Answer:
The functionality of a body can be restored with the help of appropriate flexibility and strengthening. Once everything is in place, you can exercise those muscles specifically for balance to put them to the test. Your body may then adjust, improving your general stability as you get better at completing those activities.
Answer:
The stability of an object is increased when the lower the centre of gravity is.
So we should try to lower the centre of gravity.
024 (part 1 of 3) 10.0 points
A 1.0 kg block is pushed 3.0 m at a constant
velocity up a vertical wall by a constant force
applied at an angle of 29.0° with the horizon-
tal, as shown in the figure.
The acceleration of gravity is 9.81 m/s².
1 kg
3 m
29°
Drawing not to scale.
If the coefficient of kinetic friction between
the block and the wall is 0.40, find
a) the work done by the force on the block.
Answer in units of J.
025 (part 2 of 3) 10.0 points
b) the work done by gravity on the block.
Answer in units of J.
026 (part 3 of 3) 10.0 points
c) the magnitude of the normal force between
the block and the wall.
Answer in units of N.
The work done by the applied force is 21.23 J.
The work done by the gravity is 29.4 J.
The magnitude of the normal force between the block and the wall is 9.8 N.
What is the work done on the block?The work done on the block include the following;
by the applied force, W = Fd cosθby the force of gravity, W = Fn cosθ x dby force of friction , W = Ff cosθ x dwhere;
F is the applied forceFn is the normal forceFf is the force of frictiond is the distance in which the block is moveθ is the angle of inclination of the blockThe applied force on the block is calculated as follows;
Fsinθ - μmgsin(90) = ma
at a constant velocity, the acceleration of the block = 0
Fsinθ - μmg = 0
Fsinθ = μmgsinθ
F = μmg/sinθ
F = (0.4 x 1 x 9.8)/sin(29)
F = 8.09 N
The work done by the applied force is calculated as;
W = Fcosθ x d
W = (8.09 x cos29) x 3
W = 21.23 J
The work done by the gravity is calculated as follows;
W = Fn cosθ x d
where;
θ is the angle between the normal force and the block = 0W = mg cosθ x d
W = 1 x 9.8 x cos(0) x 3
W = 29.4 J
The magnitude of the normal force between the block and the wall is calculated as follows;
Fn = mg cosθ
where;
θ is the angle between the normal force and the block = 0Fn = 1 x 9.8 x cos(0)
Fn = 9.8 N
Learn more about work done by gravity here: https://brainly.com/question/15352390
#SPJ1
a 1.5m long dowel (a cylindrical rod) is pivoted about the end so that it is a pendulum of sorts - it can freely swing in a vertical plane. the dowel has a diameter of 2.0 cm, and its density is 3.2 g/cm3. when it is positioned in its swing such that its angle with the vertical is 22.5 degrees, what is the torque on the rod about the pivot due to its weight?
what is the meaning of life like why do we live just to die?...
A net force of 265 n accelerates a bike and rider at 2. 30 m/s2. What is the mass of the bike and rider together?.
A net force of 265 n accelerates a bike and rider at 2. 30 m/s2. The mass of the bike and rider together will be 115.22 Kg
Force = mass * acceleration
mass = Force / acceleration
= 265 / 2.30
= 115.22 Kg
The mass of the bike and rider together will be 115.22 Kg
To learn more about force here :
https://brainly.com/question/7362815
#SPJ4
What are some ways we can observe gravity in action in the natural world?
Answer:
well the force that holds down the sun and the force that when you throw a ball it cases it to come back to you or boomerang or poring a drink or tides or rolling objects
Explanation:
well all of those show the gravity pull sorry if it wasn't helpful
Venus has about the same mass as earth and is about the same distance from the sun. Yet venus does not support life. An important difference between earth and venus is that venus lacks.
An important difference between planet earth and planet venus is that venus lacks an atmosphere.
The two largest planets, Jupiter and Saturn, have nearly the same chemical composition as the Sun, with 75% of their mass made up of hydrogen and 25% of it of helium. Due to the fact that both hydrogen and helium are gases on Earth, Jupiter and Saturn are frequently referred to as gas planets. This name, though, is misleading. The gas inside Jupiter and Saturn is squeezed until the hydrogen turns into a liquid because of their size. Both planets should be referred to as liquid planets since compressed, liquefied hydrogen makes up the majority of their mass. A liquid or gaseous planet's interior is gravitationally pulled toward its heavier constituents by gravity.
