I WILL GIVE BRAINLIEST

Answer:

Can A will make a louder and stronger fizz than can B.

Explanation:

Temperature has a direct effect on gas solubility. We know that carbonated water contains carbon dioxide dissolved in water. The extent of dissolution or solubility of this gas is dependent on the temperature of the system.

As the temperature of the system rises, the solubility of gas in solution decreases. It follows that can A, having been stored in a garage is definitely at a higher temperature than can B stored in the refrigerator.

Since solubility of gases decreases with increasing temperature, the carbon dioxide in can A will be less soluble than in can B. This will cause can A to make a louder and stronger fizz when opened than can B.

Answer:

Sol is a colloidal suspension with solid particles in a liquid. Foam is formed when many gas particles are trapped in a liquid or solid. Aerosol contains small particles of liquid or solid dispersed in a gas. While solid solution contain solid as solute in either solid, liquid or gas.

Answer:

D. Nitrogen has 5 valence electrons.

Explanation:

Nitrogen is an element in group 5A of the periodic table. Elements in group 5A all contain just 5 valence electrons. (Electrons in the outer shell).

**Elements are organized into these groups in a periodic table based on the number of valence electrons which determines their charge. (Does not apply to transition metals)

Answer: HA has lowest pH and it is the most acidic as compared to the rest of given acids.

Explanation:

We know that relation between [tex]pK_a[/tex] and [tex]K_a[/tex] is as follows.

       [tex]pK_a = -log K_a[/tex]

This means that more is the value of [tex]K_a[/tex], smaller will be the [tex]pK_a[/tex]. Also, more is the value of [tex]K_a[/tex] smaller will be the pH of a solution.

As, larger is the value of [tex]K_a[/tex] more negative will be the [tex]pK_a[/tex] value. Hence, stronger will be the acid.

In the given options, HA has the smallest [tex]pK_a[/tex] value.

Therefore, we can conclude that HA has lowest pH and it is the most acidic as compared to the rest of given acids.

Answer:

Q = 12.38

Explanation:

The Nernst equation is given as; Ecell = E°cell - (2.303RT/nF) log Q  ;where Q is the reaction quotient.

The reaction quotient, Q  in a reaction, is the product of the concentrations of the products divided by the product of the concentrations of the reactants.

In an electrochemical cell, Q is the ratio of the concentration of the electrolyte at the anode to that of the electrolyte at the cathode.

Q = [anode]/[cathode]

therefore , Q = 0.052/0.0042 = 12.38

Answer:

1. In order to reach equilibrium COCl₂(g) must be consumed.

B. False

2. In order to reach equilibrium Kc must increase.

B. False .

3. In order to reach equilibrium CO must be consumed.

A. True.

4. Qc is greater than Kc.

A. True

5. The reaction is at equilibrium. No further reaction will occur.

B. False.

Explanation:

Based on the reaction:

COCl₂(g) → CO (g) + Cl₂(g)

And Kc is defined as:

Kc = 1.29x10⁻² = [CO] [Cl₂] / [COCl₂]

Molar concentrations of each species are:

[COCl₂] = 0.104 moles of COCl₂ / 1L = 0.104M

[CO] = 4.66×10⁻² moles of CO / 1L = 4.66×10⁻²M

[Cl₂] = 3.76×10⁻² moles of Cl₂ / 1L = 3.76×10⁻²M

Replacing in Kc formula:

4.66×10⁻²M × 3.76×10⁻²M / 0.104M = 1.68x10⁻²

As the concentrations are not in equilibrium, 1.68x10⁻² is defined as the reaction quotient, Qc.

As Qc > Kc, the reaction will shift to the left producing more COCl₂ and consuming CO and Cl₂. Thus

1. In order to reach equilibrium COCl₂(g) must be consumed.

B. False

2. In order to reach equilibrium Kc must increase.

B. False . Kc is a constant that never change.

3. In order to reach equilibrium CO must be consumed.

A. True.

4. Qc is greater than Kc.

A. True

5. The reaction is at equilibrium. No further reaction will occur.

B. False. The reaction is in equilibrium when Qc = Kc

Answer:

Molecular:

Ba(NO3)2 + K2CO3 -> BaCO3 + 2KNO3

Complete ionic:

Ba2+ + 2NO3- + 2K+ + CO3 2- -> BaCO3 + 2K+ + 2NO3-

Net ionic:

Ba2+ + CO3 2- - > BaCO3

Explanation:

Molecular consists of all species reacting.

Complete ionic consists of all ionic species (ex. K+, NO3-) separated, as well as any compounds that didn't dissociate into ions (BaCO3 doesn't dissolve).

