How much does a typical water bed weigh? note that 1 cubic foot of water weighs 64.2 pounds and a typical water bed holds 28 cubic feet of water.

If the galvanic cell runs for 1 minute with a current of 0.25 ampere. Then 15 coulombs of charge would have been passed through the cell in that time.

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge.

I =Q/T

As given in the problem If the galvanic cell runs for 1 minute with a current of 0.25 ampere,

Charge = current ×time

             =0.25 ampere×60 seconds

             =15 couloms

Thus, 15 coulombs of charge would have been passed through the cell in that time.

Learn more about an electric charge from here,

brainly.com/question/8163163

#SPJ4

a. x and y component of the vectors are  1,178.2 m/s and -549.4 m/s respectively.

b. x and y component of the vectors are  -1.368 m and -3.76 m respectively.

c. x and y component of the vectors are 2.7 N and 12.72 N respectively.

d. x and y component of the vectors are 17.32 m/s²and -10 m/s²respectively.

The horizontal component of a vector is the   -component of the vector. The vertical component, of a vector is the   -component of the vector.

Vx = 1300 x cos (-25)

Vx = 1,178.2 m/s

Vy = 1300 x sin(-25)

Vy = -549.4 m/s

dx = 4 m cos(250)

dx = -1.368 m

dy = 4 m sin(250)

dy = -3.76 m

fx = 13 N cos(78)

fx = 2.7 N

fy = 13 N sin(78)

fy = 12.72 N

ax = 20 m/s² x cos(330)

ax = 17.32 m/s²

ay = 20 m/s² x sin(330)

ay = -10 m/s²

Learn more about vertical and horizontal component of vectors here: https://brainly.com/question/26446720

#SPJ1

The time taken by the car is 0.018 hours.

Speed is the ratio of the distance covered by a body to the time taken. We know that it can also be defined as the rate at which a body moves from one point to another.

We have the following information from the question;

Speed of the car = 1090 km/hr

Distance covered by the car =  20.0km

Speed = distance/time

time = distance/speed

time = 20.0km/1090 km/hr

time = 0.018 hours

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

The purpose of Archimedes screw is to lift water to a higher point than the source of water.

In an Archimedes screw a helical screw is enclosed in a tube. So water entering the tube is trapped in the first pocket. As the screw turns, the water trapped in the first pocket moves up to the next pocket and a new  scoop of water enters the first pocket. As the screw keeps turning the water gets risen to a higher level than the initial level.

Therefore, the purpose of Archimedes screw is to lift water to a higher point than the source of water.

To know more about Archimedes principle

https://brainly.com/question/787619

#SPJ1

What is it?

The Archimedes Screw allows people to draw water uphill, and this was made over 2,000 years ago! This simple invention had huge implications and it has been used on everything from irrigation to bilge pumps on ships.

How is it used today?

Humans still use this device today for many different reasons. As well as being able to move water uphill, it's also used in the hydroelectric industry where the design is reversed. In other words, water flows downward through the screw, tuning it, and generating electricity.

In addition, the screw pump is used today in modern medicine to maintain steady blood flow within patients who have acute heart failure.

Answer:

b. 19026000gk

a. 5.281

c. 219.2

Explanation:

Answer:

1.32 (3sf)

Explanation:

total distance the sound wave travel= 225 x 2= 450m
450 ÷ 340= 1.32s

Based on the law of conservation of energy the fact that is true is energy can neither be created or destroyed.

The capacity to do work is called energy. The Law of conservation of energy states that energy can neither be created nor be destroyed. Although, it may be transformed from one form to another and the total energy of an isolated system always remains constant. This implies that a system always has the same amount of energy, unless it's added from the outside.

Thus Law of conservation of energy is true for every matter present on earth.

Learn more about Energy Laws here:

https://brainly.com/question/817289

#SPJ9

The carousel that rotates at 0.10 rev/s, takes 125.66 s to go around twice

To solve this uniform circular motion (UCM) problem the formula and the procedure we will use is:

w= (2*π *n)/t

Where:

Information about the problem:

Applying the angular velocity formula and isolating the time, we get:

w= (2*π *n)/t

t = (2*π *n)/w

t = (2 * 3.1416 * 2)rev / 0.10 rev/s

t = 125.66 s

When an object is in uniform circular motion, the angle described by the radius in each unit of time is known as angular velocity. It is measured in units of (rad/s) (revolutions/s).

Learn more about angular velocity at brainly.com/question/20432894

#SPJ4

Motion means movement, the laws of Physics state  there are mainly 4 types of motion, i.e.

Rotary Motion:  It is the type of motion which deals with rotation of body, it is a special type of motion in which the object is on rotation around a fixed axis like, a figure skater rotating on an ice rink.

