Johnny spent a total of 108 units of currency.
By adding all the values, we get a sum of 108. Therefore, Johnny spent a total of 108 units of currency.
To find the total amount of money Johnny spent, we add up the individual amounts: 25 + 27 + 28 + 28.
25 + 27 + 28 + 28 = 108
Therefore, Johnny spent a total of 108 units of currency. Certainly! Let's break down the calculation in more detail.
Johnny spent the following amounts of money: 25, 27, 28, and 28. To find the total amount spent, we add these amounts together.
25 + 27 + 28 + 28 = 108
By adding all the values, we get a sum of 108. Therefore, Johnny spent a total of 108 units of currency.
This means that if you were to add up the individual amounts Johnny spent, the result would be 108.
learn more about currency here:
https://brainly.com/question/30240732
#SPJ11
You would like to develop a variable control chart with
three-sigma control limits. If your 10 samples each contain 20
observations, what value of D4 should you use for your R-
Chart?
To develop a variable control chart with three-sigma control limits for 10 samples, each containing 20 observations, the value of D4 that should be used for the R-Chart is approximately 2.282.
The value of D4 is a constant used in the calculation of control limits for the R-Chart, which monitors the variability or range within each sample. The control limits for the R-Chart are typically set at three times the average range (R-bar) of the samples.
The value of D4 depends on the sample size and is found in statistical tables or can be calculated using mathematical formulas. For a sample size of 10, the value of D4 is approximately 2.282. This value ensures that the control limits are set at three times the average range, providing an appropriate measure of variability and indicating when a process is out of control.
By using the value of D4 = 2.282 in the R-Chart calculation, you can establish three-sigma control limits that effectively monitor the variability in the process and help identify any unusual or out-of-control variation.
Learn more about variable here:
https://brainly.com/question/29583350
#SPJ11
Suppose f(x)=−8x2+2. Evaluate the following limit.
limh→0 f(−1+h)−f(−1) / h =
Note: Input DNE, infinity, -infinity for does not exist, [infinity], and −[infinity], respectively.
The limit of the given expression can be evaluated by substituting the values into the function and simplifying. The result will be a finite number.
To evaluate the limit, we substitute the values into the expression:
limh→0 f(-1+h) - f(-1) / h
Substituting -1+h into the function f(x), we get:
f(-1+h) = -8(-1+h)^2 + 2
Expanding and simplifying:
f(-1+h) = -8(1 - 2h + h^2) + 2
= -8 + 16h - 8h^2 + 2
= -8h^2 + 16h - 6
Substituting -1 into the function f(x):
f(-1) = -8(-1)^2 + 2
= -8 + 2
= -6
Now, we can rewrite the limit expression as:
limh→0 (-8h^2 + 16h - 6 - (-6)) / h
Simplifying further:
limh→0 (-8h^2 + 16h) / h
= -8h + 16
Finally, taking the limit as h approaches 0, we have:
limh→0 (-8h + 16) = 16
Therefore, the limit of the given expression is 16
Learn more about function here:
https://brainly.com/question/30721594
#SPJ11
Find the third derivative of the given function. f(x)=2x5−2x4+5x2−5x+5 f′′′(x)=___
Therefore, the third derivative of f(x) is [tex]f'''(x) = 120x^2 - 48x.[/tex]
To find the third derivative of the function [tex]f(x) = 2x^5 - 2x^4 + 5x^2 - 5x + 5,[/tex]we need to take the derivative of the second derivative.
First, let's find the first derivative:
[tex]f'(x) = d/dx (2x^5 - 2x^4 + 5x^2 - 5x + 5)[/tex]
[tex]= 10x^4 - 8x^3 + 10x - 5[/tex]
Next, let's find the second derivative:
[tex]f''(x) = d/dx (10x^4 - 8x^3 + 10x - 5)\\= 40x^3 - 24x^2 + 10[/tex]
Finally, let's find the third derivative:
[tex]f'''(x) = d/dx (40x^3 - 24x^2 + 10)\\= 120x^2 - 48x[/tex]
To know more about derivative,
https://brainly.com/question/32597024
#SPJ11
a) Draw a schematic of a heterojunction LED and explain its operation. [6 marks] 'b) The bandgap, \( E_{g} \), of a ternary \( A l_{x} G a_{1-x} A \) s alloys follows the empirical expression, \( E_{g
a) A heterojunction LED consists of different semiconductor layers with varying bandgaps. When a forward bias is applied, electrons and holes recombine at the junction, emitting photons and producing light. b) The bandgap of a ternary AlxGa1-xAs alloy can be described by the empirical expression: Eg = Eg0 - α/(x(1-x)).
a) A schematic of a heterojunction LED:
_______________ ________________
| | | |
n-AlGaAs p-GaAs n-GaAs p-AlGaAs
| | | |
_________ _________ ___________
| | | | | |
| | | | | |
|_________| |_________| |___________|
The heterojunction LED consists of different semiconductor materials with varying bandgaps. In this schematic, the LED is made up of n-type AlGaAs and p-type GaAs layers, separated by n-type and p-type GaAs layers.
The operation of a heterojunction LED involves the injection and recombination of charge carriers at the junction between the different materials. When a forward bias voltage is applied across the device, electrons from the n-type AlGaAs layer and holes from the p-type GaAs layer are injected into the junction region. Due to the difference in bandgaps, the injected electrons and holes have different energy levels.
As the electrons and holes recombine in the junction region, they release energy in the form of photons. The energy of the emitted photons corresponds to the difference in bandgaps between the materials. This allows the LED to emit light with a specific wavelength.
b) The bandgap, \(E_{g}\), of a ternary AlxGa1-xAs alloy can be described by the empirical expression:
[tex]\[E_{g} = E_{g0} - \frac{\alpha}{x(1-x)}\][/tex]
where \(E_{g0}\) is the bandgap of the binary GaAs compound, \(\alpha\) is a material-specific constant, and \(x\) is the composition parameter that represents the fraction of Al in the alloy.
This expression accounts for the variation in bandgap energy due to the mixing of Al and Ga atoms in the ternary alloy. As the composition parameter \(x\) changes, the bandgap of the AlxGa1-xAs alloy shifts accordingly.
The expression also shows that there is an inverse relationship between the bandgap and the composition parameter \(x\). As \(x\) increases or decreases, the bandgap decreases. This means that by adjusting the composition of the alloy, the bandgap of AlxGa1-xAs can be tailored to specific energy levels, allowing for precise control over the emitted light wavelength in optoelectronic devices like LEDs.
