The following is the product of the given reaction and the balanced form: 2FePO4 + 3Cu(OH)2 = Cu3(PO4)2 + 2Fe(OH)3 (option C).
How can a chemical reaction be balanced?
A chemical reaction occurs when two or more reactants combine to produce products.To balance the reaction, the number of moles of each element on both sides of the equation must be equal. The following reaction is given in response to this question: Cu3(PO4)2 + Fe(OH)3?
Cu3(PO4)2 + 2Fe(OH)3 2FePO4 + 3Cu(OH)2 is the product of the given reaction and the balanced form.
To learn more about reactionplease click on below link
https://brainly.com/question/28984750
#SPJ4
in a mixture of gases with a total pressure of 15.0 bar, oxygen has a mole fraction of 0.41. what is the partial pressure of oxygen?
The partial pressure of oxygen would be 6.15 bar in a mixture of gases with total pressure of 15 bar, having oxygen the mole fraction of 0.41.
What is mole fraction and partial pressure and how the partial pressure comes out to be 6.15?Mole fraction is the ratio of number of components in one compartment to the total number of components present in a solution.Partial pressure is the individual pressure of a molecule in a mixture of molecules in a container.Here is given the total pressure that is P = 15 bar, and the mole fraction of oxygen that is X = 0.41.As we know the partial pressure of any gas can be calculated by multiplying the total pressure with mole fraction.15 bar x 0.41 = 6.15 partial pressure of O2, hence the partial pressure of oxygen in a mixture of gases would be 6.15 bar.To know more about pressure visit:
https://brainly.com/question/12971272
#SPJ4
What quantity of heat is required to raise the temperature of 450 grams of water from 15°C to 85°C? The specific heat capacity of water is 4.18 J/g °C.
0.0000121 J
132,000 J
0.0000152 J
152,000 J
Quantity of heat is required to raise the temperature of 450 grams of water from 15°C to 85°C, specific heat capacity of water is 4.18 J/g °C is 132000 J.
The expression for the specific heat capacity is given as :
Q = mc ΔT
where,
mass , m= 450 g
specific heat, c = 4.18 J/g °C
ΔT = 85 °C - 15 °C = 70 °C
Q = 450 ×4.18 × 70
Q = 132000 J
Thus, Quantity of heat is required to raise the temperature of 450 grams of water from 15°C to 85°C, specific heat capacity of water is 4.18 J/g °C is 132000 J.
To learn more about specific heat capacity here
https://brainly.com/question/11297584
#SPJ1
Compare and contrast what three elements do all macromolecules share? explain how the chemical properties of lipids, nucleic acids, and proteins differ from carbohydrates.
Both the hydrogen and carbon atoms are present in every macromolecule.
How do macromolecules work?The molecules made up of smaller units are referred to as macromolecules. They are referred to as monomers. The macromolecules that are relevant to this discussion are those that may be present in the human body.
As we can see, biological macromolecules are frequently quite big. This is due to the fact that macromolecules often consist of a large number of units linked together. To create the macromolecules of proteins, lipids, carbohydrates, and nucleic acids, thousands of monomer molecules are bonded together.
The carbon atom and the hydrogen atom are present in every macromolecule. These are present in every macromolecule. The carbonyl bond is present because the carbs are lowering sugars. Lipids, nucleic acids, proteins, and amino acids do not undergo carbonyl reduction processes because they do not contain a carbonyl group.
To know more about macromolecules visit:
https://brainly.com/question/28488020
#SPJ4
How do you handle leakage current?.
Certified control panel should be used and the cables and insulations for damage and replace the damaged one to avoid leakage current.
Leakage current flows when there is an electrical connection between the ground and a conductor. If the equipment is not grounded correctly the current will flow through other conductors. In the case of electrical devices, leakage current usually occurs as a result of faults in insulation or the fabrication of materials used to make parts such as semiconductors. The best ways to prevent leakage current are to always use shielded cables on motor installations and to make sure that these cables are grounded at both ends. and we have to also check cables and insulation for damage and replace ones that are broken or damaged.
To learn more about Leakage current please visit:
https://brainly.com/question/14096107
#SPJ4
A 2. 26 l balloon of helium is at 30°c and 1. 61 atm, what is the pressure if the volume is increased to 4. 12 l?.
