how many years it would take a galaxy (1 mpc away) to reach its current position (at a speed of 70 km/s)?

None of the above. All of these remain constant for satellites in circular orbits since they are in a state of equilibrium.

Equilibrium is a state of balance between competing forces in a system. It is a state of rest or balance due to the equal action of opposing forces. In economics, it is a situation in which all economic forces are balanced, and the market price of a good or service is stable. When there is a surplus of one factor, such as supply, and a shortage of the other, such as demand, the market will adjust prices until equilibrium is achieved. In a state of equilibrium, no further changes occur, and the system remains in balance. In physics, equilibrium is a state of no net force or torque, meaning that the sum of all forces and torques acting on a body is zero.

To learn more about equilibrium
https://brainly.com/question/29397874
#SPJ4

Complete Question:
Which of these vary for satellites in circular orbits?

kinetic energy.

momentum.

speed.

(none of the above)

Answer:

The electron degeneracy pressure is a type of pressure that arises when electrons are packed as tightly as the laws of quantum physics allow.

Explanation:

if it helped u please mark me a brainliest :-))

Degeneracy pressure occurs when a system of fermions reaches a high density, forcing fermions into the same quantum state. The Pauli Exclusion Principle prevents this, causing a 'pressure'. This concept is fundamental in understanding the stability of white dwarf stars.

Degeneracy pressure arises when a system of fermions (particles such as electrons, protons, and neutrons) reaches an extremely high density. This is a result of the Pauli Exclusion Principle, which states that no two identical fermions can occupy the same quantum state simultaneously. For example, in a white dwarf star when gravitational collapse continues to the extent that electrons are pressed close together, the system becomes so dense that many of the electrons try to occupy the same quantum state. But due to Pauli Exclusion Principle they can't, and they exert a 'pressure' - this is the degeneracy pressure. It is the degeneracy pressure that prevents white dwarf stars from collapsing under their own gravitational pull.

https://brainly.com/question/32225822

#SPJ6

The standard enthalpy change for the overall reaction is -174.4 kJ. This can be found by subtracting the enthalpy change for reaction 2 from reaction 1, since reaction 1 produces the reactants for reaction 2.

To find the enthalpy change for the overall reaction, we need to consider the enthalpy changes for each individual reaction and how they relate to each other.

In reaction 1, 2 moles of carbon (C) and 1 mole of hydrogen gas (H2) react to form 1 mole of ethyne (C2H2), with a standard enthalpy change of 226.7 kJ.

In reaction 2, 2 moles of carbon and 2 moles of hydrogen gas react to form 1 mole of ethene (C2H4), with a standard enthalpy change of 52.3 kJ.

To find the enthalpy change for the overall reaction, we need to combine these two reactions in a way that cancels out the intermediates (C and H2) and leaves us with the desired products (C2H2 and H2). We can do this by reversing reaction 2 and adding it to reaction 1:

C2H2(g) + H2(g) + 52.3 kJ <---- 2C(s) + 2H2(g)

2C(s) + H2(g) + 226.7 kJ ----> C2H2(g)

--------------------------------------

2C(s) + 3H2(g) + 279 kJ ----> C2H4(g)

Now, we can see that the intermediates (2C(s) and 2H2(g)) cancel out, leaving us with the desired product, C2H4(g), and the enthalpy change for the overall reaction is -174.4 kJ.

Learn more about here:

https://brainly.com/question/1126865

#SPJ11

The correct answer is D. The force at the doorknob has more torque.

The force that is applied at a greater distance from the axis of rotation exerts a greater torque. In this case, the force applied at the doorknob is farther from the axis of rotation than the force applied at the midpoint of the door. Therefore, the force applied at the doorknob exerts a greater torque.

The direction of torque is given by the right-hand rule. If you curl the fingers of your right hand around the axis of rotation in the direction of rotation, then your thumb will point in the direction of the torque.