Oscillatory Motion:It is a repeating motion in which an object continuously repeats in the same motion again and again like a swing.

Linear Motion: It is  a one-dimensional motion on a straight line, like an athlete running on a straight track.

Reciprocating Motions: A repetitive and continuous up and down or back and forth motion like a needle in a sewing machine

There are also different other types of motion as per directions or as per state of motion.

Types of motion as per state

Uniform Motion

Non-Uniform Motion

Types of motion as per direction

One Dimensional Motion

Two Dimensional Motion

Three Dimensional Motion

Alternating current is demonstrated by the limited current that travels through a wire but produces no net charge over time.

In contrast to direct current, which only flows in one direction, alternating current is an electric current that sometimes changes direction and continually fluctuates in amplitude over time.

Unlike direct current (DC), which only travels in one direction and cannot periodically shift, alternating current (AC) is an electric current that occasionally changes direction.

to learn more about alternating current go to -

https://brainly.com/question/10715323

#SPJ4

Answer:

The tortoise won the race by approximately [tex]33\; {\rm s}[/tex].

Explanation:

Note that speed in the question is measured in meters-per-second. Apply unit conversion and ensure that times in this question are also measured in seconds:

[tex]\begin{aligned} &1\; {\text{hour}} + 15\; {\text{minute}} \\ =\; & 1\; {\text{hour}} \times \frac{3600\; {\rm s}}{1\; {\text{hour}}} + 15\; {\text{minute}} \times \frac{60\; {\rm s}}{1\; \text{minute}} \\ =\; & 4500\; {\rm s}\end{aligned}[/tex].

Time required for the tortoise to finish the race:

[tex]\begin{aligned} \text{time} &= \frac{\text{distance}}{\text{speed}} \\ &= \frac{1000\; {\rm m}}{0.20\; {\rm m\cdot s^{-1}}} \\ &= 5000\; {\rm s}\end{aligned}[/tex].

The time required for the hare to finish the race includes:

[tex]\begin{aligned} \frac{800\; {\rm m}}{2.0\; {\rm m\cdot s^{-1}}} + 4500\; {\rm s} + \frac{200\; {\rm m}}{1.5\; {\rm m\cdot s^{-1}}} \approx 5033\; {\rm s} \end{aligned}[/tex].

Therefore, the tortoise wins the race by approximately [tex]5033\; {\rm s} - 5000\; {\rm s} = 33\; {\rm s}[/tex].

24.49g of aluminium can be plated onto the object in 755 minutes at 5.80 A of current.

Electric current is the quantity of electric charge moving across a given area at a certain rate. I designates it. Ampere is the SI unit for current. It is measured with an instrument called an ammeter. The presence of charge carriers results in the charge. Charge carriers often include electrons or entities deficient in electrons. A key characteristic of subatomic particles is charge. Coulomb is the common unit of charge.

We require correlations between charge and moles of substance in order to calculate the mass of plated aluminum. As a result, we compute:

Charge = It

5.80 × 755 × 60 = 262740 C.

Al may be plated at ,

[tex]262740C (\frac{1mole^{-} }{96500C} )[/tex] × [tex](\frac{1 molAl}{3 mole e^{-} } )[/tex] × [tex](\frac{26.98g}{1mol} )[/tex] [tex]=24.49g[/tex]

Learn more about current here;

https://brainly.com/question/13714441

#SPJ4

Food webs are better representations of how energy moves through an ecosystem than food chains because these diagrams can exhibit how a particular trophic group obtains energy from different sources.

Food webs are interconnected complex diagrams showing the sources of energy that a given group use to maintain their homeostatic internal balance by eating these different sources, while food chains represent linear relationships.

In conclusion, food webs are better representations of how energy moves through an ecosystem than food chains because these diagrams can exhibit how a particular trophic group obtains energy from different sources.

Learn more about Food webs here:

https://brainly.com/question/2179

#SPJ1

Answer:

earth and venus

Explanation:

Answer:

d

Explanation:

Which would have a longer vector arrow?

a: A vector representing 100 miles/hour north

b: Avector representing 100 miles/hour east

c: A vector representing 100 miles/hour south

d: They would all be the same length​

was this the full question

For the distance you'll have to make a right triangle and solve for the missing side (x). Since the plane isn't traveling directly in the east direction it wont be exactly the m/s multiplied by one hour.

3. 1 hr = 3600s.

d = Vt = 163.7m/s * 3600s = 589,320m.

The rain showers have continued over a particular area for several days means that a warm front is formed over there due to which slow rainfall will occur over a large area for long period of time. Hence, option A is correct.

