How to add two on/off switches that can change the brightness of the light in circuit a without turning it off

Answer:

accuracy

Explanation:

You are trying to measure the mass of several different objects when you realize that there is a large wad of gum stuck to the underside of the balance pan. Removing the gum will improve the accuracy of your measurements.

Answer:

It is a piezoelectric material. It produces and accumulates electric charge when subjected to mechanical stress

4. The X-rays, ultraviolet light, and gamma rays all can travel through interplanetary space, so they are examples of waves is a False.

5. The amplitude of water waves as you get farther from the disturbance that caused them decreases.

The electromagnetic spectrum consists of the range of all types of EM radiation. Radiation is packet of energy that travels and spreads out. It has radio waves, infrared waves, visible light waves, ultraviolet rays and microwaves.

They possess high energy even to penetrate deep within the material. The electromagnetic spectrum has longer wavelength and less frequency.

4. The Earth's environment is thick an adequate number of that for all intents and purposes no X-beams can come through from space the entire way to the Earth's surface. This is great as far as we're concerned yet in addition terrible for stargazing. We need to put X-beam telescopes and identifiers on satellites.

Thus, X-rays, ultraviolet light, and gamma rays all can travel through interplanetary space, so they are examples of wave is a False statement.

5. The amplitude of the wave decreases as the time period increases. But when we get far from the disturbance, the amplitude increases.

Thus, the amplitude of water wave increases as we get farther from the disturbance.

Learn more about electromagnetic spectrum.

https://brainly.com/question/23727978

#SPJ1

Answer:

electrons can be knocked loose from one object and picked up by the other. The object that gains electrons becomes negatively charged, while the object that loses electrons becomes positively charged.

Explanation:

Hello !

Contact force:-A contact force is any force that requires contact to occur. examples Applied force,

Normal force,

Frictional force,

Tension force,

Air resistance force,

Spring force.

Non-contact force:-is a force which acts on an object without coming physically in contact with it. types of non-contact forces are gravitational force, magnetic force, electrostatic and nuclear force.

frictional force:-is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.

Normal reaction force:-A force acting perpendicular to two surfaces in contact with each other.

The tension force is defined as the force that is transmitted through a rope, string or wire when pulled by forces acting from opposite sides.

The force exerted by a spring on objects attached to its ends is proportional to the spring's change in length away from its equilibrium length and is always directed towards its equilibrium position. F = -kx. The proportional constant k is called the spring constant.

During the collision, each body exerts a force on the other. This force is called an impulsive force.

The gravitational force :-is a force that attracts any two objects with mass. We call the gravitational force attractive because it always tries to pull masses together, it never pushes them apart.

The electrostatic force is also known as the Coulomb force or Coulomb interaction. It's the attractive or repulsive force between two electrically charged objects.

magnetic force, attraction or repulsion that arises between electrically charged particles because of their motion.

a)  p₀ = 1.2 kg m / s

b) p_f = 1.2 kg m / s  

c)    [tex]v_{2f}[/tex] = 1.278 m/s

d)1.2482 =[tex]v_{2f}[/tex] cos θ

e)  0.2736 =[tex]v_{2f}[/tex]sin θ

g) θ = 12.36

Momentum is the product of the mass of a particle and its velocity. Momentum is a vector quantity; i.e., it has both magnitude and direction.

According to the question,

We define a system formed by the two balls, which are isolated and the forces during the collision are internal.

Hence , the momentum is conserved

a) The momentum of the system before the collision:

[tex]p_o = m v_1_0 + 0 p_o= 0.6 2 p_o = 1.2 kg m / s[/tex]

b) The momentum of the system after the collision, as the system is isolated, the momentum is conserved so

[tex]p_f = 1.2 kg m / s[/tex]

d. On X axis

[tex]p_ox[/tex] = 1.2 kg m / s

[tex]p_{fx}[/tex]= m v1f cos 20 + m v2f cos θ

[tex]p_o = p_f[/tex]

1.2 = 0.6 (-0.8) cos 20+ 0.6[tex]v_{2f}[/tex] cos θ

1.2482 =[tex]v_{2f}[/tex] cos θ

e. On Y axis  

[tex]p_{oy} = 0[/tex]

[tex]p_{fy}[/tex]= m[tex]v_{1f}[/tex]sin 20 + m[tex]v_{2f}[/tex]cos θ

0 = 0.6 (-0.8) sin 20 + 0.6 [tex]v_{2f}[/tex] sin θ

0.2736 =[tex]v_{2f}[/tex]sin θ

Here,

g. we write our system of equations

0.2736 =[tex]v_{2f}[/tex] sin θ

1.2482 = [tex]v_{2f}[/tex] cos θ

0.219 = tan θ (divide)

θ = tan⁻¹ 0.21919

θ = 12.36

c. Now To find the velocity

0.2736 = [tex]v_{2f}[/tex] sin θ

[tex]v_{2f}[/tex]= 0.2736 / sin 12.36

[tex]v_{2f}[/tex] = 1.278 m / s

Learn more about momentum here:

https://brainly.com/question/4956182

#SPJ1

The time period resulting in oscillations will be 1.986 seconds.