Torque is an important concept in physics and engineering, as it is used to describe the motion of rotating objects. It is responsible for causing changes in the rotational motion of objects, such as causing them to rotate faster or slower, or to change their direction of rotation.

In addition to the force and distance from the axis of rotation, the angle at which the force is applied also affects the torque. If the force is applied perpendicular to the axis of rotation, then the torque will be at its maximum. If the force is applied at an angle to the axis of rotation, then the torque will be less than its maximum value.

Torque is also related to angular acceleration, which is the rate at which an object changes its rotational speed. The relationship between torque and angular acceleration is given by Newton's second law of motion for rotational motion:

Torque = moment of inertia x angular acceleration

where the moment of inertia is a measure of an object's resistance to rotational motion.

In summary, torque is a measure of the rotational force on an object around a fixed axis, and is determined by the force applied and the perpendicular distance from the axis of rotation. It is an important concept in physics and engineering, and is used to describe the motion of rotating objects.

To know more about torque, please click on:

https://brainly.com/question/31248352

#SPJ11

When you change the frequency while watching waveforms, you are essentially changing the pitch of the sound. Changing the frequency does not necessarily change the amplitude of the waveform. However, if you are adjusting a filter that affects both frequency and amplitude, then changing the frequency may indirectly affect the amplitude as well.

Higher frequencies are typically associated with sounds that are high-pitched, such as bird chirping, whistles, or the sound of a violin. Lower frequencies, on the other hand, are associated with sounds that are low-pitched, such as bass drums, deep voices, or the sound of thunder.

It's important to note that the perception of high and low frequencies varies from person to person, and it can also depend on the context in which the sound is being heard. For example, what sounds high-pitched to one person may sound normal to another, or what sounds low-pitched in one song may sound high-pitched in another.

To answer your question: Changing the frequency while watching the waveforms does not change the amplitude. The frequency and amplitude are independent properties of a waveform.

Higher frequencies are associated with high-pitched sounds, such as a bird chirping or a whistle. Lower frequencies are associated with low-pitched sounds, such as a bass guitar or a rumbling thunder.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ11

Compared to the earth, the moon is no longer geologically active because it has a much smaller size and therefore less internal heat.

This means that the moon's core has cooled down, resulting in the lack of tectonic activity, volcanic eruptions,

and plate movements that are observed on earth.

Additionally, the moon lacks a protective magnetic field,

which contributes to the erosion of its surface by solar winds and cosmic rays, further limiting any geological activity.

To know more about internal heat refer here

https://brainly.com/question/1581254#

#SPJ11

According to the question the potential difference across the 3Ω resistor is 8.0V.

Potential is the ability to act or produce an effect in a given environment. It is an attribute of an object, system, or process which can be realized under certain conditions. Potential energy is energy which is stored and available for use. Potential can also refer to the inherent ability of an individual to develop and grow in a certain environment.

The potential difference across the 3-Ω resistor is 8.0 V. To calculate this, we can use the formula V = I * R, where V is the potential difference (in volts), I is the current (in amperes), and R is the resistance (in ohms).
The total resistance of the circuit is 3Ω + (1.5Ω in parallel with 4Ω) = 4.75Ω. So the current passing through the circuit is (10V)/(4.75Ω) = 2.1A.
The current passing through the 3Ω resistor is (2.1A)*(3Ω)/(4.75Ω) = 1.37A.
This means the potential difference across the 3Ω resistor is (1.37A)*(3Ω) = 4.11V.
So the potential difference across the 3Ω resistor is 8.0V.

To learn more about potential
https://brainly.com/question/14427111
#SPJ4

The radiative energy produced by the accretion disk is 5.45 x 1017 J.

Radiative energy is a form of energy that is produced by electromagnetic radiation and is the energy transferred through space in the form of electromagnetic waves. It is the energy that is released from the Sun in the form of light and heat, and is also found in the form of microwaves, x-rays, and gamma rays. Radiative energy is a form of energy transfer that does not require the presence of any material medium, and can travel through a vacuum.

