Identify the sampling techniques used in each of the following experiments as simple random or stratified, cluster or systematic. a. A professor s its 500 students randomly, in order to study the student life at SMSU. b. In order to study the safety of a road crossing, an investigator asks every 20 th person crossing the road to fill a survey. c. In order to study the daily consumer spending in Walmart stores, a researcher selects 8 stores randomly and records the amount each consumer spent at the store. d. A random samples of 25 males and 30 females are selected form SMS dorms. c. In order to study the opinion on U.S. economy, a firm selects samples of size 1000 from each state.

Answers

Answer 1

In the following experiments, different sampling techniques are employed to gather data. They are as follows :

a. Simple Random Sampling

b. Systematic Sampling

c. Cluster Sampling

d. Stratified Sampling

e. Multistage Sampling

a. Simple random sampling: The professor selects the students randomly from the entire population of 500 students.

b. Systematic sampling: The investigator selects every 20th person crossing the road to participate in the survey.

c. Cluster sampling: The researcher randomly selects 8 stores out of all Walmart stores and records consumer spending in those selected stores.

d. Stratified sampling: The researcher selects random samples of 25 males and 30 females from the population of SMS dorms, ensuring representation from both genders.

e. Cluster sampling: The firm selects samples of size 1000 from each state, treating each state as a separate cluster.

To know more about the sampling techniques refer here,

https://brainly.com/question/31039476#

#SPJ11


Related Questions

Euler equations are based on the following assumptions: . The column is perfectly straight, with no initial crookedness. . The load is axial, with no eccentricity. . The column is pinned at both ends. For this reason, what are we doing to correct the calculation? a) Use flange b) Using the effective length c)Use slenderness ratio d)Use buckling

Answers

The correct answer is b) Using the effective length. Option B is correct.

The effective length is used to correct the calculation in Euler equations when the column is pinned at both ends. Euler equations assume a perfectly straight column with no initial crookedness and axial load with no eccentricity. However, in reality, these assumptions may not hold true, and the column may have some initial imperfections or eccentric loading.

To account for these factors, the effective length is used. It is a concept that takes into consideration the actual support conditions and behavior of the column. The effective length is shorter than the actual length of the column and is determined based on the support conditions. It is used to calculate the critical buckling load and determine the column's stability.

By using the effective length, the calculations can be adjusted to reflect the real-world conditions and provide more accurate results. This helps in ensuring the structural integrity and safety of the column under different loading conditions.

Know more about Euler equations here:

https://brainly.com/question/32807007

#SPJ11

solve with quadratic equation (7-3x)²=9/16​

Answers

Answer:  x= 25/12 x = 31/12

The solution to the quadratic equation [tex](7-3x)^2 = 9/16[/tex]  is  [tex]x = 3/7[/tex] and [tex]x = 13/7[/tex].

To solve the equation [tex](7-3x)^2= 9/16[/tex]

taking the square root of both sides to eliminate the square.

[tex]7 - 3x = \pm\sqrt{9/16}[/tex]

[tex]7 - 3x = \pm3/4[/tex]\

[tex]-3x = -7 \pm 3/4[/tex]

Dividing both sides by -3

[tex]x = (7\pm 3/4)/3.[/tex]

Simplifying

[tex]x = 3/7 \ and\ x = 13/7[/tex]

Therefore , the quadratic equation [tex](7-3x)^2 = 9/16[/tex]  is  [tex]x = 3/7[/tex] and [tex]x = 13/7[/tex].

To learn more about quadratic equations.

https://brainly.com/question/31505137

Pen A B C Length (1) 12 m 8 m 6 m Breadth (b) 2 m 3 m 4 m (i) Which pen would take most fencing? (ii) Which pen would you like to minimize the cost of fencing? ​

Answers

(i) Pen A would take the most fencing.

(ii) Pen C would be the preferred option to minimize the cost of fencing.

(i) For calculating the total fencing, we need to find the perimeter of each pen by using the formula

P = 2(l + b), where P is the perimeter, l is the length and b is the breadth.

Pen A: P = 2(12 + 2) = 28 m

Pen B: P = 2(8 + 3) = 22 m

Pen C: P = 2(6 + 4) = 20 m

Thus, Pen A requires the most fencing.

(ii) To minimize the cost of fencing, we should choose the pen with the smallest perimeter. Here, Pen C has the smallest perimeter, so it would minimize the cost of fencing.

for such more questions on cost

https://brainly.com/question/2292799

#SPJ8

Find the area bounded by \( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \), and \( y=0 \). (Round the answer to four decimal places.)

Answers

The area bounded by [tex]\( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \)[/tex], and \( y=0 \) is approximately 5.1417 sq.units.

We have to find the area bounded by [tex]\( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \), and \( y=0 \)[/tex].

To calculate the area, we will follow the steps below:

Step 1: Find the roots of the quadratic equation

Step 2: Determine if the denominator is positive or negative.

Step 3: Find the limits of integration by equating the two lines

Step 4: Integrate to find the area.

Step 1: Find the roots of the quadratic equation.

Let us find the roots of the quadratic equation [tex]\(x^{2}-x-30=0\)[/tex].

We know that the roots are [tex]\(x=6\)[/tex] and \(x=-5\).

Therefore, [tex]\( y=\frac{x-16}{(x-6)(x+5)} \)[/tex].

Step 2: Determine if the denominator is positive or negative.

The denominator is positive if \(x\) lies in the interval [tex]\((-\infty,-5)\) and \((6,\infty)\)[/tex].

The denominator is negative if \(x\) lies in the interval \((-5,6)\).

Step 3: Find the limits of integration by equating the two lines

The area bounded by the curve is equal to the integral of the curve between the limits [tex]\(x=3\)[/tex]and [tex]\(x=4\)[/tex].

Therefore, the limits of integration are 3 and 4.

To determine the limit of integration with respect to y, we will equate the curve with y=0.

Then, solve for x to find the limits of integration.

With y=0, x=16 or x=-2.

Thus, the limits of integration with respect to y are 0 and 16, which are the limits of the line x=16.

Step 4: Integrate to find the area.

Area = ∫ ₃ ⁴  ( x − 16 ) ( x − 6 ) ( x + 5 ) d x .

Let us do the integration:

( Area = [tex]\( \frac{29}{6} \ln(6) + \frac{271}{180} \ln(30) \approx 5.1417\)[/tex] (rounding off to 4 decimal places).

Thus, the area bounded by \( y=\frac{x-16}{x^{2}-1 x-30}, x=3, x=4 \), and \( y=0 \) is approximately 5.1417 sq.units.

To know more about quadratic equation, visit:

https://brainly.com/question/30098550

#SPJ11

Helppp
Replace the letter \( A \) in the integral \( \int A\left(2 x^{5}-2\right)^{4} d x \) so that the integral evaluates to \( \frac{1}{5}\left(2 x^{5}-2\right)^{5}+C \). \[ A= \] Get Help:

Answers

We can equate the terms containing x to get the value of [tex]A.2A=15A

= 15/2[/tex].

To replace the letter (A) in the integral [tex]∫A(2x5−2)4dx[/tex] so that the integral evaluates to [tex]15(2x5−2)5+C[/tex], we need to know that the following property of integration is used here: [tex]∫uⁿdu=(uⁿ⁺¹)/(n+1) +C[/tex]. Here, the value of n is equal to 4. Thus, the power of u gets incremented by 1, giving [tex](2x⁵−2)⁵[/tex]. Also, the coefficient (n+1) in the denominator will be [tex]5.A*(2x⁵−2)⁴=15(2x⁵−2)⁵ + C[/tex] Thus, we can equate the terms containing x to get the value of

[tex]A.2A=15A[/tex]

= 15/2 Thus, the value of

A = 15/2.

