If 4 moles of gaseous nitrogen gas are confined in a 6.0 L container at 1770C and 12.0 atm. Suppose the container isothermally expand to 36.0 L. What is the final pressure experienced by this gas?

The balanced chemical equation for the reaction between hydrobromic acid and sodium hydroxide is: The maximum mass of water that can be produced in this reaction is 0.495 g.

HBr + NaOH → NaBr + H2O

According to the equation, 1 mole of hydrobromic acid reacts with 1 mole of sodium hydroxide to produce 1 mole of water. The molar mass of HBr is 80 g/mol, while the molar mass of NaOH is 40 g/mol. Therefore, the number of moles of HBr and NaOH can be calculated as follows:

moles of HBr = 5.66 g / 80 g/mol = 0.07075 mol

moles of NaOH = 1.1 g / 40 g/mol = 0.0275 mol

Since the reaction between HBr and NaOH is a one-to-one ratio, the limiting reagent is NaOH because it produces fewer moles of product. Therefore, the number of moles of water produced can be calculated as follows:

moles of H2O = 0.0275 mol

The mass of water produced can be calculated using its molar mass, which is 18 g/mol:

mass of H2O = 0.0275 mol × 18 g/mol = 0.495 g

Therefore, the maximum mass of water that can be produced in this reaction is 0.495 g.

for more such questions on  chemical

https://brainly.com/question/7807455

#SPJ11

Answer:

The Group 8A elements are essentially chemically inert and have a full octet of eight valence electrons in their highest-energy orbitals (ns2np6), so these elements have very little tendency to gain or lose electrons to form ions, or share electrons with other elements in covalent bonds. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds. Under standard conditions all members of the noble gas group behave similarly. All are monotomic gases under standard conditions.

The balanced chemical equation of CaS + AlC → A + CaC is  CaS + AlC → A + CaCS, ensuring that the number of atoms is equal on both sides.

The chemical equation given is:

CaS + AlC → A + CaC

To balance this equation, we need to ensure that the number of atoms of each element is the same on both sides. Let's go through the balancing process step by step:

Calcium (Ca): There is one Ca atom on the left side and one on the right side, so Ca is already balanced.

Sulfur (S): There is one S atom on the left side and none on the right side. To balance sulfur, we need to add an S atom on the right side.

CaS + AlC → A + CaCS

Aluminum (Al): There is one Al atom on the left side and one on the right side, so Al is already balanced.

Carbon (C): There is one C atom on the left side and one on the right side, so C is already balanced.

Now the balanced equation is:

CaS + AlC → A + CaCS

In this balanced equation, we have one calcium atom, one sulfur atom, one aluminum atom, and one carbon atom on both sides, ensuring that the law of conservation of mass is satisfied.

It's important to note that the "A" in the balanced equation represents an unknown product and may require further experimentation or information to determine its identity. Additionally, the compound "CaCS" is not a commonly known compound, so further investigation would be needed to verify its existence and properties.

Know more about law of conservation of mass here:

https://brainly.com/question/15289631

#SPJ8

The balanced equation for the reaction between iron (Fe) and hydrochloric acid (HCl) to form iron chloride (FeCl2) and hydrogen (H2) is: Fe + 2HCl → FeCl2 + H2

This equation represents a single-displacement reaction in which iron displaces hydrogen from hydrochloric acid, resulting in the formation of iron chloride and hydrogen gas. The coefficients in the equation show that one molecule of iron reacts with two molecules of hydrochloric acid to produce one molecule of iron chloride and one molecule of hydrogen gas. To balance this equation, we need to ensure that the number of atoms of each element on both sides of the equation is the same. In this case, we have one iron atom on both sides, two hydrogen atoms on the reactant side, and two hydrogen atoms on the product side. We also have two chlorine atoms on the product side and none on the reactant side. To balance the equation, we add a coefficient of 2 in front of hydrochloric acid and in front of hydrogen gas: Fe + 2HCl → FeCl2 + 2H2
This balanced equation shows that one molecule of iron reacts with two molecules of hydrochloric acid to produce one molecule of iron chloride and two molecules of hydrogen gas.

for more questions on equation

https://brainly.com/question/30216429

#SPJ11

1) The pH is 2.5

2) The pH is 11.5

3) The initial concentration is[tex]2.1 * 10^-14[/tex]M

pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution.

