how much energy is required to heat 40.7 g of water (h2o) from −10∘c to 70∘c?

The strength of an electric field that a 0.010 C negative charge experiences 0.90 mm from a 0.20 C positive charge is 2.22* 10¹⁷ N/C.

Given that,

Value is positive charge = 0.2 C

Distance of positive charge from 0.01 C negative charge is,

x₀ = 0.09 mm = 0.09 * 10⁻³ m

The expression for the strength of electric field that a 0.010 C negative charge experience from positive charge is,

E₀ = (k* Qₐ)/x₀² = (9* 10⁹* 0.2)/(0.09 * 10⁻³)² = 2.22* 10¹⁷ N/C

Thus, the strength of electric field that a 0.010 C negative charge experience form positive charge is 2.22* 10¹⁷ N/C.

To know more about electric field:

https://brainly.com/question/10962979

#SPJ4

Answer:

wind power can be tracked back to sunlight since sunlight is one of the causes of moving air which is wind .

High temperature causes air to expand causing it to spread over a wider area decreasing it's pressure compared to places of lower temperature which causes air to contract causing a concentration of air molecules which increases its pressure . This two processes causes a pressure difference which leads to movement of air (wind) whose energy can be used to generate wind power.

To solve this problem, you can use the equation for the conservation of energy, which states that the initial potential energy of the spring plus the work done by friction is equal to the final kinetic energy of the block.

The initial potential energy of the spring is given by 0.5kx1^2, where k is the force constant of the spring and x1 is the initial compression of the spring.

The work done by friction is equal to the force of friction times the distance over which it acts, which is given by µkmg*x1, where µk is the coefficient of kinetic friction, m is the mass of the block, g is the acceleration due to gravity, and x1 is the distance the block moves before coming to rest.

The final kinetic energy of the block is given by 0.5mv^2, where m is the mass of the block and v is the final velocity of the block.

You can set up the equation as follows:

0.5kx1^2 + µkmgx1 = 0.5m*v^2

Substituting the given values, we have:

0.5400.3^2 + µk29.810.3 = 0.52*v^2

Solving for µk, we find that:

µk = (0.5400.3^2 - 0.52v^2)/(29.810.3)

The maximum extension x2 of the spring is equal to the distance the block travels, so we can substitute x2 for v:

µk = (0.5400.3^2 - 0.52x2^2)/(29.810.3)

Substituting the value of x2, we find that:

µk = (0.5400.3^2 - 0.520.2^2)/(29.810.3)

Simplifying, we find that:

µk = 0.2

Therefore, the answer is 0.2, letter B.

The acceleration of the bookshelf is equal to 1.30 [tex]m/s^{2}[/tex] when student is trying to push.

Acceleration, rate or speed at which speed adjustments with time, in phrases of each velocity and direction. A factor or an item transferring in a instantly line is elevated if it accelerates or slows down. Acceleration (a) is the extrade in speed (Δv) over the extrade in time (Δt), is referred with the aid of using the equation a = Δv/Δt.

This lets in you to degree how rapid speed adjustments in meters in line with 2d squared. Mainly, Uniform acceleration, non-uniform acceleration, and common acceleration are the 3 styles of elevated motions. The time period uniform acceleration refers to a movement in which an item travels in a instantly line with an growth in speed at same durations of time.

Data: Mass of bookshelf = 51.5 kilogram

Net pressure =  67 Newton

To decide the acceleration of the bookshelf, we'd observe Newton's Second Law of Motion:

Newton's Second Law states that the acceleration of an item is at once proportional to the internet pressure appearing at the item even as being inversely proportional to its mass.

Mathematically, Newton's Second Law of Motion is given via way of means of this formula:

a = f/a

Substituting the given parameters into the formula, we have:

a = 67/51.5

Acceleration = 1.30 [tex]m/s^{2}[/tex].

To learn more about acceleration, refer: brainly.com/question/14344386

#SPJ4

Answer:

29 Joules

Explanation:

58N * 0.5m =

58 * 0.5 =

58 * 5/10 =

290/10 = 29 Joules

The right answer is D. Heat is a type of energy that results from molecules moving from warmer kinds of particles to cooler ones.