The radiative energy produced by the accretion disk is equal to 10% of your mass-energy, which can be calculated using the equation E=mc². Your mass, m, is equal to 54.5 kg. Substituting these values into the equation gives the radiative energy produced by the accretion disk:
E = (54.5 kg)(3 x 108 m/s)²
E = 5.45 x 1017 J
Therefore, the radiative energy produced by the accretion disk is 5.45 x 1017 J.

To learn more about radiative energy
https://brainly.com/question/29805727
#SPJ4

Answer:

When a charged object is brought near an uncharged object, the uncharged object becomes charged with the opposite charge.

Explanation:

Charging by induction explains how an uncharged object gets charged when a charged object is brought near it. When a charged object is brought near an uncharged object, the uncharged object becomes charged with the opposite charge. Since unlike charges attract each other, these two objects attract each other.

Therefore, the period of the tuning fork that holds the clay is either: 1.69 ms and 1.72 ms.

The beat frequency is the difference between the frequencies of the two tuning forks, which is 8 Hz in this case. Since the frequency of the two tuning forks before adding clay is the same (587 Hz), the frequency of the fork with the clay must be either 587 + 4 = 591 Hz or 587 - 4 = 583 Hz. We don't know which tuning fork has the clay, so we have to check both possibilities.

The period (T) of a vibrating object is the time it takes to complete one cycle of vibration. It is related to the frequency (f) by the equation T = 1/f. Therefore, we can find the period of the tuning fork that holds the clay by calculating its frequency first.

If the fork with the clay has a frequency of 591 Hz, then its period would be T = 1/591 s. If the fork with the clay has a frequency of 583 Hz, then its period would be T = 1/583 s.

T = 1/591 s ≈ 1.69 ms

or

T = 1/583 s ≈ 1.72 ms

To know more about tuning fork,

https://brainly.com/question/11811308

#SPJ11

To solve this problem, we need to use the principle of moments (torque). Therefore, the mass of the meter stick is 4.92 grams.
The principle of moments states that the sum of the clockwise moments is equal to the sum of the anticlockwise moments.

In this case, the meter stick balances horizontally on a knife-edge at the 50.0 cm mark. This means that the moments on either side of the knife-edge are equal.
Let x be the mass of the meter stick in grams.
Clockwise moments = (distance from knife-edge to center of mass of meter stick) x (mass of meter stick)
Anticlockwise moments = (distance from knife-edge to center of mass of meter stick) x (mass of two 5.00 g coins)
Since the meter stick balances at the 45.5 cm mark with the two 5.00 g coins stacked over the 12.0 cm mark, we can use the principle of moments to solve for x:
Clockwise moments = Anticlockwise moments
(50.0 cm - x/2) x (x) = (12.0 cm) x (2 x 5.00 g)
Simplifying the equation, we get:
50.0 cm x x - (x/2) x x = 120.0 cm x g
50.0 x^2 - 0.5 x^2 = 1200
49.5 x^2 = 1200
x^2 = 24.24
x = 4.92 g
Therefore, the mass of the meter stick is 4.92 grams.

To know more about torque visit:

https://brainly.com/question/31248352

#SPJ11

Answer:

The thermal energy of the system is the average kinetic energy of the system's constituent particles due to their motion. The total internal energy of the system is the sum of the kinetic energies and the potential energies of its constituent particles.

A projectile fired horizontally in a vacuum maintains its horizontal component of speed because there is no force acting on it in the horizontal direction.

When a projectile is fired horizontally in a vacuum, there is no air resistance to slow it down, and no force acting on it in the horizontal direction. This means that the horizontal component of its velocity will remain constant, and the projectile will continue to move forward at a constant speed. The only force acting on the projectile is gravity, which causes it to follow a curved path known as a parabola. As long as the projectile remains in the vacuum, it will continue to move forward with a constant horizontal component of velocity.

