C2H5Br(alc) + OH ‾(alc) → C2H5OH(l) + Br‾(alc)
The rate of disappearance of ethyl bromide change if the solution were diluted by adding an equal volume of pure ethyl alcohol to the solution 1/4 the rate.
The liquid ether-like substance known as ethyl bromide is colourless, flammable, and has a burning flavour. On coming into contact with air and light, it turns yellowish. It can be found in gasoline and is utilised as a fumigant, solvent, and refrigerant.
Ethyl alcohol is the end product of the susbtitution reaction that occurs when ethyl bromide interacts with wet Ag2O. Methyl bromide is extremely poisonous. According to human studies, acute (short-term) methyl bromide inhalation can cause serious damage to the lungs.
Methyl bromide inhalation in humans can have neurological consequences both immediately after exposure and over time. Animal reports of neurological consequences have also been made.
Learn more about ethyl bromide:
https://brainly.com/question/14860705
#SPJ4
what a substance was dissolved in water, the temperature of the water increases. this process is described as
This process is described as exothermic, with the release of energy.
Temperature is a bodily amount that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have trusted diverse reference points and thermometric substances for definition.
Temperature performs a essential function in hospital treatment (each human beings and animals), meals, liquids, and agriculture. Our common health is frequently reliant upon temperature in many approaches as nicely. Retaining right temperature levels in clinical bloodless garage areas is vital.
Air temperature is measured by thermometers. Not unusual thermometers encompass a pitcher rod with a completely skinny tube in it. The tube contains a liquid this is furnished from a reservoir, or "bulb," at the base of the thermometer.
Learn more about Temperature here:-https://brainly.com/question/26866637
#SPJ4
Help me out asp please
in a mixture of gases with a total pressure of 15.0 bar, oxygen has a mole fraction of 0.41. what is the partial pressure of oxygen?
The partial pressure of oxygen would be 6.15 bar in a mixture of gases with total pressure of 15 bar, having oxygen the mole fraction of 0.41.
What is mole fraction and partial pressure and how the partial pressure comes out to be 6.15?Mole fraction is the ratio of number of components in one compartment to the total number of components present in a solution.Partial pressure is the individual pressure of a molecule in a mixture of molecules in a container.Here is given the total pressure that is P = 15 bar, and the mole fraction of oxygen that is X = 0.41.As we know the partial pressure of any gas can be calculated by multiplying the total pressure with mole fraction.15 bar x 0.41 = 6.15 partial pressure of O2, hence the partial pressure of oxygen in a mixture of gases would be 6.15 bar.To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ4
the molar solubility of manganese(ii) carbonate is 4.2 x 10-6 mol/l. what is the solubility product constant, ksp for manganese(ii) carbonate?
The molar solubility of manganese(ii) carbonate is 4.2 x 10-6 mol/l. what is the solubility product constant, ksp for manganese(ii) carbonate is 17.64 × 10⁻¹².
What is molar solubility?Molar solubility (M) is a unit of measurement for a compound's capacity to dissolve in a particular liquid, also known as a solvent. Molar solubility is measured in terms of moles/L since it is the most moles of a solute that can dissolve in one liter of solvent. The solution is said to be saturated when it can no longer dissolve any more solute and the number of moles dissolved in a liter of solvent equals the molar solubility.
The ionization equation for MNCO₃ is given as:
MnCO₃ → Mn²⁺ + CO₃²⁻
Ksp=[Mn²⁺][CO₃²⁻]
From chemical reaction 1 moles of manganese and carbon reacts
than, molar solubility of MnCO₃ = 4.2 × 10⁻⁶ M
4.2 × 10⁻⁶moles of [Mn²⁺] reacts,
than it also reacts with 4.2 × 10⁻⁶ M of CO₃
Thus,
Ksp = (4.2 × 10⁻⁶) x (4.2 × 10⁻⁶)
Ksp = 17.64 × 10⁽⁻⁶⁺⁽⁻⁶⁾⁾
Ksp = 17.64 × 10⁻¹²
To know more about molar solubility, visit:
https://brainly.com/question/28170449
#SPJ4
Compare and contrast what three elements do all macromolecules share? explain how the chemical properties of lipids, nucleic acids, and proteins differ from carbohydrates.
Both the hydrogen and carbon atoms are present in every macromolecule.