Computers, vehicles, communications, state-of-the-art medical technology, and many other things are all powered by energy. The demand for dependable and economical energy is especially pressing for emerging countries. It might even save a person's life.

When electrons transfer by one atom to another, energy is produced. Heat and light are other examples of energy. It is also possible to convert one type of energy into another. Chemical energy that has been stored converts to electric energy using a battery.

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

According to the question,

Using Newton`s 2nd law

Force = ∆momentum/time = ∆(mv)/t = (m/t)*∆v

Given m/t = 2.0kg/s

∆v = 12.0m/s (assuming final vel of water = 0)

F = 2.0kg/s x 12.0m/s

F = 24.0N

In physics, a force is a power that can change the motion of an item. A force can purpose an object with mass to alternate its pace. Pressure also can be described intuitively as a push or a pull.

A pressure is a push or a pull and it affects our each day lives because without force, people might not be capable of open and near stuff or lift up our arms or legs.

Learn more about Force here:- https://brainly.com/question/12785175

#SPJ4

556 nm is the wavelength of radiation that has a frequency of 5.39 × 10⁻¹⁴ s⁻¹.

The energy that emanates from a source and moves through space at the speed of light is referred to as radiation. This energy has wave-like qualities and is accompanied by an electric field and a magnetic field.

Examples include solar heat or light, microwaves from an oven, X-rays from an X-ray tube, and gamma rays from radioactive materials. Atoms can be ionized, or removed from their electrons, by ionizing radiation.

Given that:

frequency (f) = 5.39 × 10⁻¹⁴ s⁻¹

Velocity of light (c) = 2.9979 × 10⁸ m/s

As we know,

   λ = c/f

or, λ =(2.9979 × 10⁸ m/s)/(5.39 × 10⁻¹⁴ s⁻¹)

or, λ = 5.56 × 10⁻⁷m

or, λ = 556 nm

Thus, the wavelength = 5.56 × 10⁻⁷m or 556 nm.

To know more about radiation refer to:

https://brainly.com/question/893656

#SPJ1

Neuroglia: Nervous system composed of two types of cells. A cell that generates and propagates action potential is called neuron and other types of cells that protect and nourishes the neurons called neuroglia. In the CNS there are four types of neuroglia cells.

Astrocytes: Look like star and found in more number. It is the largest glial cells in th CNS and it give strength and support to the neurons

Oligodendrocytes: It is smaller but look like astrocytes and it is responsible for the formation of myeline sheath. Axons that are covered with myeline sheath is called myelinated axon

Microglia: Small cells with number of spine like projections. Its function is phaogocytosis, engulf the bacteria

Ependymal cells: Epithelial cells with villi and cilia and it for blood cerebrospinal fluid barrier.

To know more about neuroglia, visit:

https://brainly.com/question/12969510

#SPJ4

The distance -time graph of object D shows a linear relationship. Thus it moves with a constant speed. Whereas, object C shows a non-linear relation of distance and time thus, it moves with a changing speed.

Velocity is a physical quantity that measures the distance covered per unit time. Velocity is a vector quantity and is having both magnitude and direction.

Velocity is the ratio of distance to the time. Thus, if the change in distance is linear with the change in time, there will be no change in velocity and the object is said to be moving with constant velocity.

If the distance and time are non-linear thus, thus, change in distance is not coinciding with change in time, then the velocity changes each time.

Therefore, object C has a changing speed and object D has a constant speed.

To find more on velocity, refer here:

https://brainly.com/question/18084516

#SPJ1

Electrical inspector authority enforces the requirements set by the NEC.

The NEC specifies the minimum requirements for secure electrical installations.

The letters "UL" signify an electrical product satisfies the safety requirements of Underwriters Laboratories

Section 110.3 (B) Installation and Use of OSHA and NEC 1999. Equipment that is listed or labelled must be installed and used in accordance with any guidelines mentioned in the listing or labelling.

the word "shall" appears in a NEC reference, it means that it (must)(may) be done.

"The goal of this Code is the practical safeguarding of persons and property from hazards deriving from the usage of electricity," the NEC reads in 90.1(A). *

A collection of guidelines for the secure installation of electrical wiring in the US called the National Electrical Code (NEC) is revised on a regular basis. The NEC has been modified three times since it was first published in 1897.