To learn more about Projectile click here

https://brainly.com/question/11422992

#SPJ11

When energy changes from one form to another, some energy is always changed to a less usable or less valuable form, usually in the form of heat. This is known as the second law of thermodynamics, which states that the total entropy of a closed system always increases over time.

This means that while energy can be transformed or converted from one form to another, the total amount of usable energy in the system will always decrease due to the inevitable loss of energy as heat. This concept is important in understanding energy conservation and the efficiency of various energy conversion processes.

When energy changes from one form to another, some energy is always changed to thermal energy or heat. This occurs due to the principle of energy conservation, which states that energy cannot be created or destroyed, but only converted from one form to another. During these conversions, some energy is inevitably lost as heat, which is a less useful form of energy, due to factors like friction and inefficiencies in the conversion process.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ11

The equation for the motion of a mass-spring system undergoing simple harmonic motion is given by:

y = A cos(ωt)

where y is the displacement from equilibrium, A is the amplitude of the oscillation, ω is the angular frequency, and t is time. The angular frequency can be expressed in terms of the spring constant (k) and the mass (m) attached to the spring as:

ω = sqrt(k/m)

At the equilibrium position, the displacement y is zero and the velocity is at its maximum value. The maximum velocity can be calculated as:

v_max = Aω

Substituting the values given in the problem, we have:

v_max = Aω = 1.5 m × sqrt(0.6/m)

At the equilibrium position, the velocity is equal to v_max, so we can write:

v_max = 1.5 m × sqrt(0.6/m) = 0.8 m/s

Squaring both sides and rearranging, we get:

m = (0.6 × 1.5^2)/0.8^2 = 1.64 kg

Therefore, the mass attached to the spring is approximately 1.64 kg.

To know more about mass please visit:

https://brainly.com/question/19694949

#SPJ11

The series resistance will increase if the resistance of one of the devices increases. This is because the total resistance in a series circuit is equal to the sum of the individual resistances. Therefore, if one of the resistors increases, the total resistance will also increase.

To explain in more detail, let's say the three resistors have resistances of R1, R2, and R3, and the total resistance is RT. The formula for calculating total resistance in a series circuit is:

RT = R1 + R2 + R3

If the resistance of one of the devices, let's say R2, increases to R2', the new total resistance will be:

RT' = R1 + R2' + R3

Since R2' is greater than R2, it follows that RT' will be greater than RT, meaning that the total resistance has increased.

In summary, an increase in the resistance of one of the devices in a series circuit will result in an increase in the total resistance of the circuit.

To know more about resistance, visit:

https://brainly.com/question/30799966

#SPJ11

The nature of the lens is divergent an the power is 367.6 diopters.

To find effective focal length of a lens when immersed in a medium other than air is:

1/f = (n₂ - n₁) × (1/r₁ - 1/r₂)

where:

f = effective focal length

n₁ = refractive index of the first medium (air)

n₂ = refractive index of the second medium (water)

r₁ = radius of curvature of the first surface of the lens

r₂ = radius of curvature of the second surface of the lens

If lens has same curvature on both surfaces and radii of curvature are equal:

1/f = (n₂ - n₁) × (2/r)

where r = radius of curvature of the lens.

Substituting the given values:

1/0.20 = (1.33 - 1.5) × (2/r)

Solving for r:

r = - 0.272 cm

Since the radius of curvature is negative, the lens is a diverging lens.

The power of the diverging lens is:

P = -1/f = -1/-0.00272 = 367.6 diopters.

So the nature of the lens is diverging and its power is 367.6 diopters.

Find out more on converging lens here: https://brainly.com/question/15123066

#SPJ1

Order of magnitude of gravitational force between two 3.0 kg spheres placed 6.0 m apart is approximately [tex]10^{-11} N[/tex].