How do macromolecules work?The molecules made up of smaller units are referred to as macromolecules. They are referred to as monomers. The macromolecules that are relevant to this discussion are those that may be present in the human body.
As we can see, biological macromolecules are frequently quite big. This is due to the fact that macromolecules often consist of a large number of units linked together. To create the macromolecules of proteins, lipids, carbohydrates, and nucleic acids, thousands of monomer molecules are bonded together.
The carbon atom and the hydrogen atom are present in every macromolecule. These are present in every macromolecule. The carbonyl bond is present because the carbs are lowering sugars. Lipids, nucleic acids, proteins, and amino acids do not undergo carbonyl reduction processes because they do not contain a carbonyl group.
To know more about macromolecules visit:
https://brainly.com/question/28488020
#SPJ4
a 25.0 ml aliquot of an aqueous quinine solution was diluted to 50.0 ml and found to have an absorbance of 0.528 at 348 nm when measured in a 1.00 cm cell. a second 25.0 ml aliquot was spiked with 10.00 ml of a 23.4 ppm quinine standard. after dilution to 50.0 ml, this solution had an absorbance of 0.610 at 348 nm in the same 1.00 cm cell. calculate the concentration of quinine in the sample in ppm.
The concentration of quinine in the sample is 60.26 ppm.
This problem can be calculated as:
The volume of aqueous quinine solution: V1 = 25 ml
Volume of this sol. after dilution: V2 = 50 ml
Absorbance of this solution: A1: .528
The volume of another quinine solution: V2: 25 ml
Volume of this solution mixed: V3: 10 ml
Concentration of quinine in this sample: C2 : 23.4 ppm
volume of this solution after dilution: 50 ml =Vd
absorbance of this solution: A2: .610
Using formula:
C = (A1* C2*V3)/(A2-A1)*V2
C = 60.26 ppm
To know more about this problem, click here,
brainly.com/question/17373797
#SPJ4
which of the following compounds do you anticipate would have the longest bond? a) h-f b) h-cl c) h-br d) h-i
The following compounds do anticipate would have the longest bond is H - I.
The given compounds are the halogen halides. if we move down the group the electronegativity decreases and the bond becomes weaker. H - F is the strongest in all the given hydrogen halides. If the bond length is shorter the bond is much much stronger. The bond length is longest this means the bond is weaker.
bond length ∝ 1 / bond order
bond length ∝ stable
so, the weaker the bond , the longest the bond length.
Thus, The following compounds do anticipate would have the longest bond is H - I.
To learn more about bond here
https://brainly.com/question/940658
#SPJ4
Why is it important for the surface area-to-volume-ratio of exchange surfaces to be maximized?.
It important for the surface area-to-volume-ratio of exchange surfaces to be maximized because it provides more space for the diffusion of gases.
Explain Adaptations of exchange surfaces?In order to breathe, organisms must take in oxygen and expel carbon dioxide from their bodies. Since these gases spread across exchange surfaces like the lungs, exchange surfaces are modified to maximize diffusion.
A short diffusion pathway across the exchange surface is ensured by the fact that the majority of gas exchange surfaces are incredibly thin (sometimes only one cell thick). Additionally, they will have a high surface area to volume ratio, which creates greater room for gas diffusion.
Additionally, the organism will have characteristics that maximize the differential in gas concentration across the exchange surface.
To know more about exchange surface, visit:
https://brainly.com/question/14214269
#SPJ4
The element Chromium has 4 naturally occurring isotopes. Use the relative abundance of each to calculate the average atomic mass of chromium. (Must show work!)
Cr-50 = 4.34%, Cr-52 = 83.79%, Cr-53 = 9.50%, Cr-54 = 2.37%
According to the given statement The average Cr atomic mass unit is 51.9963 amu.
What defines the atomic mass?A single atom's atomic mass is only its total mass, and it is usually given in atomic mass units, or amu. A carbon atom with six neutrons, or helping students learn, has an atomic mass of Twelve amu by definition.
Do elements have atomic mass?The entire weight of one atom in an element is referred to as its atomic mass. The atomic mass is its average atomic mass given in atomic mass units (amu, also known as daltons, D). Atomic weight is another name for the atomic number.