1) The pH of the solution can be gotten from;

K = [tex]x^2[/tex]/0.65 - x

[tex]1.754 * 10^-5[/tex](0.65 - x) =  [tex]x^2[/tex]

[tex]1.14 * 10^-5 - 1.754 * 10^-5x = x^2\\x^2 + 1.754 * 10^-5x - 1.14 * 10^-5 = 0[/tex]

x = 0.003 M

pH = -log(0.003)

= 2.5

2) Kb = [tex]x^2[/tex]/0.35 - x

[tex]1.8 * 10^-5 (0.35 - x) = x^2\\6.3 * 10^-6 - 1.8 * 10^-5x = x^2\\x^2 + 1.8 * 10^-5x - 6.3 * 10^-6 = 0[/tex]

x = 0.003 M

pOH = -log (0.003)

= 2.5

pH = 14 - 2.5 = 11.5

3) Hydrogen ion concentration = Antilog (-11.5)

= 3.2 * 10^-12 M

[tex]4.9 * 10^-10 = ( 3.2 * 10^-12)^2/x \\4.9 * 10^-10x = ( 3.2 * 10^-12)^2\\x = ( 3.2 * 10^-12)^2/4.9 * 10^-10\\x = 2.1 * 10^-14 M[/tex]

Learn more about pH:https://brainly.com/question/29766400

#SPJ1

An example of a low amount of force being applied to an object is as follows; a child pushing a barrel that is not moving.

Applied force is the force which is applied to an object by another object.

Ideally, a force is a physical quantity that denotes ability to push, pull, twist or accelerate a body. Work is kind of force that causes a body to move.

For example, a person pushing a barrel is an example of applied force. When the person pushes the barrel then there is an applied force acting upon the barrel.

However, when a child pushes against the barrel and it doesn't move, it can be said that a low amount of force is applied.

Learn more about applied force at: https://brainly.com/question/15974465

#SPJ1

The complete nuclear equation for this reaction is:

^27Al + ^4He → ^30P + ^1n

The bombardment of aluminum-27 by alpha particles can produce phosphorus-30 and one other particle. An alpha particle consists of two protons and two neutrons, which means it has the same composition as a helium nucleus (He). Therefore, we can write the nuclear equation for this reaction as follows:  ^27Al + ^4He → ^30P + X

Where X represents the other particle produced in the reaction.

To balance the equation, we need to ensure that the total number of protons and neutrons on both sides is the same. On the left side, we have 27 protons and 31 neutrons, while on the right side we have 15 protons and 15 neutrons (since phosphorus-30 has 15 protons and 15 neutrons). Therefore, the other particle produced must have 12 protons and 16 neutrons to balance the equation.

The other particle produced is a neutron (n), which has no charge and a mass of approximately 1 atomic mass unit.

for more such questions on nuclear
https://brainly.com/question/3992688
#SPJ11

The concept molarity is used here to determine the pH after adding 12.6 mL of the base. The term molarity is an important method which is used to calculate the concentration of a solution. Here the pH is 1.23.

The term molarity is defined as the number of moles of the solute dissolved per litre of the solution. It is also called the molar concentration. It is represented as 'M' and its unit is mol / L.

Molarity is given as:

M = Number of moles / Volume of solution in liters

'n' of HCN = 20.2 × 1 L / 1000 mL × 0.382 = 0.0077 mol

'n' of Ba(OH)₂ = 13.7 × 1L / 1000 mL × 0.421 = 0.0057 mol

Excess H⁺ = 0.002

Total volume = 20.2 + 13.7 = 33.9 mL = 0.0339 L

Concentration of H⁺ = 0.002 / 0.0339 = 0.058

So pH is:

pH = - log[H⁺]

pH = - log[ 0.058] = 1.23

To know more about pH, visit;

brainly.com/question/27945512

#SPJ1

The section that represents the phase of water with the highest kinetic energy is the gas phase or vapor phase.