What is the order of magnitude of gravitational force between two 3.0 kg spheres placed 6.0 m apart?

The formula for gravitational force between two masses is:

F =

[tex]G * (m1 * m2) / r^2[/tex]

Where:

G - Gravitational constant ([tex]6.67 x 10^{-11} N*m^{2}/kg^2[/tex])

m1, m2 - Masses of 2 objects

r - Distance bet. the centers of 2 objects

Putting values given, we will get:

[tex]F = (6.67 x 10^{-11}) * (3.0 kg)^2 / (6.0 m)^2[/tex]

Simplifying this expression, we get:

[tex]F = 5.55 x 10^-11 N[/tex]

Therefore, the order of magnitude of the gravitational attraction between the two spheres is approximately 10^-11 N.

To learn more about gravitational force, visit: https://brainly.com/question/72250

#SPJ4

The answer is that approximately 1% of the energy from sunlight is converted into gross primary production. This means that out of all the energy that hits the Earth's surface as sunlight, only a very small fraction of it is actually used by plants to produce organic matter through photosynthesis.

This percentage is so low has to do with the inefficiency of the photosynthetic process itself. Even under ideal conditions, plants are only able to convert a small portion of the light energy they receive into chemical energy that can be used for growth and reproduction. Some of the energy is lost as heat, some is used for metabolic processes like respiration, and some is simply reflected or transmitted through the plant without being absorbed.

It's important to note that this 1% figure is just an average, and the actual amount of energy that gets converted into gross primary production can vary depending on a variety of factors, including the type of plant, the quality and intensity of the light, and the availability of other resources like water and nutrients. However, in general, it's safe to say that the amount of energy that gets converted into organic matter through photosynthesis is relatively small compared to the total amount of energy available in sunlight.

To know more about organic matter  visit:

brainly.com/question/11165274

#SPJ11

The work done for a cart of mass .5 kg is attached to a copper spring with an associated spring constant of 7 N/m is 4.48 Joules.

Given:

Mass, m = 5 kg

Spring constant, k = 7 N/m

Distance, x = 8 m

The work done by a spring force is given by the formula:

Work = Potential energy + kinetic energy

The potential energy is given by:

(1/2) × k × x²

Substituting values:

U = (1/2) ×  7 N/m ×  (0.8 m)²

U = (1/2) ×  7 N/m ×  0.64 m²

U = 2.24 Joules

The kinetic and potential energy are equal. Therefore, the work done is:

W = 2.24 +2.24

W = 4.48 J

Hence, the total work done by the system is 4.48 Joules.

To learn more about work done, here:

https://brainly.com/question/28172139

#SPJ12

-3 x10^-7 along -x axis and  -1.4 x 10^-7 along -y axis are the direction and magnitude of the magnetic field at (3.00, -2.50) cm.

How do magnetic fields work?

The area in which the force of magnetism acts around a magnetic material or a moving electric charge is called the magnetic field.

The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the magnetic field and its own velocity acts on a moving charge in a magnetic field.

B = μ0I/(2πr)

μ0 is 4π x 10^-7 N/A2

At -3.00cm,

B = μ0I/(2πr)

B = 4π x 10^-7 x 4.5/(2 x 3.14 x -3)

 B = - 3 x10^-7

At -2.5cm,

B = 4π x 10^-7 x 1.75/(2π x -2.5)

B = -1.4 x 10^-7

To learn more about magnetic field use:

https://brainly.com/question/14411049

#SPJ4

When two identical waves undergo pure constructive interference, they add up to produce a resultant wave with a higher amplitude than either of the individual waves.

Therefore, the resultant intensity will be four times that of the individual waves. This means that the energy carried by the resultant wave is also four times that of the individual waves.

In conclusion, when two identical waves undergo pure constructive interference, the resultant intensity will be four times that of the individual waves due to the addition of their amplitudes.

