Identify each definition that applies to the compound in red. Check all that apply. Upper M g (upper O upper H) subscript 2 in red plus upper H subscript 2 upper S upper O subscript 4 right arrow 2 upper H subscript 2 upper O plus upper M g upper S upper O subscript 4.

69.45 ml of 0.0887 m Mgcl2 solution is needed to make 275.0 ml of 0.0224 m Mgcl2 solution

A combination of one or even more solutes that have been dissolved into a solvent is referred to as a solution. To create a homogenous mixture, a solute must be completely dissolve in a solvent.

V1M1 = V2M2

Where,

V1 = volume of first solution = V1

V2 = volume of second solution = 275.0 ml

M1 = molarity of first solution = 0.0887 M

M2 = molarity of second solution = 0.0224 M

On putting values we get -

V1M1 = V2M2

V1 × 0.0887 = 275.0 × 0.0224

V1 = 6.16 / 0.0887

V1 = 69.45 ml

To know more about solution visit :

https://brainly.com/question/13812915

#SPJ4

A phase change in which heat is transferred from the surroundings to the system is endothermic. The phase change that involves the transfer of heat from the surroundings to the system is melting.

Melting is the process of a solid turning into a liquid, which requires energy, in the form of heat, to be added to the system in order to overcome the forces holding the solid particles together. This is why melting is an endothermic process, which means that heat is absorbed from the surroundings.

Melting is a phase change in which a solid turns into a liquid. During this process, energy is required to break the forces holding the solid particles together. This energy is in the form of heat, which is transferred from the surroundings to the system, making melting an endothermic process. The opposite of this process is freezing, where a liquid turns into a solid, this process releases heat to the surroundings, making it exothermic. The endothermic process of melting is also called fusion, and the exothermic process of freezing is also called solidification.

To know more about endothermic reaction, refer:

https://brainly.com/question/29769019

1. When we convert 4394 mL to qts, the result obtained is 4.658 qts (4th Option)

2. When we convert 71.8 lb to g, the result obtained is 3.26×10⁴ g (1st option)

First, we shall convert 4394 mL to liters (L). Details below

1000 mL = 1 L

Therefore,

4394 mL = (4394 mL × 1 L) / 1000 mL

4394 mL = 4.394 L

Finally, we shall convert 4394 mL (i.e 4.394 L) to qts. This is shown below:

1 L = 1.06 qt

Therefore,

4.394 L = (4.394 L × 1.06 qts) / 1 L

4.394 L = 4.658 qts

Thus, we can conclude that 4394 mL is equivalent to 4.658 qts (4th Option)

We can convert 71.8 lb to grams (g) as illustrated below

1 lb = 453.6 g

Therefore,

71.8 lb = (71.8 × 453.6 g) / 1 lb

71.8 lb = 3.26×10⁴ g

Thus, we can conclude that 71.8 lb is equivalent to 3.26×10⁴ g (1st option)

Learn more about conversion:

https://brainly.com/question/29421335

#SPJ1

Coefficients and Subscripts The numbers in front of the molecule are called coefficients. Subscripts are the lower numerals that follow atoms.

Equations for balancing. To balance a chemical equation, you cannot modify the subscripts in a chemical formula; only the coefficients can be changed. Changing the subscripts alters the atom ratios of the molecule and hence the chemical characteristics. When balancing an equation, you can only alter the coefficients (the numbers in front of molecules or atoms).

To balance a chemical equation, add coefficients to the symbols or formulae as needed so that the same number of each type of atom appears in both reactants and products.

To learn more about Coefficients and Subscripts to refer:

https://brainly.com/question/12645074

#SPJ4

In a drag race, the force delivered to the automobile is twice by the driver pushing on the gas pedal, based on the connection of the variables in Newton's second law.

The car's acceleration will double.

The car's mass will stay constant.

The car's velocity will rise.

Remember that the force on an item is linked to its mass and acceleration by the formula F = ma, where m is the object's mass and an is its acceleration. What happens when we multiply F by two? You might recall from algebra that if we double one side, we must also double the other, so our equation becomes 2F = 2ma. This is necessary to maintain our equality. Either the mass has doubled or the acceleration has doubled, depending on your perspective.

