I NEED HELP PLEASE HELP ME

Answer:

1096750 impressions

Step-by-step explanation:

Given that :

Mean = 850,000

Standard deviation = 150,000

If we assume that X should be the numbers of impressions created;

Then ;

[tex]X \approx N (\mu , \sigma^2)[/tex]

Now ; representing x as the value for the number of impression needed ; Then ;

[tex]P(X>x) = 0.95[/tex]

[tex]P(\dfrac{X- \mu}{\sigma} > \dfrac{x -850000}{150000}) = 0.95[/tex]

[tex]P(Z> \dfrac{ x -850000}{150000}) = 0.95[/tex]

From normal tables:

[tex]P(Z >1.645) = 0.95[/tex]

[tex]\dfrac{x - 850000}{150000} =1.645[/tex]

(x- 850000) = 1.645(150000)

x - 850000 = 246750

x = 246750 + 850000

x = 1096750 impressions

The volume of any cylinder is

V = pi*r^2*h

where r is the radius and h is the height. We are keeping r = 2 the same the entire time, as the first part of the instructions indicate. In contrast, h is allowed to vary or change based on the values shown in the table.

If h = 1, then,

V = pi*r^2*h

V = pi*2^2*1

V = pi*4

V = 4pi

So you'll write "4pi", without quotes of course, in the V column next to h = 1. This first row shows a height of 1 leads to a volume of 4pi.

-------------

Then if h = 2, we have,

V = pi*r^2*h

V = pi*2^2*2

V = pi*8

V = 8pi  ... this is written in the second box

and finally if h = 3, we would say,

V = pi*r^2*h

V = pi*2^2*3

V = pi*12

V = 12pi .... and this is placed in the third box

---------------

The values of V we got were: 4pi, 8pi, 12pi

This is for h = 1,2 and 3 respectively in that order.

The sequence 4,8,12 is linear because we are adding 4 each time. More specifically, it fits the equation y = 4x where x = 1,2,3. Think of y = 4x as y = 4x+0 and that fits the slope intercept form y = mx+b.

Answer:

A sample size of at least 531 is required.

Step-by-step explanation:

We are lacking the confidence level to solve this question, so i am going to use a 90% confidence level.

We have that to find our [tex]\alpha[/tex] level, that is the subtraction of 1 by the confidence interval divided by 2. So:

[tex]\alpha = \frac{1-0.9}{2} = 0.05[/tex]

Now, we have to find z in the Ztable as such z has a pvalue of [tex]1-\alpha[/tex].

So it is z with a pvalue of [tex]1-0.05 = 0.95[/tex], so [tex]z = 1.645[/tex]

Now, find the margin of error M as such

[tex]M = z*\frac{\sigma}{\sqrt{n}}[/tex]

In which [tex]\sigma[/tex] is the standard deviation of the population and n is the size of the sample.

Find the required sample size for the new study.

A sample size of at least n is required.

n is found when [tex]M = 0.05[/tex]

We have that [tex]\sigma = 0.7[/tex]

So

[tex]M = z*\frac{\sigma}{\sqrt{n}}[/tex]

[tex]0.05 = 1.645*\frac{0.7}{\sqrt{n}}[/tex]

[tex]0.05\sqrt{n} = 1.645*0.7[/tex]

[tex]\sqrt{n} = \frac{1.645*0.7}{0.05}[/tex]

[tex](\sqrt{n})^{2} = (\frac{1.645*0.7}{0.05})^{2}[/tex]

[tex]n = 530.4[/tex]

Rounding up

A sample size of at least 531 is required.

Answer:

The probability is 0.31

Step-by-step explanation:

To find the probability, we will consider the following approach. Given a particular outcome, and considering that each outcome is equally likely, we can calculate the probability by simply counting the number of ways we get the desired outcome and divide it by the total number of outcomes.

In this case, the event of interest is  choosing 3 laser printers and 3 inkjets. At first, we have a total of 25 printers and we will be choosing 6 printers at random. The total number of ways in which we can choose 6 elements out of 25 is [tex]\binom{25}{6}[/tex], where [tex]\binom{n}{k} = \frac{n!}{(n-k)!k!}[/tex]. We have that [tex]\binom{25}{6} = 177100[/tex]

Now, we will calculate the number of ways to which we obtain the desired event. We will be choosing 3 laser printers and 3 inkjets. So the total number of ways this can happen is the multiplication of the number of ways we can choose 3 printers out of 10 (for the laser printers) times the number of ways of choosing 3 printers out of 15 (for the inkjets). So, in this case, the event can be obtained in [tex]\binom{10}{3}\cdot \binom{15}{3} = 54600[/tex]

So the probability of having 3 laser printers and 3 inkjets is given by

[tex] \frac{54600}{177100} = \frac{78}{253} = 0.31[/tex]

Answer:

D.