Net ionic doesn't include spectator ions (in this case, nitrate and potassium) and only species that aren't present on both sides of the arrow (barium and carbonate become a solid precipitate, so the ions aren't present as products, making them appear in the net ionic equation).

Answer:

A. 30

Explanation:

Retinol is the chemical form of Vitamin A. It has a chemical formula of C20H30O.

It is processed when retinyl palmitate is broken down in the small intestine. Retinol helps in the proper regulation of eye cells hence a vital component in ensuring good eye sight.

It also helps in the neutralization of free radicals in the body and acts as an antioxidant which prevents cells of the body from ageing.

Answer:

The percentage of the void space out of the total volume occupied is 93.11%

Explanation:

A mole of water contains 2 atoms of hydrogen and 1 atom of oxygen.

To calculate the volume of a mole of water, we calculate 2 times the volume of the hydrogen atom and 1 times the volume of the oxygen atom

Let's calculate this one after the other.

For the hydrogen, formula for the volume will be

[tex]V_{hydrogen[/tex] = 2 × 4/3 × π × [tex]r_{H}^{3}[/tex]

where [tex]r_{H}^{3}[/tex] = 37 pm which is read as 37 picometer (1 picometer = 10^-12 m) = 37 × [tex]10^{-12}[/tex] meters

Volume of the hydrogen = 8/3 × (37 × 10^-12)^3 = 4.05 * 10^-31

we multiply this by the avogadro's number = 6.02 * 10^23

= 4.05 * 10^-31 * 6.02 * 10^23 = 2.6 * 10^-8 m^3

We do same for thr oxygen, but this time we do not multiply the volume of the oxygen by 2 as we have only one atom of oxygen

Volume of oxygen = 4/3 * π * (73 * 10^-12) ^3 * avogadro's number = 9.81 * 10^-7 m^3

adding both volumes together, we have 1.24 * 10^-6 m^3 or simply 1.24 ml ( 0.01 m = 1 ml)

Dividing the molar mass of one mole of water by its density, we can get the volume of 1 mole of water

= (18g/mol)/(1 g/ml) = 18 ml/mol

Now we proceed to calculate the volume of void = Total volume - volume of molecule = 18 - 1.24 = 16.76 ml

Now, the percentage of void = volume of void/total volume * 100%

= 16.76/18 * 100% = 93.11%

Answer: Positive environmental changes.

Explanation: Without many humans around, the environment has been getting better as more sea life have been spotted in places they haven't been for decades, as well as clearer waters and less rubbish about. Pollution levels have dropped as there are barley any planes in the sky and not many cars about.

Answer:

honestly,i can say that socially being away from people reduces stress

Explanation:

Answer:

A

Explanation:

Arsenic is in the same group as Nitrogen - group 5. They all have 5 valence electrons in their outermost shell. To achieve its most stable state - 8 valence electrons (octet rule - elements are most stable when the entire shell is filled) - arsenic needs to gain 3 electrons. Since electrons have a negative charge, the charge of an As ion would be -3.

Try observing the periodic table and how many valence electrons that each element has. From there, you can determine the charges of the elements lithium and strontium. You can guess, I'll help you with those once you attempt to find the charge of those ions.

Answer:

The fugacity coefficient is  [tex][\frac{f}{p} ] = 1.45[/tex]

Explanation:

From the question we are told that

  The gas obeys the equation [tex]p(v-b) = RT[/tex]

   The value  of b is  [tex]b = b = 0.0391 \ L /mol[/tex]

   The pressure is  [tex]p = 1000 \ atm[/tex]

    The temperature is [tex]T= 1000^oC = 1273 K[/tex]

generally

        [tex]RT ln[\frac{f}{p} ] = \int\limits^{p}_{o} [ {v_{r} -v_{i}} ]\, dp[/tex]

Where  [tex]\frac{f}{p}[/tex] is the fugacity coefficient

          [tex]v_r[/tex] is the real volume which is mathematically evaluated from above equation  as

           [tex]v_r = \frac{RT}{p} + b[/tex]

           [tex]v_r = \frac{RT}{p} + 0.0391[/tex]

and     [tex]v_{i}[/tex] is the ideal volume which is evaluated from the ideal gas equation (pv = nRT , at  n= 1) as

         [tex]v_{i} = \frac{RT}{p}[/tex]

So

     [tex]RT ln[\frac{f}{p} ] = \int\limits^{1000}_{o} [[ \frac{RT}{p} + 0.0391] - [\frac{RT}{p} ]} ]\, dp[/tex]