To know more about Planet visit :brainly.com/question/15268075
#SPJ4
When an object is in a gravitational field, it has energy in its __________ __________ energy store. What two words complete the sentence?.
When an object is in a gravitational field, then it has energy in its gravitational potential energy store.
Gravitational energy or gravitational potential energy is the potential energy that an object with mass has with respect to another object with mass due to gravity. It is the potential energy associated with the gravitational field that is released (converted into kinetic energy) as objects fall toward each other.
Gravitational energy is the potential energy that is stored in an object based on its distance from the Earth. Potential energy is one of the energies stored in an object or matter. Thus, Gravitational energy is one of the form of potential energy. The Earth, the Sun, the planets, and the stars all exert a considerable amount of gravity.
Learn more about the gravitational field in
https://brainly.com/question/12324569
#SPJ4
6
1 point
How many significant digits are in
34,000
two
five
three
four
Based on the nasa institute for space studies climate model, observed temperature increases are best represented when it includes the influences of?.
Observed temperature increases are best represented when it includes the influences of increases in greenhouse gases.
What are greenhouse gases ?
Greenhouse gases are gases in the atmosphere that affect the earth's energy balance. They cause the so-called greenhouse effect. Carbon dioxide (CO2), methane, and nitrous oxide, the best-known greenhouse gases, occur naturally in the atmosphere at low concentrations. However, since the beginning of the last century, its proportion has increased significantly due to various anthropogenic causes.
Besides these trace gases, which occur only in very low concentrations in the atmosphere, water vapor is probably the most important greenhouse gas. However, its ability to absorb water vapor from the air is directly related to temperature, so it only plays a major role with respect to the natural greenhouse effect. Therefore, water vapor contributes little to man-made climate change.
To learn more about greenhouse gases , click the given link ;
https://brainly.com/question/21106299
#SPJ4
A rock is at the top of a 30 meter tall hill. It has a
mass of 10 kg. How much potential energy does
it have?
Answer:
Explanation:
Explanation
PE = mgh
The mass once stated, cannot be altered. You cannot decide that 1/2 down its fall, it becomes 25 kg. The mass is fixed once it has a value.
g for your intents is a constant.
h is the only thing you can change.
Givens
m = 10 kg
g = 9.81 m/s^2
h = 30 m
Solution
PE = m*g*h Substitute the givens into the equation
PE = 10 * 9.81 * 30
PE = 2943 Joules
Note a Joule is made of Kg m^2/sec^2
A car accidently Roll of a cliff. A it leave the cliff it ha horizontal velocity of 13 m/ it hit the ground 60m from horeline. Calculate the height of the cliff
The height of the cliff is 104.59 m.
Solution:
Time (t) = 4.62 s
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
h = ½gt²
h = ½ × 9.8 × 4.62²
h = 4.9 × 21.3444
h = 104.59 m
Thus, the height of the cliff is 104.59 m
The maximum point of the parabolic trajectory has a completely horizontal component. Since the velocity is only along the horizontal path, we can conclude that the horizontal velocity at the peak of the motion is zero. The initial horizontal velocity can also be determined by measuring the diameter d of the sphere and dividing it by the time t it takes for the sphere to move across the photogate.
Learn more about Horizontal velocity here:- https://brainly.com/question/24681896
#SPJ4
which of the following is not a general characteristic of the four jovian planets in our solar system?
This is not a characteristic of the four Jovian planets in our solar system: That they are higher in average density than the terrestrial planets.
What are the characteristics of Jovian planets?Unlike the terrestrial planets of inner solar system (Mercury, Venus, Earth, and Mars), Jovian planets do not have solid surfaces.
They are also less dense than terrestrial planets and are composed of gases. They have many moons and their mass gives them more gravitational pull. They also have rings.
Characteristics of the Jovian Planet are : They all are gaseous bodies, they have ring systems around them and also they have a large number of natural satellites.
To know more about Jovian planets, refer
https://brainly.com/question/13037269
#SPJ4
a disc of mass m= 0.5kg is rotating at an initial angular velocity of 5 rad/sec and a mass of inertia of 0.02kgm^2. If it changes its angular velocity at a rate of 2 rad/sec^2 find:
1. the disc final angular velocity at 10 second
2. the disc angular displacement of the disc at the end of 10seconds.
3.Calculate the initial rotational kinetic energy of the disc.
