physical, chemical, or psychological reactions are all possible. Physical reactions include movements, such as reflexes, and involve the body’s muscles, nerves, and other tissues. Chemical reactions involve the transformation of matter from one form to another and can be used to create new substances or break down existing ones. Psychological reactions involve emotions, thoughts, and behavior, and are often the result of a person’s response to an event or situation. All reactions involve changes in the environment of the individual or group and can involve both positive and negative responses.

To learn more about reaction
https://brainly.com/question/11231920
#SPJ4