The solution to all parts is shown below.
1. Using a standard normal distribution table (z-table), the corresponding percentile left of the score for a z-score of 1.93 is approximately 97.65. Therefore, the percentile can be written as an integer of 98.
2. The percentile left of the score corresponding to z-score 1.94 can be found using a standard normal distribution table (z-table).
Looking up the value of 1.94 in the z-table, we find the area under the curve to the left of 1.94 is 0.9732, or 97.32% when rounded to two decimal places.
Therefore, the corresponding percentile left of the score for z-score 1.94 is 97%.
4. Since the normal distribution is symmetrical, we know that the area in the right tail is also 0.0158.
Therefore, the total area of the shaded region is:
= 0.0158 + 0.0158 = 0.0316
7. To determine the percentage of test takers who scored lower than Lorena, we need to find the area to the left of her z-score on the standard normal distribution.
First, we calculate the z-score of Lorena's score:
z = (554 - 495) / 20 = 2.95
Using a standard normal distribution table or calculator, we find that the area to the left of z = 2.95 is approximately 0.9985. This means that approximately 99.85% of test takers scored lower than Lorena.
Therefore, Lorena scored better than about
100% - 99.85% = 0.15% of test takers, which can be rounded to 0.2%.
Learn more about z-score here:
https://brainly.com/question/15016913
#SPJ1
what are reio it looks like this 4to9, 4:9, 4\9
4to9, 4:9, and 4\9 are all different ways to the same ratio of 4 to 9. Ratios are a fundamental concept in mathematics, and they are used in various fields such as finance, physics, and engineering.
"Reio" is not a known mathematical term or concept. However, the three expressions you provided, 4to9, 4:9, and 4\9, represent different ways to write a ratio.
A ratio is a mathematical comparison of two or more quantities, often written in the form of a fraction or with a colon. It is used to describe the relationship between the quantities being compared.
The expression 4to9, also written as 4:9, represents a ratio of 4 to 9. This means that there are 4 units of one quantity for every 9 units of another quantity. The ratio can be simplified by dividing both the numerator and denominator by their greatest common factor, if any.
The expression 4/9, written with a forward slash, represents the same ratio as 4 to 9. This is because a ratio can be expressed as a fraction, where the numerator represents one quantity and the denominator represents the other quantity.4to9, 4:9, and 4\9 are all different ways to write the same ratio of 4 to 9. Ratios are a fundamental concept in mathematics, and they are used in various fields such as finance, physics, and engineering.
To know more about Ratios .
https://brainly.com/question/12024093
#SPJ11
find the tangential and normal components of the acceleration vector. r(t) = 2(3t − t3) i + 6t2 j
The tangential component is 4t/(3 + 12t^2)(1 - t^2)i + 8t^2/(3 + 12t^2)j and the normal component is (-12t)/(3 + 12t^2)(1 - t^2)i + [24(3 + 4t^2)]/(3 + 12t^2)j.
We can start by finding the velocity and acceleration vectors:
r(t) = 2(3t - t^3)i + 6t^2j
v(t) = dr/dt = 6(1 - t^2)i + 12tj
a(t) = dv/dt = -12ti + 24j
To find the tangential and normal components of the acceleration vector, we need to project it onto the velocity vector. Let's call the tangential component aT and the normal component aN. Then:
aT = projv a = (a ⋅ v/|v|^2)v = [(0)(6(1 - t^2)) + (24)(12t)]/[(6(1 - t^2))^2 + (12t)^2](6(1 - t^2)i + 12tj)
aT = (24t)/(36 + 144t^2)(6(1 - t^2)i + 12tj)
aT = 4t/(3 + 12t^2)(1 - t^2)i + 8t^2/(3 + 12t^2)j
To find the normal component, we subtract the tangential component from the acceleration vector:
aN = a - aT
aN = (-12t)i + 24j - [4t/(3 + 12t^2)(6(1 - t^2)i + 12tj)]
aN = (-12t)/(3 + 12t^2)(1 - t^2)i + [24(3 + 4t^2)]/(3 + 12t^2)j
Learn more about velocity at: brainly.com/question/30559316
#SPJ11
help me
i cant figure it out
Answer:
Step-by-step explanation:
Listen I don't know but good luck listen to AutoGraph
and my latest song The Light
999 Forever
the distance between a and b on the real line is d(a, b) =
The distance between two points a and b on the real line is given by the absolute difference between the two points, which is calculated as the positive difference between the values of a and b regardless of their order.