We can tell right away that it would be ridiculous if a race car's mass doubled with every pedal press, so the quantity that is doubling must be the acceleration. The new velocity of the car will be determined by adding the doubled acceleration to its current velocity, v1, which we shall refer to as. V = v1 + 2a in mathematics.

Learn more about Newton's second law of motion at:

https://brainly.com/question/20857831

#SPJ1

Positively charged metal ions.

Metallic bonding is a type of chemical bonding caused by the electrostatic attraction of conduction electrons (in the form of an electron cloud of delocalized electrons) to positively charged metal ions.

As chemistry matured into a discipline, it became obvious that metals dominated the periodic table of elements, and significant progress was made in the description of the salts that may be generated in interactions with acids. With the advent of electrochemistry, it became known that metals normally enter solution as positively charged ions, and the oxidation processes of the metals in their electrochemical series were well recognized. Metals were shown as positive ions bound together by an ocean of negative electrons.

To learn more about metal bonding to refer:

https://brainly.com/question/29762857

#SPJ4

The equilibrium constant, Kp, for a reaction can be determined by using the equilibrium concentrations (or partial pressures) of the reactants and products.

The equation for the equilibrium constant, Kp, for the reaction is:

Kp = [tex](PNH3)^2 * PCO2 / (PH2NCO2)^2[/tex]

In this case, the pressure of the solid ammonium carbamate is zero since it sublimes, and the total pressure is given as 0.116 atm.

So the total pressure of the gases, NH3 and CO2, at equilibrium is 0.116 atm.

Since we don't know the individual pressures of each gas we can assume that the pressure of NH3 is x and the pressure of CO2 is (0.116-x) atm.

Therefore, the equilibrium constant, Kp, is equal to  [tex](x)^2 * (0.116-x) / (0)^2 = x^2 * (0.116-x)[/tex]  

Note that in order to calculate the exact value of Kp, the concentrations or partial pressures of each gas at equilibrium need to be known.

But since it is not provided and we don't know the individual pressures of each gas we can only find the expression for Kp.

To learn more about Equilibrium Constant,

https://brainly.com/question/19340344

#SPJ4

Non-polar molecules are less effective at "sticking" than polar molecules.

Nonpolar molecules are less effective at "sticking" than polar molecules because they lack dipoles that can form positive and negative ends held together by dipole-dipole interactions. The inter-dipole interactions between these instantaneous dipoles are known as dispersion forces. These forces, also called van der Waals forces, help neutral atoms and nonpolar molecules attract each other. Polar molecules differ from non-polar molecules in that they have positive and negative ends and strong intermolecular attractive forces. Non-polar molecules are less effective at "sticking" than polar molecules.

Learn more about Polar Molecules

brainly.com/question/1581321

#SPJ4

The amount of sodium sulfide is formed when 1.25 g of hydrogen sulfide is bubbled into a solution containing 2.00 g of sodium hydroxide, at 92.0% yield  is found as 0.897 g

Avogadro's number (6.022 x 1023) of molecules (or formula units) make up one mole of a substance (ionic compound). The mass of 1 mole of a chemical is indicated by its molar mass. It provides you with the amount of grammes per mole of a substance, to put it another way.

2NaOH + H2S => Na2S + 2H2O

Moles = Mass/ Molar mass;

The molar mass of hydrogen sulphide is 34 g/mol.

              moles => 1.25/34 => 0.036mol

The molar mass of sodium hydroxide is 40 g/mol.

             moles=> 2/40 => 0.05mol

The stoichiometric coefficient of NaOH is 2

                moles of NaOH = 0.05/2 = 0.025 mol

The mass of NaOH used => 0.025 x 40 => 1g

The molar mass of Na2S = 78 g/mol

Based on balanced reaction, 80 grams of NaOH will give 78 g of Na2S.

             => 1g of NaOH => 78 x1/80 => 0.975g of Na2S

92 % of 0.975 = > 0.897 g of Na2S.

Learn more about molar mass here:

brainly.com/question/12127540

#SPJ4

To calculate the pH of this solution, we must use the equation pH = -log[H3O+], which yields a pH of 1.834.

pH is a measure of the acidity or alkalinity of a solution. It is measured on a scale from 0 to 14, with lower numbers indicating an acidic solution and higher numbers indicating a basic or alkaline solution.