Answer:
0.8832 atm
Explanation:
Per Boyle's Law:
If the temperature is held constant, the volume of a fixed amount of gas is inversely proportional to its pressure:
V∝[tex]\frac{1}{P}[/tex]
and
[tex]P_1V_1=P_2V_2[/tex]
To find pressure resulting from a change in volume:
[tex]\frac{P_1V_1}{V_2}=P_2[/tex]
So:
[tex]P_1=1.61atm\\V_1=2.26L\\V_2=4.12L\\P_2=\frac{(1.61atm)(2.26L)}{4.12L}\\P_2=0.8832atm[/tex]
This answer makes sense because Boyle's Law states that a given volume of gas at a constant temperature should have a proportionally lower pressure as the volume is increased.
Electrolytes help control fluid balance via __________, the movement of water through a semipermeable membrane based on solute concentration.
Electrolytes help control fluid balance via osmosis , the movement of water through a semipermeable membrane based on solute concentration.
What is osmosis?Osmosis is the spontaneous diffusion or flow of water or other solvents over a semipermeable membrane (one that prevents the passage of solutes, or dissolved compounds). German plant physiologist Wilhelm Pfeffer conducted the first in-depth study of the crucial biological process in 1877. Prior researchers had conducted less precise examinations of leaky membranes (such as animal bladders) and the transport of water and escape chemicals through them in opposite directions.
Thomas Graham, a British scientist, coined the broad term osmose (now osmosis) in 1854. The solution will tend to become more diluted by absorbing solvent through the membrane if it is separated from the pure solvent by a membrane that is permeable to the solvent but not the solute.
To know more about osmosis, visit:
https://brainly.com/question/1799974
#SPJ4
in a solution that is 90% ethyl alcohol and 10% water, the solute is and the solvent is . g
In a solution that is 90% ethyl alcohol and 10% water, the solute is 10 g and the solvent is 90 g.
given that :
The solute in the solution by mass percent = 10 %
mass percent = ( mass of solute / mass of solution ) × 100%
mass of solute in the solution is = 10 g
The solvent present in solution by mass percent = 90 %
the mass of solvent in the solution is is 90 g
Thus, In a solution that is 90% ethyl alcohol and 10% water, the solute is 10 g and the solvent is 90 g.
To learn more about solute and solvent here
https://brainly.com/question/7932885
#SPJ4
At standard temperature and pressure, carbon dioxide has a density of 1. 98 kg/m^3. What volume does 0. 85 kg of carbon dioxide occupy at standard temperature and pressure?.
At STP, oxygen will have the same density as hydrogen at 4386 K and 1 atm. Equation 1 is solved for the following values: As a result, oxygen will have the same density as hydrogen at STP at 4386 K and 1 atm.
How is the gas law of Boyle calculated?The pressure (p) of a given quantity of gas changes inversely with its volume (v) at constant temperature, according to this empirical connection, which was established by the scientist Robert Boyle in 1662. In equation form, this means that pv = k, a constant.
Place an enormous piston or sealed syringe on its end, and then pile on more and more things.
The volume of air within will decrease as the pressure increases since these two numbers are inversely related.
learn more about gas law of Boyle refer
https://brainly.com/question/1696010
#SPJ4
a balloon is filled with co2 at 1.0 atm. if the balloon is placed at the bottom of the pool of water where the pressure is 2.0 atm, what will happen to the volume?
If the balloon is placed at the bottom of pool of water where pressure is 2.0 atmospheres, the volume of carbon dioxide in balloon will decrease as pressure and volume are inversely proportional.
What is pressure?Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.
There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .
It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.
Learn more about pressure,here:
https://brainly.com/question/18107358
#SPJ1
Why is it important for the surface area-to-volume-ratio of exchange surfaces to be maximized?.
It important for the surface area-to-volume-ratio of exchange surfaces to be maximized because it provides more space for the diffusion of gases.
Explain Adaptations of exchange surfaces?In order to breathe, organisms must take in oxygen and expel carbon dioxide from their bodies. Since these gases spread across exchange surfaces like the lungs, exchange surfaces are modified to maximize diffusion.
A short diffusion pathway across the exchange surface is ensured by the fact that the majority of gas exchange surfaces are incredibly thin (sometimes only one cell thick). Additionally, they will have a high surface area to volume ratio, which creates greater room for gas diffusion.