Step-by-step explanation:

It's a right triangle so

[tex]x^2=40^2+9^2[/tex]

x = 41

Answer:

By plotting the graph of f(x)=lnx, you can conclude that when x is small, dy/dx has a larger value. For instance, the gradient of the curve when x=0.5 is 2. However, as you move along the x axis, you will see that the graph levels off, indicating a decrease in the slope, or dy/dx. For example, if x=10, dy/dx = 0.1 and when x=20, dy/dx= 0.05 and so on. Eventually, when x is large enough the value of dy/dx will be negligible.

Thus, as x increases, the slope decreases.

Answer:

Explanation shown below

Step-by-step explanation:

f(x)=lnx;

The rate of change is defined as dy/dx;

dy/dx[Inx] = 1/x

and dy/dx is defined as the slope

The nature of the slope is as x increases ; the slope decreases and conversely meaning as x decreases, the slope increases.

Answer:

2nd option is the correct answer

Step-by-step explanation:

3 times a number decreased by 6 is - 2

Answer:

13 mins

Step-by-step explanation:

8.03- 1.85= 6.18

-.72=5.46

/.42=13

Answer:

Cost of tiling the floor of the restaurant = $346.5

Step-by-step explanation:

Since Mario's restaurant is in the shape of a composite figure.

Area of the composite figure = Area of the rectangle + Area of trapezoid

Area of the rectangle = 3 × 9

                                    = 27 square feet

Area of the trapezoid = [tex]\frac{1}{2}(b_{1}+b_{2}).h[/tex]

Here [tex]b_{1}[/tex] and [tex]b_{2}[/tex] are the parallel sides of the trapezoid and 'h' is the distance between these sides.

Area of the trapezoid = [tex]\frac{1}{2}[12+(31-9)]\times 12[/tex]

                                    = 17 × 12

                                    = 204 square feet

Total area of the floor = 27 + 204

                                     = 231 square feet

Cost of the tiles = $1.5 per square feet

Total Cost of tiling the floor of Mario's restaurant will be,

= per square feet cost × Area of the floor

= 1.50 × 231

= $346.5

Answer:

THE ANSWER IS .B  346.50

Step-by-step explanation:

Answer:

For ease of writing, θ [tex]=x[/tex]

[tex]sin(x)=\frac{1}{\sqrt{2} }[/tex]

[tex]cos(x)=-\frac{1}{\sqrt{2} }[/tex]

Step-by-step explanation:

Our angle is [tex]x=\frac{3\pi }{4}[/tex]

To find our answers for [tex]sin(\frac{3\pi}{4} )[/tex] and [tex]cos(\frac{3\pi}{4} )[/tex], we will need to use a unit circle. (I have attached the image of one).

Recall that the [tex]sin[/tex] of an angle is equal to the y-value of the corresponding ordered pair.

And the [tex]cos[/tex] of an angle is equal to the x-value of the corresponding ordered pair.

For the angle [tex]x=\frac{3\pi }{4}[/tex], the ordered pair is [tex](-\frac{1}{\sqrt{2}} }, \frac{1}{\sqrt{2} } )[/tex]

This means that

[tex]sin(x)=\frac{1}{\sqrt{2} }[/tex]

[tex]cos(x)=-\frac{1}{\sqrt{2} }[/tex]

Answer:

1.56 hours

Step-by-step explanation:

300 gal × 1 min 3.2 gal × 1 hr 60 min = 1.56 hr.

Answer:

i thought the question said a 'HORSE' fills a hot tub...

Step-by-step explanation:

lol dont mind me i just want points :D

Answer:

[tex] P(t) = A (1+r)^t [/tex]

Where P represent the population after t days. a the initial amount on this case 6 and r the growth factor rate of 0.7781. so then our model would be given by:

[tex] P(t)= 6(1.7781)^t [/tex]

And replacing t=4 we got:

[tex] P(4) = 6(1.7781)^4 =59.975 \approx 60[/tex]

So then after 4 days we would expect about 60 protzoa

Step-by-step explanation:

For this case we can use the following function to model the population of protzoa:

[tex] P(t) = A (1+r)^t [/tex]