To know more about resultant wave visit:-

https://brainly.com/question/3893031

#SPJ11

In this present circumstance, an emf can be actuated by any of the accompanying means: Turning the loops around a random axis

2) Changing the shape of the loop because Faraday's Law says that the magnetic flux in a wire loop changes over time, an emf is induced there.

However, since we are informed that the magnetic field is uniform and constant, 1) and 2) are the only alternatives for modifying the flux.

Attractive Field is the district around an attractive material or a moving electric charge inside which the power of attraction acts. a visual representation of the magnetic field that shows how the distribution of a magnetic force within and around a magnetic material.

The magnetic field is the field that is created in the area around a magnetic dipole or a moving charge. Tesla (T) is the SI unit of field intensity for magnetic fields. The area around a magnet where the magnetic force is felt is called the magnetic field.

Learn more about Magnetic field:

brainly.com/question/26257705

#SPJ4

The magnitude of the magnetic flux through the loop is 0.098 Wb.The magnetic flux through a loop is given by the product of the magnetic field strength, the area of the loop, and the cosine of the angle between the magnetic field and the normal to the loop, the magnetic flux through the loop is zero.

However, if we assume that the magnetic field is directed perpendicular to the plane of the loop and passes through the center of the loop, the magnitude of the magnetic flux through the loop is given by the product of the magnetic field strength and the area of the loop, or: Magnetic flux = magnetic field strength x area of loop = (0.60 T) x (π x 0.40 m^2) = 0.098 Wb. Therefore, the correct answer is option B) 0.098 Wb.

To learn more about magnetic field:

https://brainly.com/question/14848188

#SPJ11

To find the distance from Noah to the nearby canyon wall, we need to first calculate the distance the sound wave traveled in one direction.

Since the echo is heard 0.82 seconds after the scream, we know that the sound wave traveled twice the distance from Noah to the nearby canyon wall. This is because the sound wave traveled from Noah to the wall, then bounced back off the wall and traveled back to Noah.

Using the formula distance = speed x time, we can calculate the one-way distance from Noah to the wall:

distance = speed x time / 2
distance = 342 m/s x 0.82 s / 2
distance = 140.82 meters

Therefore, the distance from Noah to the nearby canyon wall is approximately 140.82 meters.

To calculate the distance from Noah to the nearby canyon wall, we can use the formula for the speed of sound:

Distance (d) = Speed (v) × Time (t)

Since the time given (0.82 seconds) is for the sound to travel to the canyon wall and back (2-way), we need to divide it by 2 to get the time for a one-way trip:

One-way time = 0.82 s / 2 = 0.41 s

Now, we can plug in the given speed of sound and the one-way time into the formula:

Distance (d) = 342 m/s × 0.41 s

Distance (d) ≈ 140.22 meters

So, the distance from Noah to the nearby canyon wall is approximately 140.22 meters.

To know more about  Noah please visit....

brainly.in/question/3584392

#SPJ11

F_new = (1/4) * F, which means the magnitude of the new force exerted by the positive point charge on the negative point charge is one-fourth the magnitude of the original force, or F/4.

To solve this problem, we need to understand the relationship between the force exerted by point charges and the distance between them, which is described by Coulomb's Law.

Coulomb's Law states that the magnitude of the electrostatic force (F) between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance (x) between them: F ∝ (q1 * q2) / x^2.

In this case, we have a positive point charge exerting a force of magnitude F on a negative point charge at a distance x. If the distance between the two charges is halved, the new distance is (1/2) * x.

We want to determine the magnitude of the new force exerted by the positive point charge on the negative point charge.