The chemical equation for the dissociation of H3C6H5O7 is:

H3C6H5O7 + H2O <=> H3O+ + H2C6H5O7-

The first dissociation of H3C6H5O7 produces one H3O+ ion for every H2C6H5O7- ion. Therefore, the [H3O+] is equal to the molar concentration of the acid, which is 0.145M.

To calculate the pH of this solution, we must use the equation pH = -log[H3O+], which yields a pH of 1.834.

To learn more about pH
https://brainly.com/question/27648332
#SPJ4

a) A triplet is observed in the proton NMR spectrum when three protons are chemically identical and are in a magnetic environment that is equivalent. This usually occurs when there are three protons on adjacent carbons.

b) A septet is observed in the proton NMR spectrum when seven protons are chemically identical and are in a magnetic environment that is equivalent. This usually occurs when there are seven protons on adjacent carbons.

c) A singlet is observed in the proton NMR spectrum when there is only one proton present in the molecule.

d) A doublet is observed in the proton NMR spectrum when two protons are chemically identical and are in a magnetic environment that is equivalent. This usually occurs when there are two protons on adjacent carbons.

e) A quartet is observed in the proton NMR spectrum when four protons are chemically identical and are in a magnetic environment that is equivalent. This usually occurs when there are four protons on adjacent carbons.

Read more about NMR:

https://brainly.com/question/17564948

#SPJ4

The empirical formula of the oxide would be [tex]BiO_3[/tex].

The empirical formula of a compound is the chemical formula showing the component atoms of the compound in their simplest, whole-number ratio.

The compound in question contains bismuth and oxygen.

Mass of bismuth + oxygen = 10.28 g

Mass of bismuth = 8.3 g

Mass of oxygen = mass of bismuth + oxygen - mass of bismuth

                          = 10.28 - 8.3 = 1.98 grams

Moles of each atom:

Bismuth = 8.3/209 = 0.04 mol

Oxygen = 1.98/16 = 0.12 mol

Divide by the smallest mole:

Bismuth = 0.04/0.04 = 1

Oxygen = 0.12/0.04 = 3

Thus, the empirical formula of the oxide is [tex]BiO_3[/tex].

More on empirical formulas can be found here: https://brainly.com/question/14425626

#SPJ1

Find the empirical formula of the oxide when 10.28 g bismuth oxide contains 8.3 g bismuth.

In their laboratory in Paris, Marie and Pierre Curie were able to successfully separate radioactive radium salts from the mineral pitchblende. In 1898, the Curies' study of pitchblende led to the discovery of the elements radium and polonium.

The majority of radium's functions have been replaced by those of other radioactive substances or radiation-emitting machinery. Radium is still utilized today, but, in a few different contexts, like industrial radiography.

Scientists and medical experts eventually understood that the ailments of these individuals were being brought on by internal contamination as from radium they swallowed. On watch and clock dials, radium was no longer utilized by the 1970s.

To know more about Radium visit:

https://brainly.com/question/19471276

#SPJ4

The side of the ladder are made up of alternating sugar and phosphate molecules the steps of the ladder are made up of bases held together by hydrogen bonds.

The fundamental unit of DNA is referred to as a nucleotide. One sugar molecule, one phosphate molecule, and one of the four bases make up a nucleotide. DNA's nucleotides align to form two lengthy backbones that resemble a ladder's handrails in the shape of sugar and phosphate molecules. Between the sugar molecules on the two handrails, two bases combine to form the ladder's rungs. The "rungs" between the phosphate molecules are absent. This was significant to Watson and Crick since it enabled them to understand the formation of the double helix.

James Watson and Francis Crick discovered the DNA structure in 1953. A double helix, often known as a twisted ladder, is the structure. Sugar and phosphate molecules alternately make up the sides of the ladder. Hydrogen bonds serve as a flimsy means of holding the two sides of the DNA ladder together.

To know more about the structure of DNA, refer to the following link:

https://brainly.com/question/14537776

#SPJ4

This type of reaction between potassium carbonate (k2co3) and nitric acid (HNO3) is Acid-base neutralization reaction.

