identify two ways to increase the current in a simple circuit

A bond that is formed between an electronegative atom and a hydrogen atom with a positive dipole is called a Hydrogen Bond.

Hydrogen bonding is a special and important type of dipole-dipole attraction between molecules, unlike a covalent bond, to a hydrogen atom. It results from the attractive force existing between a hydrogen atom covalently bonded to a very electronegative atom such as a Nitrogen, Oxygen, or Fluorine atoms or any other very electronegative atom. Hydrogen bond strengths range from 4 kJ(kilojoule) to 50 kJ per mole of hydrogen bonds.

In molecules containing bonds of N-H, O-H or F-H, the large difference in electronegativity between the H atom and the other atoms of N, O or F leads to a highly polar covalent bond (i.e., a bond dipole).

Because of the difference in electronegativities of the atoms, the H atom bears a large partial positive charge and the other electronegative atoms of N, O or F bear a large partial negative charge.

Some examples of molecules or compounds having hydrogen bonding are as follows.

Learn more about Hydrogen Bond here:

https://brainly.com/question/15099999

#SPJ4

A healthy behavior can be maintained by maintaining healthy relationships with supportive friends and family, keeping good hygiene, having enough sleep, exercising etc.

Maintaining a healthy behavior is very important not just for our emotional and mental health but also for our overall physical as well as social well being too. Our behavior reflects our attitude as well as our beliefs.

A healthy behavior can be maintained by healthy social interaction amongst our peers, supportive friends, family and also in the community as well as institution which we are a part of. One can also maintain healthy behavior by adopting healthy habits like exercising, sleeping on time, keeping good hygiene etc.

To know more about healthy behavior here

https://brainly.com/question/16939543

#SPJ4

In the activity series, the more active elements are found at the bottom and at the top. Option d.

The activity series is a way of organizing elements according to their reactivity.

The elements found at the bottom of the series are the most active, and those found at the top are the least active.

Knowing the activity series can help us predict how a reaction will proceed, and can be a useful tool when determining which compounds are most likely to form in a given reaction.

The elements at the bottom of the activity series are the most active, and the elements at the top are the least active. Knowing the activity of elements can help you understand the chemical properties of different materials and how they may interact with each other.

To learn more about series, click here:

https://brainly.com/question/14129976

#SPJ4

Answer: simple and complex.

Explanation:These are also called simple sugars. They're found in refined sugars, like the white sugar you see in a sugar bowl. If you have a lollipop, you're eating simple carbs.

To calculate the percentage yield of a reaction, you need to know the theoretical yield (the maximum amount of product that can be produced based on the stoichiometry of the reactants) and the actual yield (the amount of product that is actually produced in the reaction).

The balanced equation for the combustion of hydrogen gas (H2) with oxygen gas (O2) to form water vapour (H2O) is:

2H2 + O2 -> 2H2O

From the balanced equation, we can see that for every 2 moles of H2, 1 mole of H2O is produced. To convert 4 grams of H2 to moles, we use the molar mass of H2 which is 2.016 g/mol.

4g / 2.016 g/mol = 1.98 moles

Now we can calculate the theoretical yield of H2O. Since 2 moles of H2O are produced for every 2 moles of H2, the theoretical yield of H2O is:

1.98 moles x (2 moles H2O / 2 moles H2) = 1.98 moles

The molar mass of H2O is 18.02 g/mol, we can convert the theoretical yield of H2O from moles to grams:

1.98 moles x 18.02 g/mol = 35.7 g

To calculate the percentage yield, we divide the actual yield (18 g) by the theoretical yield (35.7 g) and multiply by 100:

(18 g / 35.7 g) x 100 = 50.5 %

Therefore, the percentage yield of the reaction is 50.5%.

Learn more about Percentage Yield here: https://brainly.com/question/29714892

#SPJ4

The claim that sense neurons' cell bodies are located in the grey commissure, an expanded region of the dorsal root.

Dorsal nerve roots provide sensory neural signals to the central nervous system from the peripheral nervous system. Anatomically, a dorsal root ganglion develops from the dorsal root of the spinal nerves. For the central nervous system to react, they transmit sensory data from multiple peripheral receptors. It is generally recognised that DRG has a role in chronic pain. The first description of anaesthesia infiltration of the DRG was made in 1949. It has been possible to target the DRG using the dorsal root entry zone (DREZ), a nearby related neural target, dorsal rhizotomy or gangliectomy, conventional radiofrequency denervation, pulsed radiofrequency, and steroid injection.