The distance function, denoted as d(a, b), is a metric that satisfies the properties of non-negativity, symmetry, and the triangle inequality. It is used to quantify the distance between two points in one-dimensional space, and is an important concept in geometry, analysis, and other fields of mathematics. The distance formula can be extended to higher dimensions and is used in various applications such as optimization, clustering, and machine learning.
The distance between two points a and b on the real line is given by the absolute difference between the two points: d(a, b) = |a - b|
To learn more about symmetry : brainly.com/question/1597409
#SPJ11
NO CALCULATOR IS ALLOWED FOR THIS QUESTION.
Show all of your work, even though the question may not explicitly remind you to do so. Clearly
label any functions, graphs, tables, or other objects that you use. Justifications require that you give
mathematical reasons, and that you verify the needed conditions under which relevant theorems,
properties, definitions, or tests are applied. Your work will be scored on the correctness and
completeness of your methods as well as your answers. Answers without supporting work will
usually not receive credit.
Unless otherwise specified, answers (numeric or algebraic) need not be simplified. If your answer is
given as a decimal approximation, it should be correct to three places after the decimal point.
Unless otherwise specified, the domain of a function f is assumed to be the set of all real numbers
x for which f(x) is a real number.
f(x) =
Let f be the function defined above.
√9-x²
for -3≤x≤0
-x+3 cos (pie*x/2) for 0 < x≤ 4
(a) Find the average rate of change of f on the interval -3 ≤x ≤ 4.
(b) Write an equation for the line tangent to the graph of f at x= 3.
(c) Find the average value of f on the interval-3 ≤x≤ 4.
(d) Must there be a value of x at which f(x) attains an absolute maximum on the closed interval -3 ≤x≤ 4 Justify your answer.
Answer:
(a) The average rate of change of f on the interval [-3,4] is given by:
(1/(4-(-3))) * ∫[a,b] f(x) dx
where a = -3 and b = 4. We can break up the integral into two parts, one over the interval [-3,0] and the other over the interval (0,4]:
(1/7) * [∫[-3,0] √(9-x²) dx + ∫[0,4] (-x+3cos(πx/2)) dx]
For the first integral, we recognize that the integrand is the equation of the top half of a circle with radius 3 centered at the origin. Therefore, we can use the substitution x = 3sin(t), dx = 3cos(t)dt, to get:
∫[-3,0] √(9-x²) dx = ∫[-π/2,0] 9cos²(t) dt = (9/2) * [sin(t)cos(t) + t]_[-π/2,0] = (9π - 81)/4
For the second integral, we can use integration by parts with u = -x and dv = cos(πx/2) dx to get:
∫[0,4] (-x+3cos(πx/2)) dx = [-x²/2 + (6/π)sin(πx/2)]_0^4 = -8
Therefore, the average rate of change of f on the interval [-3,4] is:
(1/7) * [(9π - 81)/4 - 8] = (9π - 145)/28
(b) To find the equation of the tangent line to the graph of f at x = 3, we need to find the slope of the tangent. Since f is not differentiable at x = 0 (due to the cosine term), we need to consider the left and right derivatives separately.
For x < 0, the function is the equation of the top half of a circle with radius 3 centered at the origin, so the slope of the tangent at x = 3 is:
f'(3-) = -√(9-3²)/(3-0) = -√6
For x > 0, we have:
f'(x) = -1 - (3π/4)sin(πx/2)
So the slope of the tangent at x = 3 is:
f'(3+) = -1 - (3π/4)sin(3π/2) = -1 + (3π/4)
The equation of the tangent line is therefore:
y - f(3) = f'(3)(x-3)
y + √(9-3²) = (-√6)(x-3) (for x < 0)
y - 6 + 3cos(π/2) = [(-1 + (3π/4))(x-3)] (for x > 0)
(c) The average value of f on the interval [-3,4] is given by:
(1/(4-(-3))) * ∫[-3,4] f(x) dx
Using the same breakdown of the integral as in part (a), we have:
(1/7) * [∫[-3,0] √(9-x²) dx + ∫[0,4] (-x+3cos(πx/2)) dx]
The first integral was evaluated in part (a
Step-by-step explanation:
Find the value of b in rhombus UVWX.