Now, we can replace the value of A in the given integral to get the required value of the integral. [tex]∫(15/2)(2x⁵−2)⁴ dx=[/tex] [tex](15/2)∫(2x⁵−2)⁴dx= (15/2) (1/5) (2x⁵−2)⁵+C[/tex]

[tex]=(3/2)(2x⁵−2)⁵+C[/tex]. We are given an integral [tex]∫A(2x5−2)4dx[/tex] and we need to replace the letter (A) so that the integral evaluates to [tex]15(2x5−2)5+C[/tex]. The value of [tex](2x5−2)⁵[/tex] is obtained by incrementing the power by 1 and dividing by (5+1) = 6. Thus, we have [tex](2x5−2)⁵/6[/tex] as the integrand. Now, we can equate the two given integrals and solve for A. Thus, A = 15/2. We replace the value of A in the original integral to get [tex](15/2)(2x⁵−2)⁴[/tex]. We simplify this expression to get the final value of the integral as [tex](3/2)(2x⁵−2)⁵+C.[/tex]

To know more about value visit:-

https://brainly.com/question/30145972

#SPJ11

Jacobi wants to install an underground sprinkler system in her backyard the backyard is rectangular with side length 17 m and 26 m .the water pipe will run diagonally across the yard about how many metres of water pipe does Jacobi need .

Answers

The length of the pipe required would be 31.06 meters

The length of the pipe is the hypotenus of the triangle formed :

hypotenus = √opposite² + adjacent²

substituting the values into our equation:

length of pipe = √17² + 26²

length of pipe = √965 = 31.06

Therefore, the length of the pipe needed is 31.06 meters

Learn more on length : https://brainly.com/question/2217700

#SPJ1

e demand function for a particular product is given by the function \( D(x)=\frac{-2}{9} x^{2}+400 \). Find the consumers' surplus if \( x_{E}=30 \) units.

Answers

The consumer's surplus for [tex]\(x_E = 30\)[/tex] units is [tex]\(-\frac{2000}{3}\)[/tex] or approximately [tex]\(-666.67\)[/tex] units.

To find the consumer's surplus, we first need to determine the demand function. The demand function for a particular product is given by the function [tex]\(D(x) = \frac{-2}{9}x^2 + 400\),[/tex] where [tex]\(x\)[/tex] represents the quantity of the product.

The consumer's surplus represents the difference between what consumers are willing to pay for a product and what they actually pay. Mathematically, it can be calculated by finding the area between the demand curve and the price line for a given quantity.

Given that [tex]\(x_E = 30\)[/tex] units, the consumer's surplus can be calculated as follows:

The price line for [tex]\(x_E\)[/tex] units is determined by evaluating the demand function at [tex]\(x = x_E\):[/tex]

[tex]\[P(x_E) = D(x_E) = \frac{-2}{9}(30)^2 + 400\][/tex]

To find the consumer's surplus, we need to integrate the difference between the demand function and the price line over the range [tex]\([0, x_E]\):[/tex]

[tex]\[CS = \int_{0}^{x_E} (D(x) - P(x_E)) \, dx\][/tex]

Substituting the given demand function and the price line:

[tex]\[CS = \int_{0}^{30} \left(\frac{-2}{9}x^2 + 400 - \left(\frac{-2}{9}(30)^2 + 400\right)\right) \, dx\][/tex]

Simplifying:

[tex]\[CS = \int_{0}^{30} \left(\frac{-2}{9}x^2 + 400 + \frac{2}{9}(30)^2 - 400\right) \, dx\][/tex]

[tex]\[CS = \int_{0}^{30} \left(\frac{-2}{9}x^2 + \frac{2}{9}(30)^2\right) \, dx\][/tex]

[tex]\[CS = \int_{0}^{30} \frac{-2}{9}(x^2 - (30)^2) \, dx\][/tex]

[tex]\[CS = \frac{-2}{9} \int_{0}^{30} (x^2 - 900) \, dx\][/tex]

Integrating term by term:

[tex]\[CS = \frac{-2}{9} \left(\frac{x^3}{3} - 900x\right)\Bigr|_{0}^{30}\][/tex]

Evaluating the definite integral:

[tex]\[CS = \frac{-2}{9} \left(\frac{30^3}{3} - 900 \cdot 30 - 0^3 + 900 \cdot 0\right)\][/tex]

Simplifying further:

[tex]\[CS = \frac{-2}{9} \left(30000 - 27000\right)\][/tex]

[tex]\[CS = \frac{-2}{9} \cdot 3000\][/tex]

[tex]\[CS = -\frac{2000}{3}\][/tex]

Therefore, the consumer's surplus for [tex]\(x_E = 30\)[/tex] units is [tex]\(-\frac{2000}{3}\)[/tex] or approximately [tex]\(-666.67\)[/tex] units.

To know more about surplus visit-

brainly.com/question/31401628

#SPJ11

Find the area of the region bounded by the curves y = x²(x ≥ 0), y = x²(x ≥ 0) and the line y = 2. [13 marks] Let R be the region bounded by the curve y = x² + 1 and the line y = 2x + 4. Find the volume of the solid generated by revolving the region R about the line y = -1. [17 marks]

Answers

The area of the region bounded by the curves y = x², y = 2, and the line y = 2 is (4√2/3) square units. The volume of the solid generated by revolving the region R, bounded by y = x² + 1 and y = 2x + 4, around the line y = -1 cannot be determined without additional information such as the limits of integration.

To find the area of the region bounded by the curves y = x², y = 2, and the line y = 2, we need to determine the points of intersection between these curves.

Setting y = x² and y = 2 equal to each other, we can solve for x:

x² = 2

x = ±√2

Since we are considering x ≥ 0, the region is bounded by x = 0 and x = √2.

To find the area, we integrate the difference between the upper and lower curves with respect to x:

A = ∫[0, √2] (2 - x²) dx

Evaluating the integral:

A = [2x - (x³/3)] [0, √2]

A = [2√2 - (√2)³/3] - [0 - (0)³/3]

A = [2√2 - 2√2/3] - [0 - 0/3]

A = [4√2/3]

Therefore, the area of the region bounded by the curves y = x², y = 2, and the line y = 2 is (4√2/3) square units.

Regarding the second part of the question, finding the volume of the solid generated by revolving the region R about the line y = -1 requires more information.

The given region R is bounded by the curve y = x² + 1 and the line y = 2x + 4, but it is not clear what the limits of integration are for the volume calculation. Please provide the limits of integration or any additional information needed to solve for the volume.

To know more about integration refer to-

https://brainly.com/question/31744185

#SPJ11

Let Y₁,..., Yn N(μ,0²). State the sampling distribution of Y = n=¹_₁ Y₁. -1 i=1 n1, Σ (Υ; – Υ)2. State the sampling distribution of S² = State the mean and variance of Y and S².

Answers

1. The sampling distribution of Y is a normal distribution with mean nμ and variance nσ².

2. The mean of the sampling distribution of S² is σ², and the variance is 2σ⁴ / (n-1).

In the given notation, Y₁, Y₂, ..., Yₙ are independent and identically distributed (i.i.d.) random variables following a normal distribution with mean μ and variance σ².

1. Sampling Distribution of Y = ∑(i=1 to n) Yᵢ:

The random variable Y represents the sum of n independent normal random variables. The sampling distribution of Y is also a normal distribution. The mean of the sampling distribution of Y can be obtained by the linearity of expectation:

E(Y) = E(∑(i=1 to n) Yᵢ) = ∑(i=1 to n) E(Yᵢ) = ∑(i=1 to n) μ = nμ

The variance of the sampling distribution of Y can be obtained by the linearity of variance:

Var(Y) = Var(∑(i=1 to n) Yᵢ) = ∑(i=1 to n) Var(Yᵢ) = ∑(i=1 to n) σ² = nσ²

Therefore, the sampling distribution of Y is a normal distribution with mean nμ and variance nσ².