2HNO3+K2CO3⇒ 2KNO3+H2O+CO2

Potassium carbonate is a weak base whereas Nitric acid is a very strong acid. The reaction between them neutralizes each other forming water. The weak nitric acid reacts with the strong potassium base to produce salt, water and carbon dioxide which is given off.

Molecular ratio of reactants is 2 : 1.

All phases are represented in the equation: aq for aqueous, l for liquid and g for gas (notice how they are written in subscript).

The reaction is an acid-base neutralization reaction.

Learn more neutralization reaction:

brainly.com/question/28970253

#SPJ4

The combination of the n and l represent the real orbitals the impossible one  is 2d . It will not occur as orbital in electronic configuration.

1) 1s = In the electronic configuration it occurs as a orbital. This means it represent the real orbitals.  

2) 2p =  In the electronic configuration it occurs as a orbital. This means it represent the real orbitals.  

3) 4s =  In the electronic configuration it occurs as a orbital. This means it represent the real orbitals.  

4) 2d =  In the electronic configuration it not occurs as a orbital. This means it is not  represent the real orbitals.  

To learn more about orbital here

https://brainly.com/question/12865151

#SPJ4

The molar mass of the compound as shown is 46 g/mol.

We know that the molar mass is the mass of one mole of the substance. In the case of the compound that we have here we have to find out what the molar mass of the compound is.

First, we have to know the relative atomic mass of each of the atoms in the compound. We have that;

Mass of the lithium = 7

Mass of sulfur = 32

Then we would have;

Relative atomic mass = 2(7) + 32 = 46 g/mol

The compound would then has a mass of 46 grams per mole.

Learn more about relative atomic mass:https://brainly.com/question/25698972

#SPJ1

In order from most basic to most acidic:

0.0023 M  HCl

pH = 5.45 and pOH = 8.55

0.0018 M  KOH

The hydrogen ion concentration of a solution, which is a measure of its acidity, determines the solution's pH. Pure water slightly separates into ions of hydrogen and hydroxyl (OH) in equal amounts. A substance's acid content is described. A chemical called an acid reacts with specific metals to create salts by releasing hydrogen ions into the water. Acidity is measured on a pH scale. A pH value between 7 and 0 denotes increasing acidity, while a pH value between 7 and 7 denotes neutrality.

Here,

Options are

pOH = 8.55    

pH= 5.45  

0.0023 M HCl                    

0.0018 M KOH

For pOH = 8.55

use equation A

pH + 8.55 = 14

pH = 5.45

For pH = 5.45

pH = 5.45

For 0.0023 M  HCl

pH = - log (Molarity)

pH = - log (0.0023)

pH = - (-2.64)

pH = 2.64

For 0.0018 M  KOH

pOH = - log (Molarity)

pOH = - log (0.0018)

pOH = 2.74

pH + 2.74 = 14

pH = 11.26

From the most basic to the acidic, in order:

0.0023 M  HCl

pH = 5.45 and pOH = 8.55

0.0018 M  KOH

To know more about acidity of solution,

https://brainly.com/question/15019567

#SPJ4

Energy balance on Earth. You are aware that the Earth's surface equally absorbs and emits radiation. At 255F o (-18°C or 0°F), the rate of Humanity's emission and absorption are balanced.

While some atmospheric gases absorb certain wavelengths of radiation, converting their energy into heat, other gases are transparent, allowing radiation to travel freely through them without being absorbed.

"An expected result of rising levels of air pollution, particularly those from carbon dioxide, methanol, aerosol, and black carbon particles, is the energy imbalance. These contaminants increase solar absorption and prevent heat radiation from the Earth from escaping into space "Jim Hansen from NASA's Goddard Space Flight Center.

To know more about balance visit:

https://brainly.com/question/626780

#SPJ4

The Option d) Adding an acid or basic to the solvent is the proper choice. The safety video suggests mixing an acid or a basic with a solvent as the best practice.

Many reactions are made easier by solvents, which are substances that dissolves solutes and create solutions. They are utilized for a variety of tasks, including dry cleaning, painting, and extractions. They can be as toxic as dichloromethane or as harmless as water.