Briefing:Chromium exists in four isotopes that are naturally occurring: 50Cr (atomic mass: 49.9460 amu), 52Cr (atomic mass: 51.9405 amu), 53Cr (atomic mass: 52.9407 amu), and 54Cr (atomic mass: 2.37% amu).
To know more about Atomic mass visit:
https://brainly.com/question/5566317
#SPJ1
Which clue can be used to identify a chemical reaction as a combustion reaction oxygen is a product?.
According to the claim, the reactant oxygen can be utilized to determine if a chemical reaction is a combustion reaction.
What else do you call a speedy reaction?Appropriate, speedy, and prepared are some typical synonyms for timely. All of these phrases refer to being "able to reply without delay without hesitation or suggestive of such capacity," but prompt is so much more likely to imply that one has had the necessary training and discipline to be able to respond immediately.
A physical reaction is what?A physical response is a reaction that modifies the physical characteristics of an item or material Physical characteristics include things like mass, volume, and density.
To know more about reaction visit:
https://brainly.com/question/17096236
#SPJ4
A 2. 26 l balloon of helium is at 30°c and 1. 61 atm, what is the pressure if the volume is increased to 4. 12 l?.
Answer:
0.8832 atm
Explanation:
Per Boyle's Law:
If the temperature is held constant, the volume of a fixed amount of gas is inversely proportional to its pressure:
V∝[tex]\frac{1}{P}[/tex]
and
[tex]P_1V_1=P_2V_2[/tex]
To find pressure resulting from a change in volume:
[tex]\frac{P_1V_1}{V_2}=P_2[/tex]
So:
[tex]P_1=1.61atm\\V_1=2.26L\\V_2=4.12L\\P_2=\frac{(1.61atm)(2.26L)}{4.12L}\\P_2=0.8832atm[/tex]
This answer makes sense because Boyle's Law states that a given volume of gas at a constant temperature should have a proportionally lower pressure as the volume is increased.
What quantity of heat is required to raise the temperature of 450 grams of water from 15°C to 85°C? The specific heat capacity of water is 4.18 J/g °C.
0.0000121 J
132,000 J
0.0000152 J
152,000 J
Quantity of heat is required to raise the temperature of 450 grams of water from 15°C to 85°C, specific heat capacity of water is 4.18 J/g °C is 132000 J.
The expression for the specific heat capacity is given as :
Q = mc ΔT
where,
mass , m= 450 g
specific heat, c = 4.18 J/g °C
ΔT = 85 °C - 15 °C = 70 °C
Q = 450 ×4.18 × 70
Q = 132000 J
Thus, Quantity of heat is required to raise the temperature of 450 grams of water from 15°C to 85°C, specific heat capacity of water is 4.18 J/g °C is 132000 J.
To learn more about specific heat capacity here
https://brainly.com/question/11297584
#SPJ1
The most common isotope of uranium has an atomic number of 92 and mass number of 238. If a uranium atom alpha decays and emits a helium nucleus, what will the atomic number of the daughter nucleus be?.
The most common isotope of uranium has an atomic number of 92 and mass number of 238. If a uranium atom alpha decays and emits a helium nucleus the atomic number of the daughter nucleus be is 234
Isotopes are the member of family of an element that all have the same number of proton but different number of neutron and the nucleus of uranium 238 decay by alpha emission to form a daughter nucleus and the thorium 234 this thorium in turn transform into protactinium 234 and then undergo beta negative decay to produce uranium 234
And uranium 238 undergoes alpha decay to become thorium 234 and in this reaction uranium 238 loses two proton and two neutron to become the element thorium 234
Know more about uranium
https://brainly.com/question/14503524
#SPJ4
The field of chemistry had incredible advancements in a very short time period, from the mid-1800s to the early 1900s. It was during this time period that the scientific community saw the need for the regulation of the growing number of chemical discoveries. What were the early committees trying to regulate?.
Earlier the committees were trying to regulate the naming of the discovered elements.
The elements, their properties, and other information relating to them were so chaotic prior to the regulations being applied to the area of chemistry that it was slowing down advancement.
Therefore, in order to be used more effectively, the committees decided to govern things like the names of any newly found elements and whatever attributes they may have.