Additionally, the organism will have characteristics that maximize the differential in gas concentration across the exchange surface.
To know more about exchange surface, visit:
https://brainly.com/question/14214269
#SPJ4
why are the bakelite phenol molecules substitutes only at the ortho and para positions and the meta positions
The bakelite phenol molecules substitute only at the ortho and para positions because the substituents are ortho para direction.
Bakelite is formed from the response of phenol and formaldehyde. essentially, it's far shaped in two steps. within the first step, formaldehyde reacts with phenol and produces o-Hydroxymethyl phenol. Then o-Hydroxy methyl phenol and phenol come collectively and shape Bakelite.
Polyoxybenzylmethylenglycolanhydride, higher known as Bakelite is a thermosetting phenol formaldehyde resin, fashioned from a condensation response of phenol with formaldehyde.
Bakelite is obtained by the condensation reaction of phenol and formaldehyde. it's miles utilized in making electrical switches and switchboards. it is a thermosetting polymer due to the fact on heating it undergoes full-size cross-linking inside the mold.
Learn more about formaldehyde here:-https://brainly.com/question/28366450
#SPJ4
Draw the lewis structure (including resonance structures) for methyl azide (ch3n3).
While the N atom coupled to just one (1) Nitrogen atom has a - formal charge, the N atom bound to two (2) Nitrogen atoms has a + formal charge.
How is a Lewis structure composed?Determine the total number of valence electrons in step 1. Write down the molecule's skeleton in step two. In the third step, each bond in the skeleton structure is formed using two valence electrons. Step 4: Make an effort to fill the atoms' octets by assigning the leftover valence electrons to nonbonding positions.
CH₃N₃ typically has two resonance configurations.
The N atom has a + formal charge when it is bound to two Nitrogen atoms, whereas it has a - formal charge when it is connected to only one Nitrogen atom in both forms.
To know more about Lewis structure visit:
https://brainly.com/question/12318888
#SPJ4
what a substance was dissolved in water, the temperature of the water increases. this process is described as
This process is described as exothermic, with the release of energy.
Temperature is a bodily amount that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have trusted diverse reference points and thermometric substances for definition.
Temperature performs a essential function in hospital treatment (each human beings and animals), meals, liquids, and agriculture. Our common health is frequently reliant upon temperature in many approaches as nicely. Retaining right temperature levels in clinical bloodless garage areas is vital.
Air temperature is measured by thermometers. Not unusual thermometers encompass a pitcher rod with a completely skinny tube in it. The tube contains a liquid this is furnished from a reservoir, or "bulb," at the base of the thermometer.
Learn more about Temperature here:-https://brainly.com/question/26866637
#SPJ4
The element Chromium has 4 naturally occurring isotopes. Use the relative abundance of each to calculate the average atomic mass of chromium. (Must show work!)
Cr-50 = 4.34%, Cr-52 = 83.79%, Cr-53 = 9.50%, Cr-54 = 2.37%
According to the given statement The average Cr atomic mass unit is 51.9963 amu.
What defines the atomic mass?A single atom's atomic mass is only its total mass, and it is usually given in atomic mass units, or amu. A carbon atom with six neutrons, or helping students learn, has an atomic mass of Twelve amu by definition.
Do elements have atomic mass?The entire weight of one atom in an element is referred to as its atomic mass. The atomic mass is its average atomic mass given in atomic mass units (amu, also known as daltons, D). Atomic weight is another name for the atomic number.
Briefing:Chromium exists in four isotopes that are naturally occurring: 50Cr (atomic mass: 49.9460 amu), 52Cr (atomic mass: 51.9405 amu), 53Cr (atomic mass: 52.9407 amu), and 54Cr (atomic mass: 2.37% amu).
To know more about Atomic mass visit:
https://brainly.com/question/5566317
#SPJ1
Approximately how much of the oxygen in the atmosphere is absorbed by the ocean?.
The oceans take in between 50 to 80 percent of the oxygen in the atmosphere. 50 to 80 percent of the oxygen produced on Earth, according to scientists, is produced in the ocean.