Gas phase or vapor phase section is above the boiling point curve, which separates the liquid and gas phases. At this point, the temperature is at or above 100°C (at standard atmospheric pressure), and the kinetic energy of the water molecules is sufficient to overcome the intermolecular forces holding them in the liquid phase and escape into the gas phase. The gas phase has the highest kinetic energy because the water molecules in this phase are more widely separated and move more rapidly than in the liquid or solid phases. The gas phase is also characterized by the highest entropy or disorder, as the molecules are free to move in any direction and occupy a large volume. The section that represents the phase of water with the highest kinetic energy is  gas phase or vapor phase.

for more questions on water
https://brainly.com/question/19491767
#SPJ11

In the given circle, the area of the shaded sector is 72π, hence option C is correct.

The region inside the portion of the circle formed by two radii and an arc is known as the area of a sector. It only covers a small portion of the entire circle's surface.

To find the area of the shaded sector, use the formula:

According to the diagram in the question

OE is the radius

The central angel of the sector is 45⁰

A = θ/360 πr²

Put the values in the formula, we get

45 ÷ 60 × π × 24²

1/8 × π × 24 × 24

3 × 24 × π

= 72π

Thus, the area of the shaded sector is 72π.

Learn more about circle, here:

https://brainly.com/question/28137163

#SPJ1

To draw the Bohr-Rutherford diagram for fluorine-19, we begin by identifying the atomic number of fluorine, which is 9. This means that a neutral fluorine atom has 9 electrons.

The Bohr-Rutherford diagram represents the electron shells or energy levels of an atom, with each shell holding a certain number of electrons. The first shell holds a maximum of 2 electrons, while the second shell holds a maximum of 8 electrons.

Based on this information, we divide the 9 electrons of fluorine into the appropriate shells:

1. The first two electrons occupy the first shell (closest to the nucleus). This will completely fill the first shell.

2. The remaining 7 electrons occupy the second shell. However, since the second shell can hold a maximum of 8 electrons, one electron will be placed in each orbital (subshell) before the electrons are paired.

The electron configuration of fluorine-19, arranged in the Bohr-Rutherford diagram, can be represented as follows:

      1st shell: 2nd shell:

        (2) (7)

The numbers in parentheses indicate the number of electrons in each shell. In this case, the first shell has 2 electrons and the second shell has 7 electrons.

It is important to note that the Bohr-Rutherford diagram provides a simplified representation of the electron distribution and does not account for the more complex orbital arrangements. However, it provides a basic visual understanding of the electron configuration in an atom.

Briefly, fluorine-19 has a Bohr-Rutherford diagram with 2 electrons in the first shell and 7 electrons in the second shell, for a total of 9 electrons.

For more such questions on  Bohr-Rutherford ,

https://brainly.com/question/18921110

#SPJ11

When 22.0 ml, of a [tex]5.25 x 10^{-4[/tex] M cobalt(II) fluoride solution is combined with 12.0 mL of a [tex]6.18 * 10^{-4[/tex] M sodium sulfide solution does a precipitate form, the answer is: No, the precipitate doesn't form.

The balanced chemical equation for the reaction between cobalt(II) fluoride and sodium sulfide is:

[tex]CoF_2[/tex](aq) + Na2S(aq) → CoS(s) + 2NaF(aq)

To determine if a precipitate will form, we need to calculate the reaction quotient, Q, using the initial concentrations of the reactants. The expression for Q is:

Q = [tex][CoS][NaF]^2[/tex] / [CoF2]

where the square brackets denote molar concentrations.

Using the given volumes and concentrations, we can calculate the initial number of moles of each species:

moles CoF2 = [tex](22.0 mL / 1000 mL/L) * (5.25 * 10^-^4 M) = 1.155 * 10^-^5[/tex] mol

moles Na2S = [tex](12.0 mL / 1000 mL/L) * (6.18 * 10^-^4 M) = 7.416 * 10^-^6[/tex] mol

Because the reaction stoichiometry shows that 1 mol of CoF2 reacts with 1 mol of Na2S to form 1 mol of CoS, the amount of CoS formed will be equal to the lesser of these two values, which is 7.416 x 10^-6 mol.