Where P represent the population after t days. a the initial amount on this case 6 and r the growth factor rate of 0.7781. so then our model would be given by:

[tex] P(t)= 6(1.7781)^t [/tex]

And replacing t=4 we got:

[tex] P(4) = 6(1.7781)^4 =59.975 \approx 60[/tex]

So then after 4 days we would expect about 60 protzoa

Answer:

1. 100[tex]\pi[/tex]

2. 27 [tex]cm^{3}[/tex]

3. 30

Step-by-step explanation:

Area = [tex]\pi[/tex][tex]r^{2}[/tex]

       = [tex]\pi[/tex] x [tex]10x^{2}[/tex]

       = 100[tex]\pi[/tex]

Volume = l x w x h

             = 3 x 3 x 3

             = 27

Answer:

c. 7.25

Step-by-step explanation:

Given the following information from an experiment:

[tex]\left\begin{array}{ccc}&$Sample Size&$Sample Mean \\$Treatment 1&5&4\\$Treatment 2&10&8\\$Treatment 3&5&9\end{array}\right[/tex]

Total Sample Size =5+10+5=20

Therefore, the overall mean

[tex]=\dfrac{(5 \times 4)+ (10 \times 8) + (5 \times 9)}{20} \\=\dfrac{145}{20}\\\\=7.25[/tex]

Answer: The answer is (x-5)^2

Answer:

The rate of trip 2 is 5 km/h

The time of trip 1 is 0.9-x

Step-by-step explanation:

The rate of trip 2 is 5 km/h because it tells you she walked at an avg speed of 5 km/h.

The time of trip 1 is 0.9-x. It's because the time in trip 2 is x, and it says the total is 0.9. So just subtract 0.9-x.

Also I took the test on edge and attached a pic.

Answer:

28

Step-by-step explanation:

Because the lines are parallel:

[tex]\dfrac{m}{21}=\dfrac{8}{6} \\\\m=\dfrac{8}{6}\cdot 21=28[/tex]

Hope this helps!

Answer: decimal

Step-by-step explanation:

because i did this quiz

Answer:

Answer is m∠4=40

Step-by-step explanation:

take note that m∠6 & m∠7 are vertical angles. Vertical angles are equal to each other, therefore m∠6 is equal to m∠7.

m∠6 = m∠7 (vertical angles)

11x + 8 = 12x – 4

12x - 11x = 8 + 4

x = 12

so

m∠6 = 11x + 8  

m∠6 = 11(12) + 8

m∠6 = 132 + 8

m∠6 = 140

m∠4 = 180 - m<6

m∠4 = 180 - 140

m∠4 = 40

Answer:

A

Step-by-step explanation: Took test

Answer:

(A)three eigenvalues, all of them real.

(D)one real eigenvalue and two complex eigenvalues.

(G)only one eigenvalue -- a real one.

Step-by-step explanation:

Given an [tex]n \times n[/tex] matrix, the characteristic polynomial of the matrix is the degree n  polynomial in one variable λ:

[tex]p(\lambda) = det(\lambda I- A)[/tex]

If such [tex]n \times n[/tex] matrix A has real entries, its complex eigenvalues  will always occur in complex conjugate pairs.

Therefore, for a [tex]3 \times 3[/tex] matrix with real entries, the following are possible:

(A)three eigenvalues, all of them real.

(D)one real eigenvalue and two complex eigenvalues.

(G)only one eigenvalue -- a real one.

A [tex]3 \times 3[/tex] matrix with real entries cannot have the following:

(B)three eigenvalues, all of them complex.

(C)two real eigenvalues and one complex eigenvalue.

(E)only two eigenvalues, both of them real.

(F)only two eigenvalues, both of them complex.

(H)only one eigenvalue -- a complex one.

Answer:

it is b

Step-by-step explanation:

the answer is b because

Answer:

Step-by-step explanation:

From the given data:

The row percentage can be determined by: taking each box in each row and by dividing it with its total on that line, after that we will multiply it by 100 to get the result of it's equivalent percentage.

Table reconstruct the table from the question ; we have:

                y                

x              Yes          No              Total

Low           20         10                  30

Medium     15          35                 50

High           20           5                  25

Total          55           50                105

For Low; the total on the row is 30 ;

so for Yes: we have 20/30 × 100 = 66.7

for No ; we have 10/30 × 100 = 33.3

For Medium ; the total on the row is 50 ;

so for Yes: we have 15/50 × 100 = 30

for No ; we have 35/50 × 100 = 70

For High  ; the total on the row is 25;

so for Yes: we have 20/25 × 100 = 80

for No ; we have 5/25 × 100 = 20

                y                

x              Yes          No              Total

Low           66.7     33.3                100

Medium     30        70                  100

High           80       20                   100

b. The construction of a sketch percentage of the frequency bar chat with x on horizontal axis is shown in the attached file below.