Oceanic plankton, which includes algae, floating plants, and some bacteria that can atmosphere, are responsible for the majority of this output. The tiniest photosynthetic organism on Earth is a specific species called Prochlorococcus.
The layer of gases that surrounds the planet and is held in place by Earth's gravity is known as the atmosphere or air. The atmosphere of Earth shields life on the planet by maintaining the pressure necessary for liquid water to exist on the surface, absorbing ultraviolet sun radiation, and warming the surface by retaining heat.
The chemical element with the letters O and the atomic number 8 is called oxygen.
Learn more about atmosphere here
https://brainly.com/question/28310375
#SPJ4
an unknown ideal gas is found to have a density of 3.16 g/l at stp. what could the gas be? molar masses are listed after each gas.
Pentane is a gas with a molar mass of 70.0 g/mol. At STP, a mole of a gas takes up 22.4 L of space. At STP, the gas has a density of 1.43 g/L. Gas in 22.4 L has a mass of 1.43 g/L22.
The Greek letter rho, or, is used to represent it. The temperature and pressure of the air affect the density of the air, or how light it is. The density of air is typically expressed as STP (standard temperature and pressure). One atmosphere of pressure at absolute zero is known as STP. Only links in the afflicted VLAN are impacted when the spanning tree failure is contained to a single VLAN.
Learn more about temperature here-
https://brainly.com/question/13294753
#SPJ4
The molar mass of the particular gas is equal to 70.8grams /mole
The equation for the Ideal Gas Law is:
PV=nRT
where;
P is the pressure of the particular gas in atm
V is the volume in liters
n is the number of moles of the particular gas
R is a gas constant (0.082056 L-atm/mol-K)
T is the temperature in Kelvin
We can perform modification or rearrangement to the equation to equate density of the gas to its molar mass.
PV=nRT
PV=(mass/Molar mass)RT
Molar mass=(mass)×RT/PV
where mass over volume (m/V) is equal to density
The equation will become:
Molar mass=density ×RT/P
We can now substitute the given values to determine the molar mass of the particular gas. The temperature at STP condition is equal to 273.15 K while the pressure is equal to 1 atm.
Molar mass=density ×RT/P
Molar mass=(3.16×grams/L)×(0.082056×273.15)/(1atm)
Molar mass=70.8grams/mole
to know more about Molar mass click
https://brainly.in/question/48308900
#1234
Calcium phosphate is widely found in nature in the form of natural minerals. It is also found in bones and some kidney stones. In one case a sample is found to contain 0.256 moles of phosphorus. How many moles of Ca3(PO4)2 are in that sample?
Answer:
There are 1.024 moles of Ca3(PO4)2 in the sample.
Explanation:
what number of moles of o2 is needed to produce 14.2 grams how many carbon atoms are contained in 2.8 g of c2h4 ? p4o10 from p? (molecular weight p4o10
0.250 moles of o2 is needed .
What is moles?
A mole is merely a measuring unit. In reality, it is one of the International System of Units' seven foundation units (SI). When existing units are insufficient, new units are created. Chemical reactions frequently occur at levels where using grammes would be inappropriate, but using absolute numbers of atoms/molecules/ions would also be misleading. As a result, scientists devised the mole to bridge the gap between extremely small and extremely huge numbers.
In the International System of Units, the mole (sign mol) is the unit of material amount. The amount of substance is a measurement of how many elementary entities of a certain substance are present in an object or sample. The mole is defined as having 6.022140761023 elementary entities.
The number of moles of
P4O10
can be obtained by dividing the given mass by the molecular weight of the compound:
mol P4O10=14.2
g×mol284g=0.05mol
The balanced chemical equation is:
P4+5O2→P4O10mol
O2=0.05
molP4O10× mol
O21 mol
P4O10=0.25 mol
0.250 moles of o2 is needed
Learn more about moles from given link
https://brainly.com/question/15356425
#SPJ4
what is the molarity of a solution made by adding 50 ml of 2.00 m nitric acid with enough water to make 450.0 ml of solution?
A solution that is created by adding 50 ml has a molarity of 9Moles. Nitric acid is an acid that produces one hydrogen ion and one nitrate ion.
Molarity calculator : What is it?The mass of the substance needed to produce a particular molar concentration and volume is determined by the molarity calculator.