W
V
b-16°
U
2b-62°
X
The value of b in Rhombus UVWX is 86 degrees.
In a rhombus, opposite angles are congruent, so we have:
Angle W = Angle U = 90 degrees (since UVWX is a rhombus)
Angle V = Angle X (opposite angles are congruent)
Using the fact that the sum of the angles in a quadrilateral is 360 degrees, we can write an equation in terms of b:
Angle U + Angle V + Angle W + Angle X = 360 degrees
Substituting the known values, we get:
90 + Angle V + 90 + Angle X = 360
Simplifying, we get:
Angle V + Angle X = 180
Substituting Angle V = 2b - 62 and Angle X = b - 16, we get:
2b - 62 + b - 16 = 180
Simplifying, we get:
3b - 78 = 180
Adding 78 to both sides, we get:
3b = 258
Dividing by 3, we get:
b = 86
Therefore, the value of b in rhombus UVWX is 86 degrees.
To know more about Rhombus .
https://brainly.com/question/29629002
#SPJ11
dave coaches a roller hockey team and has a big bin of hockey pucks he uses at practice sessions. he randomly grabs some pucks from the bin and throws them onto the rink for the upcoming practice. so far, he's grabbed 4 red, 3 orange, 1 yellow, 2 pink, and 2 green pucks. based on the data, what is the probability that the next puck dave grabs will be green?
The probability that the next puck Dave grabs will be green is 1/6 or approximately 0.167.
To determine the probability of Dave grabbing a green puck on the next grab, we need to calculate the probability based on the given data.
Given:
Number of red pucks = 4
Number of orange pucks = 3
Number of yellow pucks = 1
Number of pink pucks = 2
Number of green pucks = 2
Total number of pucks = 4 + 3 + 1 + 2 + 2 = 12 pucks
The probability of grabbing a green puck can be calculated as:
Probability = Number of green pucks / Total number of pucks
Probability = 2 green pucks / 12 pucks
Probability = 1/6
Know more about probability here;
https://brainly.com/question/32004014
#SPJ11
in the item procurement importance matrix, what item is described as low risk, low value?
In the item procurement importance matrix, the item described as low risk, low value is referred to as a non-critical item.
The item procurement importance matrix is a tool used in procurement management to categorize items based on their importance and risk. It helps in determining the appropriate procurement strategies and allocation of resources. The matrix typically categorizes items into four quadrants based on their value and risk levels: critical, strategic, non-critical, and bottleneck.
A non-critical item is characterized by low risk and low value. These items are generally of lesser importance in terms of their impact on the overall procurement process. They may include non-essential or low-cost items that are easily replaceable or have minimal consequences if they experience delays or disruptions in the supply chain.
Therefore, in the item procurement importance matrix, the item described as low risk, low value is categorized as a non-critical item.
Learn more about Procurement Management here: brainly.com/question/29972305
#SPJ11
The equation of a parabola is y=2x^2 +8x +3
Write the equation in vertex form and show your work.
Answer: y = 2(x + 2)² - 5
Step-by-step explanation:
We are going to use the completing the square method to transform this quadratic equation from standard form to vertex form.
Given:
y = 2x² + 8x + 3
Factor the 2 out of the first two terms:
y = 2(x² + 4x) + 3
Add and subtract [tex]\frac{b}{2} ^2[/tex]:
y = 2(x² + 4x + 4 - 4) + 3
Distribute the 2 into -4 and combine with the 3:
y = 2(x² + 4x + 4) - 5
Factor (x² + 4x + 4):
y = 2(x + 2)² - 5
a town wants to fence in a rectangular section of a park.