The molar concentration of CoS in the resulting solution will be:

[CoS] = [tex](7.416 * 10^-^6 mol) / (34.0 mL / 1000 mL/L) = 2.181 * 10^-^4 M[/tex]

The molar concentrations of NaF and CoF2 in the resulting solution will be:

[NaF] = [tex](2 x 7.416 x 10^-6 mol) / (34.0 mL / 1000 mL/L) = 4.363 x 10^-4 M[/tex]

[CoF2] = [tex](1.155 x 10^-5 mol) / (34.0 mL / 1000 mL/L) = 3.398 x 10^-4 M[/tex]

Substituting these values into the expression for Q, we get:

Q = [tex](2.181 * 10^-^4)(4.363 * 10^-^4)^2 / (3.398 * 10^-^4) = 1.251[/tex]

Comparing the value of Q to the equilibrium constant Kp, we can see that Q is much greater than Kp (Q > Kp), indicating that the reaction will proceed in the reverse direction to reach equilibrium, and no precipitate will form.

Therefore, the answer is: No, the precipitate doesn't form.

For more details regarding chemical reaction, visit:

https://brainly.com/question/29762834

#SPJ1

Answer:

The sun provides most of the energy on earth because it is the earth's (and the solar system's) greatest source of heat and light.

Explanation:

The process of photosynthesis in plants uses the energy from the sun and converts that energy to be used for plants.
The burning of fossil fuels produces greenhouse gases which trap the heat in our earth's atmosphere (causing global warming).

The scientist needs to create 45 soil mixtures in order to test all possible combinations of the 10 soil types. Option B.

To calculate the number of unique soil mixtures, we can use the formula for the number of combinations of n objects taken k at a time, which is given by:

C(n,k) = n! / (k! * (n-k)!)

In this case, we have 10 soil types and we want to take 2 at a time to create unique mixtures. Thus, we substitute n=10 and k=2:

C(10,2) = 10! / (2! * (10-2)!)

= 10! / (2! * 8!)

= (10 x 9) / 2

= 45

In other words, the scientist needs to create 45 soil mixtures in order to test all possible combinations of the 10 soil types.

More on permutation and combination can be found here: https://brainly.com/question/13387529

#SPJ1

Answer:

c) K2SO3

Explanation:

The oxidation number of S in K2SO4 K 2 S O 4 is +6. So, this is the highest oxidation number of S amongst the oxidation number of S in all the given compounds.

Answer:

On the support of victims of human rights violation, the law should clearly state and express the repercussions of violating human rights. The citizen on the other hand should be well versed with human rights and should report any violator of human rights to the relevant authorities for immediate action to be taken.

Multiplying by Avogadro's number we find that 55.6 moles of water contains 3.34 × 1025 molecules.

Answer:

A molecular weight often is simply referred to as a mole. Thus, 1 L of water contains 55.6 moles of water. Multiplying by Avogadro's number we find that 55.6 moles of water contains [tex]3.34 * 10^2^5[/tex] molecules.

Hope this helps :)
Pls brainliest...

The work produced by the refrigerant during this process is 163.27 kJ, and the transfer of heat is -825.63 kJ. The negative sign indicates that heat is being removed from the refrigerant.

To calculate the transfer of heat and work produced during this process, we can use the first law of thermodynamics, which states that the change in internal energy of a closed system is equal to the heat added to the system minus the work done by the system. First, we need to determine the initial and final states of the refrigerant. The initial state is 600 kPa and 150°C, and the final state is -30°C and a volume of 0.1 m³. We can use the refrigerant tables to determine the specific volume and internal energy of the refrigerant at each state. From the tables, we find that the specific volume of the refrigerant at the initial state is 0.0551 m³/kg and the internal energy is 770.68 kJ/kg. At the final state, the specific volume is 0.001344 m³/kg and the internal energy is 108.32 kJ/kg. Using the first law of thermodynamics, we can calculate the transfer of heat and work produced during this process as follows:

ΔU = Q - W

where ΔU is the change in internal energy, Q is the transfer of heat, and W is the work produced by the refrigerant.