To learn more about empirical expression, click here: brainly.com/question/15319830
#SPJ11
a) Find the first four nonzero terms of the Taylor series for the given function centered at a.
b) Write the power series using summation notation.
f(x)=e^x , a=ln(10)
a) The first four nonzero terms of the Taylor series for [tex]f(x) = e^x[/tex]centered at a = ln(10) are:
10, 10(x - ln(10)), [tex]\dfrac{5(x - ln(10))^2}{2}[/tex], [tex]\dfrac{(x - ln(10))^3}{3!}[/tex]
b) The power series using summation notation is:
[tex]\sum_{n=0}^{\infty} \dfrac{(10 (x - ln(10))^n)}{ n!}[/tex]
a)
To find the first four nonzero terms of the Taylor series for the function [tex]f(x) = e^x[/tex] centered at a = ln(10), we can use the formula for the Taylor series expansion:
[tex]f(x) = f(a) + \dfrac{f'(a)(x - a)}{1!} + \dfrac{f''(a)(x - a)^2}{2!} + \dfrac{f'''(a)(x - a)^3}{3!} + ...[/tex]
First, let's calculate the derivatives of [tex]f(x) = e^x[/tex]:
[tex]f(x) = e^x\\f'(x) = e^x\\f''(x) = e^x\\f'''(x) = e^x[/tex]
Now, let's evaluate these derivatives at a = ln(10):
[tex]f(a) = e^{(ln(10))}\ = 10\\f'(a) =e^{(ln(10))}\ = 10\\f''(a) =e^{(ln(10))}\ = 10\\f'''(a) = e^(ln(10)) = 10[/tex]
Plugging these values into the Taylor series formula:
[tex]f(x) = 10 + 10\dfrac{(x - ln(10))}{1!} + \dfrac{10(x - ln(10))^2}{2!} + \dfrac{10(x - ln(10))^3}{3!}[/tex]
Simplifying the terms:
[tex]f(x) = 10 + 10(x - ln(10)) + \dfrac{10(x - ln(10))^2}{2} + \dfrac{10(x - ln(10))^3}{3!}[/tex]
Therefore, the first four nonzero terms of the Taylor series for [tex]f(x) = e^x[/tex]centered at a = ln(10) are:
10, 10(x - ln(10)), [tex]\dfrac{5(x - ln(10))^2}{2}[/tex], [tex]\dfrac{(x - ln(10))^3}{3!}[/tex]
b) To write the power series using summation notation, we can rewrite the Taylor series as:
[tex]\sum_{n=0}^{\infty} \dfrac{(10 (x - ln(10))^n)}{ n!}[/tex]
Learn more about the Taylor series here:
brainly.com/question/23334489
#SPJ4
Direction: Read the problems carefully. Write your solutions in a separate sheet of paper. A. Solve for u= u(x, y) 1. + 16u = 0 Mel 4. Uy + 2yu = 0 3. Wy = 0 B. Apply the Power Series Method to the ff. 1. y' - y = 0 2. y' + xy = 0 3. y" + 4y = 0 4. y" - y = 0 5. (2 + x)y' = y 6. y' + 3(1 + x²)y= 0
Therefore, the power series solution is: y(x) = Σ(a_n *[tex]x^n[/tex]) = a_0 * (1 - [tex]x^2[/tex]
A. Solve for u = u(x, y):
16u = 0:
To solve this differential equation, we can separate the variables and integrate. Let's rearrange the equation:
16u = -1
u = -1/16
Therefore, the solution to this differential equation is u(x, y) = -1/16.
Uy + 2yu = 0:
To solve this first-order linear partial differential equation, we can use the method of characteristics. Assuming u(x, y) can be written as u(x(y), y), let's differentiate both sides with respect to y:
du/dy = du/dx * dx/dy + du/dy
Now, substituting the given equation into the above expression:
du/dy = -2yu
This is a separable differential equation. We can rearrange it as:
du/u = -2y dy
Integrating both sides:
ln|u| = [tex]-y^2[/tex] + C1
where C1 is the constant of integration. Exponentiating both sides:
u = C2 * [tex]e^(-y^2)[/tex]
where C2 is another constant.
Therefore, the solution to this differential equation is u(x, y) = C2 * [tex]e^(-y^2).[/tex]
Wy = 0:
This equation suggests that the function u(x, y) is independent of y. Therefore, it implies that the partial derivative of u with respect to y, i.e., uy, is equal to zero. Consequently, the solution to this differential equation is u(x, y) = f(x), where f(x) is an arbitrary function of x only.
B. Applying the Power Series Method to the given differential equations:
y' - y = 0:
Assuming a power series solution of the form y(x) = Σ(a_n *[tex]x^n[/tex]), where Σ denotes the sum over all integers n, we can substitute this expression into the differential equation. Differentiating term by term:
Σ(n * a_n * [tex]x^(n-1)[/tex]) - Σ(a_n * [tex]x^n[/tex]) = 0
Now, we can equate the coefficients of like powers of x to zero:
n * a_n - a_n = 0
Simplifying, we have:
a_n * (n - 1) = 0
This equation suggests that either a_n = 0 or (n - 1) = 0. Since we want a nontrivial solution, we consider the case n - 1 = 0, which gives n = 1. Therefore, the power series solution is:
y(x) = a_1 * [tex]x^1[/tex] = a_1 * x
y' + xy = 0:
Using the same power series form, we substitute it into the differential equation:
Σ(a_n * n * [tex]x^(n-1)[/tex]) + x * Σ(a_n * [tex]x^n[/tex]) = 0
Equating coefficients:
n * a_n + a_n-1 = 0
This equation gives us a recursion relation for the coefficients:
a_n = -a_n-1 / n
Starting with a_0 as an arbitrary constant, we can recursively find the coefficients:
a_1 = -a_0 / 1
a_2 = -a_1 / 2 = a_0 / (1 * 2)
a_3 = -a_2 / 3 = -a_0 / (1 * 2 * 3)
Therefore, the power series solution is:
y(x) = Σ(a_n * [tex]x^n[/tex]) = a_0 * (1 - [tex]x^2[/tex]
Learn more about Power series.
brainly.com/question/29896893
#SPJ11
Find the length and width of a rectangle that has perimeter 48 meters and a maximum area. 12 m;12 m. 16 m;9 m. 1 m;23 m. 13m; 11 m. 6 m;18 m.