Answer:
A: area of one additional plan exceeds 624 square feet ...... it does not
Step-by-step explanation:
let's lay out the six additional plans:
plan width length area
6 26 24 624
7 28 22 616
8 30 20 600
9 32 18 576
10 34 16 544
11 36 14 504
A: one additional plan (plan 6) does not exceed 624. so this incorrect
B: one of the plans (plan 11) is less than 544. this is correct.
C: area of plan 6 = area of plan 5. this is correct.
D: Plan 7 area (616) is less than area of plan 6 (624). this is correct.
So, A is incorrect
for a school play, there were adult tickets for 9 each and child tickets for 5 dollars each. the 400 seat auditorium sold out and the total ticket sales was 2600 dollars. how many of each type of ticket were sold?
The number of tickets were sold are; 150 for adult tickets and 250 for child tickets
There are 400 seats in the auditorium which means that there are 400 tickets to be sold and the total ticket sales were 2600 dollars.
Since there were adult tickets for 9 each and child tickets for 5 dollars each.
9x + 5y = 2600
x + y = 400
Solving;
9x + 5(400-x) = 2600
9x + 2000 - 5x = 2600
4x = 600
x = 150
Then y = 250
Learn more about the unitary method, please visit the link given below;
https://brainly.com/question/23423168
#SPJ1
a and b are vectors that are not parallel
:)
The parallel vectors to CD are:
V = 20a - 15bV' =10a - 20b + 2a + 11bV'' = (-8a + 6b) = -2*(4a - 3b) V''' = a - (3/4)b = (1/4)*(4a - 3b)Which vectors are parallel to CD?Here we have the vector:
CD = 4a - 3b
Where a and b are vectors.
A vector V will be parallel to CD if we can find a scalar number k such that we can write the vector as:
V = k*CD
The second option:
V = 20a - 15b
We can rewrite this as:
V = 20a - 15b = 5*(4a - 3b) this vector is parallel.
The third one is:
V' =10a - 20b + 2a + 11b
V' = 12a - 9b = 3*(4a - 3b) this vector is parallel.
V'' = (-8a + 6b) = -2*(4a - 3b) this vector is parallel.
V''' = a - (3/4)b = (1/4)*(4a - 3b) this vector is parallel.
These are all the parallel vectors.
Learn more about vectors at:
https://brainly.com/question/3184914
#SPJ1
7. The circle below has a center P. Name the minor arc and find its measure. The
figure is not drawn to scale
R
20
Q
Arc QS; 262 Degrees
Arc QRS; 262 Degrees
O Arc QS; 98 Degrees
O Arc QRS; 98 degrees
P
98°
S
The minor arc is QS and the measure of the arc is 98°
What is an arc?An arc is a smooth curve joining two endpoints. It can also be defined as the portion of a circumference of a circle. The circumference of a circle will be divided into minor arc and major arc.
The major arc is the arc that bounds the big sector and the minor arc is the arc that bounds the small sector.
A sector is an area bounded radii and an arc
Therefore the minor arc is arc SQ and the measure of the arc is also 98°. This is because the angle substended by the arc is equal to the measure of the arc.
learn more about arc from
https://brainly.com/question/2005046
#SPJ1
can anyone please help i need this asap
Using the tangent of the angle from trigonometric ratio, the value of x is 4.0
What is trigonometric ratio?In trigonometry, there are six trigonometric ratios, namely, sine, cosine, tangent, secant, cosecant, and cotangent. These ratios are written as sin, cos, tan, sec, cosec(or csc), and cot in short.
sin θ = opposite / hypothenuse
cos θ = adjacent / hypothenuse
tan θ = opposite / adjacent
To solve this problem, we can use the tangent of the angle.
tan θ = opposite / adjacent
tan 20 = x / 11
Cross multiply both sides;
x = 11 tan 20
x = 4.0
Learn more on trigonometric ratio here;
https://brainly.com/question/17155803
#SPJ1
What multiplies to 105 and adds to -22
The two numbers are -15 and -7.
We have,
To solve this problem, we need to find two numbers that multiply to 105 and add up to -22.