=>      [tex]RT ln[\frac{f}{p} ] = \int\limits^{1000}_{o} [0.391 ]\, dp[/tex]

=>    [tex]RT ln[\frac{f}{p} ] = [0.391p]\left | 1000} \atop {0}} \right.[/tex]

=>   [tex]RT ln[\frac{f}{p} ] = 38.1[/tex]

   So

         [tex]ln[\frac{f}{p} ] = \frac{39.1}{RT}[/tex]

Where R is the gas constant with value [tex]R = 0.082057\ L \cdot atm \cdot mol^{-1}\cdot K^{-1}[/tex]

         [tex][\frac{f}{p} ] = \frac{39.1}{ 2.303 *0.082057 * 1273}[/tex]

        [tex][\frac{f}{p} ] = 1.45[/tex]

Answer:

a technique in which cells are purposefully grown under specific conditions

Explanation:

Answer:

its c

Explanation:

correct edge2020

Answer:

C₅H₅N being the weakest base

Explanation:

A weak base (B) is defined as a chemical compound that, in reaction with water, produce a small quantity of BH⁺

The general reaction is:

B + H₂O ⇄ BH⁺ + OH⁻ Where Kb is defined as:

Kb = [BH⁺] [OH⁻] / [B]

That means the smallest Kb is the weakest base because is producing the smallest quantity of BH⁺.

In the problem, the smallest Kb is C₅H₅N being the weakest base.

Answer:

NH4NO3 = N2O + 2(H2O)

Explanation:

there are 2 N, 4 H, 3 O

Answer:

NH4NO3=N2O+2H2O

Explanation:

N-2,O-3,H-4

Answer: 1. [tex]H^++OH^-\rightarrow H_2O[/tex]  Lewis acid : [tex]H^+[/tex], Lewis base : [tex]OH^-[/tex]

2. [tex]Cl^-+BCl_3\rightarrow BCl_4^-[/tex] Lewis acid : [tex]BCl_3[/tex], Lewis base : [tex]Cl^-[/tex]

3. [tex]K^++6H_2O\rightarrow K(H_2O)_6[/tex] Lewis acid : [tex]K^+[/tex], Lewis base : [tex]H_2O[/tex]

Explanation:

According to the Lewis concept, an acid is defined as a substance that accepts electron pairs and base is defined as a substance which donates electron pairs.

1. [tex]H^++OH^-\rightarrow H_2O[/tex]

As [tex]H^+[/tex] gained electrons to complete its octet. Thus it acts as lewis acid.[tex]OH^-[/tex] acts as lewis base as it donates lone pair of electrons to electron deficient specie [tex]H^+[/tex].

2. [tex]Cl^-+BCl_3\rightarrow BCl_4^-[/tex]

As [tex]BCl_3[/tex] is short of two electrons to complete its octet. Thus it acts as lewis acid. [tex]Cl^-[/tex] acts as lewis base as it donates lone pair of electrons to electron deficient specie [tex]BCl_3[/tex].

3. [tex]K^++6H_2O\rightarrow K(H_2O)_6[/tex]

As [tex]K^+[/tex] is short of electrons to complete its octet. Thus it acts as lewis acid. [tex]H_2O[/tex] acts as lewis base as it donates lone pair of electrons to electron deficient specie [tex]K^+[/tex].

Answer:

Explanation:

NH3 + H3O+ --> NH4+ + H2O

equllibrium constant =K = [ H2O] [NH4+] / [NH3] [H3O+ ]

                                      =

by inserting thier respecive values can you calcaulte, by the way coniseder  [ H2O] =1 ,

The voltage of an electrolytic cell with copper and magnesium electrodes is 2.71 v. Therefore, option B is correct.

The electrolytic cell is a type of cell that performs a redox reaction while using electrical energy. When electrical energy is applied, a redox reaction occurs in molten NaCl. It is therefore an electrolytic cell.

An electrolyte, two electrodes, and an electrolytic cell make up an electrolytic cell (a cathode and an anode). The electrolyte is typically a mixture of ions that have been dissolved in water or another solvent. Electrolytes can also be molten salts, like sodium chloride.

The standard reduction potential, E° of the metals are as below:

Mg²⁺ + 2e⁻ ⇌  Mg; E° = -2.372

Cu²⁺ + 2e⁻ ⇌  Cu; E° = +0.337

Therefore, magnesium has the the lower E°, it will serve as the anode in the electrolytic cell while copper will serve as the cathode.