How can I translate m2 to volume?We all know that a square meter is a unit of area and a cubic meter is a unit of volume. When we multiply length, breadth, and thickness, we obtain cubic meters, and when we multiply length by breadth, we get square meters.
What volume is 1 mL?The volume unit in the metric system is the milliliter, represented by the letters ml or ml. One cubic centimeter, or one liter, is equal to 1,000 milliliters. In the imperial system, that amounts to only 004 of a c.
To know more about molarity of a solution visit:-
https://brainly.com/question/16587536
#SPJ4
which two of the following securities may be included in the strips program to create zero-coupon securities? treasury bills treasury notes tips treasury bonds
Bonds known as zeros don't offer any interest or coupons.With a zero, you pay less than the bond's face value when you buy it, and you don't get interest payments; instead, you're given the bond's face value when it matures.
Zero-coupon When stock prices fall, the cost of U.S. Treasury bonds—also known as Treasury zeros—often rises sharply.Zero-coupon The price of US Treasury bonds may rise dramatically if the Fed quickly cuts rates.
Zero-coupon U.S. Treasury bonds offer a modest risk-return profile when held alone.traditional zero-coupon Treasury bonds are more erratic than the stock market, despite providing lower long-term returns than US Treasuries.
What's worse is that there is no assurance they will increase when stocks do poorly.In 2008, Treasury zeros performed remarkably well, but they lost money in 2018 along with the stock market.
Learn more about treasury bills:
https://brainly.com/question/28908607
#SPJ4
if a weather report gives the atmospheric pressure as 31.5 in. of mercury, what is the pressure in kpa? (1 in.
The pressure of the atmosphere according to the weather report is Kpa is 4851.568 Kpa.
The weather report give the atmospheric pressure to be 31.5 in of mercury.
Converting 31.5 inch into cm,
The height of mercury column is 80.01 cm.
We know, the pressure given by the mercury column is given by,
P = pgH
Where,
p is the density of mercury,
g is the acceleration due to gravity,
H is the height of the mercury column.
So, putting values,
P = 80.01 x 136000 x 80.01/100
P = 4851568 pa.
So, the pressure of the atmosphere according to the weather report is 4851.568 Kpa.
To know more about pressure, visit,
https://brainly.com/question/28012687
#SPJ4
The most common isotope of uranium has an atomic number of 92 and mass number of 238. If a uranium atom alpha decays and emits a helium nucleus, what will the atomic number of the daughter nucleus be?.
The most common isotope of uranium has an atomic number of 92 and mass number of 238. If a uranium atom alpha decays and emits a helium nucleus the atomic number of the daughter nucleus be is 234
Isotopes are the member of family of an element that all have the same number of proton but different number of neutron and the nucleus of uranium 238 decay by alpha emission to form a daughter nucleus and the thorium 234 this thorium in turn transform into protactinium 234 and then undergo beta negative decay to produce uranium 234
And uranium 238 undergoes alpha decay to become thorium 234 and in this reaction uranium 238 loses two proton and two neutron to become the element thorium 234
Know more about uranium
https://brainly.com/question/14503524
#SPJ4
the largest magnetic quantum number (m or ml) of an atom in the ground state is found to be 6. what must be the largest principal quantum number (n)?
The magnetic quantum number (m or ml) of an atom in the ground state is found to be 6. The largest principal quantum number of that atom is 4.
The magnetic quantum number(ml) of an atom determines the number of orbitals and the orientation present in the atom. To find out principal quantum number, first we need to find out the angular quantum number, which is l. It is calculated by the formula
m or ml=(2l+1)
The value of ml is 6. Plug the value in the formula
6=(2l+1)
2l=6-1
2l=5
l=5/2
If we round off this value to the nearest integer, then the value is 6/2 which is equal to 3.
When l=3, then the value of principal quantum number is calculated using the formula
l=n-1
Rearrange the formula for n and solve for n
n=l+1
n=3+1
n=4
Hence, the value of n is 4.
Therefore, the largest principal quantum number of the atom is 4.
To know more about quantum numbers
https://brainly.com/question/16977590
#SPJ1
The field of chemistry had incredible advancements in a very short time period, from the mid-1800s to the early 1900s. It was during this time period that the scientific community saw the need for the regulation of the growing number of chemical discoveries. What were the early committees trying to regulate?.