The length and width of a rectangle that has a perimeter 48 meters and maximum area is 12 m and 12 m respectively. Here's how we can get to that conclusion:
Perimeter is defined as the sum of all sides of a polygon. A rectangle has two equal sides, thus we can find the perimeter as follows:
P = 2(l + w)
Given that P = 48 m, we have:
48 = 2(l + w)
Divide through by 2:
24 = l + w
We also know that the area of a rectangle is given by A = lw. We need to maximize this area subject to the constraint that the perimeter is 48 m. To do this, we can use the technique of completing the square and expressing the area as a quadratic function of one variable. Here's how:
24 = l + w
l = 24 − w
We can now write the area as a function of w:
A(w) = w(24 − w)
= 24w − w²
To maximize the area, we need to differentiate A with respect to w and set the result equal to zero:
dA/dw = 24 − 2w
= 0
w = 12
Plugging in w = 12, we find the corresponding value of l:
24 = l + 12
l = 12
Therefore, the length and width of the rectangle are 12 m and 12 m respectively.
Conclusion: The rectangle with perimeter 48 meters and maximum area has a length of 12 m and a width of 12 m.
To know more about length visit
https://brainly.com/question/32060888
#SPJ11
Find the absolute maximum and minimum values of the function, subject to the given constraints.
k(x,y) = − x^2 – y^2 + 10x+10y; 0≤x≤6, y≥0, and x + y ≤ 12
The minimum value of k is _____________ (Simplify your answer.)
The maximum value of k is __________ (Simplify your answer.)
Answer:
3
Step-by-step explanation:
I said so
the statistical technique used to estimate future values by successive observations of a variable at regular intervals of time that suggest patterns is called _____.
trend analysis
The statistical technique used to estimate future values by successive observations of a variable at regular intervals of time that suggest patterns is called trend analysis.
Trend analysis is a statistical technique that helps identify patterns and tendencies in a variable over time. It involves analyzing historical data collected at regular intervals to identify a consistent upward or downward movement in the variable.
By examining the sequential observations of the variable, trend analysis aims to identify the underlying trend or direction in which the variable is moving. This technique is particularly useful when there is a time-dependent relationship in the data, and past observations can provide insights into future values.
Trend analysis typically involves plotting the data points on a time series chart and visually inspecting the pattern. It helps in identifying trends such as upward or downward trends, seasonality, or cyclic patterns. Additionally, mathematical models and statistical methods can be applied to quantify and forecast the future values based on the observed trend.
This statistical technique is widely used in various fields, including finance, economics, marketing, and environmental sciences. It assists in making informed decisions and predictions by understanding the historical behavior of a variable and extrapolating it into the future.
Learn more about: Statistical technique
brainly.com/question/32688529
#SPJ11
Let f(x,y)=3yx (a) Find f(4,8),f2(4,8), and fy(4,8). (b) Use your answers from part (a) to estimate the value of 3.99/3√8.02.
Therefore, an estimate for 3.99 / √8.02 using the given function and its derivatives is approximately 0.1146.
(a) To find the values of f(4,8), f_x(4,8), and f_y(4,8), we need to evaluate the function f(x, y) and its partial derivatives at the given point (4, 8).
Plugging in the values (x, y) = (4, 8) into the function f(x, y) = 3yx, we have:
f(4, 8) = 3(8)(4)
= 96
To find the partial derivative f_x(4, 8), we differentiate f(x, y) with respect to x while treating y as a constant:
f_x(x, y) = 3y
Evaluating this derivative at (x, y) = (4, 8), we get:
f_x(4, 8) = 3(8)
= 24
To find the partial derivative f_y(4, 8), we differentiate f(x, y) with respect to y while treating x as a constant:
f_y(x, y) = 3x
Evaluating this derivative at (x, y) = (4, 8), we get:
f_y(4, 8) = 3(4)
= 12
Therefore, f(4, 8) = 96, f_x(4, 8) = 24, and f_y(4, 8) = 12.
(b) Using the values obtained in part (a), we can estimate the value of 3.99 / √8.02 as follows:
3.99 / √8.02 ≈ (f(4, 8) + f_x(4, 8) + f_y(4, 8)) / (f(4, 8) * f_y(4, 8))
Substituting the values:
3.99 / √8.02 ≈ (96 + 24 + 12) / (96 * 12)
≈ 132 / 1152
≈ 0.1146
To know more about function,
https://brainly.com/question/31321635
#SPJ11
Suppose that the demand function for a product is given by D(p)=70,000/p and that the price p is a function of time given by p=1.8t+11, where t is in days. a) Find the demand as a function of time t. b) Find the rate of change of the quantity demanded when t=105 days. a) D(t)= (Simplify your answer.) b) What is the approximate rate of change of the quantity demanded when t=105 days? units/day. (Simplify your answer. Round to three decimal places as needed.)
a) To find the demand as a function of time, we substitute the expression for price, p=1.8t+11, into the demand function D(p)=70,000/p.
D(t) = 70,000/(1.8t+11)
Simplifying further, we can write:
D(t) = 70,000/(1.8t+11)
b) To find the rate of change of the quantity demanded when t=105 days, we need to find the derivative of the demand function D(t) with respect to time, and then evaluate it at t=105.
Taking the derivative of D(t) with respect to t, we use the quotient rule:
D'(t) = -70,000(1.8)/(1.8t+11)^2
Substituting t=105 into D'(t), we have:
D'(105) = -70,000(1.8)/(1.8(105)+11)^2
To find the approximate rate of change of the quantity demanded, we can calculate the numerical value of D'(105) using a calculator or computer software. Round the answer to three decimal places for simplicity.
a) The demand function D(p) gives the relationship between the price of a product and the quantity demanded. By substituting the expression for price p in terms of time into the demand function, we obtain the demand as a function of time, D(t).
b) The rate of change of the quantity demanded represents how fast the demand is changing with respect to time. To find this rate, we calculate the derivative of the demand function with respect to time, which measures the instantaneous rate of change. By evaluating the derivative at t=105 days, we can determine the specific rate of change at that particular point in time. This rate gives us insight into how the quantity demanded is changing over time, allowing us to analyze trends and make predictions.