Learn more about Neurons' here:

https://brainly.com/question/29816540

#SPJ4

Answer:

C Two

Explanation:

no of proton = no of electron

if the mass of the sample is 272 grams, the number of moles of anhydrate present would be:

moles = 2

Generally, To determine the number of moles of anhydrate present, you would need to know the mass of the sample. If you have that information, you can use the formula:

moles = mass / molar mass

Where

mass is the mass of the sample in grams and

molar mass is the molar mass of the salt (in this case, 136 g/mol).

For example, if the mass of the sample is 272 grams, the number of moles of anhydrate present would be:

moles = 272 / 136

= 2

Please provide me with more information so that I could give you more accurate answer.

Read more about moles

https://brainly.com/question/26416088

#SPJ1

When hydrogen bonds develop between the molecules, the boiling point of water rises. Hydrogen bonds are created when the electronegative oxygen atoms of two different water molecules combine.

Has a hydrogen atom that it can attach to in a separate water molecule. The molecules are hence strongly attracted to one another. In order to make a hydrogen bond, two atoms from either the same or a distinct molecule are required. Hydrogen bonds can form in two different ways: Between-molecule H-bonding molecules form hydrogen bonds. Hydrogen bonding is possible when the hydrogen atom in a molecule is attached to a strongly electronegative atom. One hydrogen atom in water is wedged between two oxygen atoms, creating a solid bond with the following water molecule.

Learn more about molecule here

https://brainly.com/question/19556990

#SPJ4

The acid rain is the result of pollutants being released into the atmosphere.

What is acid rain ?

Nitric and sulfuric acids, which are included in acid rain and other dry, abrasive particles that fall to the ground, can harm the surfaces of sculptures, buildings, and other man-made structures. Metal is corroded by the acidic particles, which also hasten the aging of stone and paint.

What is pollutants ?

A material that is present in concentrations that could be harmful to creatures (including people, animals, and plants) or go beyond the limits of acceptable environmental quality is referred to as a pollutant. Frequently, the words "term" and "contaminant" are used interchangeably.

Therefore, acid rain is the result of pollutants being released into the atmosphere.

Learn more about acid rain from the given link.

https://brainly.com/question/30278887

#SPJ4

Answer:

30

Explanation:

I’m pretty sure it is

The answer is  3.88 g/cm³ for density.

When you know the radius, you may use the formula volume = (4/3) π r3 to calculate the sphere's volume. Then, using the formula mass = volume density, you can calculate the mass by multiplying the volume by the density: mass = volume density. The formula mass = (4/3) π r3 density can also be used.

Given,

Radius of gold sphere is equal to 272 pm or 272 × 10 ⁻¹² m.

=  2.72 10 10 m 10²cm/m.

The diameter of an atom of gold is 2.72 × 10⁻⁸ cm,

volume of sphere = πr³

V(Au) = 4/3 · (2.72·10⁻⁸ cm)³ · 3.14.

The volume of one atom of gold is 8.43·10⁻²³ cm³

Mass of atom of sphere is equal to 3.27·10⁻¹³ ng · 10⁻⁹ g/ng

Gold atom mass is 3.27·10⁻²² g grams,

density of sphere = mass of gold atom ÷ Volume of gold atom

density of sphere = 3.27·10⁻²² g ÷ 8.43·10⁻²³ cm³

One gold atom has a density of 3.88 g/cm³

To learn more about density from given link

https://brainly.com/question/5419850

#SPJ4

Answer:

Force=Work done÷ distance travelled

Explanation:

To do this, you want to make the Force variable on its own so you divide d on both sides to get F=W/d

Hope this helps.

Answer:

phosphorus=38.27%

hydrogen=2.47%

oxygen=59.26%

Answer: Statistics is the best way for Margarita to organize, interpret, and present her data.

Explanation:

Answer:

Polar and nonpolar

Explanation:

CO2 is a nonpolar molecule meaning it has equal sharing of electrons

SO2 is a polar molecule meaning that the oxygen pulls slightly more giving it a more bent shape as it has a more negative and a more postive side

12,005 barium atoms would have to be laid side by side to span a distance of 2.60 mm

Barium can be defined as a chemical element with the symbol Ba and atomic number 56.

To find the number of barium atoms that would have to be laid side by side to span a distance of 2.60 mm.

we need to divide the distance by the radius of one barium atom:

2.60 mm / 217 pm = 12,005

Therefore, 12,005 barium atoms would have to be laid side by side to span a distance of 2.60 mm.

Learn more about barium atoms here: brainly.com/question/23694560

#SPJ1

The stratosphere is the most chemically stratified layer in the atmosphere.

What is the stratosphere?

The stratosphere is the layer of the atmosphere that is chemically stratified, with the lightest molecules riding above heavier molecules. The ozone layer, which contains a high concentration of ozone (O3) molecules, is located in the stratosphere.