In meteorology, a warm front is the leading edge of a warm air mass that advances as a "front," slides over a colder air mass, and replaces the latter by expelling the latter as it passes.

The border between the two air masses is less obvious than it is at the cold front because it is farther away.

When tropical air collides with polar air that is cooler, a warm front is created. Due to the warmer air's reduced density and impending warm front, the atmospheric pressure drops as the temperature rises. As a result of the warm front's longer slope than the cold front's, different kinds of clouds and amounts of precipitation result. Usually, layer clouds like stratus or cirrus can be seen above the warm front.

When a cold front catches up to a warm front and the energy of both fronts combines, it can occasionally cause an occlusion since the warm front moves more slowly than the cold front. A strong depression (low pressure) arises shortly before the warm air is forced upward.

Hence, a warm front must occur where rain showers continued over a particular area for a long period of time.

To get more information about warm front :

https://brainly.com/question/12375861

#SPJ1

This situation shows the power of positive emotion in shaping emotional reactions.

We as people often  enjoy feeling positive emotions when they are said to be enjoyable to experience. Note that Positive emotions is one that help us see new kinds of possibilities, and thus it is one that makes it easier for us to learn new things and boast as well our talents.

As a result, a person can be able to perform better in regards to assignments as well as assessments. People who do regularly experience any form of good emotions are people who have a ability  to be happier, healthier, well intelligent, as well as socially adept.

Therefore, based on the above, This situation shows the power of positive emotion in shaping emotional reactions.

Learn more about  positive emotion from

https://brainly.com/question/27960318
#SPJ1

refractive index = [tex]\frac{speed of light}{ phase \ velocity \ of \ light}[/tex]

                    n= [tex]\frac{C}{V}[/tex]

                    V= 70% of C

                    V = [tex]\frac{70}{100}[/tex] [tex]\times[/tex]C

                    V = 0.7C

                     n = [tex]\frac{C}{0.7C}[/tex]

                     n = [tex]\frac{10}{7}[/tex]

                    n = 1.428

                    n = 1.43

Refractive index is additionally referred to as the refraction index or index of refraction. The speed of light in a medium depends on the properties of the medium. In electromagnetic waves, the speed is dependent on the optical density of the medium. Optical density is the tendency of the iotas in material to restore the ingested electromagnetic energy. The more optically dense material is, the slower the speed of light. One such indicator of the optical density of a medium is the refractive index.

To learn more about the Refractive index, visit;

https://brainly.com/question/12469161

#SPJ4

The ratio of the kinetic energy is 1 : 3 .

We need to know about kinetic energy to solve this problem. Kinetic energy is the energy from a moving object. It can be determined as

KE = 1/2 . m . v²

where KE is kinetic energy, m is mass and v is speed.

From the question above, we know that

v1 = 27 m/s

v2 = 54 m/s

Find initial kinetic energy (0 to 27m/s)

KE1 = 1/2 . m . v1²

KE1 = 1/2 . m . 27²

KE1 = 364.5 m joules

Find final kinetic energy

KE2 = 1/2 . m . v2²

KE2 = 1/2 . m . 54²

KE2 = 1458 m joules

Hence, the energy required to accelerate (27 to 54 m/s) is

ΔKE = KE2 - KE1

ΔKE = 1458m - 364.5m

ΔKE = 1093.5m joules

By comparing these two kinetic energy, hence

KE1 / ΔKE = 364.5m / 1093.5m

KE1 / ΔKE = 1 / 3

Find more on kinetic energy at: https://brainly.com/question/25959744

#SPJ4

By using uniform motion, the time taken to accelerate is 3.72 seconds.

We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

a = 0.6 m/s²

vo = 55 mi/h

vt = 60 mi/h

Convert the velocity to m/s

vo = 55 mi/h

vo = 55 x 1609.34/3600 m/s

vo = 24.59 m/s

vt = 60 mi/h

vt = 60 x 1609.34/3600 m/s

vt = 26.82 m/s

Find the time taken

vt = vo + a . t

26.82 = 24.59 + 0.6t

0.6t = 2.23

t = 3.72 seconds

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

Answer:

Explanation:

which of the following has the smallest particles

The acceleration of the car between 2 and 5 seconds is 0m/[tex]s^{2}[/tex].

How can the velocity time graph be used to determine the acceleration?

Calculating acceleration involves dividing the change in velocity, expressed in meters per second, by the time required for the change, expressed in seconds. The acceleration is measured in m/[tex]s^{2}[/tex].

As we are aware, velocity = distance / time.

And acceleration = velocity / time.

The linear graph shows that the distance travelled at the time interval of 2 seconds is 10 m. Hence the velocity([tex]v_{1}[/tex]) =10/2 = 5m/s.