ΔU = U2 - U1 = 108.32 kJ/kg - 770.68 kJ/kg = -662.36 kJ/kg

Q = ΔU + W

W = -Q + ΔU = -mCp(T2 - T1) + ΔU

where m is the mass of the refrigerant, Cp is the specific heat capacity of the refrigerant, T1 is the initial temperature, and T2 is the final temperature.

Assuming a mass of 1 kg for the refrigerant, the specific heat capacity of R-134a at constant pressure (Cp) is 1.51 kJ/kgK. Plugging in the values, we get:

W = -mCp(T2 - T1) + ΔU

W = -1 kg x 1.51 kJ/kgK x (-30°C - 150°C) + (-662.36 kJ/kg)

W = 163.27 kJ

for more questions on transfer

https://brainly.com/question/30738335

#SPJ11

Answer:

The lava can travel approximately 1.665 kilometers in 45 minutes.

Explanation:

The total mass of the reactants equals the total mass of the products the statement about balanced chemical equations is true. Hence, option B is correct.

This is known as the Law of Conservation of Mass, which states that matter can neither be created nor destroyed in a chemical reaction. In other words, the mass of the reactants must equal the mass of the products in a balanced chemical equation.

While the identities of the atoms may change during a reaction, the total number of atoms of each element on both sides of the equation must be the same, thus leading to the conservation of mass.

To learn more about the balanced chemical equation, follow the link:

https://brainly.com/question/28294176

#SPJ1

The volume of a 0.140 M solution of Cu(NO3)2 that contains 7.66 g of the compound, volume of the solution is 292.9 mL.

To determine the volume of a 0.140 M solution of Cu(NO3)2 that contains 7.66 g of the compound, we can use the following formula:

Molarity = moles of solute / volume of solution in liters

First, we need to calculate the number of moles of Cu(NO3)2 in the given mass of the compound:

moles of Cu(NO3)2 = mass / molar mass

The molar mass of Cu(NO3)2 can be calculated by adding the atomic masses of copper, nitrogen, and six oxygen atoms:

1 x Cu = 63.55 g/mol

2 x N = 14.01 g/mol x 2 = 28.02 g/mol

6 x O = 15.99 g/mol x 6 = 95.94 g/mol

Molar mass of Cu(NO3)2 = 63.55 g/mol + 28.02 g/mol + 95.94 g/mol = 187.51 g/mol

Now, we can calculate the number of moles of Cu(NO3)2:

moles of Cu(NO3)2 = 7.66 g / 187.51 g/mol = 0.0409 moles

Finally, we can use the formula above to calculate the volume of the solution:

0.140 M = 0.0409 moles / volume of solution in liters

Volume of solution in liters = 0.0409 moles / 0.140 M = 0.2929 L

Converting to milliliters, we get:

Volume of solution in milliliters = 0.2929 L x 1000 mL/L = 292.9 mL

Therefore, the volume of the solution is 292.9 mL.

For more such questions on volume

https://brainly.com/question/28853889

#SPJ11

The frequency of the =4 line in the Lyman series of hydrogen is 3.09 x 10¹⁵ Hz.

The energy levels in the Lyman series of hydrogen are given by the formula:

where

E is the energy of the level and n is an integer representing the level number.

The transition from level n to level 1 produces a photon with a frequency given by:

[tex]v = (E_n - E_1)/h[/tex]

where

For the n = 4 line in the Lyman series, the initial level is n = 4 and the final level is n = 1.

The energy of the initial level is:

[tex]E_4[/tex] = -13.6/4²

[tex]E_4[/tex] = -0.85 eV

The energy of the final level is:

[tex]E_1[/tex]= -13.6/1²

[tex]E_1[/tex] = -13.6 eV

The energy difference between the levels is:

[tex]E_4 - E_1[/tex] = -0.85 - (-13.6)

[tex]E_4 - E_1[/tex] = 12.75 eV

Converting to joules:

v = (12.75 x 1.6 x 10⁻¹⁹ J)/6.626 x 10⁻³⁴ J s

v = 3.09 x 10¹⁵ Hz

Learn more about the Lyman series at: https://brainly.com/question/30218733

#SPJ1

The element name or symbol is followed with a hyphen and the mass number. On the periodic table of elements, oxygen is represented by the symbol O. It has an atomic number of 8 because it has 8 protons in its nucleus

Carbon-14 or C-14 (meaning the isotope of carbon that has a mass number of 14)

The mole concept is an important method which is used to calculate the amount of the substance. 1 mole is defined as a number which is equal to 6.022 × 10²³ particles also called the Avogadro's constant.