4.what is the final rotational kinetic energy of the disc at the end of 10seconds.
5. compute the work done on the disk during the given time.
(show the answers step by step)
The final angular velocity , angular displacement, initial rotational kinetic energy, final rotational kinetic energy and work done on the disk are respectively 25 rad/s, 150 rad, 0.25 Joule, 6.25 Joule, and 6.00 Joule.
Given parameters:
Mass of the disc; m = 0.5 kg.
Initial angular velocity: ω₀ = 5 rad/sec
Mass of inertia; I = 0.02kg.m².
Angular acceleration; α = 2 rad/sec².
1. The disc final angular velocity at 10 second = ω₀ + α t
= 5 + 10×2 rad/s
= 25 rad/s.
2. The disc angular displacement of the disc at the end of 10seconds;
d = ω₀t + 1/2 α t²
= 5×10 +1/2 × 2 × 10² rad
= 150 rad.
3. The initial rotational kinetic energy of the disc = 1/2 I ω₀²
= 1/2 × 0.02× 5² Joule.
= 0.25 Joule.
4. The final rotational kinetic energy of the disc at the end of 10seconds
= 1/2 I ω²
= 1/2 × 0.02 × 25² Joule
= 6.25 Joule.
5. The work done on the disk during the given time = final rotational kinetic energy - initial rotational kinetic energy
= 6.25 Joule - 0.25 Joule
= 6.00 Joule.
Learn more about angular velocity here:
https://brainly.com/question/12446100
#SPJ1
El niño is a weather event that causes great changes in weather worldwide. During an el niño event, the polar jet stream shifts northward. Which change will an el niño event most likely cause?.
El niño affects the pattern of rainfall over months to seasons by redistributing heat and wind across the Pacific. As the atmosphere above the heated water surface warms, moist air rises and forms rain clouds.
Surface waters in the central and eastern Pacific Ocean become significantly warmer than usual during an El niño event. This shift is inextricably linked to the atmosphere and the winds blowing across the vast Pacific. Easterly trade winds (which blow from the Americas to Asia) weaken and can even turn westward. This allows large amounts of warm water to slosh from the western Pacific toward the Americas. It also reduces the upwelling of cooler, nutrient-rich waters from the deep, slowing or reversing ocean currents along the equator and the west coasts of South and Central America.
The air circulation above the tropical Pacific Ocean responds to this massive redistribution of ocean heat. The eastern Pacific's typically strong high-pressure systems weaken, altering the balance of atmospheric pressure across the eastern, central, and western Pacific. While easterly winds are typically dry and consistent, Pacific westerlies tend to arrive in bursts of warmer, moister air.
To learn about the El niño here
https://brainly.com/question/11900955
#SPJ4
you hold a piece of wood in one hand and a piece of iron in the other. both pieces have the same volume, and you hold them fully under water at the same depth. at the moment you let go of them, which one experiences the greater buoyancy force? you hold a piece of wood in one hand and a piece of iron in the other. both pieces have the same volume, and you hold them fully under water at the same depth. at the moment you let go of them, which one experiences the greater buoyancy force? the piece of wood. they experience the same buoyancy force. the piece of iron. more information is needed.
Answer:
same
Explanation:
They both have the same volume....so they both displace an equal amount of water and thus experience the same buoyancy force
the andean giant hummingbird (patagona gigas) has mass 70 gg and flaps its wings 10 times per second while hovering. estimate the amount of work done by such a hummingbird in each wingbeat.
The Andean Hummingbird (Patagona gigas) has a mass of 70 g and flaps its wings 10 times per second while hovering. Possible answers: between 0.7 J/beat and 1.75 J/beat.
To move an object, it must be converted into energy. The transfer of energy can be done in a force way. This amount of energy transferred by the force that moves the object is called work done. Expressing this concept mathematically, the work W is equal to the force f multiplied by the distance d, or W = fd. If the force is applied at an angle θ to the displacement, the work done is W = fd cos θ. Scientifically, work is done only when a certain distance is traveled or a force is applied. If the object to which the force is being applied is not moving, no work is being done.
Learn more about energy here-
https://brainly.com/question/1932868
#SPJ4
A diver runs horizontally off the end of a 3. 0-m-high diving board with an initial speed of 1. 8 m/s.
At time 0.25 s the driver position is at 0.45 m if he drives the vehicle at an initial speed of 1. 8 m/s.