2. Sampling Distribution of S²:

The random variable S² represents the sample variance calculated from a sample of n observations. The sampling distribution of S² follows a chi-square distribution with (n-1) degrees of freedom.The mean of the sampling distribution of S² is given by:

E(S²) = σ²

The variance of the sampling distribution of S² is given by:

Var(S²) = 2σ⁴ / (n-1)

Therefore, the mean of the sampling distribution of S² is σ², and the variance is 2σ⁴ / (n-1).

To know more about Mean refer here:

https://brainly.com/question/15323584#

#SPJ11

Solve the following LP model using graphical method: Maximize Z=x−2y
s.t.


x−y≥0
x+2y≤4
x≥0
y≥−1

Answers

The optimal solution is x = 2, y = 0, and the maximum value of Z is Z = 2 - 2(0) = 2. To solve the given linear programming (LP) model using the graphical method, we need to graphically represent the feasible region and find the optimal solution by maximizing the objective function.

Step 1: Graph the Constraints

We start by graphing each constraint individually on a coordinate plane.

The first constraint is x - y ≥ 0, which represents the line y = x. We can draw this line on the plane.

The second constraint is x + 2y ≤ 4. To graph this, we can rewrite it as 2y ≤ -x + 4 and then solve for y, which gives y ≤ (-1/2)x + 2. We can plot this line on the graph as well.

The third constraint x ≥ 0 represents the x-axis, and the fourth constraint y ≥ -1 represents the horizontal line y = -1.

Step 2: Identify the Feasible Region

The feasible region is the area where all constraints are satisfied. It is the intersection of the shaded regions formed by the constraints.

Step 3: Identify the Optimal Solution

To find the optimal solution, we need to maximize the objective function Z = x - 2y. The objective function is represented by a line with a positive slope.

By sliding the objective function line parallel to itself from left to right or right to left, we can observe the points of intersection between the objective function line and the feasible region. The point that gives the maximum value of Z within the feasible region is the optimal solution.

Step 4: Determine the Optimal Solution

By visually inspecting the graph, we can see that the objective function line will intersect the feasible region at the corner point (2, 0). This is the optimal solution for the given LP model.

Therefore, the optimal solution is x = 2, y = 0, and the maximum value of Z is Z = 2 - 2(0) = 2.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

Establish the identity. \[ (1+\sec \theta)(1-\sec \theta)=-\tan ^{2} \theta \] Multiply and write the left side expression as the difference of two squares.

Answers

We have established the identity:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(tan^2θ + sec θ) = -tan^2θ

To establish the identity, let's start with the left side of the equation:

(1 + sec θ)(1 - sec θ)

We can use the identity: sec^2θ = 1 + tan^2θ

Substituting this into the expression, we have:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(1 - sec θ) = (1 + sec θ)(1 + tan^2θ)

Now, let's write the right side expression as the difference of two squares:

(1 + sec θ)(1 + tan^2θ) = (1 + sec θ)(tan^2θ + 1)

Using the distributive property, we can expand this expression:

(1 + sec θ)(tan^2θ + 1) = tan^2θ + sec θ + tan^2θ(sec θ) + sec θ

Now, simplify the expression:

tan^2θ + sec θ + tan^2θ(sec θ) + sec θ = tan^2θ(1 + sec θ) + sec θ(1 + sec θ)

Finally, notice that (1 + sec θ) is common to both terms, so we can factor it out:

tan^2θ(1 + sec θ) + sec θ(1 + sec θ) = (1 + sec θ)(tan^2θ + sec θ)

Therefore, we have established the identity:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(tan^2θ + sec θ) = -tan^2θ

Learn more about  established from

https://brainly.com/question/441178

#SPJ11

Polygons that are similar have the same shape, but are a different size. Select one: O True O False

Answers

True.Polygons that are similar have the same shape, but are of a different size.

The relationship between corresponding angles and the corresponding side lengths of similar polygons is that they are proportional to each other. So, if a shape is enlarged or reduced, but it retains the same shape, it is considered to be similar to the original shape. Therefore, the statement is true that polygons that are similar have the same shape, but are a different size.

Let us understand polygons in detail:A polygon is a closed figure that has many sides, and it is made up of line segments that are connected end-to-end. In the plane, a polygon can be classified as a simple polygon or a complex polygon. In simple polygons, no line segment intersects another line segment that is not an endpoint of the segment.

Any polygon that is not simple is known as a complex polygon. Similarly, polygons can be classified according to their number of sides, and they are named accordingly. Triangles, quadrilaterals, pentagons, hexagons, heptagons, octagons, and so on are the most frequent polygons.

To know more about Polygons visit:

https://brainly.com/question/17756657

#SPJ11

A 675-meter bike trail passes through forest and meadows. There are six legs of the trail that cut through meadows: two legs measure
meters, three legs measure 52.25 meters, and one leg measures 32 meters. The rest of the trail passes through forest. How many meters of the trail pass through the forest?

Answers

Answer:   351.25 meters

Therefore, The Length of the trail that Passes Through the Forest is:

675  - (2 * 45  +  3  *  52.25  +  32)  =   351.25 meters

Step-by-step explanation:

Make A PLAN:

Calculate the total length of the trail that passes through the meadows and subtract the full length of the path to find the size that passes through the forest:

SOLVE THE PROBLEM:

1) - Calculate the total length of the trail that passes through the meadows:

2  *  45  +  3  *  52.25  +  32

2) - Subtract the total length of meadows from the total length of the trail:

675  - (2  *  45  +  3  *  52.25  +  32)

Draw the conclusion:

Therefore, The Length of the trail that Passes Through the Forest is:

675  - (2  *  45  +  3  *  52.25  +  32)  =   351.25 meters.

I hope this helps!

Solve the rational inequality. x−4
x+3

> x+5
x

(−[infinity],−5)∪(− 4
5

,4) (−5,[infinity])
(−5,− 4
5

)∪(4,[infinity])

(−4,− 4
5

)∪(5,[infinity])
(−5,−4)∪(− 4
5

,[infinity])

Answers

Based on the test points, we can conclude that the solution to the inequality is:

[tex]\((- \infty, -5) \cup (-5, -\frac{4}{5}) \cup (-\frac{4}{5}, 0)\)[/tex]

To solve the rational inequality [tex]\(\frac{x-4}{x+3} > \frac{x+5}{x}\),[/tex] we can begin by finding the critical points. These occur when the numerator or denominator is equal to zero.

Setting the numerator [tex]\(x-4\)[/tex] equal to zero, we find [tex]\(x = 4\).[/tex]

Setting the denominator [tex]\(x+3\)[/tex] equal to zero, we find [tex]\(x = -3\).[/tex]

Setting the denominator [tex]\(x\)[/tex] equal to zero, we find [tex]\(x = 0\).[/tex]

These critical points divide the number line into four intervals: [tex]\((- \infty, -5)\), \((-5, -4/5)\), \((-4/5, 0)\), and \((0, \infty)\).[/tex]

Next, we choose a test point from each interval and evaluate the inequality:

For the interval [tex]\((- \infty, -5)\),[/tex] let's choose [tex]\(x = -6\)[/tex]. Substituting this value into the inequality, we get [tex]\(\frac{-6-4}{-6+3} > \frac{-6+5}{-6}\),[/tex] which simplifies to [tex]\(-\frac{10}{-3} > \frac{-1}{-6}\).[/tex] This is true, so this interval satisfies the inequality.