Learn more about derivative here:
brainly.com/question/29144258
#SPJ11
Suppose you take out a loan for 180 days in the amount of $13,500 at 11% ordinary interest. After 50 days, you make a partial payment of $1,000. What is the final amount due on the loan? (Round to the nearest cent)
The final amount due on the loan after the partial payment is approximately $13,070.41 (rounded to the nearest cent).
To calculate the final amount due on the loan, we need to consider the principal amount, the interest accrued, and the partial payment made.
Given information:
Principal amount: $13,500
Interest rate: 11% (per year)
Loan period: 180 days
Partial payment: $1,000
Partial payment date: 50 days
First, let's calculate the interest accrued on the loan from the loan start date to the partial payment date:
Interest accrued = Principal amount * Interest rate * (Number of days / 365)
Interest accrued = $13,500 * 11% * (50 / 365)
Interest accrued ≈ $201.37
Next, let's calculate the remaining principal balance after the partial payment:
Remaining principal balance = Principal amount - Partial payment
Remaining principal balance = $13,500 - $1,000
Remaining principal balance = $12,500
Now, let's calculate the interest accrued on the remaining principal balance for the remaining loan period (180 - 50 days):
Interest accrued = Remaining principal balance * Interest rate * (Number of days / 365)
Interest accrued = $12,500 * 11% * (130 / 365)
Interest accrued ≈ $570.41
Finally, we can calculate the final amount due on the loan by adding the remaining principal balance and the interest accrued:
Final amount due = Remaining principal balance + Interest accrued
Final amount due = $12,500 + $570.41
Final amount due ≈ $13,070.41
Therefore, the final amount due on the loan after the partial payment is approximately $13,070.41 (rounded to the nearest cent).
Learn more about loan here
https://brainly.com/question/30130621
#SPJ11
Find the absolute maximum and minimum values of the function over the indicated interval, and indicate the x-values at which they occur.
f(x) = 9x+5
(A) [0,5]
(B) [−6,3]
(A) The absolute maximum value is ____ at x = ____
(Use a comma to separate answers as needed.).
The absolute minimum value is ____at x= ____
(Use a comma to separate answers as needed.)
(B) The absolute maximum value is ____ at x= _____
(Use a comma to separate answers as needed.)
The absolute minimum value is _____at x=_____
(Use a comma to separate answers as needed.)
Given function is f(x) = 9x + 5, which is to be found the absolute maximum and minimum values over the indicated interval, and indicate the x-values at which they occur.The intervals (A) [0, 5] and (B) [−6, 3] is given.A. When the interval is [0, 5],
The function values are given by f(x) = 9x + 5, for the interval [0, 5].Therefore, the f(0) = 9(0) + 5 = 5, f(5) = 9(5) + 5 = 50.Thus, the absolute maximum value is 50 at x = 5 and the absolute minimum value is 5 at x = 0.B. When the interval is [−6, 3],The function values are given by f(x) = 9x + 5, for the interval [−6, 3].Therefore, the f(-6) = 9(-6) + 5 = -43, f(3) = 9(3) + 5 = 32.Thus, the absolute maximum value is 32 at x = 3 and the absolute minimum value is -43 at x = -6.Explanation:Thus, the absolute maximum and minimum values of the function f(x) = 9x + 5 over the indicated intervals (A) [0, 5] and (B) [−6, 3], and indicated the x-values at which they occur are summarized as follows. A. For the interval [0, 5], the absolute maximum value is 50 at x = 5 and the absolute minimum value is 5 at x = 0.B. For the interval [−6, 3], the absolute maximum value is 32 at x = 3 and the absolute minimum value is -43 at x = -6.
Thus, the absolute maximum and minimum values of the function f(x) = 9x + 5 over the indicated intervals (A) [0, 5] and (B) [−6, 3], and indicated the x-values at which they occur.
To know more about function visit
https://brainly.com/question/26304425
#SPJ11
Two matrices can only be multiplied if they each have the same number of entries.
• True
• False
The statement is false. Two matrices can be multiplied only if the number of columns in the first matrix matches the number of rows in the second matrix.
The given statement is incorrect. Matrix multiplication requires a specific condition: the number of columns in the first matrix must be equal to the number of rows in the second matrix. The resulting matrix will have the same number of rows as the first matrix and the same number of columns as the second matrix. The entries of the resulting matrix are obtained by taking the dot product of each row of the first matrix with each column of the second matrix. Therefore, it is not necessary for the two matrices to have the same number of entries, but rather they need to satisfy the condition mentioned above.
For more information on matrices visit: brainly.com/question/29256260
#SPJ11
froen 1oday 2 t nccording to the uriblaspd expectintions theory? (Do not round intermediate calculations. Rtound yout percentage answer to 2 decimal places: (ee−32.16) ) from today, a fa eccording to the unblased expectations theory? (Do rot round intermediate calculations. Rourd your percentage answer to 2 decimal ploces. (e.9. 32.16))
According to the unbiased expectations theory, the forward rate from today to a future date can be estimated by taking the exponential of the difference between the interest rates. The percentage answer, rounded to two decimal places is 3.08 x [tex]10^{-13}[/tex] percent.
The unbiased expectations theory is a financial theory that suggests the forward rate for a future date can be determined by considering the difference in interest rates. In this case, we need to calculate the forward rate from today to a future date. The formula for this calculation is [tex]e^{(-r*t)}[/tex], where "r" represents the interest rate and "t" represents the time period.
In the given question, the interest rate is -32.16. To calculate the forward rate, we need to take the exponential of the negative interest rate. The exponential function is denoted by "e" in mathematical notation. Therefore, the calculation would be [tex]e^{-32.16}[/tex].
To arrive at the final answer, we can use a calculator or computer software to evaluate the exponential function. The result is approximately 3.0797 x [tex]10^{-15}[/tex].
To convert this to a percentage, we multiply the result by 100. So, the forward rate from today to the future date, according to the unbiased expectations theory, is approximately 3.08 x [tex]10^{-13}[/tex] percent.
Please note that the specific date for the future period is not mentioned in the question, so the calculation assumes a generic forward rate calculation from today to any future date.
Learn more about unbiased expectations theory here:https://brainly.com/question/30478946
#SPJ11
Problem 4. Consider the plant with the following state-space representation. 0 *---**** _x+u; U; = y = [1 0]x
(a) Design a state feedback controller without integral control to yield a 5% overshoot and 2 sec settling time. Evaluate the steady-state error for a unit step input.