To know more about, elements, click here,
brainly.com/question/12781141
#SPJ4
a balloon is filled with co2 at 1.0 atm. if the balloon is placed at the bottom of the pool of water where the pressure is 2.0 atm, what will happen to the volume?
If the balloon is placed at the bottom of pool of water where pressure is 2.0 atmospheres, the volume of carbon dioxide in balloon will decrease as pressure and volume are inversely proportional.
What is pressure?Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.
There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .
It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.
Learn more about pressure,here:
https://brainly.com/question/18107358
#SPJ1
in a solution that is 90% ethyl alcohol and 10% water, the solute is and the solvent is . g
In a solution that is 90% ethyl alcohol and 10% water, the solute is 10 g and the solvent is 90 g.
given that :
The solute in the solution by mass percent = 10 %
mass percent = ( mass of solute / mass of solution ) × 100%
mass of solute in the solution is = 10 g
The solvent present in solution by mass percent = 90 %
the mass of solvent in the solution is is 90 g
Thus, In a solution that is 90% ethyl alcohol and 10% water, the solute is 10 g and the solvent is 90 g.
To learn more about solute and solvent here
https://brainly.com/question/7932885
#SPJ4
if a weather report gives the atmospheric pressure as 31.5 in. of mercury, what is the pressure in kpa? (1 in.
The pressure of the atmosphere according to the weather report is Kpa is 4851.568 Kpa.
The weather report give the atmospheric pressure to be 31.5 in of mercury.
Converting 31.5 inch into cm,
The height of mercury column is 80.01 cm.
We know, the pressure given by the mercury column is given by,
P = pgH
Where,
p is the density of mercury,
g is the acceleration due to gravity,
H is the height of the mercury column.
So, putting values,
P = 80.01 x 136000 x 80.01/100
P = 4851568 pa.
So, the pressure of the atmosphere according to the weather report is 4851.568 Kpa.
To know more about pressure, visit,
https://brainly.com/question/28012687
#SPJ4
Electrolytes help control fluid balance via __________, the movement of water through a semipermeable membrane based on solute concentration.
Electrolytes help control fluid balance via osmosis , the movement of water through a semipermeable membrane based on solute concentration.
What is osmosis?Osmosis is the spontaneous diffusion or flow of water or other solvents over a semipermeable membrane (one that prevents the passage of solutes, or dissolved compounds). German plant physiologist Wilhelm Pfeffer conducted the first in-depth study of the crucial biological process in 1877. Prior researchers had conducted less precise examinations of leaky membranes (such as animal bladders) and the transport of water and escape chemicals through them in opposite directions.
Thomas Graham, a British scientist, coined the broad term osmose (now osmosis) in 1854. The solution will tend to become more diluted by absorbing solvent through the membrane if it is separated from the pure solvent by a membrane that is permeable to the solvent but not the solute.
To know more about osmosis, visit:
https://brainly.com/question/1799974
#SPJ4
What is the estimated effective nuclear charge, zeff, experienced by an electron in a 3p orbital of a chlorine atom?.
The estimated effective nuclear charge experienced by a 3 p electron of chlorine is 6.1.
It is the charge felt by any many-electron atom's outermost valence electrons. This is accomplished by taking into account the quantity of shielding electrons surrounding the nucleus.
It is used to assess the actual nuclear charge that an electron in a multi-electron atom experiences. This rule states that an electron's actual nuclear charge is less than its actual nuclear charge because of screening by other electrons in the atom.
The arrangement of an atom's electrons in its atomic orbitals is known as its electronic configuration. J. J. Thompson made the discovery of the electron. J. J. Thompson made the electron discovery in 1887. Every atom consists of a hefty nucleus that is encircled by electrons.
Learn more about electron:
https://brainly.com/question/26084288
#SPJ4
an unknown ideal gas is found to have a density of 3.16 g/l at stp. what could the gas be? molar masses are listed after each gas.
Pentane is a gas with a molar mass of 70.0 g/mol. At STP, a mole of a gas takes up 22.4 L of space. At STP, the gas has a density of 1.43 g/L. Gas in 22.4 L has a mass of 1.43 g/L22.
The Greek letter rho, or, is used to represent it. The temperature and pressure of the air affect the density of the air, or how light it is. The density of air is typically expressed as STP (standard temperature and pressure). One atmosphere of pressure at absolute zero is known as STP. Only links in the afflicted VLAN are impacted when the spanning tree failure is contained to a single VLAN.