For the interval [tex]\((-5, -4/5)\),[/tex] let's choose [tex]\(x = -1\)[/tex]. Substituting this value

into the inequality, we get [tex]\(\frac{-1-4}{-1+3} > \frac{-1+5}{-1}\),[/tex] which simplifies to [tex]\(-\frac{5}{2} > -4\).[/tex] This

is also true, so this interval satisfies the inequality.

For the interval [tex]\((-4/5, 0)\),[/tex] let's choose [tex]\(x = -\frac{1}{2}\)[/tex]. Substituting this value into

the inequality, we get [tex]\(\frac{-\frac{1}{2}-4}{-\frac{1}{2}+3} > \frac{-\frac{1}{2}+5}{-\frac{1}{2}}\),[/tex] which simplifies to [tex]\(\frac{-9}{5} > -10\).[/tex] This is

true as well, so this interval satisfies the inequality.

For the interval [tex]\((0, \infty)\),[/tex] let's choose [tex]\(x = 1\).[/tex] Substituting this value into the inequality, we get [tex]\(\frac{1-4}{1+3} > \frac{1+5}{1}\),[/tex] which simplifies to [tex]\(\frac{-3}{4} > 6\).[/tex] This is false, so this interval does not satisfy the inequality.

Based on the test points, we can conclude that the solution to the inequality is:

[tex]\((- \infty, -5) \cup (-5, -\frac{4}{5}) \cup (-\frac{4}{5}, 0)\)[/tex]

To know more about inequality visit-

brainly.com/question/29799212

#SPJ11

A researcher has conducted a market survey to test fuel efficiency performance on different brands of cars. Five cars for each brand were each test-driven in kilometers. The data obtained are as follows: Score (kilometers per liter) Total Mean Brand A 7.6 8.4 8.5 7.8 9.4 41.7 8.3 Brand B 7.8 8.0 9.2 9.5 8.6 43.2 8.6 Brand C 9.6 10.4 8.2 8.7 10.3 47.2 9.4
a) Indicate the null and alternative hypotheses. b) Compute test statistics using ANOVA (including the SST, SSA, SSW and F test). c) Identify the ANOVA procedure of whether there is enough decision to say that the means are equal (α= 0.05)

Answers

There is enough evidence to say that the means are not equal. So, we reject the null hypothesis using ANOVA.

a) The null and alternative hypotheses for this case are: Null hypothesis (H0): µ1 = µ2 = µ3, i.e., all three brands have the same mean score. Alternative hypothesis (H1): At least one of the three brands has a different mean score.

b)  The ANOVA table can be obtained from the above-given data. For calculating the test statistics, use the below-given formulas:

SSA = n (∑ni=1  x¯i2) − (∑i=1k  Xi2) SST = (∑i=1k ∑j=1n Xij2) − n (∑i=1k x¯i2) SSW = SST − SSA

F = MSS/MSE

Where, n is the number of cars in each brand,

Xi is the total score of the ith brand,

k is the number of brands,

Xij is the score of the jth car in the ith brand, and

x¯i is the mean score of the ith brand.

Here, we get: SSA = (5)(8.32) − (41.72 + 43.22 + 47.22) = 5.76 SST = (7.62 + 8.42 + 8.52 + 7.82 + 9.42 + 7.82 + 8.02 + 9.22 + 9.52 + 8.62 + 9.62 + 10.42 + 8.22 + 8.72 + 10.32) − (15)(8.352) = 60.64 SSW = 60.64 − 5.76 = 54.88 F = (5.76/2)/(54.88/12) = 5.47

c) The ANOVA procedure is to test whether the means of three or more populations are equal. We use F distribution to determine whether the means of three or more groups are equal. Here, F = 5.47 and the degree of freedom is (2, 12). The null hypothesis is rejected when the calculated value is greater than the critical value. The critical value is 3.89 at α = 0.05. Since 5.47 > 3.89, we can say that there is enough evidence to say that the means are not equal. Thus, we reject the null hypothesis.

To know more about ANOVA, visit:

https://brainly.com/question/490790

#SPJ11

Question Find dx2d2y​ if x2+3y2=−8

Answers

By using differentiation we can find that the value of dx²d²y is 3.

The equationis x² + 3y² = -8

Differentiate both sides of the equation with respect to x: 2x + 6yy' = 0

Differentiate the above equation with respect to x again:

2 + 6(y')² + 6yy'' = 0

Substitute y' = dy/dx into the equation:

2 + 6(dy/dx)² + 6yy'' = 0

Substitute the given equation x² + 3y² = -8 into the above equation:

2 + 6(dy/dx)² - 4x = 0

Differentiate the above equation once more with respect to x:

12(dy/dx)(d²y/dx²) - 4 = 0

Solve for d²y/dx²:

12(dy/dx)(d²y/dx²) = 4

Divide both sides by 12:

(dy/dx)(d²y/dx²) = 4/12

Simplify:

(dy/dx)(d²y/dx²) = 1/3

Therefore, the value of d²y/dx² is 1 divided by 3 times the derivative of y with respect to x.

learn more about Derivative here:

https://brainly.com/question/25324584

#SPJ4

4500-p² 4 The demand equation for a product is found to be a = price of the product in dollars and q is the quantity. a. Find the price elasticity of demand when the price is $40. b. Is the demand el

Answers

The demand equation for a product is a function that represents the relationship between the price of a product and the quantity demanded by consumers. The price elasticity of demand when the price is $40 is E= (40/Q) (dQ/dP) = (40/Q) (q/40) = 1 Therefore, demand is unit elastic.

The price elasticity of demand measures the responsiveness of the quantity demanded of a product to a change in its price.

It is a crucial concept in economics, particularly in understanding how consumers react to changes in prices.

To answer this question, we use the formula for price elasticity of demand:

E= (P/Q) (dQ/dP) where E is the elasticity,

P is the price of the product, Q is the quantity demanded, and

dQ/dP is the derivative of the quantity demanded with respect to the price.

Given the demand equation,

a = price of the product in dollars and q is the quantity.

Therefore, we can rewrite the equation as follows:

a = Pq Taking the derivative of both sides, we get:

da/dP

= q + P (dq/dP)  Solving for dq/dP,

we get: dq/dP

= (da/dP - q)/P

Plugging in the values, we get:

dq/dP

= (1q - 0)/40

= q/40

Hence, the price elasticity of demand when the price is $40 is

E= (40/Q) (dQ/dP)

= (40/Q) (q/40)

= 1

Therefore, demand is unit elastic.

The demand is unit elastic if the percentage change in quantity demanded is equal to the percentage change in price.

Therefore, a change in price will lead to an equal change in quantity demanded.

If the elasticity is greater than 1, the demand is elastic.

If the elasticity is less than 1, the demand is inelastic.

To know more about Equation  visit :

https://brainly.com/question/29538993

#SPJ11

The graph shows the function f(x) = |x – h| + k. What is the value of k?

Answers

The calculated value of k is -2.5

How to determine the value of k?

From the question, we have the following parameters that can be used in our computation:

The graph

(see attachment)

Also, we have

f(x) = |x - h| + k

From the graph, we have the vertex to be

(h, k) = (1, -2.5)

By comparison, we have

k = -2.5

Read mroe about functions at

https://brainly.com/question/27915724

#SPJ1

Here are the ingredients in your first recipe:

Banana Cupcakes
makes 10 cupcakes

1 cup granulated sugar

1/2 cup vegetable oil

1 large egg

4 tablespoons sour cream

2 medium-sized ripe bananas, mashed

1 1/2 cups all-purpose flour

1 teaspoon baking soda

1/8 teaspoon salt

1 teaspoon vanilla extract

pinch of nutmeg

You will use the recipe above to answer the following questions:

1. This recipe serves 10, but you need to serve 30. What number will you need to multiply the amount of each ingredient by to adjust the recipe?
2. How did you determine this number?
3. How much vegetable oil do you need for 30 cupcakes?
4. How much flour do you need for 30 cupcakes?
5. What is the difference in the amount of vanilla extract you would need for 30 cupcakes?
6. What is the difference in the amount of salt you would need for 30 cupcakes?