At t = 0.25 s
Considering horizontal motion of diver vehicle :-
Initial speed, u = 1.8 m/s
Acceleration , a = 0 m/s²
Displacement, s = ?
Time, t = 0.25 s
the equation of motion, s= ut + 0.5 at²
Substituting all the above given values
s= ut + 0.5 at²
s = 1.8 x 0.25 + 0.5 x 0 x 0.25²
s = 0.45 m
so, the position of vehicle will be 0.45 m at an initial speed of 1. 8 m/s.
the complete question is:
A diver runs horizontally off the end of a 3.0-m-high diving board with an initial speed of 1.8 m/s. Given that the diver's initial position is xi=0 and yi=3.0m, find her x positions at the time t = 0.25 s.
learn more about Initial speed here
https://brainly.com/question/19348675
#SPJ4
An 80-kg firefighter slides down a brass pole 8. 0 m high in a fire station while exerting a frictional force of 600 n on the pole. He reaches the bottom of the pole in the time of
He reaches the bottom of the pole in the time of 2.6 sec .
What is force ?
Mechanics compels any action intended to maintain, alter, or distort the motion of an object. The concept of force is commonly explained using Isaac Newton's three laws of motion. According to Newton's first principles, an object at rest, or in uniform linear motion, will remain in that state until a force is applied. The second law states that when an external force acts on an object, it will accelerate (change in velocity) in the direction of the force. The magnitude of acceleration is directly proportional to the magnitude of the external force and inversely proportional to the amount of matter in the body. Newton's third law states that when one object exerts a force on another object, the second object exerts the same force on the first object. This principle of action and reaction explains why forces tend to deform objects (that is, change their shape), whether or not they move them. Object deformation can usually be ignored when studying object motion.
To know about the force , click the given link ;
https://brainly.com/question/12785175
#SPJ4
a 23.0-turn solenoid of length 6.40 cm produces a magnetic field of magnitude 2.10 mt at its center. find the current in the solenoid.
A 23.0-turn solenoid of length 6.40 cm produces a magnetic field of magnitude 2.10 m at its center. The current in the solenoid is
B=μ[tex]*i*N/L=2.2[/tex]
so [tex]i=2.2* .062 /(31*u)=4.4*10^{-3}[/tex] / μ
[tex]I=4.4*10^(-3) /[/tex] μ
What is Solenoid?
Magnets that have a wire wrapped around an iron core are known as electromagnets. The creation of a magnetic field around the iron core depends on the presence of electric current. When the electricity is turned off, the magnetic field disappears. The magnet's wire-wrapped core is ferromagnetic or ferrimagnetic by nature. The most frequent material utilized in the core is iron.The amount of power available determines the magnetic field that is created. Power supply is not required for a permanent magnet, and the magnetic field cannot be controlled. Hard drives, relays, motors, loudspeakers, generators, MRI machines, solenoids, and other devices are all made with magnets.However, The solenoid is a particular type of electromagnet, and its function is to produce.
To learn more about Solenoid do follow
https://brainly.com/question/25562052
#SPJ4
(b) The preure of the air in the balloon i returned to 120 kPa. The temperature of the air inide the balloon i 290 K. The balloon i teted again, changing the temperature of the air and keeping the volume of
the balloon contant
The balloon volume is fixed at 0.413793. We can assume that the outside air pressure is constant.
The pressure inside a hot air balloon is affected by temperature. As the molecules heat up they move faster and hit the inner wall of the balloon harder. This increased motion of gas particles increases the force exerted on the area of the balloon increasing the pressure.
Calculation:-
Pressure = 120 kpa
Temperature = 290 K
PV = nRT
V = nRT/P
= 1 × 8.314× 290/120×100
= 0.413793
The frozen balloon contracted because the average kinetic energy of the gas molecules inside the balloon decreased as the temperature decreased. As a result, the molecules move more slowly and collide with the inner wall of the balloon less frequently and weaker, causing the balloon to deflate somewhat. At a constant temperature if the balloon is compressed to half its volume the air pressure inside the balloon doubles.
Learn more about The temperature here:-https://brainly.com/question/24746268
#SPJ4
Disclaimer:- your question is incomplete, please see below for the complete question.
The preure of the air in the balloon i returned to 120 kPa. The temperature of the air inide the balloon i 290 K. The balloon i teted again, changing the temperature of the air and keeping the volume of
the balloon contant at pressure?.