(b) Redesign the state feedback controller with integral control; evaluate the steady-state error for a unit step input. Required Steps:
(i) Obtain the gain matrix of K by means of coefficient matching method or Ackermann's formula by hand. You may validate your results with the "acker" or "place" function in MATLAB.
(ii) Use the following equation to determine the steady-state error for a unit step input, ess=1+ C(A - BK)-¹B
(iii) When ee-designing the state feedback controller with integral control, obtain the new gain matrix of K = [k₁ k₂] and ke
State feedback controllers with integral control are useful for reducing or eliminating steady-state errors in a system. The following is a step-by-step process for designing a state feedback controller with integral control:Problem 4 Consider the plant with the following state-space representation.
0⎡⎣x˙x⎤⎦=[0−4.4−20.6]⎡⎣xu⎤⎦y=[10]Part (a)To get a 5% overshoot and 2-second settling time, we design a state feedback controller without integral control. The first step is to check the controllability and observability of the system.The rank of the controllability matrix is 2, which is equal to the number of states, indicating that the system is controllable. The system is also observable since the rank of the observability matrix is 2.
The poles of the closed-loop system can now be placed using Ackermann's formula or the coefficient matching method. Ackermann's formula is used in this example. The poles are located at -5 ± 4.83i.K = acker(A,B,[-5-4.83j,-5+4.83j])The gain matrix is calculated as:K = [4.4000 10.6000]The steady-state error for a unit step input is calculated using the following equation:ess=1+ C(A - BK)-¹Bwhere C = [1 0] and D = 0. The steady-state error for a unit step input is found to be 0.Part (b)To reduce the steady-state error to zero, integral control is added to the system. The augmented system's state vector is [x xₐ]
To know more about integral visit:
https://brainly.com/question/31433890
#SPJ11
How can you check in a practical way if something is straight? How do you construct something straight - lay out fence posts in a straight line, or draw a straight line? Do this without assuming that
Checking if something is straight requires practical knowledge and skills. Here are some ways to check in a practical way if something is straight:
1. Using a levelThe easiest way to tell if something is straight is by using a level. A level is a tool that has a glass tube filled with liquid, containing a bubble that moves to indicate whether a surface is level or not. It is useful when checking the straightness of surfaces or objects that are supposed to be straight. For instance, when constructing a bookshelf or shelf, you can use a level to ensure that the shelves are level.
2. Using a plumb bobA plumb bob is a tool that you can use to check whether something is straight up and down, also called vertical. A plumb bob is a weight hanging on the end of a string. The string can be attached to the object being checked, and the weight should hang directly above the line or point being checked.
3. Using a straight edgeA straight edge is a tool that you can use to check if something is straight. It is usually a long piece of wood or metal with a straight edge. You can hold it against the object being checked to see if it is straight.
4. Using a laser levelA laser level is a tool that projects a straight, level line onto a surface. You can use it to check if a surface or object is straight. It is useful for checking longer distances.
In conclusion, there are different ways to check if something is straight. However, the most important thing is to have the right tools and knowledge. Using a level, a plumb bob, a straight edge, or a laser level can help you check if something is straight. Having these tools and the knowledge to use them can help you construct something straight, lay out fence posts in a straight line, or draw a straight line.
To know more about straight visit
https://brainly.com/question/25224753
#SPJ11
Find the volume of the solid generated by revolving the region bounded above by y =11 cos x and below by y=4 sec x, -π/4 s x ≤ π/4 about the x-axis
To find the volume of the solid generated by revolving the region bounded above by y =11 cos x and below by y=4 sec x, -π/4 ≤ x ≤ π/4 about the x-axis, we use the Disk method.
Here are the steps to follow in order to solve the problem:
Step 1: Sketch the region to be rotated. Notice that the region is bound above by `y = 11 cos x` and bound below by `y = 4 sec x`.
Step 2: Compute the interval of rotation. Notice that `-π/4 ≤ x ≤ π/4`.
Step 3: Draw an arbitrary vertical line in the region, then rotate that line around the x-axis.
Step 4: Compute the radius of the disk for a given `x`-value. This is equal to the distance from the axis of rotation to the edge of the solid, or in this case, the distance from the x-axis to the function that is farthest away from the axis of rotation.
The distance from the x-axis to `y = 11 cos x` is `11 cos x`, while the distance from the x-axis to `y = 4 sec x` is `4 sec x`. Since we are rotating around the x-axis, we use the formula `r = y`. Thus, the radius of the disk is `r = max(11 cos x, 4 sec x)`.
Step 5: Compute the volume of each disk. The volume of a disk is given by `V = πr²Δx`.
Step 6: Integrate to find the total volume of the solid. Thus, the volume of the solid is given by:
[tex]$$\begin{aligned}V &= \int_{-\frac{\pi}{4}}^{\frac{\pi}{4}} π(11\cos x)^2 - π(4\sec x)^2 dx \\ &= π\int_{-\frac{\pi}{4}}^{\frac{\pi}{4}} (121 \cos^2 x - 16 \sec^2 x) dx\\ &= π\int_{-\frac{\pi}{4}}^{\frac{\pi}{4}} \frac{121}{2}\cos 2x - \frac{16}{\cos^2 x} dx\\ &= π\left[\frac{121}{4} \sin 2x + 16 \tan x\right]_{-\frac{\pi}{4}}^{\frac{\pi}{4}}\\ &= π\left[\frac{121}{2} + 32\sqrt{2}\right]\end{aligned}$$[/tex]
Thus, the volume of the solid generated by revolving the region bounded above by y =11 cos x and below by y=4 sec x, -π/4 ≤ x ≤ π/4 about the x-axis is `V = π(121/2 + 32√2)`.
To know more about volume visit:
https://brainly.com/question/28058531
#SPJ11
Given the region bounded above by y = 11cos x and below by y = 4sec x, -π/4 ≤ x ≤ π/4. Find the volume of the solid generated by revolving this region about the x-axis.
To find the volume of the solid generated by revolving the given region about the x-axis, we can use the formula:V = π∫ab(R(x))^2 dxwhere R(x) is the radius of the shell at x and a and b are the limits of integration.Here, the region is bounded above by y = 11cos x and below by y = 4sec x, -π/4 ≤ x ≤ π/4.At x = -π/4, the value of cos x is minimum and the value of sec x is maximum.