Learn more about temperature here-
https://brainly.com/question/13294753
#SPJ4
The molar mass of the particular gas is equal to 70.8grams /mole
The equation for the Ideal Gas Law is:
PV=nRT
where;
P is the pressure of the particular gas in atm
V is the volume in liters
n is the number of moles of the particular gas
R is a gas constant (0.082056 L-atm/mol-K)
T is the temperature in Kelvin
We can perform modification or rearrangement to the equation to equate density of the gas to its molar mass.
PV=nRT
PV=(mass/Molar mass)RT
Molar mass=(mass)×RT/PV
where mass over volume (m/V) is equal to density
The equation will become:
Molar mass=density ×RT/P
We can now substitute the given values to determine the molar mass of the particular gas. The temperature at STP condition is equal to 273.15 K while the pressure is equal to 1 atm.
Molar mass=density ×RT/P
Molar mass=(3.16×grams/L)×(0.082056×273.15)/(1atm)
Molar mass=70.8grams/mole
to know more about Molar mass click
https://brainly.in/question/48308900
#1234
Calcium phosphate is widely found in nature in the form of natural minerals. It is also found in bones and some kidney stones. In one case a sample is found to contain 0.256 moles of phosphorus. How many moles of Ca3(PO4)2 are in that sample?
Answer:
There are 1.024 moles of Ca3(PO4)2 in the sample.
Explanation:
What character would be the best example of an archetype 1. 1 3?.
We all come across archetypes, which are recurring patterns, images, or feelings. Because archetypes do not physically manifest themselves, they appear to be more intellectual than physical.
It's similar to the account of God appearing to Moses, but only allowing Moses to view a portion of him since "no one may see me and survive" . They do, however, appear as "archetypal images" and recurring themes in consciousness. They act as influences that combine psychic materials into recognizable visuals. For instance, the stereotype of the Wicked Stepmother — You know what she looks like, at least to you, even if I haven't given a description. That mental picture you have is an archetypal picture. Even though I'm not making any specific suggestions, you can comprehend not only how she looks but also her psychic impact.
Even if you have never had a stepmother, the wicked stepmother in Cinderella resonates because of the Wicked Stepmother archetype.
To know more about archetype please refer:
https://brainly.com/question/1855370
#SPJ4,
Draw the lewis structure (including resonance structures) for methyl azide (ch3n3).
While the N atom coupled to just one (1) Nitrogen atom has a - formal charge, the N atom bound to two (2) Nitrogen atoms has a + formal charge.
How is a Lewis structure composed?Determine the total number of valence electrons in step 1. Write down the molecule's skeleton in step two. In the third step, each bond in the skeleton structure is formed using two valence electrons. Step 4: Make an effort to fill the atoms' octets by assigning the leftover valence electrons to nonbonding positions.
CH₃N₃ typically has two resonance configurations.
The N atom has a + formal charge when it is bound to two Nitrogen atoms, whereas it has a - formal charge when it is connected to only one Nitrogen atom in both forms.
To know more about Lewis structure visit:
https://brainly.com/question/12318888
#SPJ4
why are the bakelite phenol molecules substitutes only at the ortho and para positions and the meta positions
The bakelite phenol molecules substitute only at the ortho and para positions because the substituents are ortho para direction.
Bakelite is formed from the response of phenol and formaldehyde. essentially, it's far shaped in two steps. within the first step, formaldehyde reacts with phenol and produces o-Hydroxymethyl phenol. Then o-Hydroxy methyl phenol and phenol come collectively and shape Bakelite.
Polyoxybenzylmethylenglycolanhydride, higher known as Bakelite is a thermosetting phenol formaldehyde resin, fashioned from a condensation response of phenol with formaldehyde.
Bakelite is obtained by the condensation reaction of phenol and formaldehyde. it's miles utilized in making electrical switches and switchboards. it is a thermosetting polymer due to the fact on heating it undergoes full-size cross-linking inside the mold.
Learn more about formaldehyde here:-https://brainly.com/question/28366450
#SPJ4
Which of the following can contain more than two valence electrons in its outer most shell?
O Helium
O Hydrogen
O Zinc
O Oxygen
the largest magnetic quantum number (m or ml) of an atom in the ground state is found to be 6. what must be the largest principal quantum number (n)?