We can start by listing the factors of 105: 1, 3, 5, 7, 15, 21, 35, and 105.
Then, we can try adding pairs of factors to see if we get -22.
We have the system of equations:
xy = 105
x + y = -22
We can solve for one variable in terms of the other using the second equation:
y = -22 - x
Then, we can substitute this into the first equation:
x(-22 - x) = 105
Expanding and rearranging, we get:
x² + 22x + 105 = 0
Now, we can use the quadratic formula to solve for x:
x = (-22 ± √(22² - 4(1)(105))) / 2
x = (-22 ± 4) / 2
x = -15 or x = -7
Thus,
The two numbers are -15 and -7.
Learn more about expressions here:
https://brainly.com/question/3118662
#SPJ1
Please HELPP!!!!! I badly need this. Math, Geometry, circle unit.
The requried measures of DEF and x are 82° and 90° respectively.
In a quadrilateral, the sum of the opposite angle is 180°,
So,
98 + y = 180
y = 180 - 98
y = 82°
Similarly,
x + x = 180
2x = 90
x = 90°
Thus, the requried measures of DEF and x are 82° and 90° respectively.
Learn more about quadrilaterals here:
https://brainly.com/question/29934440
#SPJ1
The two dot plots below show the number of miles run by 14 students at the start and end of the school year. 100 points and brainliest
Mean for start of school year is 6.5; Mean for end of school year is 7.2.
Median for start of school year is 6.5; Median for end of school year is 7.
How to Find the Mean and Median of a Data Set from a Dot Plot?To find the means, list out each data value given for each dot plot and calculated the mean.
Mean for start of school year:
We have, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 9
Mean = ( 4 + 5 + 5 + 6 + 6 + 6 + 6 + 7 + 7 + 7 + 7 + 8 + 8 + 9)/14
= 91/14
Mean ≈ 6.5
Mean for end of school year:
We have, 5, 5, 6, 6, 7, 7, 7, 7, 8, 8, 8, 9, 9, 9
Mean = ( 5 + 5 + 6 + 6 + 7 + 7 + 7 + 7 + 8 + 8 + 8 + 9 + 9 + 9)/14
= 101/14
Mean ≈ 7.2
Median represents the middle data value in a data set, therefore:
Median for start of school year = ( 6 + 7)/2 = 6.5
Median for end of school year = ( 7 + 7)/2 = 7
Learn more about mean and median on:
https://brainly.com/question/16800683
#SPJ1
Do the data in the table represent a direct variation or an inverse variation? Write an equation
to model the data in the table.
x1 3 4 7
y5152035
The data in the table represent a direct variation
The equation is y = 5x
How to determine if the data in the table represent a direct variation or an inverse variation?From the question, we have the following parameters that can be used in our computation:
x 1 3 4 7
y 5 15 20 35
In the above table of values, we can see that
As the x values, the y values increase
This means that the table of values represent a direct variation
Write an equation to model the data in the table.The equation is a direct variation
So, we have
y = kx
The value of k is calculated as
k = 5/1
So, we have
k = 5
This means that
y = 5x
Hence, the equation is y = 5x
Read more about direct variation at
https://brainly.com/question/6499629
#SPJ1
What is the MOST commonly used form of open-end credit?
Answer: Credit cards
Step-by-step explanation:
(you can search it up as well)
assume that there are 10 students in a class. the average grade on a test for the nine of the students is 85. the grade of the tenth student is 90. the average grade for the class will be
Answer:
85.5
Step-by-step explanation:
85 • 9 is 765
If you add 90 to 765 and then divide the sum by 10, you get 85.5.
Alex. Bobbie and Chris share strawberries in the ratio:-
Alex:Bobbie:Chris = 3:2:2
Chris receives 12 strawberries.
Calculate the total number of strawberries shared.
pls help i will mark brainliesttt
According to the description, element a21 will represent B. 100.
How to determine the elementAccording to the question, the rows represent the type of music while the columns represent the weeks. Now the element that we have is a21. The 2 in the element stands for the rows which is the type of music and this is R and B.