At x = π/4, the value of cos x is maximum and the value of sec x is minimum.Thus, we take a = -π/4 and b = π/4.Let us sketch the given region:We need to revolve the region about the x-axis. Hence, the radius of each shell is the distance from the x-axis to the curve at a given value of x.The equation of the curve above is y = 11cos x. Thus, the radius of the shell is given by:R(x) = 11cos x
The equation of the curve below is y = 4sec x. Thus, the radius of the shell is given by:R(x) = 4sec x
Using the formula: V = π∫ab(R(x))^2 dx The volume of the solid generated by revolving the region about the x-axis is given by:V = π∫(-π/4)^(π/4)(11cos x)^2 dx + π∫(-π/4)^(π/4)(4sec x)^2 dx= π∫(-π/4)^(π/4)121cos^2 x dx + π∫(-π/4)^(π/4)16sec^2 x dx= π∫(-π/4)^(π/4)121/2[1 + cos(2x)] dx + π∫(-π/4)^(π/4)16[1 + tan^2 x] dx= π[121/2(x + 1/4sin(2x))](-π/4)^(π/4) + π[16(x + tan x)](-π/4)^(π/4)= π[121/2(π/4 + 1/4sin(π/2))] + π[16(π/4 + tan(π/4/2))] - π[121/2(-π/4 + 1/4sin(-π/2))] - π[16(-π/4 + tan(-π/4/2))]= π(363/4 + 16π/3)The volume of the solid generated by revolving the region about the x-axis is π(363/4 + 16π/3) cubic units.
To know more about volume, visit:
https://brainly.com/question/14197390
#SPJ11
a.Solve for the general implicit solution of the below equation
y′(x)=x(y−1)^3
Can you find a singular solution to the above equation? i.e. one that does not fit in the general solution.
b. For the above equation, solve the initial value problem y(0)=2.
The general implicit solution of the equation y'(x) = x(y-1)^3 is given by (y-1)^4/4 = x^2/2 + C, where C is the constant of integration.
The given differential equation, we can use separation of variables. Rearranging the equation, we have dy/(y-1)^3 = x dx.
Integrating both sides, we get ∫dy/(y-1)^3 = ∫x dx.
The integral on the left side can be evaluated using a substitution. Let u = y-1, then du = dy. Substituting back, we have ∫du/u^3 = ∫x dx.
Integrating both sides, we get -1/(2(u^2)) = (x^2)/2 + C1.
Replacing u with y-1, we have -1/(2(y-1)^2) = (x^2)/2 + C1.
Simplifying further, we have (y-1)^2 = -1/(x^2) - 2C1.
Taking the square root of both sides, we get y-1 = ±√[-1/(x^2) - 2C1].
Adding 1 to both sides, we obtain the general implicit solution: y = 1 ± √[-1/(x^2) - 2C1].
This is the general solution to the given differential equation.
For part b, to solve the initial value problem y(0) = 2, we substitute x = 0 and y = 2 into the general solution.
y = 1 ± √[-1/(0^2) - 2C1] = 1 ± √[-∞ - 2C1].
Since the expression under the square root is undefined, we cannot determine a singular solution that satisfies the initial condition y(0) = 2. Therefore, there is no singular solution in this case.
In summary, the general implicit solution of the equation y'(x) = x(y-1)^3 is (y-1)^4/4 = x^2/2 + C, where C is the constant of integration. Additionally, there is no singular solution that satisfies the initial condition y(0) = 2.
To learn more about initial value
brainly.com/question/17613893
#SPJ11
Use interval notation to indicate where
f(x)= x−6 / (x−1)(x+4) is continuous.
Answer: x∈
Note: Input U, infinity, and -infinity for union, [infinity], and −[infinity], respectively.
The function f(x) = (x - 6) / ((x - 1)(x + 4)) is continuous for certain intervals of x. The intervals where f(x) is continuous can be expressed using interval notation.
To determine where f(x) is continuous, we need to consider the values of x that make the denominator of the function non-zero. Since the denominator is (x - 1)(x + 4), the function is not defined for x = 1 and x = -4.
Therefore, to express the intervals where f(x) is continuous, we exclude these values from the real number line. In interval notation, we indicate this as:
x ∈ (-∞, -4) U (-4, 1) U (1, ∞).
This notation represents the set of all x-values where the function f(x) is defined and continuous. It indicates that x can take any value less than -4, between -4 and 1 (excluding -4 and 1), or greater than 1. In these intervals, the function f(x) is continuous and can be evaluated without any discontinuities or breaks.
Learn more about interval here:
https://brainly.com/question/11051767
#SPJ11
if the trapezoid is reflected across the x-axis, what are the coordinates of B? A. (-9, -5) B. (-9,5) C. (-5,9) D. (5,-9)
Answer:
B'(5,-9)
Step-by-step explanation:
When reflecting across the x-axis, the "x" coordinate stays the same, and the "y" coordinate just becomes the opposite. So, the opposite of 9 is -9!
Therefore, B' is (5,-9), or "D"
Hope this helps!
Find the arc length of the curve defined by the equations x(t)=3t2,y(t)=2t3,1≤t≤3.
The arc length of the curve defined by equations x(t)=3t2,y(t)=2t3,1t3 is 84.7379 units.
The arc length of the curve defined by the equations x(t)=3t²,y(t)=2t³,1≤t≤3 is given by the following formula;
[tex]$$L = \int_{a}^{b} \sqrt{\left[\frac{dx}{dt}\right]^2+\left[\frac{dy}{dt}\right]^2} dt$$[/tex]
where a=1, b=3.Let's evaluate this integral as follows:
[tex]$$L = \int_{1}^{3} \sqrt{\left[\frac{dx}{dt}\right]^2+\left[\frac{dy}{dt}\right]^2} dt$$$$[/tex]
[tex]= \int_{1}^{3} \sqrt{\left[\frac{d}{dt}\left(3t^2\right)\right]^2+\left[\frac{d}{dt}\left(2t^3\right)\right]^2} dt$$$$[/tex]
[tex]= \int_{1}^{3} \sqrt{\left[6t\right]^2+\left[6t^2\right]^2} dt$$$$[/tex]
[tex]= \int_{1}^{3} \sqrt{36t^2+36t^4} dt$$$$= \int_{1}^{3} 6t\sqrt{1+t^2} dt$$[/tex]
Now, we can substitute [tex]$u=1+t^2$.[/tex]
Then,[tex]$du=2tdt$ and $t=\sqrt{u-1}$.[/tex]
Hence;[tex]$$L = 3\int_{2}^{10} \sqrt{u} du$$$$[/tex]
= [tex]3\cdot\frac{2}{3}\left[10^{\frac{3}{2}}-2^{\frac{3}{2}}\right]$$$$[/tex]
=[tex]2\left(10^{\frac{3}{2}}-2^{\frac{3}{2}}\right)$$$$[/tex]
= [tex]84.7379\text{ units}$$[/tex]
Therefore, the arc length of the curve defined by the equations x(t)=3t²,y(t)=2t³,1≤t≤3 is 84.7379 units.