A line that intersects two or more lines in a plane at different points is called a.
A line that intersects two or more lines in a plane at different points is called a transversal line
A transversal line, in geometry, passes through two lines in the same plane at two distinct points. Intersection caused by transversal forms several angles. These are corresponding angles, alternate interior angles, alternate exterior angles, and co-interior angles.
To learn more about transversal line here :
https://brainly.com/question/17432060
#SPJ4
Ancient Egyptians want to drag stone blocks on a sled to build a pyramid the sleds coefficient of kinetic friction is 0.800 if it takes 14,000N of force to move the sled with one block what is its mass
The mass of stone blocks on a sled to build a pyramid is 8960 kg and it needs 14400 N of force to move.
With the aid of the following formula, the maximum amount of friction force that a surface can exert on an item can be quickly determined:
Fnorm = ω *Ffrict
Fnormal = 0.8 * 14000 N
Therefore, F normal = 11200 N
The support force that is applied to an object when it comes into touch with another stable object is known as the normal force. Most of the time, the following formula can be used to easily describe the normal force:
N = mg
Here, N is the normal force we calculated above
Now, substituting the value of force normal , and gravitational acceleration = 9.8 [tex]m/s^{2}[/tex] into the equation
11520 N= m * 9.8
m = 11200/9.8
m = 8960 kg
For more information on frictional force kindly visit to
https://brainly.com/question/14662717
#SPJ1
while spinning down from 500.0 rpm to rest, a solid uniform disk does 5.1 kj of work. if the radius of the disk is 1.2 m, what is its mass?
The spinning down mass , to learn the mass and radius.
What is radius?
The average distance from the planet's physical center to its surface, calculated from a large number of samples, is known as the mean radius of the Earth. Approximately 6,371,000 meters are represented by the value, rearth. This translates to approximately 3,960 statute miles or 6,371 km.
What is mass?
In physics, mass is a numerical representation of inertia, which is a basic characteristic of all matter. The resistance a body of matter offers to a change in its speed or position as a result of the application of a force is what it is in essence.
Let mass of flywheel be m
Initial angular speed of flywheel=500rpm=52.36 rad/s
Mass moment of inertia of flywheel=(1/2)mr^2=0.72m
Initial rotational kimetic energy=(1/2)*0.72m*52.36^2
Work done in coming to rest = 5100J
Therefore,(1/2)*0.72m*52.36^2=5100
Therefore the mass is 5.17 kg.
Learn more about radius from the given link.
https://brainly.com/question/12908707
#SPJ4
referring to your oscilloscope, which controls affect the following? a) the height of the displayed waveform b) the number of cycles displayed c) the starting point of the waveform d) the position of the waveform e) engaging the sweep generator
Referring to the oscilloscope, the height of the displayed waveform controls the effect.
Thus, the correct option is A.
What is the oscilloscope?Аn oscilloscope is а lаborаtory instrument commonly used to displаy аnd аnаlyze the wаveform of electronic signаls. In effect, the device drаws а grаph of the instаntаneous signаl voltаge аs а function of time.
The most common oscilloscope controls аre for аmplitude, frequency, triggering, аnd chаnnels. Once your teаcher hаs helped us аcquire а signаl using the correct chаnnel аnd triggering we will use the аmplitude аnd frequency controls to displаy the chаrаcteristics of the sound being produced. The аmplitude аdjustment of аn oscilloscope controls how tаll а given voltаge will аppeаr on the screen. The purpose of this аdjustment is thаt you cаn see а very lаrge or а very smаll signаl on the sаme screen.
For more information about oscilloscopes refer to the link:
https://brainly.com/question/10740271
#SPJ4
Is this a photo of a spiral galaxy or an elliptical galaxy, and how do you know?.
Elliptical galaxies lack structure and have a rounded ellipsoidal form, which gives them the appearance of a huge spherical or elliptical ball of stars. It is possible to categories elliptical galaxies according on how long and narrow they seem.
Based on how tightly curled the spiral arms appear, spiral and barred spiral galaxies are divided into subclasses. With yellowish bulges in the middle, spiral galaxies look as flat, blue-white discs of stars, gas, and dust. The two categories of these galaxies are regular spirals and barred spirals. In barred spirals, the central bulge is traversed by the starry bar.Galaxies were first categorized by Edwin Hubble into four categories: spirals, barred spirals, ellipticals, and irregulars. He further divided spiral and barred spiral galaxies based on their size.