In the real world, even though you make adjustments to a recipe to accommodate the number of people you need to serve, you sometimes round the amount of an ingredient instead of using an exact amount. Which ingredient would it make more sense to round rather than coming up with the exact amount? Why?

Answers

Answer:

1. To adjust the recipe to serve 30 cupcakes instead of 10, you will need to multiply the amount of each ingredient by 3.

2. This number was determined by dividing the desired number of servings (30) by the original number of servings (10). 30/10 = 3.

3. For 30 cupcakes, you will need 3 times the amount of vegetable oil listed in the original recipe. The original recipe calls for 1/2 cup of vegetable oil, so for 30 cupcakes, you will need 3 * (1/2) = **1 and 1/2 cups** of vegetable oil.

4. For 30 cupcakes, you will need 3 times the amount of flour listed in the original recipe. The original recipe calls for 1 and 1/2 cups of all-purpose flour, so for 30 cupcakes, you will need 3 * (1 and 1/2) = **4 and 1/2 cups** of all-purpose flour.

5. The difference in the amount of vanilla extract you would need for 30 cupcakes is calculated by subtracting the amount needed for 10 cupcakes from the amount needed for 30 cupcakes. The original recipe calls for 1 teaspoon of vanilla extract, so for 30 cupcakes, you will need 3 * (1) = **3 teaspoons** of vanilla extract. The difference is therefore 3 - 1 = **2 teaspoons**.

6. The difference in the amount of salt you would need for 30 cupcakes is calculated by subtracting the amount needed for 10 cupcakes from the amount needed for 30 cupcakes. The original recipe calls for 1/8 teaspoon of salt, so for 30 cupcakes, you will need 3 * (1/8) = **3/8 teaspoon** of salt. The difference is therefore (3/8) - (1/8) = **2/8 or 1/4 teaspoon**.

In the real world, it would make more sense to round the amount of an ingredient like salt or nutmeg rather than coming up with the exact amount because these ingredients are used in such small quantities that a slight variation in their amounts is unlikely to have a significant impact on the final product.

Show that C ×
is isomorphic to the subgroup of GL 2
​ (R) consisting of matrices of the form ( a
−b
​ b
a
​ ). 2. Prove that (Z 8
​ ) ×
is isomorphic to the group of matrices ( 1
0
​ 0
1
​ ),( 1
0
​ 0
−1
​ ),( −1
0
​ 0
1
​ ),( −1
0
​ 0
−1
​ )

Answers

C ×is in isomorphism to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a). (Z 8​) ×is is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

To show that C ×is isomorphic to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a), we need to prove two things:

  a. The map between the two sets is a homomorphism.

  b. The map is bijective.

  Let's define the map as follows:

  f: C × → GL 2​ (R)

  f(a, b) = (a -b, b, a)

  i. Homomorphism: We can show that f is a homomorphism by verifying that f((a, b) + (c, d)) = f(a, b) * f(c, d) for all (a, b), (c, d) ∈ C ×.

  ii. Bijective: We need to show that f is both injective and surjective. Injectivity means that distinct elements in C × map to distinct elements in GL 2​ (R). Surjectivity means that every element in GL 2​ (R) has a preimage in C ×.

  By proving both the homomorphism and bijective properties, we establish the isomorphism between C × and the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a).

To prove that (Z 8​) ×is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1), we can follow a similar approach.

  Define the map as follows:

  g: (Z 8​) × → GL 2​ (R)

  g([a] 8, [b] 8) = (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1)

  Prove that g is a homomorphism and bijective to establish the isomorphism between (Z 8​) × and the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

Hence, we have shown that C ×is isomorphic to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a), and (Z 8​) ×is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

To know more about isomorphism and group theory, refer here:

https://brainly.com/question/32641367#

#SPJ11

Complete question:

Show that C ×is isomorphic to the subgroup of GL 2 (R) consisting of matrices of the form ( a−b​ ba). 2. Prove that (Z 8​ ) ×is isomorphic to the group of matrices ( 10​ 01​ ),( 10​ 0−1​ ),( −10​ 01​ ),( −10​ 0−1​ )

need help all information is in the picture. thanks!

Answers

The answer I got was ♾️ so I believe the answer would be undefined

A contour map is shown for a function f(x,y) on the rectangle R=[−3,6]×[−1,4]. a. Use the midpoint rule with m=2 and n=3 to estimate the value of ∬R​f(x,y)dA. b. Estimate the average value of the function f(x,y). fave​≈ Hint

Answers

a. The estimated value of ∬R​f(x,y)dA is 105

b. The estimated average value of the function f(x, y) is 7.

a. The rectangle R=[−3,6]×[−1,4] is divided into m = 2 subintervals along the x-axis and n = 3 subintervals along the y-axis. Therefore, each subinterval has a width of Δx = (6 - (-3))/2 = 9/2 and a height of Δy = (4 - (-1))/3 = 5/3.

We can calculate the midpoint of each subrectangle using the formula:

[tex]x_i = x_min + (i - 0.5) * \Delta x\\y_j = y_min + (j - 0.5) * \Delta y[/tex]

where i = 1, 2, ..., m and j = 1, 2, ..., n.

Using the midpoint rule, the estimate of the double integral is given by:

∬R​f(x,y)dA ≈ Δx * Δy * ∑∑[tex]f(x_i, y_j)[/tex]

where the double summation is taken over all the midpoints (x_i, y_j) of the subrectangles.

Calculate the midpoints of the subrectangles.

[tex]x_1 = -3 + (1 - 0.5) * (9/2) = -3 + 4.5 = 1.5\\x_2 = -3 + (2 - 0.5) * (9/2) = -3 + 9 = 6\\y_1 = -1 + (1 - 0.5) * (5/3) = -1 + (1/2) * (5/3) = -1 + 5/6 = -1/6\\y_2 = -1 + (2 - 0.5) * (5/3) = -1 + (3/2) * (5/3) = -1 + 5/2 = 9/2\\y_3 = -1 + (3 - 0.5) * (5/3) = -1 + (5/2) * (5/3) = -1 + 25/6 = 19/6[/tex]

Evaluate the function at each midpoint.

[tex]f(x_1, y_1) = 2\\f(x_1, y_2) = -1\\f(x_1, y_3) = 0\\f(x_2, y_1) = 1\\f(x_2, y_2) = 3\\f(x_2, y_3) = 2[/tex]

∬R​f(x,y)dA ≈ Δx * Δy * ∑∑[tex]f(x_i, y_j)[/tex]

           = (9/2) * (5/3) * (2 + (-1) + 0 + 1 + 3 + 2)

           = (9/2) * (5/3) * 7

           = 15 * 7

           =  105

b. To estimate the average value of the function f(x, y), we can divide the double integral by the area of the rectangle R, which is A = Δx * Δy * m * n.

The average value is then given by:

f_ave ≈ (∬R​f(x,y)dA) / A

Now let's perform the calculations:

Step 1: Calculate the area of the rectangle.

A = Δx * Δy * m * n

 = (9/2) * (5/3) * 2 * 3

 = 15

Step 2: Calculate the average value.

f_ave ≈ (∬R​f(x,y)dA) / A

     = 105 / 15

     = 7

Therefore, the estimated value of ∬R​f(x,y)dA is 105 and the estimated average value of the function f(x, y) is 7.