The stratosphere is located above the troposphere and extends from about 15 km to about 50 km above the Earth's surface. This layer is characterized by a relatively constant temperature and is mostly composed of nitrogen and oxygen molecules.

The ozone layer protects the Earth from harmful ultraviolet radiation from the sun. Because ozone is lighter than the air below it, it remains in the stratosphere, while the heavier gases in the air below do not reach that high. This chemical stratification is maintained by the balance of ozone production and destruction processes in the stratosphere.

Hence, the stratosphere is the most chemically stratified layer in the atmosphere.

To learn more about the stratosphere from the given link:

https://brainly.com/question/28097222

#SPJ4

We must now strike a balance. This portion is all guesswork, but look at nitrogen on the right; there are two of them, so we put a "2" next to nitrogen monoxide.

We then count to check whether everything is balanced, and we'll notice that there are now two oxygens on the left and only one on the right, so we'll put a "2" next to the water. Count again, and lastly, a "2" next to the hydrogens will give us a balanced equation of:nitrogen monoxide.  Now there are rate laws. If your reaction was A+B—>C+D. The rate law is equal to some empirically established constant "k" times the concentration of the reactants increased to some value. power (also empirically determined) (also experimentally determined). So the general form is as follows: Alpha and Beta are just the order of the reactants. Because the question specifies the sequence of each reactant, your rate law should look like this.

learn more about nitrogen monoxide  here:

https://brainly.com/question/17164284

#SPJ4

Prediction 1 best shows what the population could look like after many generations. Because, the long beak traits is having more life time.

Each characteristics in a living thing is created by a respective genetic coding in its body. The genetic code which is responsible for a particular behavior or appearance is called a genetic trait.

Here, the prediction 1 is best . It already saying that long-beak hummingbirds are more likely to survive, that baby survived long enough to pass on its mutation, so the long-beak trait became more common over generations.

Prediction 2 says abut a  genetic trait which is less fit to survive. Hence, cannot affect the next generation population. Therefore, prediction 1 is best.

Find more on genetic traits:

https://brainly.com/question/29679846

#SPJ1

Your question is incomplete. But your complete question probably was:

Prediction 1 :Two hummingbirds with short or medium beaks had a baby with a mutation in its genes for the long-beak trait.

Prediction 2 is best. A hummingbird could have been born with a mutation in its genes for the long-beak trait and lived for a little while.

Answer:

0. 261

Explanation:

Use ideal gas formula: PV = nRT, meaning that constant R = [tex]0.08206\frac{(L)(atm)}{(K)(mol)}[/tex]

[tex](1 atm)(6.28L) = n(0.08206\frac{(L)(atm)}{(K)(mol)})(293 K) \\n = \frac{(1 atm)(6.28L)}{(0.08206\frac{(L)(atm)}{(K)(mol)})(293 K)} \\n = 0.26119...\\n = 0.261[/tex]

Answer:

Hydropower technologies generate power by using the elevation difference, created by a dam or diversion structure, of water flowing in on one side and out, far below, on the other.

Single-replacement reactions will occur if the reaction below occurs

K(s) + ZnCl₂(aq) →→→ KCl₂ + Zn.

This is also referred to as single displacement reaction and it is referred to as a reaction in which one element is substituted for another element in a chemical reaction.

Single-replacement reactions will occur in the reaction below because it follows and obeys this condition which is:

A + BX ⇒  B + AX

K(s) + ZnCl₂(aq) →→→ KCl₂ + Zn.

Here we can deduce that zinc was substituted which is therefore the reason why it was chosen as the correct choice in this scenario.

Read more about Single-replacement reactions here https://brainly.com/question/7959057

#SPJ1

Based on its solubility in hexane, C₆H₁₄. Then the order of these compounds is C₃H₈ → CH₃OH → H₂O

Non-polar compounds are compounds that are formed due to the existence of a bond between electrons in the elements that form them. This happens because the bonding elements have the same or nearly the same electronegativity value.

Polar compounds have a high dipole moment, while nonpolar compounds do not have a dipole moment. This difference causes the two solutions to not bond.

Hexane is non-polar.

So, C₃H₈ is the easiest to dissolve because C₃H₈ is also non-polar.

H₂O is more polar than CH₃OH. So, CH₃OH will dissolve more easily than air. air will at least dissolve.

So that the order based on its solubility with hexane is C₃H₈, CH3OH, H₂O.

Your question may incomplete, for complete questions it's in the picture.

Learn more about non-polar compounds at https://brainly.com/question/1426521

#SPJ4

The test variable is manipulated while the outcome variable is observed.