The question is incomplete, the complete question is:
s this a photo of a spiral galaxy or an elliptical galaxy, and how do you know?.
To know more about galaxies
https://brainly.com/question/9869198
#SPJ4
an object's displacement is 1.02 ft directed at 33.7° ES.
The magnitude of the horizontal component is
and the magnitude of the vertical component is
with solution if you want please
Answer:
The horizontal component is 0.77ft
The vertical component is 0.67ft
Explanation:
I have attached a quick pdf of the work required for this problem. In order to solve this problem first draw a picture.
The direction of the displacement is 33.7 degrees east of south which means that the horizontal component, x, is the displacement times the sin(33.7). Which makes the equation 1.02*sin(33.7)=x. Similarly for the vertical component, except with cosine instead of sine.
A force of 30 n is applied to an object that causes it to accelerate at 20 m/s2. What is the mass of the object?.
Explanation:
F = ma
30 = 20m
m = 30/20
m = 1.5 kg
Now, assume the elevator is at rest. rank the magnitude of the forces.
a. Fi on 3
b. F1 on floor
c. F3 on 2
d. Ffloor on 1
e. F1 on 2
f. F2 on 1
g. F2 on 3
1. largest
2. smallest
The elevator is at rest. rank the of magnitude the forces F1 on floor and F floor on 1 is largest, F1 on 3 is smallest.
What is elevator?Elevator is defined as a vehicle that transports people or cargo vertically using a cable, hydraulic cylinders, or roller tracks. A platform that can be either open or closed, an elevator is used to raise and lower both people and objects to higher and lower floors.
Based on the law of motion If the elevator is accelerating, the weight of the person is larger than real gravity. So a person's weight will increase whether they are going up or down.
Thus, the elevator is at rest. rank the of magnitude the forces F1 on floor and F floor on 1 is largest, F1 on 3 is smallest.
To learn more about elevator, refer to the link below:
https://brainly.com/question/29477960
#SPJ1
after being hit, a golf ball starts out with a velocity of 130 ft/s. if it reaches a maximum height of 180 ft, what is its velocity at that point?
The velocity at the maximum height is zero.
Velocity defines the direction of the motion of the body or the item. speed is generally a scalar quantity. Velocity is essentially a vector quantity. It's far the rate of alternate of distance. it is the rate of change of displacement.
Speed is the time rate at which an object is moving alongside a path, while pace is the price and path of an object's motion. Put another way, speed is a scalar value, whilst velocity is a vector.
In easy phrases, velocity is the speed at which something moves in a specific route. as an instance as the speed of a vehicle journeying north on a highway, or the rate a rocket travels after launching. The scalar means absolutely the cost value of the speed vector is constantly be the velocity of the movement.
Learn more about velocity here:- https://brainly.com/question/25928005
#SPJ4
rank from largest to smallest the values of the magnetic field at the following distances from the axis of the conducting cylinder: ra
The stated assertion states that r> Ra lengths from the conducting cylinder's axis.
The purpose of measuring distanceWe can determine an object's actual size by learning how far it is from us. The area that an object occupies in the sky can be measured. The distance to an object is then necessary to calculate its real size. An thing appears smaller the farther it is away.
Briefing:
The magnetic force is inversely correlated with the conducting cylinder's axis distance.
The strongest magnetic field Rb = 4.95 cm,
Most minimal gravitational flux = r>Ra
Rb = 4.95 cm
r= 5.40 cm
Ra =7.75 cm
r> Ra
To know more about distance visit:
https://brainly.com/question/2841288
#SPJ4
does reversing the current and averaging the value compensate for the effect of earth's magnetic field?
If the current in a current is reversed in a magnetic field, the direction of the magnetic field and the conductor will also be reversed.
What is current reversal?The right-hand rule correctly describes this effect. The current follows the direction the thumb is pointing, but the direction of the magnetic field is dictated by the direction the finger is pointing. If the direction of the current changes, the direction of the magnetic field also changes. When the direction of the current is reversed, the compass needle moves in the opposite direction because the polarity of the magnetic field is reversed. The generated magnetic field is always perpendicular to the direction of the current and parallel to the electromagnets. Therefore, reversing the current will also reverse the direction of the magnetic field.
To know more about current reversal visit:
https://brainly.com/question/11671755
#SPJ4