One mole of a substance is that amount of it which contains as many particles or entities as there are atoms in exactly 12 g of Carbon-12.

The equation used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

Molar mass of NaCl = 58.44 g/mol

1. n = 8 / 58.44  = 0.13

2. n = 2.3 / 58.44 = 0.039

3. n = 9.59 / 58.44 = 0.16

4. n = 38.44 / 58.44 = 0.65

To know more about number of moles, visit;

https://brainly.com/question/30307377

#SPJ1

The equilibrium pressure of the nitrogen oxide is given as 4 atm.

Kp is the equilibrium constant for a chemical reaction in terms of partial pressures. It is defined as the ratio of the product of the partial pressures of the products raised to their stoichiometric coefficients to the product of the partial pressures of the reactants raised to their stoichiometric coefficients

We know that;

Kp = [tex]pNO_{2} ^2/pN_{2} ^2 . pO_{2}[/tex]

[tex]3.2 * 10^-28 = (2x)^2/(3.21 - 2x) (6.21 - x)\\3.2 * 10^-28 = 4x^2/19.9 - 3.21x - 12.42x + 2x^2\\3.2 * 10^-28(19.9 - 15.63x + 2x^2) = 4x^2\\6.4 * 10^-27 - 5 * 10^-27 x + 6.4 * 10^-28x^2 = 4x^2\\x = 4 atm[/tex]

Learn more about Kp:https://brainly.com/question/30550192

#SPJ1

When a mixture of 1,20 g H2(g) and 7.45 g CO are allowed to react, 0.2659 moles of methanol could be produced from the given mixture.

The balanced chemical equation for the reaction between H2 and CO to form methanol (CH3OH) is:

H2(g) + CO(g) → CH3OH(l)

To determine how many moles of methanol could be produced, we need to first determine the limiting reactant.

This is the reactant that will be completely consumed in the reaction and will limit the amount of product that can be formed.

The molar mass of H2 is 2.016 g/mol, so 1.20 g of H2 is:

1.20 g H2 × (1 mol H2/2.016 g H2) = 0.5952 mol H2

The molar mass of CO is 28.01 g/mol, so 7.45 g of CO is:

7.45 g CO × (1 mol CO/28.01 g CO) = 0.2659 mol CO

Now we can use the mole ratio from the balanced equation to determine which reactant is limiting:

1 mol H2 : 1 mol CO : 1 mol CH3OH

0.5952 mol H2 : 0.2659 mol CO : x mol CH3OH

The limiting reactant is CO, since it produces less moles of CH3OH than the H2. Therefore, the amount of methanol that could be produced is:

0.2659 mol CO × (1 mol CH3OH/1 mol CO) = 0.2659 mol CH3OH

Thus, 0.2659 moles of methanol could be produced from the given mixture.

For more details regarding moles, visit:

https://brainly.com/question/31597231

#SPJ1

The mass of CO₂ needed to fill the zip-top bag by converting the moles is 4.4817 g CO₂

To determine the mass of CO₂, know the number of moles of CO₂ and its molar mass. The formula to calculate the mass of CO₂ is:

mass of CO₂ = number of moles of CO₂ x molar mass of CO₂

The number of moles of CO₂ can be calculated using the Ideal Gas Law, which relates the number of moles of a gas to its pressure, volume, temperature, and gas constant.

Once calculated the number of moles of CO₂, multiply it by the molar mass of CO₂ to obtain the mass of CO₂. The molar mass of CO₂ is approximately 44 g/mol.

For this case the mass of CO₂ after conversion is 0.102 mol CO₂ x 44.0099 g/mol CO₂ = 4.4817 g CO₂

Find out more on Ideal Gas Law here: https://brainly.com/question/12873752

#SPJ1