Answer:

The expected completion time of this project from now is 2.5 months.

Step-by-step explanation:

To find the expected completion time for the project, we multiply each projection by it's probability.

We have that:

0.4 = 40% probability it takes 2 months to complete the project.

0.3 = 30% probability that it takes 2.5 months to complete the project.

0.2 = 20% probability it takes 3 months to complete the project.

0.1 = 10% probability it takes 3.5 months to complete the project.

What is the expected completion time (in months) of this project from now?

E = 0.4*2 + 0.3*2.5 + 0.2*3 + 0.1*3.5 = 2.5

The expected completion time of this project from now is 2.5 months.

The value of a should be less than -1.

The equation of a parabola is given by the following function,

[tex]y=f(x)=\pm a(x-h)^2+k[/tex]

where,

(h, k) denotes the coordinates of its vertex,

a defines how narrower is the parabola, and the "-" or "+" that the parabola will open up or down.

[tex]f(x) = x^2[/tex]

[tex]g(x)=ax^2[/tex]

For the parabola,g(x) to be narrower than the parabola f(x) the value of a should be less than 1. also for the parabola to open downward the value of a is needed to be negative.

Hence, the value of a should be less than -1.

Learn more about Equation of parabola:

https://brainly.com/question/4443998

Answer:

y=7000+14^t

Step-by-step explanation:

This equation shows that the original population of bats was 7000 and grows exponentially at a rate of 14% per year.

I put the graph below so you can see it.

In this exercise we have to identify how to write an exponential function from the data informed in the text, in this way we find that:

[tex]y=7000+14^t[/tex]

From the information given in the statement we find that:

Then writing this function as:

[tex]y=7000+14^t[/tex]

See more about function at brainly.com/question/5245372

Answer:

true

Step-by-step explanation:

just took test

Answer:

7, 7, 11 are the three numbers.

Step-by-step explanation:

Given:

Mode of the three numbers = 7

Range of numbers i.e. difference between the smallest and the largest number is = 4

Value of highest number card [tex]\neq[/tex] 7

As per the definition of Mode:

Mode is the number that occurs the most number of times in the given set of numbers. In other words, mode is the number whose frequency is the highest in the given set of numbers.

Here, we have three numbers and mode is 7 that means 7 occurs at least  two times in the three numbers.

Also, we are given that 7 is not highest number, plus 4 is the range that means 7 occurs exactly two times out of three numbers.

So, two numbers are 7 and 7.

7 is not highest and 4 is the range, so third number = 7+4 = 11

So, the numbers on the cards are 7, 7 and 11.

Step-by-step explanation:

20fruits=100%

5fruits=?

5x100/20 5fruitsx5%

=24%

Answer: the answer is linear pair

Step-by-step explanation:

Answer:

Linear pair postulate

Step-by-step explanation:

The time taken in draining salt so that only 88 kg of salt remains in tank will be 35.71 sec.

It is given that a tank contains 2000 liters of a solution consisting 112 kg of salt is dissolved in water. Pure water is then pumped at rate of 12 L/sec.

We have to find out that how long it will take to drain out salt such that only 88kg of salt remains in tank.

What will be the amount of water flow ; if a water flows for 4 hours at constant speed of 120 liter /hour ?

The amount of water flow will be 120 liter / hour × 4 hour or 120 × 4 liter or 480 liters.

As per the question ;

In 2000 liters solution there is 112 kg salt.

The pumping speed of water into tank = 12 L/s

The salt pumping per second will be ;

= ( 12L/s × 112kg salt ) / 2000 L

= 0.672 Kg salt/sec

This means that 0.672 kg per second salt comes out .

It should be found that the amount of salt that must be drained so that only 88 kg of salt remain.

So , the amount of salt drained out will be ; (x kg)

⇒ 112kg salt - x kg salt = 88 kg salt

⇒ x kg salt = 112 - 88

⇒ x kg salt = 24 kg

The time taken until only 88 kg of salt remains in the​ tank will be ;

= 24 / 0.672

= 35.71 sec

Thus , the time taken in draining salt so that only 88 kg of salt remains in tank will be 35.71 sec.

To learn more about time and rate click here ;

https://brainly.com/question/3581191

#SPJ2