At the anode; Mg ⇌  Mg²⁺ + 2e⁻, E° = -2.372

At the cathode; Cu²⁺ + 2e⁻ ⇌  Cu, E° = +0.337

EMF of the cell = E° cathode - E° anode

= 0.337 - (-2.372) = 2.71 V

Therefore, EMF of the cell is 2.71 V

Thus, option B is correct.

To learn more about the electrolytic cell, follow the link;

https://brainly.com/question/4030224

#SPJ1

Answer:

Final temperature of the solution = 26.43°C

Explanation:

Concentration of HCl = 0.662 M, Volume = 200 mL= 0.200 L

Concentration of Ba(OH)₂ = 0.331 M, Volume = 200 mL = 0.200 L

Initial temperature of solution = 22.00°C

Specific Heat capacity of water = 4.184 J/g°C

Heat of neutralization = -56.3 KJ/mol of H₂O produced.

The full calculations is found in the attachment below

Answer:

Explanation:

ratio of  moles of N and O in molecule =

N / O = 2.17 / 4.35

1/2

empirical formula = NO₂

Answer: 0.28 M ammonia + 0.35 M ammonium nitrate and 0.15 M nitrous acid + 0.14 M potassium nitrite

Explanation:

Buffer solution is the solution which resists the change in the magnitude of the pH when small additions of either acid or base is added.  

Acidic Buffer solutions consist of weak acid and its conjugate base usually mixed in relatively equal and large quantities.

Basic Buffer solutions consist of weak base and its conjugate acid usually mixed in relatively equal and large quantities.

Thus 0.28 M ammonia + 0.35 M ammonium nitrate ( weak base + conjugate acid)  and 0.15 M nitrous acid + 0.14 M potassium nitrite (weak acid + conjugate base)  are good buffer systems

The aqueous solutions that are good buffer systems are:

We want to determine which of the given solutions would make a good buffer.

A buffer is a solution used to resist abrupt changes in pH when an acid or a base is added.

Which of the following aqueous solutions are good buffer systems?

The aqueous solutions that are good buffer systems are:

Learn more about buffers here: brainly.com/question/24188850

Answer:

[tex]\Delta H=1962.3J[/tex]

Explanation:

Hello,

In this case, we can compute the change in the solution enthalpy by using the following formula:

[tex]\Delta H=mC\Delta T[/tex]

Whereas the mass of the solution is 350 g, the specific heat capacity is 4.184 J/g °C and the change in the temperature is 1.34 °C, therefore, we obtain:

[tex]\Delta H=350g*4.184\frac{J}{g\°C} *1.34\°C\\\\\Delta H=1962.3J[/tex]

It is important to notice that the mass is just 350 g that is the reacting amount and by means of the law of the conservation of mass, the total mass will remain constant, for that reason we compute the change in the enthalpy as shown above, which is positive due to the temperature raise.

Best regards.

Answer:

0.032moles

Explanation:

2.10moles in 1000ml what about 15.25ml

(15.25×2.10)÷1000

0.032moles

Answer:

sodium chloride can be used as salt

extraction sodium metal by electrolysis

a common chemical in laboratory experiments

Answer:

sodium chloride can be used as preservatives,

in preserving foods.

Answer:

The coordination number is 4.  

Explanation:

Answer:

The correct IUPAC name for the organic reactant is :

d) 3-methylbutene

Explanation:

Firstly the  missing diagram is attached in the diagram below.

The objective of this question is to draw the major organic product and select the correct IUPAC name for the organic reactant. If there is more than one major product, both may be drawn.

From the image attached below; we would see the reaction that occurs between the alkene and the HBr (hydrobromic acid). What really occur in the reaction is that; in the presence of HBr with an alkene compound a secondary 2° carbocation is usually formed. This secondary 2° carbocation formed is usually unstable, so what we called an hydride shift occurs (Markovnikov's product) here to form a stable tertiary 3° carbocation.

The correct IUPAC name for the organic reactant is : 3-methylbutene

Answer:

Option D

Explanation:

A mechanical wave is a wave of energy that can travel long distances and could go through characteristics of matter such as solids, liquids, and gases. Mechanical waves can also travel through vacuums. A good example of a mechanical wave would be sound, sound is a wave spread through a object and can go through different types of matter. Which is why your answer is option D "sunshine." Light cannot go through a vacuum while sounds, and water can.

Hope this helps.

The mechanical wave example does not include the sunshine

It is the wave of energy that can travel long distances and considered the characteristics of matter like solids, liquids, and gases. It can also travel via vacuums. The Light cannot go via a vacuum while sounds, and water can go.

Learn more about sound here:https://brainly.com/question/16750970