In order to avoid fires and other electrical catastrophes, the NEC offers recommendations for electrical installation. For installations to be secure, legitimate, and compliant, electricians and contractors must be knowledgeable of the NEC when applicable. The National Fire Protection Organization, a private commercial association, is responsible for maintaining the codes.

The National Electrical Code (NEC) is a national designation, but it is not a federal statute. Local government either adopts NEC standards or writes and enforces its own electrical code in place of this.

To learn more about the NEC Please visit the below link.

https://brainly.com/question/14507799

#SPJ4

The distance to the object creating the echo is 2,454.6 meters.

Assuming the submarine is in saltwater, the speed of sound in seawater is approximately 1,484 meters per second.

The distance to the object creating the echo can be calculated by multiplying the speed of sound by the time it took for the echo to return to the submarine:

Distance = Speed x Time

Distance = 1,484 m/s x 1.65 s

Distance = 2,454.6 meters

Therefore, the distance to the object creating the echo is 2,454.6 meters.

For more questions like Distance click the link below:

https://brainly.com/question/14090821

#SPJ4

There is a 230 radian per second angular velocity.

40.25 m/s is the linear speed.

Given that the wheel has a 0.35 m diameter.

as a result, radius D/2

Because one revolution equals one radian.

Thus, an is equal to the product of the velocity change and the time change. a = (w2w1)/(t2t1) a = (w 2w1)/(t2t1).

230 radians per second are hence the angular velocity.

a=v^{2} \r\s(40.25)/0.175\s9257.5

In uniform circular motion, the angular velocity (w), which is a vector quantity, is determined by dividing the angular displacement (), another vector number, by the change in time (t). The arc length traveled (S) divided by the shift in time (t) is the definition of speed.

To know more about angular velocity visit :-

https://brainly.com/question/12446100

#SPJ4

The value of force is 211N.  Thus, the cylinder undergoes through 6 rotations with a force is 211N

A cylinder of mass 5 kg and radius 50cm is rotating at angular speed of 5 rad/sec.

To find the force that must be applied tangentially to the cylinder to bring it to rest in 6 revolutions

As per the given criteria

Rotation if the wheel =  5 rad/ sec

Now, total rev = 6

We know

0 = (10/6) ² - 2 lamda × 6

= 100/36=12 lamba

Lamda= 33.33 rev/sec

Lamda = 2π×33.33 rad/sec²

Now the moment of inertia

I=1/2mr²

=1/2 (0.5) ²× 5

=0.625 kgm²

Since the force F, now torque

F=F.r=0.62 F

Now, torque = I × lamda

= 0.625×33.33×2π

Or 0.62 F= 130.82

F= 211 N  

To know more about force, click on https://brainly.com/question/12785175

#SPJ4

That amounts battery to 220 volts divided by 6.8 times 10 and three less meters between them. That is 6.8 millimeters electric 3.2 times 10 to the four Newtons per Coulomb gives us 32,352 Newtons per Coulomb.

A battery is a device that converts chemical energy into electrical energy by storing it. During chemical reactions in batteries, electrons flow from one material (electrode) to another through an external circuit. The movement of electrons results in an effective electric current.

Electric field due to battery = potential/separation = 220v / 6.8mm = 220v / 0.0068m = 32,352 volts per meter, according to the question.

If there is a battery, two parallel plates spaced 6.8 mm apart will create an electric field.

learn more about battery here:

https://brainly.com/question/5059264

#SPJ4

Answer:-A metal ball is made up of atoms having minimum interatomic distance, so when we heat the metal its atoms actually vibrate about their mean position and thus colliding with neighboring atoms and making them to vibrate, due to this continuation process metals size increases or metal expands on heating.

When heat is added to a substance, the molecules and atoms vibrate faster. As atoms vibrate faster, the space between atoms increases. The motion and spacing of the particles determines the state of matter of the substance. The end result of increased molecular motion is that the object expands and takes up more space                                                                         “Steel will expand from 0.06 percent to 0.07 percent in length for each 100oF rise in temperature. The expansion rate increases as the temperature rises. Heated to 1,000oF, a steel member will expand 9½ inches over 100 feet of length When a metal ring is heated both inner and outer radii increase. This can be understood better by visualizing that the ring in reality is a rod bent into a circle. That rod will expand upon heating. The same bar bent into a ring thus also expands.