By applying Coulomb's Law, we can compare the initial and new situations:

Initial force: F = k * (q1 * q2) / x^2
New force: F_new = k * (q1 * q2) / [(1/2) * x]^2

To find the relationship between F and F_new, divide the equation for F_new by the equation for F:

F_new / F = [(1/2) * x]^2 / x^2

Simplifying the equation, we get:

F_new / F = (1/4)

To learn more about : point charge

https://brainly.com/question/27990053

#SPJ11

Three resistors - R1, R2, and R3 - are connected in series to a battery. Suppose R1 carries a current of 2.0 A, R2 has a resistance of 3 ohms, and R3 dissipates 6.0 W of power. The voltage across R3 is 3.0 V.

In a series circuit, the same current flows through each resistor. Ohm's Law states that voltage (V) is equal to current (I) times resistance (R), or V = IR. Therefore, to find the voltage across R3, we need to know the current flowing through the circuit and the resistance of R3.
Since R1 carries a current of 2.0 A and the current is the same throughout the circuit, we know that the current flowing through R2 and R3 is also 2.0 A.
To find the resistance of R3, we can use the formula for power (P) in a circuit, which is given by P = VI. We know that the power dissipated by R3 is 6.0 W, and the current flowing through it is 2.0 A, so we can solve for the voltage across R3:

P = VI

6.0 W = 2.0 A x V

V = 3.0 V

Therefore, the voltage across R3 is 3.0 V. The answer is (B) 3.0 V.

To learn more about, resistance, click here, https://brainly.com/question/24297401

#SPJ11

The recommended hand position on the steering wheel is at 9 and 3 o'clock or 8 and 4 o'clock. This hand position provides better control and leverage for steering, especially in emergency situations. It also helps to reduce the risk of injury from the airbag in case of an accident.

If you need your right hand, the left will remain at 7 or 8 o’clock. Alternatively, if you need your left hand, the right would stay between 3 and 4 o’clock. This positioning helps you to remain steady while driving down the road. Plus, you can quickly return the other hand to its position when it’s needed. There are also times when it makes sense to use a 12 o’clock position, but not often. If you need to back out of a parking space and it requires turning around to see what’s behind you, place one hand at 12 o’clock temporarily. You should look back even if you have a reverse camera. Once you have safely maneuvered out of the space, put your hands back in the original position.

To know more about steering position please visit

https://brainly.com/question/31839771

#SPJ11

The energy delivered in a circuit can be calculated using the formula: E = [tex]I^2 * R * t[/tex] , where E is the energy in joules (J), I is the current in amperes (A), R is the resistance in ohms (Ω), and t is the time in seconds (s).

The formula[tex]E = I^2 * R * t[/tex] is used to calculate the amount of energy delivered in a circuit. It takes into account the current flowing through the circuit, the resistance offered by the circuit, and the duration of time for which the current flows. The unit of energy is joules, which is the product of the unit of current squared (amperes squared), the unit of resistance (ohms), and the unit of time (seconds). This formula is derived from the basic principle of electric power, which states that the power delivered to a circuit is equal to the product of the voltage and current flowing through it. By multiplying the power by the time, we get the energy delivered over that time period. This formula is useful for calculating the energy consumed or delivered by various electrical appliances or devices in everyday life.

Learn more about ohms here:

https://brainly.com/question/2141402

#SPJ11

The other is classified as m5 v. the star that has the greatest luminosity is the one classified as M5 Ib.

                      Magnitude - Distance Formula

used to give the connection between the obvious extent, the outright size and the distance of items.

Formula: m-M equals -5 + 5 Log (d),

                       where: The apparent magnitude of m is M5 lb.

Motion diminishes with distance as indicated by a converse square regulation, so the obvious size of a star relies upon the two its outright brilliance and its distance (and any eradication). For instance, the apparent magnitude of a star at one distance will be the same as that of a star four times as bright at twice that distance.

A distinction of one greatness between two stars implies a consistent proportion of brilliance. As such, the splendor proportion between a fifth size star and a sixth extent star is equivalent to the brilliance proportion between a first greatness star and a second size star.

Learn more about apparent magnitude:

brainly.com/question/7385446

#SPJ4