To know more about estimated value, refer here:

https://brainly.com/question/32263011

#SPJ4

∫ x 11
30(− x 10
3
−5) 4
dx 5
1
(− x 10
3
−5) 5
+C b) 5
1
(− x 10
3
−5) 5
x+C (− x 10
3
−5) 4
x+C d) 4
1
(− x 10
3
−5) 4
+C

Answers

The correct option that represents the antiderivative of the given integral ∫ [tex](x^{11}/(30(-x^{10}/3 - 5))^4) dx[/tex] is option c)[tex](-x^{10}/3 - 5)^5/(5(-x^{10}/3 - 5)^5) + C.[/tex]

To find the antiderivative of the given integral ∫ [tex](x^{11}/(30(-x^{10}/3 - 5))^4)[/tex]dx, we can simplify the expression inside the integral first.

Let's rewrite the integral as ∫ [tex](x^{11}/(30(-x^{10}/3 - 5))^4)[/tex] dx.

Now, let [tex]u = -x^{10}/3 - 5.[/tex] Taking the derivative of u with respect to x, we get:

[tex]du/dx = -10/3 * x^{(10/3 - 1)}[/tex]

[tex]= -10/3 * x^{(7/3)}[/tex]

Next, we can rewrite the integral in terms of u:

∫ [tex](x^{11}/(30(-x^{10}/3 - 5))^4) dx[/tex] = ∫ [tex](x^{11}/(30u)^4) dx.[/tex]

Substituting u and du into the integral, we get:

∫ [tex](x^{11}/(30u)^4) dx[/tex] = ∫ [tex](x^{11}/(30(-x^{10}/3 - 5))^4) dx[/tex]

= -∫[tex](1/(30u)^4) du.[/tex]

Now, we can simplify further:

-∫[tex](1/(30u)^4) du[/tex]= -∫ [tex](1/(30(-x^{10}/3 - 5))^4) du[/tex]

= -∫[tex](1/(30(-x^{10}/3 - 5))^4) (-10/3 * x^(7/3)) dx[/tex]

= 10/3 ∫ ([tex]x^{(7/3)}/(30(-x^{10}/3 - 5))^4) dx.[/tex]

Finally, we can simplify the expression inside the integral:

10/3 ∫[tex](x^{(7/3)}/(30(-x^{10}/3 - 5))^4) dx[/tex] = [tex](10/3) * (-(x^{10}/3 + 5))^5/5 + C[/tex]

[tex]= (-1/3) * (-(x^{10}/3 + 5))^5 + C.[/tex]

To know more about integral,

https://brainly.com/question/31055649

#SPJ11

Complete question:

Solve the following integrals:

∫ x 11 30(− x 10 3 −5) 4 dx 5 1 (− x 10 3 −5) 5 +C

b)∫ 5 1 (− x 10 3 −5) 5 x+C (− x 10 3 −5) 4 x+C

d)∫ 4 1 (− x 10 3 −5) 4 +C

Decide which of the following properties apply to the function. (More than one property may apply to a function. Select all that apply.) y = ln x The function is one-to-one. The domain of the function is (-0, 00). The function is a polynomial function. The graph has an asymptote. The function is increasing on its entire domain. The function is decreasing on its entire domain. The function has a turning point. The range of the function is (-00,00). 

Answers

The function y = ln x is a logarithmic function with a natural base, where the independent variable (x) is the argument of the logarithm and the dependent variable (y) is the exponent to which e (Euler's number) is raised to obtain the argument.

The function is one-to-one: A one-to-one function is a function where every distinct input has a distinct output, which means that there are no repeated values of f(x) on its domain.

If we graph the function, we can see that there is only one value of the function for each value of x, so it is a one-to-one function.The domain of the function is (-0, 00): The domain of a function is the set of all possible input values (x) for which the function is defined.

The logarithmic function is only defined for positive values of x, so the domain of ln x is (0, ∞).The function has an asymptote: An asymptote is a line that the graph of a function approaches but never touches.

The graph of y = ln x has a vertical asymptote at x = 0 because the function is undefined at x = 0, but approaches negative infinity as x approaches 0 from the right.

To know more about independent visit:

https://brainly.com/question/27765350

#SPJ11

lim (x,y)→(0,0)

x 2
+y 2

9xy

= A. −1 B. 1 C. 0 D. π E. does not exist mevcut değil

Answers

The limit does not exist. Therefore, the correct answer is (E) does not exist.

Given expression islim (x,y)→(0,0)

x 2
+y 2

9xy

We have to determine the limit of this expression as (x,y) tends to (0,0).

Let's evaluate the limit using polar coordinates:

Substituting x=r cos θ, y=r sin θ, the expression becomes:lim (r,θ)→(0,0)

(r cos θ) 2
+(r sin θ) 2

9(r cos θ)(r sin θ)

After simplification, the expression becomes:

lim (r,θ)→(0,0)

r cos θ sin θ
9

This limit depends on the choice of θ.

Therefore, the limit does not exist. Therefore, the correct answer is (E) does not exist.

Know more about limit here:

https://brainly.com/question/30679261

#SPJ11

How does sample size affect determinations of statistical significance? The _________ the sample, the ________.
a. larger; greater probability that the variable has an effect
b. smaller; greater probability that the variable has an effect
c. larger; the more confident you can be in your decision to reject or retain the null hypothesis
d. smaller; the more confident you can be in your decision to reject or retain the null hypothesis

Answers

The larger; the sample, the greater probability that the variable has an effect. The correct option is (a).

When it comes to determining statistical significance, a larger sample size increases the statistical power of the analysis.

This means that with a larger sample size, there is a greater probability of detecting a true effect or relationship between variables.

This is because a larger sample size provides more information and reduces the impact of random variability.

Option (a) correctly identifies that a larger sample size leads to a greater probability that the variable has an effect. With a larger sample size, the analysis has more statistical power to detect and accurately estimate the effects or relationships being investigated.

A larger sample size also increases the precision of the estimates and reduces the sampling error, making the results more reliable and representative of the population. It allows for more accurate inference and increases the confidence in the findings.

Therefore, option (c) is also partially correct, as a larger sample size provides more confidence in the decision to reject or retain the null hypothesis.

In summary, a larger sample size improves the ability to detect effects and increases the confidence in the statistical analysis and decision-making process. The correct option is (a).

To know more about "Sampling error" refer here:

https://brainly.com/question/30765764#

#SPJ11

Why are there 2π-bonds and 1σ-bond in the p-orbital (MOT)?

Answers

In the p-orbital of a molecule, there can be 2π-bonds and 1σ-bond. Let's break down what these terms mean and why they exist in the p-orbital in the context of Molecular Orbital Theory (MOT).

1. σ-bond:
A σ-bond is formed when two atomic orbitals overlap head-on, resulting in the sharing of electrons along the axis between the two nuclei. This type of bond is strong and occurs in all types of covalent bonds, such as single bonds in molecules. In the p-orbital, there is only one σ-bond because the overlapping occurs along a single axis.

2. π-bond:
A π-bond is formed when two atomic orbitals overlap side-by-side, resulting in the sharing of electrons above and below the plane formed by the two nuclei. This type of bond is weaker than a σ-bond. In the p-orbital, there are two π-bonds because the two p-orbitals of the atoms involved in the bonding process overlap side-by-side.

To illustrate this, let's consider the example of a molecule with a double bond, such as ethene (C2H4). In ethene, each carbon atom has three p-orbitals, which combine to form three molecular orbitals: one σ-orbital and two π-orbitals.

- The σ-orbital is formed when two of the p-orbitals overlap head-on between the carbon atoms. This forms the σ-bond, which is a strong bond holding the two carbon atoms together.
- The remaining p-orbital on each carbon atom overlaps side-by-side with the p-orbital of the adjacent carbon atom. This creates two π-bonds, one above and one below the σ-bond.

So, in the p-orbital of ethene, there is 1 σ-bond and 2 π-bonds, accounting for the double bond between the carbon atoms.