Answer: option (c)

Explanation:

Product development is also known as new product operation.

The main ideal is to satisfy the consumer demand.

There are some stages of product development process. They're idea generation, webbing, conception development and testing, request strategy, developing the new product, request testing, request commercialization.

The process of developing a product is managed by product inventor.

Product development can be done in two ways, the new product is introduced or the being products can be bettered according to the client satisfaction.

To know more about

https://brainly.com/question/28013469

0.133 m/sec speed is the length of her shadow on the building decreasing when she is 2m from the building

The quantity of anything that happens or changes in a unit of time is referred to as its rate. You can determine an object's speed if you know how far it moves in a specific length of time. The distance an object travels in a given amount of time is its speed.

Let, x be the distance of the women from the spotlight.

s be the length of the woman on wall / building

these two variables changes when time changes.

Now, consider a triangle,

tan θ = 2/x

tan θ = s/12

As the θ is same, so

or, 2/x = s/12

or, sx = 24

or, s = 24/x .......... (i)

Differentiating w.r.t "t"

or, ds/dt = -24/x² dx/dt .......... (ii)

we want rate of change of length of shadow w.r.t time.

or, 12-x = 4

or, x = 8m

we know, dx/dt = (0.8) m/sec

Substitute this in equation (ii)

ds/dt = [(-24) /(12)²] × (0.8)

ds/dt = - 0.133 m/sec

At rate  - 0.133 m/sec, the length of shadow of women on the building decreasing when she is 2 m from the building.

To know more about speed refer to:

https://brainly.com/question/13943409

#SPJ1

Yes, all electromagnetic waves have polarization as a characteristic. The primary difference in wave qualities involved in polarization of sound waves is amplitude.

Amplitude, The amplitude of the wave is the largest deviation of the wave from the mean position. It is the maximum height between the Center line and the Peak or Valley. There are waves in plane polarized light, and they all vibrate in the same direction. As the wave travels, the electric of a vector in circular polarization rotates about the direction of propagation. Reflection or travelling through filters, like particular crystals, can both cause light to become polarized.

Learn more about polarization here

https://brainly.com/question/29217577

#SPJ4

The springs compress by an extra 12% when driven through the bottom of a circular dip compared to being driven on a flat road.

On a flat road, the springs just support the car's weight.

The weight of the car = force on the springs

And from Hooke's law, F = kx

On a flat road,

k x = mg

x(flat) = 1500 × 9.8/k = 12740/k

Through the bottom of the circular dip, the springs not only balance the weight of the car, they also balance the force that keeps it in circular motion.

kx = (mv²/r) + mg

kx = (1300 × 27²/600) + (1500×9.8) = 14319.5N

x(circular dip) = 14319.5/k

If the value of the springs' spring-constant is available, we'd get straight values for This, but in their absence,

x(circular dip)/x(flat road) = 14319.5/12740 = 1.12

The springs compress by an extra 12% when driven through the bottom of a circular dip compared to being driven on a flat road.

To know more about spring, refer: https://brainly.com/question/18672611

#SPJ4

Answer:

brokies+99+00+00=00

Explanation:

The direct answer to your question is that electric engines can be more than 80% efficient and even up to 90% efficient while combustion engines are 30 to 45% efficient.

Electric motors make vehicles substantially more efficient than internal combustion engines. Electric motors convert over 85 percent of electrical energy into mechanical energy, or motion, compared to less than 30 to 40 percent for a gas combustion engine.

These efficiencies are even lower after considering losses as heat in the drivetrain, which is the collection of components that translate the power created in an electric motor or combustion engine.

• Motor efficiency: 85..90%

• Battery load efficiency: 80..90 %

• Battery discharge efficiency: 80..90 %

• Power generation efficiency at power: 30..40 %

• Transfer efficiency from the powerplant to the reloading station: 90..95 %

• Energy conversion efficiency AC to DC: 90..95 %

To know more about combustion engines, click the below link

https://brainly.com/question/2836941?referrer=searchResults

#SPJ4

Answer:

b

Explanation:

28.8" (and any words after it) was ignored because we have restricted queries to 32 words.