The column is the weeks and since we have the column as 1, we will look at week 1 and the second bar in that week which is R and B. So, the correct description is option B.
Learn more about rows and columns here:
https://brainly.com/question/30039670
#SPJ1
Determine the inverse function for the given one-to-one function and show that
f(f^-1(x)) = x and f^-¹(f(x)) = x.
f(x) = 4x + 12
Answer:
To find the inverse function of f(x) = 4x + 12, we follow these steps:Replace f(x) with y: y = 4x + 12.Swap the variables x and y: x = 4y + 12.Solve for y in terms of x: y = (x - 12) / 4.Therefore, the inverse function of f(x) is f^-1(x) = (x - 12) / 4.Now, we can verify that f(f^-1(x)) = x and f^-1(f(x)) = x as follows:f(f^-1(x)) = f((x - 12) / 4) [substitute f^-1(x) into f(x)]
= 4((x - 12) / 4) + 12 [substitute (x - 12) / 4 into 4x + 12]
= x [simplify]Therefore, f(f^-1(x)) = x.f^-1(f(x)) = ((4x + 12) - 12) / 4 [substitute f(x) into f^-1(x)]
= x / 4 [simplify]Therefore, f^-1(f(x)) = x/4.Since f(f^-1(x)) = x and f^-1(f(x)) = x/4, we have verified that the inverse function of f(x) satisfies the conditions of an inverse function.
Step-by-step explanation:
A 2-gallon bottle of fabric softener costs $30.72. What is the price per cup?
Answer:
$0.96
Step-by-step explanation:
ok so 30.72 divided by 2 is 15.36. So 1 gallon is $15.36.
there are 16 cups in a gallon.
So there are 32 cups.
$15.36 dollars in gallons converted to that of 16 cups, or $30.72 dollars in gallons to 32 cups..
30.72 divided by 32 is 0.96. 15.36 divided by 16 is 0.96.
So, $0.96 is the price per cup
An expression is shown.
3/72
Which expression is equivalent to the given expression?
A
B
C
D
2.39
6.3/2
3./24
6.12
The mean weight for a sample of a certain kind of ring made from platinum is 8.21 grams. The mean weight for a sample of a certain kind of ring made from gold is 8.61 grams. Is there a meaningful difference in the weights of the two types of rings? Explain your reasoning.
There is no meaningful difference in the weights of the two types of rings
Checking if there is a meaningful difference in the weightsFrom the question, we have the following parameters that can be used in our computation:
Platinum = 8.21 grams
Gold = 8.61 grams
The difference in these weights is
Difference = 8.61 grams - 8.21 grams
Evaluate the difference
Difference = 0.4 grams
This value approximates to 0
This means that there is no meaningful difference in the weights
Read more about metric units at
https://brainly.com/question/28234927
#SPJ1
a pharmaceutical is developing a new drug. the drug was found to be 80% effective, but the company wants to estimate the proportion better by sampling more patients until the margin of error for a 98% confidence interval is less than 0.005. how many patients should be included in the sample?
To estimate the required sample size for a pharmaceutical company developing a new drug, we need to consider the proportion of effectiveness, desired margin of error, and confidence interval. Therefore, approximately 1846 patients should be included in the sample to achieve the desired margin of error for a 98% confidence interval.
To estimate the proportion better, the pharmaceutical company needs to increase their sample size until the margin of error is less than 0.005 for a 98% confidence interval. The margin of error is the amount of error that is allowed in a study and is determined by the sample size. The larger the sample size, the smaller the margin of error.
To calculate the sample size, we can use a formula that includes the level of confidence, margin of error, and the estimated proportion. Since the drug was found to be 80% effective, we can use this as our estimated proportion.
The formula to calculate the sample size is:
n = (Z^2 * p * q) / E^2
where n is the sample size, Z is the z-score corresponding to the desired level of confidence (2.33 for 98% confidence interval), p is the estimated proportion (0.8), q is 1-p (0.2), and E is the desired margin of error (0.005).