When we use the term variable, our minds would have to go to something that has the ability to change. As such, when we are carrying out an experiment there is the variable that we manipulate and this would lead to a change in another variable.

The variable that we are able to manipulate as we are carrying out the experiment is what we call the test variable while the one that is changed due to this manipulation is called the out come variable.

Learn more about test variable:https://brainly.com/question/17344045

#SPJ1

The elements most likely to react in the same manner in a chemical reaction are those that are in the same group. It because of the same number of valence electrons.

The elements in the same group are most likely to react in the same manner in a chemical reaction. It is because their outer shells have the same number of valence electrons. In fact, the electrons are the component of an atom that is involved in reactions. Meanwhile, the protons and neutrons in an atom's nucleus are not involved in reactions.

For example:

- They all have one valence electron, which they easily lose when forming ions.

- They are easily reacted with water

- They possess low melting points and densities

- They are good electrical conductors.

Here to learn more about the Elements of the Periodic Table:

https://brainly.com/question/25916838

#SPJ4

The kinetic energy of a car with a mass of 1500 kg running at a velocity of 20 m/s to the east is  60000J (Joules).

The kinetic energy of an object is the energy it possesses due to its motion. It is calculated by using the formula KE = 0.5 * m * v^2, where m is the mass of the object in kilograms and v is its velocity in meters per second.

So, for a car with a mass of 1500 kg running with a velocity of 20 m/s to the east, the kinetic energy can be calculated as follows:

KE = 1/2 * 1500 kg * (20 m/s)^2

KE = 60000 J

By plugging these values into the formula, we can find that the car's kinetic energy is 60000 J (Joules). It's worth noting that kinetic energy is a scalar quantity and has no direction, so the velocity's direction (east) does not affect the calculation.

To know more about Kinetic energy click here:

https://brainly.com/question/26472013#

#SPJ4

The value for k that transforms the function f into g is -3.

What is the meaning of value for k?

Value for k is a term used in mathematics to refer to the number of elements in a set. The value of k depends on the context of the problem. It could be any numerical value, depending on what it is being used for.

Given : g(x) = f(x) + k

Taking two points from the graph (1,0) and (-1, 2)

slope =   [tex]\frac{2-0}{-1-1}[/tex] =  [tex]\frac{2}{-2}[/tex] = -1

The equation will be,

                       y-0 = -1 (x-4)

                          y= -x + 4

                        f(x)= -x + 4

  So,                g(x)= f(x) + k

                    -x + 1= -x + 4 + k

                          k= 1+4

                          k= -3

Therefore, the value for k= -3.

To learn more about value for k from the link

https://brainly.com/question/24379564

#SPJ4

Carbohydrate. The word derives from the fact that the majority of compounds in this chemical class are produced from the combination of carbon and water.

Water is a compound because it is made up of two elements: hydrogen and oxygen. Water, on the other hand, is not the same as oxygen or nitrogen. While water is a liquid, oxygen and nitrogen are gases. To be more specific, all quantitative estimates are made for glucose, the most important hexose in human metabolism. Organic compounds are those with a carbon atom backbone, whereas all other compounds are classified as inorganic. Carbohydrate. The word derives from the fact that the majority of compounds in this chemical class are produced from the combination of carbon and water.

learn more about Water  here:

https://brainly.com/question/28465561

#SPJ4

The mass of chlorine needed to create the maximum amount of NaCl would be, Chlorine mass =41.56 g Cl x 33.2% = 13.7 g Cl.

To learn more about mass of chlorine refer :

brainly.com/question/30314303

#SPJ1

The mass of chlorine needed to create the maximum amount of NaCl would be, Chlorine mass =41.56 g Cl x 33.2% = 13.7 g Cl.

To determine the mass of chlorine needed to create the maximum possible amount of NaCl, we must first look at the percent composition of sodium chloride.

Sodium chloride is composed of 58.44% Na and 41.56% Cl. This means that for every 100 grams of sodium chloride, 58.44 grams is sodium and 41.56 grams is chlorine.

Since we have 20.0 g of sodium, we can calculate the amount of chlorine needed to create the maximum amount of sodium chloride.

First, convert 20.0 g of sodium to a percentage: 20.0 g of sodium is 33.2% of 58.44%. Then, multiply 41.56 grams of chlorine by 33.2%: 41.56 g Cl x 33.2% = 13.7 g Cl.

Therefore, the maximum amount of sodium chloride that can be created from 20.0 g of sodium and 13.7 g of chlorine is 34.1 g.

To create this amount of sodium chloride, we need 20.0 g of sodium and 13.7 g of chlorine.

To learn more about mass of chlorine refer :

https://brainly.com/question/28440406

#SPJ1