The magnitude of the circuit is 2.5*10^-2. Since the circuit's right edge in the illustration extends into a 50 mt uniform magnetic field, Rightward is the direction of the magnetic force.

According to the left hand rule, the thumb of the left hand points in the direction of force when the middle finger and index finger point in the direction of current and magnetic field, respectively. The magnetic field and the downward direction are indicated by the way the current in this circuit flows, which is from top to bottom. The thumb points to the right if the index finger points into the page and the middle finger points downward. Thus, the direction of the magnetic force is towards right.

F = (5.0)(10)(50mT)(10^-3/1)(sin90)

F = 2.5*10^-2N

Learn more about magnetic field here

https://brainly.com/question/23096032

#SPJ4

The complete question is -

The Right Edge Of The Circuit In The Figure Extends Into A 50 MT Uniform Magnetic Field. What Are The Magnitude of the circuit.

Answer:

13=c

14=a

other question=d

Sphere Y will have a negative and Z have a positive sign. The sign of charge q2 will be negative.

When the spheres are separated and the balloon is removed, the two spheres show an electrical charge. The left sphere ends with a positive charge. The sphere on the right ends with a negative charge. When two conductive balls touch together.

It is as if they become one excellent conductor and the combined charge of the two spheres spreads over the surfaces of the contacting spheres. If you release the spheres again, each will still have half the original total charge. The charge is then spread evenly over the surface of the sphere.

Learn more about A uniform electric field here:- https://brainly.com/question/15331423

#SPJ4

A metal bar magnet has a magnetic field in the region of space around it. The magnetic field is due to an electric current that runs along the length of the magnet.

The lines of magnetic field from a bar magnet form closed lines. By convention, the field direction is taken to be outward from the North pole and in to the South pole of the magnet. Permanent magnets can be made from ferromagnetic materials.

This region is called the magnetic field. If an iron object is near a magnet, but is not within the magnetic field, the object will not be attracted to the magnet. When the object enters the magnetic field, the force of the magnet acts, and the object is attracted.

Inside a bar magnet, since magnetic field are continous, they point from the south pole to the north pole as the magnetic enters from south pole from the outside and emerge from the north pole.

Learn more about bar magnet  here:- https://brainly.com/question/16979849

#SPJ4

The distance for α Centauri in light-years is 4.35

Proxima Centauri is the closest star to the Sun and is part of the Alpha Centauri star system, located 4.24 light-years away from Earth in the constellation Centaurus. Alpha Centauri A and Alpha Centauri B are the primary components of the Alpha Centauri star system, located 4.37 light-years away from Earth. Alpha Centauri A is slightly brighter than the Sun, while Alpha Centauri B is slightly dimmer.

The parallax angle of α Centauri is 0.7420".To calculate the distance in parsecs and light-years, we need to use the formula:

Distance (in parsecs) = 1 / parallax angle (in arcseconds)

Therefore, the distance for α Centauri in parsecs is:

Distance (in parsecs) = 1 / 0.7420" = 1.34 parsecs

To calculate the distance in light-years, we need to use the formula:

Distance (in light-years) = Distance (in parsecs) × 3.26

Therefore, the distance for α Centauri in light-years is:

Distance (in light-years) = 1.34 parsecs × 3.26 = 4.35 light-years

For more questions like Alpha Centauri click the link below:

https://brainly.com/question/12774519

#SPJ4

Answer:

1

Explanation:

Answer:

The angle between the incoming light

and the normal

The movement and charge of particles causes them to form magnetic fields.

Moving electric charges generate magnetic fields. Everything is constructed of atoms, and each atom has an orbiting nucleus that is composed of protons and neutrons. A weak magnetic field is produced around each atom because the orbiting electrons are tiny moving charges.

The movement of electric charges is what generates magnetism. Atoms are little building blocks that make up all substances. Each atom contains electrons, which are little particles with electric charges. The electrons around the nucleus, or core, of an atom spin like tops.

To know more about magnetic fields visit:-

https://brainly.com/question/14848188

#SPJ4