The period is the amount of time it takes for a particle to perform one full oscillation. T is the symbol for it. Taking the reciprocal of the frequency yields the frequency of the oscillation.

The time period of the oscillation is;

[tex]\rm T = 2 \pi\sqrt{\frac{L}{g}} \\\\ \rm T = 2 \times 3.14 \times \sqrt{ \frac{98.2 \ \times 10^{-2} \ m}{9.81 \ m/s^2}} \\\\ T= 1.986 \ sec[/tex]

Hence the time period resulting oscillations will be 1.986 seconds.

To learn more about the time period of oscillation refer to the link;

https://brainly.com/question/20070798

#SPJ1

Answer:current

Explanation:water flows down a river. Current flows down a wire (in the drude model, at least)

Answer:

electricity

Explanation:

(1) Our entire solar system orbits around the center of the Milky Way Galaxy about once every 230 million years.

(2) The milky way and andromeda galaxies are among a few dozen galaxies that make up our Local Group.

(3) The sun appears to rise and set in our sky because earth rotates once each day.

(4) You are one year older each time earth orbits about the sun.

(5) On average, galaxies are getting farther apart with time, which is why we say our universe is expanding.

(6) Our solar system is moving toward the star vega at about 70,000 km/hr.

Our entire solar system orbits around the center of the Milky Way Galaxy about once every 230 million years.

The milky way and andromeda galaxies are among a few dozen galaxies that make up our Local Group.

The sun appears to rise and set in our sky because earth rotates once each day.

You are one year older each time earth orbits about the sun.

On average, galaxies are getting farther apart with time, which is why we say our universe is expanding.

Our solar system is moving toward the star vega at about 70,000 km/hr.

Learn more about solar system here: https://brainly.com/question/1286910

#SPJ1

Answer:

During nuclear fission, a neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation. More neutrons are also released when a uranium atom splits. These neutrons continue to collide with other uranium atoms, and the process repeats itself over and over again.

Explanation:

In nuclear fission the nucleus of an atom breaks up into two lighter nuclei. The process may take place spontaneously in some cases or may be induced by the excitation of the nucleus with a variety of particles (e.g., neutrons, protons, deuterons, or alpha particles) or with electromagnetic radiation in the form of gamma rays. In the fission process, a large quantity of energy is released, radioactive products are formed, and several neutrons are emitted. These neutrons can induce fission in a nearby nucleus of fissionable material and release more neutrons that can repeat the sequence, causing a chain reaction in which a large number of nuclei undergo fission and an enormous amount of energy is released. If controlled in a nuclear reactor, such a chain reaction can provide power for society’s benefit. If uncontrolled, as in the case of the so-called atomic bomb, it can lead to an explosion of awesome destructive force.

Answer:

In nuclear fission, atoms are split apart, which releases energy. All nuclear power plants use nuclear fission, and most nuclear power plants use uranium atoms. During nuclear fission, a neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation.

Mira is much bigger than the Sun.

Only very massive stars will go through a supernova stage, causing the outer layer to explode away and the core to collapse in on itself, becoming very dense.

Answer:

[tex]\fbox {40 V}[/tex]

Explanation:

The formula we apply :

[tex]\boxed {Voltage = Current \times Resistance}[/tex]

At the point 2, current flowing will be 2A and resistance is 20Ω.

Solving :

V = 2 × 20

V = 40 V

Answer:

490N

Explanation:

W=m×g

W=50×9.8=490N

Answer:

Newtows first law of motion

Answer:

People with presbyopia require a convex lens for reading glasses; specialized preparations of convex lenses usually require the services of an optometrist

[tex]\textsf {a) As there is no change in the initial and final positions, the displacement is}\\\textsf {equal to 0.}[/tex]

b) Finding total distance :

Distance travelled from 0 s to 5 s :

Distance travelled from 5 s to 10 s :

Distance travelled from 10 s to 15 s :

Distance travelled from 15 s to 20 s :

Distance travelled from 20 s to 25 s :

Distance travelled from 25 s to 30 s :

Distance travelled from 30 s to 35 s :

Distance travelled from 35 s to 40 s :

Total = 75 + 150 + 162.5 + 190 + 237.5 + 225 + 150 + 50

Total = 1240 m

c) velocity at t = 15 s

d) average velocity

e) average speed

f) Part d uses displacement whereas part e uses distance

It is important to avoid an autoincrement primary key column in a many-to-many junction table.