To know more about arc length Visit:
https://brainly.com/question/31762064
#SPJ11
Ayana has saved $200 and spends $25 each week. Michelle just started saving $15 per week. in how many weeks will Ayana and Michelle have the same amound of money saved?
Answer:
In 5 weeks, Ayana and Michelle have the same amount of money saved
(Namely $75)
Step-by-step explanation:
Ayana has $200 and spends $25 per week.
Michelle has $0 and saves $15 per week.
So, after one week,
Ayana has $200 - $25 = $175
Michelle has $0 + $ 15 = $15
After 2 weeks,
Ayana has $175 - $25 = $150
Michelle has $15 + $15 = $30
After 4 weeks,
Ayana has $150 - $50 = $100
Michelle has $30 + $30 = $60
After 5 weeks,
Ayana has $100 - $25 = $75
Michelle has $60 + $15 = $75
So, in 5 weeks, Ayana and Michelle have the same amount of money saved
Ayana and Michelle will have the same amount of money saved in 5 weeks.
To calculate the number of weeks Ayana and Michelle will take to have the same ammount of money, we have to make use of assumption. The reason for this is, as the number of weeks are yet to be found, so the value can only be found by substituting that particular entity into a variable.
Let's assume that number of weeks Ayana and Michelle will take to have the same ammount of money is "x".
So, Amount saved by Ayana after x weeks will be $200 - $25*x,
Amount saved by Michelle in x weeks will be $15 * x.
In the question, we have been told that Ayana and Michelle have the same amount of money saved, So we need to equate to above two equations to find the value of "x".
$200 - $25*x = $15 * x
$200 = $15 * x + $25*x
$200 = $40*x
$200 / $40 = x
x = 5
Therefore, Ayana and Michelle will take 5 weeks to have the same amound of money saved.
To study more about Assumption:
https://brainly.com/question/29672185
Consider a pyramid whose base is a regular \( n \)-gon-that is, a regular polygon with \( n \) sides. How many vertices would such a pyramid have? How many faces? How many edges? vertices faces edges
- Vertices: \(n + 1\)
- Faces: \(n + 1\)
- Edges: \(2n\)
A pyramid whose base is a regular \(n\)-gon has the following characteristics:
1. Vertices: The pyramid has one vertex at the apex, and each vertex of the regular \(n\)-gon base corresponds to a vertex of the pyramid. Therefore, the total number of vertices is \(n + 1\).
2. Faces: The pyramid has one base face, which is the regular \(n\)-gon. In addition, there are \(n\) triangular faces connecting each vertex of the base to the apex. So, the total number of faces is \(n + 1\).
3. Edges: Each edge of the regular \(n\)-gon base is connected to the apex, giving \(n\) edges for the triangular faces. Also, there are \(n\) edges around the base of the pyramid. Therefore, the total number of edges is \(2n\).
To summarize:
- Vertices: \(n + 1\)
- Faces: \(n + 1\)
- Edges: \(2n\)
These values hold for a pyramid with a regular \(n\)-gon as its base.
to learn more about Vertices.
https://brainly.com/question/32689497
#SPJ11
Consider a four-step serial process with processing times given in the following list. There is one machine at each step of the process, and this is a machine-paced process. - Step 1: 20 minutes per unit - Step 2: 17 minutes per unit - Step 3: 27 minutes per unit - Step 4: 23 minutes per unit Assuming that the process starts out empty, how long will it take (in hours) to complete a batch of 105 units?
It will take approximately 152.25 hours to complete a batch of 105 units in this four-step serial process.
To calculate the total time required to complete a batch of 105 units in a four-step serial process, we need to add up the processing times at each step.
Step 1: 20 minutes per unit × 105 units = 2100 minutes
Step 2: 17 minutes per unit × 105 units = 1785 minutes
Step 3: 27 minutes per unit × 105 units = 2835 minutes
Step 4: 23 minutes per unit × 105 units = 2415 minutes
Now, let's add up the processing times at each step to get the total time:
Total time = Step 1 time + Step 2 time + Step 3 time + Step 4 time
= 2100 minutes + 1785 minutes + 2835 minutes + 2415 minutes
= 9135 minutes
Since there are 60 minutes in an hour, we can convert the total time to hours:
Total time in hours = 9135 minutes / 60 minutes per hour
≈ 152.25 hours
Learn more about four step serial process here: brainly.com/question/14868423
#SPJ11
HELP! why is the answer 55 if a triangle adds up to 180 degrees,
so 180 - (55+78) equals 47 should be the answer.
The answer is 55 because you are only adding the two angles that you know the measure of. The third angle of the triangle is not given, so you cannot simply subtract the two known angles from 180 degrees.
The sum of the interior angles of a triangle is always 180 degrees. If you know the measure of two of the angles, you can subtract those two angles from 180 degrees to find the measure of the third angle.
However, if you only know the measure of one angle, you cannot simply subtract that angle from 180 degrees to find the measure of the other two angles.
The Triangle Angle Sum Theorem states that the sum of the interior angles of a triangle is always 180 degrees. This means that if you know the measure of two of the angles in a triangle, you can subtract those two angles from 180 degrees to find the measure of the third angle.
For example, if you know that the measure of one angle in a triangle is 55 degrees and the measure of another angle is 78 degrees, you can subtract those two angles from 180 degrees to find that the measure of the third angle is 47 degrees.
However, if you only know the measure of one angle in a triangle, you cannot simply subtract that angle from 180 degrees to find the measure of the other two angles.
This is because the other two angles could be any value between 0 and 180 degrees, as long as their sum is 180 degrees minus the measure of the known angle.
In the problem you mentioned, you are only given the measure of one angle in the triangle. Therefore, you cannot simply subtract that angle from 180 degrees to find the measure of the other two angles. The answer is 55 because that is the measure of the third angle in the triangle.