The graph shows that the distance travelled is 25 m at time interval of 5 seconds. Hence the velocity ([tex]v_{2}[/tex]) =25/5 = 5m/s.

Acceleration between 2 and 5 seconds is now calculated as

([tex]v_{1}[/tex]-[tex]v_{2}[/tex]) / ([tex]t_{2}[/tex]-[tex]t_{1}[/tex]) = (5-5)/(5-2) = 0 m/[tex]s^{2}[/tex]

To know more about the acceleration, visit the given link:

https://brainly.com/question/12734730

#SPJ4

The data link layer of the OSI model is targeted by the threat of layer 2 attacks.

The International Organization for Standardization (IOS) developed the open system's interconnection (OSI) model, a conceptual framework that enables various communication systems to exchange data via agreed-upon protocols. The OSI, or Open Systems Interconnection, offers a standard for various computer systems to be able to communicate with one another.

One could think of the OSI Model as a common language for computer networking. Its foundation is the idea that a communication system may be broken down into seven abstract levels, each one built on top of the previous.

Hence, the threat of a layer 2 assault is directed against the OSI model's data link layer.

To get more information about the OSI model :

https://brainly.com/question/14433133

#SPJ4

Roll both a 10-sided fair die with an ace side and a 12-sided fair die with an ace side.

The chance that one, and only one, of the dice will land ace is 1/6.

Fair dice are those that have an equal chance of falling face-up on the table. When each face of a conventional 6-sided die has the same probability of 1/6, it can be said that the die is "fair."

.Probability is the possibility of rolling one die and getting a finite number (1, 2, 3, 4, 5, and 6). The fundamental principle of probability is to calculate it by dividing the number of outcomes that are possible by the result that you are anticipating. Therefore, a die has six faces or sides, and there are six equivalent likelihoods for each roll. Regardless of which number you select, there is only one result you are hoping for.

P (only one Ace) =[tex](1/10)(11/12)+(9/10)(1/12)[/tex]

[tex]=20/120[/tex]

[tex]=1/6[/tex]

To learn more about fair dice refer the link:
https://brainly.com/question/14527455

#SPJ4

When financial market liquidity abruptly disappears, it is this that causes the majority of financial crises.

When market liquidity runs out as a result of herd behaviour, when everyone starts trading on one side and starting to sell, liquidity black holes happen. In typical markets, buyers and sellers can both be found there at the same time. Markets are oversold, everyone wants to sell, and there is a dry up of liquidity when there are liquidity black holes. Trading financial instruments costs money. Trading financial assets is simple and inexpensive when there is market liquidity. Liquidity gaps result in the collapse of asset values, the failure of financial assets, and the complete loss of public confidence in the financial system.

Banks may be required to raise capital if authorities enforce new regulatory standards in response to a rise in volatility. This will drive all of the banks to sell, so reducing their exposure, and all of the banks will engage in similar trading. Some people will need to adopt a contrarian approach and respond in a different way than the majority of people are doing in order to prevent a liquidity crisis.

to learn more about liquidity black holes go to -

https://brainly.com/question/16578695

#SPJ4

The answer is 0.4 m³, in order to float, the boat must displace its own mass in water.

Since the boat weighs 10,000,000 kg, and water has a density of 1000 kg/m3, the boat must displace

(10,000,000 kg) / (1000 kg/m³)

= 10,000 m³ of water in order to float.

(Or 10⁴ m³, as written above)

Surface tension is the propensity for liquid surfaces that are at rest to condense into the smallest surface area. Razor blades and insects (like water striders), which have a higher density than water, can float on the surface of the water without even partially submerging due to surface tension. Typically, there are two forms of density: absolute density and relative density. The ratio of a substance's density to the density of a reference material is known as its relative density, sometimes referred to as specific gravity.

To learn more about density:

https://brainly.com/question/15164682

#SPJ4

The fluid with a volume of 24 l that weighs 205 N has a mass of: 20.918 kg and a density of: 0.8715 kg/l

To solve this exercise, the formulas and procedures to be applied are:

Where:

Information about the problem:

Applying the weight formula and clearing the mass we get:

W = m * g

m = W/g

m = 205 N/9.80 m/s²

m = 20.918 kg

Applying the density formula, we get:

d = m/v

d = 20.918 kg/ 24 l

d = 0.8715 kg/l

It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.

Learn more about density in: brainly.com/question/1354972

#SPJ4

Answer:Examples of input devices include keyboards, mouse, scanners, cameras, joysticks, and microphones.

pls mark brainliest

Explanation:

The low value for the measure of variation is b) the data set is normal.

To learn more about the Data set, refer

to https://brainly.com/subject/physics

#SPJ4