A many-to-many junction table is a junction table which links multiple data in one table to multiple data in another table.

Generally in a many-to-many junction table, it is important to avoid an autoincrement primary key column.

Learn more about data in tables at: https://brainly.com/question/7144497

#SPJ12

A. The magnitude is 9.47N

B. The direction of the resultant force is 90°

We use vectors in answering this question.

F₁ = 2N     45°

F₂ = 5N     90°

F₃ = 4N.    135°

For the magnitude, we use vector addition twice

Consider forces F₁ and F₃

                       F₀ = 4.47N

Since F₁ and F₃ are at 45° and 135° respectively, their net force F₀ is at 90°, along the line of F₂

Fnet = F₀ + F₂ = 4.47 + 5 = 9.47N

A. The magnitude is 9.47N

B. The direction of the resultant force is 90°

Learn more about vectors here:

https://brainly.com/question/18660017

#SPJ10

The efficiency of a carnot engine is more when the temperature of the sink is increased by 50% is 33.33%

The efficiency is defined as the work done by the engine divided by the heat supplied.

Work done is the difference between the heat supplied and heat rejected.

So, efficiency η = 1 - T₁/T₂

Where T₁ is the lower temperature and T₂ is the higher temperature.

The temperature of the sink is increased by 50%. If the lower temperature is T₁, then the higher temperature will be 1.50T₁

Substitute the value into the expression , we get

η = 1 - T₁ / 1.5T₁ x 100 %

η = 33.33 %

Thus, the efficiency of the carnot engine is 33.33 %

Learn more about efficiency.

https://brainly.com/question/13828557

#SPJ1

The combined mass the quarters, given that the modern and old quarters has masses of 5.623 g and 6.24 g respectively is 11.863 g

The combine mass of the quarter can be obtained by simply adding the masses of the individual quarters together. This is illustrated below:

Combine mass = mass of modern + mass of old

Combine mass = 5.623 + 6.24

Combine mass = 11.863 g

Learn more about arithmetics:

https://brainly.com/question/453543

#SPJ1

Answer:

C.

Explanation:

Bioluminescence is the fascinating natural phenomenon by which living creatures produce light.

Based on the calculations, the amount of heat transferred is equal to 2,317 kJ.

Given the following data:

Volume of tank = 0.4 m³.

Initial pressure = 160 kPa.

Final pressure = 600 kPa.

Initial quality, x = 40% = 0.4

From the superheat table A-12, the specific volumes of the saturated liquid and vapor at 160 kPa are:

Next, we would determine the initial specific volume by using this formula:

V₁ = (1 - x)Vf + xVg

V₁ = (1 - 0.4)0.0007437 + (0.4)0.12348

V₁ = 0.049838 m³/kg.

Also, we would find the mass of this refrigerant at the initial state by using this equation:

m = V/V₁

m = 0.4/0.049838

Mass, m = 8.03 kg.

From the superheat table A-12, the internal energy of the saturated liquid and vapor at 160 kPa are:

At the initial state, we would find U₁ from the quality:

U₁ = (1 - x)Uf + xUg

U₁ = (1 - 0.4)31.09 + (0.4)221.35

U₁ = 107.19 kJ/kg.

From the superheat table A-13, the final specific volume and internal energy of the saturated liquid and vapor at 600 kPa are:

At the final state, we would find U₂ by extrapolating with the last two points in the table:

[tex]U_2 = 357.96 + (\frac{367.81 \; - \; 357.96}{0.057006\;-\;0.055522}) \times (0.049838\;-\;0.055522)\\\\U_2 = 357.96 + (\frac{9.85}{0.001484}) \times (-0.005684)\\\\U_2 = 357.96 + 37.73\\\\[/tex]

U₂ = 395.69 kJ/kg.

Now, we can calculate the amount of heat transferred:

Q = m(U₂ - U₁)

Q = 8.03(395.69 - 107.19)

Q = 8.03(288.5)

Q = 2,316.66 ≈ 2,317 kJ.

Read more on heat transfer here: https://brainly.com/question/14814826

#SPJ1

Answer:

C

Explanation:

First the water heats up to the boiling point ( temp increases)

  then, as it boils it remains at constant temp ( boiling point)

The temperature of water changes when it is heated as it increases first and then remains constant. So, option C is correct.

When a liquid is heated to its boiling point, the temperature at which the vapor pressure of the liquid equals the pressure that the surrounding environment exerts on the liquid, boiling is the fast vaporization of the liquid that takes place.