Earlier the committees were trying to regulate the naming of the discovered elements.
The elements, their properties, and other information relating to them were so chaotic prior to the regulations being applied to the area of chemistry that it was slowing down advancement.
Therefore, in order to be used more effectively, the committees decided to govern things like the names of any newly found elements and whatever attributes they may have.
To know more about, elements, click here,
brainly.com/question/12781141
#SPJ4
If you were to combine two carbon-12 atoms in a fusion process, what element would you get?.
If you were to combine two carbon-12 atoms in a fusion process then Mg element would you get
Carbon 12 is the particular importance in its use as the standard from which atomic mases of all nuclide are measured and its atomic mass is exactly 12 Dalton by its definition and carbon 12 is composed of 6 proton and 6 neutron and 6 electron and magnesium 24 nucleus has same nucleon as two carbon 12 nuclei and the reaction is therefore a fusion of two carbon 12 nuclei and the no other particles are produced
Know more about fusion
https://brainly.com/question/20240443
#SPJ1
Which of the following can contain more than two valence electrons in its outer most shell?
O Helium
O Hydrogen
O Zinc
O Oxygen
If you are given 100. g of carbon dioxide at STP, how many L would you have?
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, 50.8L of volume would be occupy by carbon dioxide at STP.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas
V= volume of gas
n =number of moles of gas
T =temperature of gas
R = Gas constant = 0.0821 L.atm/K.mol
Mole= given mass÷ Molar mass
mole= 100. g÷ 44.01 g/mol
=2.27moles
One mole of ideal gas contain 22.4L of volume
2.27moles of ideal gas contain 22.4L×2.27=50.8L of volume
Therefore, 50.8L volume would be occupy by carbon dioxide at STP.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ1
Calcium is an element. What is the smallest particle of calcium that has the same chemical properties of calcium?.
The tiniest calcium particle with calcium, Chemical properties is called an atom. The smallest component of an element, an atom has exactly the same chemical makeup as the element as a whole.
First off, that is inaccurate, and your justification is plagiarism. The smallest calcium particle that possesses calcium's chemical properties is an atom. Any attribute that can only be generated by altering a substance's chemical identity is referred to as a chemical property. Chemical properties include any of a material's properties that emerge during or after a chemical reaction. Simply put, it is impossible to detect a substance's chemical qualities by looking at it or touching it; instead, a significant amount of the substance's internal structure must be altered in order to explore its chemical properties.
Learn more about calcium here
https://brainly.com/question/4023397
#SPJ4
What character would be the best example of an archetype 1. 1 3?.
We all come across archetypes, which are recurring patterns, images, or feelings. Because archetypes do not physically manifest themselves, they appear to be more intellectual than physical.
It's similar to the account of God appearing to Moses, but only allowing Moses to view a portion of him since "no one may see me and survive" . They do, however, appear as "archetypal images" and recurring themes in consciousness. They act as influences that combine psychic materials into recognizable visuals. For instance, the stereotype of the Wicked Stepmother — You know what she looks like, at least to you, even if I haven't given a description. That mental picture you have is an archetypal picture. Even though I'm not making any specific suggestions, you can comprehend not only how she looks but also her psychic impact.
Even if you have never had a stepmother, the wicked stepmother in Cinderella resonates because of the Wicked Stepmother archetype.
To know more about archetype please refer:
https://brainly.com/question/1855370
#SPJ4,
What is the estimated effective nuclear charge, zeff, experienced by an electron in a 3p orbital of a chlorine atom?.
The estimated effective nuclear charge experienced by a 3 p electron of chlorine is 6.1.
It is the charge felt by any many-electron atom's outermost valence electrons. This is accomplished by taking into account the quantity of shielding electrons surrounding the nucleus.
It is used to assess the actual nuclear charge that an electron in a multi-electron atom experiences. This rule states that an electron's actual nuclear charge is less than its actual nuclear charge because of screening by other electrons in the atom.
The arrangement of an atom's electrons in its atomic orbitals is known as its electronic configuration. J. J. Thompson made the discovery of the electron. J. J. Thompson made the electron discovery in 1887. Every atom consists of a hefty nucleus that is encircled by electrons.
Learn more about electron:
https://brainly.com/question/26084288
#SPJ4