Plugging in the values, we get:
n = (2.33^2 * 0.8 * 0.2) / 0.005^2
n = 23474.4
Rounding up to the nearest whole number, the pharmaceutical company should sample at least 23475 patients to achieve a margin of error less than 0.005 for a 98% confidence interval.
To estimate the required sample size for a pharmaceutical company developing a new drug, we need to consider the proportion of effectiveness, desired margin of error, and confidence interval. In this case, the drug is 80% effective, and the company wants a margin of error less than 0.005 for a 98% confidence interval.
To calculate the sample size, we use the formula for sample size estimation in proportion:
n = (Z^2 * p * (1-p)) / E^2
where n is the sample size, Z is the Z-score corresponding to the desired confidence interval, p is the proportion of effectiveness (0.8 in this case), and E is the desired margin of error (0.005).
For a 98% confidence interval, the Z-score is approximately 2.33. Plugging the values into the formula:
n = (2.33^2 * 0.8 * (1-0.8)) / 0.005^2
n ≈ 1846
Therefore, approximately 1846 patients should be included in the sample to achieve the desired margin of error for a 98% confidence interval.
To know more about Proportion visit:
https://brainly.com/question/29474065
#SPJ11
Guys pls help thank you
Step-by-step explanation:
Use the equation, A = p(1+ r/n)^Tn
n = 12 because it's monthly
T = 20
P = 25,000
r = .01
plug it all in and that question A i think
Assume the weight of a randomly chosen American passenger car is a uniformly distributed random variable ranging from 2,180 pounds to 4,449 pounds.
[a] Mean weight of a randomly chosen vehicle
[b] Standard deviation of a randomly chosen vehicle
[c] Probability a vehicle will weigh less than 2,389 pounds
[d] Probability a vehicle will weigh more than 3,672 pounds
[e] Probability a vehicle will weigh between 2,389 and 3,672 pounds
The mean weight of a randomly chosen vehicle can be calculated by taking the average of the minimum and maximum weights:
Mean = (2,180 + 4,449) / 2 = 3,314.5 pounds
The standard deviation of a uniformly distributed random variable can be calculated using the following formula:
Standard Deviation = (Max - Min) / √12
Standard Deviation = (4,449 - 2,180) / √12 ≈ 652.48 pounds
To find the probability that a vehicle will weigh less than 2,389 pounds, we need to calculate the proportion of the total range that falls below 2,389 pounds:
Probability = (2,389 - 2,180) / (4,449 - 2,180) ≈ 0.317
To find the probability that a vehicle will weigh more than 3,672 pounds, we need to calculate the proportion of the total range that exceeds 3,672 pounds:
Probability = (4,449 - 3,672) / (4,449 - 2,180) ≈ 0.361
To find the probability that a vehicle will weigh between 2,389 and 3,672 pounds, we need to calculate the proportion of the total range that falls within this interval:
Probability = (3,672 - 2,389) / (4,449 - 2,180) ≈ 0.322
Know more about mean weight here:
https://brainly.com/question/16170417
#SPJ11
the number of research papers in dr. carey's area of expertise has been increasing by 3% every year. given that 34,176 research papers were published this year, how many will be published 2 years from now?
If the number of research papers in Dr. Carey's area of expertise is increasing by 3% every year and 34,176 research papers were published this year, then approximately 35,168 research papers will be published two years from now.
To calculate the number of research papers that will be published two years from now, we need to apply the 3% annual increase for two consecutive years to the initial count of 34,176 papers.
First, we calculate the increase for the first year:
Increase = 34,176 * 3% = 34,176 * 0.03 = 1,025.28 (approximately)
Next, we add this increase to the initial count to get the count after one year:
Count after one year = 34,176 + 1,025.28 = 35,201.28 (approximately)
Now, we calculate the increase for the second year based on the count after one year:
Increase = 35,201.28 * 3% = 35,201.28 * 0.03 = 1,056.04 (approximately)
Finally, we add this increase to the count after one year to get the count after two years:
Count after two years = 35,201.28 + 1,056.04 = 36,257.32 (approximately)
Therefore, approximately 36,257 research papers will be published two years from now.
Learn more about Consecutive Numbers here: brainly.com/question/29775116
#SPJ11