Boiling can be divided into two primary categories: nucleate boiling, in which tiny bubbles of vapor develop at specific locations, and critical heat flux boiling, in which the boiling surface is heated above a critical temperature and a film of vapor forms on the surface. Transition boiling is an unstable, transitional kind of boiling that contains both sorts of components. Due to the decreased air pressure found at higher elevations, water's boiling point, which is 100 °C or 212 °F, is lower.

To get more information about boiling :

https://brainly.com/question/1416592

#SPJ5

25.1 grams are still present after 8.1 days. When the Gold-198 has a half-life of 2.7 days.

The act of producing radiation spontaneously is known as radioactivity. This is accomplished by an unstable atomic nucleus that wants to give up some energy in order to move to a more stable form.

The half-life of the gold  =2.7 days

Sample size  = 200 grams

N is the left amount after the given time =?

Constant of rate = 0.26

The rate constant is found as;

[tex]\rm \lambda = \frac{0.693}{t^{\frac{1}{2}}} \\\\ \lambda = 0.256 \ days^{-1}[/tex]

The amount after the given time;

[tex]\rm N=N_0 \times e^{-\lambda t} \\\\\ N = 200 \times e^{-0.256 \times 8.1 \ days} \\\\N=25.1 \ gm[/tex]

Hence,25.1 grams are still present after 8.1 days.

To learn more about the radioactivity, refer  to the link;

https://brainly.com/question/1770619

#SPJ1

Answer: See below

Explanation:

a) Using Newton's 2nd Law, rearranging and solving for acceleration

[tex]a &= \frac{F}{m}\\ &= \frac{25\ \text{N}}{0.5\ \text{kg}}\\ &= \boxed{50\ \text{m/s}^2}[/tex]

b) Using the acceleration 50 m/s^2 and the initial velocity v = 0 (since the object starts from rest), the final velocity at t = 20, v can be determined using a suitable equation as follows:

[tex]v &= u+ at\\ &= 0+ 50\ \text{m/s}^2(20\ \text{s})\\ &= \boxed{100\ \text{m/s}}[/tex]

c) To determine the distance s traveled in the 20 seconds, we'll use a suitable equation:

[tex]s &= ut+\frac{1}{2}at^2\\ &= 0+\frac{1}{2}(50 \text{m/s}^2)(20\ \text{s})^2\\ &= \boxed{10\ 000\ \text{m}}[/tex]

243 rad is the angle through which the wheel turns during this time.

Torque is a measure of the force that can cause an object to rotate about an axis.

Angular speed is define as  the measuring angle of rotation over a given amount of time.

Mathematically , ω = θ t

From the given question ,

Torque = 19.8 rad/s

ω = 23.5 rad/s

t = 11.2 s

We get the equation,

[tex]\frac{ 19.8 +23.5}{2} * 11.2[/tex]

= 243 rad

Learn more about Angular momentum here:

https://brainly.com/question/15104254

#SPJ1

Answer:

A) only the wall is involved for both forces (action-reaction)

alpha < beta < gamma.

Gamma rays are parts of electromagnetic spectrum.

1. Gamma rays  travel with the speed of light with maximum velocity.

2. Gamma rays do not have mass have maximum penetrating power.

Beta rays are negatively charged and have negligible mass.

1. Neutron is divided into proton and electron on emission of beta particles.

2 .Beta particles have less mass and very high velocity, so their penetrating power is more than alpha particles.

Alpha rays  are positively charged it contain high energy Helium nucleus with 2 proton and 2 neutron.

1. Mass of Alpha rays are 4u

2. Alpha rays are heavier and maximum charged than beta and gamma particles.

3.Alpha particles have least penetration power it can't travel more than 10-18 cm.

Learn more about alpha , beta , gamma on:https://brainly.com/question/11492280

#SPJ1

The incandescent lamp will glow quite brightly  in the eyes of the creature because emits less visible light and more infrared light.

The infrared light is a part of the electromagnetic spectrum that is emitted by a hot object.

As such, the incandescent lamp will glow quite brightly  in the eyes of the creature because emits less visible light and more infrared light. The florescent light which does not produce inferred rays will not be visible at all.

Learn more about infrared light:https://brainly.com/question/7071188

#SPJ1

.Internal energy is the total potential and kinetic energies in a substance, and thermal energy is the part of internal energy that can be transferred to another substance. Thus, option "C" is correct.

Thermal energy, is internal energy present in a system in a form of thermodynamic equilibrium probity by its temperature.

Thermal energy cannot be transformed to useful work as easily as the energy of systems that are not in conditions of thermodynamic equilibrium.

Thus, option "C" is correct

To learn more about  thermal energy click here:

https://brainly.com/question/3022807

#SPJ1