A substance that is used for a solution is called a and (from the Latin solv, "one, untie, solve"). Solutes can also be supercritical fluids, solids, or gases in secondary to being liquids.

To know more about Solvents visit :

https://brainly.com/question/28174309

#SPJ4

The Complete Question :

Which is the best practice recommended in the safety video to mix an acid or a base with a solvent?

a) you pour them at the same time

b) the order is irrelevant

c) add solvent to the acid or base

d) add acid or base to the solvent

Adding an acid or basic to the solvent is the proper choice. The safety video suggests mixing an acid or a basic with a solvent as the best practice.

Many reactions are made easier by solvents, which are substances that dissolves solutes and create solutions. They are utilized for a variety of tasks, including dry cleaning, painting, and extractions. They can be as toxic as dichloromethane or as harmless as water.

A substance that is used for a solution is called a and (from the Latin solv, "one, untie, solve"). Solutes can also be supercritical fluids, solids, or gases in secondary to being liquids.

To know more about solvents refer to :

brainly.com/question/28174309

#SPJ4

The Complete question is as follows:

Which is the best practice recommended in the safety video to mix an acid or a base with a solvent?

a) you pour them at the same time

b) the order is irrelevant

c) add solvent to the acid or base

d) add acid or base to the solvent

An intensive property is a physical characteristic that occurs as a substance's quantity of matter varies. While an extensive property is a change in a substance's amount of matter.

When a characteristic remains unaffected by the mass of an element or system, it is classified as intense. Density (D), pressure (P), and temperature (T) are a few characteristics of strong characteristics (r).

The sample size utilized to test the attribute has no bearing because intense qualities are bulk independent. A sample of liquid water, for instance, has the same density whether that it's in the form of a tumbler or a cubed foot. It is a priceless asset.

To know more about intensive property visit:

https://brainly.com/question/1496355

#SPJ4

11.4 g of hydrazine can be produced from 19.2 g of ammonia.

Hydrazine is a colorless, flammable chemical compound with a strong odor.

To solve this problem, you first need to calculate the percent composition of nitrogen in both ammonia and hydrazine. The percent composition of nitrogen in ammonia is 17.03%. The percent composition of nitrogen in hydrazine is 28.57%.
Next you need to calculate the amount of nitrogen in 19.2 g of ammonia. This is done by multiplying 19.2 g by the percent composition of nitrogen in ammonia, which is 17.03%. This gives you 3.26 g of nitrogen.
Now you need to calculate how much hydrazine can be produced from 3.26 g of nitrogen. This is done by dividing 3.26 g of nitrogen by the percent composition of nitrogen in hydrazine, which is 28.57%. This gives you 11.4 g of hydrazine.
Therefore, 11.4 g of hydrazine can be produced from 19.2 g of ammonia.

To learn more about hydrazine

https://brainly.com/question/14253477
#SPJ4

The pennies contain a lot of copper thus they are called "coppers".

The coins are used as money. They can be looked upon as metallic money. The pennies are one of the coins that we have and they are therefore a unit of money.

The pennies are composed mostly of copper. The full components of the pennies are; 95% copper and 5% tin and zin. It is thus clear that in the penny coin, the metal that has the greatest percentage is copper hence they are called "coppers".

Learn more about copper coins:https://brainly.com/question/21363167

#SPJ1

Answer:

Below

Explanation:

From periodic table

Mole wt of  K = 39.098

                   H =1.008

                   O=15.999       total wt per mole KOH  = 56.105 gm/mole

75.05 gm  /   56.105 gm/mole =  1.34 moles of KOH

The mass of KCl produced is equal to 0.020 mol of KCl multiplied by the molar mass of KCl (74.55 g/mol), which is 1.491 g.

Molar mass is the mass of one mole of a substance, and it is expressed in grams per mole (g/mol). It is calculated by summing the relative atomic masses of all the atoms in a molecule. The molar mass of a compound can be used to calculate the amount of a substance in moles, using the formula: moles = mass (g) / molar mass (g/mol). Knowing the molar mass of a substance can be useful in many areas of chemistry, such as stoichiometry calculations and determining the mass percent composition of a compound.