To know more about theorem click here
brainly.com/question/30242664
#SPJ11
Which of these diagrams shows the locus of points that are a) less than 4 cm from P and less than 3 cm from Q? b) less than 4 cm from P and more than 3 cm from Q? 4 cm 4 cm pl 3 cm Q 3 cm TQ B E 4 cm 4 cm 3 cm 3 cm ¹Q с F 4 cm 4 cm 3 cm 3 cm
a) The diagram that shows the locus of points that are less than 4 cm from P and less than 3 cm from Q is: B. diagram B.
b) The diagram that shows the locus of points that are less than 4 cm from P and more than 3 cm from Q is: E. diagram E.
What is a locus?In Mathematics and Geometry, a locus refers to a set of points which all meets and satisfies a stated condition for a geometrical figure (shape) such as a circle. This ultimately implies that, the locus of points defines a geometrical shape such as a circle in geometry.
In this context, we can logically deduce that the locus of points that are less than 4 cm from P and 3 cm from Q would be located inside the circle and centered at point P and point Q respectively, as depicted in diagram B i.e (P∩Q) region.
Similarly, the locus of points that are less than 4 cm from P and more than 3 cm from Q would be located inside the circle and centered at point P, and outside the circle and centered at point Q respectively, as depicted in diagram E i.e (P - Q) region.
Read more on locus of a point here: brainly.com/question/23824483
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
Calculate \( 19_{10}-27_{10} \) using 8-bit signed two's complement arithmetic. Show all workings - Convert \( 19_{10} \) into binary [0.5 mark] - Convert \( 27_{10} \) into binary [0.5 mark] - What i
The result we obtain after two's complement subtraction is, which is consistent with decimal subtraction.
We solve this question by applying all the steps of two's complement subtraction.
First, we convert 27₁₀ to its binary form.
27₁₀ = 1(2⁴) + 1(2³) + 0(2²) + 1(2¹) + 1(2⁰)
= (00011011)₂
Next, we get the two's complement by interchanging 0s with 1s and vice-versa.
Two's complement = 11100100 + 1 = (11100101)₂
Now for the original subtraction, we just add the binary form of 19 into the two's complement of 27.
19₁₀ = 1(2⁴) + 0(2³) + 0(2²) + 1(2¹) + 1(2⁰)
= 00010011
(00010011)₂ + (11100101)₂ = 1 00001000
The first bit is the sign bit, which indicates whether the number is positive or negative. The rest of the 8 bits form the number.
Here, the sign bit is 1. So it is a negative number.
The rest of the binary digits represent the number 8.
Therefore, as we know, the subtraction of 27 from 19 gives us -8 through two's complement subtraction.
For more on Two's complement,
brainly.com/question/17227881
#SPJ4
Table 2 shows the data on idle time per day in minutes for a worker in a machine position. In this idle time neither the worker nor the machine is working. Consider that the working day is 8 effective hours.
Table 2.
Daily idle times at the machine station
Day Minutes
1 40
2 35
3 25
4 38
5 25
6 40
7 30
8 37
9 38
10 25
11 26
12 28
13 35
14 23
15 33
16 37
17 28
18 32
19 30
20 33
21 33
22 24
23 33
24 32
25 28
Construct the control chart for the idle time ratio for this study based on three standard deviations, showing the control limits and the idle time ratio data. It must show the calculations and graph the result of the analysis carried out for the information in Table 2.
The resulting control chart will help identify any points that fall outside the control limits, indicating potential anomalies or special causes of variation in the idle time ratio.
To construct the control chart for the idle time ratio based on three standard deviations, we need to follow several steps:
Step 1: Calculate the average idle time ratio.
To calculate the idle time ratio, we divide the idle time (in minutes) by the total effective working time (in minutes). In this case, the total effective working time per day is 8 hours or 480 minutes. Calculate the idle time ratio for each day using the formula:
Idle Time Ratio = Idle Time / Total Effective Working Time
Day 1: 40 / 480 = 0.083
Day 2: 35 / 480 = 0.073
...
Day 25: 28 / 480 = 0.058
Step 2: Calculate the average idle time ratio.
Sum up all the idle time ratios and divide by the number of days to find the average idle time ratio:
Average Idle Time Ratio = (Sum of Idle Time Ratios) / (Number of Days)
Step 3: Calculate the standard deviation.
Calculate the standard deviation of the idle time ratio using the formula:
Standard Deviation = sqrt((Sum of (Idle Time Ratio - Average Idle Time Ratio)^2) / (Number of Days))
Step 4: Calculate the control limits.
The upper control limit (UCL) is the average idle time ratio plus three times the standard deviation, and the lower control limit (LCL) is the average idle time ratio minus three times the standard deviation.
UCL = Average Idle Time Ratio + 3 * Standard Deviation
LCL = Average Idle Time Ratio - 3 * Standard Deviation
Step 5: Plot the control chart.
Plot the idle time ratio data on a graph, along with the UCL and LCL calculated in Step 4. Each data point represents the idle time ratio for a specific day.
The resulting control chart will help identify any points that fall outside the control limits, indicating potential anomalies or special causes of variation in the idle time ratio.
Note: Since the calculations involve a large number of values and the table provided is not suitable for easy calculation, I recommend using a spreadsheet or statistical software to perform the calculations and create the control chart.
Learn more about anomalies here
https://brainly.com/question/13448501
#SPJ11
Find the area and perimeter of the figure on the coordinate system below.
The area and perimeter of the shape are 29 units² and 22.6 units respectively.
What is area and perimeter of shape?The area of a figure is the number of unit squares that cover the surface of a closed figure.
Perimeter is a math concept that measures the total length around the outside of a shape.
Using Pythagorean theorem to find the unknown length
DE = √ 4²+2²
= √ 16+4
= √20
= 4.47 units
AE = √3²+2²
AE = √9+4
= √13
= 3.6
AB = √ 3²+1²
AB = √ 9+1
AB = √10
AB = 3.2
BC = √ 6²+2²
BC = √ 36+4
BC = √40
BC = 6.3
Therefore the perimeter
= 6.3 + 3.2+ 3.6 +4.5 +5
= 22.6 units
Area = 1/2bh + 1/2(a+b) h + 1/2bh
= 1/2 ×6 × 2 ) + 1/2( 7+6)3 + 1/2 ×7×1
= 6 + 19.5 + 3.5
= 29 units²
Therefore the area of the shape is 29 units²
learn more about area and perimeter of shapes from
https://brainly.com/question/19749278
#SPJ1