The magnetic quantum number (m or ml) of an atom in the ground state is found to be 6. The largest principal quantum number of that atom is 4.
The magnetic quantum number(ml) of an atom determines the number of orbitals and the orientation present in the atom. To find out principal quantum number, first we need to find out the angular quantum number, which is l. It is calculated by the formula
m or ml=(2l+1)
The value of ml is 6. Plug the value in the formula
6=(2l+1)
2l=6-1
2l=5
l=5/2
If we round off this value to the nearest integer, then the value is 6/2 which is equal to 3.
When l=3, then the value of principal quantum number is calculated using the formula
l=n-1
Rearrange the formula for n and solve for n
n=l+1
n=3+1
n=4
Hence, the value of n is 4.
Therefore, the largest principal quantum number of the atom is 4.
To know more about quantum numbers
https://brainly.com/question/16977590
#SPJ1
a solution of enzyme a has a ph of 888. based on the graph, which ph change would result in higher enzyme activity?
A solution of enzyme a has a pH of 8. based on the graph, pH change would result in higher enzyme activity is by decreasing the pH value to 6.
The enzymes are also called as protein. the very low pH and the very high pH lead to decrease the enzyme activity. At optimal pH value the enzyme activity is at higher. The optimal temperature reference range id from 4 to 6 called as optimal pH at the optimal pH enzyme would result in higher activity.
Thus, A solution of enzyme a has a pH of 8. based on the graph, pH change would result in higher enzyme activity is by decreasing the pH value to 6.
To learn more about pH here
https://brainly.com/question/15289741
#SPJ4
If you were to combine two carbon-12 atoms in a fusion process, what element would you get?.
If you were to combine two carbon-12 atoms in a fusion process then Mg element would you get
Carbon 12 is the particular importance in its use as the standard from which atomic mases of all nuclide are measured and its atomic mass is exactly 12 Dalton by its definition and carbon 12 is composed of 6 proton and 6 neutron and 6 electron and magnesium 24 nucleus has same nucleon as two carbon 12 nuclei and the reaction is therefore a fusion of two carbon 12 nuclei and the no other particles are produced
Know more about fusion
https://brainly.com/question/20240443
#SPJ1
what number of moles of o2 is needed to produce 14.2 grams how many carbon atoms are contained in 2.8 g of c2h4 ? p4o10 from p? (molecular weight p4o10
0.250 moles of o2 is needed .
What is moles?
A mole is merely a measuring unit. In reality, it is one of the International System of Units' seven foundation units (SI). When existing units are insufficient, new units are created. Chemical reactions frequently occur at levels where using grammes would be inappropriate, but using absolute numbers of atoms/molecules/ions would also be misleading. As a result, scientists devised the mole to bridge the gap between extremely small and extremely huge numbers.
In the International System of Units, the mole (sign mol) is the unit of material amount. The amount of substance is a measurement of how many elementary entities of a certain substance are present in an object or sample. The mole is defined as having 6.022140761023 elementary entities.
The number of moles of
P4O10
can be obtained by dividing the given mass by the molecular weight of the compound:
mol P4O10=14.2
g×mol284g=0.05mol
The balanced chemical equation is:
P4+5O2→P4O10mol
O2=0.05
molP4O10× mol
O21 mol
P4O10=0.25 mol
0.250 moles of o2 is needed
Learn more about moles from given link
https://brainly.com/question/15356425
#SPJ4
How many o2 molecules are required for two glucose molecules to undergo cellular respiration.
Two glucose molecules would require 12O₂ molecules to go through cellular respiration.
What is cellular respiration?Through a sequence of chemical processes called cellular respiration, glucose is broken down to create ATP, which may then be used as an energy source for a variety of bodily functions. The citric acid cycle, oxidative phosphorylation, and glycolysis are the three primary phases of cellular respiration.
Let's first examine the respiration equation in
C₆H₁₂O₆+6O₂ → 6CO₂+ 6H₂O
According to the equation, the reaction requires 6 moles of oxygen for every mole of glucose.
6 x 2 = 12 moles of oxygen will be needed to provide 2 glucose molecules.
To know more about cellular respiration visit:
https://brainly.com/question/19269610
#SPJ4