When heated, 2.5 g of KClO3 completely decomposes to KCl and O2.
Since the molar mass of KClO3 is 122.55 g/mol, 2.5 g of KClO3 is equal to 0.020 mol.
Since the reaction is 2KClO3 --> 2KCl + 3O2, 0.020 mol of KClO3 produces 0.030 mol of O2.
The mass of O2 produced is therefore equal to 0.030 mol of O2 multiplied by the molar mass of O2 (32.00 g/mol), which is 0.960 g.
The mass of KCl produced is equal to 0.020 mol of KCl multiplied by the molar mass of KCl (74.55 g/mol), which is 1.491 g.

To learn more about molar mass
https://brainly.com/question/24236159
#SPJ4

There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, A is 64, Z is 28 and X is Ni.

Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.

The balanced equation for the beta decay of ⁶⁴₂₉Cu.

⁶⁴₂₉Cu    [tex]\rightarrow[/tex]₂₈⁶⁴Ni     +   ⁰₋₁e

The atomic number, Z, refers to the number of protons inside the element as well as its identity. A refers to the mass number, that signifies the number is protons plus neutrons. The element's chemical symbol is X.

Therefore, A is 64, Z is 28 and X is Ni.

To know more about nuclear decay, here:

brainly.com/question/21114779

#SPJ1

It is clear that the hydroxide ion the primary potassium hydroxide ions will convert in the case of a simple hydrocarbon ketone in a complexation solvent, for instance.

Methyl ester is meant to be used as an alternative to petroleum-based diesel fuel or it can be merged with diesel fuel in any amount to create "biodiesel," which is usually thought to be more environmentally benign.

A particular class of three fatty acid chains called monoalkyl ester (FAME) is produced by transesterifying lipids with methanol. The main molecules for biodiesel are FAME, which are typically produced by transesterifying vegetable oils.

Among the various types of fatty acid esters, fatty acid methyl additives (FAME) are a product created by transesterifying lipids using methanol. The main molecules in biofuels are FAME, which are typically produced by transesterifying vegetable oils. Detergents and biodiesel are made with them. The most common way to make methyl esters is by acid-catalyzed reactions with methanol. This method's main benefit is that free acids are simultaneously esterified and bound acids,

To know more about hydrocarbon ketone visit :

https://brainly.com/question/23792559

#SPJ4

Answer:Our formula for percent composition is:

Molar mass of element

----------------------------------- x 100

Molar mass of compound

So, lets find the molar mass of the compound as a whole before we begin. We do this by adding atomic masses from the periodic table.

Ca: 40.078

S: 32.065

O4: 63.996 (15.999 x 4)

To find our total mass, all we need to do is add those numbers together! Our molar mass of CaSO4 is 136.139 g/mol.

Now, lets use those individual masses and our total mass in the equation to find the percent composition of each element.

Ca: 40.078

      ----------        equals .294, and when we multiply that by 100 we get 29.44%

       136.139

The percent composition of calcium in CaSO4 is 29.44%.

S: 32.065

    -------------  equals .235, and when we multiply that by 100 we get 23.55%

     136.139

The percent composition of S in CaSO4 is 23.55%.

O4: 63.996

      -------------  equals .470, and when we multiply that by 100 we get 47.0%

       136.139

The percent composition of O4 in CaSO4 is 47%.

Hope this helps!

0.12% of the substance is ionic characters, and metallic interatomic bonds would be present.

Calculating the difference in electronic configuration between the two atoms using the formula = B A is one method of determining the ionic quality of a bond, or the extent of the ionic conductivity in a polar covalent connection.

The disparity in electronegativities determines how ionic. The stronger the bond, or greater inclination to attract electrons, the greater the binding energy. The least inorganic bonds are those comprised of two non-metals, and the closer two non-metals' electronegativity values are to one another, the smaller the percentage of ionic character will be.

%ic interatomic bond = [1 - e^-(XA - XB)^2/4] * 100%

XA = electronegativity of Ti

= 1.61

XB = electronegativity of Al

= 1.54

Substituting values;

= [1 - e^-(1.61 - 1.54)^2/4] * 100%

%ic interatomic bond = 0.12%

To know more about ionic character visit:

https://brainly.com/question/10889818

#SPJ4

Answer:

B (ionic bond)

Explanation:

Because it is! :)