Know more about p-orbital:

https://brainly.com/question/14649495

#SPJ11

) A function f(x) and interval [a, b] are given. Check if the Mean Value Theorem can be applied tof on [a, b]. If so, find all values c in [a, b] guaranteed by the Mean Value Theorem Note, If the Mean Value Theorem does not apply, enter DNE for the c value. CM f(x)=2x²-3x²-72x+6 (Separate multiple answers by commas.) on [-5,9]

Answers

According to the Mean Value Theorem, there exists at least one value c in the interval (-5, 9) such that f'(c) = -23.71. The approximate value of c is -24.14.

To check if the Mean Value Theorem (MVT) can be applied to the function f(x) = 2x² - 3x² - 72x + 6 on the interval [-5, 9], we need to verify two conditions:

The function f(x) must be continuous on the closed interval [a, b].The function f(x) must be differentiable on the open interval (a, b).

Let's check these conditions:

Continuity: The function f(x) is a polynomial, and polynomials are continuous for all values of x. Therefore, f(x) is continuous on the interval [-5, 9].Differentiability: The function f(x) is also a polynomial, and polynomials are differentiable for all values of x. Therefore, f(x) is differentiable on the interval (-5, 9).

Since both conditions are satisfied, we can conclude that the Mean Value Theorem applies to f(x) on the interval [-5, 9].

According to the Mean Value Theorem, there exists at least one value c in the interval (-5, 9) such that the derivative of f evaluated at c is equal to the average rate of change of f over the interval [-5, 9].

To find the value(s) of c, we need to find the derivative of f(x) and set it equal to the average rate of change.

f(x) = 2x² - 3x² - 72x + 6

Taking the derivative:

f'(x) = 4x - 6x - 72

Simplifying:

f'(x) = -2x - 72

Now, we calculate the average rate of change of f over the interval [-5, 9]:

Average rate of change = (f(b) - f(a)) / (b - a)

= (f(9) - f(-5)) / (9 - (-5))

= (2(9)² - 3(9)² - 72(9) + 6 - [2(-5)² - 3(-5)² - 72(-5) + 6]) / (9 - (-5))

= (162 - 243 - 648 + 6 - 50 + 75 + 360 + 6) / 14

= -332 / 14

= -23.71

We need to find the value(s) of c such that f'(c) = -23.71.

Solving -2c - 72 = -23.71, we find:

-2c = -23.71 + 72

-2c = 48.29

c ≈ -24.14

Therefore, according to the Mean Value Theorem, there exists at least one value c in the interval (-5, 9) such that f'(c) = -23.71. The approximate value of c is -24.14.

To know more about Mean Value Theorem, visit:

https://brainly.com/question/31033828

#SPJ11

Transcribed image text:
An orthogonal basis for A, ⎣


−10
2
−6
16
2

−4
8
−12
16
8

−1
5
−3
22
5

−1
10
−3
22
0




, is ⎩






−10
2
−6
16
2




, ⎣


3
3
−3
0
3




, ⎣


6
0
6
6
0




, ⎣


0
5
0
0
−5








. Find the QR factorization of A with the given orthogonal basis. The QR factorization of A is A=QR, where Q= and R=

Answers

To find the QR factorization of matrix A using the given orthogonal basis, we can use the formula:

A = QR

where Q is an orthogonal matrix and R is an upper triangular matrix.

The orthogonal basis for A is given as:

Q = ⎡

−10 2 −6 16 2

3 3 −3 0 3

6 0 6 6 0

0 5 0 0 −5

To find matrix R, we can use the formula:

R = Q^T * A

where Q^T is the transpose of matrix Q.

Calculating the transpose of Q:

Q^T = ⎡

−10 3 6 0

2 3 0 5

−6 −3 6 0

16 0 6 0

2 3 0 −5

Calculating R:

R = Q^T * A = ⎡

−10 3 6 0

2 3 0 5

−6 −3 6 0

16 0 6 0

2 3 0 −5

⎦ * ⎡

−10 2 −6 16 2

−4 8 −12 16 8

−1 5 −3 22 5

−1 10 −3 22 0

Performing the matrix multiplication:

R = ⎡

446 -139 189 100

0 14 0 -42

0 0 0 0

0 0 0 0

Therefore, the QR factorization of matrix A is:

A = QR, where

Q = ⎡

−10 2 −6 16 2

3 3 −3 0 3

6 0 6 6 0

0 5 0 0 −5

R = ⎡

446 -139 189 100

0 14 0 -42

0 0 0 0

0 0 0

Inverses of Functions 7. Find fᵒg and gᵒf, if they exist. f = {(-4,-5), (0, 3), (1,6)} and g = {(6, 1), (-5,0), (3,-4)}. 8. Find [gᵒh] (x) and [hg](x), if they exist. g(x) = x + 6 and h(x) = 3x². 9. Find the inverse of this relation. {(-5,-4), (1, 2), (3, 4), (7,8)} 10. Find the inverse of each function. Then graph the function and its inverse. g(x) = 3 + x

Answers

The inverse function is g⁻¹(x) = x - 3.

Let us begin with fᵒg, which stands for f composite g. To calculate this, we first need to apply the function g to the domain of f. f = {(-4,-5), (0, 3), (1,6)} and

g = {(6, 1), (-5,0), (3,-4)}.

So, g(-4) = 1, g(0) = 0, and g(1) = -4. Then,

fᵒg = {(-4,6), (0,-5), (1,1)}.

Now, let's calculate gᵒf, which stands for g composite f. To calculate this, we first need to apply the function f to the domain of

g. f = {(-4,-5), (0, 3), (1,6)} and g = {(6, 1), (-5,0), (3,-4)}.

So, f(6) is undefined, f(-5) = 3, and f(3) is undefined. Then, gᵒf is undefined.

8. Here, we have to calculate [gᵒh] (x) and [hg](x), if they exist.

g(x) = x + 6 and h(x) = 3x².So,

[gᵒh] (x) = g(h(x))

= g(3x²) = 3x² + 6.

Now, [hg](x) = h(g(x))

= h(x+6)

= 3(x+6)²

= 3(x² + 12x + 36).

9. To find the inverse of this relation, we have to swap the x and y values and solve for y.{(-5,-4), (1, 2), (3, 4), (7,8)} becomes {(-4,-5), (2,1), (4,3), (8,7)}.

10. g(x) = 3 + x

The inverse of this function can be found by swapping the x and y values. Then, solving for y:

x = 3 + y

y = x - 3

Therefore, the inverse function is g⁻¹(x) = x - 3.

We have learned about inverses of functions and how to calculate f composite g and g composite f. We have also learned how to find the inverse of a relation and how to find the inverse of a function and graph it.

To know more about the inverse function, visit:

brainly.com/question/25614985

#SPJ11

Other Questions
. Based on the Cenozoic Life exhibit, describe hominins, their rise to dominance, and the beginnings of civilization. Ethanol has a normal boiling point of 78.4 o C, a boiling-point constant of Kb = n1.07 K kg/mol and its vapour pressure at 292 K is 5332 Pa. A laboratory assistant adds sucrose (C12H22O11), a non-volatile sugar, to 400 g of ethanol at the given temperature. The vapour pressure of the solution is measured to be 5252 Pa. Determine the boiling point of the solution. Suppose that f(x) is continuous at x=0 and limx0+f(x)=1. Which of the following must be true? Circle all that apply. a) limx0f(x)=1 b) limx0f(x)=DNE c) f(0)=1. d) f(x) is differentiable at x=0 Given the function C(r) = (r6) (r + 7) (r - 2) its C-intercept is its r-intercepts are Question Help: Video Message instructor Calculator Submit Question After which event could it be said that evolution has occurred?An individual is born with six fingers on one hand instead of five.An animals white winter coat is replaced by a darker coat in the spring.A new predator comes into an environment.An allele frequency in a population changes over time. Show that the third Maclaurin polynomial for \( f(x)=(x-3)^{3} \) is \( f(x) \). Compare the de Broglie wavelength of a proton moving at 1.30x107 miles per hour (5.81x106 m/s) to that of a bullet moving at 700 miles per hour (313 m/s) and an electron with a speed of 1.30x107 miles per hour (5.81x106 m/s). What is the area of a right triangle with a height of six and one fourth yards and a base of 22 yards? 34 yds2 sixty eight and three fourths yds2 132 yds2 one hundred thirty seven and one half yds2 Monthly loan payments Personal Finance Problem Tim Smith is shopping for a used luxury car. He has found one priced at $31,000. The dealer has told Tim that if he can come up with a down payment of $6,300, the dealer will finance the balance of the price at a 7% annual rate over 2 years (24 months). (Hint: Use four decimal places for the monthly interest rate in all your calculations.) a. Assuming that Tim accepts the dealer's offer, what will his monthly (end-of-month) payment amount be? b. Use a financial calculator or spreadsheet to help you figure out what Tim's monthly payment would be if the dealer were willing to finance the balance of the car price at an annual rate of 3.8% ? Time to accumulate a given sum Personal Finance Problem Manuel Rios wishes to determine how long it will take an initial deposit of $8,000 to double. a. If Manuel earns 9% annual interest on the deposit, how long will it take for him to double his money? b. How long will it take if he earns only 6% annual interest? c. How long will it take if he can earn 11% annual interest? During war time in history did clinical work become prominent? A.During Wendis practice B.World War II C.World War I D.During the inception of behavioral psychology (b) Generalize the fact that for a given sample of biomass, which one is larger: its dry-basis or its wet-basis moisture content? (a) Show that the power transmitted forward in a deep-water wave relate to the amplitude and wavelength of the wave. (b) Show that the power per unit wave front of deep-water waves relate to their significant wave. height. Can get explantion of the code to better understand it---------------------------------------------------------------------------------------------------import pandas as pdimport numpy as npimport matplotlib.pyplot as pltimport seaborn as snsfrom sklearn.linear_model import LogisticRegressionfrom sklearn.model_selection import train_test_splitfrom sklearn.metrics import classification_report, accuracy_scoredata = pd.read_csv('creditcard.csv')data.head()# "Time" column is the time difference from current transaction and first transaction in the database# "Amount" column is the amount that was transacted# Columns "V1" to "V28" are a result of PCA# checking missing valuesdata.isna().sum()# There are no missing values# Normalizing the "Amount" valuesdata['Amount'] = (data['Amount'] - data['Amount'].min()) / (data['Amount'].max() - data['Amount'].min())data.head()# Checking correlation of features with target "Class"plt.figure(figsize=(12, 6))data.corr()['Class'].plot(kind='bar')plt.show()# Specifying training variables and target variablesX = data.drop(['Class'], axis=1).to_numpy()y = data['Class'].to_numpy()# Setting random seednp.random.seed(0)# Splitting the data into training and testing setsX_train, X_test, y_train, y_test = train_test_split(X, y, train_size=0.75)X_train.shape, X_test.shape, y_train.shape, y_test.shape# Creating Logistic Regression classifier and training ("max_iter=1500" ensures that the model converges to the global minima)clf = LogisticRegression(max_iter=1500)clf.fit(X_train, y_train)# Model accuracy on train and test setspreds = clf.predict(X_train)print("Training accuracy =", accuracy_score(preds, y_train))preds = clf.predict(X_test)print("Testing accuracy =", accuracy_score(preds, y_test))# The classification report including precision and recall on the testing setprint(classification_report(preds, y_test)) according to the energy information association (eia.doe.gov), the price per gallon of unleaded gasoline in the gulf coast region as of 09/23/19 is normally distributed with a mean of $2.25 and standard deviation of $0.12. suppose you take a random sample of 100 gas stations in the gulf south. what is the probability that the average price per gallon is between $2.22 and $2.28? select one: 0.8164 0.8904 0.7458 none of these are correct. 0.9876 Data modelling is the process of documenting a software system design as an easy-to-understand diagram. Data modelling allows you to conceptually represent the data and the association between data objects and rules.2.1 Elaborate on FIVE (5) primary goals of data modelling in software design2.2 Following from question 2.1, elaborate on any FIVE (5) advantages of implementing data models in software design. . Cloudy Corporation has provided the following cost data for last year when 50,000 units were produced and sold: All costs are variable except for $100,000 of manufacturing overhead and $100,000 of selling and administrative expense. If the selling price is $12 per unit, the net operating income from producing and selling 120,000 units would be: 17. Constance Company sells two products, as follows: Fixed expenses total $450,000 annually. The expected sales mix in units is 60% for Product Y and 40% for Product Z. How much is Constance Company's expected break-even sales in dollars? During the earthquake, what we need to do to be safe,write steps.(i) When you are in the classroom.(ii) When you are out of danger The producer price index contains: a) price indexes for approximately 500 mining and manufacturing industries. b) a collection of inputs such as commodities, raw materials, intermediate and finished goods used by businesses and organized by stage of production and processing. c) information from the consumer expenditure survey. d) a fluctuating bundle of consumer goods and services. Table A. Refer to the below table. Refer to Table A. The real GDP growth rate between Year 2000 and Year 2005 is about: [Hint: real growth rate =[( real GDP 2005 - real GDP 2000) / real GDP 2000)]100% a) 11.76% b) 12.89% c) 13.33% d) 14.79% e) Insufficient data provided to answer this question. Table A. Refer to the below table. Refer to Table A. Based on the data provided, we can say that the base year is: [Hint: Price Index =( nominal GDP / real GDP) 100] a) Year 2000 b) Year 2005 c) Year 2008 d) Year 2009 e) Insufficient data provided to answer this question. Table A. Refer to the below table. Refer to Table A. The rate of inflation/deflation between years 2000 and 2009 is about: Hint: rate of deflation/inflation =[(PI current year Pl earlier year )/PI earlier year ]100% a) A deflation of 18.12% b) A deflation of 22.13% c) An inflation of 18.12% d) An inflation of 22.13% e) Insufficient data provided to answer this question. Table A. Refer to the below table. Refer to Table A. The rate of inflation/deflation between years 2000 and 2009 is about: Hint: rate of deflation/inflation =[(PI current year Pl earlier year )/PI earlier year ]100% a) A deflation of 18.12% b) A deflation of 22.13% c) An inflation of 18.12% d) An inflation of 22.13% e) Insufficient data provided to answer this question. Which of the following would be included in the US consumer market basket? a) Price of crude oil b) Price of a hotel room in Beirut, Lebanon c) Price of a gallon of gasoline d) Price of iron ore What is the difference between "comparative advantage" and "absolute advantage". a) To have the absolute advantage in a good a producer has to be the lower resource cost producer of that good. b) To have a comparative advantage in a good the producer has to be the more efficient producer of the good. c) The more efficient producer of a good will have the absolute advantage in that good. d) To have a comparative advantage in a good a producer has to be the lower opportunity cost producer of the good. e) A producer can gain a comparative advantage in a good by adopting a successful marketing campaign. The steel corrosion rate in concrete is normally ......... because...... a)High-pH is acidic and it protects the steel from corrosion. b)High - pH is alkaline and it protects the steel from corrosion. c)Low-pH is acidic and it protects the steel from corrosion.d) Low-pH is alkaline and it protects the steel from corrosion. 3. Evaluate the following: (a) \( \int e^{\sqrt{x}} d x \) (b) \( \int_{-\infty}^{0} x e^{-x} d x \)